State of California Business, Transportation, and Housing Agency...
Transcript of State of California Business, Transportation, and Housing Agency...
State of California Business, Transportation, and Housing Agency
Department of Transportation Construction Program
Labor Surcharge & Equipment Rental Rates (Cost of Equipment Ownership)
Effective April 1, 2001 Through March 31, 2002
Class Code Description First Page of Class
LABOR SURCHARGE............................................................................... A OVERTIME AND MULTIPLE SHIFTS.................................................................. C RIGHT OF WAY DELAY............................................................................ D DAILY EXTRA WORK BILL......................................................................... D ATTACHMENTS.................................................................................... 1
[AIRCP] AIR COMPRESSORS ............................................................................... 1 [AIRDL] AIR DRILLS, CRAWLER........................................................................... 1 [AIRTO] AIR TOOLS...................................................................................... 1 [ASDSP] ASPHALT DIKE & SHOULDER PAVERS................................................................ 2 [ASPAV] ASPHALT PAVERS ................................................................................ 2 [ASPWP] ASPHALT WINDROW/PICKUP MACHINES............................................................... 3 [AUGCL] AUGERS, CRAWLER MOUNTED ...................................................................... 3 [AUGHZ] AUGERS, HORIZONTAL............................................................................ 3 [AUGTK] AUGERS, TRUCK MOUNTED......................................................................... 3 [BITDT] BITUMINOUS DISTRIBUTORS....................................................................... 4 [BRMSW] BROOMS & SWEEPING EQUIPMENT................................................................... 4 [BRUCP] BRUSH CHIPPING & SHREDDING MACHINES........................................................... 4 [COMHG] COMPACTORS, HAND GUIDED....................................................................... 4 [CONMX] CONCRETE MIXERS ............................................................................... 4 [CONPM] CONCRETE PUMPS ................................................................................ 5 [CONSF] CONCRETE SLIPFORM PAVERS ..................................................................... 5 [CONVB] CONCRETE VIBRATORS............................................................................ 5 [CRBEX] CURB EXTRUSION MACHINES....................................................................... 5 [CRBSF] CONCRETE BARRIER SLIPFORM PAVERS.............................................................. 5 [ELGEN] ELECTRIC GENERATORS & LIGHT PLANTS............................................................ 6 [ELTOL] ELECTRIC POWERED HAND TOOLS................................................................... 6 [FKLFT] FORK LIFT TRUCKS .............................................................................. 6 [GRADR] GRADERS........................................................................................ 6 [HAMMR] HAMMERS, DEMOLITION & PILE.................................................................... 7 [HCECL] HYDRAULIC CRANES & EXCAVATORS, CRAWLER MOUNTED............................................... 8 [HCESP] HYDRAULIC CRANES & EXCAVATORS, SELF PROPELLED................................................ 11 [HCETD] HYDRAULIC CRANES & EXCAVATORS, TRUCK MTD. W/CARRIER.......................................... 13 [HCETG] HYDRAULIC CRANES & EXCAVATOR TRUCK MTG LESS CARRIER.......................................... 14 [HYLFT] HYDRAULIC PERSONNEL LIFTS & AERIAL WORK PLATFORMS............................................ 15 [LDRCL] LOADERS, CRAWLER .............................................................................. 15 [LDRRT] LOADERS, RUBBER TIRE.......................................................................... 16 [LEADS] LEADS, PILE DRIVING........................................................................... 19 [NONOP] NON OPERATED EQUIPMENT (DAILY RATES).......................................................... 19 [PGDIA] PAVEMENT GRINDERS, DIAMOND BLADES............................................................. 20 [PGT-C] PAVEMENT GRINDERS, TUNGSTEN-CARBIDE BITS ..................................................... 20 [PUMWA] PUMPS, WATER................................................................................... 21 [ROL-2] ROLLERS, TANDEM STEEL WHEELS.................................................................. 21 [ROLRT] ROLLERS, RUBBER TIRE, SELF PROPELLED.......................................................... 22 [ROTAM] ROLLER-TAMPING, SEGMENTED, SHEEPSFOOT, SELF PROPELLED........................................ 22 [ROTAT] ROLLERS-TAMPING, SEGMENTED, SHEEPSFOOT TOWED................................................. 23 [ROVIB] ROLLERS, VIBRATORY, SELF PROPELLED............................................................ 23 [S&CCL] SHOVELS & CRANES, CRAWLER..................................................................... 26 [S&CTK] SHOVELS & CRANES, TRUCK MOUNTED............................................................... 26 [SANBL] SANDBLASTING EQUIPMENT........................................................................ 26 [SAWCH] SAWS, CHAIN AND EARTH AUGER ATTACHMENT ....................................................... 26 [SAWCO] SAWS, CONCRETE AND MASONRY.................................................................... 27 [SCRSP] SCRAPERS, SELF PROPELLED...................................................................... 27 [TRACC] TRACTORS, CRAWLER ............................................................................. 28 [TRACH] TRACTORS, HEAVY ............................................................................... 29 [TRACS] TRACTORS, RUBBER TIRE, INDUSTRIAL, FARM & SKID STEER......................................... 29 [TRAFA] TRAFFIC CONTROL & SAFETY DEVICES (HOURLY RATES).............................................. 30 [TRAFC] TRAFFIC CONTROL & SAFETY DEVICES (DAILY RATES)............................................... 30 [TRAIL] TRAILERS, EQUIPMENT, LOW BED.................................................................. 30 [TRAIT] TRAILERS, EQUIPMENT, TILT BED................................................................. 30 [TRENC] TRENCHING MACHINES............................................................................ 31 [TRUCK] TRUCK, TRUCK TRAILERS, EXCL DUMP TRUCKS & EQPT TRAIL......................................... 32 [TRUOF] TRUCKS, OFF HIGHWAY........................................................................... 32 [TRUON] TRUCKS, DUMP, ON-HIGHWAY...................................................................... 32 [WELD] WELD EQUIPMENT ................................................................................ 32
USER'S GUIDE FOR LABOR SURCHARGE AND EQUIPMENT RENTAL RATES
April 1, 2001 - March 31, 2002
Equipment Rental Rates are available on the Internet at:
http://www.dot.ca.gov/hq/construc/
For additional copies of the "Labor Surcharge and Equipment Rental Rates", send $9.00 per book (tax included) to:
CALTRANS PUBLICATIONS 1900 ROYAL OAKS DRIVE
SACRAMENTO, CALIFORNIA 95815
or by VISA or MASTERCARD by telephone at (916) 323-5606
Changes
Changes to the equipment rates in the April 1, 2001 book were the result of: 1) fuel costs increased; 2) interest rates increased; 3) Producers' Price Index increased; 4) sales tax decreased; and 5) no change in freight (F.O.B.) rates. Additionally, low-usage equipment was deleted and newer equipment models were added. Backhoe (BH) attachment was deleted.
Labor Surcharge
The labor surcharge compensates the contractor for statutory payroll items stipulated by various governmental agencies. The six items included are Workers' Compensation, Social Security, Medicare, Federal Unemployment, State Unemployment, and State Training taxes. The general rate is an average of the job classifications common to Caltrans projects. Changes to the labor surcharge in the April 1, 2001 book were the result of an increase in Worker's Compensation rates. The rates were derived from using the pure premium rate approved by the Insurance Commissioner effective January 1, 2001 and increasing it by the historical statewide average expense. In the calculation of the labor surcharge for overtime work, the Worker's Compensation is not included on the premium portion of overtime, as provided by Worker's Compensation regulations.
The surcharge percentage to be applied to the actual wages paid as provided in Section 9-1.03A(1b) of the Standard Specifications will be 17 percent for regular time (RT) and 15 percent for overtime (OT) .
Exceptions to the general rate are listed below. The classifications were chosen because of very high Workers' Compensation Insurance costs. Contractors will be compensated at their employees worker’s compensation rating, regardless of work being performed (e.g. “Drilling Contractor” performing traffic control will be compensated at the Drilling Surcharge rate). Questions or disputes should be directed to the Resident Engineer.
A
EXCEPTIONS
Type of Work Performed Labor Surcharge Percent
RT OT
Concrete Construction - Bridge ......................................................................... 20 17
Drilling ............................................................................................................... 24 21
Fence & Guardrail Construction ........................................................................ 21 18
Erection of structural metal for metal bridges, excluding sign bridge ................ 23 20
Landscape Gardener ........................................................................................ 18 16
Mobil Crane & Hoist Service ............................................................................. 22 18
Painting Steel Structures or Bridges ................................................................. 24 21
Pile Driving, not including drilled, cast-in-place concrete piles .......................... 21 18
Sign Erection or Repair .................................................................................... 29 24
Wrecking & Demolition ...................................................................................... 19 17
For work that is determined by the Engineer to be covered by Longshoreman and Harbor Worker’s Act, an appropriate labor surcharge will be established by the Engineer.
B
Background
By the authority described in Standard Specifications Section 9-1.03A, compensation for extra work is determined to be the total of the direct equipment costs (rental rate) plus a 15 percent markup for all overhead not included as direct costs. The direct costs include fuel, oil, lubrication, supplies, small tools, necessary attachments, repairs and maintenance, depreciation, storage, cost of facilities capital, overhaul and all incidentals. The labor costs required to provide the above listed items are also included. The operator cost is not included in the equipment rate.
The calculated rate represents the cost of owning and operating the equipment, which is likely to be lower than the rate charged by a rental yard. The rental yard rate may include additional overhead and profit as well as a premium for short-term rentals. In certain situations, factors are applied to the calculated rates to provide ownership-only rates for delay situations or operating-only rates for overtime situations. The rates are calculated using factors for the direct cost items described above. The factors represent an average and are applied to all makes and models of equipment within the class. All rates are hourly, unless stated otherwise.
Overtime and Multiple Shifts
Certain equipment costs are fixed on an annual basis, no matter how many hours are worked. Once an estimate of the costs and hours of use is made, a rate can be determined. When more than the estimated number of hours are worked (Overtime or Multiple Shift), a duplication of payment occurs on the fixed cost portion of the equipment rate. In order to avoid this duplication, Caltrans uses a reduced rate for the Overtime or Multiple Shift situations. The definition of the Overtime or Multiple Shift periods will be:
Overtime hours occur after the equipment has worked at force account, eight hours per day (or after the daily equivalent of forty hours per week for special work schedules - 4/10 or 9/80). Multiple shift hours will be paid at the same rate as overtime hours.
The hours shown on the Daily Extra Work Bill will determine when the Overtime and Multiple Shift is to be used. When the hours worked on force account are eight or less, straight time rates will be used. When the hours worked on force account are more than eight, Overtime and Multiple Shifts rates will be used. Saturday, Sunday or holiday work will be paid at the overtime rate except in those cases where these days are considered working days in the special provisions.
Be advised the computed overtime rates are no longer rounded and now equal the product of the straight time rate and overtime factor. The Overtime and Multiple Shift Factors are recalculated annually to reflect changes in the operating costs.
C
Right of Way Delay
As described in Section 8-1.09 of the Standard Specifications, the Right of Way Delay Factor applied to the equipment rental rate will be the basis for compensation for idle equipment time on Right of Way Delays. The factor has been calculated to include the ownership costs without including operating costs. The Right of Way Delay Factor recovers all the contractor's non-operating costs in an eight hour day. Payment for equipment on Right of Way Delay is limited to eight hours per day or forty hours per week maximum.
The NONOP class for non-operated items and the TRAFC class for traffic safety devices have been separated from traditional "rolling stock" equipment when calculating the Delay Factor. These classes are comprised of items whose depreciable lives are related to the number of uses per year, rather than the number of hours per year. Accordingly, the reasonable compensation for the Contractor's actual loss has been estimated to equal the cost of facilities capital. It should be recognized that these items must be out of service before the Delay Factor is applied. For example, if work behind K-rail is delayed, the K-rail should be paid straight time until it is no longer controlling traffic.
Any use of this factor must have the prior approval of the Resident Engineer. The Right of Way Delay Factor is recalculated annually to reflect changes in the operating costs.
Use of Daily Extra Work Bill
Identification codes and rates are intended to be used with the Caltrans Daily Extra Work Bill (CEM-4902 Series). The class is abbreviated using a 5 digit alpha-code, the make (manufacturer), a 4 digit alpha-code, and the code a 7 digit alpha-numeric code. All three codes must be used to define the equipment when using the automated pay system. Since the majority of items are described by per hour rates, each line has an entry for hours with an allowable maximum of 24. Special items with other than hourly rates should be appropriately checked and then entered in the Regular Hours column. For example, 50 Traffic Cones used 3 days (converts to 1.5, 100-cone-days) requires 1.5 be entered in the Regular Hours column. Note that any entry in the Delay Factor column will automatically apply the Delay Factor to every equipment entry on the current report.
Whenever an identification code cannot be found or the rate for a particular date of work performed is not available, updated information should be requested from the Resident Engineer. It is the Resident Engineer's responsibility to establish rates for equipment not found in the Labor Surcharge and Equipment Rental Rates publication. Support for this determination is available from both District and Headquarters Construction Offices. Rates are regularly superseded during contract periods, so use of old publications or expired rates should be avoided.
The equipment is presented with a standard configuration capable of performing work commonly encountered on Caltrans projects. Special attachments or accessories are described under the classification heading in the Labor Surcharge and Equipment Rental Rate book. Attachments other than those described by these remarks will be paid only upon direction of the Resident Engineer.
D
EQUIPMENT RENTAL RATES
NOTE--THE FOLLOWING RATES ARE IN EFFECT FROM APRIL 1, 2001 THROUGH MARCH 31, 2002
ATTACHMENTS
TRACTOR ATTACHMENTS -including power control units and accessories necessary to provide a functional attachment. Dozer blades are included in the standard configuration for both crawler and heavy, rubber tire tractors. Rippers are listed from R1 to R8 and Winches for logging or towing are listed from S1 to S5. Equipment model groups are as follows:
1. Case 300 Thru 800 Series, Cat D-2 thru D-4, Deere 400 & 450, Dresser TD-7, TD-8 and TD-9, Fiat-Allis FD-5 Thru FD-7, Komatsu D21E Thru D37P, Liebherr PR711 & PR721.
2. Case 1150, Cat D-5, Deere 750, Dresser TD-12, Fiat-Allis FD9 & 10, Komatsu D58P, Liebherr PR731.
3. Case 1450 and 1550, Cat D-6, Deere 850, Dresser TD-15, Komatsu D63PE Thru D68P, Liebherr PR741.
4. Cat D-7 & 814, Dresser TD-20, Fiat-Allis 14 & FD14, Komatsu D83P, Terex 82-30
5. Cat D-8 & 824, Dresser TD-25, Fiat-Allis FD20 Komatsu D135A, Terex 82-40 Michigan 280, Raygo CHD 17 & CD-500.
6. Cat D-9 & 834, Fiat-Allis FD30, Raygo CHD 24 & CD 800.
7. Cat D-10, Dresser TD-40, Fiat-Allis FD40, Komatsu 375, Michigan 380, Raygo CDH 30.
8. Cat D-11, Fiat-Allis FD50, Komatsu 475
Model Code Rate
Clam action bucket <$20/hr CB $2.27 Clam action bucket <$40/hr CB $3.57 Clam action bucket >$40/hr CB $6.11 Ripper on No. 1 models R1 $1.88 Ripper on No. 2 models R2 $2.47 Ripper on No. 3 models R3 $4.11 Ripper on No. 4 models R4 $4.67 Ripper on No. 5 models R5 $7.66 Ripper on No. 6 models R6 $12.10 Ripper on No. 7 models R7 $14.30 Ripper on No. 8 models R8 $23.30 Winch on No. 1 models S1 $2.23 Winch on No. 2 models S2 $3.32 Winch on No. 3 models S3 $4.40 Winch on No. 4 models S4 $5.65 Winch on No. 5 models S5 $9.88 Lift gate TG $0.92 Pump, water truck only TP $4.44 Winch, truck TW $0.24 Gas welding hose per 15.2 m (50 lf) WH $0.01 Elec welding lead per 30.5 m (100 lf) WL $0.14
AIR COMPRESSORS [ AIRCP ]
DELAY FACTOR = 0.23 OVERTIME FACTOR = 0.78 All types of self contained units, regardless of power(gas, diesel and lpg) or type of compression(reciprocating, screw and vane). The listed rates include 15.2 meters (50 lineal feet) of hose, all hose whips, fittings, couplings and any compressor attachments. Listed in accordance with Mfr's rated capacity in liters per second (cubic feet per minute) at 7 bar (100 psi).
