State of Hawaii Department of Labor & Industrial Relations

Workforce Development Division

EEO Employer/Program Manager

This publication is 100% federally funded.

G

U

I

D

E

T

O

STATE

REGISTERED

CONSTRUCTION

APPRENTICESHIP

PROGRAMS

REVISED SEPTEMBER 2017

Aloha: Apprenticeship is a system of training in which a person learns a trade through on-the-job experience and related classroom instruction. The apprenticeship programs described here are developed and operated by labor unions and/or employer organizations representing the various trades. These programs are registered with the Department of Labor and Industrial Relations which is responsible for ensuring that they operate in compliance with the standards for safeguarding the welfare of apprentices. This booklet contains information about all of the construction trades apprenticeship programs currently registered with the State of Hawaii, Department of Labor and Industrial Relations. It lists data that individuals considering a career in the construction trades may need to make an informed decision. We hope that you will find this booklet helpful. Sincerely,

Elaine Young, Administrator Workforce Development Division

INDEX

Page Boilermaker ………………………………………………… 1 Bricklayer-Mason (Union) .................................................... 2 Carpenter (Non-Union) ......................................................... 3 Carpenter (Union) ................................................................. 4 Cement Finisher (Union) ...................................................... 5 Construction Craft Laborer (Union) ..................................... 6 Drywall, Accoustic, and Lather Installer (Union) ................ 7 Electrician (Wireperson) (Union) ......................................... 8 Electrical Wireperson (Union) .............................................. 9 Electrician (Non-Union) ....................................................... 10 Elevator Constructor (Union) ............................................... 11 Fire Sprinkler Fitter (Union) ................................................. 12 Floor Layer (Union) .............................................................. 13 Glazier (Union) ..................................................................... 14 Heat and Front Insulators (Union) ………………………….15 Ironworker (Fabricator) (Union) ........................................... 16 Ironworker (Reinforcing) (Union) ........................................ 17 Ironworker (Structural) (Union) ........................................... 18 Operating Engineer (Union) ................................................. 19 Painter (Non-Union) ............................................................. 20 Painter (Non-Union) ............................................................. 21 Painter (Union) ...................................................................... 22 Plasterer (Union) ................................................................... 23 Plumber (Non-Union) ........................................................... 24 Plumber (Union) ................................................................... 25 Pointer-Caulker-Weatherproofer (Union) ............................. 26 Refrigeration-Air Conditioning (Pipefitter) (Union) ............ 27 Roofer (Non-Union) .............................................................. 28 Roofer (Union) ...................................................................... 29 Sheetmetal Worker (Union) .................................................. 30 Steam Fitter/Welder (Union) ................................................ 31 Stonemason (Union) ............................................................. 32 Tile Setter (Union) ................................................................ 33 Taper (Union) ........................................................................ 34

UNION BOILERMAKER

Boilermakers construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Aligns structures or plate sections to assemble tanks or vats, following blueprints. Inspects and repairs boiler fittings. Apprenticeship Program requires satisfactory completion of 6,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school graduate or GED equivalent Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Western States Area Joint Apprenticeship Committee P.O. Box 1612 Page, Arizona 86040 Phone: (928) 645-0277 No training staff currently based in Hawaii MISC. INFO: For more information see:

http://www.westernstatesjac/org/ For military veterans, also see: http://www.helmetstohardhats.org/

1

UNION BRICKLAYER-MASON

Bricklayer-masons build and repair walls, partitions, fireplaces, and other structures with brick, cinder-block, structural tile, and other masonry materials. They cut, lay, and set their materials using trowels, brick hammers, and jointing tools. They determine vertical and horizontal alignment with plumb bobs, gauge lines, and levels. They may also weld metal supports for bricks. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 16+ High school graduate or GED equivalent Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Masons Training Office 1188 Sand Island Parkway Honolulu, HI 96819 Phone: 848-0565 Fax: 847-7068 MISC. INFO: For more information see:

http://www.bacweb.org/ For military veterans, also see: http://www.helmetstohardhats.org/

2

UNION TAPER This covers all stocking and mixing of materials, all work involved in application by hand or automatic tools the embedding of tape-both paper and fiberglass, the application of skim coats over tape, detail work, nail spotting, application of outside corner guards and edge trim, filling corner guards and edge trim, finishing of angles, sanding, finishing and final check out to include punch list, the surface preparation and application of simulated acoustical spray, the preparation of surfaces to receive paint, wallpaper or textures on both new and re-do surfaces, the application of all textures or synthetic coatings systems-both interior and exterior, all masking and cleanup in connection with the above work, along with the erection and disassembling of scaffolding which support workers in performing the above. Apprenticeship Program requires satisfactory completion of 8,000 hours of work, industry related study, and safety certification. MIN. REQMTS: Age 18+ Physically able to perform duties of the trade Driver’s license High school diploma or equivalent RECRUITMENT: Applicants shall be selected on a non-discriminatory

basis. If there are no unemployed apprentices, the employer may hire anyone who meets the minimum qualifications.

