Classic & Exotic Service, Inc.2032 Heide, Troy MI 48084 USAPhone: 1.248.269.9414E-mail: Parts@classicandexotic.comWWW: http://www.classicandexotic.com

SKU Product Name Price

Bearings, Bushings, Grommets, Fittings

CAD-0199 Cadillac Steering Tube BushingBrass steering tube bushing for use in Cadillac models 345 353A 370Aand 452A. Cadillac part number 257146, group 18.0328.

$ 10.50

COR-0001

Cord 810 812 Steering Column GrommetsNew molded rubber grommets for the steering column on Cord 810/812.Sold as a set of two - two required per car. Measure: 3 3/4 OD; 1 11/16 ID.

$ 33.00

COR-0031 Cord 810/812 Center Steering Link BearingCord 810 / 812 center steering link bearing. Material: Steel; OD: 1.530; ID:.500; Outer race length: 1.750; Inner race length: 1.998.

$ 309.00

HIS-0097

Hispano Suiza Steering Wheel Clamp BoltHispano Suiza J-12 steering wheel clamp bolt. Hispano Suiza part numberB556. Material: 4140, heat treat grade 8; Finish: Natural; Thread: M10 x1.5; Thread length: 19mm; OAL: 71mm; Head hex: 14mm; Head height:6.5mm; Length under head: 64mm.

$ 10.50

HIS-0104

Hispano Suiza Steering Gear Box Cover BoltHispano Suiza J-12 steering gear box cover bolt. Material: 4140, heat treatgrade 8; Finish: Natural; Thread: M6 x 1.0; Thread length: 9mm; Length:16mm; Hex: 9mm; Length under head: 12mm.

$ 4.75

HIS-0127

Hispano Suiza Steering Stabilizer Arm Mount ScrewHispano Suiza J-12 steering stabilizer arm mount screw. Material: 4140, heat treat grade 8; Finish: Natural; Thread: M7 x 1.0; Thread length:17mm; Length: 36mm; OD: 12mm; Length under head: 33mm.

$ 25.25

HIS-0128

Hispano Suiza Steering Stabilizer Rod PuckSteering stabilizer rod puck for Hispano Suiza J-12. Material: 4140, heattreated to maximum hardness; Length: 6.33mm; OD: 18.5mm; ID ofindent: 11mm.

$ 17.75

HIS-0159

Hispano Suiza Steering Dampener Ball StudCase hardened 8620 steel ball stud. For use on Hispano Suiza J-12steering dampener. Material: 8620, Max RC carburized to .030; Ball OD:.705; OAL: 1.681; Length under shoulder: .625; Shaft OD: .375; Flat DIA.:.475; Shoulder OD: .716.

$ 67.00

J-4460-39 Brass 5/8 Anti-Rattle BushingSlotted split brass anti-rattle bushing for 5/8 steering column control tube. Measures 1'' OAL.

$ 16.50

J-4460-41 Brass 1/2 Anti-Rattle BushingSlotted split brass anti-rattle bushing for 1/2 steering column control tube. Measures 3/4 OAL.

$ 10.50

J-4460-43 Brass 3/8 Anti-Rattle BushingSlotted split brass anti-rattle bushing for 3/8 steering column control tube. Measures 3/4 OAL.

$ 10.50

4/27/18. Prices subject to change. Page 1/6

SKU Product Name Price

J-4460-45 Brass 9/32 Anti-Rattle BushingSlotted split brass anti-rattle bushing for 9/32 steering column control tubes. Measures 13/16 OAL.

$ 10.50

LIN-0003

Lincoln V-12 Inner Pitman Shaft SealInner pitman shaft eccentric felt seal for use on 1930's Lincoln V-12 steeringgear boxes. Material: Felt; ID: 1 3/8; OD: 1 9/16; Thickness: 9/32; Wall:.9375.

$ 4.75

LIN-0016 1937-39 Lincoln K Steering Gear Box SealFelt steering gear box seal for use on 1937 - 1939 Lincoln Model K. OD:2.079; ID: 1.678; Thickness: .277.

$ 10.50

P-0198 1939-42 Packard Steering Bushing Domed WasherDomed washer for use in the center steering link on 1939 - 1942 Packard. OD: 1.561; ID: .813.

$ 20.75

P-0199 Packard Steering Bushing NutPackard steering bushing nut. Material: Steel; Finish: Natural; Thread:1/2-18; Hex: 1 1/8; Thickness: .510.

