Stormtech Q&A
-
Upload
fruit-distribution -
Category
Documents
-
view
223 -
download
0
description
Transcript of Stormtech Q&A
20
11 T
RAI
NIN
G M
ANUA
L T
RAI
NIN
G M
ANUA
L T
RAI
NIN
G M
ANUA
L T
RAI
NIN
G M
ANUA
L T
RAI
NIN
G M
ANUA
L T
RAI
NIN
G M
ANUA
L
Manual Spring2010_V3.indd 1Manual Spring2010_V3.indd 1Manual Spring2010_V3.indd 1Manual Spring2010_V3.indd 1Manual Spring2010_V3.indd 1Manual Spring2010_V3.indd 1Manual Spring2010_V3.indd 1 8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM8/23/10 12:13:02 PM
STORMTECH Performance Apparel, based in Burnaby, British Columbia, is a private Canadian corporation that was founded in 1977. We began as a small promotional apparel company, and have since grown into a globally recognized Performance Apparel brand that is available at both the retail and corporate levels in North America, Asia, Europe, Latin America, and the South Pacific.
Manual Spring2010_V3.indd 2Manual Spring2010_V3.indd 2Manual Spring2010_V3.indd 2Manual Spring2010_V3.indd 2Manual Spring2010_V3.indd 2Manual Spring2010_V3.indd 2 8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM8/23/10 12:13:10 PM
STORMTECH strives to set the standard for innovative, high quality performance apparel. We are best known for our top technical collections, such as STORMTECH H2Xtreme®, which provides waterproof/breathable protection in the most severe and unpredictable of climates. Other technical lines, such as STORMTECH Dry-Tech®, provide lightweight, moisture wicking garments that keep athletes dry and comfortable.
Manual Spring2010_V3.indd 3Manual Spring2010_V3.indd 3Manual Spring2010_V3.indd 3Manual Spring2010_V3.indd 3Manual Spring2010_V3.indd 3Manual Spring2010_V3.indd 3 8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM8/23/10 3:51:49 PM
4 | STORMTECH PERFORMANCE APPAREL
Decorating technical apparel
OutshellOutshell
EmbroiderySealing SystemSealing SystemSealing SystemSealing SystemSealing SystemAdhesive melts through Adhesive melts through Adhesive melts through Adhesive melts through Adhesive melts through the embroidered the embroidered the embroidered the embroidered the embroidered the embroidered the embroidered the embroidered H2XTREME™ laminate to completely reseal the embroidered area.
LiningLining
Moisture vapour escape
H2XtrEME™Membrane
A number of products are available that can be used to seal embroidered areas:1. Embroidery backings, like Soft and Dry Wet Patches, or embroidery tapes are very easy to
use. Simply place the patch/tape over the back of the embroidery, and apply pressure and heat at the same time. the heat will melt the sealant, which will then coat the threads and seep between the threads and into the pierced needle holes.
2. Silicone products available from outdoor stores will also work. these tend to come as either aerosols, in tubes, or in small bottles with an applicator brush. By applying the silicone to the back of the embroidery not only do the threads get coated, but the spaces in between get filled as well. Please Note: any shop that provides heat-seal transfer services should avoid using aerosol silicone products as it is also a lubricant and air-borne silicone can interfere with heat-transfers.
3. Wax products, such as Nikwax are also available from outdoor stores. Nikwax bonds to the fibers of the embroidery, but does not fill in the spaces between the threads. thus some of breathability is maintained.
sealing embroidery
WAterProof/breAthAblefAbric techNology
Heat transfer & silk screening are natural cHoices for decorating tecHnical apparel. However, every storMtecH garMent also Has a Hidden eMbroidery access panel to allow for Hiding tHe eMbroidery backing & resealing tHe stitcHing
Manual Spring2010_V3.indd 4Manual Spring2010_V3.indd 4Manual Spring2010_V3.indd 4Manual Spring2010_V3.indd 4Manual Spring2010_V3.indd 4Manual Spring2010_V3.indd 4
SAT0036Dry-Tech L/S LAyering Tee
BMF-1ecLipSe BonDeD FLeece SheLL XBr-1
LASer-Tech h2XTreMe™ SheLL
tHe key to staying warM wHile active in cold weatHer is best acHieved by wearing a series of layers designed to trap warM air around your body wHile protecting you froM tHe eleMents.
The FirST LAyer wickS The MoiSTure AwAy FroM your BoDy. coMpreSSion BASe LAyerS ALSo heLp To iMprove MuScLe perForMAnce AnD recovery TiMe in BoTh hoT AnD coLD conDiTionS.
The SeconD LeveL oF LAyering proviDeS TherMAL inSuLATion - BuT ALSo wicking properTieS So ThAT Any MoiSTure wickeD To The Top oF The BASe LAyer iS FurTher TrAnSporTeD AwAy FroM The BoDy.
The ouTSheLL LAyer proTecTS The BoDy FroM The eLeMenTS. BoTh STorMTech h2X® AnD h2XTreMe® FABricS proviDe eXceLLenT Top LAyer TechnoLogy.
base1.
2. 3.
stormtech layering technology
LAyer
midLAyer out
SheLL
Manual Spring2010_V3.indd 5Manual Spring2010_V3.indd 5Manual Spring2010_V3.indd 5Manual Spring2010_V3.indd 5Manual Spring2010_V3.indd 5Manual Spring2010_V3.indd 5 8/23/10 12:14:01 PM8/23/10 12:14:01 PM8/23/10 12:14:01 PM
All H2X & H2Xtreme garments have waterproof and breathability ratings. 15,000 mm waterproof means that if that fabric were bonded underneath a tube that was 15 meters tall, the tube could be filled with water and it would take 24 hours before any would begin to soak through the fabric. Alternatively, the breathability rating measures how much water vapour could move through the fabric over 24 hours if the water was boiled and then collected as it condensated.
H2X®
A permenant coating that is applied to the underside of the garment, providing a minimum of 1000 mm of waterproofness and breathability.
H2Xtreme®A polyurethane based membrane that is bonded to the underside of the outshell, providing a minimum of 5000 mm of waterproofness and also 3000 g/m2/24hr breathability.
DuPont™
fabric protector
REPEL
Teflon is a water repellent application applied to the surface of a garment that causes water to bead up and roll off the surface of the garment. Also helps prevent against stains from spills.
H2X® and H2Xtreme® ratings refer only to the outshell fabrication of the garment. If the seams of a garment are not sealed then over time moisture can seap in, especially as the garment is used more.
The STORMTECH Durable Water Resistant (D/W/R) barrier is a light version of our H2X coating. It provides permanent protection of up to 600 mm and offers excellent breathability.
technologtechnologY
STORMTECH offers a wide range of STORMTECH offers a wide range of technologies to suit the diversity of its technologies to suit the diversity of its clients needs. These requirements can range clients needs. These requirements can range from providing enough protection for a from providing enough protection for a sudden rain shower, to absolute waterproof sudden rain shower, to absolute waterproof protection & high levels of breathability for protection & high levels of breathability for those who work or play hard in the most those who work or play hard in the most extreme weather conditions.extreme weather conditions.
b e s tb e s t
b e t t e r
g o o d
6 | STORMTECH PERFORMANCE APPAREL
Manual Spring2010_V3.indd 6Manual Spring2010_V3.indd 6Manual Spring2010_V3.indd 6Manual Spring2010_V3.indd 6Manual Spring2010_V3.indd 6Manual Spring2010_V3.indd 6 8/23/10 12:14:18 PM8/23/10 12:14:18 PM8/23/10 12:14:18 PM
3-LAYER GARMENTSThe most technical (and expensive) collection of shells that we offer is the 3 Layer Bonded Collection. These garments have had the three layers mentioned above bonded together under high heat and pressure to form a single piece of technical fabric. This achieves a lighter, less bulky garment. Three layer bonded garments can include both hardshells and softshells.
2-LAYER GARMENTSGarments that are 2 Layer do not have a liner. They simply have the outshell bonded with a waterproof/breathable membrane underneith. These very lightweight shells are ideal for people who want to constantly wear different base layers with their jacket, or pack it up into a tiny bundle to conserve space.
2 ½ LAYER GARMENTSShells that are 2.5 Layer are simply a 2 Layer shell with a liner stitched in. Because the liner is not bonded in (as with 3 Layer jackets) the garment is more bulky and slightly heavier. However, this design also allows for a cushion of air to circulate between one’s body and the jacket, which provides some added warmth.
technical ShellShellShellThis category of jackets is designed to look great while protecting you from the harshest of elements. They can be broken down into two catagories based on their outshell fabric;
Hardshell 1. (Durable, anti-abrasive fabrics)Softshells 2. (Softer fabrics that allow for greater maneuverability.