CONTACT: Tapers Local Union 1944 2240 Young Street Honolulu, HI 96826 Phone: 941-0991 Fax: 946-6623 MISC. INFO: For more information see: http://www.dc50.org/ For military veterans, also see: http://www.helmetstohardhats.org/

34

UNION TILE SETTER

Tile setters apply tiles to walls, floors and ceilings for decoration. Following design specification, they measure and mark the surface. They apply a coat of cement to the surface and set the tiles into place. After the cement has set, they apply a very fine cement mixture to fill the joints. If necessary, they cut and shape tiles with a sawing machine or a special cutting tool. They use trowels, levels, hammers, and chisels to set the tiles. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 16+ High school graduate or GED equivalent Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Masons Training Office 1188 Sand Island Parkway Honolulu, HI 96819 Phone: 848-0565 Fax: 847-7068 MISC. INFO: For more information see: http://www.opcmia.org/ For military veterans, also see: http://www.helmetstohardhats.org/

33

NON-UNION CARPENTER

Carpenters build, install, and repair structures and fixtures of wood, plywood, and wallboard. They erect structural framework and construct forms for concrete. They lay subflooring, build stairs, and erect scaffolding. Carpenters also install cabinets, windows, doors, paneling, and other wooden items in buildings. Carpenters study blueprints to determine the required materials and the dimensions. Using measuring tools, saws, hammers, and other equipment, they mark, cut, and assemble the materials. They verify trueness of structures with plumb bobs and levels. Work is commonly divided into two categories--rough and finish carpentry. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN REQMTS: Age 18+ High school diploma or GED

Full-time employee or a member company for a period of not less than six continuous weeks

Legally able to work Physically able to perform duties of the trade

RECRUITMENT: Sponsored by member company CONTACT: Associated Builders & Contractors, Inc. 1375 Dillingham Blvd., #200 Honolulu, HI 96817 Phone: 845-4887 Fax: 847-7876 MISC. INFO: For more information see: http://abchawaii.org/, click on “Apprentice

Program”.

3

UNION CARPENTER

Carpenters build, install, and repair structures and fixtures of wood, plywood, and metal/wallboard. They erect structural framework and construct forms for concrete. They lay subflooring, build stairs, and erect scaffolding. Carpenters also install cabinets, windows, doors, paneling, and other wooden items in buildings and homes. Carpenters study blueprints to determine the required materials and the dimensions. Using measuring tools, saws, hammers, and other equipment, they mark, cut, and assemble the materials. They verify trueness of structures with plumb bobs and levels. Work is commonly divided into 2 categories-rough and finish carpentry. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN REQMTS: Age 17+ High school diploma or equivalent work experience Pass basic math test Complete questionnaire Able to lift 75 lbs. RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Hawaii Carpenters Training Office 1311 Houghtailing Street, Room 201 Honolulu, HI 96817 Phone: 848-0794, x 5 Fax: 841-5961 or 841-0300 MISC. INFO: For more information see: http://www.carpenters.org/ For military veterans, also see: http://www.helmetstohardhats.org/

4

UNION STONEMASON Stonemasons erect stone structures and set stone exteriors. They build piers, walls and abutments; and lay walks and curbstones. They use two types of stone: natural cut stone, such as marble and granite, and artificial stone made from concrete and other masonry materials. They shape, set, and align the materials with chisels, hammers, mallets, trowels, crowbars, and plumblines. They remove dirt and excess mortar with a mild acid solution. They also use power tools for cutting and smoothing. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 16+ High school graduate or GED equivalent Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Masons Training Office 1118 Sand Island Parkway Honolulu, HI 96819 Phone: 848-0565 Fax: 847-7068 MISC. INFO: For more information see: http://www.bacweb.org/ For military veterans, also see: http://www.helmetstohardhats.org/

