STOCK CATALOG - Collins Walker, Inc."Our mission is to glorify God by working diligently, building...
Transcript of STOCK CATALOG - Collins Walker, Inc."Our mission is to glorify God by working diligently, building...
"Our mission is to glorify God by working
diligently, building relationships, striving
for superior customer service, with a
commitment to integrity"
COLLINS WALKER INC.
STOCK CATALOG
COLLINS WALKER INC
11370 ANAHEIM DR.
DALLAS, TX 75229
972-247-5433
*CALL FOR PRICING*
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
PLENUM SLOT DIFFUSER (5715I) …………………………………………………………………
ROUND CEILING DIFFUSER (RNR) ………………………………………………………………
SQUARE CEILING DIFFUSER (RNS) ……………………………………………………………..
ARCHITECTURAL CEILING DIFFUSER (UNI) ……………………………………………………
ALUMINUM SQUARE CEILING DIFFUSER (ARNS) ……………………………………………
PERFORATED CEILING DIFFUSER (4320) ……………………………………………………….
PERFORATED CEILING RETURNS (4360, 61PR, 4302) ……………………………………….
PATTERN CEILING DIFFUSER (6500) ………………………………………………………..…..
CURVED BLADE CEILING DIFFUSER (61C) ………………………………………………………
DOUBLE DEFLECTION SIDEWALL SUPPLY REGISTER (61DVO) …………………………..
LOUVERED RETURN AIR GRILLE / REGISTER (6145H) ………………………………………..
EGGCRATE RETURN GRILLES (51EC) ……………………………………………………………
FILTER GRILLES (51F) ………………………………………………………………………………
NON-VISION DOOR GRILLE (61DGD) ……………………………………………………………
WALL LOUVERS & BRICK VENT …………………………………………………………………..
SHEET METAL ADAPTERS ………………………………………………………………………..
GRILLE ACCESSORIES - DAMPERS, INSULATION, & PLASTER FRAMES …………..……
CABLE OPERATED DAMPERS ……………………………………………………………………..
CEILING RADIATION DAMPERS …………………………………………………………………..
FIRE DAMPERS ………………………………………………………………………………………
COMBINATION FIRE / SMOKE DAMPERS …………………………………………………………
FIRE DAMPER ACCESSORIES …………………………………………………………………….
ACCESS DOORS ………………………………………………………………………………………
VIBRATION ISOLATION …………………………………………………………………………….
ROOF SUPPORTS …………………………………………………………………………………….
SMOKE DETECTORS ………………………………………………………………………………..
CEILING EXHAUST FANS …………………………………………………………………………..
ROOFTOP EXHUAST FANS ………………………………………………………………………..
ROOF CURBS ……………………………………………………………………………………...…..
SINGLE DUCT VAV …………………………………………………………………………………..
SPIRAL DUCT AND FITTINGS ……………………………………………………………………..
DUCT HANGERS …………………………………………………………………………………..….
SNAPLOCK PIPE AND FITTINGS ………………………………………………………………..…
FLEX DUCT ……………………………………………………………………………………………
DUCT ACCESSORIES - SCREWS, DUCT SEAL, TAPE, AND TOOLS …………………………
MAP LOCATION ……………………………………………………………………………………… 50
47
TABLE OF CONTENTS
43
44 - 45
46
31
32
33 - 37
38 - 41
22 - 25
26
27
28 - 29
14
15
16
21
17
9
4
5
6
18
19
10
11
12
13
49
48
ITEM PAGE
3
20
30
42
7
8
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 4/17/2016
Page 3
MODEL : 5715I
* Slot diffusers with integral TB plenum
* Surface mount frame available
* Quiet and efficient
* Adjustable air pattern
* 1 1/2" slot
*Internally Insulated
* Flat black finished face with white center tee
Height = 11" Plaster Frame Recommended Ceiling Opening:
Width = Diffuser Width + 1/2" ; Length = Diffuser Length +1/4"
ADD FOR
MODEL SLOT LENGTH WIDTH INLET CFM RANGE PRICE S/M
FRAME
5715 124 23 5/8 8" 0 - 130
5715 136 35 5/8 8" 0 - 170
5715 148 47 5/8 8" 0 - 210
5715 160 59 5/8 10" Oval 0 - 260
5715 224 23 5/8 8" 0 - 180
5715 236 35 5/8 10" Oval 0 - 280
5715 248 47 5/8 12" Oval 0 - 400
5715 260 59 5/8 12" Oval 0 - 480
PLENUM SLOT DIFFUSER
1 2 1/2
2 5
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 4
MODEL : RNR
* Spun steel construction
* Three concentric cones
* Two horizontal discharge patterns
* Removable inner core
* Designed for exposed duct or hard ceilings
* White powder coat finish
NECK DIFFUSER 4250
SIZE PRICE RADIAL DAMPER
6" 11 5/8 1 1/8 1 3/4
8" 14 3/8 1 1/2 2 1/8
10" 17 15/16 2 1/8 2 7/8
12" 21 5/8 2 3/8 3 1/8
14" 25 1/4 2 5/8 3 3/8
Ceiling Opening B = Duct Diameter + 1/2"
ROUND CEILING DIFFUSER
DIMENSIONAL DATA (inches)
E1C E2
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 5
MODEL : RNS3
* Steel construction
* High performance 360 degree diffusion
* Square face
* Round neck
* Louvered 3-cone (standard) & 4-cone (available)
* Removable core
* White powder coat finish
PANEL ROUND DIFFUSER
SIZE NECK PRICE
6"
8"
10" 6"
12" 8"
