Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing...

120
Annonseringsdato: 2015-06-24 Standardiseringsprosjekter og nye standarder Listenummer: 11/2015 Listenummer: 11/2015 Side: 1 av 120

Transcript of Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing...

Page 1: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

Annonseringsdato: 2015-06-24

Standardiseringsprosjekterog

nye standarder

Listenummer: 11/2015

Listenummer: 11/2015 Side: 1 av 120

Page 2: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

01 Generelt. Terminologi. Standardisering. Dokumentasjon

01 Generelt. Terminologi. Standardisering. Dokumentasjon

Standardforslag til høring - europeiske (CEN)

prEN 736-2

Valves - Terminology - Part 2: Definition of components of valvesVentiler - Terminologi - Del 2: Definisjon av komponenter av ventiler

Språk: enKommentarfrist: 2015-09-07

prEN ISO 1101

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015)

Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering, plassering og kjøre ut (ISO/DIS 1011: 2014)

Språk: enKommentarfrist: 2015-08-25

prEN ISO 1101

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015)

Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering , plassering og utkjøring ( ISO/DIS 1101 : 2015 )

Språk: enKommentarfrist: 2015-08-25

prEN ISO 5577

Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2015)

Språk: enKommentarfrist: 2015-07-31

Standardforslag til høring - internasjonale (ISO)

ISO 7001:2007/DAmd 87

Symbol PI BP 009: Biometric facial recognition facility

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 88

Symbol PI BP 010: Look to a point

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 77

Symbol PI BP 015: No headwear

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 79

Symbol PI BP 017: No sunglasses

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 80

Symbol PI BP 018: Single person

Språk: enKommentarfrist: 2015-09-24

Listenummer: 11/2015 Side: 2 av 120

Page 3: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

01 Generelt. Terminologi. Standardisering. Dokumentasjon

ISO 7001:2007/DAmd 81

Symbol PI PF 037: Library

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 82

Symbol PI BP 019: Proceed forward

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 83

Symbol PI TF 036: Self-contained camper van

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 71

Symbol PI TF 034: Quarantine, plant

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 86

Symbol PI BP 012: Move hair

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 78

Symbol PI BP 016: Wait

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 74

Symbol PI PF 072: Loop for the hearing impaired

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 75

Symbol PI BP 014: Do not smile

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 76

Symbol PI BP 013: Open passport and place on scanning device

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 89

Symbol PI CF 019: Shoeshine

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 90

Symbol PI CF 020: Snack machine

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 91

Symbol PI PF 073: Priority facilities for obese people

Språk: enKommentarfrist: 2015-09-24

Listenummer: 11/2015 Side: 3 av 120

Page 4: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

01 Generelt. Terminologi. Standardisering. Dokumentasjon

ISO 7001:2007/DAmd 92

Symbol PI TF 038: Animal transportation

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 93

Symbol PI TF 039: Bus disembarkation

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 94

Symbol PI TF 040: Bus embarkation

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 95

Symbol PI TF 041: Priority seats for obese people

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 85

Symbol PI BP 011: Manual passport control

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 61

Symbol PI TF 029: Rental bicycle

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 69

Symbol PI TF 032: Quarantine, animal

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 68

Symbol PI TF 031: Quarantine

Språk: enKommentarfrist: 2015-09-24

ISO 7001:2007/DAmd 70

Symbol PI TF 033: Quarantine, people

Språk: enKommentarfrist: 2015-09-24

ISO/DIS 129-1

Technical drawings - Indication of dimensions and tolerances - Part 1: General principles

Språk: enKommentarfrist: 2015-07-20

ISO/DIS 374-1

Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risksSpråk: enKommentarfrist: 2015-09-13

Listenummer: 11/2015 Side: 4 av 120

Page 5: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

01 Generelt. Terminologi. Standardisering. Dokumentasjon

ISO/DIS 374-5

Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risksSpråk: enKommentarfrist: 2015-09-13

ISO/DIS 1101.2

Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out

Språk: enKommentarfrist: 2015-10-25

ISO/DIS 3767-3

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipmentSpråk: enKommentarfrist: 2015-08-04

ISO/DIS 5577

Non-destructive testing - Ultrasonic inspection - Vocabulary

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 5577

Non-destructive testing -- Ultrasonic testing -- Vocabulary

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 6405-1

Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 6621-1

Internal combustion engines -- Piston rings -- Part 1: Vocabulary

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 6621-1

Internal combustion engines -- Piston rings -- Part 1: Vocabulary

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 28564-2

Public information guidance systems -- Part 2: Design principles and requirements for location signs and direction signs

Språk: enKommentarfrist: 2015-08-16

ISO-standarder

ISO 7504:2015

Gas analysis -- Vocabulary

Språk: enErstatter A00008:20:024662

ISO 14084-2:2015

Process diagrams for power plants -- Part 2: Graphical symbols

Språk: en

Listenummer: 11/2015 Side: 5 av 120

Page 6: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

01 Generelt. Terminologi. Standardisering. Dokumentasjon

ISO/TS 19408:2015

Footwear -- Sizing -- Vocabulary and terminology

Språk: en

ISO/TS 24620-1:2015

Language resource management -- Controlled natural language (CNL) -- Part 1: Basic concepts and principles

Språk: en

ISO/TS 80004-2:2015

Nanotechnologies -- Vocabulary -- Part 2: Nano-objects

Språk: enErstatter A00008:20:044278

Rapporter fra CEN (CR)

CEN ISO/TS 80004-1:2014

Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010)

Språk: en

CEN ISO/TS 80004-3:2014

Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010)

Språk: en

CEN ISO/TS 80004-4:2014

Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)

Språk: en

CEN ISO/TS 80004-6:2015

Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013)

Språk: en

CEN ISO/TS 80004-8:2015

Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013)

Språk: en

CEN/TS 15989:2015

Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings

Språk: en

Fastsatte norske standarder

NS-EN 15429-4:2015

Sweepers - Part 4: Symbols for operator controls and other displaysFeiemaskiner - Del 4: Symboler for kontrollpaneler og andre skjermer

Språk: en

NS-EN ISO 3098-1:2015

Technical product documentation - Lettering - Part 1: General requirements (ISO 3098-1:2015)Teknisk produktsdokumentasjon - Skrift - Del 1: Generelle krav (ISO 3098-1:2015)

Språk: en

NS-EN ISO 5527:2015

Cereals - Vocabulary (ISO 5527:2015)Korn - Terminologi (ISO 5527:2015)

Språk: en

Listenummer: 11/2015 Side: 6 av 120

Page 7: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

01 Generelt. Terminologi. Standardisering. Dokumentasjon

NS-ISO 30300:2011

Information and documentation - Management systems for records - Fundamentals and vocabularyInformasjon og dokumentasjon - Ledelsessystemer for dokumentasjon - Grunntrekk og terminologi

Språk: en

NS-ISO 30300:2011

Information and documentation - Management systems for records - Fundamentals and vocabularyInformasjon og dokumentasjon - Ledelsessystemer for dokumentasjon - Grunntrekk og terminologi

Språk: no

Tilbaketrukne norske standarder

NS-EN 12584:1999

Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - TerminologyUregelmessigheter i skjæreflater ved oksygenbrenngass, laserstråle og plasmaskjæring - Terminologi

Språk: enIngen erstatning

NS-EN ISO 3098-0:1997

Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997)Teknisk produktsdokumentasjon - Skrift - Del 0: Generelle krav (ISO 3098-0:1997)

Språk: enIngen erstatning

03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport

Standardforslag til høring - europeiske (CEN)

prEN 13269

Maintenance - Guideline on preparation of maintenance contractsVedlikehold - Retningslinjer for utarbeidelse av vedlikeholdskontrakter

Språk: enKommentarfrist: 2015-08-09

prEN 14508 rev

Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail

Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for ikke-prioriterte brev

Språk: enKommentarfrist: 2015-07-19

prEN 16708

Beauty Salon Services - Requirements and recommendations for the provision of serviceSkjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten

Språk: enKommentarfrist: 2015-07-31

prEN 16708

Beauty Salon Services - Requirements and recommendations for the provision of serviceSkjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten

Språk: enKommentarfrist: 2015-07-31

prEN 16763

Services for fire safety systems and security systems

Språk: enKommentarfrist: 2015-08-14

Listenummer: 11/2015 Side: 7 av 120

Page 8: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport

prEN 16763

Services for fire safety systems and security systems

Språk: enKommentarfrist: 2015-08-14

prEN 16872

Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in HomeopathySpråk: enKommentarfrist: 2015-09-21

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 12812-1

Core Banking -- Mobile Financial Services -- Part 1: General framework

Språk: enKommentarfrist: 2015-08-29

ISO/DIS 12812-2

Core banking -- Mobile Financial Services -- Part 2: Security and data protection for mobile financial services

Språk: enKommentarfrist: 2015-08-29

ISO/DIS 12812-3

Core Banking -- Mobile Financial Services -- Part 3: Financial application lifecycle management

Språk: enKommentarfrist: 2015-08-29

ISO/DIS 12812-4

Core Banking -- Mobile Financial Services -- Part 4: Mobile payments-to-person

Språk: enKommentarfrist: 2015-08-29

ISO/DIS 12812-5

Core Banking -- Mobile Financial Services -- Part 5: Mobile Payments to Business

Språk: enKommentarfrist: 2015-08-29

ISO/DIS 18587

Translation services -- Post-editing of machine translation output -- Requirements

Språk: enKommentarfrist: 2015-08-12

ISO-standarder

ISO 13810:2015

Tourism services -- Industrial tourism -- Service provision

Språk: en

ISO/TR 17185-3:2015

Intelligent transport systems -- Public transport user information -- Part 3: Use cases for journey planning systems and their interoperationSpråk: en

ISO/TR 17424:2015

Intelligent transport systems -- Cooperative systems -- State of the art of Local Dynamic Maps concepts

Språk: en

Listenummer: 11/2015 Side: 8 av 120

Page 9: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport

ISO/TS 17969:2015

Petroleum, petrochemical and natural gas industries -- Guidelines on competency for personnel

Språk: en

ISO/TS 18750:2015

Intelligent transport systems -- Cooperative systems -- Definition of a global concept for Local Dynamic Maps

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TR 17424:2015

Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015)

Språk: en

CEN ISO/TR 24014-2:2013

Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR 24014-2:2013)

Språk: en

CEN ISO/TR 24014-3:2013

Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)Språk: en

CEN ISO/TS 17419:2014

Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013)

Språk: en

CEN ISO/TS 17423:2014

Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013)

Språk: en

CEN ISO/TS 17427:2014

Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014)Språk: en

CEN ISO/TS 17444-2:2013

Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS 17444-2:2013)

Språk: en

CEN ISO/TS 18234-1:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS 18234-1:2013)Språk: en

CEN ISO/TS 18234-2:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013)Språk: en

CEN ISO/TS 18234-7:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS 18234-7.2013)Språk: en

Listenummer: 11/2015 Side: 9 av 120

Page 10: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport

CEN ISO/TS 18750:2015

Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015)

Språk: en

CEN/TR 10345:2013

Guideline for statistical data treatment of inter laboratory tests for validation of analytical methodsRetningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder

Språk: en

CEN/TR 15367-1:2014

Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuelsPetroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel

Språk: en

CEN/TR 16706:2014

Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report

Språk: en

CEN/TS 14014:2015

Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling

Språk: en

CEN/TS 15448:2014

Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)Språk: en

CEN/TS 16454:2013

Intelligent transport systems - ESafety - ECall end to end conformance testingIntelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (eCall)

Språk: en

CEN/TS 16555-1:2013

Innovation Management - Part 1: Innovation Management SystemInnovasjonsledelse - Del 1: System for innovasjonsledelse

Språk: en

CEN/TS 16555-2:2014

Innovation management - Part 2: Strategic intelligence management

Språk: en

CEN/TS 16555-3:2014

Innovation management - Part 3: Innovation thinking

Språk: en

CEN/TS 16555-4:2014

Innovation management - Part 4: Intellectual property management

Språk: en

CEN/TS 16555-5:2014

Innovation management - Part 5: Collaboration management

Språk: en

CEN/TS 16555-6:2014

Innovation management - Part 6: Creativity management

Språk: en

Listenummer: 11/2015 Side: 10 av 120

Page 11: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport

CEN/TS 16658:2014

Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperabilitySpråk: en

CEN/TS 16702-2:2015

Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder

Språk: en

CEN/TS 16735:2015

Postal services - Extensible Common Structure and Representation for Postal Rates - EPR

Språk: en

CEN/TS 419261:2015

Security requirements for trustworthy systems managing certificates and time-stamps

Språk: en

Fastsatte norske standarder

NS-EN 16636:2015

Pest management services - Requirements and competencesTjenester for skadedyrbekjemping - Krav og kompetanse

Språk: en

Tilbaketrukne norske standarder

NS-EN 9110:2010

Quality Management Systems - Requirements for Aviation Maintenance OrganizationsSystemer for kvalitetssikring - Krav til vedlikeholdsorganisasjoner innenfor luftfart

Språk: enIngen erstatning

07 Matematikk. Naturvitenskap

Standardforslag til høring - europeiske (CEN)

prEN 16870

Water quality - Guidance standard on determining the hydromorphological conditions of lakesVannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer

Språk: enKommentarfrist: 2015-09-07

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 10272-1

Microbiology of food and animal feed -- Horizontal method for detection and enumeration of Campylobacter -- Part 1: Detection method

Fôr- og næringsmiddelmikrobiologi – Horisontal metode for bestemmelse og telling av Campylobacter spp – Del 1: Bestemmelsesmetode

Språk: enKommentarfrist: 2015-07-05

ISO-standarder

ISO 18458:2015

Biomimetics -- Terminology, concepts and methodology

Språk: en

Listenummer: 11/2015 Side: 11 av 120

Page 12: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

07 Matematikk. Naturvitenskap

ISO 18459:2015

Biomimetics -- Biomimetic structural optimization

Språk: en

ISO/TS 17728:2015

Microbiology of the food chain -- Sampling techniques for microbiological analysis of food and feed samples

Språk: en

ISO/TS 80004-2:2015

Nanotechnologies -- Vocabulary -- Part 2: Nano-objects

Språk: enErstatter A00008:20:044278

Rapporter fra CEN (CR)

CEN ISO/TR 6579-3:2014

Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp. (ISO/TR 6579-3:2014)Språk: en

CEN ISO/TS 80004-1:2014

Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010)

Språk: en

CEN ISO/TS 80004-3:2014

Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010)

Språk: en

CEN ISO/TS 80004-4:2014

Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)

Språk: en

CEN ISO/TS 12025:2015

Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012)

Språk: en

CEN ISO/TS 13830:2013

Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013)

Nanoteknologi - Veiledning om frivillig merking av forbrukerprodukter som inneholder produserte nanoobjekter (ISO/TS 1380:2013)

Språk: en

CEN ISO/TS 15216-1:2013

Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 1: Method for quantification (ISO/TS 15216-1:2013, Corrected Version 2013-05-01)

Fôr- og nærimgsmiddelmikrobiologi – Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR – Del 1: Metode for kvantitative bestemmelse (ISO/DTS 15216-1:2012)

Språk: en

CEN ISO/TS 15216-2:2013

Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 2: Method for qualitative detection (ISO/TS 15216-2:2013, Corrected Version 2013-05-01)

Fôr- og nærimgsmiddelmikrobiologi – Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR – Del 2: Metode for kvalitativ bestemmelse (ISO/DTS 15216-2:2012)

Språk: en

CEN ISO/TS 17200:2015

Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013)

Språk: en

Listenummer: 11/2015 Side: 12 av 120

Page 13: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

07 Matematikk. Naturvitenskap

CEN ISO/TS 17919:2013

Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013)

Fôr-, miljø- og næringsmiddelmikrobiologi prøver - Polymerasekjedereaksjon (PCR) for påvisning av matbårne patogener – Bestemmelse av nevrotoksinproduserende clostridium type A, B, E og F (ISO/TS 17919:2013)

Språk: en

CEN ISO/TS 80004-6:2015

Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013)

Språk: en

CEN ISO/TS 80004-8:2015

Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013)

Språk: en

CEN/TR 15449-5:2015

Geographic information - Spatial data infrastructures - Part 5: Validation and testing

Språk: en

CEN/TR 16588:2014

Manual measurement of snow water equivalent

Språk: en

11 Helsevesen, Teknikk

Standardforslag til høring - europeiske (CEN)

EN ISO 21535:2009/prA1

Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants (ISO 21535:2007/DAM 1:2015)

Ikke-aktive kirurgiske implantater - Implantater til erstatning av ledd - Spesielle krav for hofteleddsimplantater (ISO21535:2007/DAM1:2015)

Språk: enKommentarfrist: 2015-08-07

prEN 16872

Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in HomeopathySpråk: enKommentarfrist: 2015-09-21

prEN ISO 1797

Dentistry - Shanks for rotary, oscillating and reciprocating instruments (ISO/DIS 1797:2015)Tannpleie - Skaft for roterende, vibrerende og stemplende instrumenter (ISO/DIS 1797:2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 5832-3 rev

Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO/DIS 5832-3:2015)

Kirurgiske implantater - Metalliske materialer - Del 3:Legering av smidd titan med 6 % aluminium og 4 % vanadium (ISO/DIS 5832-3:2015)