32

UNION STEAMFITTER WELDER Steamfitter Welders install and repair low and high pressure piping systems and their components, including heating, cooling and processing applications. They lay out, assemble, maintain and service pipe systems, pipe supports and related hydraulic and pneumatic equipment for steam, hot water, lubrication and industrial production, including petroleum fuel lines. They work with selected types and sizes of pipes, valves and hydraulic cylinders according to specifications. They measure, cut, thread, weld, braze, solder, bend pipe to join and fabricate sections of piping systems to be installed on job sites. Steamfitter Welders read and interpret drawings, blueprints and specifications to determine layout requirements for pipe in spaces, floors and ceilings. They inspect work sites to determine presence of obstructions and to ascertain that holes cut for pipes will not cause structural weakness. Welding is required. Apprenticeship Program requires satisfactory completion of 10,000 hours of work experience in the trade and 5 years, 10 semesters of related and hands-on instruction (108 hours per semester). Welder certification is required to complete the program. MIN. REQMTS: Age 17+ High school diploma or GED equivalent School transcripts Pass placement evaluation with a minimum score of 70% Driver’s license RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Plumbers/Pipefitters Training Office 720 Iwilei Road, Suite 222 Honolulu, HI 96717 Phone: 456-0585 Fax: 456-7131 MISC. INFO: For more information see: http://www.ua.org/ For military veterans, also see: http://www.helmetstohardhats.org/

31

UNION CEMENT FINISHER

Cement finishers finish surfaces of poured concrete floors, walls, sidewalks, and other construction projects to specified textures. They direct the pouring and supervise laborers who spread the concrete. Using straightedge, darbies, edgers, and floats, they level and smooth the concrete. They fill minor depressions and remove high spots with rubbing bricks and chisels. They also produce other finishes such as coarse, non-skid and pebble-like finishes. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN REQMTS: Age 16+ Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Masons Training Office 1188 Sand Island Parkway Honolulu, HI 96819 Phone: 848-0565 Fax: 847-7068 MISC. INFO: For more information see: http://www.opcmia.org/ http://www.bacweb.org For military veterans, also see: http://www.helmetstohardhats.org/

5

UNION CONSTRUCTION CRAFT LABORER Laborers perform a variety of tasks on construction projects, usually working with other trades, in a utility capacity transferring from one task to another. They measure distances from grade stakes, drive stakes, and stretch tight lines. They use bolt and nails to align blocks under forms. They work as signal operators to facilitate alignment, movement and adjustment of machinery. They level earth to grade specification using picks, shovels, and other equipment. They move, smooth and finish freshly poured concrete using float, trowel, or screed. They erect scaffolding, shoring, and braces. They mop, brush, or spread paint or bituminous compound to protect surfaces. They spray water, sand, steam, vinyl, paint or stucco through hoses to clean, coat, or seal surfaces, and apply caulking compounds to seal crevices. They grind, sand, or polish surfaces using abrasive tools or machines. Apprenticeship Program requires satisfactory completion of 4,000 hours of a combination of work and industry related study. MIN REQMTS: Age 18+ High school diploma or GED Driver’s license Successfully complete Pre-Construction Apprentice Evaluation Course RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Hawaii Laborers Training Program 96-138 Farrington Highway Pearl City, HI 96782 Phone: 455-7979 Fax: 456-8689 MISC. INFO: For more information see: http://www.liuna.org/ For military veterans, also see: http://www.helmetstohardhats.org/

6

UNION SHEET METAL WORKER The sheet metal worker is a highly skilled craftsperson who fabricates, installs, repairs and alters products made of sheet metal in construction, industrial and transportation work. Working from blueprints, plans and drawings, they use manual and power driven tools to cut, punch, drill, shape, fit, weld and solder pieces of metal. In construction, the work includes environmental controls, heating and cooling duct systems, storefronts, metal roofing and siding, gutter and downspout, food service equipment and other miscellaneous products. The sheet metal worker also does industrial work such as exhaust systems for paint spray booths, drying ovens, print shops, chemistry laboratories, welding rooms and boiler breeches and stacks. Along with the exhaust systems, sheet metal workers install systems that remove pollutants from the air before being discharged into the atmosphere. Apprenticeship Program requires satisfactory completion of 10,000 hours of work process and 1,050 hours of related instruction. MIN. REQMTS: Age 18+ High school diploma or GED Complete industry test Driver’s license Physically able to perform work RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Sheet Metal Workers JAC 1405 No. King Street, Room 403 Honolulu, HI 96817 Phone: 841-6106 Fax: 841-1842 MISC. INFO: For more information see: http://www.smwia.org/ For military veterans, also see: http://helmetstohardhats.org/