14" 10"
6" 12"
8" 14"
10"
6"
8"
24 X 24
12 X 12
20 x 20
SQUARE CEILING DIFFUSER
4250
DAMPER
SURFACE MOUNT
FRAME
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 6
MODEL : UNI2
* Steel construction
* High performance
* Square plaque face
* Round neck
* Removable inner core
* 360 degree diffusion
* White powder coat finish
PANEL ROUND DIFFUSER
SIZE NECK PRICE
6"
8"
10" 6"
12" 8"
14" 10"
6" 12"
8" 14"
ARCHITECTURAL CEILING DIFFUSER
DAMPER
4250
SURFACE MOUNT
FRAME
24 X 24
12 X 12
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 7
MODEL : ARNS3
* Aluminum construction
* High performance
* Square face
* Round neck
* Louvered 3-cone diffuser
* 360 degree diffusion
* White powder coat finish
PANEL ROUND DIFFUSER
SIZE NECK PRICE
6" 6"
8" 8"
10" 10"
12" 12"
14" 14"
ALUMINUM SQUARE CEILING DIFFUSER
SURFACE MOUNT
FRAME
24 X 24
DAMPER
4250
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 8
MODEL : 4320
* Steel construction
* Adjustable discharge pattern
* 1, 2, 3, & 4 way pattern
* Flush face
* Round neck
* Removable face with spring latches
* White powder coat finish
SURFACE
ROUND DIFFUSER MOUNT
NECK PRICE FRAME
6"
8"
10"
12"
14"
6"
8"
10"
12"
14"
6"
8"12 X 12
20 X 20
PERFORATED CEILING DIFFUSER
PANEL
SIZE
24 X 24
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 9
MODELS : 4360 / 61PR / 4302
* Steel construction
* Lay-in frame / Surface mount / Panel only
* Flush face
* Round & square neck ( 4360 )
* Removable face ( 4360 )
* OBD available ( 61PR )
* White powder coat finish
SURFACE
MODEL FRAME PANEL NECK PRICE MOUNT
SIZE FRAME
24 X 24 22 X 22
24 X 12 22 X 10
12 X 12 10 X 10
48 X 24 46 X 22
6" 8"
24 X 24 10" 12"
14"
24 X 24 16"
8 X 8 6 X 6
10 X 10 8 X 8
12 X 12 10 X 10
14 X 14 12 X 12
26 X 14 24 X 12
26 X 26 24 X 24
12 X 12
24 X 12
20 X 20
24 X 24
48 X 24
N/A
N/A
L/I PANEL4302
61PR S / M
PERFORATED CEILING RETURNS
4360 LAY IN 12 X 12 6" 8"
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 10
MODEL : 6500
* Square neck
* Fixed pattern
* Removable core
* 4 way blow pattern
* Square to round adapters available
* OBD available
* White powder coat finish
NECK
SIZE
6 X 6
9 X 9
12 X 12
15 X 15
18 X 18
NECK
SIZE
6 X 6
9 X 9
12 X 12
15 X 15
18 X 18
PRICE
OBD
PRICE
DIFFUSER
PATTERN CEILING DIFFUSER
LAY IN T-BAR STYLE (24"x24")
DIFFUSER
PRICE
OBD
PRICE
SQUARE TO ROUND
SURFACE MOUNT STYLE
ADAPTER PRICE
SQUARE TO ROUND
ADAPTER PRICE
SURFACE MOUNTING
FRAME PRICE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 11
MODEL : 61C
* Steel construction
* Adjustable curved blades
* 1,2,3,4 & 2-way corner patterns
* 1 1/4" Border with 1" Flange
* White powder coat finish
SIZE 1-WAY / 2-WAY 3-WAY / 4-WAY OBD
(W X H) CORNER** ADD
6 X 6
8 X 4
8 X 6
8 X 8
10 X 6
10 X 8
10 X 10
12 X 6
12 X 8
12 X 12
14 X 6
14 X 8
14 X 14
16 X 6
16 X 8
18 X 6
18 X 8
** Corner Blow in square sizes only
CURVED BLADE CEILING SUPPLY GRILLE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 12
MODEL : 61DV-O
* Steel construction
* Double deflection
* Adjustable vertical front blades
* Adjustable horizontal rear blades
* Opposed blade damper
* Face size 1-3/4" larger than neck size listed
* White powder coat finish
SIZE PRICE SIZE PRICE SIZE PRICE
(W X H) (W X H) (W X H)
6 X 4 14 X 14 24 X 4
6 X 6 16 X 4 24 X 6
8 X 4 16 X 6 24 X 8
8 X 6 16 X 8 24 X 10
8 X 8 16 X 10 24 X 12
10 X 4 16 X 16 24 X 14
10 X 6 18 X 4 24 X 16
10 X 8 18 X 6 30 X 6
10 X 10 18 X 8 30 X 8
12 X 4 18 X 10 30 X 10
12 X 5 18 X 12 30 X 12
12 X 6 18 X 14 30 X 14
12 X 8 18 X 16 30 X 16
12 X 10 20 X 4 36 X 6
12 X 12 20 X 6 36 X 8
14 X 4 20 X 8 36 X 10
14 X 5 20 X 10 36 X 12
14 X 6 20 X 12 36 X 14
14 X 8 22 X 6 36 X 16
14 X 10 22 X 10
DOUBLE DEFLECTION SIDEWALL SUPPLY REGISTER
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 13
MODEL : 6145H
* Steel construction
* Horizontal fixed deflection vanes
* Opposed blade damper available for some sizes
* Face size 1-3/4" larger that neck size listed
* White powder coat finish
SIZE SIZE SIZE
( W X H) PRICE ( W X H) PRICE ( W X H) PRICE
6 X 4 18 X 14 30 X 14
6 X 6 18 X 16 30 X 16
8 X 4 18 X 18 30 X 18
8 X 6 18 X 30 30 X 24
8 X 8 18 X 36 30 X 30
10 X 6 20 X 6 36 X 6
10 X 8 20 X 8 36 X 8
10 X 10 20 X 10 36 X 10
12 X 6 20 X 12 36 X 12
12 X 8 20 X 14 36 X 14
