6180 HMC

4400Star-Lifter

green line Material Handling Machine54,000 lbs.

132 HPC Series

6180 HMC

4400Star-Lifter

2

• 4 cylinder, water cooled, Tier III, QSB 4.5 Cummins diesel engine

• Output as per DIN/ISO: 132 HP at 2200 rpm (97 kW/2000min-1)

• Radiator fan is hydraulically driven and is reversible to clean out debris from radiator

• Equipped with engine intercooler• Dry air filter with cyclone prefilter, safety

element and pollution indicator

• Fuel tank capacity: 80 gallons• Electrical system:

24 volt, 2 x 12 volt high performance batteries

• Computer free load-sensing hydraulic system with energy saving flow on demand control and pressure cut off function

• All working functions can be operated simultaneously and be individually controlled very precisely due to the independent and proportional split of the oil feed from the variable displacement pump

• Hydraulic system designed for low pressure losses and heat generation by large diameter piping and hoses as well as large control valves

• Pilot operated joy sticks control all working and auxiliary functions

• Flow rate 1 x 82 gpm• Working pressure 5076 psi• Hydraulic tank capacity 66 gallons

• Special ultra fine filtration system (99.95% efficiency at 2 micron) designed to protect the hydraulic system, extending the life of all components and reducing the down time of the machine as well as the maintenance and repair costs

• Full flow return oil filters with extended change intervals

• Oversized hydraulic oil cooler, mounted completely separated from the water radiator, maintaining the oil temperature at an ideal level. The fan is hydraulically driven and thermostatically controlled

• Centralized pressure test ports, easily accessible from ground level, mounted and well protected on the left side of the machine, enable fast trouble shooting of all machine functions without any electronic support

• 10 kW Baldor generator with a Hubbell controller, belt driven for easy operation and maintenance

• 0.5 and 0.75 cu. yd. scrap grapple with rotation, 4 or 5 tine, open, semi-closed or closed, depending on the weight of the grapple and operating reach

• Log grapple available in different sizes and configurations depending on material being handled

• Contact Sennebogen for approval of the attachment before operating the machine

• Always refer to the lifting capacities on the chart before installing any attachment

• Basic 821 M with 4 point outriggers, material handling boom 21', stick 15'9" and scrap grapple 0.75 cu. yd.

Approximate weight 54,000 lbs.Given weights may vary with different equipment

• Comfortable F2000 operator’s cab resiliently mounted

• Sound absorbing insulation• Roomy compartment with excellent

all-round visibility• All weather design with tinted safety glass• Door window as sliding window• Windshield can be pushed up under cab roof• Large skylight• Windshield wiper/washer on both windshield

and skylight• Sun visor• Large capacity storage bin• Ergonomically designed, air suspension and

heated seat with adjustable armrests and lumbar support

• Well laid out instrument panel with ergonomically shaped joy sticks

• Adjustable steering column• Infinitely variable cab heating system, outside

air and circulating air stages with particle filter• Five adjustable air vents for optimum

work environment• New Sennebogen Diagnostic System (SDS) for

monitoring all essential machine and engine functions with visual and audible warning system

• 12 and 24 volt power supply• Air conditioning• AM/FM radio with CD player

• Axial piston motor, spring-loaded hydraulically releasable multiple disk brake, planetary gear and pinion shaft

• Large dimensioned swing bearing• Swing speed: 0 - 8 rpm, infinitely controllable• Hydraulic motor with integrated hydraulic brake

valves keep wear and tear of braking system to a minimum

• Undercarriage welded as rigid, torsion- free box-type design

• 4-point outriggers• Lockable storage compartment• Tires: 8 x 10.00-20 solid rubber tires with

intermediate protector ringOption:• 8 pneumatic tires 10.00-20

• All wheel drive via variable hydraulic motor with directly mounted automatic brake valve and 2-stage powershift gear

• 2-circuit servo brake system with additional safety brake as parking brake

• Special design, heavy duty, extra wide, 36 t axles

• Steering axle as hydraulically controllable oscillating axle

• Oscillating axle cylinders with safety check valves

• 0 - 3.4 mph off road• 0 - 12.5 mph on road

• Torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision machined

• Steel bushings for the boom pivot• Low noise emission

• Box-type design with large dimensioned sealed bearings for long working-life

• Grapple open-close and rotate circuits installed on the machine

• Working cylinders with hydraulic end position damping

• Optimized design for high lifting capacities• Equipped standard with safety check valves