Språk: enKommentarfrist: 2015-06-25

Listenummer: 11/2015 Side: 13 av 120

Page 14: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

11 Helsevesen, Teknikk

prEN ISO 7199

Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO/DIS 7199:2015)Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere (oksygenatorer) (ISO/DIS 7199:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 7787-1 rev

Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO/DIS 7787-1:2015)Tannpleie - Laboratoriefresere - Del 1: Stålfresere til laboratoriebruk (ISO/DIS 7787-1:2015)

Språk: enKommentarfrist: 2015-07-09

prEN ISO 25539-1 rev

Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO/DIS 25539-1:2015)Kardiovaskulære implantater - Endovaskulært utstyr - Del 1: Endovaskulære proteser (ISO/DIS 25539-1:2015)

Språk: enKommentarfrist: 2015-07-23

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 1797

Dentistry -- Shanks for rotary, oscillating and reciprocating instruments

Språk: enKommentarfrist: 2015-09-13

ISO/DIS 7199

Cardiovascular implants and artificial organs - Blood-gas exchangersKardiovaskulære implantater og kunstige organer - Blodgassutvekslere

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 7787-1

Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters

Språk: enKommentarfrist: 2015-09-06

ISO/DIS 11040-8

Prefilled syringes -- Part 8: Requirements and test methods for finished prefilled syringes

Språk: enKommentarfrist: 2015-09-14

ISO/DIS 11608-7

Needle-based injection systems for medical use -- Requirements and test methods -- Part 7: Accessibility for persons with visual impairmentSpråk: enKommentarfrist: 2015-09-11

ISO/DIS 12870

Ophthalmic optics - Spectacle frames - Fundamental requirements and test methods

Språk: enKommentarfrist: 2015-09-11

ISO/DIS 15674

Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir system (with/without filter) and soft venous reservoir bagsSpråk: enKommentarfrist: 2015-08-01

Listenummer: 11/2015 Side: 14 av 120

Page 15: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

11 Helsevesen, Teknikk

ISO/DIS 15675

Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters

Språk: enKommentarfrist: 2015-08-01

ISO/DIS 15676

Cardiovascular implants and artificial organs -- Single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenationSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 18618

Dentistry -- Interoperability of CAD/CAM Systems

Språk: enKommentarfrist: 2015-09-11

ISO/DIS 25539-1

Cardiovascular implants -- Endovascular devices -- Part 1: Endovascular prostheses

Språk: enKommentarfrist: 2015-07-23

ISO/DIS 80601-2-74

Medical Electrical Equipment -- Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipmentSpråk: enKommentarfrist: 2015-09-03

ISO-standarder

ISO 16971:2015

Ophthalmic instruments -- Optical coherence tomograph for the posterior segment of the human eye

Språk: en

ISO 19045:2015

Ophthalmic optics -- Contact lens care products -- Method for evaluating Acanthamoeba encystment by contact lens care products

Språk: en

ISO/TR 80001-2-7:2015

Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1Språk: en

ISO/TS 17518:2015

Medical laboratories -- Reagents for staining biological material -- Guidance for users

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TS 13004:2014

Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013)Språk: en

CEN ISO/TS 16775:2014

Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014)Språk: en

Listenummer: 11/2015 Side: 15 av 120

Page 16: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

11 Helsevesen, Teknikk

CEN/TR 16824:2015

Early care services for babies born with cleft lip and/or palate

Språk: en

CEN/TS 16677:2014

Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel releaseØyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller

Språk: en

Fastsatte norske standarder

NS-EN 1865-2:2010+A1:2015

Patient handling equipment used in road ambulances - Part 2: Power assisted stretcherUtstyr til å bære pasienter til bruk i veiambulanser - Del 2: Bårer med elektrisk motor

Språk: en

NS-EN 1865-3:2012+A1:2015

Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcherBårer og bæreutstyr til bruk i veiambulanser - Del 3: Båre for tung last

Språk: en

NS-EN 13718-2:2015

Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulancesAmbulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser

Språk: en

NS-EN 16442:2015

Controlled environment storage cabinet for processed thermolabile endoscopesSkap med kontrollert miljø for oppbevaring av behandlede termolabilie endoskop

Språk: en

NS-EN 45502-2-2:2008

Active implantable medical devices - Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)

Aktivt implanterbart medisinsk utstyr - Del 2-2: Særskilte krav til aktivt implanterbart medisinsk utstyr beregnet på behandling av takykardi (omfatter implanterbare defibrillatorer)

Språk: en

NS-EN ISO 5356-1:2015

Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015)Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Hann- og hunnkoner (ISO 5356-1:2015)

Språk: en

NS-EN ISO 9687:2015

Dentistry - Graphical symbols for dental equipment (ISO 9687:2015)Tannpleie - Grafiske symboler for utstyr (ISO 9687:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 1865-2:2010

Patient handling equipment used in road ambulances - Part 2: Power assisted stretcherUtstyr til å bære pasienter til bruk i veiambulanser - Del 2: Bårer med elektrisk motor

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 16 av 120

Page 17: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

11 Helsevesen, Teknikk

NS-EN 1865-3:2012

Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcherBårer og bæreutstyr til bruk i veiambulanser - Del 3: Båre for tung last

Språk: enIngen erstatning

NS-EN 13718-2:2008

Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements of air ambulancesAmbulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser

Språk: enIngen erstatning

NS-EN ISO 5356-1:2004

Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004)Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Han- og hunkoner (ISO 5356-1:2004)

Språk: enIngen erstatning

NS-EN ISO 9687:1995

Dental equipment - Graphical symbols (ISO 9687:1993)Tannpleie - Grafiske symboler for utstyr (ISO 9687:1993)

Språk: enIngen erstatning

13 Miljøvern. Helsevern. Sikkerhet

Standardforslag til høring - europeiske (CEN)

EN ISO 389-7:2005/prA1

Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions (ISO 389-7:2005/DAmd 1:2015)

Endringsblad 1: Referansehøreterskel ved 20 Hz og 18 000 Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust felt-forhold

Språk: enKommentarfrist: 2015-08-07

EN ISO 8041:2005/prA1:2015

Human response to vibration - Measuring instrumentation - Amendment 1 (ISO 8041:2005/DAM 1:2015)Menneskets respons på vibrasjoner - Måleutstyr - Endringsblad 1 (ISO 8041:2005/DAM 1:2015)

Språk: enKommentarfrist: 2015-06-25

prEN 13204 rev

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirementsDobbeltvirkende hydrauliske redningsverktøy for brann og redningstjenestebruk - Sikkerhets- og ytelseskrav

Språk: enKommentarfrist: 2015-07-19

prEN 14582

Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methodsKarakterisering av avfall - Halogen- og svovelinnhold - Bestemmelsesmetoder for oksygenforbrenning i lukkede systemer

Språk: enKommentarfrist: 2015-07-26

Listenummer: 11/2015 Side: 17 av 120

Page 18: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

prEN 14944-1

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters

Påvirkning av sementliknende produkter på vann tiltenkt human konsumpsjon - Test metoder - Del 1: Innflytelse av migrasjone fra fabrikkprodusert sementliknende podukter på organoleptiske parametere

Språk: enKommentarfrist: 2015-08-02

prEN 14944-1 rev

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parametersSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3

Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious productsSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3 rev

Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious productsSpråk: enKommentarfrist: 2015-08-02

prEN 16516

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air

Språk: enKommentarfrist: 2015-09-21

prEN 16785-2

Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method

Språk: enKommentarfrist: 2015-07-26

prEN 16848

Bio-based products - Template for B2B reporting and communication of characteristics - Data sheetBiobaserte produkter - Templat for B2B rapportering og kommunikasjon av karakteristikker - Dataark

Språk: enKommentarfrist: 2015-07-05

prEN 16856

Portable aerosol dispenser for fire extinguishing purposes

Språk: enKommentarfrist: 2015-08-31

prEN 16859

Water quality - Guidance standard on monitoring freshwater pearl mussel (margaritifera margaritifera) populations and their environment

Vannundersøkelse – Veiledning for overvåking av elvemusling populasjoner (Margaritifera margaritifera) og deres livsmiljø

Språk: enKommentarfrist: 2015-09-07

prEN 16870

Water quality - Guidance standard on determining the hydromorphological conditions of lakesVannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer

Språk: enKommentarfrist: 2015-09-07

Listenummer: 11/2015 Side: 18 av 120

Page 19: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

prEN ISO 374-1

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO/DIS 374-1:2015)Språk: enKommentarfrist: 2015-07-16

prEN ISO 374-5

Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organism risks (ISO/DIS 374-5:2015)Språk: enKommentarfrist: 2015-07-16

prEN ISO 7029 rev

Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO/DIS 7029:2015)Akustikk - Statistisk fordeling av høreterskler som funksjon av alder (ISO/DIS 7029:2015)

Språk: enKommentarfrist: 2015-08-21

prEN ISO 15012-4

Health and safety in welding and allied processes - Equipment for capture and separation of fume - Part 4: General requirements (ISO/DIS 15012-4:2015)Språk: enKommentarfrist: 2015-06-30

Standardforslag til høring - internasjonale (ISO)

ISO 389-7:2005/DAmd 1

Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions

Endringsblad 1: Referansehøreterskel ved 20 Hz og 18 000 Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust felt-forhold

Språk: enKommentarfrist: 2015-08-07

ISO 8041:2005/DAmd 1

Menneskets respons på vibrasjoner - Måleutstyr - Endringsblad 1 (ISO 8041:2005/DAM 1:2015)Språk: enKommentarfrist: 2015-06-25

ISO 14835-1:2005/DAmd 1

Mekaniske vibrasjoner og støt - Kuldeprovokasjonsprøving for vurdering av perifer vaskulær funksjon - Del 1: Måling og vurdering av temperatur på huden på fingeren - Endringsblad 1Språk: enKommentarfrist: 2015-09-24

ISO/DIS 374-1

Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risksSpråk: enKommentarfrist: 2015-09-13

ISO/DIS 374-5

Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risksSpråk: enKommentarfrist: 2015-09-13

Listenummer: 11/2015 Side: 19 av 120

Page 20: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

ISO/DIS 1996-2

Acoustics -- Description, assessment and measurement of environmental noise -- Part 2: Determination of environmental noise levels

Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø

Språk: enKommentarfrist: 2015-08-26

ISO/DIS 1996-2

Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levelsSpråk: enKommentarfrist: 2015-10-23

ISO/DIS 7029

Acousticx - Statistical distribution of hearing thresholds as a function of ageAkustikk - Statistisk fordeling av høreterskler som funksjon av alder

Språk: enKommentarfrist: 2015-08-06

ISO/DIS 7029

Acoustics - Statistical distribution of hearing thresholds related to age and genderAkustikk - Statistisk fordeling av høreterskler som funksjon av alder

Språk: enKommentarfrist: 2015-10-03

ISO/DIS 7243

Ergonomics of the thermal environment -- Assessment of heat stress using the WBGT (wet bulb globe temperature) index

Språk: enKommentarfrist: 2015-09-11

ISO/DIS 12219-6

Interior air of road vehicles -- Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature -- Small chamber methodSpråk: enKommentarfrist: 2015-08-16

ISO/DIS 12402-2

Personal flotation devices -- Part 2: Lifejackets, performance level 275 -- Safety requirements

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 12402-3

Personal flotation devices -- Part 3: Lifejackets, performance level 150 -- Safety requirements

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 12402-4

Personal flotation devices -- Part 4: Lifejackets, performance level 100 -- Safety requirements

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 12402-5

Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements

Språk: enKommentarfrist: 2015-11-01

Listenummer: 11/2015 Side: 20 av 120

Page 21: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

ISO/DIS 12402-7

Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 12402-7

Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 12402-8

Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 12402-9

Personal flotation devices -- Part 9: Test methods

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 12402-2

Personal flotation devices - Part 2: Class B (offshore lifejackets, extreme conditions - 275N), safety requirements

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 12402-3

Personal flotation devices - Part 3: Class C (offshore lifejackets, extreme conditions - 150N), safety requirements

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 12402-4

Personal flotation devices - Part 4: Class D (inland/close to shore lifejackets - 100 N), safety requirements

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 12402-5

Personal flotation devices - Part 5: Class E, (buoyance aids - 50 N), safety requirements

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 12402-8

Personal flotation devices - Part 8: Additional items, safety requirements and test methods

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 12402-9

Personal flotation devices - Part 9: Test methods for classes A to F

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 13073-3

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal processSpråk: enKommentarfrist: 2015-07-31

Listenummer: 11/2015 Side: 21 av 120

Page 22: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

ISO/DIS 14004

Environmental management systems -- General guidelines on principles, systems and support techniques

Språk: enKommentarfrist: 2015-07-12

ISO/DIS 14034

Environmental management -- Environmental technology verification (ETV)

Språk: enKommentarfrist: 2015-10-29

ISO/DIS 15011-1

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysisSpråk: enKommentarfrist: 2015-07-05

ISO/DIS 17179

Stationary source emissions -- Determination of the mass concentration of ammonia in flue gas -- Performance characteristics of automated measuring systemsSpråk: enKommentarfrist: 2015-08-22

ISO/DIS 18079-1

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 1: General

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 18079-3

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 3: Inflatable lifejackets

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 24516-1

Guidelines for Management of Assets of water supply and wastewater systems -- Part 1: Drinking water distribution networks

Språk: enKommentarfrist: 2015-08-01

ISO/DIS 37101

Sustainable development of communities -- Management systems -- Requirements with guidance for resilience and smartnessBærekraftig utvikling av samfunn -- Styringssystemer -- Krav med veiledning for motstandsdyktighet og smarthet

Språk: enKommentarfrist: 2015-08-30

ISO-standarder

ISO 11999-1:2015

PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 1: GeneralSpråk: enErstatter A00008:20:060185

ISO 11999-3:2015

PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 3: ClothingSpråk: enErstatter A00008:20:060187

Listenummer: 11/2015 Side: 22 av 120

Page 23: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

ISO 11999-4:2015

PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 4: GlovesSpråk: enErstatter A00008:20:060191

ISO 12312-2:2015

Eye and face protection -- Sunglasses and related eyewear -- Part 2: Filters for direct observation of the sun

Språk: en

ISO 13164-4:2015

Water quality -- Radon-222 -- Part 4: Test method using two-phase liquid scintillation counting

Språk: en

ISO 16505:2015

Road vehicles -- Ergonomic and performance aspects of Camera Monitor Systems -- Requirements and test procedures

Språk: en

ISO/TR 22100-1:2015

Safety of machinery -- Relationship with ISO 12100 -- Part 1: How ISO 12100 relates to type-B and type-C standards

Språk: en

ISO/TS 11999-2:2015

PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 2: CompatibilitySpråk: en

ISO/TS 16976-2:2015

Respiratory protective devices -- Human factors -- Part 2: Anthropometrics

Språk: enErstatter A00008:20:042762,A00008:20:060692

ISO/TS 37151:2015

Smart community infrastructures -- Principles and requirements for performance metrics

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TR 12296:2013

Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012)

Språk: en

CEN ISO/TS 29843-1:2014

Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010)Språk: en

CEN ISO/TR 9241-331:2013

Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012)

Språk: en

CEN ISO/TS 9241-411:2014

Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012)Språk: en

Listenummer: 11/2015 Side: 23 av 120

Page 24: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

CEN ISO/TS 14067:2014

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013)Språk: en

CEN ISO/TS 29843-2:2014

Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011, Corrected version 2012-02-01)Språk: en

CEN/TR 13205-3:2014

Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency dataSpråk: en

CEN/TR 15350:2013

Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery

Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter

Språk: en

CEN/TR 16193:2013

Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli

Språk: en

CEN/TR 16394:2014

Characterization of sludges - Protocol for preparing synthetic suspensions

Språk: en

CEN/TR 16394:2014/AC:2015

Characterization of sludges - Protocol for preparing synthetic suspensions

Språk: en

CEN/TR 16456:2013

Characterization of sludges - Good practice of sludge dewateringKarakterisering av slam – Veiledning for avvanning av slam

Språk: en

CEN/TR 16663:2014

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field methodSpråk: en

CEN/TR 16705:2014

Perimeter protection - Performance classification methodology

Språk: en

CEN/TR 16721:2014

Bio-based products - Overview of methods to determine the bio-based contentBiobaserte produkter - Oversikt over metoder for å bestemme biobasert innhold

Språk: en

CEN/TR 16788:2014

Characterization of sludges - Guideline of good practice for thermal processes

Språk: en

Listenummer: 11/2015 Side: 24 av 120

Page 25: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

CEN/TR 16832:2015

Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)Språk: en

CEN/TS 1948-5:2015

Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBsSpråk: en

CEN/TS 13649:2014

Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption

Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon

Språk: en

CEN/TS 15937:2013

Sludge, treated biowaste and soil - Determination of specific electrical conductivitySlam, behandlet organisk avfall og jord - Bestemmelse av spesifikk elektrisk konduktivitet

Språk: en

CEN/TS 15989:2015

Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings

Språk: en

CEN/TS 16023:2013

Characterization of waste - Determination of gross calorific value and calculation of net calorific value

Språk: en

CEN/TS 16181:2013

Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)Språk: en

CEN/TS 16201:2013

Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules

Språk: en

CEN/TS 16202:2013

Sludge, treated biowaste and soil - Determination of impurities and stones

Språk: en

CEN/TS 16450:2013

Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)Luftundersøkelse - Uteluft - Automatiserte målesystemer til måling av svevestøvkonsentrasjonen (PM10, PM2,5)

