Standards Online Library accessible through … Catalogue Dec 2015.pdf · AS/NZS 1170.2 Supplement...
27
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted. Last updated: December 2015 STANDARD REFERENCE STANDARD TITLE SAA/SNZ HB 1:1994 Technical drawing for students AS/NZS 1056.4:1997 Storage water heaters - Daily energy consumption calculations for electric types AS/NZS 1080.1:2012 Timber - Methods of test - Method 1: Moisture content AS/NZS ISO 10984.1:2015 Timber structures - Dowel-type fasteners - Part 1: Determination of yield moment AS/NZS ISO 10984.2:2015 Timber structures - Dowel-type fasteners - Part 2: Determination of embedding strength NZS/AS 1100.301 Supplement 1:1986 Technical drawing - Architectural drawing - Architectural drawings NZS/AS 1100.301:1985 Technical drawing - Architectural drawing AS/NZS 1100.501:2002 Technical drawing - Structural engineering drawing AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords SAA/SNZ HB 114:1998 Guidelines for design of eaves and box gutters AS/NZS 1148:2001 Timber - Nomenclature - Australian, New Zealand and imported species AS/NZS 1163:2009 Cold-formed structural steel hollow sections AS/NZS 1170.0 Supplement 1:2002 Structural design actions - Part 0: General principles - Commentary AS/NZS 1170.0:2002 Structural design actions - Part 0: General principles AS/NZS 1170.1 Supplement 1:2002 Structural design actions - Part 1: Permanent, imposed and other actions - Commentary (Supplement to AS/NZS AS/NZS 1170.1:2002 Structural design actions - Part 1: Permanent, imposed and other actions AS/NZS 1170.2 Supplement 1:2002 Structural design actions - Part 2: Wind actions - Commentary (Supplement to AS/NZS 1170.2:2002) AS/NZS 1170.2:2011 Structural design actions - Part 2: Wind actions AS/NZS 1170.3 Supplement 1:2003 Structural design actions - Part 3: Snow and ice actions - Commentary (Supplement to AS/NZS 1170.3:2003) AS/NZS 1170.3:2003 Structural design actions - Part 3: Snow and ice actions NZS 1170.5 Supplement 1:2004 Structural design actions - Part 5: Earthquake actions - New Zealand Commentary NZS 1170.5:2004 Structural design actions - Part 5:Â Earthquake actions - New Zealand AS/NZS 1221:1997 Fire hose reels AS/NZS 1229:2002 Laundry troughs and tubs AS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineering AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application AS/NZS 1314:2003 Prestressing anchorages AS/NZS 1328.1:1998 Glued laminated structural timber - Performance requirements and minimum production requirements AS/NZS 1328.2:1998 Glued laminated structural timber - Guidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued laminated structural timber Standards Online Library accessible through www.masterspec.co.nz
Transcript of Standards Online Library accessible through … Catalogue Dec 2015.pdf · AS/NZS 1170.2 Supplement...
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
Last updated: December 2015
STANDARD REFERENCE STANDARD TITLESAA/SNZ HB 1:1994 Technical drawing for studentsAS/NZS 1056.4:1997 Storage water heaters - Daily energy consumption calculations for electric typesAS/NZS 1080.1:2012 Timber - Methods of test - Method 1: Moisture contentAS/NZS ISO 10984.1:2015 Timber structures - Dowel-type fasteners - Part 1: Determination of yield momentAS/NZS ISO 10984.2:2015 Timber structures - Dowel-type fasteners - Part 2: Determination of embedding strengthNZS/AS 1100.301 Supplement 1:1986 Technical drawing - Architectural drawing - Architectural drawingsNZS/AS 1100.301:1985 Technical drawing - Architectural drawingAS/NZS 1100.501:2002 Technical drawing - Structural engineering drawingAS/NZS 1125:2001 Conductors in insulated electric cables and flexible cordsSAA/SNZ HB 114:1998 Guidelines for design of eaves and box guttersAS/NZS 1148:2001 Timber - Nomenclature - Australian, New Zealand and imported speciesAS/NZS 1163:2009 Cold-formed structural steel hollow sectionsAS/NZS 1170.0 Supplement 1:2002 Structural design actions - Part 0: General principles - CommentaryAS/NZS 1170.0:2002 Structural design actions - Part 0: General principlesAS/NZS 1170.1 Supplement 1:2002 Structural design actions - Part 1: Permanent, imposed and other actions - Commentary (Supplement to AS/NZS AS/NZS 1170.1:2002 Structural design actions - Part 1: Permanent, imposed and other actionsAS/NZS 1170.2 Supplement 1:2002 Structural design actions - Part 2: Wind actions - Commentary (Supplement to AS/NZS 1170.2:2002)AS/NZS 1170.2:2011 Structural design actions - Part 2: Wind actionsAS/NZS 1170.3 Supplement 1:2003 Structural design actions - Part 3: Snow and ice actions - Commentary (Supplement to AS/NZS 1170.3:2003)AS/NZS 1170.3:2003 Structural design actions - Part 3: Snow and ice actionsNZS 1170.5 Supplement 1:2004 Structural design actions - Part 5: Earthquake actions - New Zealand CommentaryNZS 1170.5:2004 Structural design actions - Part 5:Â Earthquake actions - New ZealandAS/NZS 1221:1997 Fire hose reelsAS/NZS 1229:2002 Laundry troughs and tubsAS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineeringAS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applicationsAS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent applicationAS/NZS 1314:2003 Prestressing anchoragesAS/NZS 1328.1:1998 Glued laminated structural timber - Performance requirements and minimum production requirements
AS/NZS 1328.2:1998Glued laminated structural timber - Guidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued laminated structural timber
Standards Online Library accessible through www.masterspec.co.nz
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS/BS 1387:1985Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
AS/NZS 1388:1994 Guidelines for technical information for building and construction products
AS/NZS 1428.4.1:2009Design for access and mobility - Part 4.1: Means to assist the orientation of people with vision impairment - Tactile ground surface indicators
AS/NZS 1477:2006 PVC pipes and fittings for pressure applicationsAS/NZS 1491:1996 Finger jointed structural timberAS/NZS CISPR 15:2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar AS/NZS ISO/IEC 15018:2005 Information technology - Generic cabling for homesAS/NZS 1516:1994 The cement mortar lining of pipelines in situNZS/AS 1530.1:1994 Methods for fire tests on building materials, components and structures - Combustibility test for materialsNZS/AS 1530.2:1993 Methods for fire tests on building materials, components and structures - Test for flammability of materials
AS/NZS 1530.3:1999Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release
AS/NZS 1530.7:1998Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies - Ambient and medium temperature leakage test procedure
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units - Septic tanksAS/NZS 1546.2:2008 On-site domestic wastewater treatment units - Waterless composting toiletsAS/NZS 1546.3:2008 On-site domestic wastewater treatment units - Aerated wastewater treatment systemsAS/NZS 1547:2012 On-site domestic wastewater managementAS/NZS 1554.1:2014 Structural steel welding - Part 1: Welding of steel structuresAS/NZS 1554.2:2003 Structural steel welding - Stud welding (steel studs to steel)AS/NZS 1554.3:2014 Structural steel welding - Part 3: Welding of reinforcing steelAS/NZS 1554.4:2014 Structural steel welding -Â Part 4: Welding of high strength quenched and tempered steelsAS/NZS 1554.5:2014 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loadingAS/NZS 1554.6:2012 Structural steel welding - Part 6: Welding stainless steels for structural purposesAS/NZS 1554.7:2014 Structural steel welding - Part 7: Welding of sheet steel structuresAS/NZS 1559:1997 Hot-dip galvanized steel bolts with associated nuts and washers for tower constructionAS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding - Corrugated fibre-reinforced cementAS/NZS 1562.3:1996 Design and installation of sheet roof and wall cladding - PlasticAS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sectionsAS/NZS 1576.1:2010 Scaffolding - Part 1: General requirementsAS/NZS 1576.2:2009 Scaffolding - Couplers and accessoriesAS/NZS 1576.3:2015 Scaffolding - Part 3: Prefabricated and tube-and-coupler scaffoldingAS/NZS 1576.4:2013 Scaffolding - Part 4: Suspended scaffoldingAS/NZS 1576.5:1995 Scaffolding - Prefabricated splitheads and trestlesAS/NZS 1576.6:2000 Scaffolding - Metal tube-and-coupler scaffolding - Deemed to comply with AS/NZS 1576.3AS/NZS 1577:2013 Scaffold decking components
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 1580.108.1:1994 Methods of test for paints and related materials - Determination of dry film thickness on metallic substrates - AS/NZS 1596:2014 The storage and handling of LP GasAS/NZS 1604.2:2012 Specification for preservative treatment - Part 2: Reconstituted wood-based productsAS/NZS 1604.3:2012 Specification for preservative treatment - Part 3: PlywoodAS/NZS 1604.4:2012 Specification for preservative treatment - Part 4: Laminated veneer lumber (LVL)AS/NZS 1604.5:2012 Specification for preservative treatment - Part 5: Glued laminated timber products
AS/NZS 1605.1:2006Methods for sampling and analysing timber preservatives and preservative-treated timber - General requirements, sampling, and determination of sapwood and heartwood presence
AS/NZS 1605.2:2006Methods for sampling and analysing timber preservatives and preservative-treated timber - Determination of preservative penetration by spot tests
AS/NZS 1605.3:2006Methods for sampling and analysing timber preservatives and preservative-treated timber - Analysis methods for determination of preservative retention
AS/NZS 1605.4:2006Methods for sampling and analysing timber preservatives and preservative-treated timber - Analysis methods for determination of preservative solution concentration
NZS/AS 1657:1992 Fixed platforms, walkways, stairways and ladders. Design, construction and installation
AS/NZS 1660.5.1:2005Test methods for electric cables, cords and conductors - Fire tests - Test for vertical flame spread of vertically-mounted bunched wires or cables
AS/NZS 1660.5.2:2006Test methods for electric cables, cords and conductors - Fire tests - Measurement of smoke density of cables burning under defined conditions
AS/NZS 1660.5.3:1998Test methods for electric cables, cords and conductors - Fire tests - Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables
AS/NZS 1660.5.4:1998Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