(load holding valves) for boom and stick cylinders

• The 821 M C Series material handling equipment has been specially designed for the increased demands of high-performance operation, increased productivity and output

Specifications

Engine

Hydraulic System

Undercarriage

Uppercarriage

■ Working radius up to 44'■ No computers required to control hydraulic system■ Ultra fine hydraulic oil filtration system reduces

maintenance cost and down time of machine

■ Central lubrication system standard■ State-of-the-art load-sensing hydraulic system■ Powerful maintenance-friendly design■ Low noise emission

Working Equipment

Magnet System

Grapple

Operating Weight

Operator’s Cab

Certification according to regulations

Subject to technical modification

Swing System

6180 HMC

4400Star-Lifter

3

821 M■ Undercarriage: MP21, 4-point outriggers,

tires 8 x 10.00-20■ Boom: 21'■ Stick: 15'9"■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 18'5"

Load chartNotes:Lifting capacities are stated in pounds. Indicated loads are based on ISO 10567 and do not exceed 75% of tipping and 87% of hydraulic capacity.Machine on firm, level support ing surface. Loads valid for 360° on outriggers supported.Loads in [ . . . ] are valid 360° free on wheels.Lifting capacities do not include working attachments such as scrap grapples, magnets, etc. Their weights must be deducted from the numbers indicated in the lifting charts.

8,590

10,360

[9,700]

8,370

[6,830]

11,240

[9,470]

10,140

[6,830]

7,270

[5,070]

12,560

[9,470]

11,240

[6,610]

9,250

[5,070]

13,880

[9,030]

14,550

[13,660]

11,460

[6,390]

9,250

[4,850]

6,610

[3,740]

14,770

[8,370]

19,620

[12,780]

30,200

[23,140]

11,680

[6,170]

9,030

[4,620]

7,270

[3,740]

14,990

[7,930]

20,720

[11,680]

11,680

[5,950]

9,030

[4,620]

14,550

[7,490]

14,100

[10,800]

3,520 11,240

[5,510]

12,780

[7,270]

9,700

[5,510]

8,810

[4,400]

7,270

[3,520]

FeetMeters

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

0 5 10 15 20 25 30 35 40 45Feet

Meters

- 3

- 2

- 4

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

0

5

10

15

20

25

30

35

40

-10

-5

[11062003102937]11062003085607 machine shown in mirror image

K11

6180 HMC

4400Star-Lifter

4

821 M■ Undercarriage: MP21, 4-point outriggers,

tires 8 x 10.00-20■ Boom: 21' banana type■ Stick: 13'9" with reversing mechanism■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 18'5"

821 C. M. KA 6.4 ST 4.2 ULM

Tabell e N r.: ULM freistehen] KA gebogen ...II.26022004080659

Bearbeite r: kalue

]atum : 26. 2. 2004

FeetMeters

10,800

[8,810]

7,050

[5,730]

11,680

[8,810]

10,140

[5,950]

12,120

[8,370]

10,140

[5,730]

8,810

[3,960]

12,780

[7,930]

16,530

[12,560]

10,580

[5,510]

8,810

[3,960]

13,660

[7,270]

18,510

[11,460]

11,020

[5,070]

8,590

[3,740]

14,320

[6,830]

19,840

[10,140]

11,020

[4,850]

8,590

[3,520]

14,100

[6,390]

11,460

[9,470]

10,800

[4,400]

8,370

[3,300]

12,560

[5,950]

11,240

[9,250]

9,700

[4,400]

7,270

[3,300]

6,170

[2,640]

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

0 5 10 15 20 25 30 35 40 45Feet

Meters

- 3

- 2

- 4

- 1

0

1

2

3

4

5

6

7

8

9

10

11

13

12

0

5

10

15

20

25

30

35

45

40

-10

-5

03112003125542 [26022004080659]

With disassemled reversing mechanism, the rated loads have to be raised by approximately 550 lbs.

machine shown in mirror image

B11 ULM

6180 HMC

4400Star-Lifter

5

821 M■ Undercarriage: MP21, 4-point outriggers,

tires 8 x 10.00-20■ Boom: 23'4"■ Stick: 16'9"■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 18'5"

9,700 7,490

9,470 7,490

[6,610]

10,140

[9,920]

9,250

[6,830]

6,830

[4,850]

11,020

[9,700]

10,360

[6,830]

8,810

[4,850]

5,290

[3,520]

12,340

[9,250]

10,580

[6,610]

9,030

[4,850]

7,270

[3,520]