30

UNION DRYWALL, ACCOUSTIC, AND LATHER INSTALLER

Installs horizontal and vertical metal or wooden studs for attachment of wallboard on interior walls, using hand tools. Scribes measurements on wallboard using straightedge and tape measure, and cuts wallboard to size using knife and saw. Attaches wallboard to wall and ceiling supports using glue, nails, screws, hammer, or powered screwdriver. Uses a knife to trim rough edges from wallboard to maintain even joints. Nails prefabricated metal pieces around windows and doors and between dissimilar materials to protect drywall edges. May remove plaster, drywall, or paneling using crowbar and hammer. Usually works with others. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 17+ High school diploma or GED Complete questionnaire Pass basic math test Lift 100 lbs. RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Hawaii Carpenters Training Office 1311 Houghtailing Street, Room 201 Honolulu, HI 96817 Phone: 848-0794, x 5 Fax: 841-5961 or 841-0300 MISC. INFO: For more information see: http://www.carpenters.org./ For military veterans, also see: http://helmetstohardhats.org/

7

UNION ELECTRICIAN (WIREPERSON) Wirepersons install conduit, electrical wiring, fixtures and electrical apparatus in buildings and in industrial settings. Major duties include: planning/initiating projects; establishing temporary power; establishing grounding systems; installing electrical service; establishing power distribution within a project; planning and installing raceway systems; installing new and repairing old wiring; providing power and controls to motors, HVAC, and other equipment; installing receptacles, lighting systems, and fixtures; troubleshooting and repairing electrical systems; installing and repairing traffic signals, outdoor lighting and outdoor power feeders; installing fire alarm systems. 5-year Apprenticeship Program requires satisfactory completion of 10,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED Complete the National Joint Apprenticeship and Training Committee Math Course or one-year high school Algebra 1 Transcript of high school or post high school courses Pass industry aptitude test to qualify for oral interview Application fee (non-refundable) RECRUITMENT: Watch for announcements CONTACT: Hawaii Electricians Training Office 1935 Hau Street, Room 301 Honolulu, HI 96819 Phone: 847-0629 Fax: 843-8818 MISC. INFO: For more information see: http://www.njatc.org/apprentice.htm For military veterans, also see: http://helmetstohardhats.org/

8

UNION ROOFER Roofers cover and waterproof the roofs of buildings with composition materials, asphalt and gravel, or tiles. They also waterproof masonry and concrete walls and floors by applying liquid water-proofing compound. They follow established procedures in applying the various types of roofing materials. Roofers use hand tools such as hammers, roofing knives, mops, and caulking guns. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 16+ High school diploma or GED Driver’s license Physically able to perform duties of the trade Able to lift 100 lbs. RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Roofers Union, Local 221 2045 Kam IV Road, Room 203 Honolulu, HI 96819 Phone: 847-5757 Fax: 848-8707 MISC. INFO: For more information see: http://www.unionroofers.com/ For military veterans, also see: http://www.helmetstohardhats.org/

29

UNION ELECTRICAL WIREPERSON Wirepersons install conduit, electrical wiring, fixtures and electrical apparatus in buildings and in industrial settings. Major duties include: planning/initiating projects; establishing temporary power; establishing grounding systems; installing electrical service; establishing power distribution within a project; planning and installing raceway systems; installing new and repairing old wiring; providing power and controls to motors, HVAC, and other equipment; installing receptacles, lighting systems, and fixtures; troubleshooting and repairing electrical systems; installing and repairing traffic signals, outdoor lighting and outdoor power feeders; installing fire alarm systems. Apprenticeship Program requires satisfactory completion of 10,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED

Pass color-code test Pass aptitude test Transcript of high school or post high school courses

Pass one-year high school Algebra 1 (not Pre-Algebra) or higher Valid driver’s license RECRUITMENT: Watch for announcements CONTACT: Hawaii Electrical Workers 1617 Palama Street Honolulu, HI 96817 Phone: 841-5877 Ext 234 Fax: 847-7829 Website: N/A

9

NON-UNION ROOFER Roofers cover and waterproof the roofs of buildings with composition materials, asphalt and gravel, or tiles. They also waterproof masonry and concrete walls and floors by applying liquid water-proofing compound. They follow established procedures in applying the various types of roofing materials. Roofers use hand tools such as hammers, roofing knives, mops, and caulking guns. Apprenticeship Program requires satisfactory completion of 7,000 hours of work and industry related study. MIN. REQMTS: Age 18+ Full-time employee of a member company for a period of not less than six continuous weeks Legally able to work Physically able to perform duties of the trade Pass physical examination if required by Committee RECRUITMENT: Sponsored by member company CONTACT: Associated Builders & Contractors, Inc. 1375 Dillingham Blvd., #200 Honolulu, HI 96817 Phone: 845-4887 Fax: 847-7876 MISC. INFO: For more information see: http://abchawaii.org/, click on “Apprentice

Program”.