COUNTING THE LAYERSBesides being hard or softshell, this catagory can also be seperated based on the layers that make up each jacket;
The outshell that everyone sees1.The waterproof/breathable membrane inside2.The inner liner against your skin3.
outshell
waterproof waterproof waterproof waterproof membranemembrane
inner linerinner linerinner linerinner liner
waterproof waterproof waterproof membranemembrane
design also allows for a cushion of air to circulate between one’s body and the jacket, which provides some added warmth.
STORMTECH PERFORMANCE APPAREL | 7
Manual Spring2010_V3.indd 7Manual Spring2010_V3.indd 7Manual Spring2010_V3.indd 7Manual Spring2010_V3.indd 7Manual Spring2010_V3.indd 7Manual Spring2010_V3.indd 7 8/23/10 12:14:26 PM8/23/10 12:14:26 PM8/23/10 12:14:26 PM8/23/10 12:14:26 PM
8 | STORMTECH PERFORMANCE APPAREL
INSULATED SHELLS
Style Seam Sealed
Fabric WP/BR
Fill
2.5 LAYER HARDSHELLS
EP-1 • 10/10 Poly
DB-1 • 5/3 Down
VPR-1 • 5/3 Poly
LJX-1 • 3/3 Down
SPX-2 • 2/1 Poly
HJX-1 • 2/1 Poly
DF-2 D/W/R Down
LIGHT-WEIGHT SHELLS
Style Seam Sealed
Fabric WP/BR
WINDSHIRTS WR-1 D/W/R
FULL-ZIP JACKETS
SR-1 D/W/R
ESX-1 D/W/R
XMR-1 D/W/R
XR-1 D/W/R
PX-1 D/W/R
VESTS
VR-1 D/W/R
EVX-1 D/W/R
PONCHO PCX-1 D/W/R
technical JacKetS - categorY oVerVieWthese charts displays a comparison of all the technical jacket produced by storMtecH
SYSTEM JACKETS
Style Seam Sealed
Fabric WP/BR
3 LAYER BONDED
SOFTSHELLB-1 8/5
2.5 LAYER HARD SHELL
VPX-4 • 5/3
XR-4 • 2/1
XLT-2 D/W/R
TR-1 D/W/R
TPX-2 D/W/R
THERMAL SHELLS
Style Seam Sealed
Fabric WP/BR
2.5 LAYER HARDSHELLS
XF-1 D/W/R
XRT-2 D/W/R
CMX-1 D/W/R
Note: CXJ-1, CXJ-2, HSJ-1 & XJF-1 all utilize the same bonded softshell outshell.
HS-1, B-1, S-1, & HSP-1 all utilize the same bonded softshell outshell.
BONDED SHELLS
Style Seam Sealed
Fabric WP/BR
3 LAYER BONDED SHELL
XBR-1 • 15/15
E-1 • 10/10
XJ-2 • 8/3
XJ-1 8/5
S-1 8/5
HS-1 8/5
HST-1 8/3
HSP-1 8/3
BXT-2 8/3
BX-2 7/3
BXV-2 7/3
CXJ-1 Teflon
CXJ-2 Teflon
DX-1 Teflon
HSJ-1 Teflon
XJF-1 Teflon
2.5 LAYER HARDSHELL
T-2 • 10/10
T-1 • 10/5
XG-1 • 8/5
XGP-1 • 8/5
XWS-1 • 2/1
2 LAYER HARDSHELL
SSR-1 • 8/3
SSR-2 • 5/3
Manual Spring2010_V3.indd 8 8/23/10 12:14:28 PM
Soft ShellS
newCoLouR
newCoLouR
xbR-1 Laser-Tech h2XTreMe® Shell• 3 Layer Bonded Soft Shell• 15,000/15,000• Seamless
xJ-2 h2XTreMe® Waterproof Bonded Shell • 3 Layer Bonded Soft Shell• 8,000/3,000 • Seam Sealed
hst-1 Epsilon H2XTREME®Textured Jacket• 8,000/3,000
hs-1 Epsilon H2XTREME® Jacket• 8,000/5,000
xJ-1 Aeronaut Soft Tech Bonded Shell• 8,000/5,000
newCoLouR
newCoLouR
hsJ-1 Crew Bonded Shell• Water Repellent
CxJ-1 Crew Bonded Jacket• Water Repellent
newstyLe
b e s t
b e t t e r
g o o d
DuPont™
fabric protector
REPEL
DuPont™
fabric protector
REPEL
SEALEDS E A M S
SEALEDS E A M S
Manual Spring2010_V3.indd 9Manual Spring2010_V3.indd 9Manual Spring2010_V3.indd 9Manual Spring2010_V3.indd 9Manual Spring2010_V3.indd 9Manual Spring2010_V3.indd 9 8/23/10 12:15:12 PM8/23/10 12:15:12 PM8/23/10 12:15:12 PM
1
2
3
4
5
6
Soft ShellShellShell
page 8 of the fall 2010 international catalogue
SXBr-1 laser-tech h2Xtreme® shell
flagship technical technical t shell ••3 layer bonded softshell••15,000 mm waterproof fabric ••15,000 g/m•• 2/24 hr breathablewelded welded w seam construction••
Key Features:
WaterWaterW ProoF/BreathaBle 3-layer shell: Maneuverable/flexible outshell bonded with a 15,000 waterproof/breathable H2Xtreme® membrane and an inside lining advantage:
Maximum protection against the elements is achieved while maintaining an extremely lightweight & •comfortable shell.keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and •regulate your own internal temperature.
seWless constrUction: all of the seams on the Xbr-1 are ultra-sonically welded together and then reinforced with heat sealing tape.advantage:
sewless construction combined with the H2Xtreme• ® membrane provides absolute waterproof protection while you’re at your most active. welded seams are also flatter/more comfortable against the skin. welded seams are also flatter/more comfortable against the skin. w they are also more flexible and lighter •weight than stiched seams.
WaterWaterW ProoF ZiPPers: not only do these tightly seal the pockets and main body of the jacket against the wind and rain, but the zippers are also themselves welded to the jacket so as to avoid any holes that would otherwise be caused by stitching.advantage:
keeps you warm and dry against the elements•protects any documents or electronics that you’ve got stored in your pockets.•
articUlateD hooD With Brim: drawcords allow the hood to be pulled tight, and the reinforced brim provides extra sturdiness as it extends over your face.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses heat from•the brim extends out to keep the sun out of your eyes and the rain off your face.•
aUDio-access Port:ort:ort internal port allows ear-bud access from the inside of your jacket to the waterproof chest pocket.advantage:
this ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and •catching on things.
aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacketadvantage:
keeps the wind, rain, and snow out of your jacket so that you can stay warm & dry.•
page 8 of the fall 2010
SEALEDS E A M S
StitchlessConstruction
laser-Cut adjustableCuff tabstabst
built-in adjustablearticulated hood
Side and Chest Zippered pocketswith Welded frame
Performance features: Ultrasonic Welded Seam ensure Maximum Waterproofing Seam Sealed Set-in Sleeves with laser-Cut adjustable Cuff tabs built-in adjustable articulated hood Waterproof Chest pocket with audio port Side and Chest Zippered pockets with Welded frame reversed tape Waterproof Center front Zipper
with full-length Inner Storm placket
Shell: 100% polyester, 205g/m (CDN)/7.2oz. (USa) ; 3-ply Waterproof/breathable Nylonlining: Inner laminated tricot Surface
SizeS: (M’S) S-3xl ; (W’S) xS-2xlColourS: red, black, Navy, electric blue, eggplant, Wasabi.
: limited edition Colours.
xbr-1W: black
xbr-1:xbr-1: r reded
LasEr-tEchh2xtreme® shell
xbr-1 | xbr-1w
eggplant
Navy
red
blackblack
electric blueelectric blue
WasabiWasabi
newcolours
L/E
L/E
L/E
Stor
MteC
h h
2xtreM
e perfo
rM
aNC
e softsh
ell, tech
nic
al sh
ells & sk
i Pan
ts
8
10 | STORMTECH PERFORMANCE APPAREL
b e s t
Manual Spring2010_V3.indd 10Manual Spring2010_V3.indd 10Manual Spring2010_V3.indd 10Manual Spring2010_V3.indd 10Manual Spring2010_V3.indd 10Manual Spring2010_V3.indd 10
1
2
3
4
5
Soft ShellShellShell
page 22 of the fall 2010 international catalogue
hs-1 ePsilon h2Xtreme® shell3 layer bonded softshell•8,000 mm waterproof fabric•5,000 g/m• 2/24 hr breathable
page 22 of the fall 2010
Key Features:
WaterWaterW ProoF/BreathaBle 3-layer shell: Maneuverable/flexible outshell bonded with a 8,000/5,000 H2Xtreme membrane and matrix fleece lining.advantage:
excellent weather protection is achieved while maintaining an extremely lightweight and •comfortable shell.keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to •escape and regulate your own internal temperature.