Språk: en

CEN/TS 16459:2013

External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187

Språk: en

CEN/TS 16516:2013

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor airByggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft

Språk: en

Listenummer: 11/2015 Side: 25 av 120

Page 26: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

CEN/TS 16524:2013

Mechanical products - Methodology for reduction of environmental impacts in product design and developmentMekaniske produkter - Ecodesign metodikk

Språk: en

CEN/TS 16595:2013

CBRN - Vulnerability Assessment and Protection of People at Risk

Språk: en

CEN/TS 16637-1:2014

Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps

Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger

Språk: en

CEN/TS 16637-2:2014

Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching testByggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving

Språk: en

CEN/TS 16640:2014

Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method

Språk: en

CEN/TS 16645:2014

Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]peryleneSpråk: en

CEN/TS 16660:2015

Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity

Karakterisering av avfall - Prøving av utlekkingsegenskaper –Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten

Språk: en

CEN/TS 16675:2014

Characterisation of waste - Test methods for the determination of the monolithic status of waste

Språk: en

CEN/TS 16692:2015

Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry

Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i hele vannprøver ved hjelp av fastfaseekstraksjon (SPE) og gasskromatografi med trippel kvadrupol-massespektrometri

Språk: en

CEN/TS 16861:2015

Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)

Språk: en

Fastsatte norske standarder

NS-EN 54-27:2015

Fire detection and fire alarms systems - Part 27: Duct smoke detectorsBrannalarmanlegg - Del 27: Røykdetektorer for kanaler

Språk: en

Listenummer: 11/2015 Side: 26 av 120

Page 27: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

NS-EN 12972:2015

Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanksTanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker

Språk: en

NS-EN 14429:2015

Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base additionKarakterisering av avfall - Prøving av utlekkingsegenskaper - Innvirkning fra pH på utlekking ved initial syre/basetilsetting

Språk: en

NS-EN 14533:2015

Textiles and textile products - Burning behaviour of bedding items - Classification schemeTekstiler og tekstilprodukter - Brennbarheten til sengetøy - Klassifiseringsskjema

Språk: en

NS-EN 14997:2015

Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH controlKarakterisering av avfall - Prøving av utlekkingsegenskaper - Innvirkning fra pH på utlekking med kontinuerlig pH-kontroll

Språk: en

NS-EN 16523-1:2015

Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact

Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier - Del 1: Gjennomtrenging av flytende kjemikalier som er i kontinuerlig kontakt med materialer

Språk: en

NS-EN 16523-2:2015

Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact

Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier - Del 2: Gjennomtrenging av kjemikalier i gassform som er i kontinuerlig kontakt med materialer

Språk: en

NS-EN 16623:2015

Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking

Maling og lakk - Reaktive belegg for brannbeskyttelse av metalliske underlag - Definisjoner, krav, egenskaper og merking

Språk: en

Tilbaketrukne norske standarder

NS-EN 133:2001

Respiratory protective devices - ClassificationÅndedrettsvern - Klassifikasjon

Språk: enIngen erstatning

NS-EN 374-3:2003

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals - (Corrigendum AC:2006 incorporated)

Vernehansker mot kjemikalier og mikroorganismer - Del 3: Bestemmelse av motstand mot molekylær gjennomtrengning av kjemikalier - (innbefattet rettelsesblad AC:2006)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 27 av 120

Page 28: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

13 Miljøvern. Helsevern. Sikkerhet

NS-EN 12972:2007

Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanksTanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker

Språk: enIngen erstatning

NS-EN 14533:2003

Textiles and textile products - Burning behaviour of bedding items - Classification schemeTekstiler og tekstilprodukter - Brennbarheten til sengetøy - Klassifiseringsskjema

Språk: enIngen erstatning

NS-EN 14806:2005

Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test

Emballasje - Foreløpig vurdering av oppløsningen av emballasjematerialer under simulerte komposteringsbetingelser ved prøving i laboratorium

Språk: enIngen erstatning

NS-ISO/TS 14067:2013

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communicationKlimagasser - Produkters klimaspor - Krav og retningslinjer for kvantifisering og kommunikasjon

Språk: enIngen erstatning

17 Metrologi og måling. Fysiske fenomener

Standardforslag til høring - europeiske (CEN)

prEN ISO 1101

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015)

Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering, plassering og kjøre ut (ISO/DIS 1011: 2014)

Språk: enKommentarfrist: 2015-08-25

prEN 1793-1

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditionsSpråk: enKommentarfrist: 2015-09-14

prEN ISO 1101

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015)

Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering , plassering og utkjøring ( ISO/DIS 1101 : 2015 )

Språk: enKommentarfrist: 2015-08-25

prEN ISO 25178-72

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO/DIS 25178-72:2015)Geometriske produktspesifikasjoner (GPS) - Overflatebeskaffenhet: Areal - Del 72: XML-filformat x3p (ISO/DIS 25178-72: 2015)

Språk: enKommentarfrist: 2015-07-16

Listenummer: 11/2015 Side: 28 av 120

Page 29: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

17 Metrologi og måling. Fysiske fenomener

Standardforslag til høring - internasjonale (ISO)

ISO 16063-21:2003/DAmd 1

Metoder for kalibrering av støt- og vibrasjonstransdusere - Del 21: Vibrasjonskalibrering ved sammenligning med referansetransduser - Endringsblad 1Språk: enKommentarfrist: 2015-08-04

ISO/DIS 1101.2

Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out

Språk: enKommentarfrist: 2015-10-25

ISO/DIS 1996-2

Acoustics -- Description, assessment and measurement of environmental noise -- Part 2: Determination of environmental noise levels

Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø

Språk: enKommentarfrist: 2015-08-26

ISO/DIS 1996-2

Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levelsSpråk: enKommentarfrist: 2015-10-23

ISO/DIS 5458

Technical drawings - Geometrical tolerancing - Positional tolerancing (Revision of first edition ISO 5458:1987)

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 5458

Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional and pattern tolerancing

Språk: enKommentarfrist: 2015-11-01

ISO/DIS 9296.2

Acoustics -- Declared noise emission values of information technology and telecommunications equipmentAkustikk - Deklarerte verdier for støyemisjon fra informasjonsteknologi og telekommunikasjon

Språk: enKommentarfrist: 2015-08-14

ISO/DIS 13373-9

Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors

Tilstandsovervåking og diagnostikk av maskiner – Vibrasjonsovervåking – Del 3: Diagnostikkteknikk for elektriske motorer

Språk: enKommentarfrist: 2015-09-25

ISO/DIS 13374-4

Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation

Tilstandsovervåking og diagnostikk av maskiner - Databehandling, kommunikasjon og presentasjon - Del 4: Presentasjon

Språk: enKommentarfrist: 2015-09-14

Listenummer: 11/2015 Side: 29 av 120

Page 30: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

17 Metrologi og måling. Fysiske fenomener

ISO/DIS 14405-3.2

Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 3: Angular sizes

Språk: enKommentarfrist: 2015-08-04

ISO/DIS 17450-4

Geometrical product specification (GPS) -- Basic concepts -- Part 4: Geometrical characteristics for quantifying form, orientation, location and run-out deviationSpråk: enKommentarfrist: 2015-09-04

ISO/DIS 25178-71

Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 71: Software measurement standards

Språk: enKommentarfrist: 2015-09-04

ISO/DIS 25178-72

Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 72: XML file format x3p

Språk: enKommentarfrist: 2015-09-13

ISO-standarder

ISO 13164-4:2015

Water quality -- Radon-222 -- Part 4: Test method using two-phase liquid scintillation counting

Språk: en

ISO 17123-8:2015

Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 8: GNSS field measurement systems in real-time kinematic (RTK)Språk: enErstatter A00008:20:042213

ISO 20361:2015

Liquid pumps and pump units -- Noise test code -- Grades 2 and 3 of accuracy

Språk: enErstatter A00008:20:034165

ISO/TR 9212:2015

Hydrometry -- Methods of measurement of bedload discharge

Språk: enErstatter A00008:20:040460

Rapporter fra CEN (CR)

CEN ISO/TS 8062-2:2013

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)Språk: en

CEN ISO/TS 15530-1:2013

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)Språk: en

CEN/TR 10345:2013

Guideline for statistical data treatment of inter laboratory tests for validation of analytical methodsRetningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder

Språk: en

Listenummer: 11/2015 Side: 30 av 120

Page 31: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

17 Metrologi og måling. Fysiske fenomener

Fastsatte norske standarder

NS-EN 1793-4:2015

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction

Innretninger for reduksjon av vegtrafikkstøy - Prøvingsmetode for bestemmelse av akustiske egenskaper - Del 4: Produktspesifikke egenskaper - In situ-verdier av lyddiffraksjon

Språk: en

NS-EN 14462:2015

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert hjelpeutstyr - Nøyaktighetsgrad 2 og 3

Språk: en

NS-EN 45501:2015

Metrological aspects of non-automatic weighing instrumentsMetrologiske aspekter ved ikke-automatisk veieutstyr

Språk: en

NS-EN ISO 23771:2015

Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015)Tekstilmaskiner - Veiledning til utforming av tekstilmaskiner for reduksjon av støy (ISO 23771:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 14462:2005+A1:2009

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert dets hjelpeutstyr - Nøyaktighetsgrad 2 og 3

Språk: enIngen erstatning

19 Prøving

Standardforslag til høring - europeiske (CEN)

prEN ISO 4545-2

Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 4545-2:2015)Metalliske materialer - Knoop hardhetsprøving - Del 2: Verifikasjon og kalibrering av prøvingsmaskiner (ISO/DIS 4545-2: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 4545-3

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO/DIS 4545-3:2015)Metalliske materialer - Knoop hardhetsprøving - Del 3: Kalibrering av referanseblokker (ISO/DIS 4545-3: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 5577

Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2015)

Språk: enKommentarfrist: 2015-07-31

Listenummer: 11/2015 Side: 31 av 120

Page 32: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

19 Prøving

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 5577

Non-destructive testing - Ultrasonic inspection - Vocabulary

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 5577

Non-destructive testing -- Ultrasonic testing -- Vocabulary

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 19430

Determination of particle size distribution -- Particle tracking analysis

Språk: enKommentarfrist: 2015-08-14

ISO-standarder

ISO 18249:2015

Non-destructive testing -- Acoustic emission testing -- Specific methodology and general evaluation criteria for testing of fibre-reinforced polymersSpråk: en

Rapporter fra CEN (CR)

CEN/TR 15589:2014

Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/ECSpråk: en

CEN/TR 16638:2014

Non-destructive testing - Penetrant and magnetic particle testing using blue light

Språk: en

CEN/TS 16637-1:2014

Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps

Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger

Språk: en

CEN/TS 16637-2:2014

Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching testByggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving

Språk: en

21 Mekaniske systemer og komponenter til allmenn bruk

Standardforslag til høring - europeiske (CEN)

prEN 12080

Railway applications - Axleboxes - Rolling bearingsJernbane - Akselkasser - Rullelagre

Språk: enKommentarfrist: 2015-08-09

Listenummer: 11/2015 Side: 32 av 120

Page 33: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

21 Mekaniske systemer og komponenter til allmenn bruk

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 3245.3

Rolling bearings -- Needle roller bearings with drawn cup and without inner ring -- Boundary dimensions, geometrical product specifications (GPS) and tolerance valuesSpråk: enKommentarfrist: 2015-08-09

ISO/DIS 6336-5

Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials

Språk: enKommentarfrist: 2015-09-24

ISO/DIS 6336-5

Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials

Språk: enKommentarfrist: 2015-07-28

ISO/DIS 15242-1

Rolling bearings -- Measuring methods for vibration -- Part 1: Fundamentals

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 15242-2

Rolling bearings -- Measuring methods for vibration -- Part 2: Radial ball bearings with cylindrical bore and cylindrical outside surfaceSpråk: enKommentarfrist: 2015-06-29

ISO/DIS 15242-2

Rolling bearings -- Measuring methods for vibration -- Part 2: Radial ball bearings with cylindrical bore and outside surface

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 15242-1

Rolling bearings -- Measuring methods for vibration -- Part 1: Fundamentals

Språk: enKommentarfrist: 2015-06-29

ISO/DIS 21940-12

Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviourMekaniske vibrasjoner - Rotoravbalansering – Del 12: Prosedyrer og toleranser for fleksible rotorer

Språk: enKommentarfrist: 2015-08-01

Fastsatte norske standarder

NS-EN 14399-1:2015

High-strength structural bolting assemblies for preloading - Part 1: General requirementsHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 1: Generelle krav

Språk: en

NS-EN 14399-2:2015

High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloadingHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 2: Egnethetsprøving for forspenning

Språk: en

Listenummer: 11/2015 Side: 33 av 120

Page 34: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

21 Mekaniske systemer og komponenter til allmenn bruk

NS-EN 14399-3:2015

High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 3: System HR - Sekskantskrue- og mutterforbindelser

Språk: en

NS-EN 14399-4:2015

High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 4: System HV - Sekskantskrue- og mutterforbindelser

Språk: en

NS-EN 14399-5:2015

High-strength structural bolting assemblies for preloading - Part 5: Plain washersHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 5: Underlagsskiver

Språk: en

NS-EN 14399-6:2015

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washersHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 6: Skråfasede underlagsskiver

Språk: en

Tilbaketrukne norske standarder

NS-EN 14399-1:2005

High-strength structural bolting assemblies for preloading - Part 1: General requirementsHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 1: Generelle krav

Språk: enIngen erstatning

NS-EN 14399-2:2005

High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloadingHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 2: Egnethetsprøving for forspenning

Språk: enIngen erstatning

NS-EN 14399-3:2005

High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 3: System HR - Sekskantskrue- og mutterforbindelser

Språk: enIngen erstatning

NS-EN 14399-4:2005

High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 4: System HV - Sekskantskrue -og mutterforbindelser

Språk: enIngen erstatning

NS-EN 14399-5:2005

High-strength structural bolting assemblies for preloading - Part 5: Plain washers - (Corrigendum AC:2006 incorporated)

Høyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 5: Underlagsskiver for system HR - (innbefattet rettelsesblad AC:2006)

Språk: enIngen erstatning

NS-EN 14399-6:2005

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers - (Corrigendum AC:2006 incorporated)

Høyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 6: Skråfasede underlagsskiver for system HR og HV - (innbefattet rettelsesblad AC:2006)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 34 av 120

Page 35: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

21 Mekaniske systemer og komponenter til allmenn bruk

23 Hydrauliske systemer og komponenter til allmenn bruk

Standardforslag til høring - europeiske (CEN)

EN 13445-2:2014/prA1

Unfired pressure vessels - Part 2: MaterialsIkke-fyrte trykkbeholdere - Del 2: Materialer

Språk: enKommentarfrist: 2015-09-14

prEN 736-2

Valves - Terminology - Part 2: Definition of components of valvesVentiler - Terminologi - Del 2: Definisjon av komponenter av ventiler

Språk: enKommentarfrist: 2015-09-07

prEN 1503-4

Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European StandardsVentiler - Materialer for hus og deksler - Del 4: Kobberlegeringer spesifisert i europeiske standarder

Språk: enKommentarfrist: 2015-09-07

prEN 10255

Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methodsUlegerte stålrør egnet for sveising, gjenging og andre sammenføyningsmetoder - Krav og prøvingsmetoder

Språk: enKommentarfrist: 2015-08-23

prEN 10255

Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methodsUlegerte stålrør egnet for sveising, gjenging og andre sammenføyningsmetoder - Krav og prøvingsmetoder

Språk: enKommentarfrist: 2015-08-23

prEN ISO 6134 rev

Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:2015)Gummislanger og slanger med koblinger for mettet damp - Krav (ISO/DIS 6134:2015)

Språk: enKommentarfrist: 2015-06-25

prEN ISO 6803 rev

Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO/DIS 6803:2015)Slanger og slangeforbindelser av gummi eller plast - Prøving av hydrauliske trykkstøt uten bøying (ISO/DIS 6803:2015)

Språk: enKommentarfrist: 2015-07-09

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 6134

Rubber hoses and hose assemblies for saturated steam - Specification

Språk: enKommentarfrist: 2015-06-25

ISO/DIS 6803

Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure impulse test without flexing

Språk: enKommentarfrist: 2015-07-09

Listenummer: 11/2015 Side: 35 av 120

Page 36: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

23 Hydrauliske systemer og komponenter til allmenn bruk

ISO/DIS 7121

Metal ball valves for general-purpose industrial applications

Språk: enKommentarfrist: 2015-09-16

ISO/DIS 11943

Hydraulic fluid power - On-line liquid automatic particle-counting systems - Methods of calibration and validation

Språk: enKommentarfrist: 2015-09-12

ISO/DIS 21007-2

Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identificationSpråk: enKommentarfrist: 2015-07-19

ISO-standarder

ISO 3601-5:2015

Fluid power systems -- O-rings -- Part 5: Specification of elastomeric materials for industrial applications

Språk: enErstatter A00008:20:031580

ISO 3723:2015

Hydraulic fluid power -- Filter elements -- Method for end load test

Språk: enErstatter A00008:20:009203

ISO 5208:2015

Industrial valves -- Pressure testing of metallic valves

Språk: enErstatter A00008:20:043239

ISO 5802:2001/Amd 1:2015

Språk: en

ISO 10762:2015

Hydraulic fluid power -- Mounting dimensions for cylinders, 10 MPa (100 bar) series

