STAY - howgroup.com.au€¦ · Ø 65 mm black soft band Black Polyamide - Ø 67,5 cm Black...
Transcript of STAY - howgroup.com.au€¦ · Ø 65 mm black soft band Black Polyamide - Ø 67,5 cm Black...
www.actiu.com
STAYBy Alegre Design
STAY
02www.actiu.com
1
2
4
3
C
5
E
4 pos. 0º
30º
B
A
D
AUTO-WEIGHT SYNCHRO CONTROL
Synchro mechanism auto-weight control, it adapts automatically to the user weight.In order to adjust and customize the tension to special user requirement there is a knob underneath of the seat (A).
STAY includes 4 back tilt positions offering tilt angles from 10º at the up-right blocked position up to 30ºat the maximum angle, to adjust and select the tilt angle of the back just turn the end of the knob underneath of the seat (B).
SEAT HEIGHT ADJUSTMENT
The seat height is adjusted using a gas-lift by lifting up the knob under the seat (D). (Lowest seat height: 39 cm/Maximum seat height: 50 cm)
SEAT SLIDE (TRASLA)
Ideal feature to adjust the distance between the seat and the back adapting the chair to different user anthropometrics.Pull out the lever (C) and fix it back in 7 different positions. The system includes an auto-return mechanism to return the seat to the back position when standing up while pulling the lever out.(total sliding distance = 7 cm / Each position offers 10 mm adjustment)
Tension Control Knob
Gas lift - Syncro Model
Gas lift - Gas lift Model
Backrest máximum and mínimum height
Sliding seat lever7 different positions.Depth adjustment with auto-return mechanism
LUMBAR ADJUSTMENT
STAY offers a lumbar height adjustment system (E) manufactured with a flexible and adaptable material with an adjustment range of 5 cm. A combination of use of mesh materials and lumbar adjustment provides a fully adaptable solution strengthening the support on those points where the tension is higher.
4 Back tilt positions control
FEATURES
AIRFLOW COMFORT SYSTEM
The seat has been designed with air chambers, to improve comfort, flexibility and the distribution of pressure for any user.
The lumbar backs made of polypropylene are offered in a standard way finished the same as frame of the back of the chair.
Technical Profile
7 cm
39 cm 50 cm
STAY
03www.actiu.com
7
9
8
360º
7 po
s.F
7 pos.
360º
7 pos.
H H
G
G
OPTIONAL HEAD-REST
5 PO
SITI
ONS
Technical mesh upholstered
CASTORS AND CAPS
Weight control castors
Black castor Black capsAntistatic castors
ADJUSTABLE ARM-REST
STAY offers 2 arm options: aluminium or polypropylene arms.Height adjustment: adjustable using the knob under the arm-rest (F), it offers 7 height positions.Distance between arms: Manual width adjustment using the level under the seat (G), each arm range adjustment is 3 cm, so maximum total width is 6 cm.360º Swivel arm system (Anti-panic): Only available with the aluminium arm option, 360º Swivel arm movement allowing horizontal rotation of arm rests.
Height adjustable arm
Polypropylene arms. Manual width adjustment
POLYPROPYLENE ARM
ALUMINIUM AND POLYPROPYLENE ARM
Available a Head-rest for Stay model. (25,5 x 16,5 cm). Polypropylene (PP) frame +35% fiber glass (White or black), technical mesh upholstered or TEX upholstered. Polypropylene(PP) fixing and adjustable piece. 5 Different positions. Maximum Height adjustment 2’’ 3/8. Tilt mechanism.
BlackWhite
FINITIONS
Soft band 65 mm anti-skid castors in black finish. Optional Security castors with auto-lockable system, avoiding the undesired chair move (when sitting the castors move normally but when stand up the castors auto-lock). Black Polypropylene (PP) caps with antiskid rubber.
FEATURESTechnical Profile
LOCKED
- without movement(Only in positions 0º and
180º)
UNLOCKED
- with movement360º Swivel arm movement
21,5
a 2
7,5
cm
25,5 cm
16,5
cm
7 cm
7 cm
STAY
04www.actiu.com
1
2
3
A correct posture at work to avoid physical problems
Different ergonomics conditions and specific mobility for each task
Incorrect Postures
Seat adjustment.Forearms must be parallel to the desk top as in a right angle with the rest of the arm. Both feet must be lean on the floor and knees must be in right angle too.
