STAUFF-VALVES-Product-Overview-03-2011-EN
6
Local Solutions For Individual Customers Worldwide Product Overview Valves Two-Way Ball Valves Multi-Way Ball Valves Flow Control Valves Gauge Isolator Valves
-
Upload
nigel-roberts -
Category
Documents
-
view
75 -
download
2
Transcript of STAUFF-VALVES-Product-Overview-03-2011-EN
Local Solutions For Individual Customers Worldwide
Product Overview
Valves
Two-Way Ball Valves
Multi-Way Ball Valves
Flow Control Valves
Gauge Isolator Valves
Product Overview Valves
www.stauff.com
Originating and located in Werdohl in the German Sauerland region, we have become an internationally leading developer, manufacturer and supplier of pipework components, measuring equipment and hydraulic accessories.
���� ����������������������������!��� ��� �"������ ����������������������manufacturing technologies and a foresighted management give us the reputation of being a competitive partner.
Our in-house laboratories carry out constant tests in line with international standards ���������� ������#������ ��������� �����$����ISO 9001:2008 (Quality), DIN EN ISO 14001:2004 (Environmental Protection) and OHSAS 18001:2007 (Occupational Health and Safety), our management system continually strives for perfection.
Many of our products have been successfully tested and approved by several international organisations and institutes.
%���$��������'� �$������������ �*����;������ �������������������������������������and short delivery times.
Represented by a tight network of distributors and wholly-owned manufacturing facilities, distribution bases and warehouses in 15 countries worldwide, we are also close to you.
Our subsidiaries also supply additional retail products related to the hydraulics �� ������������;����������������������������������� ��������������'������ �����
That´s STAUFF
Valves Product Overview
www.stauff.com
Machined slot indicates ball bore position.Machined stop pin assures positive closing / opening, eliminates seat degradation due to ball misalignment.
Blow out proof stem design. Bottom loaded for safety.
Primary stem seals made of Delrin® (POM), also acting as a bearing surface between body and stem.
O-rings made of FPM (Viton®) are standard. NBR (Buna-N®) and EPDM sealings available.
Micro smooth Carbon Steel (hard-chrome plated) or Stainless Steel ball greatly reduces friction and seat wear.
NPT, SAE, BSP, ORFS, Metric and SAE flanged connectorsare available.
Heavy-duty body made of Steel or Stainless Steel for working pressures up to 800 bar / 12000 PSI and temperatures up to +500 °C / +930 °F(depending on size and materials)
Ball seats made of Delrin® (POM)
to assure low operating torque. Special ball seat materials available.
Secondary stem seals made of FPM (Viton®) are standard. NBR (Buna-N®) and EPDM sealings available.
No threads in fluid service to contaminate flow or cause turbulence.
1/4 turn positive operation.
"Floating Ball" design insures a positive, leak-free seal and automatically compensates for any seat wear or misalignment.
Cr(VI)-free zinc/iron coating guarantees extra ordinary high corrosion resistance
Full size ports on most two-way valves virtuallyeliminates pressure drop
Completely bidirectional operation, eliminating any chance of incorrect installation.
Two-Way Valves
High-Pressure Block Body Ball Valves
High-Pressure Forged Body Ball Valves
With threaded connections� Female BSP thread BBV2G ... � Female NPT thread BBV20 ... � Female UN/UNF thread BBV21 ... � Male O-ring face seal connection BBV2B ... � 24° Cone connection BBV2DN ...
With SAE split flange connectors � 3000 PSI series BBV22 ... � 6000 PSI series BBV23 ...
With SAE mating flange connectors � 3000 PSI series BBV2E ... � 6000 PSI series BBV2S ...
With threaded connections � Female BSP thread FBV2G ... � Female NPT thread FBV20 ... � Female UN/UNF thread FBV21 ... � Male O-ring face seal connection FBV2B ... � 24° Cone connection FBV2DN ...
With SAE split flange connectors � 3000 PSI series FBV22 ... � 6000 PSI series FBV23 ...
With SAE mating flange connectors � 3000 PSI series FBV2E ... � 6000 PSI series FBV2S ...
High-Pressure Round Body Ball Valves
For direct SAE flange connection � 3000/6000 PSI series BBV29 ... � 3000 PSI series BBV27 ... � 6000 PSI series BBV28 ...
For DIN flange connection � with butt weld ends BBVF ...
For ISO and CETOP flange connection � ISO 6164: 250 bar / 3600 PSI series BBVD1 ... � ISO 6164: 400 bar / 5800 PSI series BBVD2 ... � CETOP RP 63 H: 250 bar / 3600 PSI series BBVY1 ... � CETOP RP 63 H: 400 bar / 5800 PSI series BBVY2 ...
