STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF · Output characteristics (TJ=175°C) Figure 6....
Transcript of STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF · Output characteristics (TJ=175°C) Figure 6....
This is information on a product in full production.
October 2013 DocID024361 Rev 4 1/22
22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
Trench gate field-stop IGBT, V series
600 V, 30 A very high speed
Datasheet - production data
Figure 1. Internal schematic diagram
Features• Maximum junction temperature: T
J = 175 °C
• Tail-less switching off
• VCE(sat)
= 1.85 V (typ.) @ IC
= 30 A
• Tight parameters distribution
• Safe paralleling
• Low thermal resistance
• Very fast soft recovery antiparallel diode
Applications• Photovoltaic inverters
• Uninterruptible power supply
• Welding
• Power factor correction
• Very high frequency converters
DescriptionThis device is an IGBT developed using an
advanced proprietary trench gate field stop
structure. The device is part of the V series of
IGBTs, which represent an optimum compromise
between conduction and switching losses to
maximize the efficiency of very high frequency
converters. Furthermore, a positive VCE(sat)
temperature coefficient and very tight parameter
distribution result in safer paralleling operation.
C (2, TAB)
G (1)
E (3)
TO-247 TO-3P1
2
3
12
3
13
TAB
D²PAK1
23
TAB
TO-220TAB
Table 1. Device summary
Order codes Marking Package Packaging
STGB30V60DF GB30V60DF D²PAK Tape and reel
STGP30V60DF GP30V60DF TO-220 Tube
STGW30V60DF GW30V60DF TO-247 Tube
STGWT30V60DF GWT30V60DF TO-3P Tube
www.st.com
Electrical ratings STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
2/22 DocID024361 Rev 4
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCES
Collector-emitter voltage (VGE
= 0) 600 V
IC
Continuous collector current at TC
= 25 °C 60 A
IC
Continuous collector current at TC
= 100 °C 30 A
ICP
(1)
1. Pulse width limited by maximum junction temperature.
Pulsed collector current 120 A
VGE
Gate-emitter voltage ±20 V
IF
Continuous forward current at TC
= 25 °C 60 A
IF
Continuous forward current at TC
= 100 °C 30 A
IFP
(1)Pulsed forward current 120 A
PTOT
Total dissipation at TC
= 25 °C 258 W
TSTG
Storage temperature range - 55 to 150 °C
TJ
Operating junction temperature - 55 to 175 °C
Table 3. Thermal data
Symbol Parameter Value Unit
RthJC
Thermal resistance junction-case IGBT 0.58 °C/W
RthJC
Thermal resistance junction-case diode 2.08 °C/W
RthJA
Thermal resistance junction-ambient 50 °C/W
DocID024361 Rev 4 3/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Electrical characteristics
2 Electrical characteristics
TJ
= 25 °C unless otherwise specified.
Table 4. Static characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
V(BR)CES
Collector-emitter
breakdown voltage
(VGE
= 0)
IC
= 2 mA 600 V
VCE(sat)
Collector-emitter saturation
voltage
VGE
= 15 V, IC
= 30 A 1.85 2.3
V
VGE
= 15 V, IC
= 30 A
TJ = 125 °C
2.15
VGE
= 15 V, IC
= 30 A
TJ = 175 °C
2.35
VF
Forward on-voltage
IF = 30 A 2 2.6 V
IF = 30 A, T
J = 125 °C 1.7 V
IF = 30 A, T
J = 175 °C 1.6 V
VGE(th)
Gate threshold voltage VCE
= VGE
, IC
= 1 mA 5 6 7 V
ICES
Collector cut-off current
(VGE
= 0)
VCE
= 600 V 25 μA
IGES
Gate-emitter leakage
current (VCE
= 0)
VGE
= ± 20 V 250 nA
Table 5. Dynamic characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
Cies
Input capacitance
VCE
= 25 V, f = 1 MHz,
VGE
= 0
- 3750 - pF
Coes
Output capacitance - 120 - pF
Cres
Reverse transfer
capacitance
- 77 - pF
Qg
Total gate charge
VCC
= 480 V, IC
= 30 A,
VGE
= 15 V, see Figure 29
- 163 - nC
Qge
Gate-emitter charge - 28 - nC
Qgc
Gate-collector charge - 72 - nC
Electrical characteristics STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
4/22 DocID024361 Rev 4
Table 6. IGBT switching characteristics (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit
td(on)
Turn-on delay time
VCE
= 400 V, IC
= 30 A,
RG
= 10 Ω, VGE
= 15 V,
see Figure 28
- 45 - ns
tr
Current rise time - 16 - ns
(di/dt)on
Turn-on current slope - 1500 - A/μs
td(off
) Turn-off delay time - 189 - ns
tf
Current fall time - 19 - ns
Eon
(1)