Språk: enErstatter A00008:20:022766

ISO 15848-1:2015

Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 1: Classification system and qualification procedures for type testing of valvesSpråk: enErstatter A00008:20:029242

ISO 15848-2:2015

Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 2: Production acceptance test of valvesSpråk: enErstatter A00008:20:031170

ISO 18413:2015

Hydraulic fluid power -- Cleanliness of components -- Inspection document and principles related to contaminant extraction and analysis, and data reportingSpråk: enErstatter A00008:20:031795

Listenummer: 11/2015 Side: 36 av 120

Page 37: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

23 Hydrauliske systemer og komponenter til allmenn bruk

ISO 20361:2015

Liquid pumps and pump units -- Noise test code -- Grades 2 and 3 of accuracy

Språk: enErstatter A00008:20:034165

Rapporter fra CEN (CR)

CEN/TR 1046:2013

Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installationSpråk: en

CEN/TR 13445-101:2015

Unfired pressure vessels - Example of application

Språk: en

CEN/TR 13445-102:2015

Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket supports

Språk: en

CEN/TR 14473:2014

Transportable gas cylinders - Porous materials for acetylene cylinders

Språk: en

CEN/TR 16470:2013

Environmental aspects of ductile iron pipe systems for water and sewerage applicationsMiljøaspekt av seigjern rørsystemer for vann og avløp aspektapplikasjoner

Språk: en

CEN/TR 16626:2014

Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures

Språk: en

CEN/TR 16787:2014

Industrial Gas Installation - Guideline

Språk: en

CEN/TS 12201-7:2014

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformitySpråk: en

CEN/TS 14541:2013

Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials

Språk: en

CEN/TS 14578:2013

Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation

Rørledningssystemer av plast for vannforsyning og avløp - Glassfiberarmert herdeplast (GRP) basert på umettet polyesterharpiks (UP) - Installasjonsveiledning

Språk: en

CEN/TS 14807:2013

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

Rørledningssystemer – Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) – Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger

Språk: en

Listenummer: 11/2015 Side: 37 av 120

Page 38: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

23 Hydrauliske systemer og komponenter til allmenn bruk

CEN/TS 16650:2014

Specification for hose couplings for petrol, oil and lubricants - High pressure couplings

Språk: en

CEN/TS 16765:2015

LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards

Språk: en

CEN/TS 16769:2015

LPG equipment and accessories - Terminology

Språk: en

Fastsatte norske standarder

NS-EN 12972:2015

Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanksTanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker

Språk: en

NS-EN 13445-3:2014/A1:2015

Amendment A1 - Unfired pressure vessels - Part 3: DesignEndringsblad A1 - Ikke-fyrte trykkbeholdere - Del 3: Konstruksjon

Språk: en

NS-EN 13765:2010+A1:2015

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

Flersjikts (ikke-vulkaniserte) slanger og slanger med koblinger av termoplast for transport av hydrokarboner, løsemidler og kjemikalier - Krav

Språk: en

NS-EN 13953:2015

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)LPG-utstyr og tilbehør - Sikkerhetsventiler for transportable påfyllbare flasker for flytende petroleumsgass (LPG)

Språk: en

NS-EN 14912:2015

LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylindersLPG-utstyr og tilbehør - Inspeksjon og vedlikehold av LPG-flaskeventiler ved periodisk kontroll av flasker

Språk: en

NS-EN ISO 3459:2015

Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015)

Rørledninger av plast - Mekaniske skjøter mellom rørdeler og trykkrør - Metode for prøving av tetthet ved undertrykk (ISO 3459:2015)

Språk: en

NS-EN ISO 3501:2015

Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2015)

Rørledninger av plast - Mekaniske skjøter mellom rørdeler og trykkrør - Prøvingsmetode for motstand mot uttrekking ved konstant kraft i lengderetningen (ISO 3501:2015)

Språk: en

Listenummer: 11/2015 Side: 38 av 120

Page 39: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

23 Hydrauliske systemer og komponenter til allmenn bruk

NS-EN ISO 3503:2015

Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)

Rørledninger av plast - Mekaniske skjøter mellom rørdeler og trykkrør - Prøvingsmetode for tetthet under innvendig trykk i sammenføyninger utsatt for bøying (ISO 3503:2015)

Språk: en

NS-EN ISO 11011:2015

Compressed air - Energy efficiency - Assessment (ISO 11011:2013)Trykkluft - Energieffektivitet - Vurdering (ISO 11011:2013)

Språk: en

NS-EN ISO 11120:2015

Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)

Gassflasker - Påfyllbare sømløse stålsylindre med vannkapasitet mellom 150 I og 3000 I - Konstruksjon, tilvirkning og prøving (ISO 11120:2015)

Språk: en

NS-EN ISO 13844:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)

Rørledninger av plast - Muffeforbindelser med elastomeriske tetningsringer for trykkrør av plast - Metode for prøving av tetthet ved undertrykk, avbøying og deformasjon (ISO 13844:2015)

Språk: en

NS-EN ISO 17778:2015

Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)

Rørledninger av plast - Rørdeler, ventiler og tilbehør - Bestemmelse av forholdet mellom gasstrømtetthet og trykkfall (ISO 17778:2015)

Språk: en

NS-EN ISO 25760:2015

Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)Gassflasker - Driftsprosedyrer for sikker fjerning av ventiler fra gassflasker (ISO 25760:2009)

Språk: en

Tilbaketrukne norske standarder

NS-EN 712:1993

Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force

Rørledninger av termoplast - Strekkfaste mekaniske skjøter mellom trykkrør og rørdeler - Prøvingsmetode for motstand mot uttrekking ved konstant kraft

Språk: enIngen erstatning

NS-EN 713:1993

Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

Rørledninger av plast - Mekaniske skjøter mellom rørdeler og trykkrør av polyolefiner - Metode for tetthetsprøving under innvendig trykk og bøying

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 39 av 120

Page 40: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

23 Hydrauliske systemer og komponenter til allmenn bruk

NS-EN 911:1995

Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure

Rørledninger av plast - Skjøter med elastomeriske tetningsringer og mekaniske skjøter for trykkledninger av termoplast - Metode for tetthetsprøving ved hydrostatisk utvendig trykk

Språk: no/enIngen erstatning

NS-EN 12117:1997

Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationshipsRørledninger av plast - Rørdeler, ventiler og tilbehør - Bestemmelse av forholdet mellom gasstrømtetthet og trykkfall

Språk: enIngen erstatning

NS-EN 12972:2007

Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanksTanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker

Språk: enIngen erstatning

NS-EN 13765:2010

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

Flersjikts (ikke-vulkaniserte) slanger og slanger med koblinger av termoplast for transport av hydrokarboner, løsemidler og kjemikalier - Krav

Språk: enIngen erstatning

NS-EN 13953:2003+A1:2007

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)LPG-utstyr og tilbehør - Sikkerhetsventiler for transportable påfyllbare flasker for flytende petroleumsgass (LPG)

Språk: enIngen erstatning

NS-EN 14912:2005

LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylindersLPG-utstyr og tilbehør - Inspeksjon og vedlikehold av LPG-flaskeventiler ved periodisk kontroll av flasker

Språk: enIngen erstatning

NS-EN ISO 11120:1999

Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing (ISO 11120:1999)

Gassflasker - Påfyllbare sømløse gassrør for transport av komprimert gass med vannkapasitet mellom 150 l og 3000 l - Konstruksjon, tilvirkning og prøving (ISO 11120:1999)

Språk: enIngen erstatning

NS-EN ISO 11120:1999/A1:2013

Amendment A1 - Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing - Amendment 1: Requirements for design of tubes for embrittling gases (ISO 11120:1999/Amd 1:2013)

Endringsblad A1 - Gassflasker - Påfyllbare sømløse stålrør for transport av komprimert gass med vannkapasitet mellom 150 l og 3000 l - Konstruksjon, tilvirkning og prøving - Endringsblad 1: Krav til konstruksjon av rør for gasser som forårsaker materialsprøhet (ISO 11120:1999/Amd 1:2013)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 40 av 120

Page 41: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

25 Produksjonsteknikk

Standardforslag til høring - europeiske (CEN)

prEN 16866

Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)Språk: enKommentarfrist: 2015-09-21

prEN ISO 3210

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO/DIS 3210:2015)Språk: enKommentarfrist: 2015-08-14

prEN ISO 3677

Filler metal for soldering and brazing - Designation (ISO/DIS 3677:2015)

Språk: enKommentarfrist: 2015-08-07

prEN ISO 15012-4

Health and safety in welding and allied processes - Equipment for capture and separation of fume - Part 4: General requirements (ISO/DIS 15012-4:2015)Språk: enKommentarfrist: 2015-06-30

prEN ISO 15012-4

Health and safety in welding and allied processes - Equipment for capture and separation of fume - Part 4: General requirements (ISO/DIS 15012-4:2015)Språk: enKommentarfrist: 2015-06-30

prEN ISO 15614-1 rev

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/DIS 15614-1:2013)

Spesifisering og godkjenning av sveiseprosedyrer for metalliske materialer - Sveiseprosedyreprøving - Del 1: Bue- og gassveising av stål og buesveising av nikkel og nikkellegeringe (ISO/DIS 15614-1:2013)

Språk: enKommentarfrist: 2015-07-14

prEN ISO 15614-1

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/DIS 15614-1:2015)

Spesifisering og godkjenning av sveiseprosedyrer for metalliske materialer - Sveiseprosedyreprøving - Del 1: Bue- og gassveising av stål og buesveising av nikkel og nikkellegeringer (ISO/DIS 15614-1:2015)

Språk: enKommentarfrist: 2015-07-14

prEN ISO 18276

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO/DIS 18276:2015)Språk: enKommentarfrist: 2015-07-02

Standardforslag til høring - internasjonale (ISO)

ISO 21538:2004/DAmd 1

Språk: enKommentarfrist: 2015-08-04

Listenummer: 11/2015 Side: 41 av 120

Page 42: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

ISO/DIS 3210

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solutionSpråk: enKommentarfrist: 2015-08-14

ISO/DIS 3210

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)Språk: enKommentarfrist: 2015-10-11

ISO/DIS 3581

Welding consumables -- Covered electrodes for manual metal arc welding of stainless and heat-resisting steels -- Classification

Språk: enKommentarfrist: 2015-08-09

ISO/DIS 3677

Filler metal for soft soldering, brazing and braze welding -- Designation

Språk: enKommentarfrist: 2015-08-07

ISO/DIS 5182

Resistance welding -- Materials for electrodes and ancillary equipment

Språk: enKommentarfrist: 2015-07-19

ISO/DIS 8502-9

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

Forbehandling av stål før påføring av maling og beslektede produkter - Prøvinger for å vurdere overflaterenhet - Del 9: Feltmetode for bestemmelse av vannløslige salter ved konduktivitetsmåling

Språk: enKommentarfrist: 2015-07-12

ISO/DIS 10656

Resistance welding equipment -- Transformers -- Integrated transformers for welding guns

Språk: enKommentarfrist: 2015-08-14

ISO/DIS 15011-1

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysisSpråk: enKommentarfrist: 2015-07-05

ISO/DIS 15012-4.2

Health and safety in welding and allied processes -- Equipment for capture and separation of fume -- Part 4: General requirements

Språk: enKommentarfrist: 2015-06-30

ISO/DIS 15614-1.2

Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloysSpråk: enKommentarfrist: 2015-07-14

Listenummer: 11/2015 Side: 42 av 120

Page 43: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

ISO/DIS 17635

Non-destructive examination of welds - General rules for metallic materials

Språk: enKommentarfrist: 2015-09-11

ISO/DIS 17635

Non-destructive testing of welds -- General rules for metallic materials -- Complementary element

Språk: enKommentarfrist: 2015-11-08

ISO/DIS 17637

Non-destructive testing of welds -- Visual testing of fusion-welded joints

Språk: enKommentarfrist: 2015-08-09

ISO/DIS 17638

Non-destructive testing of welds -- Magnetic particle testing

Språk: enKommentarfrist: 2015-08-09

ISO/DIS 17662

Welding -- Calibration, verification and validation of equipment used for welding, including ancillary activities

Språk: enKommentarfrist: 2015-07-05

ISO/DIS 17672

Brazing -- Filler metals

Språk: enKommentarfrist: 2015-08-09

ISO/DIS 18276

Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of high strength steels -- ClassificationSpråk: enKommentarfrist: 2015-07-02

ISO/DIS 18276

Welding consumables -- Tubular cored electrodes for gas-shielded and non-gasshielded metal arc welding of highstrength steels -- ClassificationSpråk: enKommentarfrist: 2015-08-30

ISO/DIS 22917

Superabrasives -- Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride

Slipeprodukter laget av diamant og kubisk bornitrid – Tillatt avvik og løpenøyaktighet for slipeskiver med diamant og kubisk bornitrid.

Språk: enKommentarfrist: 2015-08-09

ISO/DIS 22917

Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride

Språk: enKommentarfrist: 2015-11-06

Listenummer: 11/2015 Side: 43 av 120

Page 44: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

ISO-standarder

ISO 230-7:2015

Test code for machine tools -- Part 7: Geometric accuracy of axes of rotation

Språk: enErstatter A00008:20:035838

ISO 3317:2015

Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches

Språk: enErstatter A00008:20:044749

ISO 7738:2015

Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads

Språk: enErstatter A00008:20:026670

ISO/TR 18491:2015

Welding and allied processes -- Guidelines for measurement of welding energies

Språk: en

ISO/TS 15926-11:2015

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 11: Methodology for simplified industrial usage of reference dataSpråk: en

Rapporter fra CEN (CR)

CEN ISO/TR 14745:2015

Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015)

Språk: en

CEN/TR 13259:2013

Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes

Språk: en

CEN/TR 15339-1:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirementsTermisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 1: Generelle krav

Språk: en

CEN/TR 15339-3:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units

Termisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 3: Fakler for termisk sprøyting og deres tilknytning og strømforsyninger

Språk: en

CEN/TR 15339-4:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supplyTermisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 4: Gass og flytende brenselforsyning

Språk: en

CEN/TR 15339-5:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed unitsTermisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 5: Pulver og trådmating enheter

Språk: en

Listenummer: 11/2015 Side: 44 av 120

Page 45: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

CEN/TR 15339-6:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter

Termisk sprøyting - Sikkerhetkrav for termisk sprøyteutstyr - Del 6: Spraykabinett, Håndteringssystem, Støvinnsamling, Utmattende system, Filter

Språk: en

CEN/TS 16599:2014

Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditionsSpråk: en

Fastsatte norske standarder

NS-EN 14462:2015

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert hjelpeutstyr - Nøyaktighetsgrad 2 og 3

Språk: en

NS-EN ISO 4528:2015

Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015)

Overflater av glaserte emaljer og porselensemaljer - Valg av prøvingsmetoder for produktområder med overflater av glaserte emaljer og porselensemaljer (ISO 4528:2015)

Språk: en

NS-EN ISO 10447:2015

Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015)

Motstandssveising - Prøving av sveiser - Avrivnings- og meiselprøving av motstandspunktsveising og knastsveising (ISO 10447:2015)

Språk: en

NS-EN ISO 14323:2015

Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015)

Motstandssveising - Destruktiv prøving av sveiser - Prøvestykkedimensjoner og prosedyrer for skårslagseighetsprøving og strekkprøving på tvers av valseretning for motstandspunktsveiser og knastsveiser (ISO 14323:2015)

Språk: en

NS-EN ISO 14373:2015

Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015)Motstandssveising - Framgangsmåte for punktsveising av ubelagte og belagte lavkarbonstål (ISO 14373:2015)

Språk: en

NS-EN ISO 23277:2015

Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)Ikke-destruktiv prøving av sveiser - Penetrantprøving - Akseptnivåer (ISO 23277:2015)

Språk: en

NS-EN ISO 23278:2015

Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)Ikke-destruktiv prøving av sveiser - Magnetpulverprøving - Akseptnivåer (ISO 23278:2015)

Språk: en

Listenummer: 11/2015 Side: 45 av 120

Page 46: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

Tilbaketrukne norske standarder

NS-EN 12584:1999

Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - TerminologyUregelmessigheter i skjæreflater ved oksygenbrenngass, laserstråle og plasmaskjæring - Terminologi

Språk: enIngen erstatning

NS-EN 14462:2005+A1:2009

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert dets hjelpeutstyr - Nøyaktighetsgrad 2 og 3

Språk: enIngen erstatning

NS-EN ISO 4528:2009

Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2000)

Overflater av glaserte emaljer og porselensemaljer - Valg av prøvingsmetoder for produktområder med overflater av glaserte emaljer og porselensemaljer (ISO 4528:2000)

Språk: enIngen erstatning

NS-EN ISO 10447:2007

Resistance welding - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2006)Motstandssveising - Avrivning- og meiselprøving av motstandspunktsveising og knastsveising (ISO 10447:2006)

Språk: enIngen erstatning

NS-EN ISO 14323:2006

Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006)

Motstandspunktsveising og knastsveising - Destruktiv prøving av sveiser - Prøvestykkedimensjoner og prosedyrer for skårslagseighetsprøving og strekkprøving på tvers av valseretning (ISO 14323:2006)

Språk: enIngen erstatning

NS-EN ISO 14373:2007

Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2006)Motstandssveising - Framgangsmåte for punktsveising av ubelagte og belagte lavkarbonstål (ISO 14373:2006)

