- STEP 1 intuitives Cube - PASCAL'S method.pdf · the location in the space, of each piece of the...

1
"PASCAL'S" Method (Placement Arêtes Sommets Centres par Algorithmes Limités) it's a mix of Intuitive CFOP with phases of orientation type ZZ or Petrus but in much simpler STEP 1 : make 1 perfect cross + train and place 2 F2L STEP 2 : train and place the 3rd F2L by monitoring the orientation of the edges STEP 3 : train the 4th F2L while orienting the 2nd Cross Edges STEP 4 : place the 4th F2L while placing the Edges of the 2nd Cross STEP 5 : orient the Summits STEP 6 : END OF CUBE - STEP 1 intuitive - make 1 perfect cross + train and place 2 F2L (for the example, we realize the WHITE CROSS) but for motivated people … It is interesting to be able to make this cross of any color. it is not as simple as it seems! the location in the space, of each piece of the cube compared to the others, then becomes much more delicate in the rest of the resolution. this step is totally intuitive, no algorithm to learn by heart. Make the cross. to be fast, it is interesting to be able to realize this cross, on the lower side, or if not, on the left side of the cube. it requires to know, by heart, the normal position of the colors of the cube. because you must never reposition the cross during its construction, (That's a habit to take) in short, to make the perfect cross is simple, but it's a lot harder to do it optimized, that is to say quickly, in a few movements. ALWAYS less than 10 (usually 7) the first 2 F2L (First 2 Layers) This is to form a pair Ridge + Top that we then place correctly in the cube it is very intuitive and with a little habit it becomes VERY simple. below all possible cases. (formulas can not be learned, they must come naturally, it's easy!) - STEP 2 intuitive - train and place the 3rd F2L by monitoring the orientation of the edges It's about forming the F2L pair in a classic way and then placing it BUT it should be done as much as possible so that there is at least 1 YELLY ridge well oriented in U at the end of the operation (ideally 2 or better 3) there are 2 cases + symmetrical, elementary and intuitive following the orientation of YELLOW Ridge on the middle slice do : EVENT A : L'UL EVENT B : F'L'FL if no YELLOW ridge on the middle edge and none to 1 in front U do the event B (formulas can not be learned, they are elementary) - STEP 3 intuitive - train the 4th F2L while orienting the 2nd Cross Edges the goal is to arrive at 7 elementary and simple + symmetric EVENT IF STEP 2 IS PROPERLY IMPLEMENTED THE RARE CASE IS ALMOST IMPOSSIBLE (still easy, the formulas can not be learned) - STEP 4 intuitive - place the 4th F2L while placing the Edges of the 2nd Cross 4 main cases, elementary and simple + symmetrical the tracking is very easy! we search for the middle edge the one with the opposite color on the U side following the classic rule GREEN opposite BLUE | RED opposite ORANGE (Also, the formulas can not be learned, it's very simple!) The first and middle sides are finished! the resolution of the last F2L in little movement (from 6 to 17, in general 10) allowed also to have THE YELLOW CROSS ORIENTED AND PLACED NEXT 2 PRIVILEGED CASES - STEP 5 - orient the Summits the intuitive steps are over! But this is always simple because there are very few algorithms to learn. They are running with easy tracking 5 simple and fast cases sometimes there is no summits well oriented, then do 1 or 2 even if there are many others, but not shorter, it's important to use these algorithms, because they all preserve the placement of the edges concerns especially the case where no summit is well oriented from the start - ÉTAPE 6 - END OF CUBE 8 simple algorithms that correspond to 8 PLL of CFOP, the only ones to know if no summit is well placed = PLL E do 2 times the algorithm Aa or Ab CUBE IS RESOLVED ! with usual less than 20 seconds are attainable ! this method does not compete with the techniques that are CFOP Fridrich, Roux, ZZ, when they are mastered in their entirety. it remains nevertheless more effective than CFOP F2L + OLL 2step + PLL 1step AND ESPECIALLY it is much simpler than all that it is very intuitive in 3/4 of the resolution there are very few algorithms to know: only 13! they are all short and easy to execute the tracking is very simple and logical

Transcript of - STEP 1 intuitives Cube - PASCAL'S method.pdf · the location in the space, of each piece of the...

