STORZ HYDRANT CONVERTERS Rev3 11-13-14Storz Hydrant Converter: SZMC Low Profile, Hydrant Nut Cap...
Transcript of STORZ HYDRANT CONVERTERS Rev3 11-13-14Storz Hydrant Converter: SZMC Low Profile, Hydrant Nut Cap...
STORZ HYDRANT CONVERTERSSTORZ HYDRANT CONVERTERS Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
STAINLESS STEEL EYELET
1 of 3 LOCKINGSET SCREWS
1/2” RECESSED REFLECTIVE
TAPE GROOVE
4.5 NH FEMALE THREAD
5" STORZ
Pentagon grooveretains the cable
or chain 22 5/8 3 5/8
3
1 3/4
5" STORZHIGH PRESSURE PENTAGON CAP
Storz Hydrant Converter: SZMC Low Profile, Hydrant Nut Cap Specifications
•Aluminum Alloy 6061-T6 extruded forging only. •(3) Stainless steel set screws for mounting. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The head has a 1/2” relief machine cut around the outside creating a recess for the insertion of highly visible yellow reflective tape.
FEATURES:
STORZ CAP AND CABLE CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer ring containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion. The outer ring has a 1/2” wide relief machine cut around the outside creating a recess for the insertion of the reflective tape. The cap has a high torque Hydrant Nut and can be removed with a Standard Hydrant Wrench. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap. •GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Hardcoat Anodized meeting Mil-A-8625-F, dark grey, Type III, Class I spec. Color is available with our Quantum® Hardcoat Anodizing which meets Mil spec 8625 Type III Class II•ALL COMPONENTS: Meet or Exceed NFPA Specifications •REFLECTIVE TAPE: Commercial grade reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness
5” Storz Metal Face X 4 1/2” NH Female, (3) Set Screws, Hi-visibility Reflective Tape, With Low Profile Hydrant Nut Storz Cap Hardcoat Anodized
®
NO CAST COMPONENTS
QUANTUM Hardcoat Colors Available
Groove Detail without the Cable
PART #: SZMC5045-3
Cable or Chain sits in the
Pentagon Groove
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
STAINLESS STEEL EYELET
1 of 3 LOCKINGSET SCREWS
1/2” RECESSED REFLECTIVE
TAPE GROOVE
4.5 NH FEMALE THREAD
5" STORZ
22 5/8 3 5/8
3
1 3/4
5" STORZHIGH PRESSURE PENTAGON CAP
Shown in MICRALOX BLUE®
Storz Hydrant Converter: SZMC Low Profile, Hydrant Nut Cap
Specifications
•Aluminum Alloy 6061-T6 extruded forging only. •(3) Stainless steel set screws for mounting. • The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The head has a 1/2” relief machine cut around the outside creating a recess for the insertion of highly visible yellow reflective tape.
FEATURES:
STORZ CAP AND CABLE CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer ring containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion. The outer ring has a 1/2” wide relief machine cut around the outside creating a recess for the insertion of the reflective tape. The cap has a high torque Hydrant Nut and can be removed with a Standard Hydrant Wrench. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap. •GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Micralox® Hardcoat Anodized blue, yellow, green, orange or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available. •ALL COMPONENTS: Meet or Exceed NFPA Specifications •REFLECTIVE TAPE: Commercial grade reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
5” Storz Metal Face X 4 1/2” NH Female, (3) Set Screws, Hi-visibility Reflective Tape, With Low Profile Hydrant Nut Storz Cap
PART #: SZMC5045-3
NO CAST COMPONENTS
Micralox® Hardcoat Anodized
Other MICRALOX Hardcoat Colors Available
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
STAINLESS STEEL EYELET
1 of 3 LOCKINGSET SCREWS
1/2” RECESSED REFLECTIVE
TAPE GROOVE
4.5 NH FEMALE THREAD
5" STORZ
22 5/8 3 5/8
3
1 3/4
5" STORZHIGH PRESSURE PENTAGON CAP
Storz Hydrant Converter: SZMC Low Profile, Hydrant Nut Cap
•Aluminum Alloy 6061-T6 extruded forging only. •(3) Stainless steel set screws for mounting. • The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The head has a 1/2” relief machine cut around the outside creating a recess for the insertion of highly visible yellow reflective tape.
