Stirrers - AS LTD慙witeg峯WiseStir ÓMSH-APremium Hotplate Stirrer, Ceramic-Coated Plate PWM...

138

Magnetic Stirrers & HotplatesLong Life Power & MechanismHigh Stability in Very Low & High-Speed/-Temperature

Overhead StirrersPower DC MotorChrome-plated Stainless Steel ChuckAnti-Trembling System

Jar Tester

AccessoriesClampsImpeller / PaddlesStandsetc.

MS-MP8: 8-Point Stirrer

HT-50DX

MS-20AMS-20D

HS-30D-Set

Multi-point Magnetic Stirrers

High Torque Overhead Stirrer

High Speed Overhead Stirrer

StirrersStirrers

Digital / Analog Magnetic Stirrer

WiseStir

www.witeg.de 139

StSt ir rers, Magnet ic

Model MS-20A

Stirring Capacity (H 2O) Max. 20 Lit.

Motor Rating 9 / 4 W

Speed Range Max. 1.500 rpm

Controller Superior Linearity PWM Controller

Plate Size (mm) 180 180Stirring Bar Length Max. 50 mm

Permissible Ambient Temperature Ambient +5 ~ 50 Permissible Relative Moisture 85 %

Material Plate Ceramic Coated Aluminum (Chemical / Acid Resistance)

Body Power Coated Aluminum

Dimension (w d h) (mm) 206 307 99Weight (kg) 3,1 kg

Others CE Certified

Packing Dimension (w d h) (mm) 400 280 200Gross Weight 5 kg

Power Consumption 4 W

Power plug type Hybrid E+F

Power Supply AC 230 V, 50 / 60 Hz

Specification

Ceramic Coated Plate-Chemical/Acid ResistanceCE Certified

Application & Features

Superior Linearity for the Control of Stirring Speed by Specially Designed Control Circuitry. (PWM Control)Smart Design of Body : Made by Aluminum Die-Casting.Ceramic Coated Plate-Chemical /Acid Resistance.Free Voltage (AC 80 V ~ 240 V, 50 / 60 Hz) by SMPS.CE Certified.

Ordering Information

DH.WMS03122 Magnetic Stirrer, MS-20A, 180 180 mm, 0~1.500 rpm

Additional Function AccessoriesDH.WHP503011 Stand Rod, RD100, Stainless Steel,

12,7 450 mm, for HP-30A / 30D, MSH-30A / 30DDH.WHP503036 Stand Rod, RD200, Stainless Steel,

12 L 450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A/55A, MSH-50D / 55D and SMHS

DH.WHP503012 Holder 킴Clamp, CL220, for Temperature Sensor

鑒鑒크텍텍캥캥캄캄홱홱캣캣크텝텝峯峯홱홱쥑쥑회회쥠쥠회회쥑쥑칩칩캥캥회회慙慙慘慘캤캤크칩칩캣캣홱홱크칩칩훅훅칩칩회회투투칩칩쥐쥐투투홱홱크후후峯峯慙慙慘慘크빔빔후후캤캤캥캥慙慙툭툭홱홱캣캣’캤캤크템템홱홱峰峰후후홱홱캤캤캥캥얗얗

Premium Magnetic Stirrer (MS-20A)

witeg WiseStir MS-A Premium Magnetic Stirrer, Ceramic-Coated Plate, 180 180 mm

PWM Control System, Precise Speed Control, Free Voltage, up to 1.500 rpm, Max. 20 Lit.

180 mm

Ceramic CoatedPlate

180 mm

홈홈慙慙후후크석석회회투투투투크쥠쥠회회慘慘홰홰크툭툭칩칩캥캥쥑쥑캄캄회회慘慘쥡쥡크쥐쥐홱홱칩칩밗밗홱홱캣캣캤캤크칩칩慘慘홰홰크쥠쥠투투칩칩캤캤밗밗캤캤크회회慘慘크慙慙후후캣캣크쥡쥡홱홱慘慘홱홱캣캣칩칩투투크쥑쥑칩칩캥캥칩칩투투慙慙쥡쥡후후홱홱크크칩칩캥캥크쥠쥠慙慙투투투투慙慙석석회회慘慘쥡쥡크峯峯칩칩쥡쥡홱홱캤캤크택택크탉탉탉탉포포크탉탉탐탐포포크窪窪毘毘탉탉폭폭窪窪毘毘탓탓얗얗

홈홈慙慙후후크석석회회투투투투크쥠쥠회회慘慘홰홰크툭툭칩칩캥캥쥑쥑캄캄회회慘慘쥡쥡크캤캤캥캥회회캣캣캣캣회회慘慘쥡쥡크쥐쥐칩칩캣캣캤캤크회회慘慘크慙慙후후캣캣크쥡쥡홱홱慘慘홱홱캣캣칩칩투투크쥑쥑칩칩캥캥칩칩투투慙慙쥡쥡후후홱홱크칩칩캥캥크크크쥠쥠慙慙투투투투慙慙석석회회慘慘쥡쥡크峯峯칩칩쥡쥡홱홱캤캤크택택크탉탉탓탓窪窪포포크탉탉탓탓탉탉얗얗

witeg Labortechnik GmbH140

St ir rers, Magnet icArt icles

St


DH.WMS03022 Digital Magnetic Stirrer, MS-20D, 180 180 mm, 80~1.500 rpm





Specification

Digital Feedback Control by High-Performance MicroprocessorCeramic Coated Plate-Chemical/Acid ResistancePatented Jog-Shuttle Control SystemCE Certified


Digital Feedback Control by High-Performance Microprocessor.Digital LCD Display with Back-Light Function.Smart Design of Body made by Aluminum Die-Casting. (MS-20D)Ceramic Coated Plate-Chemical /Acid Resistance.Storage function for the set values : RPM and Time.Digital Timer Function : 99 hr 59 minAlarm Function : Error Status and Timer-End.Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)Free Voltage (AC 80V ~ 240V, 50 / 60Hz) by SMPS.Patented Jog-Shuttle Control System.CE Certified.


Model MS-20D

Stirring Capacity (H 2O) Max. 20 Lit.


Speed Range 80 ~ 1.500 rpm

Speed Control Resolution 5 rpm

Speed Accuracy (%) 5Controller Digital Feedback Controller with Jog Shuttle Switch(Turn+Push)

Display Digital LCD Display with Back-Light Function

Timer 99hr 59min (Continuous function included)

Plate Size (mm) 180 180Stirring Bar Length Max. 50 mm


Material Plate Ceramic Coated Aluminum (Chemical / Acid Resistance)

Body Power Coated Aluminum

Dimension (w d h) (mm) 206 307 99Weight (kg) 3,1

Others

CE CertifiedStorage Function (RPM, Timer)

Locking Mode (Jog-Shuttle Input Disabled)Alarm (Error Status and Timer-end)

Packing Dimension (w d h) (mm) 400 280 200Gross Weight 5 kg



Power Supply* AC 230 V, 50 / 60 Hz

Premium Magnetic Stirrer (MS-20D)

witeg WiseStir MS-D Digital Magnetic Stirrer, Ceramic-Coated Plate, 180 180 mm

Digital Feedback Control System, Back Light LCD, 80~1.500 rpm, Max. 20 Lit.

180 mm

Ceramic CoatedPlate

180 mm

Patented Control System(No. 10-0554098)

1 or 2 Mode Buttons + Jog Shuttle Switch

Reeaalliizzee ““Eaassyy ttoo Ussee””

Back- Light LCDPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System



www.witeg.de 141

StSt ir rers, Magnet ic

Model MS-MP4 MS-MP8

Number of Stirring Points 4 (2 2) 8 (4 2)

Distance between Stirring Points 100 mm

Stirring Capacity per Point Max. 0,5 Lit.



Speed Control Resolution 5 rpm

Controller Digital Feedback Controller with Jog Shuttle Switch(Turn+Push)

Display Digital LCD Display with Back-Light Function

Timer 99hr 59min (Continuous Function Included)

Dimension (w d h) (mm) 210 300 65 210 500 65

Stirring Bar Length Max. 30 mm


MaterialPlate Stainless Steel ( 304)Body Power Coated Steel

Weight 2,5 kg 3,5 kg

Others

CE CertifiedStorage Function (RPM, Timer)

Locking Mode (Jog-Shuttle Input Disabled)Alarm ( Error Status and Timer-end)

Packing Dimension (w d h) (mm) 330 300 180 540 330 180Gross Weight 6 kg




Specification


4-Place StirrerDH.WMS03036 Multipoint Magnetic Stirrer, MS-MP4, 4-point

8-Place StirrerDH.WMS03038 Multipoint Magnetic Stirrer, MS-MP8, 8-point


Digital Multi-Point Magnetic Stirrer (MS-MP4) 4-Point Stirrer

witeg WiseStir MS-MP Digital Multi-point Magnetic Stirrers, 4-/ 8- PointsDigital Feedback Control, Synchronous Operation, Max.500 ml per Point, 80~1.200 rpm

Ideally Suitable for Use in Incubators and Climatic ChambersExcellent for Multi-use and wide range of Sample TestingPatented Jog-Shuttle Control SystemCE Certified

Application & FeaturesIdeally Suitable for Use in Incubators and Climatic Chambers.Excellent for Multi-use and wide range fo Sample Testing.Synchronous Operation of 4 / 8 Stirring Points.Increased Effectiveness by Microprocessor Control.Digital LCD Display with Back-Light Function.Up to 0,5 Lit. Stirring Capacity per Point.Smooth Start and Change of Stirring Speed.Digital Timer Function: 99 hr 59 min.Storage Function for the Set Values : RPM and Timer.Extraordinary Mechanical, Physical and Chemical Resistance.Locking Mode supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)Free Voltage (AC 80 V ~ 240 V, 50 / 60 Hz) by SMPS.Patented Jog-Shuttle Control System.CE Certified.




