STORAGE CUPBOARDS, CABINETS & LOCKERS · Storage Cupboards Storage Cupboards, Cabinets & Lockers...
Transcript of STORAGE CUPBOARDS, CABINETS & LOCKERS · Storage Cupboards Storage Cupboards, Cabinets & Lockers...
Furniture & Equipment for the Medical World2013
STORAGE CUPBOARDS, CABINETS & LOCKERS
Storage Cupboards, Cabinets & Lockers Storage Cupboards
email: [email protected] fax: +44 (0)1258 455056
• Single-point locking using a flush fitting CAM lock fitted with a handle (supplied with 2 keys)
• 0.9mm mild steel welded construction• Modular design allows for easy interchange with HTM 63 storage systems• Worksurface (removable to assist with positioning under existing worktops)• Available with plastic trays/shelves or shelves & dividers
Plastic Trays• Interchangeable with our popular CT range• 3 x 100mm, 2 x 160mm Trays supplied per cupboard• Internal tray dimensions 360 x 430mm (max load per tray 5kg)• Each tray supplied with four removable dividers (2 x long, 2 x short) complete
with a plastic clip on label cover• Each cupboard is supplied with five sheets of perforated coloured label strips
(white, blue, green, yellow and red)
Flat Shelves• Down turned sides• Adjustable at 50mm increments• 3 shelves per cupboard
Shelves & Dividers• Down turned sides• Adjustable at 50mm increments• Supplied with dividers to assist with the segregation of stored items
(adjustable at approx 25mm increments)• 3 shelves & 12 dividers per cupboard
Features
Overall Dimensions (w x d x h)
• 510 x 536 x 867mm
Standard Colours
• Paint - White• Worksurface - Beech
Right Hinging Left Hinging Description Weight
Without Drawer
BU005 BU020 Single Door, 870mm High, Plastic Trays 39.0kg
BU010 BU025 Single Door, 870mm High, Flat Shelves 34.0kg
BU015 BU030 Single Door, 870mm High, Shelves & Dividers 38.0kg
With Drawer
BU065 BU080 Single Door, Drawer, 870mm High, Plastic Trays 40.0kg
BU070 BU085 Single Door, Drawer, 870mm High, Flat Shelves 37.0kg
BU075 BU090 Single Door, Drawer, 870mm High, Shelves & Dividers 41.0kg
Storage Cupboards - Single Door, 870mm High
BU005
Shelves/ Dividers
TraysFlat Shelves
BU075
Options
• BU901 - Joining Kit & Full Width Worktop (connects two cupboards)
02
Storage Cupboards Storage Cupboards, Cabinets & Lockers
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Single-point locking using a flush fitting CAM lock fitted with a handle (supplied with 2 keys)
• 0.9mm mild steel welded construction• Modular design allows for easy interchange with HTM 63 storage systems• Available with plastic trays/shelves or shelves & dividers
Plastic Trays• Interchangeable with our popular CT range• 7 x 100mm, 5 x 160mm Trays supplied per cupboard• Internal tray dimensions 360 x 430mm (max load per tray 5kg)• Each tray supplied with four removable dividers (2 x long, 2 x short) complete
with a plastic clip on label cover• Each cupboard is supplied with ten sheets of perforated coloured label strips
(white, blue, green, yellow and red)
Flat Shelves• Down turned sides• Adjustable at 50mm increments• 8 shelves per cupboard
Shelves & Dividers• Down turned sides• Adjustable at 50mm increments• Supplied with dividers to assist with the segregation of stored items(adjustable
at approx 25mm increments)• 8 shelves & 32 dividers per cupboard
Features
Overall Dimensions (w x d x h)
• 500 x 530 x 1850mm
Standard Colours
• Paint - White
Right Hinging Left Hinging Description Weight
BU095 BU110 Single Door, 1850mm High, Plastic Trays 72..0kg
BU100 BU115 Single Door, 1850mm High, Flat Shelves 63.0kg
BU105 BU120 Single Door, 1850mm High, Shelves & Dividers 73.0kg
Storage Cupboards - Single Door, 1850mm High
BU110Trays
Flat Shelves
Shelves/ Dividers
Options
• BU902 - Joining Kit (connects two cupboards)
03
Storage Cabinets
email: [email protected] fax: +44 (0)1258 455056
• Single-point locking using a flush fitting CAM lock fitted with a handle (supplied with 2 keys)
• Adjustable & removable 250mm deep shelves• 0.9mm mild steel welded construction• Mounting holes in back (fixings not included)• Modular design allows for easy interchange with HTM 63 storage systems
Features
Standard Colours
• Paint - White
Storage Cabinets - Single & Double Door
Item Overall Dimensions (w x d x h) Shelves Shelf Size Weight
Single Door
SC005 300 x 300 x 600mm 2 238 x 255mm 13.0kg
SC010 500 x 300 x 600mm 2 438 x 255mm 16.5kg
SC015 500 x 300 x 900mm 3 458 x 255mm 24.5kg
SC020 600 x 300 x 600mm 2 538 x 255mm 19.5kg
SC025 600 x 300 x 900mm 3 358 x 255mm 26.0kg
Double Door
SC030 800 x 300 x 600mm 4 355 x 255mm 26.5kg
SC035 800 x 300 x 900mm 6 355 x 255mm 42.0kg
SC040 1000 x 300 x 600mm 4 458 x 255mm 32.5kg
SC045 1000 x 300 x 900mm 6 458 x 255mm 45.0kg
SC005
SC015
SC045
SC040
Storage Cupboards, Cabinets & Lockers
