Street Light Module Series 63in1 Street Lighting Module ...
Transcript of Street Light Module Series 63in1 Street Lighting Module ...
Typical Applications :
■ Street Lighting
■ Spot light
■ High / Low Bay
Features :
■ High Brightness SMD LED
■ Low Power Requirement & Energy Efficient
■ Suitable for Restricted Space
■ Waterproof Level IP66 (Wet Location)
■ Easy design-in, fast time to market
■ Typical luminous efficacy: 110lm/W (under hot luminous test)
■ High quality of light and low glare without scattered light
■ Long lifetime: 50,000 hours with Edison’s LM-80 certified components (EMC 3030)
■ Better heat dissipation performance
63in1 Street Lighting Module Datasheet
Street Light Module Series
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 1
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 2
Table of Contents
General Information .........................................................................................................................................................3
Mechanical Dimensions ..................................................................................................................................................4
Absolute Maximum Ratings ..........................................................................................................................................5
Technical Data ....................................................................................................................................................................5
Light Patterns ......................................................................................................................................................................7
Substrate Temperature Measurement Point ...........................................................................................................7
Assembly Instruction .......................................................................................................................................................7
Driver Recommendation (MW) ....................................................................................................................................8
Driver Recommendation (Inventronics) ....................................................................................................................9
Waterproof Connectors Recommendation .............................................................................................................10
System overview ................................................................................................................................................................11
Package Information ........................................................................................................................................................12
Revision History .................................................................................................................................................................13
About Edison Opto ...........................................................................................................................................................13
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 3
General Information
In view of the energy saving and long lifetime advantages of LED, replacing traditional street light with LED lighting is an inexorable trend. Integrating LED packaging and optical design abilities, Edison Opto provides an IP66 waterproof solution-63in1 street light module whose secondary optical design is based on the ME3 requirements. It delivers homogeneous illumination with lower energy consumption, providing safe and bright road environments. 63in1 Street Light Module is suitable for general road and fast road.
Introduction
Product Nomenclature
6 S A D - 0 0 x x x x 7 x x 0 xX1-X2 X3 X4 X5 X6-X7 X8-X11 X12 X13-X14 X15-X16
X1-X2Product Module
X3Module Series
X4Power
X5-
X6-X7Watt
Code Type Code Type Code Type Code Type Code Type
6SStreet Light
ModuleA 63in1 PLCC 3030 D DC - - 00 non Driver
X8-X11Beam Angle
X12CRI
X13-X14Color
X15-X16Serial Number
Code Type Code Type Code Type Code Type
715M 70x150-M 7 CRI70 40 4000K - -
0090 90o 50 5000K
57 5700K
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 4
Unit: mmTolerance: ± 2.0 mm
Mechanical Dimensions
此標示面曬LDK1006M紋
245.27±0.3<A>
2*40.00±0.15<C>2*115.00±0.3<B>
70.27±0.2<D>
2*29
.00±0.1<E>
9.60
6.76
2.70± 0.05
1.00
2.50±0.1<F>
A A
B
B
SECTION A-A
A
B
300.0
287.0
30 70
300.0
287.0
5.5
30 70
6SAD-00xxxx7xx03/ 6SAD-00xxxx7xx04/ 6SAD-00xxxx7xx05
49.6
49.6
Angle:90o Angle:70x150o whirl 90o
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 5
Technical Data
Parameter Rating/Value Units
Power Consumption 40 50 60 W
Typ. Flux 4500 5300 6200 lm
Typ. Operating Voltage 52 53 55 V
Typ. Operating Current 700 860 1050 mA
Color Temperature 4000/5000/5700 K
CRI 70 --
Weight 650 g
Notes:1. The typ. flux item is operating on hot luminous test with 2 hours.2. Flux is measured with an accuracy of ±15%.3. Forward Current is measured with an accuracy of ±10%.4. Power consumption has ±10% tolerance.5. Weight has ±50g tolerance.6. Driver Recommendation Specification 50~60V.7. Never plug the driver to AC outlet before the Module is properly connected; otherwise, it may damage the LEDs permanetly.
