STE Products Carteles · The model STE TP G is a high shear mixer granulator designed to optimize...
Transcript of STE Products Carteles · The model STE TP G is a high shear mixer granulator designed to optimize...
MAIN FEATURESIn Wall design.Top cover “no contact” easy to clean.PLC Siemens to manage the equipment with operator interface by PC panel. Automatic impeller lift.Central impeller and side chopper with double lip
product loss.Granulation end point control by time or torque.
STE TPG | STE TP G HIGH SHEAR MIXER GRANULATOR
OPTIONALS ACCESSORIES Binder preparation reactor with peristaltic pump Heating/cooling jacket. ATEX version. Product automatic charge and discharge by vacuum Integrated wet conic mill calibrator. Automatic cleaning system (WIP). Batch report with production statistical data. 21 CFR part 11 compliance module. Working platform adapted to end lay-out.
LAB
2/5/10
0,57,530
300Var. 300a
3.000
25
25
717
30200
1.5003.000
50
50
153330
1501.5003.000
100
100
336630
1501.5003.000
200
200
6613025125
1.5003.000
300
300
10020020
1101.5003.000
400
400
13026020
1001.5003.000
600
600
20040020
1001.5003.000
800
800
26053020
1001.5003.000
1000
1000
30075020
1001.5003.000
Standard models*
Container capacity (L)Useful capacity Min.
Max.Impeller speed (rpm) Min.
Max.Chopper speed (rpm) (1)
(2)* Oth
er d
imen
sion
s on
requ
est
STE TECPHARMAvda. Universitat Autònoma, 13. Parc Tecnològic del Vallès. 08290 Cerdanyola del Vallès. Barcelona, España.
Tel: +34 93 592 31 00 / Fax: +34 93 592 31 31www.stetecpharm.com
The model STE TP G is a high shear mixer granulator designed to optimize wet granulation process with high density mixture and good repeatability. It includes features allowing control of granulation end point by time or torque.It has a bottom impeller and side chopper to guarantee the intensive mixing in a very short time period. Designed and built following GMP´s normative and pharmaceutical regulations.
STE TECPHARMAvda. Universitat Autònoma, 13. Parc Tecnològic del Vallès. 08290 Cerdanyola del Vallès. Barcelona, España.
Tel: +34 93 592 31 00 / Fax: +34 93 592 31 31www.stetecpharm.com
STE TPS | FLUID BED DRYERComplete solution for 3 possible applications in the same equipment:
- Drying of wet granulate.
- Granulation by top spray system.
- Film coating for micro granules by bottom spray.
In wall design for maximum optimization of the production area.
Possibility to be integrated with wet granulator in a closed system by vacuum charge. Designed and built following
GMP´s normative and pharmaceutical regulations.
MAIN FEATURES OPTIONALS ACCESSORIESIn Wall design. Standard equipment resistant to 10 bar pressure. Parts in contact with the product in AISI316L polished RA ≤ 0,4 μm. Parts no contact with the product in AISI304 satin RA ≤ 0,8 μm. Air handling unit with inlet and outlet HEPA filters. PLC Siemens to manage the equipment with operator interface by PC panel. Parameters control: Temperature, air flow, vacuum, and process time.
Pulse blow-back filters with fabric bags or cartridges without stopping the process.
Granulation by top spray system. Coating of micro granules by bottom spray system. ATEX version. Product automatic charge and discharge by vacuum. Taking of samples device during process. Calibrator for dry mix. Automatic cleaning system (WIP). Batch report with production statistical data. 21 CFR part 11 compliance module. Bag-in bag out system in outlet AHU, for high potency products.
LAB1&2
5/101.07.50.54.5
30
308
255
15
60
6015459
27
110
11025841550
220
2205516733100
440
44011033366
200
660
66016550099
300
880
880250668150400
1100
1100334834200500
Standard models*
Container capacity (L)Useful capacity (L) Min. Max.Working range in Kg Min.(Density = 0,6 Kg/l) Max.
* Oth
er d
imen
sion
s on
requ
est