Back Light LCD

210 mm 300 mm

Digital Multi-Point Magnetic Stirrer (MS-MP8) 8-Point Stirrer

Digital FeedbackControllor

210 mm500 mm500 mm500 mm500 mm500 mm500 mm500 mm500 mm500 mm500 mm500 mm500 mm

Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System





St ir rers, Magnet ic with Heat ing (Hotplate St irrer)St

Model MSH-20A MSH-30APlate Size (mm) 180 180 260 260Stirring Capacity (H 2O) Max. 20 Lit.Motor Rating 9 / 4WSpeed Range Max. 1.500 rpm

Temp. Range Max. 380

Heating Power 600 W 1.000 WController Superior Linearity PWM Controller

Heating PlateSpecially Designed Heating Module

(High Uniformity : Temp. Difference 10 % less)

Permissible Ambient Temperature Ambient +5 ~ 50

Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mm

MaterialPlate Ceramic Coated (Chemical / Acid Resistance)Body Powder Coated Aluminum Powder Coated Steel

Dimension (w d h) (mm) 206 307 99 268 387 99Weight 2,8 kg 3,3 kgOthers CE Certified

Packing Dimension (w d h) (mm) 400 280 200 430 320 200

Gross Weight 5 kgPower Consumption 600 W 1 kWPower plug type Hybrid E+F


SpecificationPremium Hotplate Stirrer (MSH-20A)

Premium Hotplate Stirrer, Large Type (MSH-30A)

witeg WiseStir MSH-A Premium Hotplate Stirrer, Ceramic-Coated PlatePWM Control System, Superior Temperature Uniformity, Precise Contol of Temp. 폈RPM, up to 380 , 1.500 rpm, 180 180 mmor 260 260 mm

Superior Temperature Uniformity : Less than 10 % on the Plate atAmbient TemperatureSuperior Linearity for the Control of Temperature & Stirring SpeedCeramic Coated Plate-Chemical / Acid ResistanceCE Certified

Application & FeaturesExcellent for Sample Drying and most General Lab Heating Applications.Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature. Superior Linearity for Temperature Control & Stirring Speed by Specially DesignedControl Circuitry. (PWM Control)Smart Design of Body made by Aluminum Die-Casting. (MSH-20A)Ceramic Coated Plate-Chemical /Acid Resistance.Maximum Temperature of 380 CE Certified.


MSH-20A Hotplate StirrerDH.WMH03120 Hotplate Stirrer, MSH-20A, 180 180 mm,

0~1.500 rpm, to 380

MSH-30A Hotplate StirrerDH.WMH03121 Hotplate Stirrer, MSH-30A, 260 260 mm,

0~1.500 rpm, to 380



12 L 450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A / 55A, MSH-50D / 55D and SMHS



180 mm

PWM ControlSystem

Ceramic CoatedPlate

180 mm

컵탉毗폼 타크窩얗탑폼폼 캣峯툭

260 mm260 mm

컵탉毗폼 타크窩얗탑폼폼 캣峯툭

홈홈慙慙후후크석석회회투투투투크쥠쥠회회慘慘홰홰크툭툭칩칩캥캥쥑쥑캄캄회회慘慘쥡쥡크쥐쥐홱홱칩칩밗밗홱홱캣캣캤캤크칩칩慘慘홰홰크쥠쥠투투칩칩캤캤밗밗캤캤크크크회회慘慘크慙慙후후캣캣크쥡쥡홱홱慘慘홱홱캣캣칩칩투투크쥑쥑칩칩캥캥칩칩투투慙慙쥡쥡후후홱홱크칩칩캥캥크쥠쥠慙慙투투투투慙慙석석회회慘慘쥡쥡크峯峯칩칩쥡쥡홱홱캤캤크택택크탉탉탉탉포포크탉탉탐탐포포크窪窪毘毘탉탉폭폭窪窪毘毘탓탓얗얗

홈홈慙慙후후크석석회회투투투투크쥠쥠회회慘慘홰홰크툭툭칩칩캥캥쥑쥑캄캄회회慘慘쥡쥡크캤캤캥캥회회캣캣캣캣회회慘慘쥡쥡크쥐쥐칩칩캣캣캤캤크회회慘慘크慙慙후후캣캣크쥡쥡홱홱慘慘홱홱캣캣칩칩투투크쥑쥑칩칩캥캥칩칩투투慙慙쥡쥡후후홱홱크칩칩캥캥크쥠쥠慙慙투투투투慙慙석석회회慘慘쥡쥡크峯峯칩칩쥡쥡홱홱캤캤크택택크탉탉탓탓窪窪포포크탉탉탓탓탉탉얗얗

www.witeg.de 143

StSt ir rers, Magnet ic with Heat ing (Hotplate St irrer)

Superior Temperature Uniformity : Less than 10 % on the Plate atAmbient TemperatureSuperior Linearity for the Control of Temperature & Stirring SpeedCeramic Coated Plate (MSH-50A) for Chemical/Acid Resistance orAnodized Plate (MSH-55A) for Scratch PreventionCE Certified

Application & FeaturesExcellent for Sample Drying and most General Lab Heating Applications.Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.Superior Linearity for Temperature Control & Stirring Speed by Specially DesignedControl Circuitry. (PWM Control)Smart Design of Body made by Aluminum Die-Casting. Ceramic Coated Plate (MSH-50A) for Chemical/Acid Resistance or Anodized Plate (MSH-55A)for Scratch Prevention.Maximum Temperature of 380 CE Certified.

Specification

Premium Compact Hotplate Stirrer,Round Type & Anodized Plate

(MSH-55A)

witeg WiseStir MSH-50A Premium Compact Hotplate Stirrer, Round-Type Plate, 135 Ceramic Coated or Anodized Plate, Superior Temperature Uniformity, Precise Control of Temp. 폈 RPM, up to 380 , 1.500 rpm


MSH-50A Hotplate StirrerDH.WMH03150 Hotplate Stirrer, MSH-50A, 135 mm, Ceramic Coated Plate,

0~1.500 rpm, to 380

MSH-55A Hotplate StirrerDH.WMH03155 Hotplate Stirrer, MSH-55A, 135 mm, Anodized Plate,

0~1.500 rpm, to 380





PWM ControlSystem

Anodized Plate135 mm

Premium Compact Hotplate Stirrer,Round Type & Ceramic-Coated Plate

(MSH-50A)

Ceramic Coated Plate

Model MSH-50A MSH-55APlate Size (mm) 135 Stirring Capacity (H 2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range Max. 1.500 rpm

Temp. Range Max. 380 Heating Power 350 WController Superior Linearity PWM Controller

Heating PlateSpecially Designed Heating Module

(High Uniformity : Temp. Difference 10 % less)Fixed Safety Circuit 380


Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mm

MaterialPlate Ceramic Coated AnodizedBody Powder Coated Aluminum

Dimension (w d h) (mm) 160 280 95Weight 2,3 kgOthers CE CertifiedPacking Dimension (w d h) (mm) 400 280 200

Gross Weight 4 kgPower Consumption 350 WPower plug type Hybrid E+F


컵탉毗폼크 타크窩얗탑폼폼크캣峯툭





144<Continued on Next page>

Model MSH-20D MSH-30DPlate Size (mm) 180 180 260 260Stirring Capacity (H 2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm

Temp.Range Max. 380 Accuracy 0,3 at Set Temperature (< 70 )

Temp. Display Resolution 0,1 Temp. Control Resolution 0,5 Heating Power 600 W 1.200 W

Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference 10 % less)


Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn + Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)

MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)Body Powder Coated Aluminum Powder Coated Steel

Dimension (w d h) (mm) 206 307 99 286 387 99Weight 3,3 kg 3,5 kg

Others

CE CertifiedStorage Function (Temp., RPM, Timer)

Locking Mode (Jog-Shuttle Input Disabled)User Self -compensation Function

Alarm (Error Status and Timer-end)

Power Consumption 600 W 1,2 kW

Packing Dimension (w d h) (mm) 400 280 200 430 320 200

Gross Weight 5 kgPower plug type Hybrid E+FPower Supply * AC 230 V, 50 / 60 Hz

Specification

Digital Precise Hotplate (MSH-20D-Set)

witeg WiseStir MSH-D Digital Hotplate Stirrer, Ceramic-Coated Plate, up to 380 포크 0,3

Digital Feedback Control, Accurate Temperature Control, 180 180 mm / 260 260 mm, 80 ~ 1.500 rpm


Holder+Clamp(CL220)

Temp. Sensor(SS220)

Rod (RD200)

180 mm180 mm

Back Light LCD Patented Jog-ShuttleControl System

Patented Jog-Shuttle Control SystemCE Certified


Digital Feedback Control by High-Performance Microprocessor.Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature. Accurate Temp. Control of the Sample in the Vessel Using Optional PT100 Sensor.User’s Self -Compensation Function : to Control Difference between Real Temp. and Indicated Temp. ( 10,0 )Digital LCD Display with Back-Light Function. Aluminum Die -Casting Body. (MSH-20D)Ceramic Coated Plate-Chemical /Acid Resistance.Storage Function : Timer and Alarm.Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)Patented Jog-Shuttle Control System.CE Certified.