Highest-Pressure Block Body Ball Valves (up to 800 bar / 12000 PSI)
With threaded connections� Female NPT thread HBV20 ... � 24° Cone connection HBV2DN ...
Compact High-Pressure Manifold Ball Valves
With SAE mating flange connectors � 3000 PSI series KHZ27 ... � 6000 PSI series KHZ28 ...
High-Pressure Manifold Ball Valves
For manifold mounting � Either 4 or 6 mounting holes BBV25 ...
Product Overview Valves
www.stauff.com
Multi-Way Ball Valves
High-Pressure Manifold Ball Valves (3-way, L-bore)
For manifold mounting � Either 4 or 6 mounting holes BBV35 ...
Pressure inlet possible from center port only!
For manifold mounting � Either 4 or 6 mounting holes BBVS35 ...Pressure inlet possible from all ports!
‘
With threaded connections � Female BSP thread CBV3G ... � Female NPT thread CBV30 ... � Female UN/UNF thread CBV31 ... � 24° Cone connection CBV3DN ...Pressure inlet possible from center port only!
With SAE mating flange connectors � 6000 PSI series CBV38 ...Pressure inlet possible from center port only!
With threaded connections � Female BSP thread CBVS3G ... � Female NPT thread CBVS30 ... � Female UN/UNF thread CBVS31 ... � 24° Cone connection CBVS3DN ...Pressure inlet possible from all ports!
Compact High-Pressure Block Body Ball Valves (3-way, L-bore)
High-Pressure Block Body Ball Valves (3-way, L-bore)
With threaded connections� Female BSP thread LBV3G ... � Female NPT thread LBV30 ... � Female UN/UNF thread LBV31 ... � 24° Cone connection LBV3DN ...
High-Pressure Block Body Ball Valves (3-way, T-bore)
With threaded connections � Female BSP thread TBV3G ... � Female NPT thread TBV30 ... � Female UN/UNF thread TBV31 ... � 24° Cone connection TBV3DN ...
High-Pressure Block Body Ball Valves (4-way, T-bore)
With threaded connections � Female BSP thread TBV4G ... � Female NPT thread TBV40 ... � Female UN/UNF thread TBV41 ... � 24° Cone connection TBV4DN ...
High-Pressure Block Body Ball Valves (4-way, double L-bore)
With threaded connections � Female BSP thread XBV4G ... � Female NPT thread XBV40 ... � Female UN/UNF thread XBV41 ... � 24° Cone connection XBV4DN ...
Example 2
Example 1
This nomogramm provides a guide for the determination of the nominal diameter >�?[��\���������� ����������������$����*��$������������;�������� �����]
Suction lines: 0,5 ... 0,8 m/sec (.15 ... .24 ft/sec)Return lines: 2,0 ... 4,0 m/sec (.61 ... 1.22 ft/sec)Pressure lines >10 MPa: 2,0 ... 4,0 m/sec (.61 ... 1.22 ft/sec)Pressure lines >50 MPa: 3,0 ... 12,0 m/sec (.91 ... 3.66 ft/sec)
Example 1
Velocity v = 8 m/sec (2.44 ft/sec) / Flow rate Q = 150 l/min (40 US GPM)
The straight line linking these two values on the outer scales intersects the nominal diameter DN 20 on the middle scale.
Example 2
Velocity v = 5,5 m/sec (1.68 ft/sec) / Flow rate Q = 66 l/min (17 US GPM)
The straight line linking these two values on the outer scales intersects the nominal diameter DN 16 on the middle scale.
Please note:
No allowance is incorporated for the resistance of the pipes, elbows and valves, viscosity, the effect to temperature on viscosity and other factors. Consult STAUFF for further information.
Product Overview Valves
www.stauff.com
Flow Control Valves
Throttle and Shut-Off Valves
For in-line assembly� Female BSP thread DV ... B � Female NPT thread DV ... N � Female UN/UNF thread DV ... S
For manifold mounting � Either 4 or 6 mounting holes DVP ...
For cartridge assembly � Male BSP thread DVE ... B
Flow Control Valves
For in-line assembly � Female BSP thread DRV ... B � Female NPT thread DRV ... N � Female UN/UNF thread DRV ... S
For in-line assembly (pressure compensated) � Female BSP thread PNDRV ... B � Female NPT thread PNDRV ... N � Female UN/UNF thread PNDRV ... S
For manifold mounting � Either 4 or 6 mounting holes DRVP ...