04
Other
Colours
Available
Storage Cabinets
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Single-point locking using a flush fitting CAM lock fitted with a handle (supplied with 2 keys)
• Adjustable & removable 155mm deep shelves (2 per cabinet)• 0.9mm mild steel welded construction• Mounting holes in back (fixings not included)• Modular design allows for easy interchange with HTM 63 storage systems• Supplied with self-adhesive labels ‘First Aid’ & ‘Clinical Reagents’
Features
Standard Colours
• Paint - White
Item DescriptionOverall Dimensions (w x d x h) Weight
GC005 First Aid & Clinical Reagents, Small 300 x 200 x 400mm 5..0kg
GC010 First Aid & Clinical Reagents, Medium 400 x 200 x 400mm 6.0kg
GC015 First Aid & Clinical Reagents, Large 400 x 200 x 600mm 8.0kg
Storage Cabinets - First Aid & Clinical Reagents
GC005
GC010
GC015
Storage Cupboards, Cabinets & Lockers
05
Storage Cabinets
email: [email protected] fax: +44 (0)1258 455056
• Range of key cupboards to securely store 20/40/60/120 keys• Single-point locking using a CAM lock (supplied with 2 keys)• 0.9mm mild steel welded construction• Mounting holes in back (fixings not included)• Supplied with a self-adhesive data strips to support an identification label
Features
Standard Colours
• Paint - Grey
Storage Cabinets - Key
KS/20
Item Hooks Overall Dimensions (w x d x h) Weight
KS/20 20 Hooks 275 x 55 x 200mm 1.5kg
KS/40 40 Hooks 310 x 55 x 280mm 2.5kg
KS/60 60 Hooks 310 x 55 x 440mm 4.0kg
KS/120 120 Hooks 380 x 55 x 600mm 6.0kg
KS/40
KS/60
KS/120
Storage Cupboards, Cabinets & Lockers
06
Storage Lockers
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Range of personal effects lockers• Single Door lockers supplied with a double coat hook & shelf• Double door lockers supplied with a double coat hook• 3, 4 & 5 door lockers do not have a double coat hook or shelf
• Available as individual lockers or in nests of two or three• Choice of CAM Lock (supplied with 2 keys) or hasp & staple (padlock/not
supplied)• 0.9mm mild steel welded construction• Mounting holes in back (fixings not included)• Optional stands and sloping tops
Features
Overall Dimensions (w x d x h)
• 300 x 450 x 1800mm (21.5kg)
Hasp & StapleCompartments
Nest Bank
1 2 3
1 PL005 PL030 PL055
2 PL010 PL035 PL060
3 PL015 PL040 PL065
4 PL020 PL045 PL070
5 PL025 PL050 PL075
Storage Lockers - Personal Effects
Standard Colours
• Body - Grey• Doors - Blue
CAM LockCompartments
Nest Bank
1 2 3
1 PL080 PL105 PL130
2 PL085 PL110 PL135
3 PL090 PL115 PL140
4 PL095 PL120 PL145
5 PL100 PL125 PL150
Options
Nest Bank
1 2 3
Stand PL900 PL905 PL910
Sloping Top PL915 PL920 PL925
Storage Cupboards, Cabinets & Lockers
07
PL105 - Single compartment lockers in a nest of 2
PL095
PL080PL915 - Sloping top
email: [email protected] fax: +44 (0)1258 455056
• Dimensions are stated in millimetres (width x depth x height)• Weights are stated in kilograms• Please ensure you are aware of the item size and weight prior to ordering
Dimensions & Weight
• All castors are fitted with non-marking tyres (with the exception of some anti-static versions)
• Anti-static castors can be identified by a yellow thread guard or a yellow mark on the edge of the tyre
• Castors are selected to suit the anticipated use of the trolley/piece of equipment
• Castors and wheel bearings do not require specific maintenance other than regular cleaning. The use of oil will breakdown the grease applied to the bearings, reducing the life of the castor. We recommend that fittings are checked regularly and re-tightened as required
• Where anti-static castors are fitted, we recommend that the tyre is periodically cleaned to remove any dirt to ensure a good contact between the tyre and the floor
Castors
• Locks should operate smoothly. If they do not, please arrange urgent attention and where necessary obtain a replacement
• Locks require only minimal maintenance and should only be lubricated using a dry lubricant such as graphite which can be purchased from most locksmiths (NEVER USE OIL)
• When ordering replacement locks or keys, please ensure that the product code, and any letters/numbers from the key and lock are available
Locks & Keys
Paint
• We use 304 and 430 grade stainless steel• Grade 304 is non-magnetic and used on products which are not painted• Grade 430 is magnetic and used on painted products• Other grades are available on request, i.e. 316• Please note that the term ‘stainless’ is not entirely accurate, as certain chemicals
can ‘eat’ into the surface. In particular ‘iodine’ which can badly corrode/stain and as a result should not be used as a cleaning agent
Stainless Steel
• Wood products are manufactured from FSC accredited materials• High pressure laminate bonded to MDF• Melamine faced MDF