Ceramic CoatedPlate

컵탉毗폼 타크毗폼컵窩얗탑폼폼 캣峯툭

260 mm260 mm

컵탉毗폼크 타크毗폼컵窩얗탑폼폼크캣峯툭

Digital Precise Hotplate, Large Type (MSH-30D)

www.witeg.de


145


MSH-20D Hotplate Stirrer Unit 폈크Package SetDH.WMH03020 Digital Hotplate Stirrer, MSH-20D-Unit Only,

180 180 mm, 80~1.500 rpm, to 380 DH.WMH03021 Digital Hotplate Stirrer Package, MSH-20D-Set

with SS200 External Temp.Sensor, RD200 Support Rod and CL220 ClampPacking Dimension w 400 d 280 h 200 mm, Gross Weight 5 kg

MSH-30D Hotplate Stirrer Unit 폈크Package Set DH.WMH03022 Digital Hotplate Stirrer, MSH-30D-Unit Only,

260 260 mm, 80~1.500 rpm, to 380 DH.WMH03023 Digital Hotplate Stirrer Package, MSH-30D-Set

with SS100 External Temp. Sensor, RD100 Support Rod and CL220 ClampPacking Dimension w 430 d 320 h 200 mm, Gross Weight 5 kg

Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100,

PT100 , for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110,

PT100 , Teflon Coated, for HP-30D, MSH-30D and SMHS

DH.WHP503030 Direct Contact Temperature Sensor, SS200, PT100 , for HP-20D, MSH-20D and MSH-50D / 55D

DH.WHP503031 Direct Contact Temperature Sensor, SS210, PT100 , Teflon Coated, for HP-20D, MSH-20D and MSH-50D / 55D

DH.WHP503011 Stand Rod, RD100, Stainless Steel, 12,7 L 450 mm, for HP-30A / 30D, MSH-30A / 30D

DH.WHP503036 Stand Rod, RD200, Stainless Steel, 12 L 450 mm, for HP-20A / 20D, MSH-20A / 20D, MSH-50A / 55A, MSH-50D / 55D and SMHS

DH.WHP503012 Holder 킴Clamp, CL220, for Temp. Sensor

PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of 0,3

<Continued from... witeg WiseStir MSH-D Digital Hotplate Stirrer>

<Teflon Coated PT100 Sensor : SS110/SS210>

<Temp. PT100 Sensor : SS100/SS200>

<Stand Rod:RD100/RD200>

<Holder +Clamp:CL220>





SpecificationModel MSH-50D MSH-55D

Plate Size (mm) 135 Stirring Capacity (H 2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm

Temp.Range Max. 380 Accuracy 0,3 at Set Temperature (< 70 )

Temp. Display Resolution 0,1 Temp. Control Resolution 0,5 Heating Power 350 W

Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference 10 % less)

Fixed Safety Circuit 380 Permissible Ambient Temperature Ambient +5 ~ 50

Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)

MaterialPlate Ceramic Coated AnodizedBody Powder Coated Aluminum

Dimension (w d h) (mm) 160 280 95Weight 2,3 kg

Others

CE CertifiedStorage Function (Temp., RPM, Timer)

Locking Mode (Jog-Shuttle Input Disabled)User Self-compensation Function


Packing Dimension (w d h) (mm) 400 280 200

Gross Weight 4 kgPower Consumption 350 WPower plug type Hybrid E+FPower Supply * AC 230 V, 50 / 60 Hz

Digital Compact Hotplate Stirrer,Round Type & Ceramic-Coated Plate (MSH-50D-Set)

witeg WiseStir MSH-50D Digital Compact Hotplate Stirrer, Round-Type Plate, 135

Ceramic Coated or Anodized Plate, Digital Feedback Control, Back Light LCD, up to 380 포크 0,3 , 80 ~ 1.500 rpm


Digital Feedback Control by High-Performance MicroprocessorCeramic Coated Plate (MSH-50D) for Chemical/Acid Resistance orAnodized Plate (MSH-55D) for Scratch PreventionPatented Jog-Shuttle Control SystemCE Certified

Application & FeaturesDigital Feedback Control by High-Performance Microprocessor.Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature. Accurate Temp. Control of the Sample in the Vessel Using Optional PT100 Sensor.User’s Self -Compensation Function : To Control Difference between Real Temp. and Indicated Temp. ( 10,0 )Digital LCD Display with Back-Light Function.Ceramic Coated Plate (MSH-50D) for Chemical/Acid Resistance or Anodized Plate (MSH-55D)for Scratch Prevention.Aluminum Die -Casting Body. Storage Function : Timer & Alarm.Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)Patented Jog-Shuttle Control System.CE Certified.

Back Light LCD

Holder+Clamp(CL220)

Temp. Sensor(SS200)

Rod (RD200)

Ceramic-CoatedPlate, 135





<Continued on Next page>

컵탉毗폼 타크毗폼컵窩얗탑폼폼캣峯툭

www.witeg.de 147



MSH-50D Hotplate Stirrer Unit 폈크Package SetDH.WMH03050 Digital Hotplate Stirrer, MSH-50D-Unit,

Ceramic-Coated, 135 mm, 80~1.500 rpm, to 380 ƉDH.WMH03051 Digital Hotplate Stirrer Package, MSH-50D-Set

with SS500 External Temp. Sensor,RD200 Support Rod and CL220 ClampPacking Dimension w 400 d 280 h 200 mm, Gross Weight 4 kg

MSH-55D Hotplate Stirrer Unit 폈크Package SetDH.WMH03055 Digital Hotplate Stirrer, MSH-55D-Unit,

Anodized, 135 mm, 80~1.500 rpm, to 380 ƉDH.WMH03056 Digital Hotplate Stirrer Package, MSH-55D-Set

with SS500 External Temp. Sensor,RD200 Support Rod and CL220 ClampPacking Dimension w 400 d 280 h 200 mm, Gross Weight 4 kg

Additional Function AccessoriesDH.WHP503060 Direct Contact Temperature Sensor, SS500,

PT100 , for MSH-50D / 55DDH.WHP503061 Direct Contact Temperature Sensor, SS510,

PT100 , Teflon Coated, for MSH-50D / 55DDH.WHP503036 Stand Rod, RD200, Stainless Steel, 12 L 450 mm,

for HP-20A / 20D, MSH-20A / 20D, MSH-50A / 55A,MSH-50D / 55D and SMHS

DH.WHP503012 Holder킴Clamp, CL220, for Temp. Sensor

PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of 0,3

Digital Compact Hotplate Stirrer,Round Type & Anodized Plate

(MSH-55D)

AnodizedPlate

<Teflon Coated PT100 Sensor : SS510>

<Temp. PT100 Sensor : SS500>

<Stand Rod:RD200>


<Continued from... witeg WiseStir MSH-50D Digital Compact Hotplate Stirrer >

컵탉毗폼크 타크毗폼컵窩얗탑폼폼크캣峯툭





Model SMHS-3 : 3 Places SMHS-6 : 6 PlacesNumber of Places 3 1 Places 3 2 PlacesStirring Capacity (H 2O) Max. 20Lit.Motor Rating (9 / 4 W) 3 (9 / 4 W) 6Speed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm

Temp.Range Max. 350 ƉAccuracy 0,3 at Set Temperature (< 70 )

Temp. Display Resolution 0,1 ƉTemp. Control Resolution 0,5 ƉHeating Power 400 W / Place (Total 1,2 kW) 400 W / Place (Total 2,4 kW)

Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference less than 10 %)

Permissible AmbientTemperature Ambient +5 ~ 50

Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)Plate Size (mm) 140 140

MaterialPlate Ceramic Coated AluminumBody Powder Coated Steel

Dimension (w d h) (mm) 510 240 100 510 410 180Weight 7,9 kg 15,2 kg

OthersCE Certified

Storage Function (Temp., RPM, Timer)Locking Mode (Jog-Shuttle Input Disabled)

Power Consumption 1,5 kW 3 kWPacking Dimension (w d h) (mm) 540 330 170 570 540 230

Gross Weight 10 kg 18 kgPower plug type Hybrid E+FPower Supply AC 230 V, 50 / 60 Hz

witeg WiseStir SMHS Systematic Multi-Hotplate Stirrers, 3-/6- Places, Ceramic-Coated PlatesDigital Feedback Control, Back Light LCD, Independent Heating 폈크Stirring Control, up to 350 / 1.500 rpm

Back Light LCD

140 mm140 mm


Systematic Multi-Hotplate Stirrers,3 1 Ceramic-Coated Plates (SMHS-3)

Excellent for Multi-use and a Wide Various Sample TestingPatented Jog-Shuttle Control SystemCE Certified

Application & FeaturesExcellent for Multi-use and wide range of Sample Testing.Systemized 3 and 6-Hotplate Stirrer. Independent Heating and Stirring Control.Digital Feedback Control by High-Perfomance Microprocessor.Ceramic Coated Plate-Chemical/Acid Resistance.Maximum Temperature of 350 Ɖ with 0,3 Ɖ Control Accuracy.Accurate Temp. Control of the Sample in the Vessel using Optional PT100 Sensor.Digital LCD Display with Back-Light Function.Digital Timer Function Included : 99 hr 59 min.Storage Function for the Set Values : Temperature, RPM and Timer.Locking Mode for Experimental Safety Supported.Patented Jog-Shuttle Control System.CE Certified.

