Stepgages for accuracy control of Coordinate Measuring Machines

• Stepgages

• Accessories

• Evaluation Software

• Training

Product range

• Available in following length:300, 500, 700, 1060, 1100 and1540mm.

• Other length on demand

• Ceramic gauge cylinders Ø8.5x20mm• Step distance of the cylinders 40mm• Profile 55x55mm•Temperature scale at the stepgage• Marked with Bessel rest points• Galvanized surfaces• Aluminium transport box• Option: Calibration with certificate

Practice

All Coordinate Measuring Machines should have a permanent control ofits accuracy. For this you can use a stepgage for a very fast measurement.

All stepgages more then 300 mm length are fixable on a universal fixture. This fixture you can rotate andalso swivel for justify different positions.

For the 300mm stepgage there is a special stand with severalpostpositions.

Characteristics

Stepgages for accuracy control of Coordinate Measuring Machines

Accessories for stepgage

• Stand for SG 300mm (several postpositions)

• Fixture for SG 500 - 1100mm(Rotate- Swivel)

• Fixture for SG 1100 - 1540mm(Rotate- Swivel)

• Fixed postpositions (horizontal-vertical)35° | 0° | 90°

• Direct installation on CMM table- central bore

• In aluminium box

• Standpipes and adapters can be orderedseperately

Stepgages for accuracy control of Coordinate Measuring Machines

ITI-Check is independent of yourCMM-Type

For every saved .txt file you canprogramm a special adapter to readin the values

For Zeiss Calypso user we can delivera PCM program to measure thestepgage

Independent of CMM-Type

With the universal evaluationsoftware ITI-Check you can have a complete acceptance record of yourCMM

We support 1D- and 3D-measurements. With the standardISO10360 you also measure a sphere with 25 points

The evaluation mode can bechoosed by ISO10360 orVDI/VDE2617

Evaluation Software ITI-Check

Training

For an effective usage of theevaluation software we offer a training lesson for 1day

Stepgages for accuracy control of Coordinate Measuring Machines

DKD - Calibration

We offer a DKD-Calibration for thestepgage.

Ther are two different calibrationscalled: Niveau1 and Niveau2

Niveau 1 :U=0.1µm+0.5x10-6xL (L=Length SG)

Niveau 2 :U=0.2µm+0.5x10-6xL (L=Length SG)

Specifications

Measuring range(total length) in mm

Standard length:• 300 (320)• 500 (520)• 700 (720)• 1060 (1080)• 1100 (1120)• 1540 (1560)

Other length on demand

Stepgages for accuracy control of Coordinate Measuring Machines

Programing - Adaption of accuracy - Gear Measurement - Reverse Engineering - Freeform/Curve - Training

Value service

Visit us in Oberndorf

Industrie Team Service GmbHTeckstraße 13D-78727 Oberndorf am Neckar

Phone + 49 7423 / 8767-0Fax + 49 7423 / 2023Email info@its-team.deHomepage www.its-team.de

Industrie Team Service GmbH