WaterProoF PocKet: the bicep pocket has been welded onto the sleeve and the zipper is waterproof.advantage:
welding avoids stitching that would create holes in the fabric and allow water into the pocket.welding avoids stitching that would create holes in the fabric and allow water into the pocket.w•waterproof zipper ensures that the pocket is completely impenetrable to the elements.•
aUDio-access Port:ort:ort this internal port allows ear-bud access from the inside of your jacket to the chest pocket.advantage:
prevents earbud cords from hanging outside your jacket and catching on anything. •
aDJUstaBle, articUlateD hooD: drawcords on the front and back allow the hood to be pulled tight.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses •heat from.
aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket.advantage:
keeps the wind and rain / snow out of your jacket so that you can stay warm and dry.•
STORMTECH PERFORMANCE APPAREL | 11
b e t t e rb e t t e rb e t t e rb e t t e r
Manual Spring2010_V3.indd 11Manual Spring2010_V3.indd 11Manual Spring2010_V3.indd 11Manual Spring2010_V3.indd 11Manual Spring2010_V3.indd 11Manual Spring2010_V3.indd 11
1
2
3
4
Soft ShellShellShellShsJ-1 creW BonDeD shell
3 layer bonded softshell•wind / water repellent•
Key Features:
WinD/Water rePllent 3-layer shell: Maneuverable/flexible outshell reinforced with teflon technology teflon technology tadvantage:
basic protection from the elements while maintaining an extremely lightweight and •comfortable shell.spills on the surface of the jacket like coffee or other liquids beed up and roll off before •they can stain the jacket
aUDio-access Port:ort:ort this internal port allows ear-bud access from the inside of your jacket to the chest pocket.advantage:
prevents earbud cords from hanging outside your jacket and catching on anything. •
aDJUstaBle, articUlateD hooD: drawcords on the front and back allow the hood to be pulled tightadvantage:
keeps the wind and rain off your head, which is the number one place where your body •loses heat from
aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket.advantage:
keeps the wind and rain / snow out of your jacket so that you can stay warm and dry.•
page 32 of the fall 2010 international cataloguepage 32 of the fall 2010
12 | STORMTECH PERFORMANCE APPAREL
g o o d
Manual Spring2010_V3.indd 12Manual Spring2010_V3.indd 12Manual Spring2010_V3.indd 12Manual Spring2010_V3.indd 12Manual Spring2010_V3.indd 12 8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM8/23/10 12:15:48 PM
harDShellS
e-1m Edge H2XTREME® Shell• 10,000/10,000 • Seam Sealed• 3-Layer Bonded Hardshell
t-2m Freestyle H2XTREME® Shell• 10,000/10,000 • Seam Sealed• 2.5-Layer Bonded Hardshell
t-1 TriTon h2XTreMe® Shell• 10,000/5,000 • Seam Sealed• 2.5-Layer Bonded Hardshell
xRt-2 Nordic Thermal Shell• D/W/R • Fleece Lined
Cmx-1 Fleet Micro Reversible Jacket • D/W/R • Fleece Lined
xf-1 Apex Fleece Lined Jacket• D/W/R • Fleece Lined
b e s t
b e t t e r
g o o d
SEALEDS E A M S
SEALEDS E A M S
SEALEDS E A M S
D / W / R D / W / R D / W / R
Manual Spring2010_V3.indd 13Manual Spring2010_V3.indd 13Manual Spring2010_V3.indd 13Manual Spring2010_V3.indd 13Manual Spring2010_V3.indd 13Manual Spring2010_V3.indd 13 8/23/10 12:16:23 PM8/23/10 12:16:23 PM8/23/10 12:16:23 PM
harD ShellShellShell
page 16 of the fall 2010 international catalogue
harhare-1 eDge h2Xtreme® shell•• 33 Layer bonded hardshell•• 10,000 mm waterproof fabric•• 10,000 g/m2/24 hr breathable•• Seam sealed
page 16 of the fall 2010
PerformanCe featureS: extreme performance, fully Seam-Sealed, Waterproof / breathable 3-ply Shell
laser-Cut and bonded Chest & bicep pocket laminated front placket & hood brim Stowable, adjustable, articulated hood extra long pit-Zips (15”) for Superior breathability
Shell: 100% Nylon, 175g/m (CDN)/6.2oz. (USa); 3-ply Waterproof/breathable Nylonlining: Inner laminated tricot Surface
SizeS: (m’S) S-3xl ; (W’S) xS-2xlColourS: black/Greystone,Navy/Greystone (M’s only),red/Greystone (M’s only).
extra long pit-Zipsfor breathability
Stowable, adjustable,articulated hood
Waterproof Chest &bicep pocket
laser-Cut adjustable Cuff tabs
adjustable Drawcords
e-1W: black/Greystone
e-1M: red/Greystone
black/Greystone Navy/Greystone(M’s only)
red/Greystone(M’s only)
EdgEh2xtreme® shell
E-1m | E-1w
16
Sto
rM
teCh
h2xtr
eMe per
for
Ma
NC
e so
ftsh
ell, tech
nic
al s
hells
& s
ki Pa
nts
articulated hood
The Edge Shell is a 3 Layer Bonded Hardshell - so The Edge Shell is a 3 Layer Bonded Hardshell - so it is more durable and anti-abrasive than the XBR-it is more durable and anti-abrasive than the XBR-1 and XJ-2. It is also between the two in terms of its waterproof/breathability rating, and is completely seam sealed.
1
2
3
4
5
6
7
Key Features:
WaterWaterW ProoF/BreathaBle 3-layer shell: durable/anti-abrasive outshell bonded with a 10,000/10,000 H2Xtreme® membrane and an inside liningadvantage:
Maximum protection against the elements & surroundings is achieved while maintaining an extremely •lightweight & comfortable shellkeeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and •regulate your own internal temperature.
seam sealeD: the seams are all taped on the inside of the jacket.advantage:
sealed seams combined with the H2Xtreme• ® membrane ensures waterproof protectionkeeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and •regulate your own internal temperature.
WaterWaterW ProoF PocKets: the chest & bicep pockets have been welded onto the jacket & the zippers are waterproofadvantage:
welded seams avoid stitching that would create holes in the fabric and let water inwelded seams avoid stitching that would create holes in the fabric and let water inw•waterproof zippers ensure that the pocket is completely impenetrable to the elements•
aUDio-access Port: ort: ort internal port allows ear-bud access from the inside of your jacket to the waterproof chest pocket.advantage:
this ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and •catching on things.
rollaWrollaWrolla ayWayW hooD: the waterproof, fully lined and adjustable hood can be rolled inside the collar of the jacket.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses heat from•this makes the jacket relevant for a broader range of seasons.•
Pit ZiPs: under-arm zippers that provide access for air circulation.advantage:
allows you to instantly cool off by letting out hot air/letting in cool air•
storm FlaP: although the main body zipper is not waterproof, it is covered by this flapadvantage:
keeps the wind and moisture from penetrating the zipper•
14 | STORMTECH PERFORMANCE APPAREL
b e s t
Manual Spring2010_V3.indd 14Manual Spring2010_V3.indd 14Manual Spring2010_V3.indd 14Manual Spring2010_V3.indd 14Manual Spring2010_V3.indd 14Manual Spring2010_V3.indd 14
BonDeD harD ShellShellShellt-2 Freestyle h2Xtreme® shell
• 2.5 Layer hardshell• 8,000 mm waterproof fabric• 3,000 mm breathable• Seam Sealed
page 21 of the fall 2010 international cataloguepage 21 of the fall 2010
PERFORMANCE FEATURES:Extreme Performance, Fully Seam Sealed,Waterproof/Breathable OutshellLaser-Cut and Bonded Arm Pocket with WaterproofZipperFront Chest Patch Pockets with Bellows and SideZip EntryOn-Seam Zip Pockets and Laminated Front PlacketLong Pit-Zips For Superior BreathabilityUpper Body Microfleece LinedInside Pockets and Adjustable Drawcord at HemAdjustable Hood
SHELL: 100% Nylon, 125g/m (CDN)/4.4oz. (USA)100% polyester (Seal Brown Texture)LINING: Fully Lined with Microfleece and Taffeta,165g/m (CDN)/5.8oz. (USA)
SIZES: (M’S) S-3XL ; (W’S) XS-2XLCOLOURS: Black, Navy, Red, Seal Brown (Textured).