1. Energy losses include reverse recovery of the diode.
Turn-on switching losses - 383 - μJ
Eoff
(2)
2. Turn-off losses include also the tail of the collector current.
Turn-off switching losses - 233 - μJ
Ets
Total switching losses - 616 - μJ
td(on)
Turn-on delay time
VCE
= 400 V, IC
= 30 A,
RG
= 10 Ω, VGE
= 15 V,
TJ
= 175 °C, see Figure 28
- 42 - ns
tr
Current rise time - 17 - ns
(di/dt)on
Turn-on current slope - 1337 - A/μs
td(off
) Turn-off delay time - 193 - ns
tf
Current fall time - 32 - ns
Eon
(1)Turn-on switching losses - 794 - μJ
Eoff
(2)Turn-off switching losses - 378 - μJ
Ets
Total switching losses - 1172 - μJ
Table 7. Diode switching characteristics (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit
trr
Reverse recovery time
IF = 30 A, V
R = 400 V,
di/dt=1000 A/μs, V
GE = 15 V,
(see Figure 28)
- 53 - ns
Qrr
Reverse recovery charge - 384 - nC
Irrm
Reverse recovery current - 14.5 - A
dIrr/
/dt
Peak rate of fall of reverse
recovery current during tb
- 788 - A/μs
Err
Reverse recovery energy - 104 - μJ
trr
Reverse recovery time
IF = 30 A, V
R = 400 V,
di/dt=1000 A/μs, V
GE = 15 V,
TJ = 175 °C, (see Figure 28)
- 104 - ns
Qrr
Reverse recovery charge - 1352 - nC
Irrm
Reverse recovery current - 26 - A
dIrr/
/dt
Peak rate of fall of reverse
recovery current during tb
- 310 - A/μs
Err
Reverse recovery energy - 407 - μJ
DocID024361 Rev 4 5/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Electrical characteristics
2.1 Electrical characteristics (curves) Figure 2. Power dissipation vs. case
temperatureFigure 3. Collector current vs. case temperature
Figure 4. Output characteristics (TJ=25°C) Figure 5. Output characteristics (TJ=175°C)
Figure 6. VCE(sat) vs. junction temperature Figure 7. VCE(sat) vs. collector current
Ptot
150
100
50
00 50 100
(W)
25 75 125
200
150 175 TC(°C)
250
AM17409v1IC
30
20
10
00 50 TC(°C)100
(A)
25 75 125
40
50
150 175
60
AM17410v1
IC
80
60
20
00 1 3
(A)
2 4
100
VCE(V)
409V
11V
13VVGE=15V120
AM17411v1
IC
80
60
20
00 1 3
(A)
2 4
100
120
VCE(V)
40
9V
11V
13V
7V
VGE=15V
AM17412v1
VCE(sat)
2.0
1.8
1.4
1.2-50 0 100
(V)
50 150
2.2
2.4
TC(°C)
1.6
2.6
2.8
VGE=15VIC=60A
IC=30A
IC=15A
3.0
3.2
AM17413v1
1.6
1.4
1.0
0.80 10 3020 40
1.8
2.0
IC(A)
1.2
2.2
2.4
VGE=15V Tj=175°C
Tj=25°C
Tj=-40°C
6050
VCE(sat) (V)
2.6
2.8
3.0
3.2
AM17414v1
Electrical characteristics STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
6/22 DocID024361 Rev 4
Figure 8. Collector current vs. switching frequency
Figure 9. Forward bias safe operating area
Figure 10. Transfer characteristics Figure 11. Diode VF vs. forward current
Figure 12. Normalized VGE(th) vs junction temperature
Figure 13. Normalized V(BR)CES vs. junction temperature
IC
40
30
10
01
(A)
10
50
60
f(kHz)
20
70
80TC=80°C
TC=100°C
rectangular current shape,(duty cycle=0.5, Vcc= 400V Rg=10Ω,
Vge=0/15V, Tj=175 °C)
AM17415v1
IC
100
10
0.1
0.011
(A)
10 VCE(V)
1
10μs
100μs
1ms
100
Single pulse, Tc=25°C
Tj<175°C, VGE=15V
AM17416v1
IC
80
60
20
07
(A)
8 VGE(V)
40
Tj=175°C
Tj=25°C
Tj=-40°C
9
100
10 11
AM17417v1VF
1.9
1.110
(A)
20 IF(A)
1.5
Tj=175°C
Tj=25°C
Tj=-40°C
30
2.3
40 50 60
AM17418v1
VGE(th)