13,440

[8,810]

14,770

[13,660]

11,240 11,020

[6,170]

9,030

[4,620]

7,050

[3,520]

14,100

[7,930]

19,180

[12,120]

11,020

[5,730]

8,810

[4,400]

7,050

[3,300]

14,320

[7,270]

16,090

[10,580]

11,020

[5,290]

8,590

[4,180]

6,830

[3,300]

13,440

[6,830]

8,150 10,360

[5,070]

8,150

[3,960]

11,680

[6,390]

9,250

[4,850]

7,050

[3,740]

6,390

[3,080]

6,170

[2,640]

4,850

[2,640]

FeetMeters

0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 1614

0 5 10 15 20 25 30 35 40 5045Feet

Meters

- 3

- 2

- 4

- 1

0

1

2

3

4

5

6

7

8

9

10

11

13

12

0

5

10

15

20

25

30

35

45

40

-10

-5

[11062003140257]11062003131229

K12

machine shown in mirror image

6180 HMC

4400Star-Lifter

11,900

13,440 11,460

[9,470]

14,550

[14,320]

13,660

[9,470]

10,360

[6,830]

17,410

[13,880]

14,990

[9,250]

12,340

[6,610]

20,720

[13,220]

30,860

[24,030]

15,650

[8,810]

12,120

[6,390]

8,590

[5,070]

21,820

[12,340]

10,140 15,870

[8,370]

11,900

[6,170]

20,720

[11,900]

7,270 14,990

[8,150]

11,240

[6,170]

9,030

[4,850]

25'2

"

FeetMeters

0 1 2 3 4 5 6 7 8 9 10 11 12

0 5 10 15 20 25 30 35Feet

Meters

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

0

5

10

15

20

25

30

35

-10

-5

6

[11062003123733]11062003110926

821 M■ Undercarriage: MP21, 4-point outriggers,

tires 8 x 10.00-20■ Boom: 17'9"■ Stick: 13'1"■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 18'5"

K9

machine shown in mirror image

6180 HMC

4400Star-Lifter

14'4"

4'

7'6"

8'6"

15'6"

1' 1'2"

10'5

"

8'2"

11'6"

8'4"

12'10"

18'1

1"

8'6"

10'5

"

Machine Specifications

■ 821 M with 8'6" hydraulic elevating Cab Type C 270■ 821 M available with optional hi-rise cab – height 3'3", 4'11" and 6'7".

Hydraulic tilting mechanism is standard on all hi-rise cabs

14'4"

4'

7'6"

8'6"

15'6"

1' 1'2"

10'5

"8'2"

11'6"

8'4"

12'10"18

'11"

8'6"

10'5

"

7

Shipping Specifications

11'6"

31'11"

30'6"

10'1

0"

Depending upon tolerances, measurements may vary.

10'6"

29'9"

821 M with Boom 21' and Stick 15'9" 821 M with banana Boom 21' and special Stick 13'9" with reversing mechanism

821 M with Boom 23'4" and Stick 16'9" 821 M with Boom 17'9" and Stick 13'1"

26'8"

10'5

"

6180 HMC

4400Star-Lifter

821

M-C

-US

A-0

211-

2

www.sennebogen-na.com

Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations shown may include optional equipment.

SENNEBOGEN LLC1957 Sennebogen TrailStanley, NC 28164Tel: 704-347-4910Fax: 704-347-8894E-Mail: sales@sennebogen-na.com

Left side compartment holds key components■ Diesel tank■ Electrical box with all fuses and relays for easy access

and centralized electrical maintenance■ Central lubrication system■ Centralized pressure test ports for trouble shooting

of all working functions

Serviceability■ The C Series machines offer a coarse particle separator

at the front of engine cooler and air filter■ Ease of access for air filter and battery maintenance■ Hydraulic oil cooler separated from radiator, mounted on

the left side towards the back of the machine, hydraulically driven and easy to clean

■ The radiator fan is reversible and controlled from the cab, allowing the driver to clean out any debris from the radiator compartment

Comfortable F2000 operator’s cab■ Advanced design, clear layout■ Low noise and vibration■ Excellent all-round visibility■ Fully adjustable air suspension seat, heated■ Heating and air conditioning with fresh / recirculation

airflow and air filter■ Adjustable steering column

Large engine compartment■ Powerful water-cooled Cummins diesel engine

longitudinally mounted for ease of access■ Daily service conveniently and easily performed

from ground level■ Large access door with gas shocks provide easy

access to engine compartment