Sterlite_12!24!48f g652d Adss 5kn Ofc Specs
-
Upload
harrison-hayes -
Category
Documents
-
view
7 -
download
0
description
Transcript of Sterlite_12!24!48f g652d Adss 5kn Ofc Specs
-
www.sterliteoptical.com
Sterlite Optical Technologies Limited, S. No. 68/1, Madhuban Dam Road, Rakholi, Union Territory of Dadra & Nagar Haveli, INDIA, Phone : +91.260.5512053 / 6612070,
Fax : +91.260.2644078, URL : www.sterliteoptical.com 1/5
Doc No. : SOTL/HOE/048/C3/5
Issue No. : 01
Date : 01/09/2008
TECHNICAL SPECIFICATION FOR STERLITE SINGLE SHEATH ADSS CABLE
Typical cable cross section for 48 fibers
Design and special features
Excellent optical, mechanical and environmental characteristics.
Optical Fibers & Loose tubes are distinctly colour coded for easy identification during testing & splicing.
Standard multi loose tube / buffer design permits easy access to individual fiber
S-Z stranded, loose tube design isolates fibres from installation and environmental rigor & facilitates mid span access
Ripcord provides an easy means to remove the jacket for accessing the buffer tubes
FIBRE TYPE STANDARD SINGLE MODE FIBER (ITU-T G652D) LOOSE TUBE MATERIAL PBT CENTRAL STRENGTH MEMBER FRP PERIPHERAL STRENGTH MEMBER ARAMID YARN TAPE WATER BLOCKING TAPE OUTER JACKETING MATERIAL HDPE
HDPE
CORE WRAPPING
FILLER
12 FIBERS LOOSE TUBE
CENTRAL STRENGTH MEMBER
WATER SWELLABLE ELEMENT
RIP CORDS
ARAMID YARN
-
www.sterliteoptical.com
Sterlite Optical Technologies Limited, S. No. 68/1, Madhuban Dam Road, Rakholi, Union Territory of Dadra & Nagar Haveli, INDIA, Phone : +91.260.5512053 / 6612070,
Fax : +91.260.2644078, URL : www.sterliteoptical.com 2/5
PRINTING DETAILS
To externally identify the cable, the following printing by Hot foil indentation technique , which is worldwide acceptable shall be marked at 1-meter intervals, in white. Embossing as per customer request /Printing can be provided.
STERLITE SM 48F ADSS PHONE SYMBOL 09 2008
The accuracy of marking shall be 0.5%. Occasional loss of printing & remarking shall be as per Bell core GR 20 and this super cedes the earlier markings.
DRUMS
The cables will be shipped on treated wooden drums, battened around the circumference for protections. Inner and outer ends of the cable will be accessible for testing and each end will be end capped. A direction of rotation arrow is marked on the drum together with the markings detailed below.
DRUM MARKINGS The individual cable drums shall carry the following markings
- Manufacturers Name - Drum Number / Cable Identification Number - Size of the Cable - Cable Length - Type of Fiber - Gross weight in kgs - Net weight in kgs - Arrow of Rotation
PACKING Delivery Length: 3000 Meters (5 %)
IDENTIFICATION
Fibers: Fiber 1
Fiber 2 Fiber 3 Fiber 4 Fiber 5 Fiber 6 Fiber 7
Fiber 8 Fiber 9 Fiber 10
Fiber 11
Fiber 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Rose Aqua
Color code for buffer tubes in each layer*: Tube 1
Tube 2 Tube 3 Tube 4 Tube 5 Tube 6 Tube 7
Tube 8 Tube 9 Tube 10
Tube 11
Tube 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Rose Aqua
If the numbers of tubes exceeds 12 tubes in one layer, this code will be repeated
-
www.sterliteoptical.com
Sterlite Optical Technologies Limited, S. No. 68/1, Madhuban Dam Road, Rakholi, Union Territory of Dadra & Nagar Haveli, INDIA, Phone : +91.260.5512053 / 6612070,
Fax : +91.260.2644078, URL : www.sterliteoptical.com 3/5
Characteristics of optical single mode fibers E9/125 according to ITU-T G.652D
Mode field diameter at 1310 nm [m] 9.20.5 Cladding diameter [m] 125.01 Coating diameter [m] 245 10 Attenuation at 1310 nm [dB/km] 0.38 Attenuation at 1383 nm [dB/km] 0.32 Attenuation at 1550 nm [dB/km] 0.25 Attenuation at 1625 nm [dB/km] 0.28 Dispersion in the range 1285 to 1330 nm [ps/(nmkm)] 3.5 Dispersion at 1550 nm [ps/(nmkm)] 17.5 Cable cutoff wavelength (cc) [nm] 1260 PMD coefficient (PMD Q) [ps/km] 0.2
Technical and environmental cable characteristics
Max. Tensile load short term EN 187101, IEC 60794-1-2.E1, attenuation increase reversible
[N] 5000 N
Max. Tensile load long term EN 187101, IEC 60794-1-2-E1, no attenuation increase
[N] 1/3 of short term
Crush performance EN 187101, IEC 60794-1-2-E3, no attenuation increase
[N/10 cm] 2000
Bending performance Short term- Long term-
10, (15 x D)
Temperature range Installation Operation Transport & Storage EN 187101, IEC 60794-1-2-F1, no attenuation increase
[C] [C] [C]
-20... +70 -20... +70 -20... +70
Water penetration IEC 60794-1-2-F5,
[m]