AS/NZS 1660.5.5:2005 Test methods for electric cables, cords and conductors - Fire tests - Circuit integrityAS/NZS 1660.5.6:2005 Test methods for electric cables, cords and conductors - Fire tests - Test for vertical flame propagation for a AS/NZS 1664.1 Supplement 1:1997 Aluminium structures - Limit state design - CommentaryAS/NZS 1664.1:1997 Aluminium structures - Limit state designAS/NZS 1664.2 Supplement 1:1997 Aluminium structures - Allowable stress design - CommentaryAS/NZS 1664.2:1997 Aluminium structures - Allowable stress designAS/NZS 1665:2004 Welding of aluminium structuresAS/NZS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildingsAS/NZS 1680.0:2009 Interior lighting - Safe movementAS/NZS 1680.1:2006 Interior and workplace lighting - Part 1: General principles and recommendationsAS/NZS 1680.2.1:2008 Interior and workplace lighting - Part 2.1: Specific applications - Circulation spaces and other general areasAS/NZS 1680.2.2:2008 Interior and workplace lighting - Part 2.2: Specific applications - Office and screen-based tasksAS/NZS 1680.2.3:2008 Interior and workplace lighting - Part 2.3: Specific applications - Educational and training facilitiesAS/NZS 1680.2.4:1997 Interior lighting - Part 2.4: Industrial tasks and processesAS/NZS 1680.2.5:1997 Interior lighting - Part 2.5: Hospital and medical tasks
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 1680.4:2001 Interior lighting - Part 4: Maintenance of electric lighting systemsAS/NZS 1730:1996 WashbasinsAS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheets, coiled sheet and plateAS/NZS 1735.18.2002 Lifts, escalators and moving walks (SAA Lift Code) - Passenger lifts for private residence - Automatically AS/NZS 1748.1:2011 Timber - Solid - Stress-graded for structural purposes - General requirementsAS/NZS 1748.2:2011 Timber - Solid - Stress-graded for structural purposes - Qualification of grading methodAS/NZS 1841.1:2007 Portable fire extinguishers - General requirementsAS/NZS 1841.2:2007 Portable fire extinguishers - Specific requirements for water type extinguishersAS/NZS 1841.3:2007 Portable fire extinguishers - Specific requirements for wet chemical type extinguishersAS/NZS 1841.4:2007 Portable fire extinguishers - Specific requirements for foam type extinguishersAS/NZS 1841.5:2007 Portable fire extinguishers - Specific requirements for powder type extinguishersAS/NZS 1841.6:2007 Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishersAS/NZS 1841.7:2007 Portable fire extinguishers - Specific requirements for vaporizing liquid type extinguishersAS/NZS 1841.8:2007 Portable fire extinguishers - Specific requirements for non-rechargeable type extinguishersAS/NZS 1850:2009 Portable fire extinguishers - Classification, rating and performance testingAS/NZS 1859.1:2004 Reconstituted wood-based panels - Specifications - ParticleboardAS/NZS 1859.2:2004 Reconstituted wood-based panels - Specifications - Dry-processed fibreboardAS/NZS 1859.3:2005 Reconstituted wood-based panels - Specifications - Decorative overlaid wood panelsAS/NZS 1859.4:2004 Reconstituted wood-based panels - Specifications - Wet-processed fibreboardAS/NZS 1860.1:2002 Particleboard flooring - SpecificationsAS/NZS 1866:1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapesAS/NZS 1873.1:2003 Powder-actuated (PA) hand-held fastening tools - Selection, operation and maintenanceAS/NZS 1873.2:2003 Powder-actuated (PA) hand-held fastening tools - Design and constructionAS/NZS 1873.3:2003 Powder-actuated (PA) hand-held fastening tools - ChargesAS/NZS 1873.4:2003 Powder-actuated (PA) hand-held fastening tools - FastenersNZS AS 1884:2013 Floor coverings - Resilient sheet and tiles - Installation practicesAS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment
AS/NZS 1891.2 Supplement 1:2001Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems - Prescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001)
AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices - Part 2: Horizontal lifeline and rail systemsAS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devicesAS/NZS 1891.4:2009 Industrial fall-arrest systems and devices - Part 4: Selection, use and maintenanceAS/NZS 1905.1:1997 Components for the protection of openings in fire-resistant walls - Fire-resistant doorsetsAS/NZS 2023:1995 Baths for ablutionary purposesAS/NZS 2032:2006 Installation of PVC pipe systemsAS/NZS 2033:2008 Installation of polyethylene pipe systemsAS/NZS 2041.4:2010 Buried corrugated metal structures - Helically formed sinusoidal pipesAS/NZS 2053.1:2001 Conduits and fittings for electrical installations - General requirements
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 2053.2:2001 Conduits and fittings for electrical installations - Rigid plain conduits and fittings of insulating materialAS/NZS 2053.3:1995 Conduits and fittings for electrical installations - Rigid plain conduits and fittings of fibre-reinforced concrete AS/NZS 2053.4:1995 Conduits and fittings for electrical installations - Flexible plain conduits and fittings of insulating materialAS/NZS 2053.5:2001 Conduits and fittings for electrical installations - Corrugated conduits and fittings of insulating materialAS/NZS 2053.6:2001 Conduits and fittings for electrical installations - Profile-wall, smooth-bore conduits and fittings of insulating AS/NZS 2053.7:2002 Conduits and fittings for electrical installations - Rigid metal conduits and fittingsAS/NZS 2053.8:1995 Conduits and fittings for electrical installations - Flexible conduits and fittings of metal or composite materialAS/NZS 2097:2006 Methods for sampling veneer and plywoodAS/NZS 2098.0:2006 Methods of test for veneer and plywood - General introduction and list of methodsAS/NZS 2098.1:2006 Methods of test for veneer and plywood - Moisture content of veneer and plywoodAS/NZS 2098.11:2005 Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywoodAS/NZS 2098.2:2012 Methods of test for veneer and plywood - Method 2: Bond quality of plywood (chisel test)AS/NZS 2098.3:2006 Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywoodAS/NZS 2098.4:2006 Methods of test for veneer and plywood - Measurement of dimensions and shape for sheets of veneer and AS/NZS 2098.5:2006 Methods of test for veneer and plywood - Resistance of gluelines in plywood to attack by micro-organismsAS/NZS 2098.6:2006 Methods of test for veneer and plywood - Depth of peeler checks in veneer and plywoodAS/NZS 2098.7:2006 Methods of test for veneer and plywood - Density of veneer and plywoodAS/NZS 2098.8:2006 Methods of test for veneer and plywood - Water absorption and thickness swelling of unpainted plywoodNZS/BS 21:1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)AS/NZS 2107:2000 Acoustics - Recommended design sound levels and reverberation times for building interiors
AS/NZS 2122.2:1999Methods of test for determining combustion propagation characteristics of plastics - Determination of minimum oxygen concentration for flame propagation following top surface ignition of vertically orientated
AS/NZS 2179.1:2014Specifications for rainwater goods, accessories and fasteners - Part 1: Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS/NZS 2201.1:2007 Intruder alarm systems - Client's premises - Design, installation, commissioning and maintenanceAS/NZS 2208:1996 Safety glazing materials in buildingsAS/NZS 2243.1:2005 Safety in laboratories - Planning and operational aspectsAS/NZS 2269.0:2012 Plywood - Structural - Part 0: SpecificationsAS/NZS 2269.1:2012 Plywood - Structural - Part 1: Determination of structural properties - Test methodsAS/NZS 2269.2:2007 Plywood - Structural - Determination of structural properties - Evaluation methodsAS/NZS 2270:2006 Plywood and blockboard for interior useAS/NZS 2271:2004 Plywood and blockboard for exterior useAS/NZS 2272:2006 Plywood - MarineAS/NZS 2280:2014 Ductile iron pipes and fittingsAS/NZS 2293.2:1995 Emergency evacuation lighting for buildings - Inspection and maintenanceNZS 2295:2006 Pliable, permeable building underlaysAS/NZS 2310:2002 Glossary of paint and painting termsAS/NZS 2311:2009 Guide to the painting of buildings
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part AS/NZS 2343:1997 Bullet-resistant panels and elementsAS/NZS 2350.0:1999 Methods of testing portland and blended cements - General introduction and list of methodsAS/NZS 2350.1:2006 Methods of testing portland and blended cements - Method 1: SamplingAS/NZS 2350.11:2006 Methods of testing portland and blended cements - Method 11: Compressive strengthAS/NZS 2350.16:2006 Methods of testing portland and blended cements - Method 16: Determination of air content of masonry AS/NZS 2350.17:2006 Methods of testing portland and blended cements - Method 17: Determination of soundness of masonry AS/NZS 2350.18:2006 Methods of testing portland and blended cements - Method 18: Determination of water retention of masonry AS/NZS 2350.3:2006 Methods of testing portland and blended cements - Method 3: Normal consistencyAS/NZS 2350.4:2006 Methods of testing portland and blended cements - Method 4: Setting timeAS/NZS 2350.5:2006 Methods of testing portland and blended cements - Method 5: Determination of soundnessAS/NZS 2350.8:2006 Methods of testing portland and blended cements - Method 8: Fineness index by air permeability methodAS/NZS 2425:2015 Bar chairs in reinforced concrete - Product requirements and test methodsAS/NZS 2455.1:2007 Textile floor coverings - Installation practice - GeneralAS/NZS 2455.2:2007 Textile floor coverings - Installation practice - Carpet tilesAS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applicationsAS/NZS 2535.1:2007 Test methods for solar collectors - Thermal performance of glazed liquid heating collectors including pressure
AS/NZS 2537.1:2011Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General
AS/NZS 2537.2:2011Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 2: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings
AS/NZS 2537.3:2011Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 3: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for
AS/NZS 2537.4:2011Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 4: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the
AS/NZS 2537.5:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Fittings for mechanical jointing (including PE-X/metal transitions)
AS/NZS 2544:1995 Grey iron pressure fittingsAS/NZS 2566.1 Supplement 1:1998 Buried flexible pipelines - Structural design - Commentary (Supplement to AS/NZS 2566.1:1998)AS/NZS 2566.1:1998 Buried flexible pipelines - Structural designAS/NZS 2566.2:2002 Buried flexible pipelines - InstallationAS/NZS 2588:1998 Gypsum plasterboardAS/NZS 2589:2007 Gypsum linings - Application and finishingAS/NZS 2633:1996 Guide to the specification of coloursAS/NZS 2638.1:2011 Gate valves for waterworks purposes - Part 1: Metal seatedAS/NZS 2638.2:2011 Gate valves for waterworks purposes - Part 2: Resilient seated