Parameter Symbol Rating Units
Casing Temperature Tc 80 °C
Operating Temperature Topr -40 ~ +50 °C
Storage Temperature Tstg -20 ~ +60 °C
Absolute Maximum Ratings
Notes:1. Proper current derating must be observed to maintain casing temperature below the maximum at all time.2. LEDs are not designed to be driven in reverse bias.3. The operating temperature* is based on the ambient temperature to the heatsink in 5 cm distance.
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 6
Order Code Beam Angle Safety CCT (K) CRI Dimension (mm)
6SAD-00715M74003 70x150o CE
4000
70 300
6SAD-00715M74004 70x150o UL
6SAD-00715M74005 70x150o whirl 90o CE
6SAD-00009074003 90o CE
6SAD-00009074004 90o UL
6SAD-00715M75003 70x150o CE
5000
6SAD-00715M75004 70x150o UL
6SAD-00715M75005 70x150o whirl 90o CE
6SAD-00009075003 90o CE
6SAD-00009075004 90o UL
6SAD-00715M75703 70x150o CE
5700
6SAD-00715M75704 70x150o UL
6SAD-00715M75705 70x150o whirl 90o CE
6SAD-00009075703 90o CE
6SAD-00009075704 90o UL
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 7
Assembly Instruction
Street light module Driver supply Street light assembly
+ +
Notes:1. Use M6 screw to secure the lamp on a level surface.2. Push and lock the module.
Ts points
Notes: 1. It strongly recommend to check the temperature of Ts be below 80oC while thermal design. 2. Ts: Substrate temperature measurement point
Driver
AC Input
Substrate Temperature Measurement Point
Light Patterns
Beam Angle 70ox150o & 70x150o whirl 90o Beam Angle 90o
1515
105
90
75
60
4530
90
75
60
4530
1200160020002400
400800
0
105
1515
105
90
75
60
4530
90
75
60
4530 0
105
500600
300
100200
400
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 8
Part. No Picture SPC Solution
HLG-40H-54A DC Output Voltage 54VdcRated Output Current 0~0.75AAC Input Voltage 90~305V
For 1 pcs 40W
HLG-60H-54A DC Output Voltage 54VdcRated Output Current 0~1.15AAC Input Voltage 90~305V
For 1 pcs 40W/50W/60W
HLG-80H-54A DC Output Voltage 54VdcRated Output Current 0~1.5AAC Input Voltage 90~305V
For 2 pcs 40W For 1 pcs 60W
HLG-100H-54A DC Output Voltage 54VdcRated Output Current 0~1.77AAC Input Voltage 90~305V
For 2 pcs 40W/50W
HLG-120H-54A DC Output Voltage 54VdcRated Output Current 0~2.3AAC Input Voltage 90~305V
For 3 pcs 40WFor 2 pcs 50W/60W
HLG-150H-54A DC Output Voltage 54VdcRated Output Current 0~2.8AAC Input Voltage 90~305V
For 4 pcs 40WFor 3 pcs 50WFor 2 pcs 60W
HLG-185H-54A DC Output Voltage 54VdcRated Output Current 0~3.45AAC Input Voltage 90~305V
For 4 pcs 40WFor 4 pcs 50WFor 3 pcs 60W
HLG-240H-54A DC Output Voltage 54VdcRated Output Current 0~4.45AAC Input Voltage 90~305V
For 5~6 pcs 40WFor 5 pcs 50WFor 4 pcs 60W
HLG-320H-54A DC Output Voltage 54VdcRated Output Current 0~5.95AAC Input Voltage 90~305V
For 6 pcs 50WFor 5 pcs 60W
HLG-600H-54A DC Output Voltage 54VdcRated Output Current 0~11.2AAC Input Voltage 90~305V
For 6 pcs 60W
Driver Recommendation (MW)
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 9
Part. No Picture SPC Solution
EUC-052S070SVDC Output Voltage 38~75Vdc
Rated Output Current 0.7AAC Input Voltage 90~305V
For 1 pcs 40W
EUC-085S070SVDC Output Voltage 61~121Vdc
Rated Output Current 0.7AAC Input Voltage 90~305V
For 2pcs 40W
EUC-150S070SVADC Output Voltage 107~214Vdc
Rated Output Current 0.7AAC Input Voltage 90~305V
For 3pcs 40W
EUC-200S070SVDC Output Voltage 171~285Vdc
Rated Output Current 0.7AAC Input Voltage 90~305V