Språk: enIngen erstatning

NS-EN ISO 23277:2009

Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)Ikke-destruktiv prøving av sveis - Penetrantprøving av sveis - Akseptnivåer (ISO 23277:2006)

Språk: noIngen erstatning

NS-EN ISO 23277:2009

Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)Ikke-destruktiv prøving av sveis - Penetrantprøving av sveis - Akseptnivåer (ISO 23277:2006)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 46 av 120

Page 47: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

25 Produksjonsteknikk

NS-EN ISO 23278:2009

Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)Ikke-destruktiv prøving av sveis - Magnetpulverprøving av sveis - Akseptnivåer (ISO 23278:2006)

Språk: noIngen erstatning

NS-EN ISO 23278:2009

Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)Ikke-destruktiv prøving av sveis - Magnetpulverprøving av sveis - Akseptnivåer (ISO 23278:2006)

Språk: enIngen erstatning

27 Energi- og varmeoverføringsteknikk

Standardforslag til høring - europeiske (CEN)

prEN 15316-4-10

Heating systems and water based cooling systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems

Varmesystemer og vannbaserte kjølesystemer i bygninger - Metode for beregning av systemets energikrav og systemvirkningsgrader - Del 4-10: Systemer for vindkraftgeneratorer

Språk: enKommentarfrist: 2015-07-19

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 11424

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification

Språk: enKommentarfrist: 2015-08-13

ISO/DIS 17741.2

General technical rules for measurement, calculation and verification of energy savings of projects

Språk: enKommentarfrist: 2015-08-31

ISO/DIS 17747

Determination of energy savings in organizations

Språk: enKommentarfrist: 2015-09-24

ISO/DIS 18846

Solid biofuels -- Determination of fines content in quantities of pelletsSolid biobrensel -- Bestemmelse av finfraksjon innhold i mengde pellets

Språk: enKommentarfrist: 2015-09-06

ISO-standarder

ISO 14084-2:2015

Process diagrams for power plants -- Part 2: Graphical symbols

Språk: en

Listenummer: 11/2015 Side: 47 av 120

Page 48: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

27 Energi- og varmeoverføringsteknikk

Rapporter fra CEN (CR)

CEN/TS 16214-2:2014

Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance

Bærekraftig fremstilt biomasse til energianvendelser – Prinsipper, kriterier, indikatorer og påvisere for for biodrivstoff og biovæsker (bioliquids) – Del 2: Samsvarsvurdering inkludert overvåkingsskjede og massebalanse

Språk: en

Fastsatte norske standarder

NS-EN 45510-2-9:2008

Guide for procurement of power station equipment - Part 2-9: Electrical equipment - Cabling systemsRetningslinjer for anskaffelse av kraftstasjonsutstyr - Del 2-9: Elektrisk utstyr - Kablingssystemer

Språk: en

NS-EN ISO 16995:2015

Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)Fast biobrensel - Bestemmelse av vannløselig klor-, natrium- og kaliuminnhold (ISO 16995:2015)

Språk: en

29 Elektroteknikk

Standardforslag til høring - europeiske (CEN)

prEN 16840

Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz and at least 250 AInnlandsfartøyer - Elektrisk shore tilkobling, tre-fase strøm 400 V, 50 Hz og minst 250 A

Språk: enKommentarfrist: 2015-07-19

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 10656

Resistance welding equipment -- Transformers -- Integrated transformers for welding guns

Språk: enKommentarfrist: 2015-08-14

31 Elektronikk

ISO-standarder

ISO 11151-2:2015

Lasers and laser-related equipment -- Standard optical components -- Part 2: Components for the infrared spectral range

Språk: enErstatter A00008:20:022246

Listenummer: 11/2015 Side: 48 av 120

Page 49: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

33 Telekommunikasjon. Lyd- og videoteknikk

33 Telekommunikasjon. Lyd- og videoteknikk

ISO-standarder

ISO 11451-1:2015

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminologySpråk: enErstatter A00008:20:037998,A00008:20:045932

ISO 11451-2:2015

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sourcesSpråk: enErstatter A00008:20:037999

ISO 11451-3:2015

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulationSpråk: enErstatter A00008:20:037439

ISO 11452-1:2015

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminologySpråk: enErstatter A00008:20:038001,A00008:20:045933

ISO 11452-8:2015

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fieldsSpråk: enErstatter A00008:20:040831

Rapporter fra CEN (CR)

CEN/TR 16671:2014

Information technology - Authorization of mobile phones when used as RFID interrogatorsInformasjonsteknologi - Autorisasjon av mobiltelefoner når de brukes som RFID-sendere-mottakere

Språk: en

35 Informasjonsteknologi. Kontormaskiner

Standardforslag til høring - europeiske (CEN)

prEN 12896-1

Public transport - Reference data model - Part 1: Common conceptsKollektivtransport - Referansedatamodell - Del 1: Allmenne begrep

Språk: enKommentarfrist: 2015-06-25

prEN 12896-2

Road Transport and Traffic Telematics - Public Transport Reference Data Model - Part 2: Public Transport NetworkKollektivtransport - Referansedatamodell - Del 2: Linjenett for kollektivtransport

Språk: enKommentarfrist: 2015-06-25

Listenummer: 11/2015 Side: 49 av 120

Page 50: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

35 Informasjonsteknologi. Kontormaskiner

prEN 12896-3

Intelligent transport systems - Reference data model - Part 3: Timing information and vehicle schedulingKollektivtransport - Referansedatamodell - Del 3: Vognløpsplanlegging

Språk: enKommentarfrist: 2015-06-25

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 9296.2

Acoustics -- Declared noise emission values of information technology and telecommunications equipmentAkustikk - Deklarerte verdier for støyemisjon fra informasjonsteknologi og telekommunikasjon

Språk: enKommentarfrist: 2015-08-14

ISO/DIS 9564-1

Banking - Personal Identification Number mangement and security - Part 1: PIN protection principles and techniques [Revision of first edition (ISO 9564-1:1991)]Språk: enKommentarfrist: 2015-09-15

ISO/DIS 13374-4

Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation

Tilstandsovervåking og diagnostikk av maskiner - Databehandling, kommunikasjon og presentasjon - Del 4: Presentasjon

Språk: enKommentarfrist: 2015-09-14

ISO/DIS 18587

Translation services -- Post-editing of machine translation output -- Requirements

Språk: enKommentarfrist: 2015-08-12

ISO/DIS 19119

Geographic information -- Services

Språk: enKommentarfrist: 2015-08-09

ISO-standarder

ISO/TR 12310:2015

Health informatics -- Principles and guidelines for the measurement of conformance in the implementation of terminological systems

Språk: en

ISO/TR 17185-3:2015

Intelligent transport systems -- Public transport user information -- Part 3: Use cases for journey planning systems and their interoperationSpråk: en

ISO/TR 17424:2015

Intelligent transport systems -- Cooperative systems -- State of the art of Local Dynamic Maps concepts

Språk: en

ISO/TR 80001-2-7:2015

Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1Språk: en

Listenummer: 11/2015 Side: 50 av 120

Page 51: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

35 Informasjonsteknologi. Kontormaskiner

ISO/TS 16277-1:2015

Health informatics -- Categorial structures of clinical findings in traditional medicine -- Part 1: Traditional Chinese, Japanese and Korean medicineSpråk: en

ISO/TS 18750:2015

Intelligent transport systems -- Cooperative systems -- Definition of a global concept for Local Dynamic Maps

Språk: en

ISO/TS 18790-1:2015

Health informatics -- Profiling framework and classification for Traditional Medicine informatics standards development -- Part 1: Traditional Chinese MedicineSpråk: en

ISO/TS 19321:2015

Intelligent transport systems -- Cooperative ITS -- Dictionary of in-vehicle information (IVI) data structures

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TR 9241-331:2013

Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012)

Språk: en

CEN ISO/TR 17424:2015

Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015)

Språk: en

CEN ISO/TR 24014-2:2013

Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR 24014-2:2013)

Språk: en

CEN ISO/TR 24014-3:2013

Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)Språk: en

CEN ISO/TS 9241-411:2014

Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012)Språk: en

CEN ISO/TS 14265:2013

Health Informatics - Classification of purposes for processing personal health information (ISO/TS 14265:2011)

Språk: en

CEN ISO/TS 14441:2013

Health informatics - Security and privacy requirements of EHR systems for use in conformity assessment (ISO/TS 14441:2013)

Språk: en

CEN ISO/TS 17419:2014

Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013)

Språk: en

Listenummer: 11/2015 Side: 51 av 120

Page 52: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

35 Informasjonsteknologi. Kontormaskiner

CEN ISO/TS 17423:2014

Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013)

Språk: en

CEN ISO/TS 17427:2014

Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014)Språk: en

CEN ISO/TS 17444-2:2013

Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS 17444-2:2013)

Språk: en

CEN ISO/TS 18234-1:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS 18234-1:2013)Språk: en

CEN ISO/TS 18234-2:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013)Språk: en

CEN ISO/TS 18234-7:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS 18234-7.2013)Språk: en

CEN ISO/TS 18234-9:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 9: Traffic event compact (TPEG1-TEC) (ISO/TS 18234-9:2013)Språk: en

CEN ISO/TS 18234-10:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 10: Conditional access information (TPEG1-CAI) (ISO/TS 18234-10:2013)Språk: en

CEN ISO/TS 18750:2015

Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015)

Språk: en

CEN ISO/TS 19321:2015

Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structure (ISO/TS 19321:2015)

Språk: en

CEN/TR 15449-4:2013

Geographic information - Spatial Data Infrastructure - Part 4: Service centric view

Språk: en

CEN/TR 15449-5:2015

Geographic information - Spatial data infrastructures - Part 5: Validation and testing

Språk: en

CEN/TR 15872:2014

Health informatics - Guidance on patient identification and cross-referencing of identities

Språk: en

Listenummer: 11/2015 Side: 52 av 120

Page 53: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

35 Informasjonsteknologi. Kontormaskiner

CEN/TR 16669:2014

Information technology - Device interface to support ISO/IEC 18000-3Informasjonsteknologi - Enhetsgrensesnitt som støtter ISO/IEC 18000-3

Språk: en

CEN/TR 16670:2014

Information technology - RFID threat and vulnerability analysisInformasjonsteknologi - Analyse av trussel og sårbarhet for RFID

Språk: en

CEN/TR 16671:2014

Information technology - Authorization of mobile phones when used as RFID interrogatorsInformasjonsteknologi - Autorisasjon av mobiltelefoner når de brukes som RFID-sendere-mottakere

Språk: en

CEN/TR 16672:2014

Information technology - Privacy capability features of current RFID technologiesInformasjonsteknologi - Ytelsesegenskaper for personvern for gjeldende RFID-teknologier

Språk: en

CEN/TR 16673:2014

Information technology - RFID privacy impact assessment analysis for specific sectorsInformasjonsteknologi - Analyse av vurdering av personvernkonsekvenser ved RFID for spesifikke sektorer

Språk: en

CEN/TR 16674:2014

Information technology - Analysis of privacy impact assessment methodologies relevant to RFIDInformasjonsteknologi - Analyse av metoder for vurdering av personvernkonsekvenser som er relevante for RFID

Språk: en

CEN/TR 16684:2014

Information technology - Notification of RFID - Additional information to be provided by operatorsInformasjonsteknologi - Varsling av RFID - Tilleggsinformasjon som skal gis av operatører

Språk: en

CEN/TR 16690:2014

Electronic fee collection - Guidelines for EFC applications based on in-vehicle ITS stations

Språk: en

CEN/TR 16742:2014

Intelligent transport systems - Privacy aspects in ITS standards and systems in Europe

Språk: en

CEN/TS 13149-8:2013

Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communicationKollektivtransport - Ruteplanleggings- og kontrollsystemer for kjøretøy - Del 8: Fysisk lag for IP-kommunikasjon

Språk: en

CEN/TS 14014:2015

Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling

Språk: en

CEN/TS 15448:2014

Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)Språk: en

Listenummer: 11/2015 Side: 53 av 120

Page 54: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

35 Informasjonsteknologi. Kontormaskiner

CEN/TS 15480-3:2014

Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interfaceIdentitetskortsystem - Europeisk borgerkort - Del 3: Europeisk borgerkort interoperabilitet vedhjelp av applikasjonsgrensesnitt

Språk: en

CEN/TS 15480-5:2013

Identification card systems - European Citizen Card - Part 5: General IntroductionIdentitetskortsystem - Europeisk borgerkort - Del 5: Generell introduksjon

Språk: en

CEN/TS 16080:2013

Internet Content and communications filtering software and services

Språk: en

CEN/TS 16157-4:2014

Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 4: Variable Message Sign (VMS) PublicationsSpråk: en

CEN/TS 16157-5:2014

Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publicationsSpråk: en

CEN/TS 16454:2013

Intelligent transport systems - ESafety - ECall end to end conformance testingIntelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (eCall)

Språk: en

CEN/TS 16614-1:2014

Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format

Kollektivtransport - Utvekslingsformat for nettverks- og tidtabelldata (NeTEx) - Del 1: Utveksling av data for nettverks- og rutestruktur

Språk: en

CEN/TS 16614-2:2014

Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Public transport scheduled timetables exchange formatKollektivtransport - Utvekslingsformat for nettverks- og tidtabelldata (NeTEx) - Del 2: Utveksling av tidtabell- og vognløpsdata

Språk: en

CEN/TS 16634:2014

Personal identification - Recommendations for using biometrics in European Automated Border ControlPersonlig identifikasjon - Anbefalinger for bruk av biometri i europeisk automatisert grensekontrollsystem

Språk: en

CEN/TS 16658:2014

Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperabilitySpråk: en

CEN/TS 16685:2014

Information technology - Notification of RFID - The information sign to be displayed in areas where RFID interrogators are deployedInformasjonsteknologi - Varsling av RFID - Informasjonssignalet som skal vises i områder der det brukes RFID-sendere-mottakere

Språk: en

CEN/TS 16702-1:2014

Electronic fee collection - Secure monitoring for autonomous toll systems - Part 1: Compliance checkingElektronisk avgiftsinnkreving - Sikker overvåking av autonome bomsystemer - Del 1: Samsvarskontroll

Språk: en

Listenummer: 11/2015 Side: 54 av 120

Page 55: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

35 Informasjonsteknologi. Kontormaskiner

CEN/TS 16702-2:2015

Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder

Språk: en

CEN/TS 16794-1:2015

Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443Språk: en

CEN/TS 16794-2:2015

Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443

Språk: en

CEN/TS 419241:2014

Security Requirements for Trustworthy Systems Supporting Server SigningSikkerhetskrav - Tillitssystemer som støtter serversignering

Språk: en

CEN/TS 419261:2015

Security requirements for trustworthy systems managing certificates and time-stamps

Språk: en

37 Bildeteknikk

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 12632

Graphic technology -- Ink, paper and labels -- Requirements on hot alkali penetration and resistance

Språk: enKommentarfrist: 2015-07-06

ISO-standarder

ISO 2939:2015

Cinematography -- Picture image area on 35 mm motion-picture release prints -- Position and dimensions and analogue and digital photographic sound to picture record displacementSpråk: enErstatter A00008:20:035511

ISO 2969:2015

Cinematography -- B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres -- Specifications and measurementsSpråk: enErstatter A00008:20:008023

ISO 8036:2015

Microscopes -- Immersion liquids for light microscopy

Språk: enErstatter A00008:20:039399

ISO 9022-11:2015

Optics and photonics -- Environmental test methods -- Part 11: Mould growth

Språk: enErstatter A00008:20:016576

Listenummer: 11/2015 Side: 55 av 120

Page 56: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

37 Bildeteknikk

ISO 9022-12:2015

Optics and photonics -- Environmental test methods -- Part 12: Contamination

Språk: enErstatter A00008:20:016577

ISO 9022-14:2015

Optics and photonics -- Environmental test methods -- Part 14: Dew, hoarfrost, ice

Språk: enErstatter A00008:20:016579

ISO 9022-17:2015

Optics and photonics -- Environmental test methods -- Part 17: Combined contamination, solar radiation

Språk: enErstatter A00008:20:016582

ISO 10109:2015

Optics and photonics -- Guidance for the selection of environmental tests

Språk: enErstatter A00008:20:063139

ISO 15781:2015

Photography -- Digital still cameras -- Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time

Språk: enErstatter A00008:20:051326

ISO 17850:2015

Photography -- Digital cameras -- Geometric distortion (GD) measurements

Språk: en

ISO 17957:2015

Photography -- Digital cameras -- Shading measurements

Språk: en

ISO 19012-3:2015

Microscopes -- Designation of microscope objectives -- Part 3: Spectral transmittance

Språk: en

43 Kkjøretøyteknikk

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 6621-1

Internal combustion engines -- Piston rings -- Part 1: Vocabulary

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 6621-1

Internal combustion engines -- Piston rings -- Part 1: Vocabulary

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 6624-1

Internal combustion engines -- Piston rings -- Part 1: Keystone rings made of cast iron

Språk: enKommentarfrist: 2015-09-07

Listenummer: 11/2015 Side: 56 av 120

Page 57: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

43 Kkjøretøyteknikk

ISO/DIS 6624-3

Internal combustion engines -- Piston rings -- Part 3: Keystone rings made of steel

Språk: enKommentarfrist: 2015-09-07

ISO/DIS 6624-1

Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron (Revision of first edition (ISO 6624-1:1986)