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compoundsAS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applicationsAS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold AS/NZS 2699.1:2000 Built-in components for masonry construction - Wall tiesAS/NZS 2699.2:2000 Built-in components for masonry construction - Connectors and accessoriesAS/NZS 2699.3:2002 Built-in components for masonry construction - Lintels and shelf angles (durability requirements)AS/NZS 2712:2007 Solar and heat pump water heaters - Design and constructionAS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance AS/NZS 2754.1(Int):2008 Adhesives for timber and timber products - Adhesives for manufacture of plywood and laminated veneer AS/NZS 2785:2000 Suspended ceilings - Design and installationAS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirementsAS/NZS 2878:2000 Timber - Classification into strength groupsAS/NZS 2890.1:2004 Parking facilities - Off-street car parkingAS/NZS 2890.6:2009 Parking facilities - Off-street parking for people with disabilitiesAS/NZS 2904:1995 Damp-proof courses and flashingsAS/NZS 2908.1:2000 Cellulose-cement products - Corrugated sheetsAS/NZS 2908.2:2000 Cellulose-cement products - Flat sheetsAS/NZS 2918:2001 Domestic solid fuel burning appliances - InstallationAS/NZS 2924.1:1998 High pressure decorative laminates - Sheets made from thermosetting resins - Classification and specificationsAS/NZS 2924.2:1998 High pressure decorative laminates - Sheets made from thermosetting resins - Determination of propertiesAS/NZS 2982:2010 Laboratory design and constructionAS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)AS/NZS 3003:2011 Electrical installations - Patient areas
AS/NZS 3008.1.1:2009Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3008.1.2:2010 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elementsAS/NZS 3080:2013 Information technology - Generic cabling for customer premisesAS/NZS 3084:2003 Telecommunications installations - Telecommunications pathways and spaces for commercial buildingsAS/NZS 3085.1:2004 Telecommunications installations - Basic requirementsAS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipmentNZS 3101.1&2:2006 Concrete structures StandardNZS 3103:1991 Specification for sands for mortars and plastersNZS 3104:2003 Specification for concrete productionNZS 3106:1986 Code of practice for concrete structures for the storage of liquidsNZS 3106:2009 Design of concrete structures for the storage of liquidsNZS 3109:1997 Concrete constructionNZS 3111:1986 Methods of test for water and aggregate for concrete
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 3112.1:1986 Methods of test for concrete - Tests relating to fresh concreteNZS 3112.2:1986 Methods of test for concrete - Tests relating to the determination of strength of concreteNZS 3112.3:1986 Methods of test for concrete - Tests on hardened concrete other than for strengthNZS 3112.4:1986 Methods of test for concrete - Tests relating to groutAS/NZS 3112:2011 Approval and test specification - Plugs and socket-outletsAS/NZS 3113:2005 Approval and test specification - Ceiling rosesNZS 3114:1987 Specification for concrete surface finishesNZS 3116:2002 Concrete segmental and flagstone pavingNZS 3121:2015 Water and aggregate for concreteNZS 3122:2009 Specification for Portland and blended cements (General and special purpose)NZS 3123:2009 Specification for pozzolan for use with Portland and blended cementNZS 3124:1987 Specification for concrete construction for minor worksNZS 3125:1991 Specification for portland-limestone filler cementAS/NZS 3136:2001 Approval and test specification - Electrical equipment for spa and swimming poolsAS/NZS 3140:2014 Approval and test specification - Edison screw lampholdersNZS 3152:1974 Specification for the manufacture and use of structural and insulating lightweight concreteAS/NZS 3190:2011 Approval and test specification - Residual current devices (current-operated earth-leakage devices)AS/NZS 3191:2008 Electric flexible cordsSAA/SNZ HB 32:1995 Control of microbial growth in air-handling and water systems of buildingsAS/NZS 3200.2.11:1999 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Gamma AS/NZS 3200.2.13:2005 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Anaesthetic AS/NZS 3200.2.15:1994 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Capacitor AS/NZS 3200.2.2:1999 Approval and test specification - Medical electrical equipment - Particular requirements for safety - High
AS/NZS 3200.2.200:2005Approval and test specification - Medical electrical equipment - Particular requirements for safety - Oxygen concentrators for individual patient use
AS/NZS 3200.2.201:2000 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Dento-
AS/NZS 3200.2.202:1996Approval and test specification - Medical electrical equipment - Particular requirements for safety - Infant apnoea monitors for domestic use
AS/NZS 3200.2.22:1997Approval and test specification - Medical electrical equipment - Particular requirements for safety - Diagnostic and therapeutic laser equipment
AS/NZS 3200.2.23:2001Approval and test specification - Medical electrical equipment - Particular requirements for safety - Transcutaneous partial pressure monitoring equipment
AS/NZS 3200.2.24:1999 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Infusion AS/NZS 3200.2.25:1993 Approval and test specification - Medical electrical equipment - Particular requirements for safety - AS/NZS 3200.2.26:2005 Approval and test specification - Medical electrical equipment - Particular requirements for safety -
AS/NZS 3200.2.27:1996Approval and test specification - Medical electrical equipment - Particular requirements for safety - Electrocardiographic monitoring equipment
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 3200.2.30:2001Approval and test specification - Medical electrical equipment - Particular requirements for safety - Automatic cycling non-invasive blood pressure monitoring equipment
AS/NZS 3200.2.31:1996Approval and test specification - Medical electrical equipment - Particular requirements for safety - External cardiac pacemakers with internal power source
AS/NZS 3200.2.32:1994Approval and test specification - Medical electrical equipment - Particular requirements for safety - Associated equipment of X-ray equipment
AS/NZS 3200.2.33:2005Approval and test specification - Medical electrical equipment - Particular requirements for safety - Magnetic resonance equipment for medical diagnosis
AS/NZS 3200.2.34:1996Approval and test specification - Medical electrical equipment - Particular requirements for safety - Direct blood-pressure monitoring equipment
AS/NZS 3200.2.35:1999Approval and test specification - Medical electrical equipment - Particular requirements for safety - Blankets, pads and mattresses intended for heating in medical use
AS/NZS 3200.2.36:1998 Approval and test specification - Medical electrical equipment - Particular requirements for safety -
AS/NZS 3200.2.38:2007Approval and test specification - Medical electrical equipment - Particular requirements for safety - Electrically and manually operated medical beds for adult use
AS/NZS 3200.2.39:2001 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Peritoneal AS/NZS 3200.2.4:2006 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Cardiac
AS/NZS 3200.2.40:1999Approval and test specification - Medical electrical equipment - Particular requirements for safety - Electromyographs and evoked response equipment
AS/NZS 3200.2.41:2002Approval and test specification - Medical electrical equipment - Particular requirements for safety - Surgical luminaires and luminaires for diagnosis
AS/NZS 3200.2.43:2002Approval and test specification - Medical electrical equipment - Particular requirements for safety - X-ray equipment for interventional procedures
AS/NZS 3200.2.44:2005Approval and test specification - Medical electrical equipment - Particular requirements for safety - X-ray equipment for computed tomography
AS/NZS 3200.2.46:2003 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Operating AS/NZS 3200.2.5:2002 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Ultrasonic AS/NZS 3200.2.6:2005 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Microwave
AS/NZS 3200.2.7:1999Approval and test specification - Medical electrical equipment - Particular requirements for safety - High voltage generators of diagnostic X-ray generators
AS/NZS 3200.2.9:1997Approval and test specification - Medical electrical equipment - Particular requirements for safety - Patient contact dosemeters used in radiotherapy with electrically connected detectors
NZS 3404.1:2009 Looseleaf Steel structures Standard - Materials, fabrication, and constructionNZS 3404 Parts 1 and 2:1997 Steel Structures StandardAS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assembliesAS/NZS 3439.2:2002 Low-voltage switchgear and controlgear assemblies - Particular requirements for busbar trunking systems
AS/NZS 3439.3:2002Low-voltage switchgear and controlgear assemblies - Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use -
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 3439.5:2009 Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for power AS/NZS 3497:1998 Drinking water treatment units - Plumbing requirementsAS/NZS 3499:2006 Water supply - Flexible hose assembliesAS/NZS 3500.0:2003 Plumbing and drainage - Glossary of termsAS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water servicesAS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainageAS/NZS 3500.3:2015 Plumbing and drainage - Part 3: Stormwater drainageAS/NZS 3500.4:2015 Plumbing and drainage - Part 4: Heated water servicesAS/NZS 3500.5:2012 Plumbing and drainage - Part 5: Housing installationsNZS 3501:1976 Specification for copper tubes for water, gas, and sanitationNZS 3504:1979 Specification for aluminium windowsAS/NZS 3504:2006 Fire blanketsAS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applicationsAS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement - Amorphous silicaAS/NZS 3598.1:2014 Energy audits - Part 1: Commercial buildingsAS/NZS 3598.2:2014 Energy audits - Part 2: Industrial and related activitiesAS/NZS 3598.3:2014 Energy audits - Part 3: Transport related activitiesNZS 3601:1973 Metric dimensions for timberNZS/BS 3601:1987 Specification for carbon steel pipes and tubes with specified room temperature properties for pressure NZS 3602:2003 Timber and wood-based products for use in buildingNZS 3603:1993 Timber Structures StandardNZS 3604:2011 Timber-framed buildingsSNZ HB 3604:2011 Timber-framed buildings - Selected extracts from NZS 3604:2011NZS 3605:2001 Timber piles and poles for use in buildingNZS 3610:1979 Specification for profiles of mouldings and joineryNZS 3617:1979 Specification for profiles of weatherboards, fascia boards, and flooringNZS 3618:1984 Mechanical stress grading of timberNZS 3619:1979 Specification for timber windowsNZS 3622:2004 Verification of timber propertiesNZS 3631:1988 New Zealand timber grading rulesNZS 3640:2003 Chemical preservation of round and sawn timberAS/NZS 3661.2:1994 Slip resistance of pedestrian surfaces - Part 2: Guide to the reduction of slip hazardsAS/NZS 3662:2005 Performance of showers for bathingAS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial control - Part 1: Design, installation and commissioningAS/NZS 3666.2:2011 Air-handling and water systems of buildings - Microbial control - Part 2: Operation and maintenanceAS/NZS 3666.3:2011 Air-handling and water systems of buildings - Microbial control - Part 3: Performance-based maintenance of