12 X 10 20 X 20 36 X 16
12 X 12 20 X 25 36 X 18
12 X 24 24 X 6 36 X 24
14 X 6 24 X 8 36 X 36
14 X 8 24 X 10 48 X 24
14 X 10 24 X 12 48 X 30
14 X 12 24 X 14 48 X 36
14 X 14 24 X 16
16 X 6 24 X 18
16 X 8 24 X 24
16 X 10 24 X 30
16 X 12 24 X 36
16 X 14 24 X 48 SIZE
16 X 16 25 X 20 (W X H) PRICE
18 X 6 30 X 6 10* X 10*
18 X 8 30 X 8 22* X 10*
18 X 10 30 X 10 22* X 22*
18 X 12 30 X 12 46* X 22*
SIDEWALL RETURN AIR GRILLE
LAY-IN GRILLES
(NO SCREW HOLES)
*add 2" for ceiling module size
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 14
MODEL : 51ECL / 51ECS / ECC
* Available in lay-in / Surface mount / Core only
* Aluminum core / Aluminum frame (51ECL 51ECS)
* Plastic core only, available in white
MODEL FRAME NECK PANEL CORE DIM. PRICE NOTE
10 X 10 12 X 12 LAY-IN
22 X 10 24 X 12 LAY-IN
22 X 22 24 X 24 LAY-IN
46 X 22 48 X 24 LAY-IN
6 X 6 8 X 8 SCREW HOLES
8 X 8 10 X 10 SCREW HOLES
10 X 10 12 X 12 SCREW HOLES
12 X 12 14 X 14 SCREW HOLES
24 X 12 26 X 14 SCREW HOLES
24 X 24 26 X 26 SCREW HOLES
48 X 24 50 X 26 SCREW HOLES
22 X 10 24 X 12 LAY-IN
22 X 22 24 X 24 LAY-IN
24 X 12 PLASTIC CORE
24 X 24 PLASTIC CORE
48 X 24 PLASTIC CORE
EGGCRATE RETURN GRILLES
L/I
S/M
51ECL
51ECS
1/2"X1/2"X1/2"
1/2"X1/2"X1/2"
Core Only N/A 1/2"X1/2"X1/2"ECC-P
1/2"X1/2"X1"L/I51ECLCB
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 15
* Aluminum construction
* Horizontal blade / Eggcrate / Perforated face
* Frames for 1" filters
* Lay-in / Surface mount
* Knurled knob / Latch fasteners
* White powder coat finish
NECK FACE
SIZE SIZE MODEL TYPE PRICE
12 X 12 Neck + 1 3/4
24 X 12 Neck + 1 3/4 Louvered Face
24 X 24 Neck + 1 3/4 Surface Mount
48 X 24 Neck + 1 3/4
20 X 8 24 X 12
20 X 20 24 X 24
44 X 20 48 X 24
20 X 20 24 X 24
44 X 20 48 X 24
20 X 20 24 X 24
44 X 20 48 X 24
FILTER GRILLES
51FPL
Louvered Face Lay-in
Eggcrate Face Lay-in
Perforated Face Lay-in
51FB45-S
51FB45-L
51FEL
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 16
MODEL : 61DGD
* Steel Construction
* Double flange frame
* 1 1/4" margin
* Adjusts to door thickness 1 3/8" to 2"
* Completely sight proof
* 90 degree inverted "V" louver on 1/2" centers
* Architecturally pleasing & unabtrusive
* White powder coat finish
SIZE PRICE
12 X 12
18 X 12
24 X 12
16 X 16
18 X 18
24 X 18
24 X 24
NON-VISION DOOR GRILLE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 17
Louver Model : 1602D
* Aluminum construction
* 2" deep drainalbe blades
* 1 1/2" flange
* Birdscreen
SIZE PRICE
12 X 12
Louver Model : 1604D
* Aluminum construction
* 4" deep drainable blades
* 1 1/2" flange frame
* Birdscreen
SIZE PRICE
12 X 12
18 X 12
24 X 12
16 X 16
18 X 18
24 X 18
24 X 24
36 X 24
Brick Vent Model : 157-FL
* Aluminum construction
* 1 1/2" deep
* 1" flange
* 15 5/8" x 7 3/4" (16 x 8 opening)
SIZE PRICE
16 X 8
WALL LOUVERS & BRICK VENTS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 18
MODEL SIZE PRICE
6 RRA 4 6" TO 4"
6 RRA 5 6" TO 5"
8 RRA 6 8" TO 6"
8 RRA 7 8" TO 7"
10 RRA 8 10" TO 8"
10 RRA 9 10" TO 9"
12 RRA 8 12" TO 8"
12 RRA 10 12" TO 10"
14 RRA 12 14" TO 12"
15 RRA 14 15" TO 14"
16 RRA 14 16" TO 14"
16 RRA 15 16" TO 15"
MODEL SIZE PRICE
6X6 SRA 6 6X6 TO 6"
8X8 SRA 6 8X8 TO 6"
8X8 SRA 8 8X8 TO 8"
9X9 SRA 8 9X9 TO 8"
9X9 SRA 9 9X9 TO 9"
10X10 SRA 6 10X10 TO 6"
10X10 SRA 8 10X10 TO 8"
10X10 SRA 10 10X10 TO 10"
12X12 SRA 6 12X12 TO 6"
12X12 SRA 8 12X12 TO 8"
12X12 SRA 10 12X12 TO 10"
12X12 SRA 12 12X12 TO 12"
15X15 SRA 12 15X15 TO 12"
15X15 SRA 14 15X15 TO 14"
15X15 SRA 15 15X15 TO 15"
18X18 SRA 12 15X15 TO 15"
18X18 SRA 14 18X18 TO 14"
18X18 SRA 16 18X18 TO 16"
18X18 SRA 18 18X18 TO 18"
20X20 SRA 12 20X20 TO 12"
20X20 SRA 14 20X20 TO 14"
20X20 SRA 16 20X20 TO 16"
20X20 SRA 18 20X20 TO 18"
20X20 SRA 20 20X20 TO 20"
22X10 SRA 6 22X10 TO 6"
22X10 SRA 8 22X10 TO 8"
22X10 SRA 10 22X10 TO 10"
22X22 SRA 6 22X22 TO 6"
22X22 SRA 8 22X22 TO 8"
22X22 SRA 10 22X22 TO 10"
22X22 SRA 12 22X22 TO 12"
22X22 SRA 14 22X22 TO 14"
22X22 SRA 16 22X22 TO 16"
22X22 SRA 18 22X22 TO 18"
22X22 SRA 20 22X22 TO 20"
24X12 SRA 6 24X12 TO 6"
24X12 SRA 8 24X12 TO 8"
24X12 SRA 10 24X12 TO 10"
24X12 SRA 12 24X12 TO 12"
SHEET METAL ADAPTERS
Round to Round Reducing ( RRA )
Square to Round Reducers ( SRA )
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 19
