STERLING SAW BLADES - Stanley Industries€¦ · Hand Hacksaw Blades, Hacksaw Frames ... effective...
Transcript of STERLING SAW BLADES - Stanley Industries€¦ · Hand Hacksaw Blades, Hacksaw Frames ... effective...
MANUFACTURED BY DIAMOND SAW WORKS, INC.
CATALOG NO. PC 16
STERLING® SAW BLADES
“Quality at its Finest”
STERLING®
INNOVATORS OF WORLD-CLASS SAW BLADES SINCE 1890
Diamond Saw Works, Inc. (800)828-1180
NXT-ct™ Bandsaw Blades ....................................................... 3 Mach 12™ Bandsaw Blades ....................................................... 4 Excel™, Contour Band Bandsaw Blades ........................................... 5 Cut Master™, Kerf-Plus™ Bandsaw Blades & Accessories ............. 6 New-Wave™ Bandsaw Blades, Portable Bands ............................... 7 Super-Weld MX™ Bandsaw Blades ....................................................... 8 Tri-Temp, Carbon Bandsaw Blades ....................................................... 9 Friction, X-tra Duty .032™ , ETS Bandsaw Blades .............................. 10 Timber Master TK™ Collection ....................................................... 11 Pallet Reclaim Collection ....................................................... 12 Reciprocating Blades ................................................................... 13-14 Reciprocating Blade Box Displays ....................................................... 15 Air Saw Blades ................................................................... 16 Glas-Fab™ Collection, Carbide Grit Collection ............................... 17 Slik-Kote™ Collection, Jig Saw Blades ............................... 18 Jig Saw Blades ................................................................... 19 Hand Hacksaw Blades, Hacksaw Frames ........................................... 20 Power Hacksaw Blades, Porta-Hack™, PVC/ABS ............................... 21 Hole Saws (Bi-Metal and Carbide Tip) ........................................... 22 Hole Saw Accessories ................................................................... 23
TABLE OF CONTENTS
BAND SAW BLADE ORDERING INSTRUCTIONS
When ordering band saw blades and coil stock, please include the following information:
•Quantity •Product Number •Blade Length (feet + inches) •Blade Width •Blade Thickness •Teeth Per Inch •Set (Raker, Wavy, E.T.S.) •Style (Skip, Hook, Constant, Broach Tooth, Posi-Tooth, New Wave™) •Blade Type (specific brand name)
GUARANTEED TRIAL ORDER PROGRAM
Diamond Saw Works offers a Guaranteed Trial Order Program on all Sterling® band saw blade products. Upon review and approval of consumer applications we will provide a product on a paid trial basis. The purpose of this program is to allow all consumers the opportunity to try our products risk-free. Contact your local Sterling® representative with your application information so we may provide you with the right blade that will meet your performance expectations.
CARBIDE TIPPED BAND SAW BLADES
• NEWEST GRADE OF CARBIDE - For higher cutting speed, longer blade life and high heat and abrasion resistance. • UNIQUE, GROUND TOOTH FORM - Improves cutting accuracy and offers a higher quality, smoother finish. • IMPROVED, TEMPERED STEEL BACKER - Offers greater beam strength and extended blade fatigue life.
APPLICATION: For difficult machining materials such as Inconel, Hasteloy, Titanium, Nickel alloys, stainless steel, chrome alloys, tool steels and specialty steels. Available in triple chip or set tooth pattern. Set tooth for aluminum castings and foundry applica-tions.
ssenkcihTxhtdiW
sehcnI mm .I.P.T elytS .PDEkluB.oN
2/1520.
7.2106.
34
teSpihCelpirT
950349060349
4/3530.
9109.
33
pihCelpirTteS
570349670349
1530.
7209.
333/4
pihCelpirTteS
pihCelpirT
590349690349501349
4/1-1240.
4370.1
2/333/4
pihCelpirTpihCelpirTpihCelpirT
321349611349721349
2/1-1050.
1472.1
1/7.12/33/4
pihCelpirTpihCelpirTpihCelpirT
331349341349741349
2260.
4506.1
1/7.12/3
pihCelpirTpihCelpirT
271349081349
8/5-2260.
7606.1 1/7.1 pihCelpirT 312349
3260.
6706.1 8./1 pihCelpirT 712349
Available in coils and welded to length.
™
BAND SAW BLADES
TRIPLE CHIP
SET TOOTH
Diamond Saw Works, Inc. (800)828-1180 [email protected]
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
4/1-1240.
4370.1
2/33/44/6
REKARREKARREKAR
ISOPISOPISOP
615728157202572
618728187202872
2/1-1050.
1472.1
2/33/44/6
REKARREKARREKAR
ISOPISOPISOP
835723457254572
A/NA/NA/N
2360.
4506.1
2/33/4
REKARREKAR
ISOPISOP
4557285572
A/NA/N
MACH 12 BI-METAL M-51, 12° RAKE 10% COBALT EDGE Rc 69-70 TOOTH HARDNESS
•AGGRESSIVE 12° POSITIVE RAKE ANGLE - High positive rake angle provides faster cutting rates for increased production requirements without compromising band life. In addition, this feature allows the band saw machine and the blade to operate at a maximum level of efficiency.
•HIGH CHROME TEMPERED STEEL BACKING MATERIAL - Allows blade to absorb more heat, and increases blade life.
•VARIABLE PITCH - Dramatically reduces noise and vibration for longer tool life.
•OVERSIZE WIDTH - Increases beam strength and offers straighter cutting.
APPLICATION: A production cutting blade designed for faster cutting of exotic materials. Cuts solid or heavy walled materials which have work hardening or abrasive characteristics. Also for cutting exotic metals, super alloys and space age materials such as Inconel, Hasteloy, Titanium, Nickel alloys, Chrome-moly, stainless steel and tool or die steels. The high level of heat and abrasion resistance make this blade an extremely effective choice for faster cutting.
BAND SAW BLADES
™
Available in coil lengths or welded to length bands.
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
4/3530.
9109.
4/65/8
REKARREKAR
HCAORBHCAORB
2015230152
2025230252
1530.
7209.
32/33/44/64/65/85/86/01
REKARREKARREKARREKARREKARREKARREKARREKAR
KOOHISOPISOPHCAORB
ISOPHCAORB
ISOPHCAORB
7905201152311527115251152221520215252152
7915201252312527125251252222520225252252
4/1-1240.
4370.1
132/33/44/65/8
REKARREKARREKARREKARREKARREKAR
KOOHKOOHISOPISOPISOPISOP
014528215253152731520415254152
015528225253252732520425254252
2/1-1050.
1472.1
11/5.1
2/33/44/6
REKARREKARREKARREKARREKAR
KOOHISOPISOPISOPISOP
0245235152551527515206152
A/NA/NA/NA/NA/N
2050.
4572.1 1 REKAR KOOH 92452 A/N
2360.
4506.1
11/5.1
2/33/4
REKARREKARREKARREKAR
KOOHISOPISOPISOP
03452681527815288152
A/NA/NA/NA/N
8/5-2360.
8.6606.1
8./11/5.1
2/3
REKARREKARREKAR
ISOPISOPISOP
691528915299152
A/NA/NA/N
EXCEL
BAND SAW BLADES
The EXCELTM band saw blades feature a high tooth hardness (67- 69 RC) with an 8% cobalt M42 tool steel cutting edge. They are available in Broach tooth, Posi tooth and Hook tooth styles. The Broach tooth has a less aggressive zero degree rake angle that resists tooth strippage especially on smaller cross sections while retaining the high hardness and superior abrasion resistance needed for cutting high alloy, heat treated, or stainless steels. The Posi tooth and Hook tooth styles combine the high hardness and superior abrasion resistance qualities with an aggressive rake angle and a strong back angle to provide faster cuts on solid work pieces where tooth strippage is not a common occurrence.