0.8
0.6-50
(norm)
TC(°C)
0.7
0
0.9
1.0
50 100 150
VCE=VGE
IC=1mA
AM17419v1V(BR)CES
1.1
0.9-50
(norm)
TC(°C)
1.0
0 50 100 150
IC=2mA
AM17420v1
DocID024361 Rev 4 7/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Electrical characteristics
Figure 14. Capacitance variations Figure 15. Gate charge vs. gate-emitter voltage
Figure 16. Switching losses vs. collector current
Figure 17. Switching losses vs. gate resistance
Figure 18. Switching losses vs. junction temperature
Figure 19. Switching losses vs. collector emitter voltage
C(pF)
100.1 VCE(V)
1000
1 10
100
10000
Cies
CoesCres
AM17421v1VGE(V)
00 Qg(nC)50 100
2
150 175
4
6
8
10
12
14
16
25 12575
AM17422v1
E(μJ)
00 IC(A)
400
10 20
200
600
30 40
VCC=400V, VGE=15VRg=10Ω, Tj=175°C
800
1000
1200
1400
Eon
Eoff
50 60
1600
1800
2000
AM17423v1E(μJ)
0 Rg(Ω)
400
10 20200
600
30 40
VCC=400V, VGE=15VIC=30A, Tj=175°C
800
1000
1200Eon
Eoff
AM17424v1
E(μJ)
25 TJ(°C)
200
50 75100
300
100 125
VCC=400V, VGE=15VIC=30A, Rg=10Ω
400
500
600
Eon
Eoff
1500
700
800
AM17425v1E(μJ)
150 VCE(V)
500
200 250100
900
300 350
VGE=15V, Tj=175°C
IC=30A, Rg=10Ω
Eon
Eoff
300
700
1100
400 450
AM17426v1
Electrical characteristics STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
8/22 DocID024361 Rev 4
Figure 20. Switching times vs. collector current Figure 21. Switching times vs. gate resistance
Figure 22. Reverse recovery current vs. diode current slope
Figure 23. Reverse recovery time vs. diode current slope
Figure 24. Reverse recovery charge vs. diode current slope
Figure 25. Reverse recovery energy vs. diode current slope
t(ns)
0 IC(A)10 2010
30 40
VCC=400V,
Tj=175°C,
VGE=15V
Rg=10Ω
tdoff
tdon
100
tr
tf
50 60
AM17427v1t(ns)
0 Rg(Ω)10 2010
30 40
VCC=400V,
Tj=175°C,
VGE=15V
IC=30A
tdoff
tdon100
tr
tf
1000
AM17428v1
Irm(A)
0 di/dt (A/μs)500
10
1000
Vr=400V
IF=30A
Tj=175°C
20
30
40
01500
Tj=25°C
AM17429v1trr(μs)
0 di/dt (A/μs)500 1000 1500 2000
Vr=400V
IF=30A
Tj=175°C
50
100
150
200
02500
Tj=25°C
AM17430v1
Qrr(nC)
0 di/dt (A/μs)500 1000 1500 2000
Vr=400V
IF=30ATj=175°C
500
1000
1500
2000
02500
Tj=25°C
AM17431v1Err(μJ)
0 di/dt (A/μs)500 1000 1500 2000
Vr=400V
IF=30A
Tj=175°C
200
400
600
800
1000
02500
Tj=25°C
AM17432v1
DocID024361 Rev 4 9/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Electrical characteristics
Figure 26. Thermal data for IGBT
Figure 27. Thermal data for diode
10-5
10-4
10-3
10-2
10-1
tp(s)10
-2
10-1
K
0.2
0.05
0.02
0.01
0.1
Zth=k Rthj-c
δ=tp/t
tp
t
Single pulse
δ=0.5
ZthTO2T_B
Test circuits STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
10/22 DocID024361 Rev 4
3 Test circuits
Figure 28. Test circuit for inductive load switching
Figure 29. Gate charge test circuit
Figure 30. Switching waveform Figure 31. Diode recovery time waveform
AM01504v1 AM01505v1
AM01506v1
90%
10%
90%
10%
VG
VCE
ICTd(on)
TonTr(Ion)
Td(off)
Toff
Tf
Tr(Voff)
Tcross
90%
10%
AM01507v1
IRRM
IF
di/dt
trr
ta tb
Qrr
IRRM
t
VF
dv/dt
DocID024361 Rev 4 11/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Package mechanical data
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
Table 8. D²PAK (TO-263) mechanical data
Dim.mm
Min. Typ. Max.