Back Light LCD

140 mm140 mm

Systematic Multi-Hotplate Stirrers,3 2 Ceramic-Coated Plates (SMHS-6)



Specification

<Teflon Coated PT100 Sensor :SS110/SS210>

<Temp. PT100 Sensor : SS100/SS200>

<Stand Rod:RD100/RD200>





Ordering Information3 Hotplate Stirrer, 3 1 PlacesDH.WMH03503 1 3 Hotplate & Stirrer, SMHS-3, 3 Position,

510 240 100 mm, 140 140 mm, to 350

6 Hotplate Stirrer, 3 2 PlacesDH.WMH03506 2 3 Hotplate & Stirrer, SMHS-6, 6 Position,

510 410 180 mm, 140 140 mm, to 350

Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100, PT100

for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110, PT100

Teflon Coated, for HP-30D, MSH-30D and SMHSDH.WHP503036 Stand Rod, RD200, Stainless Steel,

12 450 mm, for HP-20D, MSH-20D and SMHSDH.WHP503012 Holder킴Clamp, CL220 for Temp. SensorPT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of 0,3

컵탉탑폼 타크窩얗탑폼폼캣峯툭

컵탉탑폼 타크窩얗탑폼폼캣峯툭




St ir rer , Overhead/ High-Speed St

See page 156, 157 for the Specifications of Accessories. See page 158 for the Product Line & Selection Guide

Model HS-50A HS-120A

Stirring Capacity (H 2O) Max. 10 Lit. Max. 20 Lit.

Maximum Viscosity 10.000 mPas 50.000 mPas

Motor Rating (Input / Output) 83 / 75 W (1 / 10 HP) 130 / 120 W (1 / 6 HP)

Maximum Torque 85 Ncm 145 Ncm

Max. Shaft Diameter 8 mm

Speed Range Max. 3.000 rpm

Motor Direct Driven Motor

Controller Analog Phase Controller

OperatingEnvironment

Ambient Temp. Range 0 ~ 40

Max. Permissible Humidity 80 %

Safety Device Over Heat Protector for motor

Dimension (w d h) (mm) 90 145 180

Weight 4,5 kg 5,3 kg

Others CE CertifiedSmooth Start and Change of the Stirring Speed for stable running

Power Consumption 75 W 120 W

Packing Dimension (w d h) (mm) 320 300 180Gross Weight 5 kg 8 kg




With 10 Lit. Stirring CapacityDH.WOS01210 Overhead Stirrer, HS-50A-Unit Only, 10 Lit., 10.000 mPas DH.WOS01211 Overhead Stirrer Package, HS-50A-Set,

with PL010 Stainless Steel Impeller ( 8 L 500 mm Rod, 50 mm Blade), CL200 Clamp and KA1177 Deluxe Safety Stand (34 29 cm Stand Base, 23 h 800 mm Rod)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 10 kg

With 20 Lit. Stirring CapacityDH.WOS01215 Overhead Stirrer, HS-120A-Unit Only, 20 Lit., 50.000 mPas DH.WOS01216 Overhead Stirrer Package, HS-120A-Set,

with PL015 Stainless Steel Impeller ( 8 L 500 mm Rod, 70 mm Blade),CL200 Clamp and KA1177 Deluxe Safety Stand (34 29 cm Stand Base, 23 h 800 mm Rod)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 13 kg

witeg WiseStir HS-A Analog High-Speed Overhead Stirrers, Max.10/20 Lit.Easy-to-Use Dial for Speed Setting, for Low- to Medium-Viscous Samples, Max. 3.000 rpm, up to 50.000 mPas

Specification


Analog High-Speed Overhead Stirrer (HS-50A-Set)

High Speed Stirring by Direct Driven MotorOver-Heat Protection Function for motorCE Certified


Ideal for Stirring Low-to Medium-Viscous Material.Ideal for Schools, Universities and Inspection Laboratories.High Speed Stirring by Direct Driven Motor.Smooth Start and Change of the Stirring Speed.The Position (Height) of Impeller is Adjustable.Over-Heat Protection Function for Motor.Chrome-Plated & Stainless Steel Chuck - Prevention from Corrosion.CE Certified.

Analog High-Speed Overhead Stirrer (HS-120A-Unit)

Clamp (CL200)

Chrome-platedChuck

Stand (KA1177)

HS-120A-Unit

Stirrer Unit(HS-50A)

Stainless Steel Impeller (PL010)

Chrome-platedChuck

홈홈慙慙후후크석석회회투투투투크쥠쥠회회慘慘홰홰크툭툭칩칩캥캥쥑쥑캄캄회회慘慘쥡쥡크쥐쥐홱홱칩칩밗밗홱홱캣캣캤캤크회회慘慘크慙慙후후캣캣크쥡쥡홱홱慘慘홱홱캣캣칩칩투투크쥑쥑칩칩캥캥칩칩투투慙慙쥡쥡후후홱홱크칩칩캥캥크쥠쥠慙慙투투투투慙慙석석회회慘慘쥡쥡峯峯칩칩쥡쥡홱홱캤캤크택택크窪窪毘毘窪窪

www.witeg.de 151

StSt ir rer , Overhead/ High-Speed


Model HS-30D HS-100DStirring Capacity (H 2O) Max. 10 Lit. Max. 20 Lit.Maximum Viscosity 10.000 mPas 50.000 mPasMotor Rating (Input / Output) 83 / 75 W ( 1/10 HP) 130 / 120 W (1/6 HP)Maximum Torque 85 Ncm 145 NcmMax. Shaft Diameter 8 mmSpeed Range 200 ~ 3.000 rpmMotor Direct Driven MotorController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light Function


Ambient Temp. Range

0 ~ 40

Max. PermissibleHumidity

80 %

Safety Device Over Load & Heat Protector for motorDimension (w d h) (mm) 90 145 180Weight 4,5 kg 5,3 kg

OthersCE Certified

Smooth Start and Change of the Stirring Speed for stable runningStorage Function (RPM, Timer)

Packing Dimension (w d h) (mm) 320 300 180Gross Weight 5 kg 8 kgPower Consumption 75 W 120 WPower plug type Hybrid E+FPower Supply* AC 230 V, 50 / 60 Hz


With 10Lit. Stirring CapacityDH.WOS01015 Digital Overhead Stirrer, HS-30D-Unit Only, 10 Lit., 10.000 mPas DH.WOS01016 Digital Overhead Stirrer Package, HS-30D-Set

with PL010 Stainless Steel Impeller ( 8 L 500 mm Rod, 50 mm Blade),CL200 Clamp and ST110 Standard Plate Stand( 16 L 800 mm Rod, 20 35 cm Plate)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 18 kg

With 20 Lit. Stirring CapacityDH.WOS01025 Digital Overhead Stirrer, HS-100D-Unit Only, 20 Lit., 50.000 mPas DH.WOS01026 Digital Overhead Stirrer Package, HS-100D-Set

with PL015 Stainless Steel Impeller ( 8 L 500 mm Rod, 70 mm Blade),CL200, Clamp and ST120 Wide Plate Stand( 23 h 1.000 mm Rod, 30 40 cm Plate)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 21 kg

witeg WiseStir HS-D Digital High-Speed Overhead Stirrer, Max.10/20 Lit.Digital Feedback Control, Steady 폈 Constant Stirring Speed Against Viscosity, 200 ~ 3.000 rpm, to 50.000 mPas


Digital High-Speed Overhead Stirrer (HS-30D-Set)

Digital High-Speed Overhead Stirrer (HS-100D-Unit)

Clamp (CL200)

Chrome-platedChuck

Back light LCD

Stirrer Unit(HS-30D)


Stand (ST110)

Digital Feedback Control: Steady and Constant Stirring Speed against Viscosity Change of a Sample during ReactionPatented Jog-Shuttle Control SystemCE Certified

Application & FeaturesIdeal for Stirring Low-to Medium-Viscous Material.Digital Feedback Control: Steady and Constant Stirring Speed against Viscosity Change of a sample during Reaction.Digital LCD Display with Back-Light Function. Smooth Start and Change of the Stirring Speed.Over-Load Protection and Over-Heat Protection Functions for Motor.High Speed Stirring by Direct Driven Motor.The Position(Height) of Impeller is Adjustable. Storage Function for Set Value : RPM.Chrome -Plated & Stainless Steel Chuck-Prevention from Corrosion.Patented Jog-Shuttle Control System.CE Certified.






Back light LCD

Chrome-platedChuck

Digital FeedbackControl


Specification


St ir rer , Overhead/ High-SpeedSt


Model HS-30T HS-100TStirring Capacity (H 2O) Max. 10 Lit. Max. 20Lit.Maximum Viscosity 10.000 mPas 50.000 mPasMotor Rating (Input / Output) 83 / 75 W (1 / 10 HP) 130 / 120 W (1 / 6 HP)Maximum Torque 85 Ncm 145 NcmMax. Shaft Diameter 8 mmSpeed Range 200 ~ 3.000 rpmMotor Direct Driven Motor

ControllerDigital Feedback Controller with Jog Shuttle Switch (Turn + Push)

Remote typeCable Length of Remote Controller 1,8 mDisplay Digital LCD Display with Back - Light Function


Ambient Temp. Range

0 ~ 40


80 %

Safety Device Over Load & Heat Protector for motorDimension (w d h) (mm) 90 100 180Weight * 3 kg 3,8 kg

Others

CE CertifiedSmooth Start and Change of the Stirring Speed for Stable Running

Storage Function (RPM, Timer)Locking Mode (Jog-Shuttle Input disabled)


Packing Dimension (w d h) (mm) 580 340 230Gross Weight 5 kg 8 kgPower Consumption 75 W 120 WPower plug type Hybrid E+FPower Supply** AC 230 V, 50 / 60 Hz