T-2W: Black
T-2M:T-2M:T-2M:Seal Brown (Texture)
FREESTYLEh2xtreme® shell
T-2M | T-2W
SEALEDS E A M S
Adjustable Drawcords
Hidden EmbroideryAccessAccessAccess PanelPanelPanel
WaterproofArm Pocket
Detachable,Detachable,Adjustable,Adjustable,Adjustable,Adjustable,Adjustable,Adjustable, Hood
Extra Long Pit-Zips forBreathability
Laser-CutLaser-CutLaser-Cut AdjustableCuff Tabs
Navy
Red
Seal Brown (Texture)(Texture)
Black
STO
RM
TECH
H2
XTR
EME
PER
FOR
MA
NC
ES
OFTS
HELL, TEC
HN
ICA
L SH
ELLS &
SK
I PA
NTS
21
WATERPROOF/BREATHABLE 2.5-LAYER SHELL: Durable/Anti-Abrasive outshell bonded with a 10,000/10,000 H2Xtreme® membrane and a fleece liner stitched inside Advantage:
Maximum protection against the elements & surroundings is achieved while maintaining •an extremely lightweight & comfortable shellKeeps you comfortable & dry by keeping the moisture out and allowing your body •vapour to escape and regulate your own internal temperature.
SEAM SEALED: The seams are all taped on the inside of the jacket. Advantage:
Sealed seams combined with the H2Xtreme membrane ensures excellent waterproof •protection
WATERPROOF POCKETS: The bicep pocket is part of the waterproof outshell & has a waterproof zipper on it Advantage:
Protects any documents / electronics that you’ve got stored in your pockets•
AUDIO-ACCESS PORT: Internal port allows ear-bud access from the inside of your jacket to the waterproof chest pocket. Advantage:
This ensures that your ipod stays dry and prevents earbud cords from hanging outside •of your jacket and catching on things.
ROLLAWAY HOOD: The waterproof, fully lined and adjustable hood can be rolled inside the collar of the jacket.
Advantage:Keeps the wind and rain off your head, which is the number one place where your body •loses heat fromThis makes the jacket relevant for a broader range of seasons.•
PIT ZIPS: Under-arm zippers that provide access for air circulationAdvantage:
Allows you to instantly cool off by letting out hot air/letting in cool air•
STORM FLAP: Although the main body zipper is not waterproof it is covered by this flapAdvantage:
Keeps the wind and moisture from penetrating the zipper•
Key Features:
6
5
4
3
2
1
STORMTECH PERFORMANCE APPAREL | 15
b e t t e r
Manual Spring2010_V3.indd 15Manual Spring2010_V3.indd 15Manual Spring2010_V3.indd 15Manual Spring2010_V3.indd 15Manual Spring2010_V3.indd 15Manual Spring2010_V3.indd 15
1
2
3
Key Features:
WaterProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell coated with an extremely breathable, 600 mm water resistant d/w/w/ /w/w r application. advantage:
the d/w/w/ /w/w r coating will never wash or wear out – and shields you from the wind and rain.•keeps you comfortable and dry by keeping the moisture out and allowing your body •vapour to escape and regulate your own internal temperature.
anti-Pill Polar Fleece lining:advantage:
keeps the wind and rain off your head, which is the number one place where your body •loses heat from.Makes the jacket relevant for a broader range of seasons. •
aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket.advantage:
keeps the wind and rain out of your jacket so that you can stay warm and dry.•
page 59 of the fall 2010 international cataloguepage 59 of the fall 2010
harharharD ShellShellShellXrt-2 norDic thermal shell• 2.52.5 Layer hardshell• D/W/RD/W/R Durable Water Resistant• PolarPolar Fleece Lining
16 | STORMTECH PERFORMANCE APPAREL
g o o d
Manual Spring2010_V3.indd 16Manual Spring2010_V3.indd 16Manual Spring2010_V3.indd 16Manual Spring2010_V3.indd 16Manual Spring2010_V3.indd 16 8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM8/23/10 12:16:45 PM
inSulateD outerWear
df-2 Peak Down Jacket• D/W/R • Down/Feather
newstyLe
db-1 Rogue Boarding Jacket• 5,000/3,000 • Seam Sealed• Down/Feather
LJx-1 Icebreaker Down Long Jacket• 3,000/3,000 • Seam Sealed• Down/Feather
newstyLe
newstyLe
vpR-1 Orbit Thermal Bomber Shell• 5,000/3,000 • Seam Sealed• Polyfill
b e s tb e s t
g o o dg o o d
Down: Down is more fluffy than regular feathers, which allows it to trap air and provide excellent insulation; in fact, down is the warmest, lightest insulation (and most expensive) available. It also wicks moisture and is highly compressible and lightweight.
Feathers: Feathers are not as warm as down - but when mixed with down they help prevent clumping. Mixing feathers in with down also reduces the cost of a garment.
Polyfill: This is a synthetic insulation that provides warmth at a much lower price than down. It is more bulky and heavy than down, but it has some benefits over the natural alternative.
Unlike down which wicks moisture but is slow to dry, polyfill is water resistant and dries very quickly, so even when it does get wet it can still provide insulation. Polyfill also provides an excellent alternative to those with allergies to down or feathers.
b e t t e r
SEALEDS E A M S
SEALEDS E A M S
SEALEDS E A M S
D / W / R
WATERPROOF
BREATHABLE
Manual Spring2010_V3.indd 17Manual Spring2010_V3.indd 17Manual Spring2010_V3.indd 17Manual Spring2010_V3.indd 17Manual Spring2010_V3.indd 17Manual Spring2010_V3.indd 17Manual Spring2010_V3.indd 17 8/23/10 12:17:05 PM8/23/10 12:17:05 PM8/23/10 12:17:05 PM
inSulateD outerWear
page 40 of the fall 2010 international catalogue
DB-1 rogUe h2Xtreme® DoWn JacKet• 2.5 Layer hardshell • Seam sealed• 5,000 mm waterproof fabric • 70/30 Down/Feather• 3,000 g/m2/24 hr breathable
page 40 of the fall 2010
PERFORMANCE FEATURES: Fully Seam-Sealed, Waterproof / Breathable Set-In Sleeves with Adjustable Cuff Tabs and Thumb Hole Gators Stand-Up Collar Detachable Lined Hood with Brim Long Pit-Zips for Superior Breathability Right Chest and Sleeve Pockets with Waterproof Zips Side Welted Zip Pockets Full-Length Outer and Inner Storm Plackets Detachable Powder Skirt with Belt Loop Attachments Large Inside Pockets Open Hem with Adjustable Drawcord Embroidery Access
SHELL: 100% Polyester, 150g/m (CDN)/5.3oz. (USA)LINING: 100% NylonFILL: 70% Down, 30% Feather
SIZES: (M’S) S-3XL ; (W’S) XS-2XLCOLOURS: Black, Navy, Eggplant.
: Limited Edition Colours.
ROGUEboarding jacket
DB-1 | DB-1W
SEALEDS E A M S
ROGUEDB-1 | DB-1WDB-1 | DB-1WDB-1 | DB-1W
Open Hem with Adjustable Drawcord
Detachable Adjustable Hood
Side Welted Zip Pocket
Embroidery Access
Long Pit-ZipsAdjustable Cuff Tabs and Cuff Guards
Black Navy Eggplant
NEWSTYLE
NEWSTYLE
DB-1W: Eggplant
DB-1: Navy
L/E40
ST
OR
MT
EC
H P
ER
FOR
MA
NC
E O
UT
ER
WE
AR
INS
ULA
TE
D JA
CK
ET
S2
3
4
5
1
Key Features:
WaterWaterW ProoF/BreathaBle 2.5-layer shell: durable/aurable/aurable/ nti-abrasive outshell bonded with a 5,000/3,000 H2Xtreme® membrane & a down/feather fillingadvantage:
keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and •regulate your own internal temperature.down provides the lightest, warmest possible insulation, while breathing & wicking•
seam sealeD: the seams are all taped on the inside of the outshell.advantage:
sealed seams combined with the H2Xtreme membrane ensures excellent waterproof protection•
WaterWaterW ProoF PocKets: the bicep pocket is part of the waterproof outshell & has a waterproof zipper on itadvantage:
protects any documents / electronics that you’ve got stored in your pocket•
DetachaBle hooD: the waterproof, fully lined and adjustable hood can be zipped off.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses heat from•this makes the jacket relevant for a broader range of seasons.•
storm FlaP: although the main body zipper is not waterproof it is covered by this flapadvantage:
keeps the wind and moisture from penetrating the zipper•
WearKet
sealedDown/Feather Fill
18 | STORMTECH PERFORMANCE APPAREL
b e s t
Manual Spring2010_V3.indd 18Manual Spring2010_V3.indd 18Manual Spring2010_V3.indd 18Manual Spring2010_V3.indd 18Manual Spring2010_V3.indd 18Manual Spring2010_V3.indd 18
inSulateD outerWearVPr-1 orBit thermal BomBer shell• 2.5 Layer hardshell• 5,000 mm waterproof fabric• 3,000 g/m2/24 hr breathable• Seam sealed• Polyfill Lining
1
2
3
4
5
earearear
Key Features:
WaterWaterW ProoF/BreathaBle 2.5-layer shell: durable/urable/urable/aurable/aurable/ nti-abrasive outshell bonded with a 5,000/3,000 H2Xtreme® membrane & a down/feather fillingadvantage:
keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to •escape and regulate your own internal temperature.