Page 1: - STEP 1 intuitives Cube - PASCAL'S method.pdf · the location in the space, of each piece of the cube compared to the others, then becomes much more delicate in the rest of the resolution.

"PASCAL'S" Method (Placement Arêtes Sommets Centres par Algorithmes Limités)

it's a mix of Intuitive CFOP

with phases of orientation type ZZ or Petrus but in much simpler

STEP 1 : make 1 perfect cross + train and place 2 F2L STEP 2 : train and place the 3rd F2L by monitoring the orientation of the edges

STEP 3 : train the 4th F2L while orienting the 2nd Cross Edges STEP 4 : place the 4th F2L while placing the Edges of the 2nd Cross

STEP 5 : orient the Summits STEP 6 : END OF CUBE

- STEP 1 intuitive - make 1 perfect cross + train and place 2 F2L

(for the example, we realize the WHITE CROSS) but for motivated people …

It is interesting to be able to make this cross of any color. it is not as simple as it seems!

the location in the space, of each piece of the cube compared to the others, then becomes much more delicate in the rest of the resolution.

this step is totally intuitive, no algorithm to learn by heart.

Make the cross. to be fast, it is interesting to be able to realize this cross, on the lower side, or if not, on the left side of the cube.

it requires to know, by heart, the normal position of the colors of the cube. because you must never reposition the cross during its construction,

(That's a habit to take) in short, to make the perfect cross is simple,

but it's a lot harder to do it optimized, that is to say quickly, in a few movements.

ALWAYS less than 10 (usually 7)

the first 2 F2L (First 2 Layers) This is to form a pair Ridge + Top

that we then place correctly in the cube it is very intuitive and with a little habit it becomes VERY simple.

below all possible cases.

(formulas can not be learned, they must come naturally, it's easy!)

- STEP 2 intuitive - train and place the 3rd F2L by monitoring the orientation of the edges

It's about forming the F2L pair in a classic way and then placing it BUT

it should be done as much as possible so that there is at least 1 YELLY ridge well oriented in U at the end of the operation

(ideally 2 or better 3) there are 2 cases + symmetrical, elementary and intuitive

following the orientation of YELLOW Ridge on the middle slice do :

EVENT A : L'UL EVENT B : F'L'FL

if no YELLOW ridge on the middle edge and none to 1 in front U do the event B

(formulas can not be learned, they are elementary)

- STEP 3 intuitive - train the 4th F2L while orienting the 2nd Cross Edges

the goal is to arrive at

7 elementary and simple + symmetric EVENT

IF STEP 2 IS PROPERLY IMPLEMENTED

THE RARE CASE IS ALMOST IMPOSSIBLE

(still easy, the formulas can not be learned)

- STEP 4 intuitive - place the 4th F2L while placing the Edges of the 2nd Cross

4 main cases, elementary and simple + symmetrical

the tracking is very easy!

we search for the middle edge

the one with the opposite color on the U side following the classic rule

GREEN opposite BLUE | RED opposite ORANGE

(Also, the formulas can not be learned, it's very simple!)

The first and middle sides are finished!

the resolution of the last F2L

in little movement

(from 6 to 17, in general 10)

allowed also to have

THE YELLOW CROSS ORIENTED AND PLACED

NEXT 2 PRIVILEGED CASES

- STEP 5 - orient the Summits

the intuitive steps are over! But this is always simple because there are very few algorithms to learn.

They are running with easy tracking

5 simple and fast cases

sometimes there is no summits well oriented, then do 1 or 2

even if there are many others, but not shorter, it's important to use these algorithms,

because they all preserve the placement of the edges concerns especially the case where no summit is well oriented from the start

- ÉTAPE 6 - END OF CUBE

8 simple algorithms that correspond to 8 PLL of CFOP, the only ones to know

if no summit is well placed = PLL E

do 2 times the algorithm Aa or Ab

CUBE IS RESOLVED !

with usual less than 20 seconds are attainable !

this method does not compete with the techniques that are

CFOP Fridrich, Roux, ZZ,

when they are mastered in their entirety.

it remains nevertheless more effective than

CFOP F2L + OLL 2step + PLL 1step

AND ESPECIALLY

it is much simpler than all that

it is very intuitive in 3/4 of the resolution

there are very few algorithms to know: only 13!

they are all short and easy to execute

the tracking is very simple and logical