With 10 Lit. Stirring CapacityDH.WOS01035 Digital Overhead Stirrer, HS-30T-Unit Only,

with Remote Controller, 10 Lit., 10.000 mPas DH.WOS01036 Digital Overhead Stirrer Package, HS-30T-Set,

with Remote controller, PL010 Stainless Steel Impeller ( 8 L 500 mm Rod, 50 mm Blade), CL200 Clamp and ST110 Standard Plate Stand ( 16 L 800 mm Rod, 20 35 cm Plate)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 18 kg

With 20 Lit. Stirring CapacityDH.WOS01045 Digital Overhead Stirrer, HS-100T-Unit Only

with Remote Controller, 20 Lit., 50.000 mPas DH.WOS01046 Digital Overhead Stirrer Package, HS-100T-Set,

with Remote Controller, with PL015 Stainless Steel Impeller( 8 L 500 mm Rod, 70 mm Blade), CL200 Clamp and ST120 Wide Plate Stand ( 23 h 1.000 mm Rod, 30 40 cm Plate)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 21 kg

witeg WiseStir HS-T Digital High-Speed Overhead Stirrer, with Remote ControllerMax.10/20 Lit., Remote Digital Feedback Controller, Steady 폈Constant Stirring Speed, 200 ~ 3.000 rpm, to 50.000 mPas

Specification

鑒鑒크싻싻홱홱회회쥡쥡캄캄캥캥크慙慙쥠쥠크템템홱홱툭툭慙慙캥캥홱홱크빔빔慙慙慘慘캥캥캣캣慙慙투투투투홱홱캣캣크탬탬크窪窪포포탑탑밗밗쥡쥡크크크크크크크크크크크크크크크크크크크鑒鑒鑒鑒크텍텍캥캥캄캄홱홱캣캣크텝텝峯峯홱홱쥑쥑회회쥠쥠회회쥑쥑칩칩캥캥회회慙慙慘慘캤캤크칩칩캣캣홱홱크칩칩훅훅칩칩회회투투칩칩쥐쥐투투홱홱크후후峯峯慙慙慘慘크빔빔후후캤캤캥캥慙慙툭툭홱홱캣캣’캤캤크템템홱홱峰峰후후홱홱캤캤캥캥얗얗

Digital High-Speed Overhead Stirrer with Remote Controller(HS-30T-Set)

Digital High-Speed Overhead Stirrer with Remote Controller(HS-100T-Unit)

Clamp (CL200)

Chrome-platedChuck

Remote Controller

Stand (ST110)

Stirrer Unit(HS-30T)


Remote Digital Feedback Controller : Steady and Constant Stirring Speed against Viscosity Change of a Sample during ReactionPatented Jog-Shuttle Control System CE Certified

Application & FeaturesIdeal for Stirring Low-to Medium-Viscous Material.Remote Digital Feedback Controller : Steady and Constant Stirring Speed against Viscosity Changeof a Sample during Reaction.Digital LCD Display for RPM, Power Bar Graph and Status.Over-Load Protection and Over-Heat Protection Functions for Motor.Smooth Start and Change of the Stirring Speed. High Speed Stirring by Direct Driven Motor.The Position(height) of Impeller is Adjustable. Storage Function for Set Value : RPM.Chrome-Plated & Stainless Steel Chuck - Prevention from Corrosion.Patented Jog-Shuttle Control System. CE Certified.




Chrome-platedChuck

Digital Feedback Control

Remote Controller

홈홈慙慙후후크석석회회투투투투크쥠쥠회회慘慘홰홰크툭툭칩칩캥캥쥑쥑캄캄회회慘慘쥡쥡크쥐쥐홱홱칩칩밗밗홱홱캣캣캤캤크회회慘慘크慙慙후후캣캣크쥡쥡홱홱慘慘홱홱캣캣칩칩투투크쥑쥑칩칩캥캥칩칩투투慙慙쥡쥡후후홱홱크칩칩캥캥크쥠쥠慙慙투투투투慙慙석석회회慘慘쥡쥡크峯峯칩칩쥡쥡홱홱캤캤크택택크窪窪毘毘窪窪

www.witeg.de 153

StSt ir rer , Overhead/ High-Torque


Model HT -50AX HT - 120AX

Stirring Capacity (H 2O) Max. 40 Lit. Max. 60 Lit.

Maximum Viscosity 100.000 mPas 150.000 mPas

Motor Rating (Input / Output) 83 / 75 W (1/10 HP) 130 / 120 W ( 1/6 HP)

Maximum Torque 300 Ncm 500 Ncm

Max. Shaft Diameter 10 mm


Motor 3,5:1 Ratio Worm-Geared Motor

Controller Analog Phase Controller


Ambient Temp. Range

0 ~ 40


80 %

Safety Device Over Heat Protector for motor

Dimension (w d h) (mm) 90 180 130 90 210 130Weight* 3,5 kg 4 kg

OthersCE Certified

Smooth Start and Change of the Stirring Speed for Stable Running

Packing Dimension (w d h) (mm) 320 300 180Gross Weight 5 kg 8 kg

Power Consumption 75 W 120 W


Power Supply** AC 230 V, 50 / 60 Hz


With 40 Lit. Stirring CapacityDH.WOS01251 Overhead Stirrer, HT- 50AX-Unit Only , 40 Lit., 100.000 mPas DH.WOS01252 Overhead Stirrer Package, HT- 50AX-Set,

with PL020 Stainless Steel Impeller ( 8 L 500 mm Rod, 90 mm Blade), CL200 Clamp and KA1177 Safety Stand( 23 h 800 mm Rod, 34 29 cm Stand Base)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 10 kg

With 60 Lit. Stirring CapacityDH.WOS01271 Overhead Stirrer, HT-120AX-Unit Only , 60 Lit., 150.000 mPas DH.WOS01272 Overhead Stirrer Package, HT-120AX-Set,

with PL020 Stainless Steel Impeller ( 8 L 500 mm Rod, 90 mm Blade),CL200 Clamp and KA1177 Safety Stand ( 23 h 800 mm Rod, 34 29 cm Stand Base)

Packing Dimension w 580 d 340 h 230 mm, Gross Weight 13 kg

witeg WiseStir HT-AX Analog High-Torque Overhead Stirrer, Max.40/60 Lit.Easy-to-Use Dial for Speed Setting, High-Viscosity Fluids, Max.1.000 rpm, 150.000 mPas

Specification


Analog High-Torque Overhead Stirrer(HT-50AX-Set)

Analog High-Torque Overhead Stirrer(HT-120AX-Unit)

Clamp (CL200)

Chrome-platedChuck

Stirrer Unit(HT-50AX)


Stand (KT1177)

High Torque Stirring by 3,5:1 Ratio Worm-geared MotorSmooth Start and Change of the Stirring SpeedCE Certified

Application & FeaturesIdeal for Stirring Material of Viscosities Ranging from Light Watery Solutions to High-Viscosity Fluids.Ideal for Schools, Universities and Inspection Laboratories. High Torque Stirring by 3,5:1 Ratio Worm-geared Motor.Smooth Start and Change of the Stirring Speed.The Position(height) of Impeller is Adjustable.Over-Heat Protection Function for Motor.Chrome-Plated & Stainless Steel Chuck-Prevention from Corrosion.CE Certified.

Chrome-platedChuck

HT-50AX-Unit



St ir rer , Overhead/ High-TorqueSt


Model HT-50DX HT-120DXStirring Capacity (H 2O) Max. 40 Lit. Max. 60 Lit.Maximum Viscosity 100.000 mPas 150.000 mPasMotor Rating (Input / Output) 83 / 75 W ( 1 / 10 HP) 130 / 120 W ( 1 / 6 HP)Maximum Torque 300 Ncm 500 NcmMax. Shaft Diameter 10 mmSpeed Range 50 ~ 1.000 rpmMotor 3,5 : 1 Ratio Worm-Geared MotorController Digital Feedback Controller with Jog Shuttle Switch (Turn + Push)Display Digital LCD Display with Back-Light Function


Ambient Temp. Range

0 ~ 40


80 %

Safety Device Over Load & Heat Protector for MotorDimension (w d h) (mm) 90 180 130 90 210 130Weight* 3,5 kg 4 kg

Others


Storage Function (RPM, Timer)Locking Mode (Jog-Shuttle Input Disabled)

Alarm ( Error Status and Timer-end)

Packing Dimension (w d h) (mm) 320 300 180Gross Weight 5 kg 8 kgPower Consumption 75 W 120 WPower plug type Hybrid E+F

Power Supply** AC 230 V, 50 / 60 Hz


With 40 Lit. Stirring CapacityDH.WOS01051 Digital Overhead Stirrer, HT-50DX-Unit Only, 40 Lit., 100.000 mPas DH.WOS01052 Digital Overhead Stirrer Package, HT-50DX-Set,

with PL020 Stainless Steel Impeller ( 8 L 500 mm Rod, 90 mm Blade), CL200 Clamp and ST120 Wide Plate Stand( 23 h 1.000 mm Rod, 30 40 cm Plate)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 18 kg

With 60 Lit. Stirring CapacityDH.WOS01071 Digital Overhead Stirrer, HT-120DX-Unit Only, 60 Lit., 150.000 mPas DH.WOS01072 Digital Overhead Stirrer Package, HT-120DX-Set,

with PL020 Stainless Steel Impeller ( 8 L 500 mm Rod, 90 mm Blade), CL200 Clamp and ST200 Delux Safety Stand( 23 h 1.200 mm Rod,39 up to 75 cm Stand Base)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 21 kg

witeg WiseStir HT-DX Digital High-Torque Overhead Stirrer, Max.40/60 Lit.Digital Feedback Control, Steady 폈 Constant Stirring Speed Against Viscosity, 50 ~ 1.000 rpm, to 150.000 mPas

Specification


Digital High-Torque Overhead Stirrer (HT-50DX-Set)

Digital High-Torque Overhead Stirrer (HT-120DX-Unit)

Clamp (CL200)

Chrome-platedChuck

Stand (ST110)

Stirrer Unit(HT-50DX)


Patented Jog-Shuttle Control SystemCE Certified

Application & FeaturesIdeal for Stirring Material of Viscosities Ranging from Light Watery Solutions to High-Viscosity Fluids.Digital Feedback Control: Steady and Constant Stirring Speed Against Viscosity Change of a Sample during Reaction.Over-Load Protection and Over-Heat Protection Functions for Motor.High Torque Stirring by 3,5 : 1 Ratio Worm-Geared Motor.Digital LCD Display with Back-Light Function. Smooth Start and Change of the Stirring Speed.The Position (Height) of Impeller is Adjustable. Digital Timer Function : 99 hr 59 min.Storage Function for the set values : rpm & Timer. Alarm Function : Error Status and Timer-end.Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)Chrome-Plated & Stainless Steel Chuck - Prevention from Corrosion.Patented Jog-Shuttle Control System. CE Certified.