AS/NZS 3666.4:2011Air-handling and water systems of buildings - Microbial control - Part 4: Performance-based maintenance of air-handling systems (ducts and components)
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 3678:2011 Structural steel - Hot-rolled plates, floorplates and slabsAS/NZS 3679.1:2010 Structural steel - Hot-rolled bars and sectionsAS/NZS 3679.2:2010 Structural steel - Welded I sectionsAS/NZS 3690:2009 Installation of ABS pipe systemsAS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittingsAS/NZS 3718:2005 Water supply - Tap wareAS/NZS 3725:2007 Design for installation of buried concrete pipesAS/NZS 3725 Supplement 1:2007 Design for installation of buried concrete pipes – CommentaryAS/NZS 3744.1:1998 Furniture - Assessment of the ignitability of upholstered furniture - Ignition source - Smouldering cigaretteAS/NZS 3744.2:1998 Furniture - Assessment of the ignitability of upholstered furniture - Ignition source - Match-flame equivalent
AS/NZS 3744.3:1998Furniture - Assessment of the ignitability of upholstered furniture - Ignition sources - Nominal 160 mL/min gas flame and nominal 350 mL/min gas flame
AS/NZS 3750.0:2008 Paints for steel structures - Introduction and list of StandardsAS/NZS 3750.1:2008 Paints for steel structures - Epoxy mastic (two-pack) - For rusted steelAS/NZS 3750.10:1994 Paints for steel structures - Full gloss epoxy (two-pack)AS/NZS 3750.11:2009 Paints for steel structures - Chlorinated rubber - High-build and glossAS/NZS 3750.12:1996 Paints for steel structures - Alkyd/micaceous iron oxideAS/NZS 3750.13:1997 Paints for steel structures - Epoxy primer (two pack)AS/NZS 3750.14:1997 Paints for steel structures - High-build epoxy (two-pack)AS/NZS 3750.15:1998 Paints for steel structures - Inorganic zinc silicate paintAS/NZS 3750.16:1998 Paints for steel structures - Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-AS/NZS 3750.17:1998 Paints for steel structures - Etch primers (single pack and two-pack)AS/NZS 3750.19:2008 Paints for steel structures - Metal primer - General purposeAS/NZS 3750.2:2008 Paints for steel structures - Ultra high-build paintAS/NZS 3750.20:2008 Paints for steel structures - Anticorrosive metal primer - Solvent-borne - Lead and chromate freeAS/NZS 3750.21:2008 Paints for steel structures - Undercoat - Solvent-borneAS/NZS 3750.22:2008 Paints for steel structures - Full gloss enamel - Solvent-borneAS/NZS 3750.23:2008 Paints for steel structures - Semi-gloss enamel - Solvent-borneAS/NZS 3750.3:2008 Paints for steel structures - Heat resisting - ExteriorAS/NZS 3750.4:1994 Paints for steel structures - Bitumen paintAS/NZS 3750.5:2008 Paints for steel structures - Acrylic full gloss (two-pack)AS/NZS 3750.6:2009 Paints for steel structures - Full gloss polyurethane (two-pack)AS/NZS 3750.7:2009 Paints for steel structures - Aluminium paintAS/NZS 3750.8:1994 Paints for steel structures - Vinyl paints - Primer, high-build and glossAS/NZS 3750.9:2009 Paints for steel structures - Organic zinc-rich primerAS/NZS 3809:1998 Safes and strongroomsAS/NZS 3810.0:1998 Safes and strongrooms - Methods of test - Introduction and list of methodsAS/NZS 3810.1:1998 Safes and strongrooms - Methods of test - Test for physical attack
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 3810.2:1998 Safes and strongrooms - Methods of test - Test for anchoring strengthAS/NZS 3810.3:1998 Safes and strongrooms - Methods of test - Test for explosive resistanceAS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption AS/NZS 3869:1999 Domestic solid fuel burning appliances - Design and constructionAS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittingsAS/NZS 3896:2008 Waters - Examination for Legionella spp. including Legionella pneumophilaNZS 3902:2004 Housing, alterations and small buildings contractNZS 3910:2013 Conditions of contract for building and civil engineering constructionNZS 3910:2013 PACK OF 3 NZS 3910:2013 PACK OF 3 Conditions of contract for building and civil engineering constructionNZS 3915:2005 Conditions of contract for building and civil engineering construction (where no person is appointed to act as NZS 3916:2013 Conditions of contract for building and civil engineering - Design and constructNZS 3916:2013 PACK OF 3 NZS 3916:2013 PACK OF 3 Conditions of contract for building and civil engineering - Design and constructNZS 3917:2013 Conditions of contract for building and civil engineering - Fixed termNZS 3917:2013 PACK OF 3 NZ 3917:2013 PACK OF 3 Conditions of contract for building and civil engineering - Fixed termAS/NZS 3982:1996 UrinalsAS/NZS 4012:2014 Domestic solid fuel burning appliances - Method for determination of power output and efficiencyAS/NZS 4013:2014 Domestic solid fuel burning appliances - Method for determination of flue gas emissionAS/NZS 4014.1:1999 Domestic solid fuel burning appliances - Test fuels - HardwoodAS/NZS 4014.2:1999 Domestic solid fuel burning appliances - Test fuels - SoftwoodAS/NZS 4014.3:1999 Domestic solid fuel burning appliances - Test fuels - Lignite briquettesAS/NZS 4014.4:1999 Domestic solid fuel burning appliances - Test fuels - Sub-bituminous coalAS/NZS 4014.6:2007 Domestic solid fuel burning appliances - Test fuels - Wood pelletsAS/NZS 4020:2005 Testing of products for use in contact with drinking waterAS/NZS 4040.4:1996 Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for sheet roof materialsAS/NZS 4040.5:1996 Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for wall boardsAS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)AS/NZS 4063.1:2010 Characterization of structural timber - Test methodsAS/NZS 4063.2:2010 Characterization of structural timber - Determination of characteristic valuesAS/NZS 4065:2010 Concrete utility services polesAS/NZS 4087:2011 Metallic flanges for waterworks purposesAS/NZS 4088.1:1996 Specification for burning behaviour of upholstered furniture - Upholstery materials for domestic furniture - SNZ HB 4102:2011 Safety in the homeNZS 4104:1994 Seismic restraint of building contentsNZS 4121:2001 Design for access and mobility: Buildings and associated facilitiesAS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applicationsAS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applicationsAS/NZS 4131:2010 Polyethylene (PE) compounds for pressure pipes and fittingsAS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4200.1:1994 Pliable building membranes and underlays - MaterialsAS/NZS 4200.2:1994 Pliable building membranes and underlays - Installation requirementsAS/NZS 4201.0:1994 Pliable building membranes and underlays - Methods of test - General introduction and list of methodsAS/NZS 4201.1:1994 Pliable building membranes and underlays - Methods of test - Resistance to dry delaminationAS/NZS 4201.2:1994 Pliable building membranes and underlays - Methods of test - Resistance to wet delaminationAS/NZS 4201.3:1994 Pliable building membranes and underlays - Methods of test - ShrinkageAS/NZS 4201.4:1994 Pliable building membranes and underlays - Methods of test - Resistance to water penetrationAS/NZS 4201.5:1994 Pliable building membranes and underlays - Methods of test - EmittanceAS/NZS 4201.6:1994 Pliable building membranes and underlays - Methods of test - Surface water absorbencyNZS 4202:1995 Standard method of measurement of building worksNZS 4206:1992 Concrete interlocking roofing tilesNZS 4210:2001 Masonry construction: Materials and workmanshipNZS 4211:2008 Specification for performance of windowsNZMP 4212:1998 Glossary of building terminologyNZS 4214:2006 Methods of determining the total thermal resistance of parts of buildingsNZS 4217:1980 Pressed metal tile roofsNZS 4218:2004 Energy efficiency - Small building envelopeNZS 4218:2009 Thermal insulation - Housing and small buildingsNZS 4219:2009 Seismic performance of engineering systems in buildingsNZS 4220:1982 Code of practice for energy conservation in non-residential buildingsNZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazingNZS 4223 Parts 1 and 2:1985 Code of practice for glazing in buildings - Code of practice for glazing in buildingsNZS 4223.3:1999 Glazing in buildings - Part 3: Human impact safety requirementsNZS 4223.4:2008 Glazing in buildings - Part 4: Wind, dead, snow, and live actionsNZS 4223 Supplement 1:2008 Code of practice for glazing in buildings - Supplement 1 to NZS 4223.1:2008 and NZS 4223.4:2008NZS 4229:2013 Concrete masonry buildings not requiring specific engineering designNZS 4230:2004 Design of reinforced concrete masonry structuresNZS 4232.2:1988 Performance criteria for fire resisting enclosures - Part 2: Fire resisting glazing systemsAS/NZS 4233.1:2013 High pressure water jetting systems - Part 1: Safe operation and maintenanceAS/NZS 4233.2:2013 High pressure water jetting systems - Part 2: Construction and performanceAS/NZS 4234:2008 Heated water systems - Calculation of energy consumptionSNZ HB 4236:2002 Masonry veneer wall claddingNZS 4239:1993 Automatic sliding door assembliesNZS 4241:1999 Public toiletsNZS 4243.1:2007 Energy efficiency - Large buildings - Building thermal envelopeNZS 4243.2:2007 Energy efficiency - Large buildings - LightingSNZ PAS 4244:2003 Insulation of lightweight-framed and solid-timber housesNZS 4246:2006 Energy efficiency - Installing insulation in residential buildings
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 4251.1:2007 Solid plastering - Cement plasters for walls, ceilings and soffitsNZS 4251:1974 Code of practice for solid plasteringAS/NZS 4253:1994 MailboxesAS/NZS 4256.1:1994 Plastic roof and wall cladding materials - General requirementsAS/NZS 4256.2:1994 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) building sheetsAS/NZS 4256.3:1994 Plastic roof and wall cladding materials - Glass fibre reinforced polyester (GRP)AS/NZS 4256.4:1995 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boardsAS/NZS 4256.5:1996 Plastic roof and wall cladding materials - PolycarbonateAS/NZS 4257.0:1994 Plastic roof and wall cladding materials - Methods of test - General introduction and list of methodsAS/NZS 4257.1:1994 Plastic roof and wall cladding materials - Methods of test - Determination of dimensional propertiesAS/NZS 4257.10:1997 Plastic roof and wall cladding materials - Methods of test - Determination of surface distortion (oil canning)AS/NZS 4257.2:1994 Plastic roof and wall cladding materials - Methods of test - Determination of dimensional stability at 60 degrees AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheetAS/NZS 4257.4:1994 Plastic roof and wall cladding materials - Methods of test - Determination of diffuse light transmissionAS/NZS 4257.5:1994 Plastic roof and wall cladding materials - Methods of test - Determination of glass fibre contentAS/NZS 4257.6:1994 Plastic roof and wall cladding materials - Methods of test - Determination of impact resistance