The CONTOUR BANDTM saw blades feature a high hardness (67-69 RC) with an 8% cobalt M42 edge. They are available in narrow widths with Hook tooth, Constant tooth and Broach tooth styles for radius and straight cutting. The Hook tooth style combines an aggressive rake angle for faster cuts and is an excellent choice for aluminum and non-ferrous materials. The Constant tooth and Broach tooth have less aggressive zero degree rake angles that resist tooth strippage especially on smaller work pieces while retaining the high hardness and superior abrasion resistance needed for cutting high alloy, heat treated, or stainless steels.
CONTOUR BAND
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
4/1520.
4.606.
601/4141/81
REKARREKARREKAR
KOOHHCAORBHCAORB
413325133271332
416325163271632
4/1530.
4.609.
0141
REKARREKAR
TNATSNOCTNATSNOC
5033201332
5063201632
8/3520.
5.906. 01/41 REKAR HCAORB 82332 82632
8/3530.
5.909.
401
REKARREKAR
KOOHTNATSNOC
2133202332
2163202632
2/1520.
7.2106.
4601416/018/2101/4141/81
REKARREKARREKARREKARREKARREKARREKARREKAR
KOOHKOOH
TNATSNOCTNATSNOC
HCAORBHCAORBHCAORBHCAORB
6433223332333321433263332733323433244332
6463223632336321463263632736323463244632
2/1530.
7.2109.
36416/0101/41
REKARREKARREKARREKARREKAR
KOOHKOOH
TNATSNOCHCAORBHCAORB
7433284332553320633276332
7463284632556320663276632
Available in coils and welded to length.
Available in coils and welded to length.
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
1530.
7209. 4/6 REKAR ISOP 50502 50802
4/1-1240.
4370.1
3/44/6
REKARREKAR
ISOPISOP
0250212502
0280212802
2/1-1050.
1472.1
3/44/6
REKARREKAR
ISOPISOP
0350213502
A/NA/N
2360.
4506.1
3/44/6
REKARREKAR
ISOPHCAORB
0450214502
A/NA/N
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
1530.
7209.
3/44/6
REKARREKAR
ISOPISOP
0185251852
0195251952
4/1-1240.
4370.1
3/44/6
REKARREKAR
ISOPISOP
0285252852
0295252952
2/1-1050.
1472.1
3/44/6
REKARREKAR
ISOPISOP
0385253852
A/NA/N
2360.
4506.1 3/4 REKAR ISOP 04852 A/N
The new tooth design of this high hardness M-42 blade is ideally suited for cutting larger structural shapes such as I-Beam, Angle and thick wall tubing. A modified progressive close tolerance set pattern provides smoother finishes than a standard raker set. The tooth profile delivers aggressive cutting performance while resist-ing tooth strippage.
CUT MASTER BI-METAL M42
BAND SAW BLADES KERF-PLUS BI-METAL M42
KERF-PLUS™ is a high hardness M42 blade for cutting structure materials that tend to close into the cut. The wider kerf also helps prevent blade damage due to binding while cutting stacked or bundled structured beams and tubing. Recommended for use by production cutting houses and steel fabricators.
BANDSAW BLADE ACCESSORIES Magnetic Guide Alignment Tool Product No. 10010
The blade alignment tool is used to check and make sure the saw blade is square to the cut. This will im-prove your cutting accuracy. (Instructions included)
Tension Meter Product No. 10006
For use on band saw blades and/or power hack saw blades. The tension meter checks for proper blade ten-sion ensuring straighter cutting and longer blade life. The dial indicator provides you with a direct readout in P.S.I.
Available in coils and welded to length. Available in coils and welded to length.
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
4/1520.
4.646.
01/4141/81
YVAWYVAW
HCAORBHCAORB
6133281332
6163281632
8/3520.
5.946. 41/81 YVAW HCAORB 13332 13632
2/1020.
7.2105. 41/81 YVAW HCAORB 25332 25632
2/1520.
7.2146.
01/4141/81
YVAWYVAW
HCAORBHCAORB
9433215332
9463215632
4/3530.
9109.
5/86/018/2101/4141/81
YVAWYVAWYVAWYVAWYVAW
HCAORBHCAORBHCAORBHCAORBHCAORB
3143281432124324243262432
3173281732127324273262732
1530.
7209.
5/86/018/2101/41
YVAWYVAWYVAWYVAW
HCAORBHCAORBHCAORBHCAORB
66432274326743287432
66732277326773287732
4/1-1240.
4370.1
5/86/018/21
YVAWYVAWYVAW
HCAORBHCAORBHCAORB
825321353243532
828321383243832
2/1-1050.
1472.1 5/8 YVAW HCAORB 35532 A/N
2050.
4572.1 5/8 YVAW HCAORB 55532 A/N
2360.
4506.1 5/8 YVAW HCAORB 06532 A/N
BAND SAW BLADES
eziS .I.P.T teS .oN.dorP
sehcnI mm
"8/7-8'32/1020.
04117.21
05.
01418142
01/4141/8141/81
REKARREKARREKAR
YVAWREKAR
YVAWREKAR
00932309326093270932809324093250932
BLADES FOR PORTABLE BAND SAW MACHINES Blades for portable band saw machines are made of ma-trix II bi-metal blade material. Matrix II bi-metal blades provide excellent life in tough cutting applications.
Packaged 5 per box or 100 bulk
Available in coils and welded to length.
NEW WAVE BI-METAL The NEW WAVE™ band saw blade is specifically tailored for maintenance department saws, fabricators of lighter structurals, round and square tubing and other applications that can prove troublesome to saw blade users everywhere. The unique, group tooth set, combined with the Broach Tooth design, delivers smoother cuts with less noise and vibration. Because teeth are group set in varying degrees, each tooth protects adjacent teeth from taking too much stress load. This helps prevent tooth loss due to chipping and eventual strippage. NEW WAVE™ blades feature an 8% cobalt edge with 66-68 Rc tooth hardness. For use on horizontal or vertical band saw machines.
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
2/1020.
7.2105.
01418142
01/4141/81
REKARREKARREKAR
YVAWREKARREKAR
TNATSNOCTNATSNOCTNATSNOCTNATSNOC
HCAORBHCAORB
033325333204332933328333243332
036325363204632936328363243632
8/5230.
6108.
6/0101/41
REKARREKAR
HCAORBHCAORB
2733247332
2763247632
4/3530.
9109.
301414/65/86/018/2101/4141/81
REKARREKARREKARREKARREKARREKARREKARREKARREKAR
KOOHTNATSNOCTNATSNOC
HCAORBHCAORBHCAORBHCAORBHCAORBHCAORB
573320933259332704322143251432024322243232432
576320963259632707322173251732027322273232732
1530.
7209.
014/65/86/018/2101/41
REKARREKARREKARREKARREKARREKAR
TNATSNOCHCAORBHCAORBHCAORBHCAORBHCAORB
054322643276432074325743277432
057322673276732077325773277732
4/1-1240.