PORTABLE [ PORT ]
OVER TO Code Rate
0 19 (40) 000-004 $2.14 19 (40) 76 (160) 004-016 $7.80 76 (160) 118 (250) 016-025 $9.17 118 (250) 212 (450) 025-045 $16.93 212 (450) 354 (750) 045-075 $26.92 354 (750) 566 (1200) 075-120 $41.20 566 (1200) 708 (1500) 120-150 $51.56
AIR DRILLS, CRAWLER [ AIRDL ]
DELAY FACTOR = 0.53 OVERTIME FACTOR = 0.50 All types, pneumatically propelled, including attachments. Expendable carbon drill steel, bits and shanks shall be paid by separate invoice. Rated in accordance with the cylinder bore diameter in millimeters(inches).
CRAWLER DRILLS
OVER TO
[ CLR
Code
]
Rate
0 100 (4)
100 (4) & Over
0-4 5
$20.33 $26.05
AIR TOOLS [ AIRTO ]
DELAY FACTOR = 0.63 OVERTIME FACTOR = 0.39 All types including paving breakers, clayspades and diggers, sinker rock drills, trench diggers, sheeting/spike drivers, backfill tampers and hand held grinding tools. Expendable drill steel, bits and breakers points, grinding wheels and shanks shall be paid by separate invoice. Rated by tool weight in kilograms (pounds), determined in accordance with the Mfr's specifications.
AIR TOOLS [ ATOL ]
OVER TO Code Rate
0 4.5 (10) 0-10 $0.31 4.5 (10) 9.1 (20) 10-20 $0.34 9.1 (20) 13.6 (30) 20-30 $0.72 13.6 (30) 18.1 (40) 30-40 $0.85 18.1 (40) 27.2 (60) 40-60 $0.81 27.2 (60) & Over 60 $1.11
1
ASPHALT DIKE & SHOULDER PAVERS [ ASDSP ]
DELAY FACTOR = 0.22 OVERTIME FACTOR = 0.82 Includes all attachments, accessories and automatic grade and line control.
A.C. DIKE COMPANY
Model
No. 1 No. 2 Nos. 43, 44
ASPHALT PAVING COMPANY
Model
E-1 E-2, E3
BLAW-KNOX
Model
RW-35 / 38 RW-85 RW-95 RW-100 RW-195D
DELTA
Model
DC-1
[ ACDC ]
Code
4050 4052 4054
[ APCO ]
Code
4000 4002
[ B-K ]
Code
4075 4077 4079 4081 4083
[ DLTA ]
Code
4095
Rate
$34.39 $39.90 $64.84
Rate
$62.85 $110.54
Rate
$47.71 $17.16 $27.69 $63.57 $84.54
Rate
$95.67
ASPHALT PAVERS [ ASPAV ]
DELAY FACTOR = 0.28 OVERTIME FACTOR = 0.77 Includes all attachments, accessories and automatic grade and line control.
BARBER-GREENE [ B-G ]
Model Code Rate
BG 220 0805 $65.73 BG 225 0810 $73.69 BG 240 0815 $75.91 BG 245 0820 $86.36 BG 260 0825 $90.88 BG 260B 0826 $137.27 BG 265 0830 $109.47 RT 435, 4wd 0905 $81.08 RT 445, 4wd 0925 $83.88 RT 455, 4wd 0945 $81.76 RT 455, 4wd, 10-20' screed 0955 $85.79 RT 465, 4wd 0965 $101.22 SA 125 1419E $61.49 SB 131 1420 $76.73 SB 140 1425 $90.31 SA 141 1430 $59.52 SA 145 1432 $84.15 SA 150 1435 $102.66
2
SB 170
BLAW-KNOX
Model
PF-22 PF-35 PF-115 PF-120H PF-171 PF-180 PF-180H PF-200 PF-200, 18' screed PF-220 PF-400A PF-500 PF-500, 18' screed PF-3200 PF-5510
CATERPILLAR
Model
AP-200 AP-800 AP-1050 AP-1000 AP-1000 4wd AP-1055B AP-1200
CEDAR RAPIDS
Model
BSF-2H BSF-3R CR-351 CR-351 4wd CR-431 CR-551 CR-461 CR-561
LAYTON
Model
F-525 D-550 H-500B
1440
[ B-K ]
Code
1490 1550 1750 2010 2090 2100 2204 2250 2252 2300 2350 2404 2406 2410 2415
[ CAT ]
Code
2420 2430 2431 2435 2436 2438 2440
[ CEDR ]
Code
2550 2600
2668A 2668B 2669 2670 2672 2674
[ LYTN ]
Code
2680 2682 2684
$96.78
Rate
$28.24 $48.44 $93.12 $77.85
$113.70 $39.02
$128.19 $124.93 $128.03 $122.65 $112.18 $134.36 $137.69 $148.53 $158.33
Rate
$25.40 $82.59
$132.10 $124.51 $130.90 $155.34
$99.93
Rate
$60.35 $60.75 $96.28
$100.56 $90.13
$142.27 $140.07 $152.46
Rate
$13.69 $17.15 $6.24
ASPHALT WINDROW/PICKUP MACHINES [ ASPWP ] AUGERS, HORIZONTAL [ AUGHZ ]
DELAY FACTOR = 0.17 OVERTIME FACTOR = 0.86
AUGERS, CRAWLER MOUNTED [ AUGCL ]
DELAY FACTOR = 0.43 OVERTIME FACTOR = 0.60 Includes carrier, attachments and accessories with up to 6.1 meters(20 feet) of auger flights. Consumable bits or tips to be paid by separate invoice.
BAYSHORE
Model
[ BYSH
Code
]
Rate
8400 TD limited access
TEXOMA
Model
[
1500
TXMA
Code
]
$85.38
Rate
TAURUS 700CL
WATSON
Model
[
2010 2100
WATS
Code
]
$185.26 $109.96
Rate
2000CM 2500CM 3000CM 3100CM
2500 2505 2510 2515
$79.31 $123.15 $139.62 $147.45
DELAY FACTOR = 0.40 OVERTIME FACTOR = 0.63 Includes all attachments and accessories with up to 9.1 meters(30 feet) of auger flight, track and/or pipe pusher. Consumable bits or tips shall be paid by separate invoice. Power unit is included.
AKKERMAN [ AKMN ]
Model Code Rate
360 5000 $97.07 420 series 1250 5002 $100.19
AMERICAN AUGER [ AMAU ]
Model Code Rate
36-350 5014 $20.70
BORZALL [ BORZ ]
Model Code Rate
2300-10 5040 $5.57 4265-10 5042 $7.56
DITCH WITCH [ D-W ]
Model Code Rate
2510 5040 $36.73
AUGERS, TRUCK MOUNTED [ AUGTK ]
DELAY FACTOR = 0.33 OVERTIME FACTOR = 0.70 Includes truck/carrier, all attachments and accessories with up to 6.1 meters(20 feet) of auger flight. Consumable bits or tips shall be paid by separate invoice.
CALWELD [ CALW ]
Model Code Rate
150-A 200 4500LH
5050 5052 5054
$53.94 $74.67
$120.49
HUGHES [ HUGH ]
Model Code Rate
EZ 112 EZ 120 LDH-100 LDH-80 LLDH-120 LLDH-80
5070 5071 5072 5074 5076 5078
$50.46 $56.85
$133.54 $169.04 $174.84 $167.95
P.D.E. [ PDE ]
Model Code Rate
M -100 M-400 with hammer
5084 5085
$19.07 $25.12
3
Includes all attachments and accessories.
ATHEY
Model
7-11
BARBER-GREENE
Model
BG-610H
CATERPILLAR
Model
WE-601B
CLARK'S WELDING COMPANY
Model 500 601 Lincoln 660
C.M.I.
Model
851
[ ATHY ]
Code Rate
5000 $43.13
[ B-G ]
Code Rate
5100 $39.56
[ CAT ]
Code Rate
5200 $38.34
[ CLAR ]
Code 5300 5304 5305
Rate $28.69 $20.74 $41.07
[ CMI ]
Code Rate
5405 $47.87
TEXOMA
Model
Economatic 115 Super Economatic 80 270 330 330 with hammer 500 with hammer 600 700
WATSON
Model
1000 2000 3000
[ TXMA ]
Code
5087 5089 5090 5093 5095
5095B 5096B 5097 5099
[ WATS ]
Code
6010 6012 6014
Rate
$56.05 $51.64
$110.66 $42.03 $60.58 $68.45 $70.45 $79.36
$133.75
Rate
$37.32 $96.15
$153.18
BITUMINOUS DISTRIBUTORS [ BITDT ]
DELAY FACTOR = 0.21 OVERTIME FACTOR = 0.81 Includes all equipment for handling bituminous materials under pressure. Includes pumps, spray bars and other attachments and accessories.
TRAILER MOUNTED [ TLMD ] Does not include towing unit. Capacity rated in liters (U.S. gallons).
OVER TO Code Rate 0 1136 (300) 0-300 $3.20
TRUCK MOUNTED [ TRMD ] Including truck. Capacity rated in liters (U.S. gallons).
OVER TO Code Rate 0 3028 (800) 00-08 $31.03 3028 (800) 5299 (1400) 08-14 $36.64 5299 (1400) 6831 (1800) 14-18 $38.70 6831 (1800) 11355 (3000) 18-30 $39.90 11355 (3000) 15140 (4000) 30-40 $42.76
BROOMS & SWEEPING EQUIPMENT [ BRMSW ]
DELAY FACTOR = 0.27 OVERTIME FACTOR = 0.75 Includes all attachments and accessories with brooms of any type. Includes broom wear.
BROOMS - MOUNTED & [ MTTD ] TOWED Includes traction, PTO or engine driven.
Model Code Rate ALL ALL $12.48
BROOMS - SELF PROPELLED [ SFPR ]
Model Code Rate
ALL ALL $16.68
SWEEPERS - SELF [ SWSP ] PROPELLED, PICK UP Rated in accordance with hopper size in cubic meters (cubic yards).
OVER TO Code Rate 0 2.3 (3.0) 0-3 $42.83 2.3 (3.0) 4.6 (6.0) 3-6 $61.01 4.6 (6.0) 6.9 (9.0) 6-9 $65.36
BRUSH CHIPPING & SHREDDING [ BRUCP ] MACHINES
DELAY FACTOR = 0.12 OVERTIME FACTOR = 0.89 Includes all attachments, accessories and power unit. Rated in accordance with the cutter head width in millimeters(inches)
BRUSH CHIP & SHRED
OVER TO
[ BCSM
Code
]
Rate
0 230 (9) 300 (12)
230 (9) 300 (12) 405 (16)
00-09 09-12 12-16
$18.14 $18.13 $21.24
COMPACTORS, HAND GUIDED [ COMHG]
DELAY FACTOR = 0.31 OVERTIME FACTOR = 0.71 Includes pan, vibrating plate, rammer and jumping jack type compactors(gas or diesel). Includes all attachments and accessories. Listed in accordance with the weight in kilograms(pounds)
COMPACTORS
OVER TO
[ COMP
Code
]
Rate
0 113 (250)
113 (250) & Higher
0-250 250
$1.76 $5.04
CONCRETE MIXERS [ CONMX ]
DELAY FACTOR = 0.23 OVERTIME FACTOR = 0.79
STATIONARY OR PORTABLE [ SORP ] Rated by Mfr's capacity in cubic meters (sacks or cubic feet).
OVER TO Code Rate 0 0.10 (3.5) 0-3.5 $0.42 0.10 (3.5) 0.17 (6.0) 03.5-6 $1.34 0.17 (6.0) 0.31 (11) 06-11 $1.78 0.31 (11) 0.45 (16) 11-16 $2.32
TRANSIT MIX [ TRMX ] PTO type, including carrier. Rated by Mfr's capacity in cubic meters (cubic yards).
OVER TO Code Rate 6.4 (9) 7.6 (10) 09-10 $64.35 7.6 (10) 9.2 (12) 10-12 $66.38
4
CONCRETE PUMPS [ CONPM ] CONCRETE VIBRATORS [ CONVB ]
DELAY FACTOR = 0.30 OVERTIME FACTOR = 0.73 Includes truck/carrier or self powered trailer mounted units. Including attachments, accessories and hoses.
ELBA [ ELBA ]
Model Code Rate
K-8020 1000 $55.86
MAYCO MACO[ ]
Model Code Rate
C-30HD 1020 $9.34 LST-30/60S 1024 $16.73
SCHWING SHWG[ ]
Model Code Rate
BPA-1000 1050 $24.78 WP-1000X 1052 $29.72 900-1200 w/28 m boom 1055 $73.43 900-1200 w/32 m boom 1057 $78.08 BPL 1200 w/36 m boom 1058 $84.10
THOMSEN THOM[ ]
Model Code Rate
A-3.75 w/ mixer 1070 $12.63 A-7 1072 $9.71 11 pump w/28 m boom 1078 $84.23 12 pump w/32 m boom 1082 $92.12 14 pump w/36 m boom 1084 $139.33
CONCRETE SLIPFORM PAVERS [ CONSF ]
DELAY FACTOR = 0.31 OVERTIME FACTOR = 0.73 Includes all attachments and accessories. Detached, independently powered finished bridges or spray/tyne machines are not included.
C.M.I.
Model
[ CMI
Code
]
Rate
SF-250 SF-350 series 2 SF-550
2002 2004 2006
$118.05 $211.00 $264.48
GOMACO
Model
[ GOMA
Code
]
Rate
GP-2000 GP-2500 GP-3500
2020 2022 2024
$104.18 $126.96 $189.71
DELAY FACTOR = 0.43 OVERTIME FACTOR = 0.59 Includes all attachments and accessories. Includes vibrator motor but independent power, whether air or electric, shall be paid as a separate item.
CONCRETE VIBRATORS [ CVIB ]
Model Code Rate
Each Vibrating Head EVHD $0.62
CURB EXTRUSION MACHINES [ CRBEX ]
DELAY FACTOR = 0.33 OVERTIME FACTOR = 0.71 Self propelled for asphalt or concrete curb and gutter section. Includes attachments, accessories and molds. Rated by Mfr's maximum width recommendations in millimeters (inches).
CURB EXTRUSION MACHINE
OVER TO
[ CEM
Code
]
Rate
0 460 (18)
460 (18) & Over
0-18 18 PLUS
$42.18 $52.07
CONCRETE BARRIER SLIPFORM PAVERS [ CRBSF ]
DELAY FACTOR = 0.32 OVERTIME FACTOR = 0.73 Includes all attachments, accessories and barrier or curb molds.
C.M.I.
Model
SF-175
CURBMASTER
Model
CMT-800
GOMACO
Model
GT-6000-(78&90) COMMANDER II COMMANDER III
MILLER FORMLESS
Model
M-7500 M-8100 M-8800
[ CMI ]
Code
3000
[ CURB ]
Code
3020
[ GOMA ]
Code
3040 3045 3050
[ MILL ]
Code
3063 3065 3067
Rate
$90.47
Rate
$60.16
Rate
$58.11 $70.17 $94.33
Rate
$75.42 $97.44
$137.02
5
PLANTS
DELAY FACTOR = 0.20 OVERTIME FACTOR = 0.81
13608 (30000) 18144 (40000) 300-400 $54.63 18144 (40000) 22680 (50000) 400-500 $69.18ELECTRIC GENERATORS & LIGHT [ ELGEN ] 22680 (50000) 34020 (75000) 500-750 $89.93
GRADERS [ GRADR ]Rates are for gas or diesel power and alternating or direct current.
GENERATOR [ GEN ] Rated in accordance with Mfr's output in kilowatts.
OVER TO 0 1 1 3 3 7.5 7.5 15 15 25 25 50 50 100 100 200 200 300 300 400 400 500
LIGHTS Includes trailer, pole and generator.
Model 2 Light Set 4 Light Set
Code 000-001 001-003 003-008 008-015 015-025 025-050 050-100 100-200 200-300 300-400 400-500
[ LITE ]
Code 2 LIGHT 4 LIGHT
ELECTRIC POWERED HAND TOOLS [ ELTOL ]
DELAY FACTOR = 0.64 OVERTIME FACTOR = 0.38 Includes electric powered, hand held tools not listed elsewhere in this book. Expendable bits, blades, discs, wheels, etc. shall be paid by separate invoice. Rated in accordance with Mfr's suggested retail price.