AS/NZS 4257.7:1994Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
AS/NZS 4257.8:1994 Plastic roof and wall cladding materials - Methods of test - Determination of residual styreneAS/NZS 4257.9:1995 Plastic roof and wall cladding materials - Methods of test - Determination of transverse bending stiffnessAS/NZS 4266.0:2004 Reconstituted wood-based panels - Methods of test - General introduction and list of methodsAS/NZS 4266.1:2004 Reconstituted wood-based panels - Methods of test - Sampling, cutting, and conditioning of test piecesAS/NZS 4266.10:2004 Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 oC AS/NZS 4266.11:2004 Reconstituted wood-based panels - Methods of test - Moisture resistance under cyclic test conditionsAS/NZS 4266.12:2003 Reconstituted wood-based panels - Methods of test - Surface water absorptionAS/NZS 4266.13:2004 Reconstituted wood-based panels - Methods of test - Resistance to axial withdrawal of screwsAS/NZS 4266.14:2004 Reconstituted wood-based panels - Methods of test - Dimensional changes associated with changes in relative AS/NZS 4266.16:2004 Reconstituted wood-based panels - Methods of test - Formaldehyde emission - Desiccator methodAS/NZS 4266.18:1995 Reconstituted wood-based panels - Methods of test - Determination of efficacy of fungicide treatmentAS/NZS 4266.19:2004 Reconstituted wood-based panels - Methods of test - Assessing appearance of melamine overlaid panelsAS/NZS 4266.2:2004 Reconstituted wood-based panels - Methods of test - Dimensions, squareness, flatness and edge straightness of AS/NZS 4266.20:2004 Reconstituted wood-based panels - Methods of test - Resistance to surface abrasion (Taber abrasion test)AS/NZS 4266.21:2004 Reconstituted wood-based panels - Methods of test - Over-cure or under-cure of resinAS/NZS 4266.22:2004 Reconstituted wood-based panels - Methods of test - Porosity of laminated surfaceAS/NZS 4266.23:2004 Reconstituted wood-based panels - Methods of test - Resistance to steamAS/NZS 4266.24:2004 Reconstituted wood-based panels - Methods of test - Resistance to crackingAS/NZS 4266.25:2004 Reconstituted wood-based panels - Methods of test - Resistance to stainingAS/NZS 4266.26:2004 Reconstituted wood-based panels - Methods of test - Resistance to dry heat
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4266.27:2004 Reconstituted wood-based panels - Methods of test - Resistance to impactAS/NZS 4266.28:2004 Reconstituted wood-based panels - Methods of test - Bond strength PVC filmsAS/NZS 4266.29:2004 Reconstituted wood-based panels - Methods of test - Heat resistance of PVC filmsAS/NZS 4266.3:2004 Reconstituted wood-based panels - Methods of test - Moisture contentAS/NZS 4266.30:2004 Reconstituted wood-based panels - Methods of test - Moisture resistance of finished foilsAS/NZS 4266.31:2004 Reconstituted wood-based panels - Methods of test - Adhesion of paper foils by the crosscut testAS/NZS 4266.32:2004 Reconstituted wood-based panels - Methods of test - Veneer bond strengthAS/NZS 4266.33:2004 Reconstituted wood-based panels - Methods of test - Veneer bond durabilityAS/NZS 4266.34:2004 Reconstituted wood-based panels - Methods of test - Surface absorptionAS/NZS 4266.35:2004 Reconstituted wood-based panels - Methods of test - Dimensions of test piecesAS/NZS 4266.4:2004 Reconstituted wood-based panels - Methods of test - DensityAS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strengthAS/NZS 4266.6:2004 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel AS/NZS 4266.7:2004 Reconstituted wood-based panels - Methods of test - Surface soundnessAS/NZS 4266.8:2004 Reconstituted wood-based panels - Methods of test - Swelling in thickness after immersion in waterAS/NZS 4266.9:2003 Reconstituted wood-based panels - Methods of test - Thickness stability and glue bond qualityAS/NZS 4284:2008 Testing of building facadesNZS 4297:1998 Engineering design of earth buildingsNZS 4298:1998 Materials and workmanship for earth buildingsNZS 4299:1998 Earth buildings not requiring specific designNZS 4302:1987 Code of practice for the control of hygiene in air and water systems in buildingsNZS 4303:1990 Ventilation for acceptable indoor air qualityNZS 4304:2002 Management of Healthcare WasteNZS 4305:1996 Energy efficiency - Domestic type hot water systemsNZS 4306:2005 Residential property inspectionAS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applicationsAS/NZS 4331.1:1995 Metallic flanges - Steel flangesAS/NZS 4331.2:1995 Metallic flanges - Cast iron flangesAS/NZS 4331.3:1995 Metallic flanges - Copper alloy and composite flangesNZS 4332:1997 Non-domestic passenger and goods liftsNZS 4334:2012 Platform lifts and low-speed liftsAS/NZS 4347.0:1995 Damp-proof courses and flashings - Methods of test - General introduction, list of methods and test specimen AS/NZS 4347.1:1995 Damp-proof courses and flashings - Methods of test - Determination of water permeabilityAS/NZS 4347.10:1995 Damp-proof courses and flashings - Methods of test - Determination of mass of desaturated base and AS/NZS 4347.2:1995 Damp-proof courses and flashings - Methods of test - Determination of continuity of coating on metal centresAS/NZS 4347.3:1995 Damp-proof courses and flashings - Methods of test - Determination of pliability of bitumen coating on metal AS/NZS 4347.4:1995 Damp-proof courses and flashings - Methods of test - Determination of pliability - Materials with fabric or felt AS/NZS 4347.5:1995 Damp-proof courses and flashings - Methods of test - Determination of compression properties
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS/NZS 4347.7:1995Damp-proof courses and flashings - Methods of test - Determination of thickness of bitumen coating and thickness or mass of metallic centre
AS/NZS 4347.8:1995 Damp-proof courses and flashings - Methods of test - Preparation of coating bitumen for testingAS/NZS 4347.9:1995 Damp-proof courses and flashings - Methods of test - Determining thicknessAS/NZS 4348:1995 Water supply - Domestic type water treatment appliances - Performance requirementsAS/NZS 4353:1995 Portable fire extinguishers - Aerosol typeAS/NZS 4357.0:2005 Structural laminated veneer lumber - SpecificationsAS/NZS 4357.1:2005 Structural laminated veneer lumber - Method of test for measurement of dimensions and shapeAS/NZS 4357.2:2006 Structural laminated veneer lumber - Determination of structural properties - Test methodsAS/NZS 4357.3:2006 Structural laminated veneer lumber - Determination of structural properties - Evaluation methodsAS/NZS 4357.4:2005 Structural laminated veneer lumber - Determination of formaldehyde emissionsAS/NZS 4364:2010 Timber - Bond performance of structural adhesivesAS/NZS 4386.1:1996 Domestic kitchen assemblies - Kitchen unitsAS/NZS 4386.2:1996 Domestic kitchen assemblies - InstallationAS/NZS 4387.0:1996 Domestic kitchen assemblies - Methods of test - Introduction, list of methods and general requirementsAS/NZS 4387.1:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of carcass and underframeAS/NZS 4387.10:1996 Domestic kitchen assemblies - Methods of test - Determination of slam open of drawersAS/NZS 4387.11:1996 Domestic kitchen assemblies - Methods of test - Determination of slam shut of drawersAS/NZS 4387.12:1996 Domestic kitchen assemblies - Methods of test - Determination of retention of the bottom surface of drawersAS/NZS 4387.13:1996 Domestic kitchen assemblies - Methods of test - Determination of wear and fatigue of drawers, sliding shelves AS/NZS 4387.14:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of handlesAS/NZS 4387.15:1996 Domestic kitchen assemblies - Methods of test - Determination of the strength of support frames for wall AS/NZS 4387.16:1996 Domestic kitchen assemblies - Methods of test - Determination of calibration of drawer slamming apparatusAS/NZS 4387.2:1996 Domestic kitchen assemblies - Methods of test - Determination of shelf deflectionAS/NZS 4387.3:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of shelf supportsAS/NZS 4387.4:1996 Domestic kitchen assemblies - Methods of test - Determination of the strength of worktops and bottom AS/NZS 4387.5:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of hinged doorsAS/NZS 4387.6:1996 Domestic kitchen assemblies - Methods of test - Determination of slam open of hinged doorsAS/NZS 4387.7:1996 Domestic kitchen assemblies - Methods of test - Determination of slam shut of hinged doorsAS/NZS 4387.8:1996 Domestic kitchen assemblies - Methods of test - Determination of wear and fatigue of hinged doors
AS/NZS 4387.9:1996Domestic kitchen assemblies - Methods of test - Determination of resistance to downward static load on drawers and other runner-supported items
AS/NZS 4389:2015 Roof safety meshAS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene NZS 4402.1 to 7:1986 Set Methods of testing soils for civil engineering purposes - Soil TestsNZS 4402.2.2:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.2 Determination of the NZS 4402.2.4:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.4 Determination of the
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 4402.2.6:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.6 Determination of the NZS 4402.2.8.1:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.1 Standard method by NZS 4402.2.8.2:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.2 Subsidiary method by
NZS 4402.2.8.3:1986Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.3 Standard method for fine soils (pipette method)
NZS 4402.2.8.4:1986Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.4 Subsidiary method for fine soils (hydrometer method)
NZS 4402.4.1.1:1986Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the dry density/water content relationship - Test 4.1.1 New Zealand standard compaction test
NZS 4402.4.2.1:1988Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.1 Minimum dry density
NZS 4402.4.2.2:1988Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.2 Maximum dry density
NZS 4402.4.2.3:1988Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.3 Relative density
NZS 4402.5.1.1:1986Methods of testing soils for civil engineering purposes - Soil density tests - Determination of the density of soil - Test 5.1.1 Sand replacement method for the determination of in situ density