Back light LCD

Back light LCD


Chrome-platedChuck





www.witeg.de 155

StSt ir rer , Overhead/ High-Torque



With 40 Lit. Stirring Capacity DH.WOS01065 Digital Overhead Stirrer, HT-50T-Unit Only,

with Remote Controller, 40 Lit., 100.000 mPas DH.WOS01066 Digital Overhead Stirrer Package, HT-50T-Set,

with Remote Controller, PL020 Stainless Steel Impeller ( 8 L 500 mm Rod, 90 mm Blade), CL200 Clamp and ST120 Wide Plate Stand ( 23 h 1.000 mm Rod, 30 40 cm Plate)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 18 kg

With 60 Lit. Stirring CapacityDH.WOS01075 Digital Overhead Stirrer, HT-120T-Unit Only

with remote controller, 60 Lit., 150.000 mPasDH.WOS01076 Digital Overhead stirrer Package, HT-120T-Set,

with Remote Rontroller, PL020 Stainless Steel Impeller( 8 L 500 mm Rod, 90 mm Blade), CL200 Clamp and ST200 Delux Safety Stand ( 23 h 1.200 mm Rod, 39 up to 75 cm Stand Base)Packing Dimension w 580 d 340 h 230 mm, Gross Weight 21 kg

witeg WiseStir HT-T Digital High-Torque Overhead Stirrer with Remote ControllerMax.40/60 Lit., Remote Digital Feedback Controller, Steady 폈 Constant Stirring Speed, 50 ~ 1.000 rpm, to 150.000 mPas

Specification

鑒鑒크싻싻홱홱회회쥡쥡캄캄캥캥크慙慙쥠쥠크템템홱홱툭툭慙慙캥캥홱홱크빔빔慙慙慘慘캥캥캣캣慙慙투투투투홱홱캣캣크탬탬크窪窪포포탑탑밗밗쥡쥡크크크크크크크크크크크크크크크크크크크鑒鑒鑒鑒크텍텍캥캥캄캄홱홱캣캣크텝텝峯峯홱홱쥑쥑회회쥠쥠회회쥑쥑칩칩캥캥회회慙慙慘慘캤캤크칩칩캣캣홱홱크칩칩훅훅칩칩회회투투칩칩쥐쥐투투홱홱크후후峯峯慙慙慘慘크빔빔후후캤캤캥캥慙慙툭툭홱홱캣캣’캤캤크템템홱홱峰峰후후홱홱캤캤캥캥얗얗

Digital High-Torque Overhead Stirrer with Remote Controller(HT-50T-Set)

Digital High-Torque Overhead Stirrer(HT-120T-Unit)

Clamp (CL200)

Digital FeedBack Control

Chrome-platedChuck

Stirrer Unit(HT-50T)


Stand (ST200)

Chrome-platedChuck

HT-50T/HT-120T Unit

Remote Digital Feedback Controller : Steady and Constant Stirring Speed against Viscosity Change of a Sample during ReactionPatented Jog-Shuttle Control System CE Certified

Application & FeaturesIdeal for Stirring Material of Viscosities Ranging from Light Watery Solutions to High-Viscosity Fluids.Remote Digital Feedback Controller : Steady and Constant Stirring Speed against Viscosity Change of a Sample during Reaction.Digital LCD Display with Back-Light Function. Over-Load Protection and Over-Heat Protection Functions for Motor.High Torque Stirring by 3,5 : 1 Ratio Worm-geared Motor.Smooth Start and Change of the Stirring Speed.Storage Function, Alarm, Timer. The Position (Height) of Impeller is Adjustable.Locking Mode supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)Chrome-plated & Stainless Steel Chuck-Prevention from Corrosion.Patented Jog-Shuttle Control System. CE Certified.

Remote Controller




Model HT-50T HT-120TStirring Capacity (H 2O) Max. 40 Lit. Max. 60 Lit.Maximum Viscosity 100.000 mPas 150.000 mPasMotor Rating (Input / Output) 83 / 75 W ( 1 / 10 HP) 130 / 120 W ( 1 / 6 HP)Maximum Torque 300 Ncm 500 NcmMax. Shaft Diameter 10 mmSpeed Range 50 ~ 1.000 rpmMotor 3,5 : 1 Ratio Worm-Geared Motor

Controller Digital Feedback Controller with Jog Shuttle Switch (Turn + Push) Remote type

Cable Length of Remote Controller 1,8 mDisplay Digital LCD Display with Back-Light Function


Ambient Temp. Range 0 ~ 40


80 %

Safety Device Over Load & Heat Protector for MotorDimension (w d h) (mm) 155 180 110 155 230 110Weight* 3,5 kg 4 kg

Others


Storage Function (RPM, Timer)Locking Mode (Jog-Shuttle Input disabled)


Packing Dimension (w d h) (mm) 580 340 230Gross Weight 5 kg 8 kgPower Consumption 75 W 120 WPower plug type Hybrid E+FPower Supply** AC 230 V, 50 / 60 Hz



St ir rer , Overhead/ Accessories St

Standard Accessories for WiseStir Overhead Stirrers

witeg Stirring Impeller for Overhead Stirrer, Stainless Steel #304

Specially designed Stainless Steel #304 (High-grade) usedExcellent Resistance of Acids, Chemicals, Corrosion and High TemperatureUniversal-Types and Wide-Ranges

For Both High Speed and High Torque Models

(1) Propeller-types, 3 Bladed, Rod 8 L500/650 mm, Blade 50/60/80/100 mm

DH.WOS501010 Impeller, PL010, #304, 8 L500 mm Rod, 50 mm Blade DH.WOS501011 Impeller, PL011, #304, 8 L500 mm Rod, 60 mm BladeDH.WOS501012 Impeller, PL012, #304, 8 L650 mm Rod, 80 mm BladeDH.WOS501013 Impeller, PL013, #304, 8 L650 mm Rod, 100 mm Blade

(2) Propeller-types, 4 Bladed, Rod 8 L500/650 mm, Blade 70/90/100 mm

DH.WOS501015 Impeller, PL015, #304, 8 L500 mm Rod, 70 mm BladeDH.WOS501016 Impeller, PL016, #304, 8 L650 mm Rod, 90 mm BladeDH.WOS501017 Impeller, PL017, #304, 8 L650 mm Rod, 100 mm Blade

(3) Diamond-types, 4 Bladed, Rod 8 L500/650 mm, Blade 90/100 mm

DH.WOS501020 Impeller, PL020, #304, 8 L500 mm Rod, 90 mm BladeDH.WOS501021 Impeller, PL021, #304, 8 L650 mm Rod, 100 mm Blade

(4) Centrifugal-type, 2 Bladed, Rod 8 L500 mm, Blade 100 mm

DH.WOS501025 Impeller, PL025, #304, 8 L500 mm Rod, 100 mm Blade

(5) Teflon Coated Centrifugal-type, 2 Bladed, Rod 8 L500/650 mm, Blade 90/120 mm


(6) Anchor-types, 2 Bladed, Rod 8 L500/650 mm, Blade 70/90 mm


For High Torque Models (HT-AX, HT-DX, HT-T)

(1) Propeller-types, 3 Bladed, Rod 10 L500/650/800 mm, Blade 60/80/100 mm

DH.WOS501111 Impeller, PL111, #304, 10 L500 mm Rod, 60 mm BladeDH.WOS501112 Impeller, PL112, #304, 10 L650 mm Rod, 80 mm BladeDH.WOS501113 Impeller, PL113, #304, 10 L650 mm Rod, 100 mm Blade

(2) Propeller-types, 4 Bladed, Rod 10 L650 mm, Blade 90/100 mm


(3) Diamond-types, 4 Bladed, Rod 10 L650 mm, Blade 100 mm

DH.WOS501121 Impeller, PL121, #304, 10 L650 mm Rod, 100 mm Blade

(6) Anchor-types, 2 Bladed, Rod 10 L650/800 mm, Blade 90/140 mm


Please Note!

Rod or Blade of other Specifications are Available Upon Customer s Request.

