Steel Weight Calculator
description
Transcript of Steel Weight Calculator
Calculation of Weight of Product RD Group TECHNICAL SERVICES DEPT.
Material:
Carbon &
ferritic
stainless
steels
density: 7800
Sheet / plate Thickness (mm)Width (mm) Length (m)
flat bar 1 kg:
Thickness (mm)Width (mm)
Coil kg/m:
Round Diameter (mm) Length (m)
bar / wire 1 kg:
A/F (mm) Length (m)
Square bar 1 kg:
A/F (mm) Length (m)
Hex bar 1 kg:
A/F (mm) Length (m)
Oct bar 1 kg:
Thickness (mm)Leg 1 (mm) Leg 2 (mm) Length (m)
Angle bar 1 kg:
OD (mm) ID (mm) Length (m)
Hollow bar 1 kg:
Round OD (mm) WT (mm) Length (m)
tube / pipe 1 kg:
Square / rect Side 1 (mm) Side 2 (mm) WT (mm) Length (m)
tube / pipe 50 50 5 6 kg: 42.12
Note: All results are approximate. Refer to second sheet for calculation fomulas.
www.rdsteelgroup.com/
Insert dimensions for the required product shape in orange boxes, then read off the weight in the red boxes at right. Note - Densities shown in green boxes are typical. Add specific density under "others" for different materials.
TECHNICAL SERVICES DEPT.
Austenitic
stainless
steels
Copper
alloys
(Note)
Aluminium
alloys
(Note)
Others
(Note)
7900 8470 2700 5000
42.66 45.74 14.58 27.00