TOOLS [ TOOL ]
OVER TO Code Rate
450 600 045-060 $0.23 600 800 060-080 $0.31 800 1000 080-100 $0.39
FORK LIFT TRUCKS [ FKLFT ]
DELAY FACTOR = 0.36 OVERTIME FACTOR = 0.66 Includes attachments and accessories. Listed in accordance with the Mfr's maximum rated capacity in kilograms(pounds).
FORK LIFT TRUCKS [ FLT ]
OVER TO Code Rate
454 (1000) 1814 (4000) 010-040 $13.66 1814 (4000) 2722 (6000) 040-060 $18.06 2722 (6000) 3629 (8000) 060-080 $20.69 3629 (8000) 5443 (12000) 080-120 $28.23 5443 (12000) 7258 (16000) 120-160 $30.86 7258 (1600) 9072 (20000) 160-200 $36.12 9072 (20000) 11340 (25000) 200-250 $37.78 11340 (25000) 13608 (30000) 250-300 $40.95
6
DELAY FACTOR = 0.25 OVERTIME FACTOR = 0.77 Includes ripper and scarifier attachments and all accessories. Electronic blade
Rate $0.35 $0.72 $1.46 $3.87 $6.14 $6.47
$11.06 $19.79 $32.61 $47.70 $60.46
Rate $2.16 $4.72
control and specialty cutting tools shall be paid separately.
BLADE-MOR
Model
727 747
CATERPILLAR
Model
120G 87V serial 130G 74V serial 12E 99E serial 12F 73G serial 12F 13K serial 12F 89H serial 12G 61M serial 12H 14E 72G serial 14G 14H 140 14U serial 140G 72V serial 140H 16 49G serial 16 49G800 serial 16 G93U serial
JOHN DEERE
Model
JD-570A JD-570B JD-670 JD-670A JD-770 JD-770A, 770A-H JD-770B
GALION
Model
A-400E T-400A T-500C T-500L T-500M
[ BMOR ]
Code
2173 2178
[ CAT ]
Code
2685 2695 2710 2768 2826 2884 2890 2895 3174 3180 3185 3250 3260 3265 3290 3348 3360
[ DEER ]
Code
3890 3892 3900 3905 3910 3915 3916
[ GALN ]
Code
4940 4980 5150 5204 5210
Rate
$10.83 $16.93
Rate
$38.93 $44.15 $19.49 $29.20 $25.45 $25.98 $46.07 $51.66 $31.48 $69.02 $75.77 $32.66 $48.67 $55.14 $42.33 $61.55 $98.52
Rate
$25.41 $29.75 $28.21 $35.19 $32.09 $41.49 $52.75
Rate
$33.63 $30.70 $35.54 $31.53 $36.57
KOMATSU KOMA[ ] FOSTER [ FOST ]
Model Code Rate Model Code Rate
GD 505A-2 8980 $35.37 1700 0600 $75.05 GD 515A-1 8986 $39.93 4030 0630 $107.28 GD 605A-2 9000 $38.55 FNV-1800 0660 $73.82 GD 615A-1 9005 $47.90 FNV-4150 0693 $137.84 GD 625A-1C 9007 $65.42 HYDRAULIC POWER SYS [ HPSI ] GD 655A-2 9010 $41.58
Model Code Rate
HAMMERS, DEMOLITION & PILE HAMMR[ ] 150 0420 $56.62 260 0430 $89.12
0.36DELAY FACTOR = OVERTIME FACTOR = 0.67 300 0440 $107.47 Includes attachments, accessories and power unit. Does not include carrier.
I.C.E. [ ICE ]ABI [ ABI ]
Model Code Rate Model Code Rate
44-50 0450 $136.40 HVR-60 0100 $28.18 216 0460 $50.06 AMERICAN PILE DRIVING [ APE ] 416L 0470 $83.27 EQUIPMENT 812 0480 $122.78 Model Code Rate KENT KENT[ ] 150 180
0010 0050
$100.12 $128.61
Model Code Rate
200/500 0060 $149.20 KHB10G 0700 $12.92 ALLIED STEEL & TRACTOR AS&T[ ] KHB 15G 0710 $19.26
Model Code Rate KHB 30G 0750 $24.60 KHB 40G 0760 $36.18
800 0300 $46.32 NPK [ NPK ] HYRAM 720 HYRAM 725
0310 0320
$4.53 $7.41
Model Code Rate
HYRAM 730 0330 $9.81 4XE 0795 $10.76 HYRAM 740 0340 $13.82 6XA 0800 $10.60 HYRAM 750 0350 $15.90 H-10XB 0810 $23.10 HYRAM 77 0360 $7.28 H-12X 0815 $28.31 HYRAM 770 0370 $17.86 H-16X 0820 $25.56 HYRAM 780 0380 $27.81 H-20X 0840 $33.79 HYRAM 790 0390 $38.75 H4X,HXA 0860 $8.34 HYRAM 88 0400 $13.35 H7X 0880 $11.37 DELMAG DELM[ ] OKADA OKAD[ ] Model Code Rate Model Code Rate
D-12 0500 $21.18 UB-5 0900 $6.22 D-16 0510 $26.90 UB-8 0950 $11.38 D-22 D-30
0520 0530
$42.73 $30.70
RAMMER RAMR[ ]
D-30-32 0540 $45.86 Model Code Rate D-36-32 D46-32 D62-22
0560 0570 0580
$57.42 $64.11
$117.56
S-84 S-86
1000 1050
$39.50 $47.03
D100-13 0590 $153.25 STANLEY STAN[ ]
Model Code Rate
MB250 1100 $3.82 MB2900 1120 $19.83
7
MB4900 MB550 MB800
TELEDYNE
Model
950X TB1025 TB1425X TB2225X TB425 TB825X
TRAMAC
Model
BRH1100 BRH125 BRH250 BRH400 BRH620 BRH750 BRV950
TUNKER
Model
40.01 40.05 60.05
VULCAN
Model
1 010 100C 2300 80C
1140 1160 1180
[ TELD ]
Code
1190 1195 1200 1220 1240 1260
[ TRMC ]
Code
1300 1310 1320 1330 1340 1350 1360
[ TUNK ]
Code
1400 1450 1460
[ VULC ]
Code
1500 1520 1540 1560 1580
$35.64 $6.15 $9.51
Rate
$24.75 $26.65 $27.63 $51.93
$9.45 $17.35
Rate
$28.15 $8.07
$10.74 $9.81
$17.44 $19.51 $20.79
Rate
$128.43 $128.43
$94.64
Rate
$22.58 $30.66 $31.29 $85.09 $23.82
HYDRAULIC CRANES & EXCAVATORS, [ HCECL ] CRAWLER MOUNTED
DELAY FACTOR = 0.34 OVERTIME FACTOR = 0.69 Includes all attachments and accessories required for lifting or digging. Pavement breaker or compactor attachments are not included.
BANTAM
Model
[ BANT
Code
]
Rate
C 266 C 366 C 744
CASE
Model
[
0680 0690 1075
CASE
Code
]
$48.45 $57.27 $40.42
Rate
9030B 9040
0100B 0110
$53.62 $61.03
8
9060B 40E E-Boom 40E Y-Boom 50E 125B 170C 220B 880B Y-Boom 980B 1080 1080B 1280 1280B
CATERPILLAR
Model
312 315L 320 320BL 320L 322L 325 325BL 325L 330BL 330L 345BL 350L 375L 205 211 213 215 215B LC 215C 215D 225 225LC 225D LC 227 229 231D 231DLC 235 235B 235 Front Shovel 235B Front Shovel 235C 235DLC 245 245B 245 Front Shovel 245B Front Shovel E 180
0120B 1600 1601 1602
1602H 1602N 1602R 1609 1615
1615E 1615J 1616
1616E
[ CAT ]
Code
0300 0305 0310 0312 0315 0325 0330 0335 0340 0345 0350 0355 0360 0365 1617
1617E 1617H 1618
1619E 1619F 1619G 1620 1621 1622 1623 1625 1630 1635 1640 1642 1645 1647 1648 1649 1650
1650B 1652
1652B 1653
$126.56 $44.53 $44.96 $55.84 $50.30 $66.28 $90.11 $31.02 $48.81 $40.55 $42.31 $57.97 $51.87
Rate
$32.77 $39.39 $51.44 $55.87 $53.01 $67.55 $70.05 $77.44 $73.23 $94.83 $89.99
$125.64 $134.16 $222.30
$23.18 $30.43 $33.86 $37.97 $41.48 $45.93 $51.68 $52.30 $52.78 $67.59 $56.05 $71.88 $83.63 $85.31 $88.97 $99.57 $99.46
$111.44 $112.17 $118.09 $150.89 $165.86 $163.51 $182.39
$42.83
EL 180 1654 $44.04 G 880B 0210 $63.20 EL 200B 1654E $49.23 G 880C 0215 $62.81 E 240 1655 $56.03 G 1000 0230 $93.72 EL 240 1656 $57.60 XL4200 0260 $58.88 E 300 1657 $70.03 XL5200 0280 $72.48 E 300B 1657B $77.89 HITACHI [ HIT ] EL 300 EL 300B
1658 1658B
$72.06 $80.09 Model Code Rate
JOHN DEERE [ DEER ] UH 07LC 2630 $44.16
Model Code Rate UH 062 2660 $38.38 UH 172 2695 $83.32
450LC 1645 $125.91 UH 122 2750 $54.80 490 1660 $25.63 EX 150 2797 $40.40 490E 1660E $34.83 EX 200 LC 2800 $52.06 690A 1685 $28.43 EX 270 LC 2806 $78.28 690B 1695 $43.29 EX 300LC-2 2807 $89.65 690C 1697 $38.73 EX 300LC-3 2807A $91.50 690D 1697D $42.13 EX 330LC-5 2807B $99.31 690E LC 1697ELC $51.57 EX 370-5 2807F $105.71 790 1698 $49.42 EX 400 LC 2808 $119.28 790D 1698D $55.39 EX 450LC-5 2808K $137.36 790E LC 1698ELC $64.36 EX 550LC 2809 $177.73 792 1699 $59.39 EX 700 2810 $192.18 890 1700 $78.53 EX 750-5 2815 $225.82 890A 1705 $76.41 EX 1100 2880 $272.15 892D LC 1708 $71.29 HYUNDAI HYUN[ ] 990 992D LC
1720 1722
$88.62 $107.74 Model Code Rate
30 1725 $11.13 200LC 2950 $49.10 50 1730 $17.46 210LC-3 2952C $50.34 70 1735 $17.25 280LC 2960 $71.35 200LC 1745 $56.39 290LC 2970 $76.15 DROTT DROT[ ] 450LC 3010 $119.49
Model Code Rate INTERNATIONAL [ INTL ]
35D E boom 1835 $34.73 Model Code Rate
35D Y boom 1845 $35.18 630 4250 $32.56 40D E boom 1930 $40.54 640 HD 4260 $45.96 40D Y boom 1965 $46.04 650 HD 4280 $57.06 50D
FIAT-ALLIS [
2005
F-A ]
$53.21 KATO
Model
KATO
Code
[ ]
Rate Model Code Rate
HD450 VII 3050 $33.10 FE 18 9000 $34.24 HD700 VII LC 3060 $48.64 FE 20 HD 9010 $44.28 HD1250 VII LC 3080 $79.17 FE 20 LC FE 28
9020 9030
$40.08 $55.26
KOBELCO KOBL[ ]
FE 40 L 9040 $99.66 Model Code Rate
GRADALL GRAD[ ] SK200LC MARK III 4687 $51.84 Model Code Rate K 903B 4688 $21.17
K 904D 4693 $24.17 G 660 0150 $46.84 K 904E 4694 $25.72 G 660B 0160 $55.91 K 904 Mark II 4694A $26.38 G 660C 0170 $56.71
9
K 905 4695 K 905A LC 4697 K 907C 4700 K 907D 4702 K 907 LC 4704 K 909A 4710 K 909 LC 4711 K 912A 4712 K 914 4715 K 916 4717 SK270LC MARK IV 4720 SK400LC MARK IV 4725
KOEHRING [ KOEH ]
Model Code
366 post 1980 4752 466E 4990 566 5160 666, 666E 5225 866, 866E 5235 6611 6000 6614 6005 6612 6010 6620 6015 6625 6020 6633 6029 6644 6040
KOMATSU [ KOMA ]
Model Code
PC 120-5 9485 PC 150-1 9490 PC 150-3 9495 PC 200 LC-2 9500 PC 200-5 9504 PC 200 LC-3 9505 PC 200 LC-5 9506 PC 220 LC-2 9510 PC 220 LC-3 9515 PC 220 LC-5 9516 PC 280 LC-3 9517 PC 300 LC-1, LC-2 9520 PC 300 LC-3 9525 PC 300 LC-5 9526 PC 300 LC-6 9526A PC 360 LC-3 9527 PC 400 LC-1 9530 PC 400 LC-3 9535 PC 400 LC-5 9536 PC 400 LC-6 9537 PC 600 LC-6 9539 PC 650-1 9540 PC 650-1 Front Shovel 9550 PC 650-3 9552
$27.52 $30.41 $41.46 $44.82 $45.61 $57.55 $60.23 $67.83 $84.61 $93.41 $74.92
$123.83
Rate
$67.93 $78.22 $91.14
$114.51 $141.45
$26.61 $32.92 $32.24 $48.75 $60.76 $76.44
$113.38
Rate
$36.93 $30.59 $39.20 $38.57 $52.75 $48.81 $54.82 $49.63 $60.09 $65.58 $67.80 $62.88 $79.64 $89.91 $99.65 $94.27 $88.23
$105.57 $123.74 $131.19 $186.81 $165.86 $181.67 $184.92
PC 750-6 9555 $221.32 PC 1000-1 9560 $281.95 PC 1000 LC-1 9565 $294.41
LINK-BELT [ L-B ]
Model Code Rate
LS 1600 5390 $19.17 LS 2650 5395 $26.61 LS 2700C II 5398 $39.77 2700 QUANTUM 5399 $41.63 LS 2800 5400 $30.60 LS 2800A 5402 $39.79 LS 2800A PL 5404 $32.50 LS 2800 PL 5405 $29.48 LS 2800B 5410 $41.29 LS 3400 5475 $56.46 LS 3400C II 5477 $59.67 LS 4300 5660 $71.86 LS 4300C II 5662 $78.73 LS 4800 5750 $84.66 LS 4800 PL 5755 $69.81 LS 5400 5805 $93.35 LS 5800 5810 $100.03 LS 5800A 5812 $106.77 LS 5800C II 5814 $110.75 LS 6400 5820 $149.31 LS 7400 5830 $132.52 LS 7400A 5840 $182.50
MASSEY FERGUSON [ M-F ]
Model Code Rate
MF 450D 6245 $25.54 MF 450S 6250 $25.77
MITSUBISHI [ MITS ]
Model Code Rate
MS 090 6290 $20.16 MS 180-3 6295 $37.79 MS 180 LC-8 6296 $42.22 MS 230 LC-3 6300 $49.08 MS 240 LC-8 6305 $52.99 MS 280-2 6310 $59.68 MS 380-2 6320 $85.62 MS 450-8 6330 $94.09
NORTHWEST [ NW ]
Model Code Rate
35 DH 6335 $65.96 45 DH 6340 $78.73 55 DH 6345 $86.22 55 DH Series II 6360 $130.34
10
P&H [ P&H ]
Model Code Rate
H 750 6628 $34.26 H 1250 6630 $53.47 H 1750 6635 $74.35 H 2500 6645 $92.98 HS 2500 6650 $98.12
TAKEUCHI [ TAKU ]
Model Code Rate
TB 15 7686 $7.37 TB 025 7686A $12.61 TB 045 7686E $20.89 TB 070 7686H $23.72 TB 10S 7688 $6.12 TB 35S 7690 $11.13 TB 68S 7692 $18.85 TB 800 7695 $8.46
HYDRAULIC CRANES & EXCAVATORS, [ HCESP ] SELF PROPELLED
DELAY FACTOR = 0.29 OVERTIME FACTOR = 0.74 Includes all attachments and accessories required for lifting or digging. Pavement breaker or compactor attachments are not included.