(2) Propeller-type 4 Bladed

(3) Diamond-type 4 Bladed

(4) Centrifugal-type 2 Bladed

(5) Teflon Coated Centrifugal-type

(6) Anchor-type 2 Bladed

(1) Propeller-type 3 Bladed

www.witeg.de 157

StSt ir rer , Overhead/ Accessories

witeg WiseStir High-Quality, Stainless Steel (#304) Rod for Plate Stand, 16/23 mm

DH.WOS502001 Stainless steel Rod, RD501, 16 h 800 mm, non-screwDH.WOS502002 Stainless steel Rod, RD502, 16 h 1.000 mm, non-screwDH.WOS502003 Stainless steel Rod, RD503, 16 h 1.200 mm, non-screw

DH.WOS502011 Stainless steel Rod, RD511, 16 h 800 mm, screwDH.WOS502012 Stainless steel Rod, RD512, 16 h 1.000 mm, screwDH.WOS502013 Stainless steel Rod, RD513, 16 h 1.200 mm, screw

DH.WOS502021 Stainless steel Rod, RD521, 23 h 800 mm, screwDH.WOS502022 Stainless steel Rod, RD522, 23 h 1.000 mm, screwDH.WOS502023 Stainless steel Rod, RD523, 23 h 1.200 mm, screw

Clamp (CL200)

High-Quality Plate-type Stand with Support Rod. Silicon Rubber Pad adhered.Wide and Thick Steel Plate for Safety Mechanism.Support Rod made of Stainless Steel specially designed.

WiseStir Premium Plate Stand, High Quality, with Stainless Steel Rod 16/23 mm

騏騏窩窩鑑鑑크ST110 騏騏窪窪鑑鑑크ST120

騏騏탉탉鑑鑑크ST200 騏騏탐탐鑑鑑크KA1177

WiseStir , Heavy Duty Safety Stand, High Safety, with Stainless Steel Rod 23 mmNever Fall Down by Safety Mechanism. High-Safety H-/U-type Stand with Support Rod.Provides Sturdy Support for Stirrers during Mixing Procedure.Support Rod made of Stainless Steel specially designed.Adjustable Foot Distance. (ST200)

(5) “Witeg” Basic Rubber / Metal Coupling, for 6~10 mm Shafts 1445000 Coupling, W1-COR-6, for 6~8 mm Shafts1445010 Coupling, W1-COR-8, for 8~10 mm Shafts

(6) Heavy-duty Metal Coupling포 for 6~ 14 mm Shafts

KG.40477 Coupling, Metal, PKK-10 , for 6~8 mm ShaftsKG.40478 Coupling, Metal, PKK-16 , for 12~14 mm Shafts

(5) Basic-type Coupling

(6) Heavy-duty Metal Coupling


DH.WOS501510 (1) Standard Plate Stand, ST110, for Stirrer and Homogenizer

16 h 800 mm Rod, RD 501, 20 35 cm Plate, with Silicone Pad

DH.WOS501515 (2) Wide Plate Stand, ST120, for Stirrer and Homogenizer

23 h 1.000 mm Rod, RD 522, 30 40 cm Plate, with Silicone Pad

DH.WOS501520 (3) Deluxe Safety Stand, ST200, H-type 23 h 1.200 mm Rod, 39 up to 75 cm Stand Base

DH.WOS1177 (4) Safety Stand, KA1177, U-type 23 h 800 mm Rod, 34 29 cm Stand Base

Aluminum Clamp for Stirrer or HomogenizerDH.WOS502020 High Quality Clamp, CL200

Cast Aluminum, Grip Capacity, 23 mm for Stand/Rod


Steel Retort Base Duo Stand, up to 16 Rods, for 2 RodsNonskid Feet equipped, with Hinged Screw M6, Rod Excluded

Can Fix Rods up to 2 ea (Below 16 mm鑑크크크크크Stand Thickness : 8 mm


US.2040 Stand, US2040, r =150mmUS.2041 Stand, US2041, r =185mm

r

witeg WiseStir , Flexible Coupling for Safety Stirring, Up to 14 mm Shafts

Stainless Steel Rod

Stand Base


St ir rer , Overhaed/ Select ion GuideSt

WiseStir Digital Overhead Stirrer Product Line / Selection Guide

Standard Viscosity (Unit: mPas) Material

Water

Milk

Soybean oil

Varnish

Lacquer

Honey

Standard Viscosity

Standard Viscosity

Ketchup

Standard Viscosity

Mustard

Corn Syrup

Standard Viscosity

Peanut Butter

Viscosity

1

3

160

500

1.000

3.000

10.000

15.000

30.000

50.000

70.000

100.000

150.000

250.000

Recommended Models

HS-30DHS-50AHS-30T HS-100D

HS-120AHS-100T HT-50DX

HT-50AXHT-50T

HT-120DXHT-120AXHT-120T

* Weight of Remote Controller = 2,5 kg** Other Specifications are Available Upon Customer's Request.

High Speed High Torque

Analog Model Digital Model Analog Model Digital Model

Integrated Controller Integrated Controller Remote Controller Integrated Controller Integrated Controller Remote Controller

HS-50A HS-120A HS-30D HS-100D HS-30T HS-100T HT-50AX HT-120AX HT-50DX HT-120DX HT-50T HT-120T

Max. Stirring Capacity (H 2O)

Max. Viscosity (mPas)

Motor Rating (Input / Output)

Max. Torque (Ncm) at Chuck

Max. Impeller Diameter (mm)

Speed Range (rpm)

Motor Rating (Input / Output)

Display

AmbientTemp.Range ( )Operating

Environment Max.PermissibleHumidity( 폅폅)

Safety Device

Body Dimension (w d h mm)

Body Weight (kg)

Others

Power Supply **

Controller

10.000

20 Lit.

50.000

10 Lit. 20 Lit. 10 Lit. 20 Lit. 40 Lit. 60 Lit. 40 Lit. 60 Lit. 40 Lit. 60 Lit.10 Lit.

10.000 50.000 10.000 50.000 100.000 150.000 100.000 150.000 100.000 150.000

83 / 75 W 130 / 120 W 83 / 75 W 130 / 120 W 83 / 75 W 130 / 120 W 83 / 75 W 130 / 120 W 83 / 75 W 130 / 120 W 83 / 75 W 130 / 120 W

85 145 85 145 85 145 300 500 300 500 300 500

8 10

200 ~ 3.000 50 ~ 1.000

Direct Driven Motor 3,5 : 1 Ratio Worm-Geared Motor

Analog Phase ControllerDigital Feedback

Controller with Jog ShuttleSwitch(Turn+Push)

Digital FeedbackController with Jog Shuttle

Switch(Turn+Push), Remote type

Analog Phase ControllerDigital Feedback Controller

with Jog Shuttle Switch(Turn+Push)

Digital Feedback Controllerwith Jog Shuttle Switch

(Turn+Push),Remote type

None Digital LCD (Timer, RPM & Power Bar-graph) None Digital LCD (Timer, RPM & Power Bar-graph)

0 ~ 40

80

Over Heat Protector formotor

Over Load & Heat Protector for motorOver Heat Protector for

motorOver Load & Heat Protector for motor

90 145 180 90 100 18090 180

13090 210

13090 180

13090 210

130155 180

110155 230

110

4,5 5,3 4,5 5,3 3 * 3,8* 3,5 4 3,5 4 3,5 4

- Smooth Start and Change of the Stirring Speed for stable running- Storage Function (RPM & Timer) : Only Digital Models

- Smooth Start and Change of the Stirring Speed for stable running- Storage Function (RPM & Timer) : Only Digital Models- Locking Mode (Jog-Shuttle Input disabled) : Only Digital Models- Alarm (Error Status and Timer-end) : Only Digital Models

AC 230 V, 50 / 60 Hz

www.witeg.de 159

StSt ir rer , Jar Tester

Model JT -M6 JT -M6C

Stirring Capacity 6 1 Liter Beakers

6 Paddler(Stainless steel Shaft)

6 L 400 mm 8 L 400 mm

Straight Blade w 75 h 25 mm

Motor DC 40W Geared Motor (10 : 1 ratio)

Speed 20 ~ 300 rpm

Controller Programmable Digital Feedback Controller with Jog-Shuttle Switch (Turn + Push)

Program Function 10 Steps, 6 Programs

Speed Accuracy 5 rpm

Florescent Lamp 20 W 6 (Independent Light Source for Each Sample)

Display Digital LCD with Back-Light Function

Timer 99 hr 59 min 59 sec (Programmable)

Dimension (w d h) (mm) 1.000 310 535

Safety Device Over Load & Over Heat Protector for motor

OthersCE Certified

PL(Product Liability) InsuranceStorage Function (RPM, Timer)

Packing Dimension (w d h) (mm) 1.120 430 740

Gross Weight 41,4 kg




witeg WiseStir JT-M6 Digital Jar Tester, 6-Paddle Stirrer for Flocculation Test, 300 rpmProgrammable Digital Feedback Control, 6 Impellers, 6 Indenpendent Light Source, up to 6 1 Lit. Beakers

Jar Tester (JT-M6)

Impellers( 6 L400 mm)


DH.WJT06010 Jar Tester, JT-M6, 6 L 400 mm Shaft,6 Impellers, 300 rpm

DH.WJT06020 Jar Tester, JT-M6C, 8 L 400 mm Shaft,6 Impellers, 300 rpm

Specification


Ideal for Flocculation Testing in Water Treatment Laboratories6 Independent Light Source for Each Stirring PointGeared DC Motor and Specially Designed Timing Belt UsedCE Certified


Ideal for Flocculation Testing in Water Treatment Laboratories.6 Independent Light Source for each Stirring Point.Digital Feedback Control using Microprocessor.Geared DC Motor and Specially Designed Timing Belt used.Stable and Accurate Stirring Speed by Feedback Control.Digital Display for RPM, Power Bar-Graph and Status.Digital LCD with Back-Light Function.Programmable Operation : 10 Step, 6 Programs.Over-Load Protection and Over-Heat Protection Functions for Motor.Storage Function for Set Values : RPM and Timer.CE Certified.

