STEEL BS S132
Transcript of STEEL BS S132
STEEL
libertyhousegroup.com
BS S132An alloy with high mechanical strength and hardenability This alloy can be used to produce nitrided parts, and in components subject to high stress
Heat treatment
Oil quench from 950°C and temper (600°C minimum)
Supply condition and availability
• Supplied as softened bright bar
• Stock sizes in range 18mm to 250mm diameter
• Other sizes available on request
BS S132| An alloy w
ith high mechanical strength and hardenability
LIBERTY SPECIALITY STEELS7 Fox Valley Way, Stocksbridge, Sheffield, S36 2JA, United Kingdom
T: + 44 (0) 114 288 2361 E: [email protected]
While care has been taken to ensure that the information contained in this publication is accurate, Liberty House Group does not accept responsibility or liability for information which is found to be misleading. ©Copyright 2018 Liberty House Group.
Chemical analysis
C Si Mn P S Cr Mo Ni Sn V
Min 0.35 0.10 0.40 3.00 0.80 0.15
Max 0.43 0.35 0.70 0.020 0.020 3.50 1.10 0.30 0.030 0.25
Mechanical properties of typical specifications Mechanical properties are BS S132 limits
Min Max
0.2% Proof stress (MP) 1130
Tensile Strength 1320 1470
Elongation % 8
Reduction of area 35
Izod Impact ft lbd 20
Hardness HB 388 429
Features and benefits
• High Strength (>1350 MPa)
• Excellent hardenability for high core strength
• Develops hard wear resistant case after surface treatment
• Excellent transverse properties in remelted material
Typical applications
• Gearbox shafts
• Crankshafts
• Engine Shafts
Technical support
We have a comprehensive technical support team available to advise on grade selection and product range to achieve the maximum benefit. Customer Technical support provide specialist advice and help with day-to-day problem solving.
Works based metallurgists and the full resources of our Steel Research and Development Laboratories are available to assist with longer-term developments.
For further information, enquiries or any technical guidance on our range of Aerospace products please contact our experts using the details below.
Related specifications
• 6910/1/2, 6119
• MAT 122
• (E) 40CDV12
• W 1. 8523
• DMD 0113-20
• (E) 40CDV12
• W 1. 8523
• DMD 0113-20