BUCYRUS-ERIE [ B-E ]
Model Code Rate
300C/SP 1670 $37.35 320C 1672 $37.54 360C 1678 $37.91
BADGER BAGR[ ]
Model Code Rate
4425/30 1565 $54.78 4435 1570 $59.35 4435B 1573 $61.08 4435C 1573C $70.17 4445 1574 $87.56 4450 1575 $66.63 4450B 1577 $74.68 4455 1579 $88.31
CASE [ CASE ]
Model Code Rate
40E E-Boom, Cruz Air 1685 $34.83 40E Y-Boom, Cruz Air 1687 $35.05 40F E-Boom, Cruz Air 1687H $37.30 40F Y-Boom, Cruz Air 1687K $38.15 45 E-Boom, Cruz Air 1688 $44.26 45 Y-Boom, Cruz Air 1689 $49.47 45B E-Boom, Cruz Air 1689H $47.76 45B Y-Boom, Cruz Air 1689K $48.57 880R E-Boom 1690 $29.23
11
880R Y-Boom 1085 E-Boom, Cruz Air 1085 Y-Boom, Cruz Air 1085B Y-Boom, Cruz Air 1285 E-Boom, Cruz Air 1285 Y-Boom, Cruz Air 3330 Low Profile 3330B
CATERPILLAR
Model
206 212 214 224
GRADALL
Model
G 3WD, 4x4
GROVE
Model
24 36 68 1012 2535 RT-48 RT-49 RT-58 RT-418 RT-420 RT-422 RT-500D RT-525 RT-525B RT-525C RT-527.5 RT-528B RT-528C RT-60 RT-60S RT-515 RT-518 RT-520 RT-522 RT-522C RT-625 RT-630 RT-630B RT-635 RT-65 S RT-740 RT-745
1695 1696E 1696Y 1696Z 1697E 1697Y 1698E 1698H
[ CAT ]
Code
1699 1699E 1699H 1699J
[ GRAD ]
Code
0110
[ GROV ]
Code
3820 3830 3850 3870 3880 4030 4115 4285 4354 4356 4358 4359 4360 4362 4363 4365 4370 4372 4520 4540 4606 4607 4608 4609
4609G 4630 4635 4637 4640 4700 4710 4715
$29.37 $37.06 $37.39 $41.17 $43.60 $43.76 $18.81 $19.08
Rate
$27.78 $34.72 $37.33 $46.44
Rate
$48.75
Rate
$18.75 $28.77 $37.76 $42.69 $63.90 $30.58 $30.87 $32.19 $46.99 $46.99 $46.99 $66.61 $42.17 $45.34 $52.16 $43.10 $45.34 $56.50 $37.80 $39.87 $41.81 $43.92 $45.58 $44.74 $52.16 $50.74 $50.74 $57.70 $54.32 $55.92 $68.36 $88.93
RT-75 S 4720 RT-755 4725 RT-760 4727 RT-865 4730 RT-865B 4732 RT-875 4735 RT-980 4750 RT-990 4760 RT9100 4790
KOMATSU [ KOMA ]
Model Code
PW 210-1 9580
LINK-BELT [ L-B ]
Model Code
HSP 15 5500 HSP 18 5505 HSP 20 5510 HSP 22 5530 HSP 25 5535 HSP 8015 5538 HSP 8018 5538E HSP 8018XL 5538G HSP 8018C 5538H HSP 8025 5538P HSP 8025 S 5538PF HSP 8030 5538Q HSP 8035 5538R HSP 8040 5538S HSP 8050 5538T HSP 8055 5538V HSP 8060 5539
LORAIN [ LORN ]
Model Code
LRT 15H 5730 LRT 15U 5735 LRT 18U 5740 LRT 35U 5745 LRT 40U 5750 LRT 150 5755 LRT 150D 5756 LRT 180 5760 LRT 180D 5760D LRT 200 5765 LRT 200D 5765D LRT 220 5767 LRT 230 5768 LRT 230D 5768D LRT 250 5769 LRT 250D 5769D LRT 275 5770 LRT 275D 5770D
$62.49 $77.30
$106.23 $96.95
$129.33 $118.94 $118.48 $141.20 $160.60
Rate
$60.48
Rate
$36.42 $36.42 $42.95 $44.49 $49.94 $49.92 $49.92 $58.99 $49.31 $52.43 $54.97 $60.18 $86.52 $86.63 $88.78 $80.74 $97.20
Rate
$36.67 $37.94 $38.53 $58.13 $59.56 $37.34 $54.59 $37.25 $54.59 $36.84 $54.77 $39.80 $47.75 $54.80 $47.77 $54.80 $47.77 $54.80
LRT 330 5772 $56.53 LRT 400 5773 $67.30 LRT 450 5774 $70.76 LRT 500 5775 $74.14 LRT 550 5790 $79.93
P&H [ P&H ]
Model Code Rate
OMEGA 14 5790 $36.41 OMEGA 15 5792 $36.41 OMEGA 18 5794 $36.88 OMEGA 25 5795 $52.73 OMEGA 20 5796 $37.63 OMEGA 23 5796E $40.65 OMEGA 30 5796J $55.42 OMEGA 35 5796P $56.49 OMEGA 40 5797 $78.17 OMEGA 45 5797E $80.07 OMEGA 50 5797J $81.62 OMEGA 60 5798 $76.07 OMEGA 65 5799 $101.96 OMEGA 114 5799C $44.78 OMEGA 114D 5799G $42.64 OMEGA 118 5799Q $46.44 OMEGA 118D 5799S $42.80 OMEGA 120 5799U $48.25 OMEGA 120D 5799W $43.58 OMEGA 122 5799X $49.34 OMEGA 122D 5799Y $44.21 OMEGA 125 5799Z $49.74 OMEGA 128 5799ZA $48.31 R 150 5890 $28.19 R 150-1 5910 $27.66 R 180 5975 $28.54 R 200 6060 $28.89 OMEGA S-15 6062 $54.94 OMEGA S-18 6063 $54.94 OMEGA S-20 6064 $57.82 S-35 6064E $73.38
PETTIBONE [ PET ]
Model Code Rate
16 MK P Series 6500 $33.33 20 MK P Series 6580 $34.02 25 6740 $28.45 25 MK P Series 6750 $34.83 29 MK P Series 6880 $35.95 30 6900 $28.45 30 MK P Series 6903 $37.04 30 SC, 30 SC P Series 6910 $44.99 60 SC 6990 $52.70 60 SC P Series 6995 $58.99 70 7100 $57.88 70 SC 7165 $55.86
12
70 SC P Series 7170 $62.94 GROVE GROV[ ] 80 MK P Series 80 SC P Series
7250 7260
$60.15 $61.67 Model Code Rate
R.O. PRODUCTS [ ROP ] TD 520 2221 $61.24
Model Code Rate TD 522 2223 $61.24 TD 525 2224 $62.23
MC 5A 8005 $14.45 TMS 250 2850 $60.70 MC 50B 8175 $24.15 TMS 250A 2860 $61.22 MC 50C 8260 $25.58 TMS 250B 2870 $61.22
TMS 250C 2875 $81.45 HYDRAULIC CRANES & EXCAVATORS, HCETD[ ] TMS 300 2922 $73.21
TRUCK MTD. W/ CARRIER TMS 300B 2923 $91.81
0.26DELAY FACTOR = OVERTIME FACTOR = 0.77 TMS 760 3180 $129.60 Includes truck/carrier. Includes all attachment and accessories required for TMS 865 3378 $105.23 lifting or digging. Pavement breaker or compactor attachments are not TM 875 3380 $127.57 included. TMS 875 3385 $128.90 BUCYRUS-ERIE [ B-E ] TM 890 3387 $140.46
Model Code Rate TM 1075 3390 $119.10
25 XC 1360 $56.99 HIAB HIAB[ ]
30 XC 1370 $57.68 Model Code Rate
40 C 60 XC 65 C 90 XC
1475 1590 1592 1600
$46.32 $96.33 $80.55
$109.09
100 AW 1165 170 thru 174 175 thru 177
3850 3852 3854 3855
$21.05 $18.67 $16.99 $17.16
BADGER BAGR[ ] 550, 5501 3857 $19.26
Model Code Rate 650 3859 $20.31
300 Hydro-Scopic 0550 $40.53 KOEHRING KOEH[ ]
460 Hydro-Scopic 0555 $47.60 Model Code Rate
666 Hydro-Scopic 888 Hydro-Scopic
0560 0600
$64.23 $70.03
4460 Teleskoop 4465 Teleskoop
4400 4405
$42.82 $44.15
BANTAM BANT[ ] 4470 Teleskoop 4410 $52.71
Model Code Rate 4475 Teleskoop 4415 $54.04
T 744 Teleskoop 1285 $45.25 LINK-BELT [ L-B ]
T 888 1310 $57.81 Model Code Rate
T 888B 1315 $64.91 HTC 14 4505 $58.12 DEVAULT DVUT[ ] HTC 25 4507 $58.12
Model Code Rate HTC 35 4509 $68.77 HTC 50 4510 $86.60
TK 15-10 1900 $26.98 HTC 50W 4520 $82.03
GRADALL GRAD[ ] HTC 814 4530 $78.48
Model Code Rate HTC 814XL HTC 822 S
4531 4532
$82.37 $72.99
G 3W 0120 $43.41 HTC 825 4535 $64.31
G 660 0170 $43.96 HTC 825 S 4536 $74.16
G 660B 0180 $54.18 HTC 830 4537 $79.04
G 660C 0190 $55.41 HTC 835 4539 $83.64
G 800 0210 $32.10 HTC 835XL 4539C $100.75
G 880B 0220 $63.30 HTC 840 4539E $99.01
G 880C 0230 $63.99 HTC 850 4539G $103.98
G 1000 0240 $77.17 HTC 855 4539H $89.74 HTC 860 4539J $111.04
13
HTC 1040 HTC 1050 HTC 1055 HTC 1060 HTC-11100
LORAIN
Model
MCH 140 MCH 150 MCH 180 MCH 300 MCH 350 MCH 400 MCH 500
MANITEX
Model
1161 1770 2284 2592
NATIONAL
Model
Ser 4/400, 11.3 m (37') boom Ser 4/400, 14.0 m (46') boom Ser 4/400, 16.8 m (55') boom Ser 5/500A/B, 14.3 m (47') boom Ser 5/500A/B, 17.1 m (56') boom Ser 6/600, 14.3 m (47') boom Ser 6/600, 17.1 m (56') boom 856 856B 875 875B Series 85
P&H
Model
ALPHA 100 ton CN T-280 T-150 T-180 T-200 T-250 CN T-250 OMEGA T-250 OMEGA T-300 OMEGA T-350 T-300A OMEGA T-400 OMEGA T-450 T-600 XL
4540 4545 4550 4555 4600
[ LORN ]
Code
4942 4946 4947 4953 4955 4957 4960
[ MANX ]
Code
4980 4985 4990 4995
[ NATL ]
Code
4983 4984 4985 4986 4987 4989 4990 4995 4996 4997 4998 4999
[ P&H ]
Code
5000 5005 5290 5380 5470 5560 5561 5570 5580 5585 5665
5666M 5669 5670
$100.99 $106.79
$93.79 $111.88 $173.79
Rate
$66.90 $58.90 $58.90 $72.40 $64.38 $81.27 $74.52
Rate
$24.60 $44.45 $46.81 $48.56
Rate
$21.74 $21.97 $22.15 $26.44 $27.10 $26.10 $26.49 $27.05 $26.16 $27.86 $29.47 $23.50
Rate
$194.17 $82.66 $54.79 $55.27 $55.87 $66.97 $87.38 $68.33 $72.01 $73.36 $66.53 $91.71 $93.60 $96.12
OMEGA T-500 OMEGA T-650 T-750
PITMAN
Model
Hydralift HL 40 thru 95 Hydralift HL 100 thru 170 HL 857 HL 1200, 1545-T2 or 1580 POLECAT PELICAN
R.O. PRODUCTS
Model
TC-40 TC-50 TC-70 TC-80 TC-85 TC-110 TC-120 TC-125 TC-145 TC-150
5680 5745 5780
[ PIT ]
Code
6670 6675 6685 6695 6697 6699
[ ROP ]
Code
6860 6862 6864 6866 6868 6870 6872 6874 6876 6878
$93.58 $117.43
$95.57
Rate
$17.38 $20.13 $25.56 $28.26 $29.12 $32.16
Rate
$18.46 $20.16 $21.64 $21.84 $21.28 $24.90 $25.38 $25.13 $29.32 $26.59
HYDRAULIC CRANES & EXCAVATORS, [ HCETG ] TRUCK MTD LESS CARRIER
DELAY FACTOR = 0.23 OVERTIME FACTOR = 0.80 Includes all lifting and digging attachments and accessories. Truck/carrier to be paid separately. Pavement breaker or compactor attachments are not included.
BUCYRUS-ERIE
Model
[ B-E
Code
]
Rate
H-3 series two H-5 series two
GALION
Model
[
1000 1300
GALN
Code
]
$23.35 $29.82
Rate
125 P 150 P
GROVE
Model
[
1970 1980
GROV
Code
]
$24.75 $30.77
Rate
TM 100C TM 200C
2020 2040
$31.90 $35.67
14
HYDRAULIC PERSONNEL LIFTS & [ HYLFT ] AERIAL WORK PLATFORMS
DELAY FACTOR = 0.34 OVERTIME FACTOR = 0.68 Includes self propelled and power take off(PTO) units whether gas, diesel or electric. Rates for any truck or carrier mounted units shall pay for the truck separately. Reach is rated by Mfr's maximum extension in meters(feet).
BOOM TYPE
OVER TO
BOOM
Code
[ ]
Rate
0 7.6 (25)
15.2 (50)
7.6 (25) 15.2 (50) 22.9 (75)
00-24 25-49 50-74
$6.91 $18.83$29.91
SCISSOR TYPE
OVER TO
[ SCIS
Code
]
Rate
0 6.4 (21) 9.4 (31)
6.1 (20) 9.1 (30)
15.2 (50)
00-20 21-30 31-50
$7.89 $10.16$15.29
LOADERS, CRAWLER [ LDRCL ]
DELAY FACTOR = 0.25 OVERTIME FACTOR = 0.78 Includes all attachments and accessories excluding clam-action buckets and backhoe(see attachment class).
CASE [ CASE ]
Model Code Rate
350B 2370 $17.97 450B 2610 $18.51 455B 2620 $20.41 455C 2620A $21.07 1155D 3555 $37.29 1155E 3556 $40.37 1450 3560 $38.22 1450B 3565 $43.82 1455B 3568 $44.71
CATERPILLAR [ CAT ]
Model Code Rate
931B 3735 $19.17 931C 3735C $21.01 931 LGP 3740 $17.74 931B LGP 3745 $20.36 935B 3845 $23.54 935C 3845C $25.53 939C 3900 $33.10 943 4130 $35.48 943 LGP 4135 $32.01 951C 86J 1992 serial 4200 $23.90 951C 86J 2598 serial 4210 $29.96 951C LGP 86J 2598 ser 4215 $30.84 953 4220 $47.24 953 LGP 4230 $41.80
955L 85J 6247 serial 955L 85J 13X10129 ser 955L LGP 85J 13X10129 963 963 LGP 973 973 LGP 977K 977K 11K serial 977L 11K 3919 serial 977L 11K 5083 serial 977L 14X serial 977L LGP 983 983B
JOHN DEERE
Model
JD 350C JD 450C (4 speed PS) JD 455D JD 455E JD 455G JD 555 JD 555A JD 555B JD 555G JD 655 JD 655B JD 755 JD 755A JD 755B JD 855
DRESSER
Model
100E (PS) 100G 125E (PS) 125G 175C (PS) 200 250C (PS) 250E (PS)
KOMATSU
Model
D 53S-16 D 53S-17 D 55S-2 D 55S-3 D 57S-1 D 65S-6 D 66S-1
4675 4680 4685 4690 4693 4695 4698 5014 5092 5170 5180 5185 5190 5248 5265
[ DEER ]
Code
5420 5805 5807 5809
5809A 5810 5812 5814
5814A 5815 5817 5820 5822 5824 5830
[ DRES ]
Code
9000 9005 9010 9015 9020 9025 9030 9035
[ KOMA ]
Code
7878 7878A 7900 7978 8000 8017 8020
$35.26 $42.01 $42.38 $63.47 $55.38 $98.02 $78.33 $35.67 $40.05 $48.63 $58.93 $64.23 $63.85 $81.80 $95.16
Rate
$18.58 $20.21 $21.67 $21.34 $24.30 $23.27 $26.12 $25.30 $33.07 $37.97 $42.36 $33.70 $44.22 $48.49 $65.90
Rate
$21.64 $24.55 $27.36 $30.87 $54.35 $67.61 $62.17 $73.00
Rate
$34.69 $48.44 $31.51 $31.51 $52.90 $43.12 $65.58
15
D 75S-2 8056 $45.93 D 75S-3 8060 $63.46 D 75S-5 8061 $101.40 D 155S-1 8080 $136.66
LOADERS, RUBBER TIRE LDRRT[ ]
DELAY FACTOR = 0.28 OVERTIME FACTOR = 0.74 Includes all attachments and accessories. Clam-action buckets, 4WD and backhoes are excluded unless otherwise noted.