DetachaBle, aDJUstaBle hooD:advantage:
keeps the wind and rain off your head, which is the number one place where your body loses •heat from.Makes the jacket relevant for a broader range of seasons•
WaterWaterW ProoF PocKets: the bicep pocket is part of the waterproof outshell & has a waterproof zipper on itadvantage:
protects any documents / electronics that you’ve got stored in your pocket•
storm FlaP: protects the main body zipper from the wind and rainadvantage:
keeps your body warm and dry •
aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacketadvantage:
keeps the wind and rain out of your jacket so that you can stay warm and dry.•
page 48 of the fall 2010 international cataloguepage 48 of the fall 2010
PERFORMANCE FEATURES: Short-Length Center Inside Hem ContrastLower
Elbow FrontGarages
SHELL:LINING:
SIZES: (M’S) COLOURS:
Contrast Shoulder/Upper Sleeve Yokes
Dropped Back
Center Front Placketwith Gusset Snap
WaterproofBicep Pocket
AdjustableRemovable Hood
Hem Tabswith Velcro
SEALEDS E A M S
VPR-1: Navy/Black
VPR-1: Black/Black
VPR-1: Red/BlackORBITVPR-1
PocketDocument Pocket
HoodFront Hem Band
VelcroInsulated Quilted
48
STO
RM
TECH
STO
RM
TECH
PER
FOR
MA
NC
EP
ERFO
RM
AN
CE
OU
TERW
EAR
OU
TERW
EAR
INS
ULA
TED JA
CK
ETSIN
SU
LATED
JAC
KETS
STORMTECH PERFORMANCE APPAREL | 19
b e t t e rb e t t e r
Manual Spring2010_V3.indd 19Manual Spring2010_V3.indd 19Manual Spring2010_V3.indd 19Manual Spring2010_V3.indd 19Manual Spring2010_V3.indd 19Manual Spring2010_V3.indd 19
1
2
3
Key Features:
WinD/Water resistant 2.5-layer shell: durable/anti-abrasive outshell coated with an extremely breathable, 600 mm water resistant d/w/w/ /w/w r application.advantage:
the d/w/w/ /w/w r coating will never wash or wear out – and shields you from the wind and rain.•keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to •escape and regulate your own internal temperature.
internal storm FlaP: protects the main body zipper from the wind and rainadvantage:
keeps your body warm and dry•because the flap is inside the jacket has a cleaner visual line. •
aDJUstaBle hem & cUFF gUarDs: cuff guards fit snuggly around your wrists and a drawcord at the hem allows you to customize the fit of your jacket.advantage:
keeps the wind and rain out of your jacket so that you can stay warm and dry.•traps the warm air inside your jacket to provided added insulationtraps the warm air inside your jacket to provided added insulationt•
page 41 of the fall 2010 international cataloguepage 41 of the fall 2010
inSulateD outerWearearearDF-2 PeaK DoWn JacKet• 2.5 Layer hardshell• D/W/R Durable Water Resistant• 70/30 Down/Feather Fill
20 | STORMTECH PERFORMANCE APPAREL
g o o dg o o dg o o d
Manual Spring2010_V3.indd 20Manual Spring2010_V3.indd 20Manual Spring2010_V3.indd 20Manual Spring2010_V3.indd 20Manual Spring2010_V3.indd 20Manual Spring2010_V3.indd 20 8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM8/23/10 12:17:41 PM
SYSteM JacKetS
vpx-4 Fusion 5-in-1 System Jacket• 5,000/3,000 • Seam Sealed
b-1 Epsilon 3-in-1 Soft Tech Shell• 8,000/5,000
vpx-4 Fusion 5-in-1 System Jacket Epsilon 3-in-1 Soft Tech Shellb-1 Epsilon 3-in-1 Soft Tech Shellb-1 Epsilon 3-in-1 Soft Tech Shell
tR-1 Vortex System Jacket• D/W/R
xR-4 Nova System Jacket• 2,000/1,000 • Seam Sealed
tpx-2 Explorer 3-in-1 Parka• D/W/R
xLt-2 Explorer 3-1 Jacket• D/W/R
b e s t
b e t t e r
g o o d
SEALEDS E A M S
SEALEDS E A M S
D / W / R
D / W / R D / W / R
Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21Manual Spring2010_V3.indd 21 8/23/10 12:18:10 PM8/23/10 12:18:10 PM8/23/10 12:18:10 PM8/23/10 12:18:10 PM
SYSteM JacKetKetK S
page 51 of the fall 2010 international catalogue
VPX-4 stormtech 5-in-1 ParKa• 2.5 Layer hardshell• Zip-Out Insulated Liner• Zip-off liner sleaves• 5,000 mm waterproof fabric• 3,000 g/m2/24 hr breathable• Seam sealed outshell
page 51 of the fall 2010
vpx-4: Navy/vpx-4: Navy/bblacklack
vpx-4W: Stadium vpx-4W: Stadium rred/ed/bblacklack
PerformanCe featureS: Mid-length parka Centre front placket with elastic Gusset & Snaps with velcro
Chest & Upper Sleeve Yokes front Welted panels with Zippered pockets Underarm Zippered vents Inside Zippered pocket adjustable velcro Cuff tabs Zippered Welded bicep pocket adjustable, Detachable hood
Shell: 100% polyester and taffeta lining, 182g/m(CDN)/6.4oz. (USa)liner: 100% polyester, 115g/m (CDN)/4.1oz. (USa) with taffeta liningfill: polyfill, 85g/m (CDN)/3oz. (USa) (liner only)
SizeS: (m’S) S-4xl ; (W’S) xS-2xlColourS: Granite/black, Navy/black,Stadium red/black, Cool blue/black, black/black.
SEALEDS E A M S
Detachable,adjustable hood
pit-Zips with SnowGuard Mesh
adjustable laserCut velcro Cuff tabs
Zip-out polyfill linerZip-out polyfill liner
Inside Zippered pocket
Zip-off Sleeves(liner)
adjustableDrawcord hem
Cool blue/blackCool blue/blackCool blue/black black/blackblack/blackblack/black Granite/blackGranite/blackGranite/black
Navy/blackStadium red/black
fusion5-in-1 system jacket
vpx-4 | vpx-4w
Sto
rM
teCh
per
for
Ma
NC
e oU
terW
ear
sy
stem
jac
kets
51
The VPX-4 outshell is a 2.5 Layer Hardshell - so it has a durable, anti-abrasive outershell with a waterproof/breathable membrane bonded underneath - and then a mesh liner stitched in to promote air circulation. The liner of the VPX-4 is an insulated polyester shell that has an 85 g/m2 polyfill for extra warmth.