It is necessary to alternate daily dynamic and static tasks.
Dynamic tasks.Document manipulation, communication and so on…Select positions 2 ,3 or 4 on the back tilt adjustment knob. Put the arms in the lowest position.
Torsion.Flexible back whose movements go naturally with the user action.
Static workDocument analysis and writing, intensive computer work...Select position 1 on the back tilt adjustment knob. Put the arms in the lowest position.
Key points.1. A lower position from the desk produces neck pain.2. An incorrect back support produces lumbar problems.3. Legs too stretched or too vended causes body joints over-stressed.
Adjustable arms (7 positions)Place the chair arms in the lower position to get better mobility. For statics works, adjust height and distance to that point where the forearms perfectly lean.
Lumbar Support AdjustmentAdjust the Lumbar support height to get the back totally rested and the weight totally supported.
Dynamic tasks.
Torsion.
ERGONOMICSTechnical Profile
STAY
05www.actiu.com
FABRICTechnical Profile
TECHNICAL MESH BACK REST
TEX BACKREST
BACKREST AND SEAT
Fabric M - Melang & Step
Fabric D - Felicity
Fabric T - Newport
SEAT
BACK
Fabric M - Melang & Step
Fabric D - Felicity
Fabric A - Synergy
Fabric R - Rhythm
Fabric Q - SpinFabric R - Rhythm
Fabric H - Harlequin
Fabric H - HarlequinFabric String
Fabric T - Newport
STAY
06www.actiu.com
1 2
34
5
6 7
11
10
89
A
B
C
D
Operative office chair, 5 Star base; aluminium base and polyamide with glass fiver (FV). Anti-skid castors standard use (65 mm) or weight control use.
Backrest PP with glass fibre (PP + 30% G.F.) frame. Uphosltered with foamized fabric composed of polyurethane foam 5mm + fabric ”T”.The seat has been designed with air chambers, to improve comfort, flexibility and the distribution of pressure for any user. Seat with PU (polyurethane) flexible molded foam density of 55-60 kg/m3 black polypropylene with glass fibre (PP+20% G.F.) cover seat with injected foam upholstered with fabrics. Height adjustable system by gas lift. Depth seat adjustment (70 mm). Return spring system.
DESCRIPTION
Adjustable lumbar support
Moulded Flexible foam back rest.
Polypropylene frame manufactured with glass fiber (PP + 30% G.F.)
Gast lift
Anti-skid castors, hole weight control castor or standard castors
4 back tilt positions control
5 star base. Moulded aluminium or polyamide base with glass fiber
Seat slide (Trasla)
Seat height: from 390 mm to 500 mmSeat width: from 480 mm to 530 mmSeat depth: from 390 mm to 460 mm
Total height: from 940 mm to 1.050 mmTotal width: from 675 mm to 690 mmTotal depth: from 675 mm
Auto-weight synchro control mechanism
BASES AND CASTORS
Polished aluminium - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
Silver aluminium - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
White aluminium - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
Black Polyamide - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm soft band
White polyamide - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
WITH PIVOTING ARM 360º:
WITHOUT PIVOTING ARM 360º:
A. SEBS of 3 mm, B. ABS of 3 mm, C. Height adjustment, D. Component by solid aluminium 20 x 30 mm thickness or PP +30% F.V.
A. SEBS of 3 mm, B. ABS of 3 mm,C. Height adjustment, D. Component by Polypropylene with glass fiber
BACK
SEAT
(SEE FINISHES AND FABRIC CARD LAST PAGE)
(SEE FINISHES AND FABRIC CARD LAST PAGE)
Technical Profile
SIZES
Seat with ACS technology (airflow comfort system). Injected foam seat upholstered in different finishes
1
2
3
4
5
6
7
9
8
10
11
TEX BACK REST
*Measures according to UNE-EN 1335-1
Ø67,5
45,5
94-1
0552,5
52,5
39-5
0
39-4639-46 47/53
Ø67,5
45,5
94-1
05
39-5
0
48/53
STAY
07www.actiu.com
1
2
34
5
6 7
11
10
8
9
A
B
C
D
Operative office chair, 5 Star base; aluminium base
and polyamide with glass fiver (FV). Anti-skid castors
standard use (65 mm) or weight control use.
Backrest, PP with glass fibre (PP+30% G.F.)
frame, elastic technical mesh. Breathable.
Moulded polypropylene.