OPPOSED BLADE DAMPERS FOR DIFFUSERS & GRILLES
Model : OBD
* Steel construction / Gang operated opposed blade dampers
* Clips to mount to grille or diffuser
SIZE PRICE SIZE PRICE SIZE PRICE
6 X 4 12 X 6 18 X 6
8 X 4 12 X 8 18 X 8
6 X 6 12 X 12 18 X 12
8 X 6 14 X 6 18 X 18
8 X 8 14 X 8 22 X 10
9 X 9 14 X 14 22 X 22
10 X 6 15 X 15 24 X 12
10 X 8 16 X 6 24 X 24
10 X 10 16 X 8
RADIAL SLIDING DAMPER
Model : 4250
* Steel construction / Cost efficient volume control NECK SIZE
* Mounts directly to diffuser collar 6"
8"
10"
12"
14"
MOLDED INSULATION BLANKETModel : MIB SIZE
* Fits 24x24 round neck diffusers * R-6 24 x 24
DUCTBOARD BACK
Model : DBB SIZE
* Fits 22x22 square neck grilles * 6" high (I.D.) 24 x 24
AUXILARY FRAMES
Models : DFA
* Hard ceiling frames for plaster and sheetrock ceilings
MODEL SIZE PRICE
4824 DFA 48 X 24
2424 DFA 24 X 24
2412 DFA 24 X 12
1212 DFA 12 X 12
2020 DFA 20 X 20
GRILLE & DIFFUSER ACCESSORIES
PRICE
PRICE
PRICE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 20
Models : CABLE OPERATED DAMPER
* 6"-10" 24 gauge galvanized steel
* 12"-14" 20 gauge galvanized steel
* Multiple cable lengths and controllers
SIZE PRICE
6"
8"
10"
12"
14"
SIZE PRICE
10 FT
5 FT
3 FT
SIZE PRICE
CEILING CUP
PLENUM MOUNT
CABLES
CONTROLLERS
CABLE OPERATED DAMPERS
CABLE OPERATED DAMPER
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 21
Models : 0722 Round
* 22 gauge galvanized steel
* UL Listed with fusible link ( 212 degree F standard )
* Fire blanket accessory 0725 available for 0722
SIZE PRICE
6"
7"
8"
10"
12"
14"
SIZE PRICE
24 X 24
24 X 12
12 X 12
FIRE BLANKET - 0725
CEILING RADIATION DAMPERS
ROUND NECK - 0722
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 22
MODEL : 0110H
* Galvanized steel construction
* Horizontal / vertical
* 1 1/2 hour UL labeled
* For use in 2 hour fire seperations or less
* Spring loaded damper blades
* Type A - blades in airstream
SIZE PRICE SIZE PRICE SIZE PRICE
(W X H) (W X H) (W X H)
6 X 6 30 X 8 14 X 14
8 X 6 36 X 8 16 X 14
10 X 6 10 X 10 18 X 14
12 X 6 12 X 10 20 X 14
14 X 6 14 X 10 24 X 14
16 X 6 16 X 10 16 X 16
18 X 6 18 X 10 18 X 16
20 X 6 20 X 10 20 X 16
24 X 6 22 X 10 24 X 16
30 X 6 24 X 10 18 X 18
36 X 6 30 X 10 20 X 18
8 X 8 36 X 10 24 X 18
10 X 8 12 X 12 30 X 18
12 X 8 14 X 12 36 X 18
14 X 8 16 X 12 20 X 20
16 X 8 18 X 12 24 X 20
18 X 8 20 X 12 22 X 22
20 X 8 24 X 12 24 X 24
24 X 8 30 X 12 30 X 24
36 X 12 36 X 24
FIRE DAMPERS - RECTANGULAR NO SLEEVE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 23
MODEL : 0114-12H
* Galvanized steel construction
* 12" Integral sleeve with mounting angles
* Horizontal / vertical
* 1 1/2 hour UL labeled
* For use in 2 hour fire seperations or less
* Spring loaded damper blades
* Type A - blades in airstream
SIZE PRICE SIZE PRICE SIZE PRICE
(W X H) (W X H) (W X H)
6 X 6 30 X 8 14 X 14
8 X 6 36 X 8 16 X 14
10 X 6 10 X 10 18 X 14
12 X 6 12 X 10 20 X 14
14 X 6 14 X 10 24 X 14
16 X 6 16 X 10 16 X 16
18 X 6 18 X 10 18 X 16
20 X 6 20 X 10 20 X 16
24 X 6 22 X 10 24 X 16
30 X 6 24 X 10 18 X 18
36 X 6 30 X 10 20 X 18
8 X 8 36 X 10 24 X 18
10 X 8 12 X 12 30 X 18
12 X 8 14 X 12 36 X 18
14 X 8 16 X 12 20 X 20
16 X 8 18 X 12 24 X 20
18 X 8 20 X 12 22 X 22
20 X 8 24 X 12 24 X 24
24 X 8 30 X 12 30 X 24
36 X 12 36 X 24
FIRE DAMPERS - RECTANGULAR WITH SLEEVE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 24
MODEL : 0130H
* Galvanized steel construction
* Round duct transitions
* Horizontal / vertical
* 1 1/2 hour UL labeled
* For use in 2 hour fire seperations or less
* Spring loaded damper blades
* Type C - 100% free area
SIZE
( D )
6"
8"
10"
12"
14"
16"
18"
FIRE DAMPERS - ROUND DUCT NO SLEEVE
PRICE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 25
MODEL : 0134-12H
* Galvanized steel construction
* Round duct transitions
* 12" Integral sleeve with mounting angles
* Horizontal / vertical
* 1 1/2 hour UL labeled
* For use in 2 hour fire seperations or less
* Spring loaded damper blades
* Type C - 100% free area
SIZE
( D )
6"
8"
10"
12"
14"
16"
18"
FIRE DAMPERS - ROUND DUCT WITH SLEEVE
PRICE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 26
MODEL : 1271
* Galvanized steel construction
* For use in fire and smoke control systems