28

NON-UNION ELECTRICIAN Electricians layout, install, repair, and test electrical systems for heat, light, power, air conditioning, and refrigeration components. They install electrical machinery, controls, and electronic, signal and communication equipment. They follow blueprints. They measure, cut assemble and install electrical conduits, and pull electrical wires and make the connections. They test circuits for continuity and grounding. Electricians use screwdrivers, pliers, and other hand tools, pipe threaders, conduit benders, and test meters and power tools. Apprenticeship Program requires satisfaction completion of 10,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED Full-time employee of a member company for a period of not less than six continuous weeks Legally able to work Physically able to perform duties of the trade Pass eye examination for color blindness Completed one-year high school algebra (not pre-algebra) CONTACT: Associated Builders & Contractors, Inc. 1375 Dillingham Blvd., #200 Honolulu, HI 96817 Phone: 845-4887 Fax: 847-7876 MISC. INFO: For more information see: http://abchawaii.org/, click on “Apprentice

Program”.

10

UNION REFRIGERATION –AIR CONDITIONING (PIPEFITTER)

The refrigeration pipefitters lay out, fabricate, assemble, install and maintain pipe systems as well as design, install, maintain, troubleshoot and repair residential and commercial refrigeration and air conditioning equipment. Types of equipment often include household air conditioners and refrigerators to commercial air conditioners, refers and freezers, computer room air conditioners, building chiller plants and air handlers, to name a few. The pipefitter is required to interpret plans and specifications, use all tools of the trade to cut and connect, install piping and equipment, understand physics of liquids, gases, refrigerants, electricity and electrical controls. The refrigeration fitter must also follow EPA guidelines for handling refrigerants and understand public health safety in regard to the preservation of food andindoor air qualities. Apprenticeship Program requires satisfactory completion of 10,000 hours of work experience in the trade and 5 years, 10 semesters of related and hands-on instruction (108 hours per semester). MIN. REQMTS: Age 17+ High school diploma or GED School transcripts Pass placement evaluation with a minimum score of 70% Driver’s license RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Plumbers/Pipefitters Training Office 720 Iwilei Road, Suite 222 Honolulu, HI 96817 Phone: 456-0585 Fax: 456-7131 MISC. INFO: For more information see: http://www.ua.org/ For military veterans, also see: http://helmetstohardhats.org/

27

UNION ELEVATOR CONSTRUCTOR Elevator constructors assemble and install electric and hydraulic freight and passenger elevators, escalators, and dumbwaiters, determining layout and electrical connections from blueprints. They lay out location of framework, counter-balance rails, motor pump, cylinder, and plunger foundation. They drill holes in concrete or structural steel members with selected electric drills. They secure anchor bolts or weld brackets to support rails and frame-work, and verify alignment with plumb bob and level. They prefabricate sections of framework and other components to specified dimensions, using acetylene torch, power saw, and disc grinder. They install cables, counter weights, pumps, motor foundations, escalator drives, guide rails, elevator cars, and control panels using hand tools. They connect electrical wiring to control panels and electric motors. They install safety and control devices and position equipment on top of elevator shafts using hoists and cable slings. Apprenticeship Program requires satisfactory completion of 6,800 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED School transcripts Pass aptitude test (math, reading) Pass medical exam Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Int’l Union of Elevator Constructors #126 707 Alakea Street, Room 314 Honolulu, HI 96813 Phone: 536-8653 Fax: 537-3779 MISC. INFO: For more information see: http://iuec.org/ For military veterans, also see: http://helmetstohardhats.org/

11

UNION POINTER-CAULKER-WEATHERPROOFER Pointer-Caulker-Weatherproofers mix and apply external and internal applications of caulking to precast concrete on buildings. They do patching, masonry, and epoxy work on highways and roadway sealing. They perform a combination of duties on construction projects and usually work with other trades persons where demands require workers with varied experience and the ability to work without close supervision. They may use grinders and other abrasive tools and equipment. Apprenticeship Program requires satisfactory completion of 6,000 hours of work and industry related study. MIN. REQMTS: Age 16+ High school graduate or GED equivalent Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Masons Training Office 1188 Sand Island Parkway Honolulu, HI 96819 Phone: 848-0565 Fax: 847-7068 MISC. INFO: For more information see: http://www.bacweb.org/