Digital Feedback Control System

Timing Belt


Ult rasonic, Cleaners Ul

Model WUC-A01H WUC-A02H WUC-A03H WUC-A06H WUC-A10H WUC-A22H

Capacity 1,2 Lit. 1,8 Lit. 3,3 Lit. 6 Lit. 10 Lit. 22 Lit.

Tank Size inner(w d h) (mm) 150 135 60 150 135 100 240 140 100 290 150 150 290 240 150 500 300 150

Heating Temp. 65 Fixed 65 Fixed ambient to 85 ambient to 85 ambient to 85 ambient to 85

Timer None 0~30 min. 0~30 min. 0~30 min. 0~30 min. 0~30 min.

Drain-Valve None None None None 1/2" NPT 1/2" NPT

HF-Peak Out 50 W 50 W 100 W 150 W 200 W 250 W

Frequency 28 KHz 28 KHz 40 KHz 40 KHZ 40 KHZ 40 KHz

Weight 1,8 kg 2,5 kg 4 kg 5,3 kg 6,2 kg 10 kgPacking Dimension (w d h) (cm)

20 20 19 20 20 24 32 20 29 37 22 35 43 32 36 64 38 37

Gross Weight 3 kg 4 kg 5 kg 6 kg 7 kg 11 kg

Power Consumption 140 W 140 W 290 W 340 W 540 W 760 W




DH.WUC.A01H Ultrasonic Cleaner, WUC-A01H, 1,2 Lit.DH.WUC.A02H Ultrasonic Cleaner, WUC-A02H, 1,8 Lit.DH.WUC.A03H Ultrasonic Cleaner, WUC-A03H, 3,3 Lit.DH.WUC.A06H Ultrasonic Cleaner, WUC-A06H, 6 Lit.DH.WUC.A10H Ultrasonic Cleaner, WUC-A10H, 10 Lit.DH.WUC.A22H Ultrasonic Cleaner, WUC-A22H, 22 Lit.

Basket is not Included

Stainless Steel Baskets (Optional)DH.WUC.B02 Basket, Wire, B02, for 1,8 Lit., (in)120 105 h 65 mmDH.WUC.B03 Basket, Wire, B03, for 3,3 Lit., (in)215 115 h 65 mmDH.WUC.B06 Basket, Wire, B06, for 6 Lit., (in)274 123 h 96 mmDH.WUC.B10 Basket, Wire, B10, for 10 Lit., (in)262 206 h 93 mmDH.WUC.B22 Basket, Wire, B22, for 22 Lit., (in)452 263 h 93 mm

Specification


Useful for Cleaning to Remove Dirt, Grease, Waxes and Oil from all Lab Instruments by Ultrasonic Frequency.Made of Stainless Steel, Finished Surface.Analog Controller, Timer, Temperature and Output Control.Temperature Range from Ambient to 85 . (1,2 & 1,8 Lit. : 65 Fixed)Convenient Preset Function : Heating and Timer.HF-Frequency : 40 kHz for WUC-A03 / 06 / 10 / 22H models and28 kHz for WUC-A01H / A02H models.Bottom-Mounted Drain. (WUC-A10H and WUC-A22H)Maximum 30minutes Set Cleaning Time. (Except WUC-A10H)

witeg WiseClean WUC Ultrasonic Cleaners with Analog Timer 폈 Temperature ControllerHighly Effective Cleaning, Stainless Steel, up to 85 , 0~30 min, 28/40 kHz Frequency

Stainless Steel Surface

Ultrasonic Cleaner(WUC-A10H)

Analog Control

(B22)

(B06)(B10)

(B02)

(B03)

Ultrasonic Cleaner(WUC-A06H)

Stainless Steel Wire Baskets(Optional)

www.witeg.de 161

UlUlt rasonic, Cleaners


DH.WUC.D06H Ultrasonic Cleaner, Digital, WUC-D06H, 6 Lit.DH.WUC.D10H Ultrasonic Cleaner, Digital, WUC-D10H, 10 Lit.DH.WUC.D22H Ultrasonic Cleaner, Digital, WUC-D22H, 22 Lit.

1 wire Basket Included

Stainless Steel Baskets (Spare)DH.WUC.B06 Basket, Wire, B06, for 6 Lit., (in)247 123 h 96 mmDH.WUC.B10 Basket, Wire, B10, for 10 Lit., (in)262 206 h 93 mmDH.WUC.B22 Basket, Wire, B22, for 22 Lit., (in)452 263 h 93 mm

witeg WiseClean WUC Digital Ultrasonic Cleaner-set, 6-/10-/22- Lit.with Wire Basket 폈 Lid포크and Timer Highly Effective Cleaning, Stainless Steel, up to 80 , 0~99 min., 40 kHz Frequency

Specification


Useful for Cleaning to Remove Dirt, Grease, Waxes and Oil from all Lab instruments by Ultrasonic Frequency.Microprocessor Control : Timer, Temperature and Output Control.Multi-Frequency Sonication Body.HF-Frequency : 40 kHzTemperature Range from Ambient to 80 Convenient Preset Function : Heating and Timer.Bottom - Mounted Drain. (WUC-D10H, WUC-D22H)Maximum 60minutes Set Cleaning Time.

Digital Ultrasonic Cleaner Set

Model WUC -D06H WUC - D10H WUC -D22H

Capacity (Liters) 6 10 22

Tank Size inner(w d h) (mm) 290 150 150 290 240 150 500 300 150

Heat temp. ambient to 80 ambient to 80 ambient to 80

Timer 0~60 min. 0~60 min. 0~60 min.

Drain-valve None 1/2" NPT 1/2" NPT

HF-peak out 140 W 210 W 280 W

Frequency 40 kHz 40 kHz 40 kHz

Weight 5,4 kg 7,3 kg 10,2 kg

Packing Dimension (w d h) (mm) 360 220 350 440 320 360 640 380 370

Gross Weight 6 kg 8 kg 11 kg

Power Consumption 510 W 690 W 980 W



(WUC-D10H) (WUC-D06H)

(WUC-D22H)

(B22)

(B06)(B10)

Stainless Steel Wire Baskets(included)

Remote Generator

Cable Length of Remote Generator

2,6 m

Power Consumption 600 W 900 W 1.200 W 1.500 W



Weight net 9 kg 10 kg 10 kg 10 kg


Ult rasonic, Cleaners Ul


DH.WUC.N30H Ultrasonic Cleaner, without Basket, WUC-N30H, 30 Lit.DH.WUC.N47H Ultrasonic Cleaner, without Basket, WUC-N47H, 47 Lit.DH.WUC.N60H Ultrasonic Cleaner, without Basket, WUC-N60H, 60 Lit.DH.WUC.N74H Ultrasonic Cleaner, without Basket, WUC-N74H, 74 Lit.

Wire Basket Included

Optional Stainless Steel Wire BasketsDH.WUC.B30 Basket, Wire, B30, for 30 Lit., 340 240 h 150 mmDH.WUC.B47 Basket, Wire, B47, for 47 Lit., 390 290 h 200 mm DH.WUC.B60 Basket, Wire, B60, for 60 Lit., 440 340 h 200 mm DH.WUC.B74 Basket, Wire, B74, for 74 Lit., 490 390 h 200 mm

witeg WiseClean WUC 30~74 Lit. Ultrasonic Cleaner, with Digital Remote GeneratorHighly Effective Cleaning, Stainless Steel, with LCD display & Timer up to 105 , 0~99 min, 40 kHz Frequency

Specification


Useful for Cleaning to Remove Dirt, Grease, Waxes and Oil from all Lab Instruments by Ultrasonic Frequency.Remote Generator : Power Control and Timer Function with LCD.BTL Sonicator Installed : Robust and Stable Running.Sweep Function can Realize Complete Cleaning by the Dispersion of Ultrasound.Auto Optimization of Frequence as various Water Level and Temperature.Foot Switch Control. HF-Frequency : 40 kHzTemperature Range from Ambient to 105 Supply Full Set with Lid, Foot Switch and Generator. (Basket excluded)Bottom - Mounted Drain.Maximum 99 minutes Set Cleaning Time.

47 Lit. Ultrasonic Cleaner.(WUC-N47H)

Optional Stainless Steel Wire Basket

RemoteGenerator

Wire Basket: Option


Model WUC- N30H WUC- N47H WUC- N60H WUC- N74H

Capacity (Lit.) 30 Lit. 47 Lit. 60 Lit. 74 Lit.

Tank Size inner(w d h) (mm) 400 300 250 450 350 300 500 400 300 550 450 300

Tank Size external(w d h) (mm) 480 380 400 530 430 450 580 480 450 630 530 450

Heat temp. ambient to 105 ambient to 105 ambient to 105 ambient to 105

Timer (min) 0~99 min. 0~99 min. 0~99 min. 0~99 min.

HF-peak out 600 W 900 W 1.200 W 1.500 W

HF-frequency 40 kHz 40 kHz 40 kHz 40 kHz


Weight net 26 kg 31 kg 36 kg 41 kg

Packing Dimension (w d h) (mm) 620 520 640 670 570 710 720 620 710 770 670 710

Gross Weight 32 kg 37 kg 42 kg 47 kg

Stirrers - AS LTD慙witeg峯WiseStir ÓMSH-APremium Hotplate Stirrer, Ceramic-Coated Plate PWM...

Documents

Transcript of Stirrers - AS LTD慙witeg峯WiseStir ÓMSH-APremium Hotplate Stirrer, Ceramic-Coated Plate PWM...