4370.1
2/33/43/44/65/86/01
REKARREKARREKARREKARREKARREKAR
ISOPHCAORB
ISOPHCAORBHCAORBHCAORB
515321253271532225327253203532
518321283271832228327283203832
BAND SAW BLADES SUPER WELD MX™ BI-METAL MATRIX II The SUPER WELD MXTM saw blades feature a tough 8% cobalt matrix tool steel edge with a (65-67 RC) tooth hardness. They are available in Constant tooth, Broach tooth, Hook tooth and Posi tooth styles and are an excellent choice for all common metal cutting applications. The Constant tooth and Broach tooth have less aggressive zero rake angles that resist tooth strippage especially on smaller work pieces. The Hook tooth and Posi tooth styles combine an aggressive rake angle for faster cuts and are excellent choices for solid work pieces and larger cross sections of materials.
Available in coils and welded to length.
VISIT US ON THE WEB AT: www.diamondsaw.com
www.sterlingsawblades.com
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'052.oNdorP
4/1520.
4.646.
0101/41
REKARREKAR
TNATSNOCHCAORB
0454107541
8/3520.
5.946.
344681
REKARREKARREKARREKARREKAR
PIKSPIKSKOOHKOOH
TNATSNOC
5854159541095410064102641
2/1520.
7.2146.
466014141816/018/2101/41
REKARREKARREKARREKARREKAR
YVAWREKARREKARREKARREKAR
KOOHKOOH
TNATSNOCTNATSNOCTNATSNOCTNATSNOCTNATSNOC
HCAORBHCAORBHCAORB
07641086415864109641007415074101741527410374153741
4/3230.
9108.
336801416/018/2101/41
REKARREKARREKARREKARREKARREKARREKARREKARREKAR
PIKSKOOH
TNATSNOCTNATSNOCTNATSNOCTNATSNOC
HCAORBHCAORBHCAORB
087415774159741008410184103841058415584106841
1530.
7209.
414/66/018/21
REKARREKARREKARREKAR
TNATSNOCISOPHCAORBHCAORB
01941029410394153941
BAND SAW BLADES TRI-TEMP HARD EDGE, HARD BACK Tri-Temp blades are manufactured from high carbon alloy steel. Through a special heat treating process, a spring tempered hardness is given to the back of the blade. This quality allows the blade to be given more tension for added rigidity, resulting in straighter cuts and accuracy in contour cutting. Its greater tensile strength allows heavier feeds and provides longer blade life for production cutting. Tri-Temp is not recommended to be run at speeds over 4,000 feet per minute. For added versatility and performance, we recommend the original varied pitch Broach Tooth and Posi Tooth blades.
Available in coils and welded to length.
CARBON HARD EDGE, FLEX BACK A hard edge, flexible back blade for horizontal cut-off machines, and contour and straight cutting on vertical band saw machines. Its economical cost makes it a good choice for cutting “easy to machine” metals, wood, plastics and other materials that do not require high production blades. Carbon is a light duty production blade that is well suited for machines with small wheel diameters.
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytSlioC'052.oN.dorP
61/3520.
8.406.
40141
REKARREKARREKAR
PIKSTNATSNOCTNATSNOC
215115151102511
4/1520.
4.606.
46601418142
REKARREKARREKARREKARREKARREKAR
YVAW
KOOHPIKSKOOH
TNATSNOCTNATSNOCTNATSNOCTNATSNOC
53511055115451155511565110751157511
8/3520.
5.906.
34460141
REKARREKARREKARREKARREKARREKAR
KOOHPIKSKOOHKOOH
TNATSNOCTNATSNOC
595110161150611516115261103611
2/1520.
7.2106.
3446601418142
REKARREKARREKARREKARREKARREKARREKARREKAR
YVAW
KOOHPIKSKOOHKOOH
TNATSNOCTNATSNOCTNATSNOCTNATSNOCTNATSNOC
086115961109611007115071101711027110371153711
8/5230.
6108.
401
REKARREKAR
KOOHTNATSNOC
0771158711
4/3230.
9108.
2346680141
REKARREKARREKARREKARREKARREKARREKARREKAR
KOOHKOOHKOOHKOOH
TNATSNOCTNATSNOCTNATSNOCTNATSNOC
5971100811018110281152811038115381155811
1530.
7209.
3601
REKARREKARREKAR
KOOHTNATSNOCTNATSNOC
588115981150911
4/1-1240.
4370.1 3 REKAR KOOH 72911
Available in coils and welded to length.
Diamond Saw Works, Inc. (800)828-1180
X-TRA DUTY .032™
HARD EDGE, FLEX BACK Heavy duty for wood, metal and the furniture industries. A hard edge, flexible back blade with extra thickness (.032) for extra rigidity, strength and blade life. Widely used by the woodworking industries, especially furniture manufacturers. Also used on aluminum, magnesium, brass, etc. X-tra Duty™ is manufactured with a Hook tooth design and is available in 1/4”, 3/8" and 1/2”. Not recommended for machines that take a 15’ band or less.
FRICTION BANDS
FOR FRICTION CUTTING ONLY A special silicon carbon steel with good abrasion resis-tance and fatigue life is used for the manufacture of fric-tion cutting blades. Friction cutting is accomplished by running the band saw blade at high speed (8,000-15,000 S.F.P.M.). The high frictional heat created allows the blade to burn or melt away the material and the saw teeth re-move the molten metal from the work piece. Very thin or odd-shaped metals may be successfully cut by friction sawing when conventional methods fail.
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'052.oN.dorP
4/1230.
4.608. 4 REKAR KOOH 00161
8/3230.
5.908.
2334
STEREKAR
STEREKAR
KOOHKOOHKOOHKOOH
80161011612116151161
2/1230.
7.2108.
234
STEREKARREKAR
KOOHKOOHKOOH
911610216152161
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'052.oN.dorP
2/1230.
7.2108.
0141
REKARREKAR
TNATSNOCTNATSNOC
0017130171
8/5530.
6109.
0141
REKARREKAR
TNATSNOCTNATSNOC
6017180171
4/3530.
9109. 41 REKAR TNATSNOC 81171
1530.
7209.
80141
REKARREKARREKAR
TNATSNOCTNATSNOCTNATSNOC
911711217142171
Available in coil lengths and welded to length. Available in coil lengths and welded to length.
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'052.oN.dorP
4/1520.
4.606. 4 STE KOOH 59181
8/3520.
5.906.
34
STESTE
KOOHKOOH
0028130281
2/1520.
7.2106. 4 STE KOOH 90281
4/3230.
9108. 2 STE KOOH 31281
EVERY TOOTH SET (ETS)
Available in coil lengths and welded to length.
BAND SAW BLADES
Highly recommended for straight and contour cutting of wood, flake board, plastic, nonferrous materials, etc. Absence of raker teeth gives a third more cutting edges for additional blade life and abrasion resistance.
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T elytS elytS kluB.oN.dorP
536.1050.
5.1472.1 1/7.1 PIHCELPIRT ISOP 331349
541.2260.
4506.1 1/7.1 PIHCELPIRT ISOP 271349
TIMBER MASTER TK COLLECTION
TIMBER MASTER TK CT Carbide Tipped
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
063.1240.
4301.1 1 REKAR KOOH 01452 01552
536.1050.
1472.1 1 REKAR KOOH 02452 A/N
541.2050.
4572.1 1 REKAR KOOH 92452 A/N
541.2360.
4506.1 1 REKAR KOOH 03452 A/N
TIMBER MASTER TK B M42 BI-METAL
ssenkcihTxhtdiW
sehcnI mm .I.P.T htooTgnicapS elytS lioC'051
.oN.dorPlioC'052.oN.dorP
080.1530.
7209.
3.12
"4/3"2/1
KOOHKOOH
7561106711
7591106911
080.1240
7270.1
2.13.1
"8/7"4/3
KOOHKOOH
8561116611
8591116911
063.1240.