* UL Listed - Meets UL555
* 16" - 20 guage sleeve and angles
* Available with 120 volt or 24 volt actuator
* Square to round adapters available for
Round pipe aplications
SIZE PRICE
8 X 8
12 X 12
18 X 18
24 X 12
24 X 24
COMBINATION FIRE / SMOKE DAMPER
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 27
MODEL FUSE DEGREE PRICE
165 Link 165 Degrees
212 Link 212 Degrees
286 Link 286 Degrees
MODEL LABLE PRICE
FD FIRE LABLE FIRE DAMPER
FD SMOKE LABLE FIRE / SMOKE DAMPER
* Mark inspection doors and access panels* White background & florescent red lettering* Size 3" x 1.5"
FIRE / SMOKE FIRE
DAMPER DAMPER
MODEL DESCRIPTION PRICE
Honeywell MS4104F10 120 Volt Replacement
Honeywell MS8104F10 24 Volt Replacement
Belimo FSLF120 120 Volt Replacement
Belimo FSLF24 24 Volt Replacement
* Two position, Power open, Spring closed, Both right & left hand drive compatable
* Can be used on dampers 6 square feet and less
* Larger motors available by special order
ELECTRIC ACTUATORS FOR CONTROL DAMPERS &
COMBINATION FIRE / SMOKE DAMPERS
FIRE DAMPER - FIRE / SMOKE DAMPER ACCESSORIES
REPLACEMENT FUSE LINKS
ACCESS DOOR LABLES
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 28
FIRE RATED ACCESS PANEL
Model : BIT - K
* Steel construction and prime coat
* UL Listed 1 1/2 hour rated for 2 hour fire walls
* Full length hinges and constant force closure springs
SIZE PRICE
12 X 12
16 X 16
18 X 18
24 X 24
ALL PURPOSE ACCESS PANEL
Model : BNT-C
* Steel construction and prime coat
* For drywall, plastered and masonry surfaces
* Full length hinges and screwdriver cam latch
SIZE PRICE
8 X 8
12 X 12
14 X 14
16 X 16
18 X 18
24 X 24
ALL PURPOSE STAINLESS STEEL ACCESS PANELModel : BNT - C - SS
* All stainless steel construction version of CNT - C
SIZE PRICE
8 X 8
12 X 12
16 X 16
18 X 18
24 X 24
ACCESS DOOR PRODUCTS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 29
RECTANGULAR DUCT ACCESS DOOR
Model : HAD
* Double wall galvanized steel construction
* 1" thick insulated, dual gasketing
* Peening method installation
* Full length hinge and cammed operated latch
SIZE PRICE
6 X 6
8 X 8
10 X 10
12 X 12
14 X 14
16 X 16
18 X 18
24 X 24
ROUND DUCT ACCESS DOORModel : RAD
* 22 guage galvanized steel construction
* Insulated
* Gasketed - 20" w.g.
* Door size = (6", 8", 10") 8 x 4 oval / (Other Sizes) 12 x 8 oval
* Easy installation and easy access
DUCT DIAMETER PRICE
6"
8"
10"
12"
14"
16"
18"
20"-24"
DUCT ACCESS DOOR PRODUCTS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 30
MODEL PRICE
VIHSS021
VIHSS022
VIHSF044
VIHSS024
VIHSA124
* Spring elements color-coded for easy field verification
* Load distribution steel washer
ALL PURPOSE HANGER MOUNT
MODEL PRICE
VIAPHA1
VIAPHA2
* Element incorporates projected collar to prevent metal to metal contact between rod and bracket.
* Embedded steel plates on top of element for uniform loading.
* Oil + water resistant element
NEO-SPRING HANGER
MODEL PRICE
VIHSNF-HM044
* Oil + water resistant rubber element
* Rubber element incorporates projected collar to prevent
metal to metal contact between rod and bracket.
RUBBER FOAM PAD MODEL PRICE
VIRFP030301
VIRFP060601
* Material: Closed cell, chemically cross-linked high density rubber foam.
* Maximum loading: 70 lbs/sq.in.
* Working range: 15 to 60 lbs/sq.in.
VIBRATION ISOLATION
SPRING ISOLATORS SIZE
SIZE
SIZE
25 LB HANGING SPRING
44 LB HANGING SPRING
90 LB HANGING SPRING
125 LB HANGING SPRING
173 LB HANGING SPRING
95 LB HANGING RUBBER
3" X 3" X 1" VIBRATION PAD GREEN
6" X 6" X 1" VIBRATION PAD GREEN
SIZE
120 LB HANGING RUBBER
100 LB NEO-SPRING HANGER
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 31
PRICE
* Accommodates standard 1-5/8” strut
* UV stabilized for long lasting support.
* USA Standard ASTMF F 1292-99.
* Support a load of 100 lbs per block
* Multiple blocks can be combined for
greater weight dispersion.
ECOFOOT QUICK FRAME - H FRAME *strut not included
PRICE
Each kit includes:
(2) Injection moulded feet
(2) Anti-vibration mats
(2) Strut base caps
(2) 90º strut brackets
(4) Spring nuts
(4) 1/2’ bolts
* Accommodates standard 1/2” threaded rod, or 1-5/8” strut
* Customize required support on site
* Keeps the roofing membrane safe and decking/insulation
below free of damage.