• Edges are protected with 2mm ABS/T-Barb edging or sealed with varnish• Both laminate and melamine panels offer some resistance to water penetration
under normal usage• We only use water based adhesives and varnishes
Laminate & Wood Products
• Upholstered panels are manufactured from ‘Flame Retardant’ materials, independently tested to ‘BS5852 Ignition Source 5’ (BS7176 Medium Hazard)
• Vinyl’s offer resistance to:• Melsept SF - Code CH - B:4422M32 (0.5% / 5%)• Hexaquart S - Code CH - B:406432 (1.5% / 5%)• Meliseptol - Code CH - B:4273M92 (Undiluted)
• All foam is ‘Fire Retardant’ and free of ‘Hexa-Bromo-Cyclo-Dodecane’
Upholstery
• All products are latex free
Latex
• We only use lead-free epoxy/polyester powder paint• Where possible colours are applied in special booths to allow for overspray to be
recycled• Alterative colours are available, this may be incur a small surcharge
General Information
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• The maintenance of high standards of cleanliness on all surfaces and equipment is a crucial factor in the prevention and control of infection. Whilst dust, dirt and moisture can harbour infection, the key risks are associated with contamination arising from contact with blood, body fluids, mucous membranes and damaged skin. In all cases surfaces must be thoroughly cleaned and disinfected in order to destroy pathogenic micro organisms.
• Bristol MaidTM products have been designed for use in demanding environments; full cleaning instructions can be downloaded from www.bristolmaid.com
Cleaning
Hospital Metalcraft meets its obligations as a business to business producer of Electrical and Electronic Equipment (EEE) through:
• Membership of the Veolia Environmental Services WEEE, (Waste Electrical and Electronic Equipment), Producer Compliance Scheme (Registration No. WEE/KE0677RX)
• Marking EEE placed on the market by Hospital Metalcraft with the mandatory crossed out wheeled bin symbol and Bristol Maid logo
• Making information available, (for EEE placed on the market after April 2007), to assist those engaged in treatment, recovery and recycling activities
• Arranging for the collection, treatment, recovery and environmentally sound disposal of obligated WEEE
Customers are advised that infected medical devices are not included within the scope of the WEEE Regulations and that arrangements described above do not extend to such products
Bristol Maid website (www.bristolmaid.com) and Terms & Conditions refer
WEEE Regulations
Standards & Symbols
Signifies that the product conforms with applicable European directives
Meets appendix A (StabilityRequirements) of BS3619:1976 MobileInfusion Stands
Signifies that the product has been tested to European standards for electromagnetic compatibility
Meets BS4068: 1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists’ use
Signifies that the product does not use any hazardous substances in its electrical components
Meets BS1765: Part 1: 1990 Specification for general purpose bedside lockers for patients (with the exception of door hinges which are more robust and practical)
Flame RetardantMeets BS2483:1977 Specification for overbed tables
Resistant to Cold LiquidsFive Pin - BS3621 Anti Pick & Drill, Key Retaining Five Pin Cylinder Lock
Resistant to Mechanical DamageSix Pin - BS3621 Anti Pick & Drill, Key Retaining Six Pin Cylinder Lock
Department of Health Green Book
Independently tested to BS2881: 1989 (Security Level One) Specification for Cupboards for the Storage of Medicines in Health Care Premises
Independently tested to UN3291 - Certificate of Packaging Performance for the Transportation of Clinical Waste
Meets The Misuse of Drugs (Safe Custody) Regulations 1973
General Information
Paint Colours (Lead-free Epoxy/Polyester)
Upholstery Colours (Flame Retardant)
Laminate Colours
White Red Spearmint Light Grey
Black Orange
Signal Yellow Signal Blue Signal Green Signal Blown
Purple
Granite Blue Sand Dune Forest Green Graphite
Bristol Blue Flame Red Aquamarine Onyx Black
Cream Claro Lagon Bianco Especial
Chene de Meymac
Gris Paloma
Charme d’Amboise
Please note that due to discrepancies with colour reproduction the shades depicted here may differ slightly from the finished product
Melamine
Ivory Spearmint Beech
email: [email protected] fax: +44 (0)1258 455056
How to Order
How to Order
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• All orders are required in writing, either by fax, email or post. Unfortunately we cannot accept orders over the phone• Orders should be submitted as an ‘official purchase order’ on company headed paper. All information should be clearly