ALLIS-CHALMERS [ A-C ]
Model Code Rate
710C 0747 $15.73 714B 0750 $14.72 714C w/ backhoe 0752 $17.50 715B w/ backhoe 0765 $16.83 715C w/ backhoe 0767 $17.79
CASE [ CASE ]
Model Code Rate
W-11 1365 $16.88 W-11B 1368 $19.54 W-18 1444 $24.64 W-18 9213140 serial 1450 $28.65 W-18B 1460 $31.36 W-20 1472 $28.77 W-20B 1480 $29.64 W-20C 1482 $32.23 W-30 1565 $43.35 480B 1636 $10.65 480B w/ backhoe 1640 $12.05 480C 1650 $14.36 480C w/ backhoe 1660 $16.07 480D 1662 $16.80 480D w/ backhoe 1664 $18.94 480E w/ backhoe 1666 $15.98 480E LL 1667 $14.64 480F w/ backhoe 1668 $17.39 480F LL 1669 $15.46 480LL 1677 $16.86 570L XT 4WD 1690 $19.75 580B w/ backhoe 1705 $14.96 580C 1710 $12.75 580C w/ backhoe 1715 $14.83 580D 1717 $14.24 580D w/ backhoe 1720 $16.99 580 Super D 1725 $15.56 580 Super D w/ backhoe 1727 $18.36 580 Super E 1731 $15.50 580 Super E w/ backhoe 1735 $18.51 580K w/ backhoe 1739 $18.83 580K 4WD w/ backhoe 1740 $20.02 580 Super K w/ backhoe 1742 $20.66 580L w/ backhoe 1743 $20.60
580 Super L 4WD w/ backhoe 590 Turbo w/ backhoe 590 Super L 4WD w/ backhoe 621 721 821 680E w/ backhoe 680G w/ backhoe 680H w/ backhoe 680K w/ backhoe 680L w/ backhoe 680L 4WD w/ backhoe 780 w/ backhoe 780B w/ backhoe 780C w/ backhoe 780D w/ backhoe 780D 4WD w/ backhoe
CATERPILLAR
Model
[
1744 1745 1746 1750 1752 1754 1840 1850 1852 1854 1856 1857 1864 1866 1867 1868 1869
CAT
Code
]
$24.49 $25.09 $27.39 $33.92 $41.55 $51.29 $23.72 $22.40 $25.56 $26.94 $27.76 $28.65 $28.60 $32.41 $33.36 $34.23 $35.76
Rate
416 w/ backhoe 416 Series II w/ backhoe 416B 4WD w/ extend-a-hoe 416C 4WD w/ backhoe 426 w/ backhoe 426 Series II w/ backhoe 426C w/ backhoe 426C 4WD w/ backhoe 428 w/ backhoe 428 Series II w/ backhoe 436 w/ backhoe 436 Series II w/ backhoe 446 w/ backhoe 446B w/ backhoe 910 910E 916 920 926 926E 928G 930 41K serial 936 936E 936F 938F 950 90A serial 950 31K & 81J serial 950B 950E 950F 950F Series II 950G 966C 966D
1860 1860A 1861A 1861C 1862
1862A 1862C
1862C4 1864
1864A 1866
1866A 1868
1868B 1870
1870E 1885 1894 2065 2067
2070G 2088 2100 2110 2120 2130 2228 2270 2272 2300 2301 2303 2310 2340 2350
$19.16 $19.44 $24.48 $24.54 $21.69 $21.97 $26.11 $27.63 $21.66 $21.94 $23.37 $23.60 $31.98 $35.32 $20.83 $25.11 $28.42 $25.17 $31.37 $35.29 $42.83 $30.12 $38.91 $42.94 $44.65 $46.44 $25.93 $38.53 $49.15 $54.02 $56.45 $60.34 $63.68 $61.45 $65.68
16
966E 2360 966F 2361 966G 2362 970F 2370 980B 2376 980C 2378 980F 2381 980G 2382 988 87A6868 serial 2398 988B 50W serial 2436 992B 25K serial 2460 992C 2470 IT 12 2472 IT 12B 2472B IT 14F 2473 IT 18 2474 IT 18B 2475 IT 28 2476 IT 28B 2477 IT 28F 2477G IT 28G 2478 IT 38G 2480 IT 62G 2482
CLARK [ CLRK ]
Model Code
35C 2484 45C 2486 55C 2488 75C 2491 125B 2492 275B 2496 275C 2497
JOHN DEERE [ DEER ]
Model Code
JD-210C 2485 JD-210C w/ backhoe 2490 JD-210LE 2495 JD-310A w/ backhoe 2504 JD-310B w/ backhoe 2506 JD-310C w/ backhoe 2507 JD-310D w/ backhoe 2507D JD-310E w/ backhoe 2507E JD-310SE w/ backhoe 2507F JD-315SE w/ backhoe 2507H JD-410 w/ backhoe 2508 JD-410B w/ backhoe 2509 JD-410C w/ backhoe 2509F JD-410D w/ backhoe 2509G JD-410E w/ backhoe 2509H JD-444 2510 JD-444C 2515 JD-444D 2520
$74.26 $76.29 $86.29 $89.02 $64.76 $96.56
$100.59 $109.91
$76.58 $141.54 $146.64 $282.69
$21.68 $25.56 $30.27 $27.00 $30.98 $31.90 $35.52 $42.51 $44.80 $50.37 $70.78
Rate
$24.48 $28.74 $34.18 $46.08 $55.09 $97.30
$118.13
Rate
$13.72 $15.21 $18.99 $15.81 $16.57 $17.88 $19.60 $21.27 $23.59 $24.32 $17.79 $18.56 $21.04 $23.76 $26.70 $22.74 $24.96 $24.88
JD-444E JD-500C w/ backhoe JD-510 w/ backhoe JD-510B w/ backhoe JD-510C w/ backhoe JD-510D w/ backhoe JD-544B JD-544C JD-544D JD-544E JD-544G JD-610B w/ backhoe JD-610C w/ backhoe JD-624E JD-624H JD-644B JD-644C JD-644D JD-644E JD-644G JD-710B w/ backhoe JD-710C w/ backhoe JD-710D w/ backhoe JD-710D 4WD w/ backhoe JD-744H JD-844
DRESSER
Model
[
2521 2592 2620 2625 2630
2630D 2660 2670 2672 2673
2673B 2690 2691 2700
2700H 2710 2715 2717 2719
2719B 2720 2721 2722
2722D 2723 2725
DRES
Code
]
$27.64 $23.30 $19.44 $21.31 $24.29 $26.94 $28.32 $30.12 $28.91 $32.41 $38.60 $24.38 $26.45 $39.84 $49.84 $39.22 $42.48 $42.04 $48.26 $58.50 $30.26 $34.24 $39.20 $41.25 $85.08 $75.48
Rate
510B 510C 515B 515C 520B 520C 530 530C 540 550
FIAT-ALLIS
Model
[
2310 2310C 3517
3517C 3519
3519C 3520
3520C 3530 3540
F-A
Code
]
$23.14 $31.33 $29.67 $37.64 $34.81 $45.18 $49.91 $59.63 $68.76 $74.91
Rate
545B 745C FR 10 FR 10B FR 20 FR 30 FR 20B FR 35
3042 3046
3049H 3049I 3050 3051
3051B 3052
$26.99 $52.24 $29.50 $33.69 $63.97 $85.82 $74.59
$119.65
17
FORD
Model
FORD
Code
[ ]
Rate
80Z IV 85Z IV 90Z III
4340 4345 4350
$65.57 $80.74 $85.82
545C 650 w/ backhoe
3054 3056
$15.40 $15.96
90Z IV 95Z IV-2
4355 4360
$92.67 $119.29
655A w/ backhoe 3056F $20.61 KOMATSU KOMA[ ] 655C w/ backhoe 750 w/ backhoe
3056G 3057
$24.08 $22.33
Model Code Rate
755 w/ backhoe 3061 $25.93 W 120-3 4520 $56.51 755B w/ backhoe 3063 $29.98 W 180-1 4525 $81.33 755A w/ backhoe 3065 $28.40 WA 200-1 4536 $33.68 675D 4WD w/ backhoe 3084 $26.33 WA 250-1 4537 $45.92 675E 4WD w/ backhoe 3085 $28.69 WA 300-1 4538 $43.23 A-62 3114 $25.02 WA 320-1 4539 $52.40 A-64 3116 $30.28 WA 350-1 4540 $53.15 A-66 3118 $40.70 WA 380-1 4541 $62.01
FURUKAWA
Model
[ FURU
Code
]
Rate
WA 400-1 WA 450-1 WA 450-2
4542 4544
4544B
$62.41 $80.34 $91.51
FL 320A FL 330
HOUGH
Model
3120M 3120S
HOUG
Code
[ ]
$54.78 $60.07
Rate
WA 470-1 WA 500-1 WA 600-1
MASSEY FERGUSON
Model
[
4545 4546 4550
M-F
Code
]
$88.39 $102.40 $162.30
Rate H65C H-90E H-100C
INTERNATIONAL
3578 3884 3954
INTL[ ]
$35.00 $66.56 $74.91
MF 44C MF 50H Series S MF 50H Series S, 4WD MF 50HX Series S
5143 5150 5152 5154
$27.83 $16.23 $16.99 $17.26
Model Code Rate MF 50HX Series S, 4WD 5156 $18.24
260A 260A w/ backhoe 270A w/ backhoe 280A w/ backhoe
J C B [
2260 2270 2280 2285
JCB ]
$15.14 $16.97 $18.75 $24.64
MF 55C MF 60 w/ backhoe MF 60H Series S w/ hoe MF 66C MF 80 w/ backhoe MF 88
5170 5171 5172 5174 5182 5184
$36.10 $18.57 $19.79 $47.47 $25.33 $75.29
Model Code Rate 640 6000 $16.75 650 6010 $17.88
214S w/ backhoe 215S w/ backhoe 217S w/ backhoe
4430 4435 4440
$25.17 $28.15 $31.85
TEREX
Model
TERX
Code
[ ]
Rate
3C 1550 2WD w/ hoe 3D 1700 4WD w/ hoe 1400B w/ backhoe 1550B w/ backhoe 1600B w/ backhoe 1700B w/ backhoe
4448 4450 4455 4457 4458 4459
$17.52 $24.41 $19.94 $22.88 $26.70 $27.92
70C 72-61 72-71B 72-81
VOLVO-MICHIGAN-EUCLID [
7938 8036 8055 8080
VME ]
$71.50 $86.38
$117.08 $147.24
KAWASAKI KAWA[ ] Model Code Rate
Model Code Rate 175B 6186 $63.24
60Z IV 65Z IV KSS 80Z II 80Z III
4300 4310 4330 4335
$35.88 $42.09 $50.52 $62.01
175C 275B 275C L-70C L-90
6186C 6330
6330C 9570C 9575
$85.13 $82.53
$118.13 $38.78 $48.10
18
L-120 9595 $61.73 L-120C 9595C $61.10 L-150C 9598C $77.85 L-160 9600 $84.18 L-180C 9602C $89.74 L-190 9605 $98.77
LEADS, PILE DRIVING LEADS[ ]
DELAY FACTOR = 0.51 OVERTIME FACTOR = 0.53
FIXED [ FIXD ] Includes headblock, taper top, tip sled and connector, foot yoke, foot yoke sheave, intermediate flights, and all attachments and accessories. Rated in accordance with height of the lead measured in meters ( linear feet)
OVER TO Code Rate 0 16.8 (55) (w/o spotter) 0100 $14.85 16.8 (55) 32.0 (105) (w/o spotter) 0200 $18.95 over 32.0 (105) (w/o spotter) 0300 $23.76 0 16.8 (55) (w/ spotter) 1100 $25.06 16.8 (55) 32.0 (105) (w/ spotter) 1200 $29.95 over 32.0 (105) (w/ spotter) 1300 $35.53
SWINGING [ SWNG ] Includes headblock, taper top, tip sled and connector, foot yoke, foot yoke sheave, intermediate flights, and all attachments and accessories. Rated in accordance with the height of the lead measured in meters (linear feet).
OVER TO Code Rate 0 16.8 (55) (w/o spotter) 0400 $9.84 16.8 (55) 32.0 (105) (w/o spotter) 0500 $13.73 over 32.0 (105) (w/o spotter) 0600 $18.54 0 16.8 (55) (w/ spotter) 1400 $20.06
16.8 (55) 32.0 (105) (w/ spotter) 1500 $24.73 over 32.0 (105) (w/ spotter) 1600 $30.31
NON-OPERATED EQUIPMENT (DAILY [ NONOP ] RATES)
DELAY FACTOR = 0.62 OVERTIME FACTOR = 1.00 Note various units for different items. The following allowance is entered on the extra work bill by using the (unit listed x number of days) in the hours worked column.
The following list is limited to items with long estimated lives. Additional traffic related items such as cones and barricades, are still listed under TRAFC in this publication. Other non-operated items with short estimated lives should be treated as materials and should not be "rented". Non rented items are 1) intended to be job specific (amortized over the life of the project) and 2) have an estimated life measured by number of uses rather than a length of time.
MISCELLANEOUS [ MISC ]
Model Code Rate
Casing, 450 mm dia, per 0.3 m (Casing, 0120 $0.04 18" dia, per lf) Casing, 650 mm dia, per 0.3 m (Casing, 0130 $0.07 26" dia, per lf) Casing, 900 mm dia, per 0.3 m (Casing, 0140 $0.10 36" dia, per lf) Casing, 1800 mm dia, per 0.3 m 0150 $0.24 (Casing, 72" dia, per lf)
Casing, 2400 mm dia, per 0.3 m 0160 $0.30 (Casing, 96" dia, per lf) Casing, 2700 mm dia, per 0.3 m 0170 $0.35 (Casing, 108" dia, per lf) Casing, 3000 mm dia, per 0.3 m 0180 $0.46 (Casing, 120" dia, per lf) Pile, all depths "H" pile, per 45.0 kg 0190 $0.05 (Pile, all depths "H" pile, per hundredweight) Pipe, 250-300 mm dia, per 0.3 m (Pipe, 0200 $0.03 10-12" dia, per lf) Plate, 22 mm thick, per 9.3 sm (Plate, 0210 $1.48 7/8" thick, per 100 sf) Plate, 25 mm thick, per 9.3 sm (Plate, 0220 $1.69 1" thick, per 100 sf) Plate, 38 mm thick, per 9.3 sm (Plate, 0230 $2.54 1.5" thick, per 100 sf)
SCAFFOLDING, SHORING, [ SSFW ] FALSEWORK
Model Code Rate Metal form, 1.8 m x3.0 m, per 14.6 m 0310 $52.07 (Metal form, 6x10 box culvert, per 48 lf) Metal form, 2.4 m x3.7 m, per 15.2 m 0320 $57.69 (Metal form, 8x12 box culvert, per 50 lf) Metal form, 2.1 m x4.3 m, per 15.2 m 0330 $63.38 (Metal form, 7x14 box culvert, per 50 lf) Metal form, type 25 barrier, per 3.0 m 0340 $3.20 (Metal form, type 25 barrier, per 10 lf) Metal form, type 26 barrier, per 3.0 m 0350 $3.38 (Metal form, type 26 barrier, per 10 lf) Metal form, type 27 barrier, per 3.0 m 0360 $2.92 (Metal form, type 27 barrier, per 10 lf) Metal form, type 50 barrier, per 3.0 m 0370 $3.15 (Metal form, type 50 barrier, per 10 lf) Metal form, 1.8 m x 3.7 m girder 0380 $0.28 panel, per 0.1 sm ( 6x12 girder panel, per sf) Metal form, all heights paving, per 3.0 0390 $0.05 m (Metal form, all heights paving, per 10 lf) Scaffolding, 1.5 m section, per section 0410 $0.66 (Scaffolding, 5' section, per section) Scaffolding, 3.0 m section, per section 0420 $1.49 (Scaffolding, 10' section, per section) Scaffolding, 4.6 m section, per section 0430 $1.96 (Scaffolding, 15' section, per section) Scaffolding, bottom/top section, per 1.5 0440 $0.92 m section (per 5 ft section) Scaffolding, 2.1 m high, rolling 0450 $1.39 (Scaffolding, 7' high, rolling) Scaffolding, spider staging, plus air 0460 $28.78 compressor Shoring, 1.1 m deep x 2235 mm wide, 0510 $1.49 per section (Shoring,3.5' deep x 88" wide trench, per section) Shoring, 1.2 m deep x 3.7 m wide box, 0515 $14.22 per 7.3 m (Shoring, 4' deepx12' wide trench box, per 24')
19
Shoring, 1.5 m deep x 2235 mm wide, 0520 $1.57 Tank, metal, 30 280 liters ( 8000 0760 $7.97 per section (Shoring, 5' deep x 88" wide gallons) trench, per section) Tank, metal, 37 850 liters (10000 0770 $8.84 Shoring, 2.1 m deep x 1397 mm wide, 0530 $1.38 gallons) per section (Shoring, 7' deep x 55" wide trench, per section)
TRAFFIC SAFETY TRAF[ ]
Shoring, 2.1 m deep x 2235 mm wide, 0540 $1.65 Model Code Rate per section (Shoring, 7' deepx88" wide trench, per section) Crash cushion barrel, filled, each 0810 $0.59
Shoring, 2.4 m deep x 4.6 m wide, per 3.0 m (Shoring, 8' deepx15' wide trench
0550 $11.81 K-rail, temporary concrete barrier, per 6.1 m (20 lf)
0820 $0.58
box, per 10') Shoring, 2.4 m deep x 2.4 m max width, per 7.3 m(8' deep x 8' max width trench box, per 24' ) Shoring, 3.0 m deep x 2.4 m max box, per 4.9 m (Shoring, 10' deepx8' max trench box, per 16') Shoring, 3.0 m deep x 2.4 m max box, per 7.3 m (Shoring, 10' deepx8' max
0560
0570
0580
$23.09
$20.76
$28.80
PGDIAPAVEMENT GRINDERS, DIAMOND BLADES
[ ]
0.14 OVERTIME FACTOR = 0.87DELAY FACTOR = Includes water(but not water truck or trailer), coolant, cutting compounds and all attachments and accessories. Replacement blades are included in the rates listed below.