4370.1
12.12.1**
3.1
"1"8/7"8/7"4/3
KOOHKOOHKOOHKOOH
66611466114606136611
66911469114416136911
536.1050.
1472.1
12.1
"1"8/7
KOOHKOOH
9661117611
9691117911
541.2050.
4572.1 1 "1 KOOH 67611 67911
ssenkcihTxhtdiW
sehcnI mm .I.P.T htooTgnicapS elytS lioC'051
.oN.dorPlioC'052.oN.dorP
080.1530.
7209.
3.12
"4/3"2/1
KOOHKOOH
7774108541
7794108941
080.1240
7270.1 3.1 "4/3 KOOH 28641 28941
063.1240.
4370.1
12.13.1
"1"8/7"4/3
KOOHKOOHKOOH
886417874158741
889417894158941
HARD EDGE, FLEX BACK HARD EDGE, HARD BACK
TIMBER MASTER TK C Carbon
This is the ultimate cutting tool for resawing hard and abrasive wood species. The precision ground cutting surfaces provide fast, smooth cuts. As in all mill type operations, for optimum life, care must be taken to be sure the wood is free from metal contaminants, such as nails, fence wire, bullets, etc.
This is an excellent heavy duty blade for production wood cutting. An Rc hardness of 67 on the tooth edge provides long blade life, especially for cutting abrasive, exotic wood species. As in all mill type operations, for optimum life, care must be taken to be sure the wood is free from metal con-taminants, such as nails, fence wire, bullets, etc.
The TIMBER MASTER TK™ band saw blade line covers a wide range of wood cutting applications. All blades are made of overwidth stock, which gives higher beam strength for fast, true cuts. All blades are factory set and delivered “ready-to-run” out of the box. Any TIMBER MASTER TK™ blade can be resharpened for extended life and optimal cost effectiveness.
A good general purpose blade intended for larger saws cut-ting more difficult wood species. The 45 Rc hardness of the backer provides a stiffer cutting tool, where true cutting is a key priority.
This is a good general-purpose blade for smaller saws and resaws. The 32 Rc hardness of the backer provides long fatigue life for multiple resharpenings and economical saw operations.
Available in coil lengths and welded to length.
Available in coil lengths and welded to length.
** Heavy Set
Available in coil lengths and welded to length.
Available in coil lengths and welded to length.
Diamond Saw Works, Inc. (800)828-1180
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
063.1240.
4370.1
5/86/01
YVAWYVAW
HCAORBHCAORB
8253213532
8283213832
Available in coil lengths and welded to length.
ssenkcihTxhtdiW
sehcnI mm .I.P.T teS elytS lioC'051.oN.dorP
lioC'052.oN.dorP
063.1240.
4370.1 5/8 YVAW HCAORB 34641 34941
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.TsehcnI mm
05-02964 530.x4/3x8 09.x02x002 81
PALLET RECLAIM B Bi-Metal
PALLET RECLAIM C Carbon
SAFETY TIP Bi-Metal Reciprocating Blade
PALLET RECLAIM COLLECTION The Sterling® Pallet Reclaim Collection includes saw blades designed for pallet dismantling saws. The collection includes bi- metal and carbon blades for band saws and specifically designed safety tip bi-metal blade for reciprocating saws. All blades in the collection feature a modified wave set pattern that reduces the amount of force necessary to cut through the pallet. Reduced force prolongs blade life, reduces operator fatigue leading to increased pallet processing productivity.
Available in coil lengths and welded to length.
Packaged 50 per box
OUR FACTORY SERVICE TEAM MAY BE CONTACTED FOR BLADE SELECTION ASSISTANCE AT:
Phone: 800-828-1180 Fax: 800-237-8853
Email: [email protected] or visit us on the WEB: www.diamondsaw.com
www.sterlingsawblades.com
Diamond Saw Works, Inc. (800)828-1180
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
0160401804
530.x"4/3x"6530.x"4/3x"8
09.x02x05109.x02x002
0101 .slatemsuorrefnondna,gnifoordnagnikcedlatemroF
046040480402104
530.x"4/3x"6530.x"4/3x"8530.x"4/3x"21
09.x02x05109.x02x00209.x02x003
01/4101/4101/41
.cte,doow,etinosam,snoitisopmoc,slatemeguagyvaeH
08004 050.x"4/3x"8 3.1x02x002 01/41 .latemeguagyvaehdnaepipliosgnittucroF
414044160441804
530.x"4/3x"4530.x"4/3x"6530.x"4/3x"8
09.x02x00109.x02x05109.x02x002
414141
oslA.cte,selgna,kcotsrab,”8/1nahtreivaehslatemroF.cte,ssalgrebif,etinosaM,rebbur
814048160481804
530.x"4/3x"4530.x"4/3x"6530.x"4/3x"8
09.x02x00109.x02x05109.x02x002
818181
niht,gnibut,epip,tiudnoc,latemteehseguagyvaehroF.cte,ssalgrebif
48693 530.x"4/3x"6 09.x02x051 41/81 ,”23/3nahtreivaehslatemnistuctsafrofhteetdetaudarG.”etisnarT“,rebif,ssalgrebifoslA.epip,selgna,kcotsrab
4240442604
530.x"4/3x"4530.x"4/3x"6
09.x02x00109.x02x051
4242
demrof,gnibutllawniht,eguag-81nahtrethgilslatemroF.cte,mirt,teehs
23404 530.x"4/3x"4 09.x02x001 23 .cte,mirt,gnibut,teehs,slatemeguagnihtyrevroF
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
41134 530.x"61/5x"8/5-3 09.x8x29 41 .etinosaM,ssalgrebif,latemeguagyvaehgnittucllorcsroF
81024 530.x"4/1x"3 09.x6x57 81 .eguag41nahtrethgilslatemgnittucllorcsroF
42024 530.x"4/1x"3 09.x6x57 42 .cte,slatemteehstsennihtehtgnittucllorcsroF
Packaged 5 per vinyl pouch or 50 per box
Packaged 5 per vinyl pouch or 50 per box
METAL CUTTING
METAL SCROLL CUTTING
BI-METAL RECIPROCATING SAW BLADES UNIVERSAL 1/2” SHANK
Tough, shatterproof bi-metal reciprocating blades fit all popular machines and out perform standard blades by a wide margin. The teeth retain their hardness and stay sharper longer. Breakage is eliminated because of its bi-metal construction. Select from over 40 different blades to match your cutting applications in wood, metal, fiberglass, nail-embedded wood, stainless and composition. For extra long life in stainless steel, fiberglass or other tough or abrasive applications, use SLIK-KOTE™ blades located on pg. 18.