The seat has been designed with air chambers, to
improve comfort, flexibility and the distribution of
pressure for any user. Seat with PU (polyurethane)
flexible molded foam density of 55-60 kg/m3 black
polypropylene with glass fibre (PP+20% G.F.) cover
seat with injected foam upholstered with fabrics.
Height adjustable system by gas lift. Depth seat
adjustment (70 mm). Return spring system.
DESCRIPTION
Adjustable lumbar support
Back rest, technical and ergonomic fabric
Polypropylene frame manufactured with glass fiber (PP + 30% G.F.)
Gast lift
Anti-skid castors, hole weight control castor or standard castors
4 back tilt positions control
5 star base. Moulded aluminium or polyamide base with glass fiber
Seat slide (Trasla)
Seat height: from 390 mm to 500 mmSeat width: from 480 mm to 530 mmSeat depth: from 390 mm to 460 mm
Total height: from 1.005 mm to 1.095 mmTotal width: from 675 mm to 690 mmTotal depth: from 675 mm
Auto-weight synchro control mechanism
BASES AND CASTORS
Polished aluminium - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
Silver aluminium - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
White aluminium - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
Black Polyamide - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm soft band
White polyamide - Ø 67,5 cmBlack anti-skid castor, Ø 65 mm black soft band
WITH PIVOTING ARM 360º:
WITHOUT PIVOTING ARM 360º:
A. SEBS of 3 mm, B. ABS of 3 mm, C. Height adjustment, D. Component by solid aluminium 20 x 30 mm thickness or PP +30% F.V.
A. SEBS of 3 mm, B. ABS of 3 mm,C. Height adjustment, D. Component by Polypropylene with glass fiber
BACK
SEAT
(SEE FINISHES AND FABRIC CARD LAST PAGE)
(SEE FINISHES AND FABRIC CARD LAST PAGE)
Technical Profile
SIZES
Seat with ACS technology (airflow comfort system). Injected foam seat upholstered in different finishes
1
2
3
4
5
6
7
9
8
10
11
TECHNICAL MESH BACK REST
*Measures according to UNE-EN 1335-1
Ø67,5
45,5
94-1
0552,5
52,5
39-5
0
39-4639-46 48/53
Ø67,5
45,5
94-1
05
39-5
0
48/53
STAY
08www.actiu.com
UNE-EN ISO 9001:2008EN ISO 14006:2011 UNE-EN ISO 14001:2004PEFC/04-31-0782
52,56%
100%
92,85%
100%
ACTI
U PRODUCE Y UTILIZA TABLEROSCLASE E1 STANDARD - NORMA EUROP
EA
EN 13986
E1
STAY has passed tests done in our technical department as well as the tests done in AIDIMA the Technological Institute for furniture. The
tests correspond to:
Office chairs, Standard from 2009
- UNE-EN 1335-1:01. Office furniture. Office chair. Part 1: About dimensions
- UNE-EN 1335-2:09. Office furniture. Office chair. Part 2: Security requirements
- UNE-EN 1335-3:09. Office furniture. Office chair. Part 3:Security tests.
Technical Profile ECODESIGN
CERTIFICATES AND REFERENCES
The different programmes get points in different environmental categories to get the LEED certificate (sustainability, material and resources, water, energy
and atmosphere, inner environment quality, innovation and design).
ALUMINIUM, STEEL & WOOD
DISPOSAL
MATERIALS
Maximum optimization of energy use. Minimal environmental impact. Last generation technological systems. Zero discharge of wastewater. No VOC coatings. Processes free of heavy metals, phosphates, OC and COD.
PRODUCTION
Quality and warranty. Long lasting. Replacements available.USE
Detachable systems. Volumes that facilitate the optimization of space. Maximum reduction of energy consumption by transport.
TRANSPORT
Maximum use of materials to eliminate and minimize scraps. Use of recyclable and recycled materials in those components that do not affect the functionality and durability.
Waste reduction. Supplier-manufacturer packaging reuse system. Components are easy to be separated. Inks in packaging are water-based, without solvents.
PACKAGE AND THINNERFREE
RECYCLED MATERIALS
RECYCLABLE
RECYCLABLE
TO CLEANAND MAINTAIN
RECYCLABLE MATERIALS
EASY
PEFC Certificate ISO 9001 CertificateECODESIGN Certificate ISO 14001 CertificateThe mark of responsable forestry
E1 Certificate by EN 13986