displayed• Your order should contain the following - invoice address, delivery address, full contact details (name, phone & fax number)
item codes along with descriptions and prices• If applicable, please ensure our quote number is detailed on your order to ensure any agreed discounts are applied• Item codes and descriptions in this catalogue supersede all previous editions• A full price list can be requested from our website• Payments can be made by cheque, bank transfer or credit/debit card (with the exception of American Express)• If you are a new customer, the first three orders will be processed on a proforma basis, paid in full prior to manufacture &
delivery, after which a credit account may be applied for• For our terms and conditions refer to www.bristolmaid.com• For further information and assistance, please contact our customer services team on +44 (0) 1258 484455
How To Order
Bristol Maid™ has wide ranging experience in the facilitation and project management of tenders and contracts. Through many years’ experience we are uniquely placed to support our customers in the selection, delivery, installation and commissioning of both large and small projects.
To discuss your tender or contract requirements please contact our Customer Services Team.
• Site audit and equipment recommendations• Full project management• Scheduled deliveries• Product placement and removal of packaging• Installation and commissioning• Training
Tenders & Contracts
Bristol Maid™ products are designed and manufactured to meet the demands of everyday use, with the majority of our products under normal conditions providing many years of trouble free service.
Where annual maintenance or periodic inspections are required, we are able to offer comprehensive planned preventative maintenance through a scheduled service contract or call out by our own trained Engineers. For your peace of mind and continued product reliability, please contact our customer service team for details on the following services.
• Preventative maintenance contracts & packages• Supply of spare parts• Site audit and equipment recommendations
Preventative Maintenance, Spares & Service Support
Custom Design & Manufacture
If you have been unable to find a product that exactly meets your requirements, then please contact us so we can work together to develop a solution that will exactly match your needs. Our design capability allows us to provide everything from minor product specification changes through to a full design & development service.
Ian MillsSales Support EngineerSouth07921 [email protected]
Eric HornbySales Support EngineerNorth07702 [email protected]
Sales Support
email: [email protected] fax: +44 (0)1258 455056
Meet The Team
Steve Poller07711 [email protected]
Chris Farmer07768 [email protected]
Jeremy Russell07889 [email protected]
James Maplethorpe07887 [email protected]
John Baines07876 [email protected]
Tim Pascoe07725 [email protected]
National Sales Manager
Ian Farnfield01258 [email protected]
Sales Director
Sales Representatives
Paul OpenTechnical Services Manager01258 [email protected]
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
Meet The Team
Lauren AmosCustomer Service Team [email protected]
Sam NewtonAssistant Customer Service Team [email protected]
Mark ChampionCustomer Service [email protected]
Tracy JacksonCustomer Service [email protected]
Jo BarnwellCustomer Service [email protected]
Ben SpreadburyCustomer Service [email protected]
Chris MorganExport Sales Manager+44 (0)7917 [email protected]
Trudy ColeExport [email protected]
Customer Services
Export
Blandford Heights, Blandford Forum, Dorset. D11 7TG, UKTel: +44 (0) 1258 451338
Fax: +44 (0) 1258 455056
www.bristolmaid.com
Based in Blandford Forum, Dorset we design, manufacture and distribute the extensive range of Bristol Maid™ medical furniture together with other complimentary products from selected partners. With a broad portfolio and a comprehensive support team we are proud to provide a responsive and flexible service to meet our customer’s needs.
With over 60 years experience, the Bristol Maid™ brand has become synonymous with quality, durability and reliability, with a wide range of customers including the NHS, Private Healthcare Sector, Pharmacies and a growing network of Distributors throughout the UK, Ireland and many other countries around the world.
Working with our customers we are continually developing and enhancing our product ranges to ensure that they are fit for purpose, easy to use, reliable and above all represent value for money. We hope that you find this catalogue useful and welcome your suggestions on any improvements.
Welcome to the Latest Edition of the Bristol Maid™ Medical Furniture & Equipment Catalogue