Check Valves
For in-line assembly� Female BSP thread RV ... B � Female NPT thread RV ... N � Female UN/UNF thread RV ... S
For in-line assembly � Female BSP thread RVM ... B � Female NPT thread RVM ... N
Gauge Isolator Valves
Single Station Gauge Isolator Valves
� Female BSP thread SWS-B04-S1 � Female NPT thread SWS-N04-S1
� BSP/BSP thread SWS-B04-A ... � NPT/NPT thread SWS-N04-A ... � NPT/UNF thread SWS-S04-A ...
� Female BSP thread SWS-B04-M � Female UN/UNF thread SWS-U04-M
Multi Station Gauge Isolator Valves
Product ApplicationsMobile Applications � Construction, forestry, agricultural and mining equipment
� Ship building � Lifting and material handling � etc.
Industrial Applications � Machine and plant engineering � Production, transportation and processing of oil and gas (on-shore and off-shore)
� Chemical and food processing industries � etc.
�
�
Figure: 1. Voith Paper GmbH & Co. KG; 2. Herrenknecht AG; 3. Terex GmbH; 4. ThyssenKrupp Marine Systems AG
�
�
Local Solutions For Individual Customers Worldwide
AUSTRALIASTAUFF Corporation Pty. Ltd.P. O. Box 227Wollongong, NSW, 2526 24-26 Doyle AvenueUnanderra, Wollongong, NSW, 2526Tel.: +61 2 4271 18 77Fax: +61 2 4271 84 [email protected]
BRAZILSTAUFF Brasil Ltda.Avenida Gupê 10767Galpão 2 - Bloco ABarueri - São PauloCEP 06422-120Tel.: +55 11 47 72 72 00Fax: +55 11 47 72 72 [email protected]
CANADASTAUFF Canada Ltd.866 Milner AvenueScarboroughOntario M1B 5N7Tel.: +1 416 282 46 08Fax: +1 416 282 30 [email protected]
CHINA STAUFF International Trading(Shanghai) Co., Ltd.No. 41-42, Lane 369, Chuang Ye RoadJushuo Industrial Zone, Kang QiaoShanghai, 201319Tel.: +86 21 68 18 70 00Fax: +86 21 68 18 71 [email protected]
FRANCESTAUFF S.A.S.230, Avenue du Grain d‘OrZ.I. de Vineuil - Blois Sud41354 Vineuil-cedexTel.: +33 2 54 50 55 50Fax: +33 2 54 42 29 [email protected]
GERMANY Walter Stauffenberg GmbH & Co. KGP. O. Box 174558777 Werdohl Im Ehrenfeld 458791 WerdohlTel.: +49 23 92 916 0Fax: +49 23 92 916 [email protected]
INDIA STAUFF India Pvt. Ltd.Gat. No. 2340Pune Nagar Road, WagholiPune, 412207Tel.: +91 20 66 20 2473Fax: +91 20 27 05 1567������������ ������
IRELANDSTAUFF Ireland Ltd.Block B9 Ferguson DriveKnockmore Hill Industrial EstateLisburnAntrimBT28 [email protected]
ITALY STAUFF Italia s.r.l.Viale Nuova Valassina 78angolo Via Baragiola sn20832 Desio (MB)Tel.: +39 0362 63 80 70 Fax: +39 0362 63 80 [email protected]
KOREASTAUFF Korea Ltd.1500-12, Dadae-DongSaha-KuPusan, 604-826Tel.: +82 51 266 66 66Fax: +82 51 266 88 [email protected]
NEW ZEALAND STAUFF Corporation (NZ) Ltd.P. O. Box 58517Greenmount, AucklandUnit D, 103 Harris Road East Tamaki, AucklandTel.: + 64 9 271 48 12Fax: + 64 9 271 48 [email protected]
POLAND STAUFF Polska Sp. z o.o.Miszewko 43 A80-297 Banino Tel.: +48 58 660 11 60Fax: +48 58 629 79 [email protected]
RUSSIAN FEDERATION STAUFF LLCBuilding 119, Leninskaya SlobodaMoscow, 115280Tel.: +7 495 276 16 50 +7 495 223 89 61Fax: +7 495 276 16 [email protected]
UNITED KINGDOM STAUFF UK Ltd.500, Carlisle Street EastOff Downgate Drive������ ��������Tel.: +44 114 251 85 18Fax: +44 114 251 85 [email protected]
UNITED STATESSTAUFF Corporation7 Wm. Demarest PlaceWaldwick, 07463-1542New JerseyTel.: +1 201 444 78 00Fax: +1 201 444 78 [email protected]
Globally available through wholly-owned branches and distributors in all industrialcountries.
www.stauff.com
Product Overview VALVES � English � 9910000185 � 04/2011