Språk: enKommentarfrist: 2015-07-10

ISO/DIS 6624-3

Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel

Språk: enKommentarfrist: 2015-07-10

ISO/DIS 6626-3

Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded and nitrided oil control rings made of steel

Språk: enKommentarfrist: 2015-07-10

ISO/DIS 6626-3

Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded oil control rings made of steel

Språk: enKommentarfrist: 2015-09-07

ISO/DIS 12103-1

Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust

Språk: enKommentarfrist: 2015-09-15

ISO/DIS 12219-6

Interior air of road vehicles -- Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature -- Small chamber methodSpråk: enKommentarfrist: 2015-08-16

ISO/DIS 12619-4

Road vehicles -- Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends fuel system components -- Part 4: Check ValveSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 12619-5

Road vehicles -- Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends fuel system components -- Part 5: Manual cylinder valveSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 13775-2

Thermoplastic hoses and tubing for automotive use - Part 2: Petroleum-based-fuel applications

Språk: enKommentarfrist: 2015-08-19

ISO/DIS 16332

Diesel engines -- Fuel filters -- Method for evaluating fuel/water separation efficiency

Språk: enKommentarfrist: 2015-09-11

Listenummer: 11/2015 Side: 57 av 120

Page 58: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

43 Kkjøretøyteknikk

ISO-standarder

ISO 3006:2015

Road vehicles -- Passenger car wheels for road use -- Test methods

Språk: enErstatter A00008:20:039420

ISO 3537:2015

Road vehicles -- Safety glazing materials -- Mechanical tests

Språk: enErstatter A00008:20:029023

ISO 6550-1:1994

Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 1: M14 x 1,25 glow-plugs

Språk: enErstatter A00008:20:012946

ISO 6550-2:1994

Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 2: M12 x 1,25 glow-plugs

Språk: enErstatter A00008:20:012946

ISO 6742-1:2015

Cycles -- Lighting and retro-reflective devices -- Part 1: Lighting and light signalling devices

Språk: enErstatter A00008:20:013204

ISO 6742-2:2015

Cycles -- Lighting and retro-reflective devices -- Part 2: Retro-reflective devices

Språk: enErstatter A00008:20:013207

ISO 6742-3:2015

Cycles -- Lighting and retro-reflective devices -- Part 3: Installation and use of lighting and retro-reflective devices

Språk: en

ISO 6742-4:2015

Cycles -- Lighting and retro-reflective devices -- Part 4: Lighting systems powered by the cycle's movement

Språk: en

ISO 6742-5:2015

Cycles -- Lighting and retro-reflective devices -- Part 5: Lighting systems not powered by the cycle's movement

Språk: en

ISO 8820-5:2015

Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

Språk: enErstatter A00008:20:035381

ISO 8820-10:2015

Road vehicles -- Fuse-links -- Part 10: Fuse-links with tabs Type L (high current miniature)

Språk: en

ISO 11451-1:2015

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminologySpråk: enErstatter A00008:20:037998,A00008:20:045932

Listenummer: 11/2015 Side: 58 av 120

Page 59: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

43 Kkjøretøyteknikk

ISO 11451-2:2015

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sourcesSpråk: enErstatter A00008:20:037999

ISO 11451-3:2015

Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulationSpråk: enErstatter A00008:20:037439

ISO 11452-1:2015

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminologySpråk: enErstatter A00008:20:038001,A00008:20:045933

ISO 11452-8:2015

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fieldsSpråk: enErstatter A00008:20:040831

ISO 15118-3:2015

Road vehicles -- Vehicle to grid communication interface -- Part 3: Physical and data link layer requirements

Språk: en

ISO 16505:2015

Road vehicles -- Ergonomic and performance aspects of Camera Monitor Systems -- Requirements and test procedures

Språk: en

ISO 17447-1:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugsSpråk: enErstatter A00008:20:020089,A00008:20:020090,A00008:20:042942,A00008:20:043934,A00008:20:050144,A00008:20:059787

ISO 17447-2:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugsSpråk: enErstatter A00008:20:020089,A00008:20:020090,A00008:20:042942,A00008:20:043934,A00008:20:050144,A00008:20:059787

ISO 17447-3:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 3: Tests and requirements

Språk: enErstatter A00008:20:020089,A00008:20:020090,A00008:20:042942,A00008:20:043934,A00008:20:050144

ISO/TR 12349-2:2015

Road vehicles -- Dummies for restraint system testing -- Part 2: Child dummies

Språk: enErstatter A00008:20:030149

ISO/TS 19321:2015

Intelligent transport systems -- Cooperative ITS -- Dictionary of in-vehicle information (IVI) data structures

Språk: en

Listenummer: 11/2015 Side: 59 av 120

Page 60: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

43 Kkjøretøyteknikk

Rapporter fra CEN (CR)

CEN ISO/TS 19321:2015

Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structure (ISO/TS 19321:2015)

Språk: en

CEN/TR 16596:2013

Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs)

Språk: en

CEN/TS 13149-8:2013

Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communicationKollektivtransport - Ruteplanleggings- og kontrollsystemer for kjøretøy - Del 8: Fysisk lag for IP-kommunikasjon

Språk: en

CEN/TS 16635:2014

Railway application - Design for PRM Use - Equipment and Components onboard Rolling Stock - ToiletsJernbane - Utforming for funksjonshemmede - Utstyr og komponenter ombord på rullende materiell - Toaletter

Språk: en

Fastsatte norske standarder

NS-EN 15429-3:2015

Sweepers - Part 3: Efficiency of particulate matter collection - Testing and EvaluationFeiemaskiner - Del 3: Evne til oppsamling av partikkelstøv - Prøving og evaluering

Språk: en

NS-EN 15429-4:2015

Sweepers - Part 4: Symbols for operator controls and other displaysFeiemaskiner - Del 4: Symboler for kontrollpaneler og andre skjermer

Språk: en

45 Jernbaneteknikk

Standardforslag til høring - europeiske (CEN)

prEN 12080

Railway applications - Axleboxes - Rolling bearingsJernbane - Akselkasser - Rullelagre

Språk: enKommentarfrist: 2015-08-09

prEN 12082

Railway applications - Axleboxes - Performance testingJernbane - Akselkasser - Prøving av ytelse

Språk: enKommentarfrist: 2015-08-09

prEN 13103-1

Railway applications - Wheelsets and bogies - Part 1: Design guide for axles with external journals

Språk: enKommentarfrist: 2015-09-21

Listenummer: 11/2015 Side: 60 av 120

Page 61: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

45 Jernbaneteknikk

prEN 13715

Railway applications - Wheelsets and bogies - Wheels - Tread profileJernbane - Hjulsett og boggier - Hjul - Kantprofil

Språk: enKommentarfrist: 2015-07-19

prEN 16186-2

Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators

Språk: enKommentarfrist: 2015-08-16

prEN 16186-2

Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators

Språk: enKommentarfrist: 2015-08-16

prEN 16860

Railway Applications - Requirements and general principles for securing payload in rail freight transport

Språk: enKommentarfrist: 2015-08-23

Fastsatte norske standarder

NS-EN 12930:2015

Safety requirements for cableway installations designed to carry persons - CalculationsSikkerhetskrav for taubaneinstallasjoner for persontransport - Beregninger

Språk: en

NS-EN 13243:2015

Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systemsSikkerhetskrav for taubaneinstallasjoner for persontransport - Elektrisk utstyr til annet enn drivsystemer

Språk: en

NS-EN 14752:2015

Railway applications - Body side entrance systems for rolling stockJernbane - Sidedørsystemer for rullende materiell

Språk: en

Tilbaketrukne norske standarder

NS-EN 12930:2004

Safety requirements for cableway installations designed to carry persons - CalculationsSikkerhetskrav for taubaneinstallasjoner for persontransport - Beregninger

Språk: enIngen erstatning

NS-EN 13243:2004

Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems (Corrigendum AC:2005 incorporated)

Sikkerhetskrav for taubaneinstallasjoner for persontransport - Elektrisk utstyr til annet enn drivsystemer (innbefattet rettelsesblad AC:2005)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 61 av 120

Page 62: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

45 Jernbaneteknikk

NS-EN 14752:2005

Railway applications - Bodyside entrance systemsJernbane - Dørsystemer for rullende materiell

Språk: enIngen erstatning

47 Skipsbygging og marine konstruksjoner

Standardforslag til høring - europeiske (CEN)

prEN 711

Inland navigation vessels - Railings for decks and side decks - Requirements, typesInnlandsfartøyer - Rekkverk for dekk og sidedekk - Krav, typer

Språk: enKommentarfrist: 2015-07-19

prEN 1914

Inland navigation vessels - Work boats, ship's boats and lifeboatsInnlandsfartøyer - Arbeidsbåter, skipsbåter og livbåter

Språk: enKommentarfrist: 2015-09-14

prEN 16840

Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz and at least 250 AInnlandsfartøyer - Elektrisk shore tilkobling, tre-fase strøm 400 V, 50 Hz og minst 250 A

Språk: enKommentarfrist: 2015-07-19

prEN 16865

Inland navigation vessels - Connections and assembled hoses for the transfer of potable waterInnlandsfartøyer - Tilkoblinger og monterte slanger for overføring av drikkevann

Språk: enKommentarfrist: 2015-09-14

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 484-1

Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 1: Propellers of diameter greater than 2,50 m

Språk: enKommentarfrist: 2015-08-29

ISO/DIS 13073-3

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal processSpråk: enKommentarfrist: 2015-07-31

ISO/DIS 17905.2

Ships and marine technology - Installation, inspection and maintenance of container securing devices for ships

Språk: enKommentarfrist: 2015-07-30

ISO/DIS 18079-1

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 1: General

Språk: enKommentarfrist: 2015-08-27

Listenummer: 11/2015 Side: 62 av 120

Page 63: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

47 Skipsbygging og marine konstruksjoner

ISO/DIS 18079-2

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 2: Inflatable life rafts

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 18079-3

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 3: Inflatable lifejackets

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 18079-4

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 4: Marine evacuation systems

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 18079-5

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 5: Inflated rescue boats

Språk: enKommentarfrist: 2015-08-27

ISO/DIS 22472

Ships and marine technology -- Guidelines for the installation of voyage data recorder (VDR)

Språk: enKommentarfrist: 2015-07-18

ISO/DIS 22472

Ships and marine technology -- Guidelines for the operation and installation of voyage data recorders (VDR)

Språk: enKommentarfrist: 2015-09-15

ISO-standarder

ISO/PAS 18215:2012

Ships and marine technology -- Vessel machinery operations in polar waters -- Guidelines

Språk: en

Tilbaketrukne norske standarder

NS-EN ISO 11674:2001

Ships and marine technology - Heading control systems (ISO 11674:2000)Skip og marinteknologi - Kursstyresystemer (ISO 11674:2000)

Språk: enIngen erstatning

49 Luft- og romfartsteknikk

Standardforslag til høring - europeiske (CEN)

prEN 12312-8

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platformsFlyplassutstyr - Spesifikke krav - Del 8: Trapper og løfteplattformer for vedlikehold

Språk: enKommentarfrist: 2015-09-07

Listenummer: 11/2015 Side: 63 av 120

Page 64: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

49 Luft- og romfartsteknikk

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 22642

Space data and information transfer systems -- TC (telecommand) synchronization and channel coding

Språk: enKommentarfrist: 2015-07-30

ISO-standarder

ISO 8177:2015

Aerospace -- Omega clamps (saddle clamps) for fluid systems -- Dimensions

Språk: enErstatter A00008:20:015266

ISO 10537:2010/Amd 1:2015

Språk: en

ISO 12175:1994/Amd 1:2015

Språk: en

ISO 13526:2010/Amd 1:2015

Språk: en

ISO 18197:2015

Space systems -- Space based services requirements for centimetre class positioning

Språk: en

ISO 22666:2007/Amd 1:2015

Språk: en

Rapporter fra CEN (CR)

CEN/TS 16650:2014

Specification for hose couplings for petrol, oil and lubricants - High pressure couplings

Språk: en

Fastsatte norske standarder

NS-EN 3645-003:2015

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle square flange mounting - Product standardSpråk: en

NS-EN 3645-008:2015

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous - Part 008: Non release plug with grounding ring - Product standardSpråk: en

NS-EN 4674-001:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification

Språk: en

NS-EN 4674-002:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 002: General and list of product standardSpråk: en

Listenummer: 11/2015 Side: 64 av 120

Page 65: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

49 Luft- og romfartsteknikk

NS-EN 4674-003:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range – 65 °C to 200 °C - Product standardSpråk: en

NS-EN 4674-004:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range – 65 °C to 200 °C - Product standardSpråk: en

NS-EN 9110:2015

Quality Management Systems - Requirements for Aviation Maintenance OrganizationsSystemer for kvalitetssikring - Krav til vedlikeholdsorganisasjoner innenfor luftfart

Språk: en

Tilbaketrukne norske standarder

NS-EN 3645-003:2006

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ░C or 200 ░C continuous - Part 003: Receptacle square flange mounting - Product standardSpråk: enIngen erstatning

NS-EN 3645-008:2007

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ░C or 200 ░C continuous - Part 008: Non release plug with grounding ring - Product standardSpråk: enIngen erstatning

NS-EN 9110:2010

Quality Management Systems - Requirements for Aviation Maintenance OrganizationsSystemer for kvalitetssikring - Krav til vedlikeholdsorganisasjoner innenfor luftfart

Språk: enIngen erstatning

53 Utstyr for godshåndtering

Standardforslag til høring - europeiske (CEN)

prEN 14492-1

Cranes - Power driven winches and hoists - Part 1: Power driven winchesKraner - Motordrevne vinsjer og taljer - Del 1: Motordrevne vinsjer

Språk: enKommentarfrist: 2015-09-14

prEN 16851

Cranes - Light crane systems

Språk: enKommentarfrist: 2015-07-19

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 6405-1

Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols

Språk: enKommentarfrist: 2015-07-31

Listenummer: 11/2015 Side: 65 av 120

Page 66: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

55 Emballasje og varedistribusjon

55 Emballasje og varedistribusjon

Standardforslag til høring - europeiske (CEN)

prEN 16860

Railway Applications - Requirements and general principles for securing payload in rail freight transport

Språk: enKommentarfrist: 2015-08-23

Standardforslag til høring - internasjonale (ISO)

ISO 668:2013/DAmd 2

Språk: enKommentarfrist: 2015-09-05

ISO/DIS 13355

Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test

Språk: enKommentarfrist: 2015-09-11

ISO-standarder

ISO 23560:2015

Woven polypropylene sacks for bulk packaging of foodstuffs

Språk: enErstatter A00008:20:041660

Tilbaketrukne norske standarder

NS-EN 14806:2005

Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test

Emballasje - Foreløpig vurdering av oppløsningen av emballasjematerialer under simulerte komposteringsbetingelser ved prøving i laboratorium

Språk: enIngen erstatning

59 Tekstil- og lærteknikk

Standardforslag til høring - europeiske (CEN)

prEN ISO 1421

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO/DIS 1421:2015)Gummi- eller plastbelagte tekstiler - Bestemmelse av strekkfasthet og bruddforlengelse (ISO/DIS 1421:2015)

Språk: enKommentarfrist: 2015-07-02

prEN ISO 4674-1

Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO/DIS 4674-1:2015)Gummi- eller plastbelagte tekstiler - Bestemmelse av rivestyrke - Del 1: Konstant hastighet av rivemetoder (ISO/DIS 4674-1:2015)

Språk: enKommentarfrist: 2015-06-25

Listenummer: 11/2015 Side: 66 av 120

Page 67: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

59 Tekstil- og lærteknikk

prEN ISO 5470-1 rev

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO/DIS 5470-1:2015)Gummi- eller plastbelagte tekstiler - Bestemmelse av slitestyrke - Del 1: Taber abrader (ISO/DIS 5470-1: 2015)

Språk: enKommentarfrist: 2015-06-25

prEN ISO 14362-1

Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres (ISO 24362-1:2015)

Tekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Del 1: Påvisning av bruk av visse azofargestoffer tilgjengelig med eller uten ekstraksjon av fibrene (ISO 24362-1:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 14362-3

Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO/DIS 14362-3:2015)

Tekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Påvisning av bruk av visse azofargestoffer, som kan frigjøre 4-aminoazobenzene (ISO/DIS 14362-3: 2015)

Språk: enKommentarfrist: 2015-07-31

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 1420

Rubber- or plastics-coated fabrics - Determination of resistance to penetration by water [Revision of second edition (ISO 1420:1987)]Språk: enKommentarfrist: 2015-08-01

ISO/DIS 1421

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break

Språk: enKommentarfrist: 2015-07-02

ISO/DIS 4674-1

Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (Revision of ISO 4674:1977)

Gummi- eller plastbelagte materialer - Bestemmelse av rivemotstand - Del 1: Metode med konstant hastighet på riving

Språk: enKommentarfrist: 2015-06-25

ISO/DIS 5470-1

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (Revision of first edition (ISO 5740:1980))Språk: enKommentarfrist: 2015-06-25

ISO/DIS 14362-1

Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres

Tekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Del 1: Påvisning av bruk av visse azofargestoffer tilgjengelig med eller uten ekstraksjon av fibrene

Språk: enKommentarfrist: 2015-07-31

Listenummer: 11/2015 Side: 67 av 120

Page 68: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

59 Tekstil- og lærteknikk

ISO/DIS 14362-3

Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene

ekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Del 3: Påvisning av bruk av visse azofargestoffer, som kan frigi 4-aminoazobenzene