1
2
3
4
5
6
7
Key Features:
WaterWaterW ProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell bonded with a 5,000/3,000 H2Xtreme® membrane and a zip out liner with detachable sleevesadvantage:
all-season jacket that provides just the right amount of warmth & protection when needed•keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape •and regulate your own internal temperature.
seam sealeD: the seams are all taped on the inside of the outshell.advantage:
sealed seams combined with the H2Xtreme membrane ensures excellent waterproof protection•
WaterWaterW ProoF PocKets: the bicep pocket is part of the waterproof outshell & has a waterproof zipper on itadvantage:
protects any documents / electronics that you’ve got stored in your pocket•
aDJUstaBle hem & cUFFs: laser cut cuff tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacketadvantage:
keeps the wind, rain, and snow out of your jacket so that you can stay warm & dry.•
DetachaBle hooD: the waterproof, fully lined and adjustable hood can be zipped off.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses heat •fromthis makes the jacket relevant for a broader range of seasons.•
Pit ZiPs: under-arm zippers that provide access for air circulation.advantage:
allows you to instantly cool off by letting out hot air/letting in cool air•
storm FlaP: although the main body zipper is not waterproof it is covered by this flapadvantage:
keeps the wind and moisture from penetrating the zipper•
22 | STORMTECH PERFORMANCE APPAREL
b e s t
Manual Spring2010_V3.indd 22Manual Spring2010_V3.indd 22Manual Spring2010_V3.indd 22Manual Spring2010_V3.indd 22Manual Spring2010_V3.indd 22Manual Spring2010_V3.indd 22Manual Spring2010_V3.indd 22
SYSteM JacKetKetK S
page 54 of the fall 2010 international catalogue
Xr-4 noVa system JacKet• 2.5 Layer hardshell• Zip-Out Fleece Liner• 2,000 mm waterproof fabric• 1,000 mm breathable• Seam sealed outshell
page 54 of the fall 2010 all 2010 all 2010 all 2010 all 2010
1
2
3
4
5
6
7
Key Features:
WaterWaterW ProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell with H2Xurable/anti-abrasive outshell with H2Xurable/anti-abrasive outshell with H2X®
2,000/1,000 waterproof/breathable technology.advantage:
all-season jacket that provides just the right amount of warmth & protection when needed.ll-season jacket that provides just the right amount of warmth & protection when needed.ll-season jacket that provides just the right amount of warmth & protection when needed.•keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to eeps you comfortable & dry by keeping the moisture out and allowing your body vapour to eeps you comfortable & dry by keeping the moisture out and allowing your body vapour to •escape and regulate your own internal temperature.
seam sealeD: the seams are all taped on the inside of the outshell.he seams are all taped on the inside of the outshell.he seams are all taped on the inside of the outshell.advantage:
sealed seams combined with the H2xtreme• ® membrane ensures excellent waterproof protection. membrane ensures excellent waterproof protection. membrane ensures excellent waterproof protection.
ZiP oUt liner: the liner is made of anti-pill fleece which has been lined with he liner is made of anti-pill fleece which has been lined with he liner is made of anti-pill fleece which has been lined with taffeta.taffeta.tadvantage:
fleece makes an excellent insulative liner under an outshellleece makes an excellent insulative liner under an outshell•the taffeta helps block the wind when the liner is worn on its own as a jacket.•
DetachaBle hooD: the waterproof, fully lined hood and adjustable hood can be zipped off.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses •heat fromthis makes the jacket relevant for a broader range of seasons•
Pit ZiPs: under-arm zippers that provide access for air circulation.advantage:
allows you to instantly cool off by letting out hot air/letting in cool air.•
storm FlaP: although the main body zipper is not waterproof it is covered by this flap.advantage:
keeps the wind and moisture from penetrating the zipper.•
aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket.advantage:
keeps the wind, rain, and snow out of your jacket so that you can stay warm and dry.•
STORMTECH PERFORMANCE APPAREL | 23
b e t t e rb e t t e rb e t t e r
SYSteM JacKetKetK SSYStPX-2 eXPlorer 3-in-1 ParKa•• 2.5 Layer hardshell•• Zip-Out Fleece Liner•• D/W/R Durable Water Resistant
1
2
3
4
5
Key Features:
WinD anD Water resistant 2.5-layer shell: durable/anti-abrasive outshell with the permanent d/w/w/ /w/w r coating that blocks out the wind and rain.advantage:
the d/w/w/ /w/w r coating will never wash or wear out – and shields you from the wind and rain.•keeps you comfortable and dry by keeping the moisture out and allowing your body vapour •to escape and regulate your own internal temperature.
ZiP oUt liner: the liner is made of anti-pill fleece which has been lined with taffeta.taffeta.tadvantage:
fleece makes an excellent insulative liner under an outshell•the taffeta helps block the wind when the liner is worn on its own as a jacket.•
rollaWollaWolla ay Way W hooD: the hood can be rolled into the collar when not being used.advantage:
keeps the wind and rain off your head, which is the number one place where your body loses •heat fromthis makes the jacket relevant for a broader range of seasons•
storm FlaP: although the main body zipper is not waterproof it is covered by this flap.advantage:
keeps the wind and moisture from penetrating the zipper.•
aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket.advantage:
keeps the wind, rain, and snow out of your jacket so that you can stay warm and dry.•
Page57oftheFall2010international cataloguePage 57 of the Fall 2010
24 | STORMTECH PERFORMANCE APPAREL
g o o d
Manual Spring2010_V3.indd 24Manual Spring2010_V3.indd 24Manual Spring2010_V3.indd 24Manual Spring2010_V3.indd 24Manual Spring2010_V3.indd 24 8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM8/23/10 12:18:40 PM
Sport ShellS
xG-1 Trident MicroflexTM Storm Shell • 10,000/10,000 • Seam Sealed• 2.5-Layer Bonded Hardshell
ssR-2 Stratus Storm Jacket• 5,000/3,000 • Seam Sealed• 2.5-Layer Bonded Hardshell
ssR-1 Nautilus Storm Shell• 8,000/3,000 • Seam Sealed• 2.5-Layer Bonded Hardshell
xmR-1 Fleet Ripstop Rainshell• 5,000/3,000 • D/W/R • 2-Layer Hardshell
sR-1 Micro Light Shell• D/W/R • Mesh Lining
xRt-2 Nordic Thermal Shell• D/W/R • Fleece Lined
px-1 Squall Packable Jacket• D/W/R • Mesh Upper Body
pCx-1 Aerolite Packable Rain Poncho • D/W/R • 86g/m2 (3 oz)
b e s t
b e t t e r
g o o d
SEALEDS E A M S
SEALEDS E A M S
SEALEDS E A M S
D / W / R D / W / R
D / W / R D / W / R D / W / R
8/23/10 12:19:13 PM8/23/10 12:19:13 PM8/23/10 12:19:13 PM
1
2
3
4
5
6
Key Features:
WaterProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell bonded with a 8,000/5,000 H2Xtreme® membrane and mesh lining. advantage:
excellent protection against the elements & surroundings is achieved while maintaining an extremely •lightweight and comfortable shell.keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to escape and •regulate your own internal temperature.
4-Way stretch oWay stretch oW Utshell: advantage:
Maximum manoeuvrability•very quietvery quietv•
WaterProoF PocKet: the chest pocket has been built into the jacket outshell and has a waterproof zipper.advantage:
waterproof zipper ensures that the pocket is completely impenetrable to the elements.•
aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket.advantage:
keeps the wind and rain / snow out of your jacket so that you can stay warm and dry•
insiDe FUll length storm PlacKet:advantage:
keeps the wind and moisture from penetrating the zipper•
aUDio-access Port:ort:ort internal port allows ear-bud access from the inside of your jacket to the waterproof chest pocket.advantage:
this ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and •catching on things.
Sport Sport Sport ShellShellShellXg-1 triDent microFleX™ storm shell• 2.5 Layer hardshellhardshell• 8,0008,000 mm waterproofwaterproof fabric• 5,0005,000 mm breathablebreathable• SeamSeam Sealed
page 62 of the fall 2010 international cataloguepage 62 of the fall 2010
26 | STORMTECH PERFORMANCE APPAREL
b e s t
Manual Spring2010_V3.indd 26Manual Spring2010_V3.indd 26Manual Spring2010_V3.indd 26Manual Spring2010_V3.indd 26Manual Spring2010_V3.indd 26Manual Spring2010_V3.indd 26Manual Spring2010_V3.indd 26
perforMance fleecefleece provides excellent insulation but weighs a fraction of more expensive alternatives such as wool. in fact, even when wet fleece retains much of its insulative properties. this combined with the fact that it is extremely breathable makes it perfect for activewear. fleece is machine washable and if hung up dries very quickly (it should not be put in a dryer unless on tumble setting with no heat). for those that are allergic to wool fleece also provides an excellent option.
fleece is a knitted fabric - which means that it is constructed of a series of looped yarns. over time these loops break down due to wear and washing. this causes a loop to break and form two single strands. these strands are what are eventually worn down and curled up to form pills on a fleece. pilling makes a fleece look tired and old - so we try to prevent that.
anti-Pill Fleece: some companies will prevent pilling in the short term only - by laminating the fleece fabric with a coating that protects the loops. over time however this coating washes/wears off, and leaves the fleece exposed.
storMtecH does not laminate its fleece. instead we take the fleece fabric directly from the mill, roll it out, and then comb the loops all up to the surface so that they are exposed. then we trim the tops of the loops to cut down the strands and minimize how much pilling could ever possibly occur on the garment. some fleeces are trimmed shorter (ie/ bwJ-3) and some are trimmed longer (ie/ sX-2).
micro Fleece refers to the thickness of the yarn that is used to knit the fleece. in fact - not only are the yarns finer, but they are more closely compacted together. the result is a tighter fabric that has less space between the knit of the fabric. less space means less heat loss so the microfleece is warmer than regular fleece. finer yarn means that the fleece feels softer and smoother (also has a smoother, finer appearance).