$ 15.50

RR-0075

Rolls Royce Phantom II Steering Column Control Lock WasherLock washer for steering column control tube. Used to lock control tube inplace at bottom end of steering box on Rolls Royce Phantom II. RollsRoyce part number F.71841. Material: Carbon steel; Finish: Manganesephosphate; ID: .815; OD: 1.00; Thickness: .057.

$ 17.00

RR-0076

Rolls Royce Phantom II Steering Column Lock RingLock ring for double thrust race nut. Used on Rolls Royce Phantom II uppersteering column to lock the thrust bearing nut. Rolls Royce part numberF.70473. Material: Carbon steel; Finish: Manganese phosphate; OD: 1.70; ID: 1.49; Thickness: .046; Width of tabs: .200.

$ 17.00

Drag Link, Steering Arm, Tie Rod

CAD-0174

1930-31 Cadillac Steering Gear Arm PivotSteering gear arm pivot for use on 1930 - 1931 Cadillac V-8 V-12 and V-16.Cadillac part number 1096635, group 18.1352. Material: 8620, carburized; Finish: Natural; Thread: 5/8-18; Thread length: .850; Ball DIA: 1.100; Length: 3.340; Cotter pin hole: .120.

$ 51.50

CAD-0174-D

1930-31 Cadillac Steering Arm Tie Rod Dust Cover SpringSteering arm tie rod ball stud dust cover spring for use on 1930 - 1931Cadillac V-8 V-12 and V-16. Cadillac group 1.0719, part number 891491''Spring dustcover''. For Series: 303 328 340 345 353 355ABC 370ABC 452ABC. Material: Steel wire; Finish: Natural; Wire: .100; Free length:.750; OD: 1.399.

$ 8.25

CAD-0174-E

1928-33 Cadillac & LaSalle Tie Rod Screw LockSteering arm tie rod screw lock for use on 1928 - 1933 Cadillac LaSalle. For use on the following Series: 340 345 353 355 ABC 370 ABC 452ABC. *For use before front axle unit 30-1647 on 345 C 355 C 370 C and50-31 on 452 C. Cadillac part number 873278, group 1.0708. Material:12L14; Finish: Natural; OAL: 2.850; Width: .630; Thickness: .048; HoleID: .400.

$ 6.25

CAD-0174-F

1928-33 Cadillac & LaSalle Tie Rod Cup PinSteering arm tie rod cup pin for use on 1928 - 1933 Cadillac and LaSalle.For use on the following Series: 303 314 328 340 341 345 BC 353 355BC 370 BC 452 BC. Cadillac part number 18898, group 1.0601. Material:Stainless steel; Finish: Natural; OD: 3/16; OAL: 3/8.

$ 1.25

Page 2/6 4/27/18. Prices subject to change.

SKU Product Name Price

CAD-0174-G

1928-33 Cadillac & LaSalle Tie Rod End PackingPacking for use between the cover and the; steering arm tie rod end on1928 - 1933 Cadillac LaSalle. For use on the following Series: 303 328 340 345 353 355 ABC 370 ABC. Cadillac part number 876848, group1.0725. Material: Leather; OD: 1.500; ID: .750; Thickness: .092.

$ 3.25

CAD-0174-H

1928-33 Cadillac & LaSalle Tie Rod End Grease PlugCork grease plug for steering arm tie rod ends on 1928 - 1933 Cadillac andLaSalle. For use on the following Series: 303 (after front axle unit 2-16608) 323 340 341 343 353 355 ABC 370 ABC 452 ABC. Cadillac partnumber 879921, group 1.0590. Material: Cork; OAL: 1.250; OD: 1.040; and.825; Trade size 11.

$ 1.75

DEL-0002 Delage D8 120 Drag Link SpringDrag link spring for use on Delage D8 120. Measures: .780 OAL; 3/4 OD;7/16 ID.

$ 11.00

DEL-0044

Delahaye 135 Tie Rod End CupHardened steel tie rod end cup for use on Delahaye 135's. Material: 4140, heat treat 35-40 RC; Finish: Natural; OD: .575; ID: .234; Height: .234; ODstep: .286; Height step: .109; Thickness: .025.

$ 6.25

HIS-0127

Hispano Suiza Steering Stabilizer Arm Mount ScrewHispano Suiza J-12 steering stabilizer arm mount screw. Material: 4140, heat treat grade 8; Finish: Natural; Thread: M7 x 1.0; Thread length:17mm; Length: 36mm; OD: 12mm; Length under head: 33mm.