For military veterans, also see: http://www.helmetstohardhats.org/

26

UNION FIRE SPRINKLER FITTER Fire sprinkler fitters install fire protection systems. Installations of these life safety systems vary in application and types of systems. Work is performed in residential, new construction of buildings or within existing structures. Most jobs require working at heights on ladders and/or lifts. Some work is also performed on underground fire mains inside excavated trenches. Fire Sprinkler Fitters install systems such as foam , carbon dioxide, halon, auxiliary, water mist suppression, wet pipe, dry pipe, and preaction/deluge. They measure, cut, thread, weld, braze, solder, glue and fabricate piping systems to be installed on job sites. Fire Sprinkler Fitters read and interpret drawings, specifications and fire codes to determine layout requirements for pipe in spaces and ceilings. Apprenticeship Program requires satisfactory completion of 10,000 hours of work experience in the trade 5 years, 10 semesters of related and hands-on instructions (108 hours per semester). MIN. REQMTS: Age 17+ High school diploma or GED School transcripts Pass placement evaluation with minimum score of 70% Driver’s license RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Plumbers/Pipefitters Training Office 720 Iwilei Road, Suite 222 Honolulu, HI 96817 Phone: 456-0585 Fax: 456-7131 MISC. INFO: For more information see: http://www.ua.org/ For military veterans, also see: http://www.helmetstohardhats.org/

12

UNION PLUMBER

Plumbers design, install, repair and maintain piping systems such as soil, waste, vent, potable water, grey water, reclaimed wastewater, gas systems (medical, propane and natural) in residential, commercial, industrial buildings and at utility sites. Plumbing tasks require the ability to assemble, install, maintain and repair pipes, fixtures, appurtenances and heating appliances, as well as sanitary and storm drainage systems. A plumber requires analytical and problem solving skills to make the correct decisions in the installation and repair of plumbing systems. The protection of public health, safety and welfare is a plumber’s primary responsibility. Apprenticeship Program requires satisfactory completion of 10,000 hours of work experience in compliance with the Uniform Plumbing Code (UPC) and 5 years, 10 semesters of related and hands-on instruction (108 hours per semester). Plumber’s state license required to complete the program. MIN. REQMTS: Age 17+ High school diploma or GED School Transcripts Pass placement evaluation with a minimum score of 70% Driver’s license RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Plumbers/Pipefitters Training Office 720 Iwilei Road, Suite 222 Honolulul, HI 96817 Phone: 456-0585 Fax: 456-7131 MISC. INFO: For more information see: http://www.ua.org/

For military veterans, also see: http://helmetstohardhats.org/

25

UNION FLOOR LAYER Floor layers install and replace resilient tile, linoleum, and vinyl sheets, and carpeting on floors. They inspect, clean, and smooth floors to be covered. Following verbal instructions or blueprints, they measure and mark off the floors. They spread adhesive cement on the floor and measure, cut, fit and set the material into place. Floor layers roll and smooth resilient flooring to ensure proper adhesion. They use knives, shears, hammers carpet stretchers, floor rollers and other tools. Apprenticeship Program requires satisfactory completion of 8,000 hours of on-the-job training and 480 hours of industry related study. MIN. REQMTS: Age 18+ Driver’s license Distinguish colors High school diploma or equivalent Physically able to perform duties RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Carpet, Linoleum & Soft Tile Layers Local 1926, D.C. 50 2240 Young Street Honolulu, HI 96826 Phone: 942-3988 Fax: 946-6667 MISC. INFO: Work involves ability to work on hands and knees. For more information see: http://www.iupat.org/ For military veterans, also see http://www.helmetstohardhats.org/

13

NON-UNION PLUMBER

Plumbers assemble, install, and repair plumbing systems and fixtures in homes, factories, and other buildings. They study building plans to determine the sequence of installations. They cut and thread pipes, assemble and install valves, pipes, and pipe fittings. They install and repair plumbing fixtures such as sinks, bath tubs, water heaters, toilets, and faucets; and test the systems for leaks. Plumbers use wrenches, drills, hydraulic pipe benders, acetylene torches, and welding and soldering equipment. Apprenticeship Program requires satisfactory completion of 10,000 hours of work and industry related study. MIN. REQMTS: Age 18+ Full-time employee of a member company for a period of not less than six continuous weeks Legally able to work Physically able to perform duties of the trade Pass physical examination if required by Committee RECRUITMENT: Sponsored by member employer CONTACT: Associated Builders & Contractors, Inc. 1375 Dillingham Blvd., #200 Honolulu, HI 96817 Phone: 845-4887 Fax: 847-7876 MISC. INFO: For more information see: http://abchawaii.org/, click on “Apprentice

Program”.