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 18264

Textile slings -- Lifting slings for general purpose lifting operations made from fibre ropes -- High Modulus PolyEthylene (HMPE)Tekstilslings - Løftestropper for generell løfteoperasjon laget av fibertau - High Modulus polyetylen (HMPE)

Språk: enKommentarfrist: 2015-08-09

ISO-standarder

ISO 15701:2015

Leather -- Tests for colour fastness -- Colour fastness to migration into polymeric material

Språk: enErstatter A00008:20:028713

ISO 17234-1:2015

Leather -- Chemical tests for the determination of certain azo colorants in dyed leathers -- Part 1: Determination of certain aromatic amines derived from azo colorantsSpråk: enErstatter A00008:20:050111

ISO 18218-1:2015

Leather -- Determination of ethoxylated alkylphenols -- Part 1: Direct method

Språk: en

ISO 18218-2:2015

Leather -- Determination of ethoxylated alkylphenols -- Part 2: Indirect method

Språk: en

Rapporter fra CEN (CR)

CEN/TS 14416:2014

Geosynthetic barriers - Test method for determining the resistance to rootsGeosyntetiske membraner - Prøvingsmetode for bestemmelse av motstand mot røtter

Språk: en

CEN/TS 14417:2014

Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriersSpråk: en

CEN/TS 14418:2014

Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriersSpråk: en

CEN/TS 16641:2014

Textile floor coverings - Guidelines for acceptable colour deviations

Språk: en

Listenummer: 11/2015 Side: 68 av 120

Page 69: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

59 Tekstil- og lærteknikk

CEN/TS 16717:2015

Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athleteSpråk: en

Fastsatte norske standarder

NS-EN 13249:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av veger og andre trafikkarealer (unntatt jernbaner og asfaltdekker)

Språk: en

NS-EN 13250:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of railwaysGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av jernbaner

Språk: en

NS-EN 13251:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structuresGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved grunnarbeider, fundamenter og støttekonstruksjoner

Språk: en

NS-EN 13252:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in drainage systemsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper i dreneringssystemer

Språk: en

NS-EN 13253:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved erosjonsforebyggende arbeider (kystsikring, elveforbygninger)

Språk: en

NS-EN 13254:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and damsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av reservoarer og dammer

Språk: en

NS-EN 13255:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of canalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av kanaler

Språk: en

NS-EN 13256:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av tunneler og undergrunnskonstruksjoner

Språk: en

NS-EN 13257:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved deponering av fast avfall

Språk: en

Listenummer: 11/2015 Side: 69 av 120

Page 70: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

59 Tekstil- og lærteknikk

NS-EN 13265:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projectsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved inneslutning av flytende avfall

Språk: en

NS-EN 16653:2015

Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test methodGummi- eller plastbelagte stoffer - Bestemmelse av rivestyrke i søm (ved hjelp av nål) - Prøvingsmetode

Språk: en

NS-EN ISO 14931:2015

Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931:2015)Lær - Veiledning for valg av lær for klær (med unntak av pelser) (ISO 14931:2015)

Språk: en

NS-EN ISO 17070:2015

Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015)

Lær - Kjemiske prøvinger - Bestemmelse av tetraklorfenol-, triklorfenol-, diklorfenol-, monoklorofenol-isomer- og pentaklorfenolinnhold (ISO 17070:2015)

Språk: en

NS-EN ISO 17228:2015

Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2015)Lær - Prøvinger av fargeekthet - Endring av farge med akselerert aldring (ISO 17228:2015)

Språk: en

NS-EN ISO 18103:2015

Superfine woven wool fabric labelling - Requirements for Super S code definition (ISO 18103:2015)Merking av superfine vevde ullstoffer - Krav for definisjon av koden Super S (ISO 18103:2015)

Språk: en

NS-EN ISO 23771:2015

Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015)Tekstilmaskiner - Veiledning til utforming av tekstilmaskiner for reduksjon av støy (ISO 23771:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 13249:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av veger og andre trafikkarealer (unntatt jernbaner og asfaltdekker)

Språk: enIngen erstatning

NS-EN 13250:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of railwaysGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av jernbaner

Språk: enIngen erstatning

NS-EN 13251:2014

Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structuresGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved grunnarbeider, fundamenter og støttekonstruksjoner

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 70 av 120

Page 71: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

59 Tekstil- og lærteknikk

NS-EN 13252:2014

Geotextiles and geotextile-related products - Characteristics required for use in drainage systemsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper i dreneringssystemer

Språk: enIngen erstatning

NS-EN 13253:2014

Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved erosjonsforebyggende arbeider (kystsikring, elveforbygninger)

Språk: enIngen erstatning

NS-EN 13254:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and damsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av reservoarer og dammer

Språk: enIngen erstatning

NS-EN 13255:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of canalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av kanaler

Språk: enIngen erstatning

NS-EN 13256:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av tunneler og undergrunnskonstruksjoner

Språk: enIngen erstatning

NS-EN 13257:2014

Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved deponering av fast avfall

Språk: enIngen erstatning

NS-EN 13265:2014

Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projectsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved inneslutning av flytende avfall

Språk: enIngen erstatning

NS-EN ISO 14931:2004

Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931:2004)Lær - Veiledning for valg av lær for klær (med unntak av pelser) (ISO 14931:2004)

Språk: enIngen erstatning

NS-EN ISO 17070:2006

Leather - Chemical tests - Determination of pentachlorophenol content (ISO 17070:2006)Lær - Kjemiske prøvinger - Bestemmelse av pentaklorofenolinnhold (ISO 17070:2006)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 71 av 120

Page 72: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

59 Tekstil- og lærteknikk

NS-EN ISO 17228:2006

Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2005)Lær - Prøvinger av fargeekthet - Endring av farge med akselerert aldring (ISO 17228:2005)

Språk: enIngen erstatning

61 Konfeksjonsindustri

ISO-standarder

ISO 10750:2015

Footwear -- Test method for slide fasteners -- Attachment strength of end stops

Språk: en

ISO/TS 19407:2015

Footwear -- Sizing -- Conversion of sizing systems

Språk: en

ISO/TS 19408:2015

Footwear -- Sizing -- Vocabulary and terminology

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TS 16189:2013

Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013)

Fottøy - Kritiske stoffer potensielt til stede i skotøy og fottøy komponenter - Prøvingsmetode for å kvantitativt bestemme dimethylformamid i skomaterialer (ISO/TS 16189:2013)

Språk: en

CEN ISO/TS 16190:2013

Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials (ISO/TS 16190:2013)

Fottøy - Kritiske stoffer potensielt til stede i skotøy og fottøy komponenter - Prøvings metode for å kvantitativt bestemme polysykliske aromatiske hydrokarboner (PAH) i fottøymaterialer (ISO/DTS 16190:2013)

Språk: en

CEN/TR 16792:2014

Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety

Språk: en

65 Landbruk

Standardforslag til høring - europeiske (CEN)

EN 16318:2013/prA1

Fertilizers and liming materials - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)Språk: enKommentarfrist: 2015-08-02

prEN 13684

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - SafetyHageutstyr - Kultivatorer og luftingsapparater - Sikkerhet

Språk: enKommentarfrist: 2015-08-23

Listenummer: 11/2015 Side: 72 av 120

Page 73: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

65 Landbruk

prEN 15477

Fertilizers - Determination of the water-soluble potassium contentGjødsel - Bestemmelse av innhold av vannløselig kalium

Språk: enKommentarfrist: 2015-07-05

prEN 16847

Fertilizers - Determination of complexing agents in fertilizers - Identification of heptagluconic acid by chromatography

Språk: enKommentarfrist: 2015-06-28

prEN 16877

Animal feeding stuffs - Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS

Dyrefôr - Metoder for prøvetaking og analyse - Bestemmelse av T-2 og HT - 2 giftstoffer, Deoksynivalenol og Zearalenon , i fôrmidler og fôrblandinger med LC -MS

Språk: enKommentarfrist: 2015-09-21

prEN ISO 4254-5

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO/DIS 4254-5:2015)Landbruksmaskiner - Sikkerhet - Del 5: Strømdrevet jordarbeidende maskiner (ISO/DIS 4254-5: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 4254-8

Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO/DIS 4254-8:2015)Landbruksmaskiner - Sikkerhet - Del 8: Solid gjødsel (ISO/DIS 4254-8: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 4254-9

Agricultural machinery - Safety - Part 9: Seed drills (ISO/DIS 4254-9:2015)Landbruksmaskiner - Sikkerhet - Del 9: Såmaskiner (ISO/DIS 4254-9: 2015)

Språk: enKommentarfrist: 2015-07-16

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 3767-3

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipmentSpråk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-1

Radiofrequency identification of animals -- Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)Språk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-1

Radiofrequency identification of animals -- Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)Språk: enKommentarfrist: 2015-10-01

Listenummer: 11/2015 Side: 73 av 120

Page 74: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

65 Landbruk

ISO/DIS 24631-2

Radiofrequency identification of animals -- Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785

Språk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-2

Radiofrequency identification of animals -- Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785

Språk: enKommentarfrist: 2015-10-01

ISO/DIS 24631-3

Radiofrequency identification of animals -- Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-3

Radiofrequency identification of animals -- Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-10-01

ISO/DIS 24631-4

Radio frequency identification of animals -- Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-4

Radiofrequency identification of animals -- Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-10-01

ISO/DIS 25358

Crop protection equipment -- Droplet-size spectra from atomizers -- Measurement and classification

Språk: enKommentarfrist: 2015-08-13

ISO-standarder

ISO 8084:2003/Amd 1:2015

Språk: en

Fastsatte norske standarder

NS-EN 16636:2015

Pest management services - Requirements and competencesTjenester for skadedyrbekjemping - Krav og kompetanse

Språk: en

NS-EN ISO 16122-1:2015

Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2015)Jordbruks- og skogbruksmaskiner - Kontroll av spredere i bruk - Del 1: Generelt (ISO 16122-1:2015)

Språk: en

Listenummer: 11/2015 Side: 74 av 120

Page 75: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

65 Landbruk

NS-EN ISO 16122-2:2015

Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 16122-2:2015)Jordbruks- og skogbruksmaskiner - Kontroll av spredere i bruk - Del 2: Horisontale bomspredere (ISO 16122-2:2015)

Språk: en

NS-EN ISO 16122-3:2015

Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015)Jordbruks- og skogbruksmaskiner - Kontroll av spredere i bruk - Del 3: Spredere for busker og trær (ISO 16122-3:2015)

Språk: en

NS-EN ISO 16122-4:2015

Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (ISO 16122-4:2015)Jord- og skogbruksmaskiner - Kontroll av spredere i bruk - Del 4: Faste og delvis bevegelige spredere (ISO 16122-4:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 13790-1:2003

Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 1: Field crop sprayersLandbruksmaskiner - Sprøyter - Kontroll av sprøyter i bruk - Del 1: Åkersprøyter

Språk: enIngen erstatning

NS-EN 13790-2:2003

Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 2: Air-assisted sprayers for bush and tree cropsLandbruksmaskiner - Sprøyter - Kontroll av sprøyter i bruk - Del 2: Tåkesprøyter for busker og trær

Språk: enIngen erstatning

67 Næringsmiddelteknologi

Standardforslag til høring - europeiske (CEN)

prEN 14176

Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detectionMatvarer - Bestemmelse av domoinsyre i rå skalldyr, rå fisk og kokte skjell med RP-HPLC ved UV bestemmelse

Språk: enKommentarfrist: 2015-07-26

prEN 14526

Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC method using pre-column derivatization with peroxide or periodate oxidation

Matvarer - Bestemmelse av saxitoxin-gruppe toksiner i skalldyr - HPLC metode ved bruk av pre-kolonne derivasjon med peroksid eller periodat oksidasjon

Språk: enKommentarfrist: 2015-07-26

prEN 14944-1

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters

Påvirkning av sementliknende produkter på vann tiltenkt human konsumpsjon - Test metoder - Del 1: Innflytelse av migrasjone fra fabrikkprodusert sementliknende podukter på organoleptiske parametere

Språk: enKommentarfrist: 2015-08-02

Listenummer: 11/2015 Side: 75 av 120

Page 76: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

67 Næringsmiddelteknologi

prEN 14944-1 rev

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parametersSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3

Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious productsSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3 rev

Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious productsSpråk: enKommentarfrist: 2015-08-02

prEN 16852

Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks - GC-MS method

Språk: enKommentarfrist: 2015-08-02

prEN 16857

Foodstuffs - Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS)Språk: enKommentarfrist: 2015-08-23

prEN 16858

Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs by liquid chromatography and tandem mass spectrometry (LC-MS/MS)Språk: enKommentarfrist: 2015-08-31

prEN 16876

Food processing machinery - Soft ice cream machines - Safety and hygiene requirements

Språk: enKommentarfrist: 2015-09-27

prEN 16881

Food processing machinery - Pasteurizers, vats and cream cookers - Safety and hygiene requirements

Språk: enKommentarfrist: 2015-09-27

prEN 16889

Food hygiene - Production and dispense of hot beverages from hot beverage appliances - Hygiene requirements, migration test

Språk: enKommentarfrist: 2015-07-16

ISO-standarder

ISO 6647-1:2015

Rice -- Determination of amylose content -- Part 1: Reference method

Språk: enErstatter A00008:20:037572

Listenummer: 11/2015 Side: 76 av 120

Page 77: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

67 Næringsmiddelteknologi

ISO 6647-2:2015

Rice -- Determination of amylose content -- Part 2: Routine methods

Språk: enErstatter A00008:20:037897

ISO 8455:2011/Amd 1:2015

Språk: en

ISO 11056:1999/Amd 2:2015

Språk: en

ISO 12966-4:2015

Animal and vegetable fats and oils -- Gas chromatography of fatty acid methyl esters -- Part 4: Determination by capillary gas chromatographySpråk: enErstatter A00008:20:011558,A00008:20:035454

ISO/TR 17623:2015

Molecular biomarker analysis -- SSR analysis of maize

Språk: en

Rapporter fra CEN (CR)

CEN/TR 16699:2014

Foodstuffs - Determination of pesticide residues by GC-MS/MS - Tandem mass spectrometric parameters

Språk: en

CEN/TS 16621:2014

Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD)Språk: en

CEN/TS 16707:2014

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies

Matvarer - Metoder for å påvise genetisk modifiserte organismer og avledete produkter - Polymerase kjedereaksjon (PCR) baserte kartleggingsstrategier

Språk: en

CEN/TS 16731:2014

Foodstuffs - Determination of hydride-reactive arsenic compounds in rice by atomic absorption spectrometry (Hydride-AAS) following acid extraction

Matvarer – Bestemmelse av hydridreaktive arsenikkforbindelser i ris ved atomabsorpsjonsspektrometri (Hydrid-AAS) etterfølgende syreekstraksjon

Språk: en

Fastsatte norske standarder

NS-EN ISO 5527:2015

Cereals - Vocabulary (ISO 5527:2015)Korn - Terminologi (ISO 5527:2015)

Språk: en

Listenummer: 11/2015 Side: 77 av 120

Page 78: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

67 Næringsmiddelteknologi

Tilbaketrukne norske standarder

NS-EN ISO 15304:2002

Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002) - (Corrigendum AC:2004 incorporated)

Animalske og vegetabilske fett og oljer - Bestemmelse av innholdet av transfettsyreisomerer i vegetabilske fett og oljer - Gasskromatografisk metode (ISO 15304:2002) - (innbefattet rettelsesblad AC:2004)

Språk: enIngen erstatning

NS-EN ISO 15304:2002/AC:2004

Corrigendum AC - Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002/Cor.1:2003)

Rettelsesblad AC - Animalske og vegetabilske fett og oljer - Bestemmelse av innholdet av transfettsyreisomerer i vegetabilske fett og oljer - Gasskromatografisk metode (ISO 15304:2002/Cor.1:2003)

Språk: enIngen erstatning

71 Kjemiteknikk

Standardforslag til høring - europeiske (CEN)

prEN 16785-2

Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method

Språk: enKommentarfrist: 2015-07-26

prEN 16877

Animal feeding stuffs - Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS

Dyrefôr - Metoder for prøvetaking og analyse - Bestemmelse av T-2 og HT - 2 giftstoffer, Deoksynivalenol og Zearalenon , i fôrmidler og fôrblandinger med LC -MS

Språk: enKommentarfrist: 2015-09-21

ISO-standarder

ISO 7504:2015

Gas analysis -- Vocabulary

Språk: enErstatter A00008:20:024662

ISO 14707:2015

Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use

Språk: enErstatter A00008:20:024338

ISO 16560:2015

Surface active agents -- Determination of polyethylene glycol content in nonionic ethoxylated surfactants -- HPLC method

Språk: en

ISO 17280:2015

Surface active agents -- Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

Språk: en

ISO 17786:2015

Dimethyl ether (DME) for fuels -- Determination of high temperature (105°C) evaporation residues -- Mass analysis method

Språk: en

Listenummer: 11/2015 Side: 78 av 120

Page 79: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

71 Kjemiteknikk

ISO 18118:2015

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materialsSpråk: enErstatter A00008:20:029146

ISO 18321:2015

Essential oils -- Determination of peroxide value

Språk: en

ISO 18337:2015

Surface chemical analysis -- Surface characterization -- Measurement of the lateral resolution of a confocal fluorescence microscopeSpråk: en