Diamond Saw Works, Inc. (800)828-1180
oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
30154 050.xREPATx"21 3.1xREPATx003 3 .doownikrowni-gnihguor,gnittuctsetsaF
40054 050.xREPATx"6 3.1xREPATx051 4 ngisedekarevitisop,gnittuctsaF-™KRAHSREGIT.nignihguorrofgnicapstellugediwhtiw
60654 530.x"4/3x"6 3.1x02x051 6 lla,sdoowdeddebme-liandnadoowroF.slatemsuorrefnonoslA.lairetamnoitisopmoc
600546095460154
050.xREPATx"6050.xREPATx"9050.xREPATx"21
3.1xREPATx0513.1xREPATx5223.1xREPATx003
666
-liandnadoownikrowni-gnihguorlareneG.gnittuctsaF.sdoowdeddebme
01154 050.xREPATx"21 3.1xREPATx003 01 ”8/1slatem,scitsalp,doowfosnoitcesrennihtroF.deriuqersihtgneledalbartxeerehw,rednudna
65025 530.x"4/3x"5 09.x02x001 6ooT-V ht
nistuctsaf,htoomsroF-GNITTUCRETSALP.retsalphtallatemdnadraobretsalp,retsalp
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
586645896458164
260.x"1x"6260.x"1x"9260.x"1x"21
6.1x52x0516.1x52x5226.1x52x003
5/85/85/8
,draobllaw,doow,gniledomer,krownoitilomedroF.doowdeddebme-lian,retsalp,gnilenap
6076460964
260.x"1x"6260.x"1x"9
6.1x52x0516.1x52x522
8/218/21
niht,htallatem,doowdeddebmelianroftesyvaW.krownoitilomedlatemdnaetalpleets
Packaged 2 per vinyl pouch or 50 per box
.oN.dorPssenkcihTxhtdiWxhtgneL
I.P.T sesUdednemmoceRsehcnI mm
11904 050x"4/3x"8 3.1x02x002 01/41kroWeucseRdnaeriFroF
11964 260.x1x"9 6.1x52x522 8/21
Packaged 2 per vinyl pouch or 50 per box
Packaged 5 per vinyl pouch or 50 per box
FIRE & RESCUE
WOOD & PLASTER CUTTING
UNIVERSAL 1/2” SHANK BI-METAL RECIPROCATING SAW BLADES
RUFF-NECK - DEMOLITION BLADES
.oN.dorP TNEMTROSSAEDALBGNITACORPICER
00005hcae1.hcuopyalpsidenonisedalbgnittuclatemdnadoowralupop5fonoitcelesgniwollofehtsniatnoCx"6(41604,)T41530.x4/3x"4(41404:GNITTUCLATEM;)T6050.repat"6(60054:GNITTUCDOOW
.)T81x4/3x"6(81604,)T81530.x4/3x"4(81404,)T41530.x"4/3
Diamond Saw Works, Inc. (800)828-1180
SLIK-KOTE RECIP ASSORTMENT #57570
70 PCS #41666 6” TAPER .050 6 TPI 100 PCS #41668 6” X 3/4 X .035 10 TPI 100 PCS #41670 6” X 3/4 X .035 14 TPI 70 PCS #41679 9” TAPER .050 6 TPI
POINT OF PURCHASE BOX DISPLAYS FOR BI-METAL RECIPROCATING SAW BLADES
6” METAL RECIP ASSORTMENT #57572
100 PCS #40614 6” X 3/4 X .035 14 TPI 100 PCS #40618 6” X 3/4 X .035 18 TPI 100 PCS #40624 6” X 3/4 X .035 24 TPI 100 PCS #39684 6” X 3/4 X 035 18/14 TPI
8” METAL RECIP ASSORTMENT #57573
100 PCS #40810 8” X 3/4 X .035 10 TPI 100 PCS #40814 8” X 3/4 X .035 14 TPI 100 PCS #40818 8” X 3/4 X .035 18 TPI 100 PCS #40840 8” X 3/4 X .035 14/10 TPI
VARIED PITCH RECIP ASSORTMENT #57574
100 PCS #39684 6” X 3/4 X .035 18/14 TPI 50 PCS #46685 6” X 1 X .062 8/5 TPI 50 PCS #46706 6” X 1 X .035 12/8 TPI 100 PCS #40840 8” X 3/4 X .035 14/10 TPI
RUFF-NECK RECIP ASSORTMENT #57575
50 PCS #46685 6” X 1 X .062 8/5 TPI 50 PCS #46706 6” X 1 X .062 12/8 TPI 50 PCS #46985 9” X 1 X .062 8/5 TPI 50 PCS #46906 9” X 1 X .062 12/8 TPI
WOOD & METAL RECIP ASSORTMENT
#57576 100 PCS #40614 6” X 3/4 X .035 14 TPI 100 PCS #40618 6” X 3/4 X .035 18 TPI 100 PCS #40840 8” X 3/4 X .035 14/10 TPI 70 PCS #45006 6” TAPER .050 6 TPI 70 PCS #45906 9” TAPER .050 6 TPI 70 PCS #45106 12” TAPER .050 6 TPI
WOOD RECIP ASSORTMENT #57577
70 PCS #45103 12” TAPER .050 3 TPI 70 PCS #45006 6” TAPER .050 6 TPI 50 PCS #46685 6” X 1 X .062 8/5 TPI 50 PCS #46185 12” X 1 X .062 8/5 TPI 70 PCS #45004 6” TAPER .050 4 TPI 50 PCS #46985 9” X 1 X .062 8/5 TPI
METAL RECIP ASSORTMENT #57578
100 PCS #40120 12” X 3/4 X .035 14/10 TPI 50 PCS #46906 9” X 1 X .062 12/8 TPI 70 PCS #40080 8” X 3/4 X .050 14/10 TPI 100 PCS #40610 6” X 3/4 X .035 10 TPI 100 PCS #40614 6” X 3/4 X .035 14 TPI 100 PCS #40618 6” X 3/4 X .035 18 TPI 100 PCS #40818 8” X 3/4 X .035 18 TPI
Diamond Saw Works, Inc. (800)828-1180
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
01521 520.x"2/1x"8/5-3 46.x7.21x29 01 ,setisopmoc,latemyvaehnistucllorcsroFscitsalp,ssalgrebif
4152141621
520.x"2/1x"8/5-3520.x"2/1x"5
46.x7.21x2946.x7.21x721 41 ssalgrebif,latemeguagyvaehgnittucllorcsroF
8152181621
520.x"2/1x"8/5-3520.x"2/1x"5
46.x7.21x2946.x7.21x721 81 eguag41nahtrethgilslatemgnittucllorcsroF
42521 520.x"2/1x"8/5-3520.x"2/1x"5
46.x7.21x2946.x7.21x721 42 niht,eguag81nahtrethgilslatemgnittucllorcsroF
.cte,mirt,teehsdemrof,gnibut
23521 520.x"2/1x"8/5-3 46.x7.21x29 23 ,teehs,slatemeguagnihtyrevgnittucllorcsroF.cte,mirt,gnibut
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
41031 530.REPAT"4 530.REPAT001 41 .cte,selgna,kcotsrab,”8/1nahtreivaehlatemroF.cte,ssalgrebif,etinosam,rebburoslA
81031 530.REPAT"4 530.REPAT001 81 ,gnibut,epiptiudnoc,latemteehseguagyvaehroFssalgrebifniht
42031 530.REPAT"4 530.REPAT001 42 ,gnibutllawniht,eguag81nahtrethgilslatemroF.cte,mirt,teehsdemrof
23031 530.REPAT"4 530.REPAT001 23 .cte,mirt,gnibut,teehs,slatemeguagnihtyrevroF
Packaged 5 per vinyl pouch or 100 per box
PNEU-SAW BLADES*
PNEU-SAW BLADES - SCROLL CUTTING
*Fits Nitto Kohki and other air saws Packaged 5 per vinyl pouch or 100 per box
Bi-metal blades to fit popular pneumatic saw machines. High-speed cutting edge welded to a tough, shatter resistant back makes this the ideal blade for air saw applications. The bi-metal construction obsoletes solid high-speed steel blades previously available. Available in 10, 14, 18, 24 and 32 tooth for all cutting jobs.