FEATURES:
STORZ CAP AND CABLE CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer ring containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion. The outer ring has a 1/2” wide relief machine cut around the outside creating a recess for the insertion of the reflective tape. The cap has a high torque Hydrant Nut and can be removed with a Standard Hydrant Wrench. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap. •GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Quantum® Hardcoat Anodized blue, yellow, green, orange or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available. •ALL COMPONENTS: Meet or Exceed NFPA Specifications •REFLECTIVE TAPE: Commercial grade reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
5” Storz Metal Face X 4 1/2” NH Female, (3) Set Screws, Hi-visibility Reflective Tape, With Low Profile Hydrant Nut Storz Cap
PART #: SZMC5045-3
NO CAST COMPONENTS
Quantum® Hardcoat Anodized
Shown in QUANTUM GREEN®Other QUANTUM Hardcoat Colors Available
Specifications Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
Other Powder Coat Colors Available
NO CAST COMPONENTS
STAINLESS STEEL EYELET
1 of 3 LOCKINGSET SCREWS
1/2” RECESSED REFLECTIVE
TAPE GROOVE
4.5 NH FEMALE THREAD
5" STORZ
22 5/8 3 5/8
3
1 3/4
5" STORZHIGH PRESSURE PENTAGON CAP
Storz Hydrant Converter: SZMC Low Profile, Hydrant Nut Cap
Specifications
•Aluminum Alloy 6061-T6 extruded forging only. •(3) Stainless steel set screws for mounting. •The converter is a powder coated aluminum metal face seal and powder coated aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The head has a 1/2” relief machine cut around the outside creating a recess for the insertion of highly visible yellow reflective tape.
FEATURES:
STORZ CAP AND CABLE CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer ring containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion. The outer ring has a 1/2” wide relief machine cut around the outside creating a recess for the insertion of the reflective tape. The cap has a high torque Hydrant Nut and can be removed with a Standard Hydrant Wrench. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap. •GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum.Storz Assembly is fire engine red, evergreen, safety yellow, safety orange and dark blue Powder Coat. •REFLECTIVE TAPE: Commercial grade reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness. •ALL COMPONENTS: Meet or Exceed NFPA 1963
5” STORZ METAL FACE X 4 1/2” NH FEMALE, (3) SET SCREWS, HI-VISIBILITY REFLECTIVE TAPE, WITH LOW PROFILE HYDRANT NUT STORZ CAP
PART #: SZMC5045-3-Y
Powder Coat
Shown in POWDER COAT RED
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
4.5 NH FEMALE THREAD
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/82
2 1/21 7/8
STAINLESS STEEL EYELET
NO CAST COMPONENTS
Specifications
5” Storz X NH Thread Hydrant Converter With Locking Set Screws
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. Cap is equipped with cable. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap.•GASKETS: Commercial grade neoprene and molded SBR rubber •SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Hardcoat Anodized meeting Mil-A-8625-F, dark grey, Type III, Class I spec. Color is available with our Quantum® Hardcoat Anodizing which meets Mil spec 8625 Type III Class II. •ALL COMPONENTS: Meet or Exceed NFPA Specifications. •REFLECTIVE TAPE: Commercial grade yellow, reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Other MICRALOX Hardcoat Colors Available
Storz Hydrant Converter: SZMC Storz Standard StyleHardcoat Anodized - Natural Grey
Shown in Hardcoat GREY
NO CAST COMPONENTS
PART #: SZMC5045-7
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
NO CAST COMPONENTSNO CAST COMPONENTS
Available with Laser Engraving
®
PART #: SZMC5045-7
Shown in MICRALOX BLUE
4.5 NH FEMALE THREAD
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/82
2 1/21 7/8
STAINLESS STEEL EYELET
Specifications
5” Storz X NH Thread Hydrant Converter With Locking Set Screws
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. Cap is equipped with cable. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap.•GASKETS: Commercial grade neoprene and molded SBR rubber •SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Micralox® Hardcoat Anodized in blue, yellow, green, orange, or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available.•ALL COMPONENTS: Per NFPA1142 ed. 2007 •REFLECTIVE TAPE: Commercial grade yellow, reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Other MICRALOX Hardcoat Colors Available