1/2" FIXING BOLT W/ PLATE
DESCRIPTION
DESCRIPTION
18" X 18" H FRAME
ROOF SUPPORTS
RAW RUBBER BLOCK *strut not included
8" RUBBER BLOCK
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 32
* Universal voltage model
115 VAC
24 VAC
24 VDC
* Ionization detector head (photoelectric
detector available)
* (2) Form "C" contacts and (1) trouble contact
* Visual indicators
* Manual test / reset switch
* Dual tube air sampling
* Duck mount template and screws
* UL 268A Listed
* Factory tube alignment
* Rugged steel back box with see-thru plastic cover
* Built-in power supply
* Less labor intensive
MODEL DESCRIPTION PRICE
ION-2650 Universal ION Duct Detector
ST - 30 30" Sample Tube
ST - 60 48" Sample Tube
ST - 120 72" Sample Tube
536 Remote Alarm LED, Test / Reset Switch
543 Remote Alarm LED, Pilot LED, with Horn
544 Remote Alarm Horn, LED, Keyed Test / Reset
FIREX DUCT SMOKE DETECTORS
"Worth Asking For"
Additional accessories available by special order( see below )
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 33
ZEPHYR CEILING EXHAUST FANS
PRICE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 34
MODEL PRICE
Z3H
Z5H
Z6 S/H
Z8 S/H
Z10 S/H
Z12S
Z12H
ZEPHYR CEILING EXHAUST FANS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 35
NS*
NS*
NS*
NS*
NS*
NS*
NS*
NS*
NS*
NS*
(NS*) = NON-STOCKED MODEL
ZEPHYR & ZEPHYR INLINE PERFORMANCE DATA
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 36
MODEL DESCRIPTION PRICE
Z1 ZT Z3H Z5H Z8 Z10 Z12 S Z12 H
ZJ1 Z6 H
LT 30 * * * *
LT 40 *
LT 50 * *
WCF 08 8" Aluminum Flashed Capf * * *
WCF 12 12" Aluminum Flashed Cap *
WCC 08 8" Aluminum Curb Cap * * *
WCC 12 12" Aluminum Curb Cap *
WC 10 3-1/4 X 10 * *
RWC 04 4" Aluminum *
RWC 06 6" Aluminum * *
RWC 08 8" Galvanized * *
RWC 10 10" Galvanized
RWC 12 12" Galvanized *
56337MM 3-1/4 X 10 TO 6" * *
56340MM 6 X 8 TO 8" * *
56341MM 6 X 8 TO 6" * *
56385MM 22 X 6 TO 12" *
20722 TDA 3, 5, 6 *
20723 TDA 8, 81 *
20724 TDA 10 *
20725 TDA 12, 101, 102, 121 * *
WALL CAPS
IN-LINE ADAPTER KITS
DUCT TRANSITIONS
ZEPHYR ACCESSORY GUIDE
ZEPHYR MODEL
SPEED CONTROLS
ROOF CAPS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 37
SQUARE TO ROUND TRANSITION TDA INLINE ADAPTER
Fan Model Fan Outlet Round Dia. X Y
ZT, ZJ1, Z3, Z5, Z6 3 1/4 x 10 6" 10 6
Z8, Z10 8 x 6 6" or 8" 10 8
Z12 22 x 6 12" 14 10
20 10
WALL CAP
WC 10
FLASHED ROOF CAP CURB MOUNTED CAP
MODEL A (THROAT) B C E SQ F H L-DIA
WCF08 9 N/A 5 1/2 21 1/4 8 13 1/2 18 1/2
WCF12 13 N/A 7 24 10 17 25
WCC08 9 1 1/2 5 1/2 18 1/2 4 11 18 1/2
WCC12 13 2 7 20 1/2 4 13 25
Z10
Z12
ZEPHYR ACCESSORY GUIDE
Fan Model
Z3, Z5, Z6
Z8
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 38
PENN BARRY MODEL : DX-B
* Heavy gauge aluminum construction
* Non over-loading aluminum impellers
* Belts are static free, heat resistant, and oil resistant
* Prelubricated Bearings, duplex split pillow block
* Factory wired NEC, NBFU, and U.L.
* Continious duty, open drip proof, single speed motors
* Negative pressure motor colling system
* Disconnect switch
* Birdscreen
HP
DAMPER
PRICE
DX 08 B
FAN
MODEL
115/1/60
1/4 115/1/60
15.75 X 15.75
15.75 X 15.75
19 X 19
23 X 23
1/4
BELT DRIVE ROOFTOP EXHAUST FAN
ROOF CURB
DX 14 B
SIZE VOLTAGE
MOTOR
SIZE
1/4 115/1/6011.25 X 11.25
PRICE
DX 11 B
17 X 17
PRICE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 39
Sone BHP Sone BHP Sone BHP Sone BHP Sone BHP BHP Sone BHP Sone BHP Sone
3.4 .02 2.7 .02
3.8 .03 3.1 .03
4.3 .03 3.5 .04 3.0 .03
4.6 .04 3.9 .04 3.3 .04
5.0 .05 4.2 .05 3.6 .05
5.5 .06 4.7 .06 4.0 .06 3.6 .05
6.0 .07 5.2 .07 4.5 .07 4.0 .07
4.9 .05 4.3 .06 3.6 .06
5.1 .06 4.6 .07 3.9 .07
5.5 .07 4.9 .07 4.3 .08
5.8 .07 5.3 .08 4.7 .09 4.1 .05
6.6 .09 6.1 .10 5.5 .10 5.0 .10
6.8 .10 6.3 .10 5.7 .11 5.2 .11
7.0 .11 6.5 .11 5.9 .12 5.4 .12
7.8 .13 7.2 .13 6.5 .14 6.0 .15 5.7 .13
8.5 .15 7.9 .16 7.3 .16 6.7 .17 6.3 .17
9.2 .17 8.7 .18 8.0 .19 7.3 .20 7.0 .20 6.8 .18
7.3 .08 6.7 .09 6.0 .09
9.7 .15 9.0 .17 8.3 .18 7.4 .18 6.3 .17
10.7 .19 10.1 .21 9.5 .22 8.8 .23 7.6 .22 6.9 .18
11.8 .23 11.2 .24 10.6 .26 10.0 .26 8.8 .26 7.6 .25
BELT DRIVE ROOFTOP EXHAUST FAN
DX08B
DX11B
DX14B
8422290 2077
9582606 2415 2226 1977 1699 1355
6801849 1582 1212
1835 1522 1104
10001724 1596 1451 1282 1080 706
9501638 1502 1347 1159 884
1465 1312 1126
9001552 1407 1238 1028 665
CFM vs. Static Pressure (in.wg)
880
530 393835
505655
700
644
RPM
609790
745
540
574
PERFORMANCE DATA
399
.750
444
351
330
247
.000 .125 .250
678 271 446 207
487
.375 .875.500 .625
925713 611 329496
6751164 959 638
7001207 1011 737
7251250 1062 813
252
1793 1495 831
874
7501293 1113 880
9102475 2276 2070
8251422 1263 1067 775
672800
1379 1213 1007