$ 25.25

MISC-0222

1934 Packard Drag Link Formed Leather BootFormed leather boot for drag links. Fits 1934 Packard Super 8 (1103 1104 1105). We can produce custom formed boots to fit any application. Pleasecontact us for further information. Material: Leather; Finish: Natural; Length: 5.125; Unrolled width: 3.703; Bezel OD: 2.150; ID of hole: .593; Thickness: .082.

$ 46.50

P-0064

1935 Packard V-12 Drag Link BallHeat treated alloy steel drag link ball. Fits 1935 Packard V-12 and possiblyother models. Please see the additional pictures for a dimensional drawingof this item.

$ 128.75

P-0172

Packard Center Steering Arm Ball StudAlloy steel ball stud for the center steering arm of 1930's Packard. Ball hasbeen flame hardened to provide maximum wear resistance. Material: 4140steel, ball is heat treated to maximum RC; OAL: 2.424; Ball OD: 1.120; Shaft OD: .687; Flare OD: 1.125; Shaft length: .953.

$ 87.75

Lubrication Oil & Grease

MISC-0253

Mobilux EP 023 Lithium Grease32oz. Mobilux EP 023 lithium grease. Perfect for enclosed gears andbearings in vintage and classic vehicles. This is a non-channeling lubricantperfect for all manual steering boxes and suitable for some earlytransmissions. Exceptional resistance to leakage due to poor seals. MSDSavailable upon request.

$ 31.00

Steering Box

J-4460-14

Ross Steering Gear Housing Side Cover GasketRoss steering gear housing side cover gasket for use on early larger versionof the cover. For use on Ross 300 Series as used on Duesenberg and othermakes.

$ 14.50

J-4460-15

Ross Steering Gear Housing Adjusting Plug LockRoss steering gear housing adjusting plug lock. For use on Ross 300 Seriesas used on Duesenberg and other makes. Material: Carbon steel; Finish:Natural; ID: .325; Length: 1.125; Widest point: 1.002; Thickness: .118.

$ 31.00

4/27/18. Prices subject to change. Page 3/6

SKU Product Name Price

J-4460-24

Ross Steering Gear Cam Bearing Ball Race, LargeRoss steering gear cam bearing ball race. For use on Duesenberg andother prewar automobiles. Material: 52100 Steel, heat treat 62 RC; Finish:Natural; OD: 2.561; ID: 1.633 - 1.937; Thickness: .475; Outer chamfer:.125 x .45'; Inner radius: 9/32, .060.

$ 108.25

J-4460-36 Ross Steering Gear Lower Control WasherRoss steering gear lower control washer. For use on Duesenberg Model Jand others. Material: Neo cork; OD: 15/16; ID: 5/8; Thickness: 1/4.

$ 2.75

J-4460-61 Ross Steering Gear Trunnion Shaft Cork WasherRoss steering gear trunnion shaft cork washer. For use on DuesenbergModel J and others. Material: Cork; OD: 2.250; ID: 1.250; Thcikness: 5/16.

$ 5.75

J-4600-6

Ross Steering Box Cam Bearing Ball Race, SmallRoss steering box cam bearing ball race. This is the smaller sized race foruse on later boxes. Material: 52100 Steel; Finish: Natural; OD: 2.185; ID:1.460; Inner radius: 11/64 and .250; Thickness: .345.

$ 77.25

J-4600-18

Ross Steering Box Peg and RaceRoller bearing type peg race for Ross steering boxes as used byDuesenberg, Pierce Arrow, Reo, Franklin, Stutz and others. Made ofheat treated 52100 bearing steel. Same as Timkin part #00055 and#00053, part of Timkin bearing assembly #00055 90014.

$ 162.25

J-4600-20 Ross Steering Gear Roller Bearing Hex NutRoss steering gear roller bearing hex nut. Material: 4140 Steel, heat treatgrade 5; Finish: Natural; Thread: 1/2-20; Hex: 13/16; Thickness: .269.

$ 10.50

J-4600-21

Ross Steering Gear Roller Bearing Lock WasherLaser cut star shaped lock washer for use in Ross steering boxes. Material:Steel; Finish: Natural; Thickness: .045; ID: .500; OD; 1.234; ID flat: .290; Tab: .217 x .188.

$ 13.00

J-4600-22

Ross Steering Box Roller BearingRoller bearing for use in Ross steering boxes using our part numberJ-4600-18 peg and race. Timken part number 103. 26 required persteering box.