A 4.40 4.60
A1 0.03 0.23
b 0.70 0.93
b2 1.14 1.70
c 0.45 0.60
c2 1.23 1.36
D 8.95 9.35
D1 7.50
E 10 10.40
E1 8.50
e 2.54
e1 4.88 5.28
H 15 15.85
J1 2.49 2.69
L 2.29 2.79
L1 1.27 1.40
L2 1.30 1.75
R 0.4
V2 0° 8°
Package mechanical data STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
12/22 DocID024361 Rev 4
Figure 32. D²PAK (TO-263) drawing
Figure 33. D²PAK footprint(a)
a. All dimensions are in millimeters
0079457_T
16.90
12.20
9.75
3.50
5.08
1.60
Footprint
DocID024361 Rev 4 13/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Package mechanical data
Table 9. TO-220 type A mechanical data
Dim.mm
Min. Typ. Max.
A 4.40 4.60
b 0.61 0.88
b1 1.14 1.70
c 0.48 0.70
D 15.25 15.75
D1 1.27
E 10 10.40
e 2.40 2.70
e1 4.95 5.15
F 1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L 13 14
L1 3.50 3.93
L20 16.40
L30 28.90
∅P 3.75 3.85
Q 2.65 2.95
Package mechanical data STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
14/22 DocID024361 Rev 4
Figure 34. TO-220 type A drawing
0015988_typeA_Rev_S
DocID024361 Rev 4 15/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Package mechanical data
Table 10. TO-247 mechanical data
Dim.mm.
Min. Typ. Max.
A 4.85 5.15
A1 2.20 2.60
b 1.0 1.40
b1 2.0 2.40
b2 3.0 3.40
c 0.40 0.80
D 19.85 20.15
E 15.45 15.75
e 5.30 5.45 5.60
L 14.20 14.80
L1 3.70 4.30
L2 18.50
∅P 3.55 3.65
∅R 4.50 5.50
S 5.30 5.50 5.70
Package mechanical data STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
16/22 DocID024361 Rev 4
Figure 35. TO-247 drawing
0075325_G
DocID024361 Rev 4 17/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Package mechanical data
Table 11. TO-3P mechanical data
Dim.mm
Min. Typ. Max.
A 4.60 5
A1 1.45 1.50 1.65
A2 1.20 1.40 1.60
b 0.80 1 1.20
b1 1.80 2.20
b2 2.80 3.20
c 0.55 0.60 0.75
D 19.70 19.90 20.10
D1 13.90
E 15.40 15.80
E1 13.60
E2 9.60
e 5.15 5.45 5.75
L 19.50 20 20.50
L1 3.50
L2 18.20 18.40 18.60
øP 3.10 3.30
Q 5
Q1 3.80
Package mechanical data STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
18/22 DocID024361 Rev 4
Figure 36. TO-3P drawing
8045950_A
DocID024361 Rev 4 19/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Packaging mechanical data
5 Packaging mechanical data
Table 12. D²PAK (TO-263) tape and reel mechanical data
Tape Reel
Dim.mm
Dim.mm
Min. Max. Min. Max.
A0 10.5 10.7 A 330
B0 15.7 15.9 B 1.5
D 1.5 1.6 C 12.8 13.2
D1 1.59 1.61 D 20.2
E 1.65 1.85 G 24.4 26.4
F 11.4 11.6 N 100
K0 4.8 5.0 T 30.4
P0 3.9 4.1
P1 11.9 12.1 Base qty 1000
P2 1.9 2.1 Bulk qty 1000
R 50
T 0.25 0.35
W 23.7 24.3
Packaging mechanical data STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
20/22 DocID024361 Rev 4
Figure 37. Tape
Figure 38. Reel
P1A0 D1
P0
F
W
E
D
B0K0
T
User direction of feed
P2
10 pitches cumulativetolerance on tape +/- 0.2 mm
User direction of feed
R
Bending radius
B1
For machine ref. onlyincluding draft andradii concentric around B0
AM08852v1
Top covertape
A
D
B
Full radius G measured at hub
C
N
REEL DIMENSIONS
40mm min.
Access hole
At slot location
T
Tape slot in core fortape start 25 mm min.width
AM08851v2
DocID024361 Rev 4 21/22
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF Revision history
6 Revision history
Table 13. Document revision history
Date Revision Changes
14-Mar-2013 1 Initial release.
03-May-2013 2 Added: Section 2.1: Electrical characteristics (curves)
04-Jun-2013 3
Added minimum and maximum values for VGE(th)
in Table 4: Static
characteristics.
08-Oct-2013 4 Updated title, features and description in cover page.
STGB30V60DF, STGP30V60DF, STGW30V60DF, STGWT30V60DF
22/22 DocID024361 Rev 4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFESUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONSOR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS ATPURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT ISEXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRYDOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED AREDEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com