NZS 4404:2010 Land development and subdivision infrastructureNZS 4407:2015 Methods of sampling and testing road aggregatesNZS 4431:1989 Code of practice for earth fill for residential developmentAS/NZS 4441:2008 Oriented PVC (PVC-O) pipes for pressure applicationsNZS 4441:2008 Swimming pool design StandardNZS 4442:1988 Welded steel pipes and fittings for water, sewage and medium pressure gasAS/NZS 4442:1997 Office desksAS/NZS 4443:1997 Office panel systems - WorkstationsAS/NZS 4445.1:1997 Solar heating - Domestic water heating systems - Performance rating procedure using indoor test methodsNZS 4454:2005 Composts, soil conditioners and mulchesAS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall units - Masonry unitsAS/NZS 4455.2:2010 Masonry units, pavers, flags and segmental retaining wall units - Pavers and flagsAS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall units - Segmental retaining wall unitsAS/NZS 4456:2003 Masonry units, segmental pavers and flags - Methods of testAS/NZS 4487:1997 Pyrogen fire extinguishing systemsAS/NZS 4490:2011 Timber - Solid - Stress-graded for structural purposes - Verification of propertiesAS/NZS 4491:1997 Timber - Glossary of terms in timber related StandardsAS/NZS 4494:1998 Discharge of commercial and industrial liquid waste to sewer - General performance requirementsNZS 4503:2005 Hand operated fire-fighting equipmentSNZ PAS 4505:2007 Firefighting waterway equipmentAS/NZS 4505:2012 Garage doors and other large access doors
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4507:2006 Cables - Classification of characteristics when exposed to fireAS/NZS 4509.1:2009 Stand-alone power systems - Safety and installationAS/NZS 4509.2:2010 Stand-alone power systems - System designSNZ PAS 4509:2008 New Zealand Fire Service firefighting water supplies code of practiceNZS 4510:1998 Fire hydrant systems for buildingsNZS 4510:2008 Fire hydrant systems for buildingsNZS 4512:2010 Fire detection and alarm systems in buildingsNZS 4514:2009 Interconnected smoke alarms for housesNZS 4515:2003 Fire sprinkler systems for residential occupanciesNZS 4515:2009 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres)NZS 4517:2002 Fire sprinkler systems for housesNZS 4517:2010 Fire sprinkler systems for housesNZS 4520:2010 Fire-resistant doorsetsNZS 4521:1974 Specification for boxes for fire brigade connectionsNZS 4522:2010 Underground fire hydrantsSNZ HB 4525:2006 Fire Risk Management HandbookAS/NZS 4534:2006 Zinc and zinc/aluminium-alloy coatings on steel wireNZS 4541:2003 Automatic fire sprinkler systemsNZS 4541:2007 Automatic fire sprinkler systemsNZS 4541:2013 Automatic fire sprinkler systemsAS/NZS 4543.2:1999 Protective devices against diagnostic medical X-radiation - Protective glass platesAS/NZS 4585.1:1999 Low styrene emission resins - Determination of styrene evaporation from unsaturated polyester and vinyl ester
AS/NZS 4585.2:1999Low styrene emission resins - The assessment of degree of interlaminar adhesion in unsaturated polyester and vinyl ester resin - Glass fibre laminates
AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materialsAS/NZS 4600 Supplement 1:1998 Cold-formed steel structures - CommentaryAS/NZS 4600:2005 Cold-formed steel structuresNZS 4602:1988 Low pressure copper thermal storage electric water heatersNZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open-vented systems)NZS 4604:1990 Dairy-type thermal storage electric water heatersNZS 4606.1:1989 Storage water heaters - General requirementsNZS 4606.2:1989 Storage water heaters - Specific requirements for water heaters with single shellsNZS 4606.3:1992 Storage water heaters - Specific requirements for water heaters with composite shellsNZS 4607:1989 Installation of thermal storage electric water heaters: valve-vented systemsNZS 4608:1992 Control valves for hot water systemsNZS 4613:1986 Domestic solar water heatersNZS 4614:1986 Installation of domestic solar water heating systemsNZS 4617:1989 Tempering (3-port mixing) valves
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4663:2004 Slip resistance measurement of existing pedestrian surfacesAS/NZS 4666:2012 Insulating glass unitsAS/NZS 4667:2000 Quality requirements for cut-to-size and processed glassAS/NZS 4668:2000 Glossary of terms used in the glass and glazing industryAS/NZS 4671:2001 Steel reinforcing materialsAS/NZS 4672.1:2007 Steel prestressing materials - General requirementsAS/NZS 4672.2:2007 Steel prestressing materials - Testing requirementsAS/NZS 4673:2001 Cold-formed stainless steel structuresAS/NZS 4676:2000 Structural design requirements for utility services polesAS/NZS 4677:2010 Steel utility services polesAS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articlesAS/NZS 4692.1:2005 Electric water heaters - Energy consumption, performance and general requirementsAS/NZS 4692.2:2005 Electric water heaters - Minimum Energy Performance Standard (MEPS) requirements and energy labellingAS/NZS 4740:2000 Natural ventilators - Classification and performance
NZS/BS 476.20:1987Fire tests on building materials and structures - Method for determination of the fire resistance of elements of construction (general principles)
NZS/BS 476.21:1987 Fire tests on building materials and structures - Methods for determination of the fire resistance of loadbearing
NZS/BS 476.22:1987Fire tests on building materials and structures - Methods for determination of the fire resistance of non-loadbearing elements of construction
AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applicationsAS/NZS 4766:2006 Polyethylene storage tanks for water and chemicalsNZS 4781:1973 Code of practice for safety in welding and cutting
AS/NZS 4783.2:2002Performance of electrical lighting equipment - Ballasts for fluorescent lamps - Energy labelling and minimum energy performance standards requirements
AS/NZS 4787:2001 Timber - Assessment of drying qualityAS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line processAS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized processAS/NZS 4793:2009 Mechanical tapping bands for waterworks purposesAS/NZS 4798(Int):2005 Polyethylene maintenance shaftsAS/NZS 4801:2001 Occupational Health and Safety Management Systems - Specification with guidance for useAS/NZS 4804:2001 Occupational Health and Safety Management Systems - General guidelines on principles, systems and NZS/AS 4830-2007 Determination of the extinction propensity of cigarettesAS/NZS 4858:2004 Wet area membranesAS/NZS 4859.1:2002 Materials for the thermal insulation of buildings - General criteria and technical provisionsAS/NZS 4886:2007 Domestic solid fuel burning appliance - Pellet heaters - Determination of flue gas emissionAS/NZS 4911:2003 General conditions of contract for the supply of equipment without installationAS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systemsAS/NZS 4994.1:2009 Temporary roof edge protection for housing and residential buildings - General requirements
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4994.2:2009 Temporary roof edge protection for housing and residential buildings - Roof edge protection - Installation and AS/NZS 4994.3:2010 Temporary roof edge protection for housing and residential buildings - Installation and dismantling for edges AS/NZS 4998:2009 Bolted unrestrained mechanical couplings for waterworks purposesAS/NZS 4999:2006 PVC-U maintenance shaftsAS/NZS 5000.1:2005 Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kVAS/NZS 5000.2:2006 Electric cables - Polymeric insulated - For working voltages up to and including 450/750 VTR 5058:2009 Temperature rerating of PVC pressure pipes operating at elevated temperaturesAS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applicationsAS/NZS 5078:2007 Domestic solid fuel burning appliances - Pellet heaters - Method for determination of power output and AS/NZS 5125.1:2014 Heat pump water heaters - Performance assessment - Part 1: Air source heat pump water heatersNZS 5255:2014 Safety verification of existing gas installationsNZS 5258:2003 Gas distribution networksNZS 5261:2003 Gas installationAppendix H to NZS 5261:2003 Gas installation - Guidelines for gas appliance commissioning (Appendix H)Appendix I to NZS 5261:2003 Gas installation - Large installation commissioning (Appendix I)NZS 5262:2003 Gas appliance safetyNZS 5266:2014 Safety of gas appliancesNZS 5270:2005 Cable cars for private residences - Design, construction, installation and maintenanceAS/NZS 5601.1:2010 Gas installations - Part 1: General installationsAS/NZS 5601.1:2013 Gas installations - Part 1: General installationsAS/NZS 5601.2:2010 Gas installations - Part 2: LP Gas installations in caravans and boats for non-propulsive purposesNZS 5807:1980 Code of practice for industrial identification by colour, wording or other codingNZS 5826:2010 Pool water qualitySNZ HB 5828.1:2006 General Playground Equipment and Surfacing HandbookSNZ HB 5828.2:2006 Supervised Early Childhood Facilities - Playground Equipment and Surfacing HandbookNZS 5828:2004 Playground equipment and surfacingNZS 5828:2015 Playground equipment and surfacingAS/NZS 60155:2000 Glow-starters for fluorescent lampsAS/NZS 60335.1:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 1: General requirementsAS/NZS 60335.1:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 1: General requirementsAS/NZS 60335.2.10:2006 Household and similar electrical appliances - Safety - Particular requirements for floor treatment machines and
AS/NZS 60335.2.100:2003Household and similar electrical appliances - Safety - Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
AS/NZS 60335.2.101:2002 Household and similar electrical appliances - Safety - Particular requirements for vaporizers
AS/NZS 60335.2.102:2013 (Excluding IEC text)Household and similar electrical appliances - Safety - Part 2.102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
AS/NZS 60335.2.102:2013 (Including IEC text)Household and similar electrical appliances - Safety - Part 2.102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.103:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.103: Particular requirements for drives for gates, AS/NZS 60335.2.105:2006 Household and similar electrical appliances - Safety - Particular requirements for multifunctional shower AS/NZS 60335.2.106:2007 Household and similar electrical appliances - Safety - Underfloor heatingAS/NZS 60335.2.109:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.109: Particular requirements for UV radiation water AS/NZS 60335.2.11:2009 Household and similar electrical appliances - Safety - Particular requirements for tumble dryersAS/NZS 60335.2.12:2004 Household and similar electrical appliances - Safety - Particular requirements for warming plates and similar AS/NZS 60335.2.13:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements for deep fat fryers, frying pans and AS/NZS 60335.2.14:2007 Household and similar electrical appliances - Safety - Particular requirements for kitchen machinesAS/NZS 60335.2.15:2002 Household and similar electrical appliances - Safety - Particular requirements for appliances for heating liquidsAS/NZS 60335.2.16:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.16: Particular requirements for food waste
AS/NZS 60335.2.17:2012 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