$ 3.75

J-4635 Ross Steering Gear Side Plate GasketPaper gasket for Ross steering boxes with roller bearing peg. For use withDuesenberg, Pierce Arrow, Reo, Franklin, Stutz and possibly others.

$ 12.50

J-4646

Ross Steering Trunnion Packing SupportTrunnion packing support. Used with Ross steering box to compress corktrunnion packing between box and frame. For use on Duesenberg, Franklin, Pierce Arrow, Stutz, Reo and others. Material: Cadmium platedsteel; ID: 1.250; OD: 2.250; Thickness: .062.

$ 8.75

MISC-0358

3/8-24 Hex Bolt3/8-24 Bolt used on the steering box of American Underslung automobiles.Duplicate of an original part from a 1910 Traveller. Material: Steel; Finish:Black Oxide; Thread: 3/8-24; Thread length: .700; OAL: 1.335; Hex: 9/16; Head height: .295; Length under head: .210; Hole: 1/8.

$ 10.50

MISC-0399 MISC-0400

Ross Steering Box ShimRoss steering box shim. Two thicknesses available: .008 and .005. Material:Steel shim stock; Hole DIA: .343.

$ 20.75

RR-0075

Rolls Royce Phantom II Steering Column Control Lock WasherLock washer for steering column control tube. Used to lock control tube inplace at bottom end of steering box on Rolls Royce Phantom II. RollsRoyce part number F.71841. Material: Carbon steel; Finish: Manganesephosphate; ID: .815; OD: 1.00; Thickness: .057.

$ 17.00

Page 4/6 4/27/18. Prices subject to change.

SKU Product Name Price

Steering Wheel Forms & Centers

BUG-0047

Bugatti Type 57 Steering Wheel ArmatureSteering wheel armature for Bugatti Type 57. This armature is laser cut toexacting specifications from an original wheel. Fully machined and ready tobe plated. Measures .125 thick with an OD of 17.375 inches.

$ 154.50

BUG-0048

Bugatti Type 49 Steering Wheel ArmatureSteering wheel armature for Bugatti Type 49. This armature is laser cut toexacting specifications from an original wheel. Fully machined and ready tobe plated. Measures .125 thick with an OD of 16 inches.

$ 154.50

MISC-0168

1930 - 1931 Bentley Steering Wheel ArmSteel replacement arm for Bentley steering wheels. Fits 1930-31 8 Litre may also fit earlier years and models. Two arms required per wheel. Limited inventory. Material: 1074 Annealed steel; Finish: Natural; Thickness: .082; Length: 15.860; Width at ends: .865; OD: 3.017; ID:1.750; Holes: .194.

$ 82.50

4/27/18. Prices subject to change. Page 5/6

Terms and Conditions

Delivery

Returns

We ship worldwide Monday through Friday. Our normal handling time is 24 hours or less - manyorders ship the same day they are placed. Some items may require an additional handling time -see individual product descriptions for information. Expedited domestic shipping is through UPS. For expedited UPS shipping, orders must be receivedby 1PM EST. Orders received after 1PM EST will ship the next business day. UPS business daysare Monday - Friday. Next Day Air orders placed on Friday will be delivered on Monday. In some instances, non-expedited domestic orders may be shipped by USPS Priority Mail at ourdiscretion. If your order must be shipped by UPS Ground, please note that when placing yourorder. International shipping is through USPS Express Mail or UPS Worldwide services. We do not ship by Fedex - that includes domestic and international orders. Shipping cost is determined by package weight and shipment destination. Shipping cost for yourorder can be viewed in your shopping cart by entering a shipment destination. Please note that our warehouse is closed to the public and we are unable to accommodate localpickups of orders.

Items must be returned in new unused condition within 14 days of receipt. Items returned after 14days of receipt are subject to a 15% restocking fee. No returns will be accepted after 90 days fromthe original purchase date. Original shipping charges are non-refundable. Refunds will be issuedupon receipt and inspection of the returned item and will be issued in the manner payment wasreceived. For returns made after 60 days, refunds will be issued by check only. Items which are cut to order and sold by the foot and items made to customer specified lengths orwidths are not returnable. When returning an item, please include a copy of your original invoice and send the item to: Classic & Exotic Service, Inc.Attn: Returns2032 Heide (USPS only)2000 Heide (UPS, FedEx only)Troy, MI 48084 USA All returns must be mailed - we cannot accommodate in-person returns.