CCUTCONCUT [ ]
trench box, per 24') Model Code Rate Wood, 50 mm x255 mm, per 30.5 m 0605 $0.19 (Wood, 2"x10", per 100 lf) BC-38 (136 blades) 0500 $126.47 Wood, 50 mm x305 mm, per 30.5 m 0610 $0.24 BC-244 (187 blades) 0505 $162.05 (Wood, 2"x12", per 100 lf) BC-1268 (48 blades) 0510 $53.78 Wood, 100mm x100mm, per 30.5 m (Wood, 4"x4", per 100 lf)
0615 $0.16 CUSHION CUT CUCT[ ]
Wood, 100 mm x150 mm, per 30.5 m 0620 $0.23 Model Code Rate (Wood, 4"x6", per 100 lf) Wood, 100 mm x205 mm, per 30.5 m (Wood, 4"x8", per 100 lf)
0625 $0.33 HG-130A (127 blades) PC-390(171 blades)
0600 0610
$133.91 $202.42
Wood, 100 mm x305 mm, per 30.5 m (Wood, 4"x12", per 100 lf) Wood, 150 mm x305 mm, per 30.5 m
0630
0635
$0.49
$0.81
PENHALL
Model
PENH
Code
[ ]
Rate
(Wood, 6"x12", per 100 lf) Wood, 150 mm x455 mm, per 30.5 m (Wood, 6"x18", per 100 lf)
0640 $1.31 G-38 (172 blades)
TARGET
0800
TARG[ ]
$255.62
Wood, 205 mm x405 mm, per 30.5 m (Wood, 8"x16", per 100 lf)
0645 $1.61 Model Code Rate
Wood, 305 mm x455 mm, per 30.5 m (Wood, 8"x18", per 100 lf) Wood, 305 mm x305 mm, per 30.5 m
0650
0655
$1.81
$1.56
CG-65 (96 blades) PRM-3804 (170 blades)
0900 0905
$91.37 $279.47
(Wood, 12"x12", per 100 lf) Wood form, type 27 barrier, per 2.4 m (Wood form, type 27 barrier, per 8 lf) Wide flange beam, all depths, per 45 kg (Wide flange beam, all depths, per hundred wt.)
0660
0670
$0.34
$0.04
PGT-CPAVEMENT GRINDERS, TUNGSTEN-CARBIDE BITS
[ ]
0.22 OVERTIME FACTOR = 0.81DELAY FACTOR = Includes water(but not water truck or trailer), coolant, cutting compounds and all attachments and accessories. Replacement bits or tips are included in the rates listed below.
TANK
Model
TANK
Code
[ ]
Rate BARBER-GREENE
Model
[ B-G
Code
]
Rate
Tank, metal, 0-2270 liters (0-600 gallons) Tank, metal, 2270-4540 liters (6001200 gal) Tank, metal, 4540-9840 liters (12002600 gal)
0710
0720
0730
$0.88
$1.20
$2.98
RX-20 RX-30 RX-40B RX-50 RX-80B
0100 0105 0110 0115 0120
$122.80 $193.41 $215.33 $253.58 $401.45
Tank, metal, 22 710 liters (6000 gallons) 0740 $6.00 Tank, metal, 28 390 liters (7500 gallons) 0750 $7.53
20
CATERPILLAR [ CAT ]
Model Code Rate
PM-800 0200 $327.32 PR-105 0201 $65.44 PR-275 0205 $171.76 PR-450 0210 $235.35 PR-750 0215 $318.18 PR-750B 0216 $344.77 PR-1000 0220 $445.76
C.M.I. [ CMI ]
Model Code Rate
PR-275 RT 0150 $159.57 PR-375 0155 $193.25 PR-450 0160 $222.89 PR-525 0165 $223.45 PR-500FL 0170 $259.29 PR-750 0175 $300.95 PR-800-7 0177 $324.22 PR-1000 0180 $402.75
INGERSOLL-RAND [ I-R ]
Model Code Rate
MW-175 0280 $68.96 MW-250 0285 $77.06 MW-250C 0286 $95.29 MT-6520 (crawler) 0300 $222.73 MW-6520 0305 $164.61 MW-6520HC 0310 $196.45 MT-7000 0315 $275.51
WIRTGEN [ WIRT ]
Model Code Rate
300VC 0380 $28.93 1000VC 0390 $116.42 1900DC 0395 $240.52 2000VC 0400 $233.86 2100VC 0402 $302.63 2200VC 0405 $373.19 3500VC 0410 $385.45 4200VC 0420 $403.53
PUMPS, WATER [ PUMWA]
DELAY FACTOR = 0.43 OVERTIME FACTOR = 0.60 Centrifugal and diaphragm types (including submersibles). Rate includes power (gas, diesel or electric generator), 7.6 meters(25 lineal feet) of suction hose, 15.2 meters (50 lineal feet) of discharge hose, foot valve and all fittings, attachments and accessories.
A PUMP [ APMP ] Listed by Mfr's rated capacity measured in thousands of liters per minute (thousands of gallons per hour) at 3.0 meters (10 feet) of suction head.
OVER TO Code Rate 0 0.6 (10) 000-010 $1.80 0.6 (10) 1.3 (20) 010-020 $2.46 1.3 (20) 1.9 (30) 020-030 $3.42 1.9 (30) 3.2 (50) 030-050 $10.43 3.2 (50) 7.9 (125) 050-125 $13.53 7.9 (125) 15.8 (250) 125-250 $16.66
INLET-SUCTION HOSE [ INHS ] Additional 7.6 meter (25 foot) lengths of suction hose shall be paid based on the inside hose diameter in millimeters (inches).
OVER TO Code Rate 0 60 (2.5) 0-2.5 $0.05 60 (2.5) 80 (3) 2.5-3.5 $0.09 80 (3) 100 (4) 3.5-4 $0.13 100 (4) 150 (6) 4-6 $0.21
OUTLET-DISCHARGE HOSE [ OUHS ] Additional 15.2 meter (50 foot) lengths of discharge hose shall be paid based on the inside hose diameter in millimeters (inches).
OVER TO Code Rate 0 60 (2.5) 0-2.5 $0.04 60 (2.5) 90 (3.5) 2.5-3.5 $0.07 90 (3.5) 100 (4) 3.5-4 $0.10 100 (4) 150 (6) 4-6 $0.14
ROLLERS, TANDEM STEEL WHEELS [ ROL-2 ]
DELAY FACTOR = 0.24 OVERTIME FACTOR = 0.78 Includes all attachments and accessories.
BOMAG
Model
BW-4AS BW-6AS BW-10AS BW-12AS
DRESSER
Model
S3-5B S8-12A S10-14A
[ BMAG ]
Code
1150 1155 1160 1165
[ DRES ]
Code
2500 2520 2525
Rate
$13.61 $15.37 $24.74 $25.58
Rate
$15.84 $23.31 $24.13
21
FERGUSON [ FERG ] REXNORD RXND[ ]
Model Code Rate Model Code Rate
3-5 ton 4048 $8.88 3-5 ton 8566 $10.68 3-5A 4048A $10.30 4-6 ton 8572 $11.29 4-6A 4142A $10.46 5-8 ton 8578 $22.13 5-8 ton 4236 $21.64 7-10 ton 8584 $22.34 5-8A 4240 $19.26 8-12 ton 8590 $22.71 8-12 ton 4424 $19.37 10-14 ton 8596 $23.05 8-12B 4424B $22.79 8-12A 4430 $20.32 ROLLERS, RUBBER TIRE, SELF ROLRT[ ] 10-14 ton 4450 $20.33 PROPELLED 10-14A 4455 $20.87 0.31DELAY FACTOR = OVERTIME FACTOR = 0.72 10-14B 4455B $23.39 Includes all attachments and accessories.
GALION GALN[ ] BUFFALO-BOMAG [ B-B ]
Model Code Rate Model Code Rate
4-6 ton roll-o-static 4650 $13.53 BW 20R 2624 $17.14 S4-6A, S4-6B 4670 $16.38 CATERPILLAR [ CAT ] 5-8 ton roll-o-static S5-8A
4800 4820
$16.14 $20.44 Model Code Rate
8-10.5 ton roll-o-static 4988 $16.82 PS 110 3460 $26.04 S8-10.5A 5000 $21.19 PS 130 3465 $25.44 8-12 ton roll-o-static 5176 $17.16 PS 180 3470 $27.68 S8-12A 5190 $21.90
HYSTER
Model
HYST
Code
[ ]
Rate
DYNAPAC
Model
DYPC
Code
[ ]
Rate
CP 15 3500 $24.38 C 330A 3-5 ton 6520 $16.13 CP 21 3510 $34.14 C 330B 3-5 ton (Hypac) 6520B $14.76 CP 27 3520 $42.34 C 330A 4-6 ton 6525 $17.60 C 330B 4-6 ton (Hypac) 6526 $16.87 GALION GALN[ ]
C 340A 5-8 ton 6530 $17.83 Model Code Rate C 340A 8-10 ton 6540 $18.41 C 340B 5-8 ton 6545 $19.54 3500 4310 $18.86
C 340C 5-8 ton (Hypac) 6546 $22.14 P 3000 4315 $20.65
C 340B 8-10 ton 6548 $20.30 P 3500A 4320 $21.70
C 340C 8-10 ton (Hypac) 6549 $22.61 HYSTER HYST[ ] C 350B 8-12 ton 6710 $19.38 Model Code Rate C 350B 10-14 ton 6740 $19.90 C 350C 8-12 ton 6750 $21.70 C 530A 5401 $24.18 C 350C 10-14 ton 6755 $22.45 C 550A 5494 $25.32 C 350D 8-12 ton 6757 $23.28
INGRAM
Model
INGM
Code
[ ]
Rate
ROLLER-TAMPING, SEGMENTED, SHEEPSFOOT, SELF PROPELLED
ROTAM[ ]
0.22DELAY FACTOR = OVERTIME FACTOR = 0.81
4-6 ton FB 6900 $13.00 Includes all attachments and accessories.
5-6.5 ton FB 6965 $14.69 BUFFALO-BOMAG [ B-B ] 8-12 ton HB 7175 $20.54 Model Code Rate 10-14 ton HB 7275 $21.19
K 300 1630 $35.41 K 301 1635 $46.05 K 401 1638 $61.37
22
CATERPILLAR
Model
815 815B 815F 825B 825C 835
RAYGO
Model
30 45 RAM PAK 45
REXNORD
Model
3-30 3-35 PACTOR 3-45 PACTOR 3-50, 3-50A PACTOR 3-55, 3-55B PACTOR
[ CAT ]
Code
2300 2310 2320 2500 2510 2700
[ RAGO ]
Code
6490 6500 6505
[ RXND ]
Code
7120 7127 7130 7140 7150
Rate
$50.68 $83.21 $94.52 $80.29
$124.28 $95.74
Rate
$37.11 $59.91 $66.13
Rate
$46.38 $69.58 $84.92 $82.13
$112.54
ROLLERS-TAMPING, SEGMENTED, [ ROTAT ] SHEEPSFOOT, TOWED
DELAY FACTOR = 0.50 OVERTIME FACTOR = 0.55 Includes all attachments and accessories. Listed by drum dimensions in millimeters (feet) in either direction. The first digit is the diameter and the second digit is the length of each drum.
SINGLE DRUM UNIT [ ADRU ]
Model Code Rate
1220 mm x1220 mm (4'X4') & under over 1220 mm (4') - not over 1520 mm (5') over 1520 mm (5')
4X4 4X5
5
$1.27 $1.47
$2.63
DOUBLE DRUM UNIT [ DDRU ]
Model Code Rate
1220 mm x1220 mm (4'X4') & under, each over 1220 mm (4') - not over 1520 mm (5'), each over 1520 mm (5'), each
4X4
4X5
5
$3.26
$10.67
$18.02
ROLLERS, VIBRATORY, SELF [ ROVIB ] PROPELLED
DELAY FACTOR = 0.32 OVERTIME FACTOR = 0.71 Includes all attachments and accessories.