Bonded microfleece refers to two pieces of microfleece that have been bonded together - resulting in a new peice of fabric that is very dense and warm, yet quite light.
recycled Fleece refers to fleece fabric that has been partially developed from recycled plastic bottles (ie. water, soda pop, etc). this fleece has the same look and feel of our regular anti-pill fleece, but is made of 30% recycled content.
Polar Fleece refers to our heaviest fleece garments - which are any of those that are at least 300 g/m2. it is distinctive because it is so thick and fluffy.
meryl® actisystem Fleece refers to a patented fleece fabric specifically designed to provide maximum wicking properties - thereby making it an excellent alternative for either a base layer or a mid layer.
refers to a patented fleece fabric specifically designed to provide maximum wicking properties - thereby making it an excellent
CASUAL FLEECE
Style
BMF-1 Bonded BMF-1 Bonded Microfleece
GRF-1Microfleece
GRF-2R
SX-3
Polar MicrofleeceSX-2
VX-2
TECHNICAL FLEECE
Style Seam Style Seam Sealed
Fabric WP/BR
3 LAYER BONDED
BWJ-3 8/3
BWJ-2 8/3
F-2 3/3
Meryl Fleece
ML-1StretchFleece
FZF-1
STORMTECH PERFORMANCE APPARELSTORMTECH PERFORMANCE APPAREL | 27
Manual Spring2010_V3.indd 27Manual Spring2010_V3.indd 27Manual Spring2010_V3.indd 27Manual Spring2010_V3.indd 27Manual Spring2010_V3.indd 27 8/23/10 12:19:36 PM8/23/10 12:19:36 PM
perforMance fleece
bwJ-3 Aurora Bonded Fleece Jacket• 8,000/3,000• 300g/m2 (10.6 oz)
f-2m Denali Performance Fleecet• 3,000/3,000• 270g/m2 (9.5 oz)
bwJ-2 Polaris H2X® Fleece Shell• 8,000/3,000• 300g/m2 (10.6 oz)
mL-1 Meryl® Fleece Jacket• 260g/m2 (9.2oz)
fZf-1 Tundra Stretch Fleece• 260g/m2 (7 oz)
bmf-1 Eclipse Fleece Shell• 306g/m2 (10.8 oz)
sx-2 Chinook Fleece Full-Zip Shell• 300g/m2 (10.6 oz)
newstyLe
b e s t
b e t t e r
g o o dg o o d
8/23/10 12:20:04 PM8/23/10 12:20:04 PM8/23/10 12:20:04 PM
1
2
3
4
Key Features:
WaterWaterW ProoF/BreathaBle 3-layer shell: lightweight/wightweight/wightweight/ arm microfleece outshell bonded with a 8,000/3,000 H2Xtreme® membrane and an inside mesh liningadvantage:
ensures that you’ll stay dry if you get caught in a sudden rain shower•Helps protect your body from the wind•
ZiPPer garage: The Zipper parks underneath a soft fleece pocket at the top of the neck.advantage:
keeps the cold metal of the zipper from contacting your neck directly.•
aDJUstaBle hem & elastic cUFFs: a drawcord at the hem allows you to customize the fit of your a drawcord at the hem allows you to customize the fit of your ajacket. elastic cuffs ensure that the sleeves contour to your wristadvantage:
keeps the wind, rain, and snow out of your jacket so that you can stay warm & dry.•keeps warm air tracked around your body inside the fleece to provide insulation•
DraFt FlaP: inner flap lies under the zipperadvantage:
protects your body from any wind or moisture might enter through the zipper•because the flap is inside the jacket has a cleaner visual design.•
perforMance fleece
Page87oftheFall2010international catalogue
BWJ-3 h2X® BonDeD Fleece JacKet Page 87 of the Fall 2010
bbWJ-3:WJ-3: b blacklack
bbWJ-3W: NavyWJ-3W: Navy
PerformanCe featureS: Mid length front & back Yokes Curved Into raglan
armhole elbow Seaming and Inside Storm placket Zipper Garage on chest & Side pockets Contrast frame front panel lining elastic Cuffs adjustable hem Drawcord Inside back Neck patch
Shell: 100% polyester Micro fleece bonded with Waterproof Membrane and polyester Mesh, 300g/m (CDN)/10.6oz. (USa)
SizeS: (m’S) S-3xl ; (W’S) xS-2xlColourS: black, Coffee, Navy.
lower pocketswith frame and Garage
elbow Seaming
elastic Cuff
Inside Stormplacket
black
Navy
Coffee
lack
Navy
Coffee
aurorabonded fleece jacket
bwj-3 | bwj-3w
St
or
Mt
eC
h p
er
for
Ma
NC
e fle
eC
eP
er
fo
rm
an
ce
fl
ee
ce
87
before softshells became so popular storMtecH was producing a very unique type of fleece; a three-layer bonded fleece shellthat consisted of the outer fleece fabric beingbonded to an H2Xtreme membrane, which then had a polyester mesh liner bonded inside. The result was essentially a fleece jacket thatwas extremely water and wind resistant.
now consider how a bX-2 would look if you turned it inside out - and compare that to the bwJ-3.
The BWJ-3 is a microfleece that has been bonded to an H2Xtreme membrane to produce a jacket-like product. Typically fleece is thought of as a mid layer - or the insulative layer - but the BWJ-3 can actually used as an outerlayer as well.
• 3 Layer Bonded Fleece• 8,000 mm waterproof fabric• 3,000 mm breathable
STORMTECH PERFORMANCE APPAREL | 29
b e s t
1
2
3
4
Key Features:
anti-Pill WicKing Fleece: a smooth outer face combined with a light and fluffy inner face.a smooth outer face combined with a light and fluffy inner face.aadvantage:
smooth outer surface makes this fleece unique in that it can be silk screened or have a heat •transfer applied.smooth surface also ensures this fleece stays looking great longer than typical fleece•unique actisystem™ technology is designed to wick moisture away from your body to keep •you dry and comfortable
high stretch content:content:content this fleece hugs your body like a base layer.advantage:
a snug fit keeps this moisture wicking fabric close to your skin and maximizes its ability to a snug fit keeps this moisture wicking fabric close to your skin and maximizes its ability to a•keep you dry and comfortable. this allows the garment to be a base layer and insulative mid layer all in one
aDJUstaBle hem: a drawcord at the hem allow you to customize the fit of the fleece.a drawcord at the hem allow you to customize the fit of the fleece.aadvantage:
prevents any draft from going up the garment, and traps warm air around your body•
¼ ZiP necK:advantage:
provides rapid release of warm air trapped inside the fleece when you need to cool down fast.•
page 91 of the fall 2010 international cataloguepage 91 of the fall 2010
perforperforMance fleeceml-1 meryl® Fleece PUlloVer• 260g/m260g/m2 ; 9.2 oz• 93% MerylMeryl® Actisystem™ Fleece / 7% Spandex• QuarterQuarter Zip
30 | STORMTECH PERFORMANCE APPAREL
b e t t e r
Manual Spring2010_V3.indd 30Manual Spring2010_V3.indd 30Manual Spring2010_V3.indd 30Manual Spring2010_V3.indd 30Manual Spring2010_V3.indd 30Manual Spring2010_V3.indd 30
1
2
3
Key Features:
anti-Pill recycleD Fleece: a lightweight fleece made partially of recycled plastic drink bottles.advantage:
anti pill fleece will stay looking great longer than regular fleece from other suppliers•recycled content allows each of us to do our part protecting the environment•
Flat locK stitching: inside seams are stitched down.advantage:
flat lock stitches are less obtrusive and more comfortable against your body•
aDJUstaBle hem: a drawcord at the hem allow you to customize the fit of the fleece.a drawcord at the hem allow you to customize the fit of the fleece.aadvantage:
prevents any draft from going up the garment, and traps warm air around your body•
page 98 of the fall 2010 international cataloguepage 98 of the fall 2010
perforMance fleeceance fleecesX-2 chinooK Fleece FUll-ZiP shell• 300g/m2 ; 10.6 oz• 100% Polyester Polar Fleece• Full Zip
STORMTECH PERFORMANCE APPAREL | 31
g o o d
Manual Spring2010_V3.indd 31Manual Spring2010_V3.indd 31Manual Spring2010_V3.indd 31Manual Spring2010_V3.indd 31Manual Spring2010_V3.indd 31Manual Spring2010_V3.indd 31Manual Spring2010_V3.indd 31
cooLMAX® Extreme is the original non-chemically treated performance fabric that has helped top athletes push harder and longer for years. Now, however, cooLMAX® Extreme is being discovered for the cool comfort that it brings to everyday apparel.