Storz Hydrant Converter: SZMC Storz Standard Style
Micralox® Hardcoat
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
PART #: SZMC5045-7
Shown in QUANTUM BLUE
NO CAST COMPONENTSNO CAST COMPONENTS
Available with Laser Engraving
®Shown in QUANTUM GREEN
NO CAST COMPONENTS
4.5 NH FEMALE THREAD
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/82
2 1/21 7/8
STAINLESS STEEL EYELET
Specifications
5” Storz X NH Thread Hydrant Converter With Locking Set Screws
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. Cap is equipped with cable. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap.•GASKETS: Commercial grade neoprene and molded SBR rubber •SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Quantum® Hardcoat Anodized in blue, yellow, green, orange, or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available.•ALL COMPONENTS: Per NFPA1142 ed. 2007 •REFLECTIVE TAPE: Commercial grade yellow, reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Other QUANTUM Hardcoat Colors Available
Storz Hydrant Converter: SZMC Storz Standard StyleQuantum® Hardcoat
Shown in Quantum GREEN®
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
1. Remove the existing Hydrant CapInstallation Steps:
3. Install the Cap and Cable
1. Remove the Storz Cap with a simple quarter turn
Connection Steps:
Storz Hydrant Converter“Saves Time, Saves Lives”
2. Thread our quality forged Storz Connector, & tighten the set screws
Large Diameter Hose with Storz connections have quickly become a fire industry standard. The conversion of existing threaded fire hydrants to quick quarter turn Storz connections is becoming one of the first steps that communities are taking in a quest toward, quicker response time and interoperability.
Kochek, the United States leader in Storz connections is proud to offer you our line of Storz Hydrant Converters.
ONE INSTALLATION PROVIDES THOUSANDS OF QUICK, LIFE SAVING CONNECTIONS!
2. Attach the hose with a quick quarter turn
Now one wrench can openand close the Hydrant as wellas REMOVE the cap!
OPTIONAL: Hydrant Nut Cap (Shown)
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
Specifications
PART #: SZMC5045-2
4 Inch Style
5” STORZ X NH THREAD HYDRANT CONVERTER WITH LOCKING SET SCREWS
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP AND CABLE CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle.•GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All aluminum parts Hardcoat Anodized to Mil-A-8625-F, dark grey, Type III, Class I spec. •ALL COMPONENTS: Meet or Exceed NFPA Specifications.•REFLECTIVE TAPE: Commercial grade reflective urethane film, LS-300c Refl 1, class 1,FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
4.5 NH FEMALE THREAD
STAINLESS STEEL EYELET
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/8
2
2 1/2
1 7/8
Storz Hydrant Converter: SZMC Storz Standard Style
NO CAST COMPONENTS
Shown in HARDCOAT GREY
Shown with optional Hi-Visability Re�ective Tape
Hardcoat
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
4.5 NH FEMALE THREAD
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/82
2 1/21 7/8
STAINLESS STEEL EYELET
Shown in QUANTUM BLUE
NO CAST COMPONENTSNO CAST COMPONENTS
Available with Laser Engraving
®
PART #: SZMC5045-2
Shown in MICRALOX BLUE
Specifications
5” Storz X NH Thread Hydrant Converter With Locking Set Screws
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. Cap is equipped with cable. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap.•GASKETS: Commercial grade neoprene and molded SBR rubber •SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Micralox® Hardcoat Anodized in blue, yellow, green, orange, or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available.•ALL COMPONENTS: Per NFPA1142 ed. 2007 •REFLECTIVE TAPE: Commercial grade yellow, reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Other MICRALOX Hardcoat Colors Available
Storz Hydrant Converter: SZMC Storz Standard StyleMicralox® Hardcoat
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
4.5 NH FEMALE THREAD
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/82
2 1/21 7/8
STAINLESS STEEL EYELET
PART #: SZMC5045-2
Shown in QUANTUM BLUE