850
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 40
PENN BARRY MODEL : DX-D
* Heavy gauge aluminum construction
* Aluminum impellers
* Heavy duty yet lightweight design
* Motor compartment utilizes fan forced cooling system
* Multi-speed motor with thermal overload protection
* Speed controller included for high speed motor
* Factory wired polarized disconnect plug
* Birdscreen
HP
TIP
CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone
1/25 1300 3361 385 3.9 316 3.5 257 4.8 207 5.1 168 5.2 129 5.6
1/12 1550 4007 559 6.1 501 5.9 446 6.1 394 6.5 338 6.8 267 7.0
1/25 1050 3058 388 1.8 223 2.2 148 3.1 112 3.7 80 4.5 49 5.3
1/11 1300 3786 503 3.4 397 3.6 320 4.3 262 5.0 201 5.5 149 6.0
1/7 1550 4514 736 6.7 659 6.4 577 6.6 502 6.9 432 7.6 356 7.9
1/6 1050 3788 1738 9.9 1489 8 1256 6.6 1032 6.1 884 6.6 772 7.1
1/3 1300 4690 2021 12 1822 10.6 1637 9.5 1428 8.7 1256 8.4 1094 8.5
1/2 1550 5592 2348 13.8 2176 12.8 2014 12 1853 11.3 1685 10.7 1532 10.4
** Do not use speed controllers on low speed (V) or medium Speed(S); Only on High Speed (R)
MOTORROOF CURB
574
1/12
1/7
VOLTAGESIZE
115/1/60
MAX
WATTS
DX16R
DX16V
DX16S
453
510
82
.250" .375"
17 X 17
SPD. .500".000"
15.75 X 15.75
DX10S
1/219 X 19
.625"
PERFORMANCE DATA
CFM vs. Static Pressure
HP RPMMODEL
FAN
.125"
DX 16R
17 X 17
DIRECT DRIVE ROOFTOP EXHAUST FAN
MODEL
115/1/60
115/1/60
FAN
DX 10R 11.25 X 11.25
DAMPER
SIZE PRICE PRICE
DX 11R 11.25 X 11.25
PRICE
DX10R
DX11V
DX11S
DX11R
121
111
142
201
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 41
DX10R 20 7/8 DX11R
13 3/8 13 3/8
DX16VSR DX08B
DX11B DX14B
ROOFTOP EXHAUST FAN DIMESIONAL DATA
20 7/8
18 1/2 x 18 1/2 18 1/2 x 18 1/2
28 1/2
22 1/2
20 1/2 X 20 1/2
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 42
MODEL : RF CURB
* 18 Guage galvanized steel
* All welded construction
* 14 height
* Insulated
* 1 5/8" wood nailer
J K N M H
C27 27 X 27 X 14 33.5 27 22.5 19.5 14
C23 23 X 23 X 14 30.5 23 19.5 16.5 14
C19 19 X 19 X 14 27.5 19 16.5 13.5 14
C17 17 X 17 X 14 22.5 17 11.5 8.5 14
FLAT ROOF CURBS
MODEL SIZE (O.D.) PRICE
DIMENSIONS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 43
MODEL : D3001 / P3001
* LineaCross multi-point averaging inlet sensor
* No controls ( D3001 )
* Pneumatic control ( P3001 )
* Slip and drive duct connections
* Controls enclosure ( D3001 )
* 120/24v transformer (D3001)
* Toggle disconnect (D3001)
MODEL LMHS-P
UNIT CFM WIDTH HEIGHT WITH SENSOR AND
SIZE RANGE (W) (H) 3011 PNEUMATIC
CONTROLLER
6 0 - 450 10 10
8 0 - 900 12 12 1/2
10 0 - 1500 14 12 1/2
12 0 - 2050 18 12 1/2
14 0 - 2550 24 12 1/2
16 0 - 3040 28 12 1/2
(BOX W/ SENSOR ONLY)
NO CONTROLS
SINGLE DUCT VAV
PRICEDIMENSIONS (INCHES)
MODEL LMHS-D
(PNEUMATIC)
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 44
SPIRAL DUCT AND FITTINGS
* Slip Fittings
* SMACNA Gauges
SESP SEE90 SEE45 SECPL SEBTO SEPLUG SEDPR**
DIAMETER10' SPIRAL
DUCT90° ELBOW 45° ELBOW COUPLING TAKE-OFF PLUG
MANUAL
DAMPER
4"
5" NS NS
6"
8"
10"
12"
14"
16"
18"
20"
22" NS
24" NS
26" * NS NS NS NS NS NS
28" * NS NS NS NS NS NS
30" * NS NS NS NS NS NS
**With 2" stand off
DIAMETER 90° ELBOW 45° ELBOW
6"
8"
10"
12"
SPIRAL DUCT AND FITTINGS
*LONG RADIUS STANDARD
*Sizes not stocked, but fabricated in house
SHORT RADIUS 90° LONG RADIUS 90°Short Radius Elbows
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 45
SPIRAL DUCT AND FITTINGS (CONT.)
SESR
4" TAP 8" BODY 12" TAP 12" BODY SPUN REDUCER 6" TO 4"
4" TAP 10" BODY 12" TAP 16" BODY SPUN REDUCER 8" TO 6"
4" TAP 12" BODY 12" TAP 18/22" BODY SPUN REDUCER 10" TO 6"
6" TAP 6" BODY 12" TAP 24" BODY SPUN REDUCER 10" TO 8"
6" TAP 8" BODY 14" TAP 14" BODY SPUN REDUCER 12" TO 8"
6" TAP 10" BODY 14" TAP 16" BODY SPUN REDUCER 12" TO 10"
6" TAP 12" BODY 14" TAP 18" BODY SPUN REDUCER 14" TO 10"
6" TAP 14/18" BODY 14" TAP 20" BODY SPUN REDUCER 14" TO 12"
6" TAP 20/24" BODY 14" TAP 22/24" BODY SPUN REDUCER 16" TO 12"
8" TAP 8" BODY 16" TAP 16" BODY SPUN REDUCER 16" TO 14"
8" TAP 10" BODY 16" TAP 18/20" BODY SPUN REDUCER 18" TO 14"
8" TAP 12" BODY 16" TAP 22/24" BODY SPUN REDUCER 18" TO 16"
8" TAP 14/16" BODY 18" TAP 18" BODY SPUN REDUCER 20" TO 16"
8" TAP 18/20" BODY 18" TAP 20" BODY SPUN REDUCER 20" TO 18"
8" TAP 22/24" BODY 18" TAP 22/24" BODY SPUN REDUCER 22" TO 12"
10" TAP 10" BODY 20" TAP 20" BODY SPUN REDUCER 22" TO 18"
10" TAP 12" BODY 20" TAP 22/24" BODY SPUN REDUCER 22" TO 20"
10" TAP 14/16" BODY 22" TAP 22/24" BODY SPUN REDUCER 24" TO 20"
10" TAP 18/20" BODY 24" TAP 24" BODY SPUN REDUCER 24" TO 22"
10" TAP 22/24" BODY
DUCT MOUNTED REGISTERS
* Supply/return register with adjustable double deflection blades and a volume damper/extractor.