BUFFALO-BOMAG
Model
[ B-B
Code
]
Rate
BW 210 2060 $30.38
23
BW 210A BW 213 BW 214
BOMAG
Model
BW 35 BW 60, 60S BW 65, 65S BW 75, 75S BW 85T BW 90 BW 120AD BW 142PD BW 151AD BW 170AD, D BW 172AD, D BW 202AD
BROS
Model
VM 255 VM 268, VM 268H VM 278
CASE
Model
50B W 251 252, W 252 752, W 752 1102, W 1102 1102D, W 1102D 602D 752B
CATERPILLAR
Model
CB 214 CB 214B CB 224 CB 224B CB 314 CP 323 padfoot drum CS 323 smooth drum CB 414 CS 431 CS 431B CP 433 padfoot drum CP 433B padfoot drum CS 433 smooth drum CS 433B smooth drum CB 434 CB 514
2070 2080 2090
[ BMAG ]
Code
0700 0800 0900 1000 1200 1300 1350 1359 1365 1380 1385 1400
[ BROS ]
Code
2023 2024 2025
[ CASE ]
Code
2228 2400 2405 2450 2500 2505 2510 2520
[ CAT ]
Code
8025 8026 8030 8031 8035 8040 8042 8045 8050 8051 8055 8056 8060 8061 8062 8065
$32.48 $31.55 $33.37
Rate
$4.87 $6.56 $5.09 $7.31
$14.16 $8.18
$19.32 $26.99 $39.54 $31.32 $32.99 $53.87
Rate
$33.13 $41.21 $55.85
Rate
$4.33$14.45 $16.60 $34.98 $41.84 $46.22 $29.39 $38.48
Rate
$16.05 $17.38 $17.24 $19.39 $19.15 $33.60 $31.09 $34.47 $30.40 $38.88 $37.33 $45.48 $34.63 $42.40 $40.29 $43.11
CB 534 8067 CS 551 8070 CP 553 padfoot drum 8075 CS 553 smooth drum 8080 CP 563 padfoot drum 8082 CS 563 smooth drum 8083 CS 563C 8083C CB 614 8085 CB 634 8095 CB 634C 8095C
DYNAPAC [ DYPC ]
Model Code
LR 90 2401 A 36V, A 36D 2405 CA 12 2409A CA 12D 2409B CA 12PD 2409E CA 12PDB strikeoff blade 2409H CA 15 2410 CA 15A 2420 CA 15D 2421 CA 20D 2422 CA 15PD 2425 CA 25 2430 CA 25S 2440 CA 25A, CA 25D 2450 CA 25PD 2455 CA 25T 2460 CA 30 2462 CA 30D 2464 CA 51S, CA 51D 2466 CA 55D 2468 CA 151PDB 2469 CC 10, CC 10 series II 2470 CC 10A 2472 CC 12 2472E CC 14 2473 CC 21 2474 CC 21 II 2474B CC 211 2474C CC 42 II Dynatronic 2475 CC 42A 2476 CC 50 2482 CC 50A 2488 CC 50PD 2488E CC 50S 2489 DD 18 2498 300V 2499E 2100V 2499H
$52.99 $51.84 $57.02 $53.22 $62.75 $58.64 $58.96 $63.01 $65.11 $66.54
Rate
$8.45 $21.75 $24.70 $24.63 $25.15 $24.96 $36.13 $35.78 $39.87 $35.16 $36.90 $47.19 $44.68 $50.44 $52.91 $37.65 $51.08 $55.93 $64.01 $67.10 $47.75 $17.94 $13.97 $19.69 $28.32 $33.52 $36.92 $43.01 $51.07 $49.92 $48.75 $61.76 $99.16 $90.37
$6.31 $8.32 $8.18
ESSICK [ ESIK ]
Model Code Rate
VR 30RE 2700 $5.61 VR 42RE 2820 $14.32 V 30WR, V 30W2-R 2902 $5.56
HYSTER [ HYST ]
Model Code Rate
C 612B C 610A
3450 3500
$35.82 $21.14
C 610B 3540 $33.92 C 615B 3562 $36.20 C 617B 3563 $36.70 C 620B 3566 $35.55 C 625B C 627B
3570 3572
$37.39 $38.08
C 727A 3572E $48.99 C 748A (Hypac/Hyster) C 766A
3572F 3572G
$20.65 $47.45
C 766B (Hypac/Hyster) C 850A C 850B (Hypac/Hyster) C 852A
3572H 3572J 3572K 3572N
$56.25 $49.78 $63.09 $55.73
C 852B (Hypac/Hyster) C 860A
3572P 3572S
$66.73 $54.31
C 860B (Hypac/Hyster) 3572T $63.59
INGERSOLL-RAND [ I-R ]
Model Code Rate
DD 22 DD 23
3565 3570
$21.76 $16.43
DD 24 3572 $22.71 DA 30 3573 $17.56 DD 35 3573C $19.15 DA 40 3573E $35.05 DA 41 DA 48
3573G 3573M
$37.57 $46.91
DA 50 3574 $49.89 DD 65 3574A $45.61 DF 84 3574B $78.86 DS 84 3574C $75.32 DD 90 DD 110
3574D 3574F
$54.36 $59.49
DD 145 3574J $68.02 SPA 56 3810 $40.08 SP 48 3880 $35.06 SP 48DD 3885 $36.79 SPF 48 SPF 48B
3890 3892
$39.27 $40.57
SP 54 4000 $33.22 SP 54DD 4005 $35.36 SPA 54 4010 $34.14 SPF 54 4020 $38.19
24
SP 56 4030 $42.03 2-84 RANGER 4830 $65.32 SP 56DD 4035 $45.14 220A RASCAL 4840 $29.24 SP 56DH 4037 $56.64 320A RASCAL 4876 $36.61 SPF 56 4040 $46.88 320S RASCAL 4890 $33.67 SPF 56B 4050 $50.01 400A RASCAL 5010 $34.03 SPF 56DH 4080 $58.24 404B RUSTLER 5110 $39.78 SPF 56DHB 4090 $62.43 410A RASCAL 5150 $37.89 SP 60 4100 $63.99 600A RASCAL 5220 $45.67 SP 84 4105 $61.80 4000 RASCAL 5235 $46.48 SP 60DD 4110 $89.29 4200 RASCAL 5236 $52.91 SPF 60 4120 $95.88 4404 RUSTLER 5236E $18.83 SPF 60B SPF 60C SPF 84
4130 4132 4133
$103.61 $88.90 $63.64
RAMMAX
Model
RAMX
Code
[ ]
Rate
SPF 84B SD 40D SD 40F w/ blade SD 70 SD 100 SD 100D SD 100F
4134 4138
4138FB 4139 4140
4140D 4140F
$68.44 $34.33 $37.42 $38.93 $51.46 $63.21 $63.80
P 33/24 P 33/24 w/ remote P 51 S 51 P 47
SAKAI [
4605 4606 4625 4630 5290
SAKI ]
$13.15 $12.35 $50.24 $21.94 $23.82
SD 115D 4141D $73.06 Model Code Rate SD 150D
KOEHRING-BOMAG
4143D
KOBO[ ]
$79.08 SV 70 SV 70D
8025 8026
$33.69 $36.98
Model Code Rate SV 91 8050 $47.42
BW 120AC BW 120AD BW 121AD
4168E 4169 4193
$19.25 $19.29 $17.01
SV 91D SV 200D
TAMPO
8051 8060
TAMP[ ]
$49.90 $27.33
BW 130AD 4193E $21.22 Model Code Rate BW 140AD BW 141AC BW 141AD BW 142D BW 172 BW 172D BW 213D BW 214D BW 215D BW 217D BW 220D
MIKASA
4194 4194B 4194E 4194H 4212
4212E 4237 4238 4240 4242 4250
MIKA[ ]
$33.77 $38.80 $31.92 $26.27 $29.85 $32.92 $49.49 $62.05 $57.89 $73.90 $51.92
RP 16D (HD) RP 28D RP 48D RP 58D RS 16 (HD) RS16A (HD) RS 16D (HD) RS 28C RS 28D RS 156A RS 166A RS 188A
5990 5995 6110 6115 6170 6180 6185 6315 6320 6340 6350 6370
$34.74 $45.44 $51.14 $52.95 $31.63 $33.75 $34.29 $40.99 $42.31 $37.59 $47.67 $57.30
Model Code Rate RS 210 6400 $46.97
MDR 7DW 4404 $4.97 WACKER WACK[ ]
MDR 9G 4405 $7.69 Model Code Rate MDR T38S MRV 10GA
RAYGO
4407 4409
RAGO[ ]
$5.12 $9.56 R 900
R 1000 W 55T
7850 7855 7860
$10.97 $18.63 $7.07
Model Code Rate W 74L, W 74T 7880 $7.34
1-36 REBEL 2-36 ROMPER 2-66 RANGER
4805 4810 4820
$7.33 $15.99 $50.28
W 74 W 75 WDH 84 WDH 86-110
7890 7900 7910 7912
$6.95 $5.96
$10.41 $14.07
25
WHK 90, WHK 90L 7915 $12.10 8460 1178 $164.92
SHOVELS & CRANES, CRAWLER [ S&CCL ]
DELAY FACTOR = 0.34 OVERTIME FACTOR = 0.70 Includes all attachments and accessories when used as a crane, clamshell, dragline or for pile driving(not including leads or driving equipment).
LINK-BELT [ L-B ]
Model Code Rate
LS 78 4702 $49.71 LS 78 pipeliner 4724 $51.97 LS 98 4826 $51.92 LS 98 pipeliner 4852 $58.16 LS 98A 4924 $53.08 LS 108B 4980 $63.28 LS 108D 4981 $83.63 LS 118 4998 $85.34 LS 218H 5010 $140.56 LS 318 5012 $87.36 LS 338 5020 $99.78 LS 518 5124 $148.89
MANITOWOC [ MTWC ]
Model Code Rate
2900 WC 5764 $69.09 3000 W 5812 $67.08 3900B (100 ton) 6036 $117.15 3900 W VICON series 2 6132 $201.37 4000 W VICON 6180 $152.92 4100 W VICON series 1 6196 $240.60 4600 VICON series 1 6328 $387.34 4600 VICON series 3 6332 $389.51
P&H [ P&H ]
Model Code Rate
535 7716 $65.65 550 7748 $72.27 670 WLC 7892 $92.02
SHOVELS & CRANES, TRUCK MOUNTED [ S&CTK ]
DELAY FACTOR = 0.37 OVERTIME FACTOR = 0.68 Includes truck/carrier. Includes all attachments and accessories when used as a crane, clamshell, dragline or for pile driving(leads and driving equipment not included).
AMERICAN HOIST & [ AMHD ] DERRICK
Model Code Rate 5470 1015 $89.83 5530 1080 $131.92 7450 1130 $61.27 7460 1140 $111.52 7530 1170 $134.85
8470 1179 $243.94
LINK-BELT [ L-B ]
Model Code Rate
HC 48A 4332 $47.17 HC 108B 4960 $45.16 HC 108C 4970 $97.91 HC 138 4992 $63.44 HC 138A 4995 $151.46 HC 218 5050 $77.17 HC 218A 5051 $147.31 HC 228H 5054 $178.69 HC 238A, 238B 5065 $163.79
P&H [ P&H ]
Model Code Rate
440 TC 7240 $66.63 650A TC 7720 $91.40 670 TC 7790 $95.55 790 TC 7880 $78.11 8115A TC 7950 $111.75
SANBLASTING EQUIPMENT [ SANBL ]
DELAY FACTOR = 0.56 OVERTIME FACTOR = 0.48 Includes helmets, gauntlets, 30.5 meters(100 feet) of hose, pot, all control valves, nozzles and other attachments and accessories. Rated in accordance with the capacity of the pot measured in kilograms(pounds)of sand.
REMOTE CONTROL ONLY [ REMC ]
OVER TO Code Rate
45 (100) 159 (350) 010-035 $1.18 159 (350) 272 (600) 035-060 $1.56 272 (600) 454 (1000) 060-100 $1.58 454 (1000) 680 (1500) 100-150 $1.99 680 (1500) 907 (2000) 150-200 $2.22
SAWS, CHAIN AND EARTH AUGER [ SAWCH ] ATTACHMENT
DELAY FACTOR = 0.21 OVERTIME FACTOR = 0.80 Hand held type, one or two man, gas, air or electric powered including all attachments and accessories. Blades, chains and tips shall be paid separately. Saws which cost less than $500 are considered minor tools and are no longer listed. Rated in accordance with Mfr's kilowatts (horsepower).
SAWS [ SAW ]
Model Code Rate
>3.7 (5 ) 30 amps @ 120V 5-HP $1.20
26
0
SAWS, CONCRETE AND MASONRY [ SAWCO ]
DELAY FACTOR = 0.24 OVERTIME FACTOR = 0.78 Self powered gas, air or electric powered. Includes water ( but not water truck or trailer), coolant, cutting compounds and all attachments and accessories. Saw blades or abrasive discs shall be paid in accordance with the following sawkerf codes.
SINGLE & MULTI-BLADE [ ABOP ] OPERATION Listed in accordance with Mfr's rated kilowatts (horsepower).
OVER TO Code Rate 7.5 (10) 0-10 $1.68
7.5 (10) 14.9 (20) 10-20 $3.62 14.9 (20) 24.6 (33) 20-33 $7.15 24.6 (33) 33.6 (45) 33-45 $8.23 33.6 (45) 48.5 (65) 45-65 $10.33
BLADE SAWKERF [ ABSK ] The following allowance is entered on the extra work bill by using the length x depth per blade.
UNITS Code Rate Rate /blade/ 30.5 m (100 lin ft) / 25 mm 100'/IN $17.00 (inch) depth Rate/blade/ 0.3 m (lin ft) / 25 mm (inch) LF-INDE $0.17 depth
SCRAPERS, SELF PROPELLED [ SCRSP ]
DELAY FACTOR = 0.30 OVERTIME FACTOR = 0.72 Includes all attachments and accessories.
CATERPILLAR
Model
613 613B 613C 615 615C 621B cushion hitch 623B 623E 623F 627B push pull 627E non push-pull 627E push-pull 631C 67M5012 serial 631D 631E 633C non cushion hitch 633C cushion hitch 633C 66M693 serial 633D 637 cushion, non-push-pull 637 non-cushion, push-pull 637D non push-pull
[ CAT ]
Code
1395
1400
1402
1415
1416
1680
1700
1702
1703
1770
1772
1773
2170
2180
2185
2305
2315
2320
2330
2375
2410
2460
Rate
$31.61 $41.05 $55.35 $73.48 $82.82 $89.82 $95.65
$121.44 $130.07 $115.27 $130.89 $137.64
$90.64 $131.86 $158.26
$82.96 $82.94 $96.37
$142.56 $125.95 $128.33 $178.88
637D push-pull 639D 637E 637E push-pull 641B non cushion hitch 641B cushion hitch 651B non cushion hitch 651B cushion hitch 651E 657B non cushion, non p-p 657B cushion, push-pull 657E non push-pull 657E push-pull 660B 666B
JOHN DEERE
Model
JD 760A
JD 762
JD 762A
JD 762B
JD 860A
JD 860B
JD 862
JD 862B
INTERNATIONAL
Model
412B 431B 433B
TEREX
Model
S 11EB S 23E 33TOT-H-93SH, elev S 24 49LOT-76SH serial S 24B 023-024 serial S 24C
WABCO
Model
101F 101G 111A 222G 222H
2470
2475
2476
2477
2620
2655
2935
2970
2975
3360
3370
3375
3380
3470
3600
[ DEER ]
Code
3845
3860
3865
3866
3920
3930
3940
3942
[ INTL ]
Code
5631
5637
5643
[ TERX ]
Code
8245
8250
8260
8270
8275
[ WAB ]
Code
8570
8575
8640
8700
8704
$183.13 $193.57 $215.58 $221.44 $103.37 $150.91 $157.18 $159.83 $214.12 $226.04 $233.02 $292.43 $303.10 $132.76 $190.65
Rate
$30.52 $41.90 $46.43 $59.61 $47.31 $50.29 $64.65 $97.97
Rate
$45.01 $88.23
$118.64
Rate
$32.94 $86.87
$102.20 $136.41 $159.85
Rate
$34.20 $40.28 $35.27 $70.40 $85.23
27
TRACTORS, CRAWLER [ TRACC ] D-6C LGP D-6D D-6D SA D-6D LGP D-6H D-6H Series II D-6H LGP D-6R DS D-7G D-7G LGP D-7G SA D-7H D-7H Series II D-7H LGP D-8K D-8L D-8L SA D-8N D-8R D-9H D-9L D-9N D-10 D-10N D-11N
JOHN DEERE
Model
[
3710 3720 3725 3730 3732 3733 3735 3800 4180 4200 4210 4215 4216 4220 4858 4862 4863 4864 4870 5160 5165 5170 5220 5225 5230
DEER
Code
]
$36.19 $43.02 $48.46 $45.80 $49.68 $53.74 $54.57 $59.17 $69.33 $67.28 $64.22 $71.46 $78.30 $78.42 $83.95
$109.60 $105.89
$97.47 $110.99 $108.28 $139.75 $128.10 $215.90 $175.90 $291.29
Rate
JD 350C JD 350D JD 400G JD 450C JD 450D JD 450E JD 450G JD 550 JD 550A JD 550B JD 550G JD 650G JD 750 JD 750B JD 750 LGP JD 750B LGP JD 850 JD 850B JD 850 LGP JD 850B LGP
DRESSER
Model
[
5360 5365 5405 5474 5476 5478 5479 5480 5481 5483 5484
5484A 5485 5486 5487 5488 5490 5491 5492 5495
DRES
Code
]
$15.62 $17.01 $16.57 $17.61 $18.44 $18.08 $21.11 $20.33 $22.04 $20.69 $24.69 $27.69 $32.63 $35.74 $35.79 $41.59 $42.31 $48.22 $47.40 $52.67
Rate
TD 7E TD 7G TD 8E
9100 9102 9105
$18.71 $20.75 $23.22
DELAY FACTOR = 0.32 OVERTIME FACTOR = 0.70 Includes all attachments and accessories such as dozer blade and power control blocks when needed, but does not include backhoe, winch or ripper units listed elsewhere in this schedule.
