Steel Chassis Tipper
Transcript of Steel Chassis Tipper
Visit us at www.hamelexwhite.com.auA division of Maxitrans Australia Pty LtdABN 95 081 151 699
Construction Constructed from high tensile steel plate and sections
Floor 5mm high tensile steel plate welded directly to main bearers and cross bearers
Walls 3mm high tensile steel plate continuous weld to coaming rail. 450 bottom corners
Tailgate3mm high tensile steel plate on SHS and RSA frame Top forward hinged (100mm) c/w demo latch. Manual operated tailgate
SuspensionYork Duratrac air bag suspension on York 2000 series steel 10 stud 285PCD 1840 track, grease filled axles
Braking system ADR approved dual line brake system
Hoists Hoist Hydraulics low friction, low profile hoist
Lighting Narva LED rear inserts and side lights
Standard equipment
Standard Equipment - Bridgestone R187 11R x 22.5 tubeless tyres - Fullchamp machine finished aluminium wheels - Dual underslung fixed wheel carrier - Glasurit 2 pack (non metallic) paint to all HXW steel work – 2 colours - 2 speed landing legs - Skid plate – 12mm reinforced, 50mm bolt in king pin
with removable block
Options
Assorted body heights & axle / suspension combinations, wheel, tyre, tarp, toolbox, water tank, air tailgate, access rungs, ladder options all available on request. Other configurations
available include tandem axle from 18.0m3 to tri axle 28.5m3 capacity.
Tare weight 9.00m Nominal7.600 ± 2%
Specifications
Steel Chassis Tipper
Manufactured by;Hamelex White175 South Gippsland HighwayDandenong(03) 8786 2100