BI-METAL AIR SAW BLADES
VISIT US ON THE WEB AT: www.diamondsaw.com
www.sterlingsawblades.com
Diamond Saw Works, Inc. (800)828-1180
.oN.dorP knahSelytS
ssenkcihTxhtdiWxhtgneLtirG sesUdednemmoceR
sehcnI mm
04003 "4/1.VINU 230.x"61/5x"8/5-3 08.x8x29 ESRAOCedalbdesaercnidnaytilibapacgnittucdecnahnE
cimarecsahcusslairetamevisarbadrahniefilehtfohtdiwworranehT.etalsdnassalgrebif,elit
ruotnocdnathgiartshtobrofwollasedalbwasgij.gnittuc
10853 TENOYAB 230.x"8/3x"3 08.x01x57 MUIDEM
1026320463
ELYTS"T"ELYTS"T"
230.x"61/5x"3230.x"61/5x"4
08.x8x5708.x8x001
MUIDEMESRAOC
0041500815 piceR 040.x"4/3x"4
040.x"4/3x"80.1x02x0010.1x02x002 ESRAOC
CARBIDE GRIT HACKSAW & RODSAW Tungsten Carbide grit blades provide enhanced cutting capabilities in hard or abrasive materials such as hardened steel, hydraulic hose, ceramic tile and cable.
WASKCAHTIRG
ssenkcihTxhtdiWxhtgneL
.oN.dorP sehcnI mm tirG
62001 030.x4/3x21 7.x91x003 muideM
WASDORTIRG
25001 21 003 muideM
Packaged 5 per vinyl pouch or 100 per box.
Packaged 1 per vinyl pouch.
CARBIDE GRIT COLLECTION
GLAS-FAB™ COLLECTION
ALL JIG SAW SHANK STYLES
.oN.dorP knahSelytS
ssenkcihTxhtdiWxhtgneL.I.P.T sesUdednemmoceR
sehcnI mm
23028 "4/1.VINU 050.x"61/5x"2/1-3 3.1x8x98 YAW-2,ssalgrebifnistuceerfretnilpshtoomsroF
gnitaocecafrusdraH.ssalgixelp,doow.slairetamevisarbaniefiledalbsdda
33008 TENOYAB 050.x"8/3x"3 09.x01x57 YAW-2
27078 ELYTS"T" 050.x"61/5x"4 3.1x8x001 YAW-2
ALL JIG SAW AND RECIPROCATING SHANK STYLES
Universal, Bayonet and “T” Style blades are packaged 5 per vinyl pouch or 50 per box. Reciprocating blades are packaged 1 per vinyl pouch or 50 per box.
Diamond Saw Works, Inc. (800)828-1180
.oN.dorP knahSelytS
ssenkcihTxhtdiWxhtgneL.I.P.T sesUdednemmoceR
sehcnI mm
0402814028 "4/1.VINU 240.x"61/5x"2/1-3 1.1x8x98 01
41
rehtodnassalgrebifrofdednemmoceRnoevitceffeoslA.snoitacilppaevisarba
.leetssselniatsgnidulcnislatem
84108 TENOYAB 530.x"8/3x"3 09.x01x57 41
6628896288 ELYTS"T" 240.x61/5x"4
240.x61/5x"31.1x8x001
1.1x8x57821
66614976148661407614
.PICER
050.xREPAT"6050.xREPAT"9
530.x"4/3x"6530.x"4/3x"6
3.1x02x0513.1x02x52209.x02x05109.x02x051
660141
A special treatment and coating results in a hard, abrasion resistant surface that increases the cutting life of the blade.
Reciprocating blades are packaged 5 per vinyl pouch or 50 per box. Universal, Bayonet and “T” Style blades are packaged 5 per vinyl pouch or 100 per box.
Packaged 5 per vinyl pouch or 100 per box.
BI-METAL JIG SAW BLADES UNIVERSAL “T” STYLE Durable, high performance bi-metal jig/sabre saw blades outlast all other types of carbon and high speed steel blades. These shatterproof wood and metal cutting blades are available in three common shank designs. T-Style, ¼” Universal and Bayonet types. For extra long life in stainless steel, fiberglass or other tough or abrasive applications, our Slik-Kote™ treated blades are recommended. (See above)
METAL CUTTING
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
06268 240.x"61/5x"4 1.1x8x001 8 dnasetanimal,”8/5-”4/1suorrefnoN.”8/3-”4/1leetsdliM.cte,doow,latemnisruotnocthgitrofhtdiw”61/5.scitsalp
36268 240.x"61/5x"3 1.1x8x57 21 dnasetanimal,”8/5-”8/1suorrefnoN.”4/1-”8/1leetsdliM.cte,doow,latemnisruotnocrethgitrofhtdiw”61/5.scitsalp
46268 240.x"61/5x"3 1.1x8x57 81 .setanimaldna"4/1otpusuorrefnoN."61/3otpuleetsdliM.cte,doow,latemnisruotnocrethgitrofhtdiw61/5
76268 240.x"61/5x"3 1.1x8x57 42 ."8/1rednulatemdnagnibutllawnihT
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
67078 240.x"61/5x"4 1.1x8x001 6 rofhtdiw”61/5.”8/32otpusdoowtfosdnadrahnistuctsaF.cte,latem,doownisruotnocrethgit
47078 050.x"61/5x"4 3.1x8x001 6,”2/1-2otpudoowylp,doowtfosdnadrahnistuchtoomsroF
latem,doownisruotnocrethgitrofhtdiw”61/5.scitsalposla.dnuorGwolloH.cte
37078 050.x"61/5x"4 3.1x8x001 01,”4/1-3otpudoowylp,doowtfosdnadrahnistuchtoomsroF
latem,doownisruotnocrethgitrofhtdiw”61/5.scitsalposla.dnuorGwolloH.cte
77078 050.x"61/5x"4 3.1x8x001 01tuCnwoD
potsecudeR.gnittucnwodrofnoitceridhtootdesreveR.dnuorGwolloH.gnippihcdnagniretnilps
WOOD CUTTING
SLIK-KOTE BI-METAL COLLECTION
ALL JIG SAW AND RECIPROCATING SHANK STYLES
Packaged 5 per vinyl pouch or 100 per box.