NO CAST COMPONENTSNO CAST COMPONENTS
Available with Laser Engraving
®Shown in QUANTUM GREEN
Specifications
5” Storz X NH Thread Hydrant Converter With Locking Set Screws
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. Cap is equipped with cable. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap.•GASKETS: Commercial grade neoprene and molded SBR rubber •SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Storz Assembly is Quantum® Hardcoat Anodized in blue, yellow, green, orange, or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available.•ALL COMPONENTS: Per NFPA1142 ed. 2007 •REFLECTIVE TAPE: Commercial grade yellow, reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Other QUANTUM Hardcoat Colors Available
Storz Hydrant Converter: SZMC Storz Standard StyleQuantum® Hardcoat
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
Specifications
5” STORZ X NH THREAD HYDRANT CONVERTER WITH LOCKING SET SCREWS
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. Cap is equipped with a chain. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All are aluminum parts. Storz Hydrant Converter and Cap Outter are Hardcoat Anodized to Mil-A-8625-F, Type lll, Class l—dark grey. Cap Inner is Micralox® Hardcoat in blue, yellow, green, orange or red meeting Mil-A-8625-F, Type III, Class II spec. Other colors are available. •ALL COMPONENTS: Per NFPA1142 ed. 2007 OPTIONAL •REFLECTIVE TAPE: Commercial grade yellow, reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Shown with Cable Option
Shown with Natural Chain
Storz Hydrant Converter
Cap Outter
Storz Hydrant Converter: SZMC Storz Standard StyleHardcoat Combination
4.5 NH FEMALE THREAD
1 of 2 SET SCREWS
5" STORZ
5" STORZ
2 5/82
2 1/21 7/8
PART #: SZMC5045-2
Powdercoat Blue
NO CAST COMPONENTS
Other Quantum Coat Colors AvailableHardcoat
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
Hardcoat Anodized
PUTNAMDO NOT accept as scrap
PUTNAMDO NOT accept as scrap
OPTIONAL: Stainless Steel Lock
Forged6061-T6 Aluminum
1/2 “ Reflective Tape on Blind Cap and Hydrant Adapter
K08 Hydrant Spanner Wrench
OPTIONAL:
OPTIONAL: Laser Engraving on the cap front
12 OZ. ST2 Dry Lubricantfor Storz / Threads
Storz Hydrant Adapter SZMC Style
5" Storz H.C.B. Installation Tool
Storz Lug
Engages w/the Storz Lug
•Aluminum Alloy 6061-T6 extruded forging only. •(2) Stainless steel set screws for mounting. •Set screws must be mounted 180 degrees apart. •The converter is hard anodized aluminum metal face seal and hard anodized aluminum Storz ramp and lugs. •The NH thread female adapter contains a flat rubber gasket which seals against the male hydrant nozzle.•The high torque, anti theft cap requires a Storz wrench for removal.
FEATURES:
STORZ CAP AND CABLE CONSTRUCTION: •ASSEMBLY: Both the center cap and the outer assembly containing the Storz ramps and lugs is Aluminum alloy 6061-T6 forged extrusion only. •CABLE: 3/32”, (7 x 7) Stainless steel aircraft cable w/ stainless steel eyelet end is supplied with the cap. Once installed, the Storz Hydrant Converter with cap extends less than 3” from the hydrant nozzle. •GASKETS: Commercial grade neoprene and molded SBR rubber•SCREWS: 304 stainless steel socket head screws.•FINISH: All parts are aluminum. Hardcoat Anodized to Mil-A-8625-F, dark grey, Type lll, Class l spec. •ALL COMPONENTS: Meet or Exceed NFPA Specifications. •REFLECTIVE TAPE: Commercial grade reflective urethane film, LS-300c Refl 1, class 1, FP85 type 2, AFTM d4956-94 type 1, 7 year durability, 5.5 mil thickness.
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260
4” and 5” Storz Security LockPATENT PENDING
The STORZ SECURITY LOCK is a stainless steel device that can be installed on “any 4” or 5” storz fitting” to safely secure and lock Caps, Valves, or Hoses. When installed on Fire Sprinkler Storz Connections we recommend using a “Break Away” lock.
APPLICATIONS
HYDRANTS
BUILDING CONNECTIONS
DRY HYDRANT CONNECTIONS OTHER STORZ CONNECTIONS
Protect Fire Hydrant WaterwaysDeter Theft of CapsPrevent Entry of Obstructions to Fire Sprinkler Systems ConnectionsSecure Temporary or Emergency Hose Lines and ValvesUse to Tag/Lock Out “out of service hydrants”
SSMSL4 / SSMSL5PART #’S
Stainless SteelPatent Pending
Fits over the Storz Lug
1 Set Per Package
InstallationInstructions
Rev3_11-13-14
T: 800-420-4673F: 800-772-0255
k o c h e k . c o m
75 Highland Dr. Putnam, CT 06260