24

UNION GLAZIER Glaziers cut, fabricate, install glass and architectural aluminum in windows, doors for interior of commercial store fronts, glass curtain walls in high-rise offices and condominiums. They install custom automatic doors and skylights in buildings. They also cut and install mirrors for commercial and residential buildings. They install mirror wardrobe and shower doors and tub enclosure in homes. Glaziers use special power and hand tools as well as power equipment in the shop and on construction projects. During installation glaziers use wire clips, rubber gaskets, metal or wood moldings, putty and caulking. They also apply specialized caulking compounds to seal joints to stop water penetration and improve appearance of frames. Apprenticeship Program requires satisfactory completion of 10,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED Driver’s license Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Glaziers, Architectural Metal & Glass

Workers Apprentice and Training 2240 Young Street Honolulu, HI 96826 Phone: 942-3988 Fax: 946-6667 MISC. INFO: For more information see: http://www.iupat.org For military veterans, also see: http://www.helmetstohardhats.org/

14

UNION PLASTERER

Plasterers finish interior walls and ceilings with plaster coatings and exterior surfaces of buildings with cement plaster or stucco. They make ornamental designs in plaster. They mix the plaster to the desired consistency and spread it over the base with a trowel. They smooth the plaster with derbies and floats to obtain uniform thickness. Plasterers usually apply three coatings. They rough the undercoat so succeeding layers will bond more readily. They may use spray machines to apply plaster. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 16+ Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Masons Training Office 1188 Sand Island Parkway Honolulu, HI 96819 Phone: 848-0565 Fax: 847-7068 MISC. INFO: For more information see: http://www.opcmia.org/ For military veterans, also see: http://www.helmetstohardhats.org/

23

UNION HEAT AND FROST INSULATORS Heat & Frost Asbestos Insulators apply insulating material to equipment such as pipes, boilers, and furnaces, and to building surfaces to retain or exclude heat and to absorb sound. They use asbestos, cork, felt, fiberglass, and magnesia as insulating materials. They may paste, wire, tape, or spray insulation to the appropriate surface. On flat surfaces, they insert studs and attach wire mesh to form a base for the insulating material. They use trowels, brushes, scissors, stapling guns, power saws and compressors. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 18 + High school diploma or GED Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Heat & Frost Insulators & Allied

Workers, Local 132 1019 Lauia Street, Bay 4 Kapolei, HI 96707 Phone: 521-6405 Fax: 523-9861 MISC. INFO: For more information see: http://www.insulators.org/ For military veterans, also see: http://www.helmetstohardhats.org/

15

UNION PAINTER

Painters apply paint, varnish, stain and other finishes to interior and exterior surfaces of buildings and other structures for protection and decoration. They remove old paint with scrapers, wire brushes, and blowtorches, and smooth surfaces with sandpaper or steel wool. They fill holes and cracks with putty, and apply undercoating or primer before painting the finish coats. They use rollers, spray guns, and brushes to apply paint. Painters also erect scaffolding when working on tall structures. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED Driver’s license Physically able to perform duties of the trade Pass color-code vision test Pass entry level test of math and vocabulary CONTACT: Painters Union, Local 1791 2240 Young Street Honolulu, HI 96826 Phone: 947-6606 Fax: 942-0195 MISC. INFO: For more information see: http://www.dc50.org/ and http://www.iupat.org/ For military veterans, also see: http://www.helmetstohardhats.org/

22

UNION IRONWORKER (FABRICATOR)

Fabricating ironworkers make and assemble structural metal products for buildings and bridges and framework for machinery, ovens, tanks, stairways, stacks, and ornamental railings. Following job orders or blueprints, they layout and plan the sequence of operations. They operate metal fabricating machines such as shears, punch presses, drills, treading machines, and rolls to cut, bend, and shape metal. They align, fit, tack, and weld metal parts together. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 18+ High school diploma or GED Physically able to perform duties of the trade Must be sponsored by employer who is signatory to the Shopmen’s Local 803 collective bargaining agreement RECRUITMENT: Sponsored by member company CONTACT: Ironworkers Union, Local 803 94-497 Ukee Street Waipahu, HI 96797 Phone: 671-4344 Fax: 676-1144 MISC. INFO: For more information see: http://www.ironworkers.org/ For military veterans, also see: http://www.helmetstohardhats.org/

16

21

NON-UNION PAINTER

Painters apply paint, varnish, stain and other finishes to interior and exterior surfaces of buildings and other structures for protection and decoration. They remove old paint with scrapers, wire brushes, power tools and sandblasters, and smooth surfaces with sandpaper or steel wool. They fill holes and cracks with putty, and apply undercoating or primer before painting the finish coats. They use rollers, spray guns, and brushes to apply paint. Painters also erect scaffolding when working on tall structures. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 16+ Physically fit to perform duties of the trade Must not be color blind CONTACT: Color Dynamics, Inc. 816 Gulick Avenue Honolulu, HI 96819 Phone: 848-7000 Fax: 842-0800 Kawika’s Painting 2147 Eluwene Street Honolulu, HI 96819 Phone: 848-0003 Fax: 842-1908

