STATUS UPDATE€¦ · •Demo of model predictive control Project: DOCPCC (SINTEF, TCM, NTNU and...
Transcript of STATUS UPDATE€¦ · •Demo of model predictive control Project: DOCPCC (SINTEF, TCM, NTNU and...
Hanne Kvamsdal
SINTEF Materials and Chemistry
STATUS UPDATEInternational Test Center Network Meeting
Beijing, June 7 2017
• Demo of model predictive controlProject: DOCPCC (SINTEF, TCM, NTNU and Cybernetica)
• Solvent testingProject just started: External client
• Non-aqueos solvent testing (cont.) Project: RTI-NAS-PILOT (RTI International and SINTEF)
• Absorber aerosol test campaign
Flue gas pre-treatment testing
Project: Aerosolve (SINTEF, TCM, NTNU, Uniper, TNO,
Engie Road CCS)
• Continuation of Aerosolve and DOCPCC
for the CESAR1 solvent systemProject: Part of ALIGN-CCUS (start August 1, 2017)
Ongoing and near future pilot campaigns
2
• New burner for coal, biomass or propane
• Some initial operating challenges
• Flexible flue gas pretreatment facility
• New equipment for flue gas
manipulation and measurements
Status new flue gas pilot facility
3
CO2 absorptionpilot
SO2 absorptionpilot
CO2 membranepilot
Propane burner DCCSCR
Aerosol dosing
Dilution air
Recirculated CO2
Recirculated SO2
Dust/aerosol dosing
WESP BDU
Coal/bio burner
FLUE GAS SOURCEFLUE GAS PRE-TREATMENT
AND MANIPULATION CAPTURE PILOTS
FGD
Flue gas characterization (analytical package)New technologies
piloting!
Gas heater
Baghouse filter
Cyclones
Gas cooler
• NMPC control functionality
integrated with existing control
system at Tiller
• When active – some parameters
are controlled from this unit
• The software has been
successfully tested for 4 weeks in
April/May
• The same tests will be conducted
at TCM in June/July
DOCPCC – ongoing project
4
Status membrane rig
5
1-10m2
45m3/hr
15cm2-0.1m2
2m3/hr
• Real flue gas pilot scale membrane test
facility – good flexibility in testing various
membrane modules and their
configuration with changing operation
parameters (flow rate, P, T, etc.)
o Recently confirmed a state-of-the-art membrane
developed with NTNU and sold license to use its
related technology to USA
• Real flue gas lab-bench scale membrane
test facility – even wider flexibility,
especially high pressure and high
temperature also with changeable flow
rate and membrane modules, etc.)
o Under construction, to be operable in summer of 2017
• Monitoring and mitigation of aerosol
related solvent emissions in post
combustion CO2 capture
• Project partners: SINTEF, TCM, Road
CCS, NTNU, TNO, Uniper, Engie
• Co-funded by the Climit-demo program
• Modelling, measurements, pilot- and
demo test campaigns at SINTEF and
TCM
• Status: Kick-off meeting last week
AEROSOLVE-project
6
• Phase Doppler Interferometer (PDI)
• Electrostatic Low Pressure Impactor (ELPI)
• Condensation Particle Counter (CPC)
• Collecting Aerosol Filters
• In-situ impactor aerosol separation
• Improved FTIR
• SINTEF prototype Mark1 for online
measurements of solvent and trace gas
compounds (nitrosamines, degradation
products) in gas, solvent and waterwash
Further strengthening of instrumentation for aerosol measurements
7
• Library of process unit models
established, can be utilized in
many applications
• Library of many solvent systems
(various thermodynamic models
and system properties)
• CO2SIM steady state simulator at
present, plan to extent to
dynamics
• Has been invited to be member of
the CCSI2 Industry and Academic
Stakeholder board
Modelling activities in SINTEF
8
Technology for a better society
9