* Mounting directly on spiral duct
* Register taps are not required
13" X 3"
13" X 6"
17" X 3"
17" X 6"
21" X 6"
SPIRAL DUCT AND FITTINGS CONT.
SADDLE TAPS
SEST
SPUN REDUCERS
MODEL: RGS
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 46
PRICE (EA)
#2 LOOP HANGER CABLE - 10'
#2 LOOP HANGER CABLE - 15'
#2 LOOP HANGER SQ DUCT - 10'
#2 LOOP HANGER STRUT - 15'
#2 LOOP HANGER BARREL END - 10'
* #2 CABLE - 100LBS #3 CABLE - 200LBS
* Faster to install than traditional hanging systems
* Versatile #3 LOOP HANGER CABLE - 10'
* Simple to use #3 LOOP HANGER CABLE - 15'
* Strong, safe and industry approved #3 LOOP HANGER 3/8 THREADED - 15'
* Aesthetically discreet and lightweight
SINGLE POINT DUCT HANGERS
* For suspension of circular ducting SIZE PRICE
* Single point to hang duct using all-thread 8"
10"
12"
14"
16"
18"
20"
22"
24"
HANGING STRAP PRICE
* For low pressure/flex duct
* 30ga. steel; Rolls of 100' 100' OF 1.5" HANGING STRAP 30GA
DESCRIPTION
#2 GRIPPLE LOCK
DUCT HANGERS
GRIPPLE
#3 GRIPPLE LOCK
SIZE
100' OF 1" HANGING STRAP 30GA
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 47
SNAP LOCK PIPE AND FITTINGS
* Standard and SMACNA gauges available
* All pipe 12" and above and all elbows 10" and above are SMACNA gauges
* Many other taps and fittings available by special order
LPAELB LPFS LPSPIN LPFSD
DIAMETER5' SNAP
LOCK PIPE
3' SNAP
LOCK PIPE
ADJ.
ELBOW
FINGER SAVER
D/B COLLAR
SPIN IN
COLLAR
DAMPER
BLADE
4" NS NA NS NS
6" NA
8" NA
10" NA
12" NA
14" NA
16" NA NS
18" NA NS
20" NA NS NS
LPSLP
SMACNA
LPAELB
SMACNA
DIAMETER5' SNAP
LOCK PIPE
ADJ.
ELBOWPRICE
6"
8"
10"
14" X 12" X 12"
LPWYE
WYE
6" X 4" X 4"
8" X 6" X 6"
LPSLP
SNAP LOCK PIPE AND FITTINGS
10" X 8" X 8"
12" X 10" X 10"
12" X 12" X 12"
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 48
Model KM Flexible Duct
* Designed for low to medium pressure systems
* R-6.0 * 25' per bag
Positive: 10 inches (4"-16" ID), 6 inches (18"-20" ID)
Negative: ½ inch (4"-20" ID)
DIAMETER PRICE
4"
6"
8"
10"
12"
14"
16"
18"
20"
Model MK-E Flexible Duct
* Suitable for all pressure heating and cooling systems
* Acoustical duct offers exceptional sound control
* R-6.0 * 25' per box
Positive: 10 inches (4"-12" ID), 6 inches (14"-16" ID)
Negative: 1 inch (4"-12" ID), 1/2 inch (14"-20" ID)
DIAMETER PRICE
6"
8"
10"
12"
14"
16"
18"
Model MK-C Flexible Duct
* Suitable for all pressure heating and cooling systems
* Most durable core available; promotes superior airflow
* R-6.0 * 25' per box
Positive: 16 inches (4"-10" ID), 10 inches (12"-16" ID)
Negative: 2 inch (4"-16" ID)
DIAMETER PRICE
6"
8"
10"
12"
14"
16"
FLEX DUCT - THERMAFLEX
* Pressure Rating: (WG):
* Pressure Rating: (WG):
* Pressure Rating: (WG):
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 49
SCREWS
PRICE
SPEED PT SCREW 1/2" #10 (1000 COUNT)
SPEED PT SCREW 1/2" #10 (500 COUNT)
SELF TAP SCREW 1/2" #10 (1000 COUNT)
SELF TAP SCREW 1/2" #10 (500 COUNT)
WHITE TIP SCREW 1.5" #8 (250 COUNT)
AIRSEAL, FIRE SEAL, BRUSHES PRICE
TAPE & PANDUIT STRAP PRICE
BIG WILLY SOCKETS
PRICE
9/16" - 6"L WILLY SOCKET
9/16" - 12"L WILLY SOCKET
2.5" 324A FOIL TAPE UL181A/B
PANDUIT STRAP 36" BAG OF 50
3" SCRIM TAPE
DESCRIPTION
2" PAINT BRUSH SB-2
2" 555 FLEX FIT METALIC TAPE
SIZE
9/16" - 3"L WILLY SOCKET
DUCT ACCESSORIES / TOOLS
SIZE
DESCRIPTION
AIRSEAL 33 GREY 1 GALLON PAIL
FIRE SEAL 10.5OZ TUBE FS-T
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
Page 51
MAP LOCATION
Google Maps Directions Collins Walker Website
COLLINS WALKER INC.11370 ANAHEIM DR.
DALLAS, TEXAS 75229
972-247-5433
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016
1. Prices are selling prices.
2. Payment terms are net 30 days from date of invoice with approved credit.
3. Items to be returned to stock are subject to a restocking fee.
4. All shipments from stock are F.O.B Dallas, freight prepaid and added to the invoice.
5. Warehouse warranties are standard manufacturers warranty.
6. Pricing is subject to change without notice.
7. Title to all material shall remain the sellers until the purchase is paid in full.
8. Claims : The respositbility of Collins Walker, Inc. ceases upon delivery of
materials in good order to the carrier. Any claims for damages, shortages,
or loss in transport must be filed by the customer against the transportion
company. Claims of shortage will not be considered unless made within
30 days after receipt of goods.
TERMS AND CONDITIONS OF SALE
*All returns must be in new condition and are subjuct to a 25% restocking fee.
**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016