Diamond Saw Works, Inc. (800)828-1180
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
21108 530.x"8/3x"3 09.x01x57 41 setanimaldnasuorrefnon”4/1-”8/1;leetS”4/1-”8/1
11108 530.x"8/3x"3 09.x01x57 81 .cte,gnibut,scitsalp,tiudnoc,leets”8/1-”61/1
31108 530.x"8/3x"3 09.x01x57 42 .suorrefnonnihtdnagnibutllawniht,leetsteehsnihT
41108 530.x"4/1x"4/3-1 09.x6x54 41 rofelbatius,suorrefnon"8/3-”8/1,leets”4/1-”8/1.krowllorcs
51108 530.x"4/1x"4/3-1 09.x6x54 42 llorcsrofelbatius,gnibutllawniht,leetsteehsnihT.krow
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
19008 050.x"8/3x"3 3.1x01x57 6 ,doownignihguorrof,htoottes,gnittucretsaF.snoitisopmoc,scitsalp
29008 050.x"8/3x"3 3.1x01x57 01 ,snoitisopmoc,doowrofhtoottes,gnittuctsaF.hsinifhtoomsmuidem-slatemsuorrefnon
.oN.dorPssenkcihTxhtdiWxhtgneL
.I.P.T sesUdednemmoceRsehcnI mm
05028 240.x"61/5x"2/1-3 1.1x8x98 01 .cte,citsalp,suorrefnon”4/3-”4/1,leets”2/1-”4/1
15028 240.x"61/5x"2/1-3 1.1x8x97 41 ,munimula,suorrefnon"2/1-"8/1,leets"4/1-"8/1.cte,scitsalp,ssalgrebif
25028 240.x"61/5x"2/1-3 1.1x8x97 81 .cte,gnibut,scitsalp,tiudnoc,leets”8/1-”61/1
35028 240.x"61/5x"2/1-3 1.1x8x97 42 .cte,acimrof,gnibutllawniht,rednudnaleets”61/1
.oN.dorPssenkcihTxhtdiWxhtgneL
I.P.T sesUdednemmoceRsehcnI mm
12028 530.x"4/1x"2/1-3 09.x6x98 6 otpustucllorcsdnanignihguorrofekarevitisoP.cte,scitsalp,draobdrah,doowylp,sdoowni”2/1
22028 530.x"4/1x"2/1-3 09.x6x98 01 ,doowylp,doownistucllorcsdnahsinifrehtoomS.”2/1otpusetanimal,scitsalp,doowdrah
80028 530.x"8/3x"4 09.x01x001 6 .setisopmoc,setanimal,gnittucdoowniefilgnoL
11028 530.x"8/3x"4 09.x01x001 01 ,doowylp,doownistuchsinifrofhteetteseniF.munimula,ssarb,etinosam,scitsalp
METAL CUTTING
METAL CUTTING
WOOD CUTTING Packaged 5 per vinyl pouch or 100 per box
Packaged 5 per vinyl pouch or 100 per box
Packaged 5 per vinyl pouch or 100 per box
Packaged 5 per vinyl pouch or 100 per box
BI-METAL JIG SAW BLADES BAYONET STYLE
WOOD CUTTING
BI-METAL JIG SAW BLADES UNIVERSAL 1/4” STYLE
Diamond Saw Works, Inc. (800)828-1180
HTOOTDRADNATS
.oNtcudorPssenkcihTxhtdiWxhtgneL sesUdednemmoceR
sehcnI mm .I.P.T
77001 520.x2/1x21 06.x7.21x003 41 .ssalgrebif,latemegaugyvaehgnittucroF
97001 520.x2/1x21 06.x7.21x003 81 .egaug41nahtrethgilslatemgnittucroF
18001 520.x2/1x21 06.x7.21x003 42 demrof,gnibutniht,egaug81nahtrethgilslatemgnittucroF.cte,mirt,teehs
38001 520.x2/1x21 06.x7.21x003 23 .cte,mirt,gnibut,teehs,slatemegaugnihtyrevgnittucroF
HCTIPDEIRAV
37001 520.x2/1x21 06.x7.21x003 41/81 swolladnasmelborpegappirtshtootsetagitimhctipdeiraV.snoitacilppafoyteiravrediwanistucretsafrof57001 520.x2/1x21 06.x7.21x003 02/42
STANDARD TOOTH Shatter resistent bi-metal construction allows blades to bend and flex. The high hardness tool steel cutting edge provides extended tool life compared to other hacksaw blades.
VARIED PITCH The original varied pitch tooth design was patented and introduced by Diamond Saw in 1937, on hand hacksaw blades. Over the years, improvements and variations have kept this blade on top in cutting ease and efficiency.
Mini-Hacks are packaged 1 per pouch. High Tension frames are packaged 5 per box.
Packaged 5 per vinyl pouch or 100 per box
HAND HACKSAW FRAMES #10022 High Tension hacksaw frame for 12" bi-metal hacksaw blades allows tensioning of bi-metal hacksaw blades up to 28000 PSI by turning tension knob four complete turns. Blades can be mounted straight or at a 45° angle for flush cutting. Extra blade storage inside hollow tube. Will accommodate hacksaw or recip. blades to use as a jab saw.
The Sterling Mini-Hack handle will accommodate wood or metal cutting ½” shank reciprocating blades as well as hand hacksaw blades.
EDP #10022 High Tension (Pictured)
EDP #10001 (Mini-Hack)
HAND HACKSAW BLADES BI-METAL SHATTERPROOF
Diamond Saw Works, Inc. (800)828-1180
.oNtcudorPssenkcihTxhtdiWxhtgneL
.I.P.TsehcnI mm
0030140301
050.x1x21050.x1x21
3.1x4.52x0033.1x4.52x003
0141
2130161301
050.x1x41050.x1x41
3.1x4.52x0533.1x4.52x053
0141
0230142301
260.x4/1-1x41260.x4/1-1x41
6.1x23x0536.1x23x053
601
04301 570.x2/1-1x41 9.1x83x053 6
6730108301
260.x4/1-1x81260.x4/1-1x81
6.1x23x0546.1x23x054
601
.oNtcudorPssenkcihTxhtdiWxhtgneL
.I.P.TsehcnI mm
2930169301
570.x2/1-1x81570.x2/1-1x81
9.1x83x0549.1x83x054
46
8040121401
880.x4/3-1x81880.x4/3-1x81
2.2x54x0542.2x54x054
46
4240163401
880.x4/3-1x12880.x4/3-1x12
2.2x54x5252.2x54x525
44/6
6540126401
001.x2x42001.x2x42
5.2x05x0065.2x05x006
43/4
.oNtcudorPhtdiWxhtgneL
sesudednemmoceRsehcnI mm .I.P.T
60901 4/1-1x21 23x003 41 .cte,ssalgrebif,eznorb,ssarb,leetsfosnoitcesrennihT
70901 4/1-1x61 23x604 41 .cte,ssalgrebif,eznorb,ssarb,leetsfosnoitcesrennihT
92901 4/1-1x61 23x604 8 .cte,ssalgrebif,eznorb,ssarb,leetsfosnoitcesreivaehroF
03901 4/1-1x12 23x525 41 .cte,ssalgrebif,eznorb,ssarb,leetsfosnoitcesrennihT
37901 4/1-1x42 23x006 41 .cte,ssalgrebif,eznorb,ssarb,leetsfosnoitcesrennihT
57901 4/1-1x03 23x567 41 .cte,ssalgrebif,eznorb,ssarb,leetsfosnoitcesrennihT
.oN.tcudorPssenkcihTxhtdiWxhtgneL
.I.P.TsehcnI mm
eldnaHhtiwedalB
1310718107
2181
003054
0101
sedalBtnemecalpeR
0310708107
530.x2/1-2x21530.x2/1-2x81
09.x46x00309.x46x054
0101
Packaged 10 per box.
Packaged 10 per box.
Packaged 5 per box.
PORTABLE HACKSAW BLADES
POWER HACKSAW BLADES SHATTERPROOF BI-METAL Sterling® power hacksaw blades have an M-3 high speed steel cutting edge welded to a tough alloy steel back. The bi-metal construction results in a strong, shatter-resistant blade for high productivity and safety in the toughest cutting applications. The extra width of this blade gives rigidity and durability, cut after cut.
PORTA-HACK BI-METAL PORTA-HACK™ blades are used by utility companies, petro chemical plants and large contractors for job-site cutting of pipe, structurals and other materials.
PVC/ABS PLASTIC PIPE SAW BLADES SPRING TEMPERED BACK
Sterling® PVC/ABS Plastic Pipe Blades are of one-piece carbon construction. The cutting edge is hardened to 63-66 RC for good wear resistance. The spring tempered back resists flexing while cutting on both the push and pull strokes. Cuts plastic, wood, drywall, PVC and ABS pipe. The heavy duty aluminum handle is easy to assemble with a single screw blade attachment. Available with or without handle.