STORMTECH only uses cooLMAX® Extreme – in order to provide the most cooLMAX® Extreme technology in our garments.
Air Flow
Body Perspiration Vapour
Close up of three Channel Fiber
Moisture being Wicked away
Evaporative Cooling System
Perf
orm
an
ce
Coolmax Fiber Content
25% 50% 85% 100%
Coolmax® Everyday
Coolmax® Active
Coolmax® EXTREME
Three levels of cooLMAX® Extreme fabric are available – based upon their percentage of cooLMAX® Extreme fiber content. Check the label – if it’s not made from cooLMAX® Extreme, it’s not a STORMTECH garment.
WickingMoisture
Invisible FreshnessShield
Bacteria Fresh Air FreeFrom Bacteria
Skin Fabic
cooLMAX® Extreme freshFX uses silver-based technology to protect fabrics from odour-causing bacteria for the standard life of your garments.
TE
CH
NIC
AL
Po
Lo
s/B
AL
os
/BA
Ls
E L
AY
ER
s
Manual Spring2010_V3.indd 32Manual Spring2010_V3.indd 32Manual Spring2010_V3.indd 32Manual Spring2010_V3.indd 32Manual Spring2010_V3.indd 32Manual Spring2010_V3.indd 32Manual Spring2010_V3.indd 32 8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM8/23/10 12:21:00 PM
sto
rmtech
dr
yr
yr
-y-
y
tech recycyc
cycy
le
d
St
o te
c
ou
r r
l
Exclusive STORMTECH Dry-Tech double layer fabric uses capillary action to wick moisture away form your skin and up to the surface of the fabric.
Because Dry-Tech fabrics are made of our X-Shaped yarn, the fabric has an extremely large surface area for moisture to spread out over. The result is a super quick dry fabric.
Dry-Tech’s light weight & smooth hand feel make it perfect for silk screening or heat transfer. However please note that heat transfers should not exceed 150°C/300°F
Dry-Tech Styles are also available in a 50% recycled content fabric
Body
Vap
our
Top Layer
Close up of X-Shaped Filament
Filament LayerFilament
Manual Spring2010_V3.indd 33Manual Spring2010_V3.indd 33 8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM8/23/10 12:21:13 PM
perforMance poloS
Gfx-2 Coolmax® fresh FX Popcorn Polo• Coolmax® Extreme Fresh FX
Gpx-2 Coolmax® Extreme 2 Tone Polo• Coolmax® Extreme
dtx-1 Dry-Tech S/S Sport Polo• Dry-Tech Quick-Dry
sat053 Dry-Tech Team Polo• Dry-Tech Quick-Dry
WickingMoisture
Invisible FreshnessShield
Bacteria Fresh Air FreeFrom Bacteria
Skin Fabic
Air Flow
Body Perspiration Vapour
Close up of three Channel Fiber
Moisture being Wicked away
Evaporative Cooling System
b e s t
b e t t e rb e t t e r
g o o d
Body
Vap
our
Top Layer
Close up of X-Shaped Filament
Filament Layer
Top Layer
Filament Layer
newCoLouR
Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34Manual Spring2010_V3.indd 34 8/23/10 12:21:49 PM8/23/10 12:21:49 PM8/23/10 12:21:49 PM8/23/10 12:21:49 PM
athletic SuitS
saJ200Dry-Tech Full-ZipTraining Jacket• Dry-Tech Quick-Dry
dtJ-001Dry-Tech Track Jacket• Dry-Tech Quick-Dry
dtp-001Dry-Tech Track Pant• Dry-Tech Quick-Dry
sap200Dry-Tech Full-ZipTraining Pant• Dry-Tech Quick-Dry
saJ400Epic Athletic Jacket• Polyester Twill
ts-1Blaze Track Jacket• Polyester Mesh Lining
stxp-1Blaze Athletic Twill Pant• Polyester Micro Twill
stxp-1Blaze Athletic Twill Pant• Polyester Micro Twill
newstyLe
sat120Dry-Tech Selected Jersey• Dry-Tech Quick DryPolyester
sat036Dry-Tech L/S Layering Tee• Dry-Tech Quick DryPolyester
sat100Dry-Tech Club Jersey• Dry-Tech Quick DryPolyester
sat035Dry-Tech S/S Layering Tee• Dry-Tech Quick DryPolyester
b e s t
b e t t e r
b A s e L AY e r s
8/23/10 12:22:37 PM8/23/10 12:22:37 PM8/23/10 12:22:37 PM
www.stormtech.eu
is tHe result of countless Hours of researcH, design, & testing by our product developMent teaM and atHletes. storMtecH’s fall 2010 collection blends tecHnical & functional durability witH urban styling.
DuPont™
fabric protector
REPEL
WATERPROOF
BREATHABLE
D / W / R
SEALEDS E A M S
h2XTreMe™ FABricS hAve A Micro-porouS MeMBrAne BonDeD To The unDerSiDe ThAT proviDeS A perMAnenT wATerprooF/BreAThABLe BArrier oF AT LeAST 5,000 MM. GARMENTS MADE WITH h2XTreMe FABricS ThAT hAve Been SeAM SeALeD Are coMpLeTeLy wATerprooF.
SeALeD SeAMS Are eSSenTiAL ASPECTS OF A GARMENT’S conSTrucTion. To enSure ABSoLuTe wATerprooFneSS our proDucTS reLy on STorMTech SeAM SeALing TechnoLogy.
STorMTech Dry-Tech FABricS proviDe powerFuL MechAnicAL MoiSTure MAnAgeMenT By uSing Fine FiLAMenTS To wick MoiSTure AwAy FroM The Skin.
cooLMAX® eXTreMe FreShFX oFFerS eXTreMe MechAnicAL MoiSTure MAnAgeMenT coMBineD wiTh proTecTion AgAinST oDor-cAuSing BAcTeriA.
gArMenTS LABeLeD AS cooLMAX® EXTREME ARE REQUIRED TO BE MADE FROM 100% COOLMAX MECHANICAL MoiSTure MAnAgeMenT FABric.
MeryL® AcTiSySTeM™ iS A high perForMAnce FiBer SySTeM ThAT proviDeS eXceLLenT wicking AnD Drying properTieS.
STORMTECH USES A 70/30 DOWN-FeATher BLenD To proviDe opTiMAL wArMTh SpreAD ThroughouT The gArMenT.
The SAMe greAT MechAnicAL MoiSTure MAnAgeMenT TechnoLogy OF DRy-TECH, BUT MADE FROM recycLeD MATeriALS.
STorMTech D/w/r TechnoLogy proviDeS eFFecTive AnD hArD weAring wATer reSiSTAnT/BreAThABLe proTecTion oF AT LeAST 600 MM
TeFLon® winD/wATer repeLLenT TechnoLogy proviDeS Long LASTing proTecTion AgAinST THE ELEMENTS AS WELL AS OIL & WATER-BASED STAINS, DUST, AND Dry SoiL. The reSuLT iS A gArMenT ThAT LookS newer Longer AnD iS eASier To cAre For.
h2X® FABricS hAve A Micro-porouS coATing AppLieD To The unDerSiDe ThAT proviDeS A perMAnenT wATerprooF/BreAThABLe BArrier oF up To 5,000 MM. GARMENTS MADE WITH h2X® FABricS ThAT hAve Been SeAM SeALeD Are coMpLeTeLy wATerprooF.
h2X® STreTch FABricS conTAin SpAnDeX To proviDe MAXiMuM MANEUVERABILITy, WHILE ALSO hAving wATerprooF/BreAThABLe BArrierS AppLieD The unDerSiDe. BecAuSe oF The STreTch oF The FABric TheSe STyLeS hAve noT hAD Their SeAMS TApeD.
StorMtech perforMance technologY
sto
rmtech
dr
yr
yr
-y-
y
tech recycyc
cycy
le
d
ST
O R M TE
CH
OU
R W O R
LD
8/23/10 12:22:43 PM8/23/10 12:22:43 PM8/23/10 12:22:43 PM