AS/NZS 60335.2.2:2010 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
AS/NZS 60335.2.21:2002 Household and similar electrical appliances - Safety - Particular requirements for storage water heatersAS/NZS 60335.2.23:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.23: Particular requirements for appliances for skin
AS/NZS 60335.2.24:2010 (Includes IEC text)Household and similar electrical appliances - Safety - Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
AS/NZS 60335.2.25:2011 (Excludes IEC text)Household and similar electrical appliances - Safety - Part 2.25: Particular requirements for microwave ovens including combination microwave ovens
AS/NZS 60335.2.25:2011 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.25: Particular requirements for microwave ovens including combination microwave ovens
AS/NZS 60335.2.26:2006 Household and similar electrical appliances - Safety - Particular requirements for clocks
AS/NZS 60335.2.27:2010 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
AS/NZS 60335.2.28:2006 Household and similar electrical appliances - Safety - Particular requirements for sewing machinesAS/NZS 60335.2.29:2004 Household and similar electrical appliances - Safety - Particular requirements for battery chargersAS/NZS 60335.2.3:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.3: Particular requirements for electric ironsAS/NZS 60335.2.30:2009 Household and similar electrical appliances - Safety - Particular requirements for room heatersAS/NZS 60335.2.30:2015 (Excl IEC text) Household and similar electrical appliances - Safety - Part 2.30: Particular requirements for room heatersAS/NZS 60335.2.30:2015 (Incl IEC text) Household and similar electrical appliances - Safety - Part 2.30: Particular requirements for room heatersAS/NZS 60335.2.31:2004 Household and similar electrical appliances - Safety - Particular requirements for range hoods and other cooking AS/NZS 60335.2.32:2004 Household and similar electrical appliances - Safety - Particular requirements for massage appliancesAS/NZS 60335.2.32:2014 Household and similar electrical appliances - Safety - Part 2.32: Particular requirements for massage appliancesAS/NZS 60335.2.32:2014 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.32: Particular requirements for massage appliancesAS/NZS 60335.2.34:2003 Household and similar electrical appliances - Safety - Particular requirements for motor-compressorsAS/NZS 60335.2.34:2013 (Excludes IEC text) Household and similar electrical appliances – Safety – Part 2.34: Particular requirements for motor-AS/NZS 60335.2.35:2004 Household and similar electrical appliances - Safety - Particular requirements for instantaneous water heaters
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.4:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements for spin extractors
AS/NZS 60335.2.40:2006Household and similar electrical appliances - Safety - Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
AS/NZS 60335.2.40:2015 (Excludes IEC text)Household and similar electrical appliances - Safety - Part 2.40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
AS/NZS 60335.2.40:2015 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
AS/NZS 60335.2.41:2004 Household and similar electrical appliances - Safety - Particular requirements for pumpsAS/NZS 60335.2.43:2005 Household and similar electrical appliances - Safety - Particular requirements for clothes dryers and towel railsAS/NZS 60335.2.44:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.44: Particular requirements for ironersAS/NZS 60335.2.45:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.45: Particular requirements for portable heating AS/NZS 60335.2.5:2002 Household and similar electrical appliances - Safety - Particular requirements for dishwashersAS/NZS 60335.2.5:2014 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.5: Particular requirements for dishwashersAS/NZS 60335.2.5:2014 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.5: Particular requirements for dishwashers
AS/NZS 60335.2.51:2012 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.51: Particular requirements for stationary circulation pumps for heating and service water installations
AS/NZS 60335.2.52:2006 Household and similar electrical appliances - Safety - Particular requirements for oral hygiene appliancesAS/NZS 60335.2.53:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.53: Particular requirements for sauna heating
AS/NZS 60335.2.54:2010 (Includes IEC text)Household and similar electrical appliances - Safety - Particular requirements for surface cleaning appliances for household use employing liquids or steam
AS/NZS 60335.2.55:2011Household and similar electrical appliances - Safety - Part 2.55: Particular requirements for electrical appliances for use with aquariums and garden ponds
AS/NZS 60335.2.56:2006 Household and similar electrical appliances - Safety - Particular requirements for projectors and similar AS/NZS 60335.2.59:2005 Household and similar electrical appliances - Safety - Particular requirements for insect killers
AS/NZS 60335.2.6:2008Household and similar electrical appliances - Safety - Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
AS/NZS 60335.2.6:2014 (Excludes IEC text)Household and similar electrical appliances - Safety - Part 2.6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
AS/NZS 60335.2.6:2014 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
AS/NZS 60335.2.60:2006 Household and similar electrical appliances - Safety - Particular requirements for whirlpool baths and whirlpool AS/NZS 60335.2.61:2005 Household and similar electrical appliances - Safety - Particular requirements for thermal-storage room heatersAS/NZS 60335.2.65:2006 Household and similar electrical appliances - Safety - Particular requirements for air-cleaning appliancesAS/NZS 60335.2.65:2015 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.65: Particular requirements for air-cleaning AS/NZS 60335.2.65:2015 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.65: Particular requirements for air-cleaning AS/NZS 60335.2.66:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.66: Particular requirements for water-bed heaters
AS/NZS 60335.2.67:2002Household and similar electrical appliances - Safety - Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.68:2003Household and similar electrical appliances - Safety - Particular requirements for spray extraction appliances, for industrial and commercial use
AS/NZS 60335.2.68:2013 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.68: Particular requirements for spray extraction AS/NZS 60335.2.68:2013 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.68: Particular requirements for spray extraction
AS/NZS 60335.2.69:2012 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
AS/NZS 60335.2.7:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.7: Particular requirements for washing machinesAS/NZS 60335.2.70:2002 Household and similar electrical appliances - Safety - Particular requirements for milking machines
AS/NZS 60335.2.71:2002Household and similar electrical appliances - Safety - Particular requirements for electrical heating appliances for breeding and rearing animals
AS/NZS 60335.2.72:2003Household and similar electrical appliances - Safety - Particular requirements for automatic machines for floor treatment for commercial and industrial use
AS/NZS 60335.2.72:2013 (Excludes IEC text)Household and similar electrical appliances - Safety - Part 2.72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
AS/NZS 60335.2.72:2013 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
AS/NZS 60335.2.73:2005 Household and similar electrical appliances - Safety - Particular requirements for fixed immersion heatersAS/NZS 60335.2.74:2005 Household and similar electrical appliances - Safety - Particular requirements for portable immersion heatersAS/NZS 60335.2.75:2005 Household and similar electrical appliances - Safety - Particular requirements for commercial dispensing AS/NZS 60335.2.76:2003 Household and similar electrical appliances - Safety - Particular requirements for electric fence energizersAS/NZS 60335.2.77:2002 Household and similar electrical appliances - Safety - Particular requirements for pedestrian controlled mains-AS/NZS 60335.2.78:2005 Household and similar electrical appliances - Safety - Particular requirements for outdoor barbecuesAS/NZS 60335.2.79:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.79: Particular requirements for high pressure AS/NZS 60335.2.8:2004 Household and similar electrical appliances - Safety - Particular requirements for shavers, hair clippers and AS/NZS 60335.2.8:2013 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.8: Particular requirements for shavers, hair AS/NZS 60335.2.80:2004 Household and similar electrical appliances - Safety - Particular requirements for fansAS/NZS 60335.2.81:2012 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and AS/NZS 60335.2.81:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and AS/NZS 60335.2.81:2015 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and AS/NZS 60335.2.81:2015 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and AS/NZS 60335.2.82:2006 Household and similar electrical appliances - Safety - Particular requirements for amusement machines and
AS/NZS 60335.2.82:2015 (Excludes IEC text)Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and personal service machines
AS/NZS 60335.2.82:2015 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and personal service machines
AS/NZS 60335.2.83:2002 Household and similar electrical appliances - Safety - Particular requirements for heated gullies for roof AS/NZS 60335.2.84:2006 Household and similar electrical appliances - Safety - Particular requirements for toiletsAS/NZS 60335.2.84:2014 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.84: Particular requirements for toilet appliances
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.84:2014 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.84: Particular requirements for toilet appliancesAS/NZS 60335.2.85:2005 Household and similar electrical appliances - Safety - Particular requirements for fabric steamersAS/NZS 60335.2.86:2002 Household and similar electrical appliances - Safety - Particular requirements for appliances for electric fishing AS/NZS 60335.2.86:2013 Household and similar electrical appliances - Safety - Part 2.86: Particular requirements for electric fishing AS/NZS 60335.2.87:2002 Household and similar electrical appliances - Safety - Particular requirements for electric animal-stunning
AS/NZS 60335.2.89:2010 (Includes IEC text)Household and similar electrical appliances - Safety - Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
AS/NZS 60335.2.9:2009 Household and similar electrical appliances - Safety - Particular requirements for grills, toasters and similar