Diamond Saw Works, Inc. (800)828-1180
lateM-iB.oN.dorP
edibraCdeppiT
.oN.dorP
retemaiD
sehcnI mm
90055 90065 "61/9 41
01055 01065 "8/5 61
11055 11065 "61/11 71
21055 21065 "4/3 91
31055 31065 "61/31 12
41055 41065 "8/7 22
51055 51065 "61/51 42
61055 61065 "1 52
71055 71065 "61/1-1 72
81055 81065 "8/1-1 92
91055 91065 "61/3-1 03
02055 02065 "4/1-1 23
12055 12065 "61/5-1 33
22055 22065 "8/3-1 53
32055 32065 "61/7-1 73
42055 42065 "2/1-1 83
52055 52065 "61/9-1 04
62055 62065 "8/5-1 14
72055 72065 "61/11-1 34
82055 82065 "4/3-1 44
92055 92065 "61/31-1 64
03055 03065 "8/7-1 84
23055 23065 "2 15
33055 33065 "61/1-2 25
43055 43065 "8/1-2 45
63055 63065 "4/1-2 75
lateM-iB.oN.dorP
edibraCdeppiT
.oN.dorP
retemaiD
sehcnI mm
73055 73065 "61/5-2 95
83055 83065 "8/3-2 06
04055 04065 "2/1-2 46
14055 14065 "61/9-2 56
24055 24065 "8/5-2 76
44055 44065 "4/3-2 07
64055 64065 "8/7-2 37
84055 84065 "3 67
05055 05065 "8/1-3 97
25055 25065 "4/1-3 38
45055 45065 "8/3-3 68
65055 65065 "2/1-3 98
85055 85065 "8/5-3 29
06055 06065 "4/3-3 59
26055 26065 "8/7-3 89
46055 46065 "4 201
66055 66065 "8/1-4 501
86055 86065 "4/1-4 801
07055 07065 "8/3-4 111
27055 27065 "2/1-4 411
67055 67065 "4/3-4 121
08055 08065 "5 721
88055 88065 "2/1-5 041
29055 29065 "4/3-5 641
69055 69065 "6 251
HOLE SAWS CARBIDE TIPPED
Sterling® carbide tipped hole saws are especially suited for cutting holes in cut fiberglass, transite, flake board and cast iron when standard high speed hole saws will not do the job.
BI-METAL – VARIED PITCH
Sterling® hole saws are available in bi-metal construction known for its endurance and shatterproof qualities. High hardness teeth welded to a tough backer material, coupled with varied pitch, positive rake teeth makes Sterling® hole saws the first choice.
Diamond Saw Works, Inc. (800)828-1180
BI-METAL PRO PACK HOLE SAW KIT(#57515) Includes: 1 - 3/4” hole saw 1 - 7/8” hole saw 1 - 1-1/8” hole saw 1 - 1-3/8” hole saw 1 - 1-1/2” hole saw 1 - 1-3/4” hole saw 1 - 2” hole saw BI-METAL PLUMBER’S HOLE SAW KIT(#57528) Includes: 1 - 3/4” hole saw 1 - 7/8” hole saw 1 - 1-1/8” hole saw 1 - 1-1/2” hole saw 1 - 1-3/4” hole saw BI-METAL ELECTRICIAN’S HOLE SAW KIT(#57527) Includes: 1 - 7/8” hole saw 1 - 1-1/8” hole saw 1 - 1-3/8” hole saw 1 - 1-1/2” hole saw 1 - 1-3/4” hole saw 1 - 2” hole saw CARBIDE TIPPED HOLE SAW KIT(#57507) Includes: 1 - 3/4” hole saw 1 - 7/8” hole saw 1 - 1-1/8” hole saw 1 - 1-3/8” hole saw 1 - 1-1/2” hole saw 1 - 1-3/4” hole saw 1 - 2” hole saw *Quick change design, with knurled collar
HOLE SAW KITS A selection of four different hole saw kits which include Bi-Metal Pro Pack, Bi-Metal Plumber’s, Bi- Metal Electrician’s and Carbide Tipped kits. The contents of each kit include the most commonly used hole saws, arbors and accessories used for that particular trade task. All hole saws are packed in a sturdy plastic case.
ARBORS A selection of five different arbors, each supplied with a ¼” pilot drill, will accommodate all universal types of hole saws. Order arbors by product number to fit whatever hole saw is being used. Quick change arbors (57045 & 57072) permit change of hole saw without removal of arbor from chuck.
¼” PILOT DRILLS A pilot drill is included with each arbor or is available separately.
ARBOR ADAPTOR This arbor adaptor converts ½” -20 threaded arbors (57014, 57015, 57016, 57018) to 5/8"-18 thread size to accommodate larger diameter saws. Not recommended for use with saws over 1-1/2" diameter.
ARBOR ADAPTOR 00075 ot)81075,61075,51075,41075(srobradedaerht02-"2/1strevnoC
.swasretemaidregraletadomoccaotezisdaerht81-"8/5
1 - 2-1/4” hole saw 1 - (57014) 1/4” round arbor 1 - (57045*) 7/16 hex arbor 1 - (57035) extra 1/4” pilot drill
1 - 2-1/4” hole saw 1 - 2-1/2” hole saw 1 - (57018) 7/16” hex arbor 1 - (57045*) 7/16 hex arbor 1 - (57035) extra 1/4” pilot drill
1 - 2-1/4” hole saw 1 - 2-1/2” hole saw 1 - (57014) 1/4” round arbor 1 - (57045*) 7/16 hex arbor 1 - (57035) extra 1/4” pilot drill 1 - (57000) arbor adaptor
HOLE SAW KITS & ACCESSORIES
ARBORS (with high speed 1/4” pilot drills) .dorPrebmuN
swaSeloHstiF).aiD(
hguorhTswolloF knahS daerhTeziS
kcuhCeziS
41075 "61/3-1-"61/9 "61/3-1-"1 dnuor"4/1 02-2/1 "4/1
51075 "61/3-1-"61/9 "61/3-1-"1 xeh"4/1 02-2/1 "4/1
61075 "61/3-1-"61/9 "61/3-1-"1 xeh"8/3 02-2/1 "8/3
81075 "61/3-1-"61/9 "2/1-1-"8/7 xeh"61/7 02-2/1 "2/1
02075 "8/3-2-"4/1-1 "8/3-2-"4/1-1 xeh"61/7 81-8/5 "2/1
*54075 "6-"4/1-1 "6-"61/7-1 xeh"61/7 81-8/5 "2/1
*27075 "6-"4/1-1 "6-"61/7-1 xeh"8/5 81-8/5 "4/3
53075 GNOL"4)xeh"8/5&xeh"61/7,.DR"4/1ROF(LLIRDTOLIP"4/1ARTXE
63075 GNOL"3)xeh"8/3&xeh"4/1ROF(LLIRDTOLIP"4/1ARTXE
00175 knahsxeh"61/7ROFNOISNETXE"21
1 - 2-1/4” hole saw 1 - 2-1/2” hole saw 1 - (57014) 1/4” round arbor 1 - (57045*) 7/16 hex arbor 3 - (57035) extra 1/4” pilot drill Arbor adaptor included
*Quick change design, with knurled collar BI-METAL PRO PACK HOLE SAW KIT #57515
For the location of your nearest authorized Sterling® dealer, call us at: 800-828-1180
DIAMOND SAW WORKS, INC. 12290 OLEAN ROAD
CHAFFEE, NEW YORK U.S.A. 14030-9768 PHONE: 800-828-1180
FAX: 800-237-8853 EMAIL: [email protected]
WEB: www.sterlingsawblades.com or
www.diamondsaw.com