CASE [ CASE ]
Model Code Rate
350 1820 $13.32 350B 1825 $15.61 450 1868 $13.20 450B 1869 $16.80 450C 1869E $17.89 475 1870 $22.99 550 2000 $18.35 650 2100 $21.37 850 2128 $16.74 850B 2130 $19.21 850C 2135 $22.40 850D 2140 $23.86 1150B 2250 $26.12 1150C 2255 $32.27 1150D 2257 $32.63 1150E 2258 $34.28
CATERPILLAR [ CAT ]
Model Code Rate
D-3 2340 $14.76 D-3B 2345 $17.59 D-3 LGP 2350 $15.44 D-3B LGP 2355 $18.94 D-3B SA 2370 $18.81 D-3C 2380 $19.33 D4C III 2450 $25.80 D-4D 2655 $17.66 D-4E direct drive 2660 $19.98 D-4E power shift 2665 $21.37 D-4H 2670 $26.84 D-4H LGP 2675 $28.31 D-4H Series II 2680 $28.13 D-4E SA 2772 $22.09 D-4E LGP power shift 2780 $21.57 D-4E LGP direct drive 2782 $21.57 D-5 3194 $26.30 D-5B power shift 3206 $30.05 D-5B SA 3325 $30.93 D-5B LGP 3345 $32.90 D-5C 3346 $27.92 D-5H 3347 $37.67 D-5H Series II 3348 $41.12 D-5H LGP 3350 $40.92 D-6C direct drive 3645 $32.87 D-6C power shift 3688 $33.55
28
TD 8G 9107 $25.41 TD 12 9110 $34.19 TRACTORS, HEAVY TRACH[ ] TD 12 LGP 9115 $39.24 TD 15C 9120 $52.10 0.30DELAY FACTOR = OVERTIME FACTOR = 0.73 TD 15E 9122 $60.25 Includes all attachments and accessories such as dozer blade, power control
TD 15C LGP TD 20E TD 20G
9125 9130 9135
$49.92 $63.82 $81.38
units and push blocks, when needed, but does not include backhoe, winch or ripper units listed elsewhere in this schedule.
CATCATERPILLAR [ ]
TD 20G LGP 9137 $89.13 Model Code Rate TD 25E 9139 $87.42 TD 25G 9140 $121.57 814 1400 $59.31
FIAT-ALLIS
Model
[ F-A
Code
]
Rate
814B 824B 824C
1410 1720 1730
$95.86 $87.24
$122.00
10C 6043 $37.91 834B 2010 $189.73
10C LGP 14C FD 20 21C
6044 6048 6056 6060
$38.85 $47.43 $76.77 $73.34
TRACSTRACTORS, RUBBER TIRE, INDUSTRIAL, FARM & SKID STEER
[ ]
0.22 OVERTIME FACTOR = 0.79DELAY FACTOR =
FD 30 31 FD 40
6060E 6061
6061E
$92.17 $119.43 $146.26
<5037.3 kW (50 HP) OR LESS [ ] Including, but not limited to the following: Bobcat--440B, 443B, 450, 453, 542B, 543B, 553, 742B, 743B, 753, 763, 773,
KOMATSU KOMA[ ] 1840, 7753 Case-- 1818, 1825, 1835C, 1838
Model Code Rate Deere-- 3375, 4475, 5200, 5575, 6675, 7775 Ford-- L250, L454, L455, L553, L555, L781
D 21P-6 D 31A-16
7965 7970
$18.07 $16.20
Gehl-- SL3310, SL3410, SL3725, SL3825, SL4525, SL4625 Hydra-Mac-- 1300, 1600, 1700D JCB-- 165Robot, 165Robot Ser II
D 31A-17 7972 $18.82 Massey-Ferguson-- MF30E
D 31E-17 D 31E-18 D 31P-16
7976 7977 7980
$19.21 $21.16 $16.62
Mahto-- LS70, LS75, L933 Mustang-- 920, 920E, 921, 930A, 930AE, 940, 940E, 910, 911, 2040 New Holland-- 1220, 1320, 1620, 1920, 2120, 3415, 3930, L250, L255, L465, LX465, LX485, L565, LX565, LX665
D 31P-17 D 31P-17B D 58E-1 D 58P-1 D 65E-6 D 65E-7, E-8 D 65P-6
7981 7981E 8003
8003H 8070 8072 8080
$19.61 $20.32 $39.28 $45.85 $43.68 $51.24 $46.62
Code
Ramrod-- 230B, 300B, 584B, 784B, 550, 750, 1350, 1550 Thomas-- T-82, T-83, T-83S, T-103, T-132, T-133, T-133S Trak-- 1300HD, 1300C, 1300CX, 1500C
Model Awith loader or dozer Bauger, w/ or w/o loader or dozer Cbackhoe, w/ or w/o loader or dozer
Rate $10.86 $11.17 $12.33
D 65P-7 / D 65P-8 8082 $54.98 OVER 37.3 kW (50 HP) [ >50 ]
D 68P-1 D 68E-1 D 83E-1
8083 8085 8087
$61.32 $55.70 $72.72
Including, but not limited to the following: Bobcat-- 853, 863, 873, 943, 953, 980 Case-- 1845C Deere-- 5300, 5400, 6200, 6300, 6400, 8875
D 83P-1 D 85P-18 D 85A-18
8088 8090 8114
$74.21 $78.74 $60.01
Ford-- L783, L785, 250C, 260C Gehl-- SL5625, SL6625, SL6635 Hydra-Mac-- 1850, 2650, 2650D JCB-- 185Robot
D 85E-12 D 85E-18 D 135A-1
8120 8140 8150
$50.30 $71.18 $90.90
Massey-Ferguson-- MF40E, MF50EX Mustang-- 960, 2060 New Holland-- 4630, 5030, 5640, 6640, 7740, 7840, 8240, 8340, L865, LX865, LX885, 345D, 545D
D 155A-1 D 155A-2 D 375A-1 D 375A-2 D 455A-1 D 475A-2
8160 8161 8175 8176 8180 8186
$108.09 $107.52 $171.82 $203.49 $211.53 $325.74
Code Rate
Ramrod-- 1750, 1950 Thomas-- T-173HL, T-173HLS, T173HLS II, T-203HD, T-233HD Trak-- 1700HD, 1700C, 1700CX, 1700XHP
Model A $15.61with loader or dozer B $15.97auger, w/ or w/o loader or dozer C $17.18backhoe, w/ or w/o loader or dozer
29
(6) FLAG/SIGN STAND [ 6FSS ] TRAFFIC CONTROL & SAFETY DEVICES [ TRAFA ]
Model Code Rate(HOURLY RATES)
DELAY FACTOR = 0.44 OVERTIME FACTOR = 0.60 incl sign, stand & 3 flags EACH $1.95
(7) DELINEATOR DRUM [ 7DDR ]CHANGEABLE MESSAGE [ CMSN ] SIGN Model Code Rate Model Code Rate
Del. drum w/ base per 100 100 $43.04Generator GEN1 $9.50 Generator w/ cell remote GEN2 $10.48
TRAILERS, EQUIPMENT, LOW BED [ TRAIL ]Solar SOL1 $7.61 Solar w/ cell remote SOL2 $8.59
DELAY FACTOR = 0.48 OVERTIME FACTOR = 0.56 FLASHING ARROW SIGN [ FLAS ] Includes all attachments and accessories related to hauling. The rates cover Including supplies, replacements and servicing. drop deck type with and without folding/removable gooseneck or oscillating
trunion. Pilot vehicles are extra. Listed in accordance with number of axlesModel Code Rate and tires per axle. Includes jeeps, booster axles, and dollies. All loads shall Roof mounted RM $0.67 be hauled legally or within Caltrans Permit Policy. Trailer mounted TM $1.92 LOW BED A [ LB-A ]
2 axle TRAFFIC CONTROL & SAFETY DEVICES [ TRAFC ]
Model Code Rate(DAILY RATES) 4 Tires per axle 100 $11.26
DELAY FACTOR = 0.74 OVERTIME FACTOR = 1.00 8 Tires per axle 200 $14.20 Includes supplies and servicing. The following allowance is entered on the extra work by using days instead of hours worked. Crash cushion barrels and LOW BED B [ LB-B ] K-rail sections are now listed with Non-Operated items[NONOP]. 3 axle
(1) BARRICADES [ 1BAR ] Model Code Rate (A) 750 mm to 900 mm high & 600 mm to 900 mm wide (30 to 36 inches high 4 Tires per axle 300 $15.09 & 24 to 36 inches wide) 8 Tires per axle 400 $17.48(B) 1500 mm high by 1200 mm wide min. (60" high by 48" wide min.)
LOW BED C [ LB-C ]Model Code Rate 4 axleeach with flasher A1 $0.34
each without flasher A2 $0.18 Model Code Rate each B3 $0.76 4 Tires per axle 500 $24.29
8 Tires per axle 600 $30.16(2) TRAFFIC CONES [ 2TC ] Lost or destroyed are no longer paid on invoice. LOW BED D [ LB-D ]
6 axleModel Code Rate 450 mm (18") high, per 100 A100 $6.10 Model Code Rate 700 mm (28") high, per 100 B100 $10.65 8 Tires per axle 700 $48.26
700 mm (28") high w/ refl sleeve, per D100 $16.38 100 TRAILERS, EQUIPMENT, TILT BED [ TRAIT ] 1,050 mm (42") high w/ refl sleeve, per E100 $27.25 100 DELAY FACTOR = 0.48 OVERTIME FACTOR = 0.56
(3) PORTABLE DELINEATOR [ 3DEL ] Includes all attachments and accessories related to hauling. Pilot vehicles are extra. Listed in accordance with the Mfr's rated capacity in tonnes(tons).Lost or destroyed are no longer paid on invoice. TILT BED 1 AXLE [ TB-1 ]Model Code Rate
per 100 100 $17.48 OVER TO Code Rate (4) ILLUMINATED SIGNS [ 4SIG ]
0 1.8 (2) 00-02 $0.60 Model Code Rate 1.8 (2) 3.6 (4) 02-04 $0.65
TILT BED 2 AXLES [ TB-2 ]incl 900 mm x900 mm (3'x3') sign & 12V $4.20 batteries OVER TO Code Rate (5) FLASHING BEACON [ 5BEA ]
3.6 (4) 5.4 (6) 04-06 $1.07 Model Code Rate 7.3 (8) 9.1 (10) 08-10 $3.32
9.1 (10) 10.9 (12) 10-12 $3.82portable 12 volt 12V $4.29
30
10.9 (12) 12.7 (14) 12-14 $4.30 12.7 (14) 14.5 (16) 14-16 $4.78 14.5 (16) 16.3 (18) 16-18 $4.62 16.3 (18) 18.1 (20) 18-20 $4.47 18.1 (20) 20.0 (22) 20-22 $5.11 20.0 (22) 22.7 (25) 22-25 $4.98
TRENCHING MACHINES TRENC[ ]
DELAY FACTOR = 0.24 OVERTIME FACTOR = 0.79 Includes all attachments and accessories. When used, tungsten carbide tips shall be replaced by separate invoice.
BOBCAT BCAT[ ]
Model Code Rate
T 116 2000 $5.93 T 135 2010 $14.12 T 136 2020 $14.46 T 208 2030 $3.21 3022 2040 $14.94
CASE [ CASE ]
Model Code Rate
TL 70 9051 $2.38 TL 100 9053 $3.46 TL 120 9055 $4.21 TL 200 9070 $4.38 16+4 9120 $7.02 25+4 9170 $9.79 25 + 4 XP 9171 $12.38 30+4 standard 9224 $14.36 DH 4 9255 $18.06 DH 4B 9256 $19.91 DH 5 9257 $20.00 DH 5 QUAD 9259 $22.37 DH 7 9261 $23.40 360 9263 $14.02 ROAD RUNNER 380 9277 $18.64 TF 300 9374 $10.24 TF 700 9398 $11.74 TF 800 9405 $15.33 TF 1000 9460 $20.90 760 9465 $22.84
DITCH WITCH [ D-W ]
Model Code Rate
R 30 5390 $11.92 R 36D 5400 $13.82 R 40 5432 $16.39 R 65 5556 $16.44 R 100 5565 $52.65 V 30 5618 $10.70 1410 5620 $4.55 1420 5625 $5.26
1500 5630 $3.33 1620 5635 $6.71 1810 5640 $7.08 2020 5645 $9.88 2200 5650 $8.86 2300 5660 $12.98 2310 5662 $13.39 3210 5670 $15.70 3210 Combo 5675 $16.59 3500 5676 $18.71 4010 5677 $21.94 4010 Combo 5678 $20.03 5010 5679 $18.65 6510 5680 $23.75 6510 Combo 5685 $27.04
MIDMARK MDMK[ ]
Model Code Rate
300 A 7945 $11.77 321 7950 $13.11 400 A 7955 $15.67 440 7960 $20.93
VERMEER VERM[ ]
Model Code Rate
M 220 8380 $7.84 M 455 / M455A 8480 $24.38 M 475 8570 $26.72 M 475A 8571 $28.20 M 485 8580 $31.66 M 495 8585 $46.26 T 300B, T 300A 8718 $13.11 T 400C, T 400B, T 400A 8781 $35.52 T 600D, C, B, A 8842 $52.38 T 650 8843 $92.64 T 800B, T 800A, T800 8870 $85.52 T 800C 8871 $92.56 T 850 8875 $164.78 V 430 8950 $15.48 V 430A 8951 $17.87 V 434 / M 434 9000 $14.87 V 440 9015 $18.09 V 450 9017 $23.49 V 454 9020 $19.16 V 1550 9025 $7.65
31
TRUCK, TRUCK TRAILERS, EXCL. DUMP [ TRUCK ] TRUCKS & EQPT TRAIL
DELAY FACTOR = 0.24 OVERTIME FACTOR = 0.78 Includes all attachments and accessories related to hauling, with and without trailers as needed. Includes water trucks, freight trucks and passenger vehicles, including 4wd option. Listed by Mfr's Gross Vehicle Weight in Kilograms(pounds). For tractor-trailer units, the gross vehicle weight of the cargo carrying unit or units will control. In the case of water trucks, the tank capacity expressed in kilograms (pounds) of water plus 20%, will determine the gross vehicle weight. For attachment allowance, see attachment class.
TRUCKS [ T&TT ]
OVER TO Code Rate
Cars, trucks 680 kg (3/4 T) & lighter 00-06 $9.60 2727 (6000) 5443 (12000) No small 06-12 $11.76 pickups 5443 (12000) 9072 (20000) 12-20 $14.83 9072 (20000) 12701(28000) 20-28 $16.55 12701 (28000) 16330 (36000) 28-36 $22.53 16330 (36000) 21773 (48000) 36-48 $26.52 21773 (48000) 27216 (60000) 48-60 $31.78 27216(60000) & Over 60 $39.98
TRUCKS, OFF-HIGHWAY [ TRUOF ]
DELAY FACTOR = 0.37 OVERTIME FACTOR = 0.65 Includes all attachments and accessories. Includes end dump, belly dump and earthmover types. Listed in accordance with Mfr's rated capacity in tonnes (tons). In the case of earthmover types, rated by Mfr's volumetric capacity, a factor of 1.4 tonnes per cubic meter (1-1/2 tons per cubic yard) of struck capacity shall be used.
TRUCK OFF-HIGHWAY [ TRU ]
OVER TO Code Rate
9.1 (10) 13.6 (15) 10-15 $25.24 16.3 (18) 20.0 (22) 18-22 $46.46 20.0 (22) 24.5 (27) 22-27 $57.31 24.5 (27) 29.0 (32) 27-32 $66.01 29.0 (32) 36.3 (40) 32-40 $87.94 36.3 (40) 49.9 (55) 40-55 $125.71 49.9 (55) 60.8 (67) 55-67 $142.15
TRUCKS, DUMP, ON-HIGHWAY [ TRUON ]
DELAY FACTOR = 0.30 OVERTIME FACTOR = 0.72 Includes all end dump, side dump and belly dump types; including all attachments and accessories.
TRUCK ON-HIGHWAY [ TRUN ]
Model Code Rate
2 axles 3 axles 4 axles 5 axles
2AXL 3AXL 4AXL 5AXL
$17.57 $28.39 $33.29 $35.85
WELDING EQUIPMENT [ WELD ]
DELAY FACTOR = 0.28 OVERTIME FACTOR = 0.75
ARC WELDING MACHINES [ AWM ] Diesel, gas or electric powered. Includes helmets, holders, cable and all attachments and accessories. Rate capacity in amps.
OVER TO Code Rate 0 250 0-250 $2.72 250 500 250-500 $5.14 over 500 500 $5.74
GAS WELDING OUTFIT [ GWO ] Includes regulator, 7.6 meters (25 feet) of hose, torch, goggles, lighter and attachments and accessories. Gas and rod shall be paid separately.
Model Code Rate ALL ALL $0.21
32