AS/NZS 60335.2.9:2014 (Excludes IEC text)Household and similar electrical appliances - Safety - Part 2.9: Particular requirements for grills, toasters and similar portable cooking appliances
AS/NZS 60335.2.9:2014 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.9: Particular requirements for grills, toasters and similar portable cooking appliances
AS/NZS 60335.2.90:2006 Household and similar electrical appliances - Safety - Particular requirements for commercial microwave ovensAS/NZS 60335.2.90:2015 (Excl IEC text) Household and similar electrical appliances - Safety - Part 2.90: Particular requirements for commercial AS/NZS 60335.2.90:2015 (Incl IEC text) Household and similar electrical appliances - Safety - Part 2.90: Particular requirements for commercial
AS/NZS 60335.2.91:2008Household and similar electrical appliances - Safety - Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
AS/NZS 60335.2.92:2003Household and similar electrical appliances - Safety - Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
AS/NZS 60335.2.94:2008 Household and similar electrical appliances - Safety - Particular requirements for scissors type grass shears
AS/NZS 60335.2.95:2012 (Includes IEC text)Household and similar electrical appliances - Safety - Part 2.95: Particular requirements for drives for vertically moving garage doors for residential use
AS/NZS 60335.2.96:2002 Household and similar electrical appliances - Safety - Particular requirements for flexible sheet heating elements
AS/NZS 60335.2.97:2007Household and similar electrical appliances - Safety - Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
AS/NZS 60335.2.98:2005 Household and similar electrical appliances - Safety - Particular requirements for humidifiersAS/NZS 60598.1:2013 Luminaires - Part 1: General requirements and testsAS/NZS 60598.2.1:2014 Luminaires - Part 2.1: Particular requirements - Fixed general purpose luminairesAS/NZS 60598.2.10:2015 Luminaires - Part 2.10: Particular requirements - Portable luminaires for childrenAS/NZS 60598.2.17:2006 Luminaires - Particular requirements - Luminaires for stage lighting, television, film and photographic studios AS/NZS 60598.2.18:1998 Luminaires - Particular requirements - Luminaires for swimming pools and similar applicationsAS/NZS 60598.2.19:2001 Luminaires - Particular requirements - Air handling luminaries (safety requirements)AS/NZS 60598.2.2:2001 Luminaires - Particular requirements - Recessed luminairesAS/NZS 60598.2.20:2002 Luminaires - Particular requirements - Lighting chainsAS/NZS 60598.2.22:2005 Luminaires - Particular requirements - Luminaires for emergency lightingAS/NZS 60598.2.23:2002 Luminaires - Particular requirements - Extra low voltage lighting systems for filament lampsAS/NZS 60598.2.25:2001 Luminaires - Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildingsAS/NZS 60598.2.4:2005 Luminaires - Particular requirements - Portable general purpose luminaires
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60598.2.5:2002 Luminaires - Particular requirements - FloodlightsAS/NZS 60598.2.6:1998 Luminaires - Particular requirements - Luminaires with built-in transformers for filament lampsAS/NZS 60598.2.7:2005 Luminaires - Particular requirements - Portable luminaires for garden useAS/NZS 60598.2.8:2015 Luminaires - Part 2.8: Particular requirements - HandlampsAS/NZS 60598.2.9:2006 Luminaires - Particular requirements - Photo and film luminaires (non-professional)
AS/NZS IEC 60601.2.1:2015Medical electrical equipment - Part 2.1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV
AS/NZS IEC 60601.2.16:2015Medical electrical equipment - Part 2.16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
AS/NZS IEC 60601.2.17:2015Medical electrical equipment - Part 2.17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment
AS/NZS IEC 60601.2.18:2015 Medical electrical equipment - Part 2.18: Particular requirements for basic safety and essential performance of AS/NZS IEC 60601.2.21:2015 Medical electrical equipment - Part 2.21: Particular requirements for the basic safety and essential performance
AS/NZS IEC 60601.2.28:2015Medical electrical equipment - Part 2.28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
AS/NZS IEC 60601.2.29:2015Medical electrical equipment - Part 2.29: Particular requirements for the basic safety and essential performance of radiotherapy simulators
AS/NZS IEC 60601.2.45:2015Medical electrical equipment - Part 2.45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
AS/NZS IEC 60601.2.8:2015Medical electrical equipment - Part 2.8: Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV
AS/NZS 60695.1.1:2001 Fire hazard testing - Guidance for assessing the fire hazard of electrotechnical products - General guidelines
AS/NZS 60695.10.2:2004Fire hazard testing - Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires - Abnormal heat - Ball pressure test
AS/NZS 60695.11.10:2001 Fire hazard testing - Test flames - 50 W horizontal and vertical flame test methodsAS/NZS 60695.11.2:2004 Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement AS/NZS 60695.11.20:2001 Fire hazard testing - Test flames - 500 W flame test methodsAS/NZS 60695.11.3:2004 Fire hazard testing - Test flames - 500 W flames - Apparatus and confirmational test methodsAS/NZS 60695.11.4:2004 Fire hazard testing - Test flames - 50 W flames - Apparatus and confirmational test methodsAS/NZS 60695.11.5:2005 Fire hazard testing - Test flames - Needle-flame test method - Apparatus, conformity test arrangement and AS/NZS 60695.2.10:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire apparatus and common test procedureAS/NZS 60695.2.11:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test method for end AS/NZS 60695.2.12:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test method for materialsAS/NZS 60695.2.13:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire ignitability test method for materialsAS/NZS 60695.4:2002 Fire hazard testing - Terminology concerning fire testsAS/NZS 60702.1:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - CablesAS/NZS 60702.2:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Terminations
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60898.1:2004Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. operation
AS/NZS 60898.2:2004Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. and d.c. operation
AS/NZS 60922:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety AS/NZS 60923:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirementsAS/NZS 61000.6.1:2006 Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential, commercial and light
AS/NZS 61000.6.3:2012Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for residential, commercial and light-industrial environments
NZS 6104:1981 Specification for emergency electricity supply in buildingsAS/NZS 61046:2001 Auxiliaries for lamps - D.C. or A.C. supplied electronic step-down convertors for filament lamps - General and AS/NZS 61347.1:2002 Lamp controlgear - General and safety requirementsAS/NZS 61347.2.1:2002 Lamp controlgear - Particular requirements for starting devices (other than glow starters)
AS/NZS 61347.2.10:2004Lamp controlgear - Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
AS/NZS 61347.2.11:2003 Lamp controlgear - Particular requirements for miscellaneous electronic circuits used with luminairesAS/NZS 61347.2.2:2007 Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic step-down convertors for AS/NZS 61347.2.3:2004 Lamp controlgear - Particular requirements for a.c. supplied electronic ballasts for fluorescent lampsAS/NZS 61347.2.8:2003 Lamp controlgear - Particular requirements for ballasts for fluorescent lampsAS/NZS 61347.2.9:2004 Lamp controlgear - Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)AS/NZS 61386.1:2015 Conduit systems for cable management - Part 1: General requirementsAS/NZS 61386.21:2015 Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systemsAS/NZS 61386.22:2015 Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systemsAS/NZS 61386.23:2015 Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systemsNZS 6214:1988 Thermostats and thermal cutouts for domestic thermal storage electric water heaters (alternating current only)AS/NZS 6400:2005 Water efficient products - Rating and labellingNZS 6703:1984 Code of practice for interior lighting designNZS 6801:2008 Acoustics - Measurement of environmental soundNZS 6802:2008 Acoustics - Environmental noiseNZS 6803:1999 Acoustics - Construction noiseNZS 7601:1978 Specification for polyethylene pipe (Type 3) for cold water servicesNZS 7602:1977 Specification for polyethylene pipe (Type 5) for cold water servicesNZS 7603:1979 Specification for refuse bags for local authority collection (low density polyethylene)NZS 7610:1991 Blue polyethylene pipes up to nominal size 63 for below ground use for potable waterNZS 7643:1979 Code of practice for the installation of unplasticized PVC pipe systemsNZS 7646:1978 Specification for polyethylene pipes and fittings for gas reticulationAS/NZS 7671:2010 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 8008(Int):2014 Timber - Finger-jointed structural timber - Performance requirementsNZS 8500:2006 Safety barriers and fences around swimming pools, spas and hot tubsSNZ HB 8630:2004 Tracks and outdoor visitor structuresSA/SNZ HB 90.1:2012 The small business handbook - Guide to ISO 9001:2008AS/NZS ISO 9001:2008 Quality management systems - RequirementsNZS 9201.1:2007 Model general bylaws - IntroductionNZS 9201.11:2000 Model general bylaws - Fires in the open airNZS 9201.12:1999 Model general bylaws - Control of dogsNZS 9201.13:1999 Model general bylaws - The keeping of animals, poultry and beesNZS 9201.14:1999 Model general bylaws - Cemeteries and crematoriaNZS 9201.2:1999 Model general bylaws - Public placesNZS 9201.22:1999 Model general bylaws - Wastewater drainageNZS 9201.23:2004 Model general bylaws - Trade wasteNZS 9201.24:1999 Model general bylaws - Food safetyNZS 9201.25:2007 Model general bylaws - TrafficNZS 9201.27:2000 Model general bylaws - On-site wastewater disposal systemsNZS 9201.28:2007 Model general bylaws - SpeedNZS 9201.29:2007 Model general bylaws - Liquor controlNZS 9201.3:1999 Model general bylaws - HostelsNZS 9201.4:1999 Model general bylaws - Trading in public placesNZS 9201.6:1999 Model general bylaws - Solid wasteNZS 9201.7:2007 Model general bylaws - Water supplyNZS 9201.8:1999 Model general bylaws - Control of advertising signsNZS 9202:2003 Model Standing Orders for Meetings of Local Authorities and Community BoardsSNZ HB 9213:2003 Guide to Local Government Service Delivery Options
NZS/BS 970.1:1991Specification for wrought steels for mechanical and allied engineering purposes - General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
AS/NZS ISO 9972:2015 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method