For 4~5pcs 40W
EUC-052S070SV-HP02DC Output Voltage 41~61VdcRated Output Current 0.84AAC Input Voltage 90~305V
For 1pcs 50W
EUC-100S070SV-HP01DC Output Voltage 90~122Vdc
Rated Output Current 0.84AAC Input Voltage 90~305V
For 2pcs 50W
EUC-150S070SV-HP01DC Output Voltage 128~176Vdc
Rated Output Current 0.86AAC Input Voltage 90~305V
For 3pcs 50W
EUC-200S070SV-HP01DC Output Voltage 171~235Vdc
Rated Output Current 0.86AAC Input Voltage 90~305V
For 4pcs 50W
EBC-255S105SV-0004DC Output Voltage 160~290Vdc
Rated Output Current 0.86AAC Input Voltage 175~305V
For 5pcs 50W
EUC-075S105SVDC Output Voltage 36~72VdcRated Output Current 1.05AAC Input Voltage 90~305V
For 1pcs 60W
EUC-150S105SVADC Output Voltage 71~142Vdc
Rated Output Current 1.05AAC Input Voltage 90~305V
For 2pcs 60W
EUC-200S105SVDC Output Voltage 114~190Vdc
Rated Output Current 1.05AAC Input Voltage 90~305V
For 3pcs 60W
EUC-320S105SVDC Output Voltage 152~304Vdc
Rated Output Current 1.05AAC Input Voltage 90~305V
For 4pcs 60W
Driver Recommendation (Inventronics)
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 10
Picture Description
IP68 connector for 1 modules in series (40W/50W/60W)
IP68 connector for 2 modules in series(80W/100W/120W)
IP68 connector for 3 modules in series (120W/150W/180W)
IP68 connector for 4 modules in series (160W/200W/240W)
IP68 connector for 5 modules in series (200W/250W/300W)
Waterproof Connectors Recommendation
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 11
63in1 street light modules are for use with LED drivers and waterproof connector the interface. In this combination, the LED modules and the LED drivers provide convenient and parallel connection series circuit.
Driver
Driver
Driver
Driver
Driver
AC Input
AC Input
AC Input
AC Input
AC Input
System overview
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 12
Package Information
Notes:1. Pack Dimensions for Industrial Packaging : 610*470*160mm2. Total weight for Industrial Packaging : 16KG (weight of empty packaging 3KG)
10pc /Paper tray 2Paper tray/ Carton 20pc/ Carton
Marking Label Specifications
Product Code:6SAD-00wwww7yyzzInput Voltage :DC 50-60V Input Current :Max 1.05A (60W)Beam Angle :70x150°-MColor/CCT : 5000KDate:2015/10
IP66
UL NO. E476352Product Code: 6SAD-00wwww7yyzzInput Voltage :DC 50-60V Input Current :Max 1.05A (60W)Beam Angle :70x150°-MColor/CCT : 5000KDate:2015/10For Wet Location
Packing Label Specifications
IP66 for CE Marking Label
Wet Location for UL Marking Label
1. Part Name : 6SAD-00wwww7yyzz2. Spec:X1 X2 X3 - x1 : spec of Max. rating - x2 : spec of Typ. Module Color - x3 : spec of Beam Angle3. Bin: X1 X2 - x1 : Bin of LED Luminous Flux - x2 : Bin of LED Color Temperature4. Quantity :Q’ty5. Date : Period of manufacture
Marking Label
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 13
Revision History
Versions Modification Date
1 Establish Order code information 2015/11/24
2
Delete 275mm informationDelete 3500K Order codeAdd 5700K Order codeUpdate angle 70x150o whirl 90o information
2016/04/21
3 Add module Angle picture 2016/05/18
About Edison Opto
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at www.edison-opto.com
Copyright©2016 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice.
www.edison-opto.com
For general assistance please contact:[email protected]
For technical assistance please contact:[email protected]