21

UNION IRONWORKER (REINFORCING) Reinforcing Ironworkers position and secure steel rods or bars in concrete forms for reinforcement in bridges, buildings, and other structures. Following blueprints or other instructions, they determine the number, sizes, shapes, and locations of the reinforcing rods. They use steel pliers and other tying tools to secure the rods. They cut and bend the rods to required lengths with hacksaws, bar cutters, acetylene torches, and bending machines. They also reinforce concrete surfaces with coarse wire mesh. Apprenticeship Program requires satisfactory completion of 6,000 hours of work and industry related study. MIN. REQMTS: Age 16+ Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Ironworkers Union, Local 625 94-497 Ukee Street Waipahu, HI 96797 Phone: 671-8225 Fax: 676-1144

MISC. INFO: For more information see: http://www.ironworkers.org/ For military veterans, also see: http://www.helmetstohardhats.org/

17

NON-UNION PAINTER

Painters apply paint, varnish, stain and other finishes to interior and exterior surfaces of buildings and other structures for protection and decoration. They remove old paint with scrapers, wire brushes, and blowtorches; and smooth surfaces with sandpaper or steel wool. They fill holes and cracks with putty, and apply undercoating or primer before painting the finish coats. They use rollers, spray guns, and brushes to apply paint. Painters also erect scaffolding when working on tall structures. Apprenticeship Program requires satisfactory completion of 8,000 hours of work and industry related study. MIN. REQMTS: Age 18+ Full-time employee of a member company for a period of not less than six continuous weeks Legally able to work Physically able to perform duties of the trade Pass physical examination if required by Committee RECRUITMENT: Sponsored by member organization CONTACT: Associated Builders & Contractors, Inc. 1375 Dillingham Blvd., #200 Honolulu, HI 96817 Phone: 845-4887 Fax: 847-7876 MISC. INFO: For more information see: http://abchawaii.org/, click on “Apprentice

Program”.

20

UNION IRONWORKER (STRUCTURAL) Structural ironworkers erect steel frameworks for buildings, bridges, floor decking, and other structures. They guide, place, and join girders, columns, and other structural members. They verify alignment of the members, and bolt, rivet, or weld them for final fastening. They use winches, hoists, and jacks to position members and air hammers and welding equipment to join members. Apprenticeship Program requires satisfactory completion of 6,000 hours of work and industry related study. MIN. REQMTS: Age 16+ Physically able to perform duties of the trade RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Ironworkers Union, Local 625 94-497 Ukee Street Waipahu, HI 96797 Phone: 671-8225 Fax: 676-1144 MISC. INFO: For more information see: http://www.ironworkers.org/ For military veterans, also see: http://www.helmetstohardhats.org/

18

UNION OPERATING ENGINEER Construction Equipment Operators (CEO) run a variety of construction equipment to excavate and grade earth; erect structural and reinforcing steel; pour concrete; and control air and water output. They operate bulldozers, cranes, excavators, paving machines, loaders, tractors, compressors, and other construction machinery. They may lubricate their machines and may make minor repairs and adjustments. Because the skills and training vary, operating engineers are usually classified by the type or the capacity of the machines they operate. Heavy Duty Repairers and Welders (HDR) are trouble shooters who keep the construction equipment in constant operation. While in the shop, they do minor and major repairs on the equipment. Apprenticeship Program requires satisfactory completion of industry related study and: Construction Equipment Operator - 6,000 hrs. of work Heavy Duty Repairer & Welder - 8,000 hrs. of work Truck Operator & Driver -2,000 hrs. of work Paving Equipment Operator - 4,000 hrs. of work MIN. REQMTS: Age18+ High School diploma or GED or C-based test Physically able to perform duties of the trade School Transcripts Driver’s License Current State DOT PUC physical Ranked on general knowledge and hands-on test Have reliable transportation RECRUITMENT: By Joint Apprenticeship Committee Watch for announcements CONTACT: Operating Engineers, Local Union 3 Kahuku Training Facility P.O. Box 428 Kahuku, HI 96731-0428 Phone: 232-2001 Fax: 232-2217 MISC. INFO: For more information see: http://oe3.org//training/ For military veterans, also see http://helmetstohardhats.org/

19