ISO/TR 79:2015

Reference materials - Examples of reference materials for qualitative properties

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TR 24475:2013

Cosmetics - Good Manufacturing Practices - General training document (ISO/TR 24475:2010)

Språk: en

CEN/TR 10317:2014

European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)Språk: en

CEN/TR 16589:2013

Laboratory installations - Capture devices with articulated extract armLaboratorieinstallasjoner - Gripeenheter med leddet ekstrakt arm

Språk: en

CEN/TR 16663:2014

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field methodSpråk: en

CEN/TS 12404:2015

Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory methodSpråk: en

CEN/TS 16640:2014

Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method

Språk: en

Fastsatte norske standarder

NS-EN 1018:2013+A1:2015

Chemicals used for treatment of water intended for human consumption - Calcium carbonateKjemikaliar brukte til handsaming av drikkevatn - Kalsiumkarbonat

Språk: en

Listenummer: 11/2015 Side: 79 av 120

Page 80: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

71 Kjemiteknikk

NS-EN 12876:2015

Chemicals used for treatment of water intended for human consumption - OxygenKjemikalier brukt til behandling av drikkevann - Oksygen

Språk: en

NS-EN 12926:2015

Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfateKjemikalier brukt til behandling av drikkevann - Natriumperoksodisulfat

Språk: en

NS-EN 12931:2015

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous

Kjemikalier brukt til behandling av drikkevann - Kjemikalier til nødbruk - Vannfritt natriumdiklorisocyanurat

Språk: en

NS-EN 12932:2015

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate

Kjemikalier brukt til behandling av drikkevann - Kjemikalier til nødbruk - Natriumdiklorisocyanurat-dihydrat

Språk: en

NS-EN 12933:2015

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acidKjemikalier brukt til behandling av drikkevann - Kjemikalier til nødbruk - Triklorisocyanursyre

Språk: en

NS-EN 13176:2015

Chemicals used for treatment of water intended for human consumption - EthanolKjemikalier brukt til behandling av drikkevann - Etanol

Språk: en

NS-EN 13194:2015

Chemicals used for treatment of water intended for human consumption - Acetic AcidKjemikalier brukt til behandling av drikkevann - Eddiksyre

Språk: en

NS-EN 15030:2012+A1:2015

Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent useKjemikalier brukt til behandling av drikkevann - Sølvsalter til intermitterende bruk

Språk: en

NS-EN ISO 6141:2015

Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)Gassanalyse - Innhold i sertifikater for kalibreringsgassblandinger (ISO 6141:2015)

Språk: en

NS-EN ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 1: Generelle krav (ISO 10439-1:2015)

Språk: en

NS-EN ISO 10439-2:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 2: Ikke-integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-2:2015)

Språk: en

Listenummer: 11/2015 Side: 80 av 120

Page 81: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

71 Kjemiteknikk

NS-EN ISO 10439-3:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO 10439-3:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 3: Integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-3:2015)

Språk: en

NS-EN ISO 10439-4:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO 10439-4:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 4: Ekspansjonskompressorer (ISO 10439-4:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 1018:2013

Chemicals used for treatment of water intended for human consumption - Calcium carbonateKjemikaliar brukte til handsaming av drikkevatn - Kalsiumkarbonat

Språk: enIngen erstatning

NS-EN 12876:2009

Chemicals used for treatment of water intended for human consumption - OxygenKjemikalier brukt til behandling av drikkevann - Oksygen

Språk: enIngen erstatning

NS-EN 12926:2008

Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfateKjemikalier brukt til behandling av drikkevann - Natriumperoksodisulfat

Språk: enIngen erstatning

NS-EN 12931:2008

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous

Kjemikalier brukt til behandling av drikkevann - Kjemikalier til nødbruk - Vannfritt natriumdiklorisocyanurat

Språk: enIngen erstatning

NS-EN 12932:2008

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate

Kjemikalier brukt til behandling av drikkevann - Kjemikalier til nødbruk - Natriumdiklorisocyanurat-dihydrat

Språk: enIngen erstatning

NS-EN 12933:2008

Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acidKjemikalier brukt til behandling av drikkevann - Kjemikalier til nødbruk - Triklorisocyanursyre

Språk: enIngen erstatning

NS-EN 13176:2008

Chemicals used for treatment of water intended for human consumption - EthanolKjemikalier brukt til behandling av drikkevann - Etanol

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 81 av 120

Page 82: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

71 Kjemiteknikk

NS-EN 13194:2008

Chemicals used for treatment of water intended for human consumption - Acetic acidKjemikalier brukt til behandling av drikkevann - Eddiksyre

Språk: enIngen erstatning

NS-EN 15030:2012

Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent useKjemikalier brukt til behandling av drikkevann - Sølvsalter til intermitterende bruk

Språk: enIngen erstatning

NS-EN ISO 6141:2006

Gas analysis - Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000)Gassanalyse - Krav til sertifikater for kalibreringsgasser og gassblandinger (ISO 6141:2000)

Språk: enIngen erstatning

73 Gruvedrift og mineraler

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 13543

Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot

Språk: enKommentarfrist: 2015-08-01

ISO-standarder

ISO 502:2015

Coal -- Determination of caking power -- Gray-King coke test

Språk: enErstatter A00008:20:004557

ISO 602:2015

Coal -- Determination of mineral matter

Språk: enErstatter A00008:20:004705

ISO 10203:2015

Iron ores -- Determination of calcium -- Flame atomic absorption spectrometric method

Språk: enErstatter A00008:20:039729

ISO 10258:2015

Copper sulfide concentrates -- Determination of copper content -- Titrimetric methods

Språk: enErstatter A00008:20:018298

ISO 12900:2015

Hard coal -- Determination of abrasiveness

Språk: enErstatter A00008:20:001671

Listenummer: 11/2015 Side: 82 av 120

Page 83: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

73 Gruvedrift og mineraler

ISO 15247:2015

Zinc sulfide concentrates -- Determination of silver content -- Acid dissolution and flame atomic absorption spectrometric method

Språk: enErstatter A00008:20:027056

ISO 15633:2015

Iron ores -- Determination of nickel -- Flame atomic absorption spectrometric method

Språk: enErstatter A00008:20:043729

75 Petroleumsteknologi og beslektet teknologi

Standardforslag til høring - europeiske (CEN)

prEN 12081

Railway applications - Axleboxes - Lubricating greasesJernbane - Akselkasser - Smørefett

Språk: enKommentarfrist: 2015-08-09

prEN 13075-1

Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 1: Bestemmelse av brytningsverdi for kationiske bitumenemulsjoner med mineralfillermetoden

Språk: enKommentarfrist: 2015-07-19

prEN 13075-2

Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 2: Bestemmelse av blandetid med mineralfiller for kationiske bitumenemulsjoner

Språk: enKommentarfrist: 2015-07-19

prEN 16849

Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance

Språk: enKommentarfrist: 2015-07-19

prEN ISO 18846

Solid biofuels - Determination of fines content in quantities of pellets (ISO/DIS 18846:2015)Fast biobrensel - Bestemmelse av finfraksjon innhold i mengde pellets (ISO/DIS 18846:2015)

Språk: enKommentarfrist: 2015-07-09

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 2719

Determination of flash point - Pensky-Martens closed cup method [Revision of second edition (ISO 2719:1988)]

Språk: enKommentarfrist: 2015-09-11

ISO/DIS 6976

Natural gas -- Calculation of calorific values, density, relative density and Wobbe indices from composition

Språk: enKommentarfrist: 2015-08-09

Listenummer: 11/2015 Side: 83 av 120

Page 84: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

75 Petroleumsteknologi og beslektet teknologi

ISO/DIS 11759

Rubber hoses and hose assemblies for dispensing liquefied petroleum gas (LPG) - SpecificationGummislanger og slangeforbindelser for tanking av flytende petroleumsgass (LPG) - Spesifikasjoner

Språk: enKommentarfrist: 2015-08-13

ISO/DIS 12156-1.2

Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 1: Test method

Språk: enKommentarfrist: 2015-08-11

ISO/DIS 15380

Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPRSpråk: enKommentarfrist: 2015-06-26

ISO/DIS 15380

Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPRSpråk: enKommentarfrist: 2015-08-24

ISO/DIS 16486-4

Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 4: ValvesSpråk: enKommentarfrist: 2015-08-18

ISO/DIS 16530-1

Petroleum and natural gas industries -- Well integrity -- Part 1: Life cycle governance

Språk: enKommentarfrist: 2015-08-09

ISO/DIS 18846

Solid biofuels -- Determination of fines content in quantities of pelletsSolid biobrensel -- Bestemmelse av finfraksjon innhold i mengde pellets

Språk: enKommentarfrist: 2015-09-06

ISO/FDIS 5772

Rubber hoses and hose assemblies for measured fuel dispensing - SpecificationGummislanger og slangekoblinger for målt brennstofftanking - Krav

Språk: enKommentarfrist: 2015-08-02

ISO-standarder

ISO 17786:2015

Dimethyl ether (DME) for fuels -- Determination of high temperature (105°C) evaporation residues -- Mass analysis method

Språk: en

ISO/TR 17177:2015

Petroleum and natural gas industries -- Guidelines for the marine interfaces of hybrid LNG terminals

Språk: en

Listenummer: 11/2015 Side: 84 av 120

Page 85: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

75 Petroleumsteknologi og beslektet teknologi

ISO/TS 15926-11:2015

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 11: Methodology for simplified industrial usage of reference dataSpråk: en

Rapporter fra CEN (CR)

CEN ISO/TR 13624-2:2013

Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR 13624-2:2009)Språk: en

CEN ISO/TR 19905-2:2013

Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 2: Jack-ups commentary and detailed sample calculation (ISO/TR 19905-2:2012)Språk: en

CEN ISO/TS 12747:2013

Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension (ISO/TS 12747:2011)Språk: en

CEN/TR 15149-3:2014

Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method

Språk: en

CEN/TR 15367-1:2014

Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuelsPetroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel

Språk: en

CEN/TR 15745:2015

Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report

Flytende petroleumsprodukter – Bestemmelse av hydrokarbontyper og oksygenater via multidimensjonal gasskromatografimetode – Ringtest forskningsrapport

Språk: en

CEN/TR 16514:2013

Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol

Drivstoff – Blyfri bensin som inneholder mer enn 3,7 % (m/m) oksygen – Roadmap, prøvingsmetoder og krav for E10+ bensin

Språk: en

CEN/TR 16557:2013

Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determinationSpråk: en

CEN/TR 16569:2013

Automotive fuels - Assessing the effects of E10 petrol on vehicle emissions and performanceDrivstoff - Fastsettelse av effekt av E10 bensin på kjøretøyets utslipp og yteevne

Språk: en

CEN/TR 16680:2014

Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors

Flytende petroliumsprodukter - Undersøkelse av indre dieselinnsprøytning mekanismer for fastsittende avleiringer og påvirkningene på korrosjonshemmere

Språk: en

Listenummer: 11/2015 Side: 85 av 120

Page 86: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

75 Petroleumsteknologi og beslektet teknologi

CEN/TS 16214-2:2014

Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance

Bærekraftig fremstilt biomasse til energianvendelser – Prinsipper, kriterier, indikatorer og påvisere for for biodrivstoff og biovæsker (bioliquids) – Del 2: Samsvarsvurdering inkludert overvåkingsskjede og massebalanse

Språk: en

Fastsatte norske standarder

NS-EN 16136:2015

Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method

Drivstoff - Bestemmelse av innhold av mangan og jern i blyfri bensin - Optisk emisjonsspektrometri med induktivt koblet plasma (ICP OES)

Språk: en

NS-EN ISO 3679:2015

Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)Bestemmelse av flamme/ingen flamme og flammepunkt - Rask likevektsmetode med lukket digel (ISO 3679:2015)

Språk: en

NS-EN ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 1: Generelle krav (ISO 10439-1:2015)

Språk: en

NS-EN ISO 10439-2:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 2: Ikke-integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-2:2015)

Språk: en

NS-EN ISO 10439-3:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO 10439-3:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 3: Integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-3:2015)

Språk: en

NS-EN ISO 10439-4:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO 10439-4:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 4: Ekspansjonskompressorer (ISO 10439-4:2015)

Språk: en

NS-EN ISO 16995:2015

Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)Fast biobrensel - Bestemmelse av vannløselig klor-, natrium- og kaliuminnhold (ISO 16995:2015)

Språk: en

Listenummer: 11/2015 Side: 86 av 120

Page 87: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

75 Petroleumsteknologi og beslektet teknologi

Tilbaketrukne norske standarder

NS-EN 15105:2011

Solid biofuels - Determination of the water soluble chloride, sodium and potassium contentFast biobrensel - Bestemmelse av vannløselig klor-, natrium- og kaliuminnhold

Språk: enIngen erstatning

NS-EN 16136:2011

Automotive fuels - Determination of manganese content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method

Drivstoff - Bestemmelse av manganinnhold i blyfri bensin - Optisk emisjonsspektrometri med induktivt koblet plasma (ICP-OES)

Språk: enIngen erstatning

NS-EN ISO 3679:2004

Determination of flash point - Rapid equilibrium closed cup method (ISO 3679:2004)Bestemmelse av flammepunkt - Hurtiglikevektsmetode med lukket digel (ISO 3679:2004)

Språk: enIngen erstatning

NS-EN ISO 3680:2004

Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)Bestemmelse av flamme/ingen flamme - Hurtiglikevektsmetode med lukket digel (ISO 3680:2004)

Språk: enIngen erstatning

NS-EN ISO 10439:2002

Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)Petroleumindustri, kjemisk industri og gassindustri - Sentrifugalkompressorer (ISO 10439:2000)

Språk: enIngen erstatning

77 Metallurgi

Standardforslag til høring - europeiske (CEN)

prEN 1503-4

Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European StandardsVentiler - Materialer for hus og deksler - Del 4: Kobberlegeringer spesifisert i europeiske standarder

Språk: enKommentarfrist: 2015-09-07

prEN 1563

Founding - Spheroidal graphite cast ironsStøperiteknikk - Kulegrafittjern

Språk: enKommentarfrist: 2015-09-21

prEN 10056-1 rev

Structural steel equal and unequal leg angles - Part 1: DimensionsStrukturelle stål like og ulike beinvinkler - Del 1: Mål

Språk: enKommentarfrist: 2015-07-26

Listenummer: 11/2015 Side: 87 av 120

Page 88: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

77 Metallurgi

prEN 16828

Hot rolled steel channels, I and H sections - Dimensions and massesVarmvalsede stålkanaler, I og H-profiler - Dimensjoner og masser

Språk: enKommentarfrist: 2015-07-19

prEN ISO 4545-1

Metallic materials - Knoop hardness test - Part 1: Test method (ISO/DIS 4545-1:2015)Metalliske materialer - Knoop hardhetsprøving - Del 1: Prøvingsmetode (ISO/DIS 4545-1: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 4545-2

Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 4545-2:2015)Metalliske materialer - Knoop hardhetsprøving - Del 2: Verifikasjon og kalibrering av prøvingsmaskiner (ISO/DIS 4545-2: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 4545-3

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO/DIS 4545-3:2015)Metalliske materialer - Knoop hardhetsprøving - Del 3: Kalibrering av referanseblokker (ISO/DIS 4545-3: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 4545-4

Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO/DIS 4545-4:2015)Metalliske materialer - Knoop hardhetsprøving - Del 4: Tabell over hardhetverdier (ISO/DIS 4545-4: 2015)

Språk: enKommentarfrist: 2015-07-16

prEN ISO 8049

Ferronickel shot - Sampling for analysis (ISO/DIS 8049:2015)Ferronikkel-kuler - Uttak av prøver for analyse (ISO/DIS 8049:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 14577-4

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO/DIS 14577-4:2015)

Metalliske materialer - Instrumentert inntrykningsprøving for hardhet og materialparametre - Del 4: Prøvingsmetode for metalliske og ikke-metalliske belegg (ISO/DIS 14577-4:2015)

Språk: enKommentarfrist: 2015-07-16

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 4545-1

Metallic materials -- Knoop hardness test -- Part 1: Test method

Språk: enKommentarfrist: 2015-07-16

ISO/DIS 4545-2

Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines

Språk: enKommentarfrist: 2015-07-16

Listenummer: 11/2015 Side: 88 av 120

Page 89: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

77 Metallurgi

ISO/DIS 4545-3

Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks

Språk: enKommentarfrist: 2015-07-16

ISO/DIS 4545-4

Metallic materials -- Knoop hardness test -- Part 4: Tables of hardness values

Språk: enKommentarfrist: 2015-07-16

ISO/DIS 14577-4

Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatingsSpråk: enKommentarfrist: 2015-07-16

ISO-standarder

ISO 6892-3:2015

Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature

Språk: enErstatter A00008:20:028229

ISO 7530-1:2015

Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 1: Determination of cobalt, chromium, copper, iron and manganeseSpråk: enErstatter A00008:20:014299,A00008:20:014300,A00008:20:014301,A00008:20:014302,A00008:20:014303,A00008:20:014304

ISO 16701:2015

Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solutionSpråk: enErstatter A00008:20:029388

ISO 17093:2015

Corrosion of metals and alloys -- Guidelines for corrosion test by electrochemical noise measurements

Språk: en

ISO 17224:2015

Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substancesSpråk: en

ISO 17245:2015

Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditionsSpråk: en

ISO 17248:2015

Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solidsSpråk: en

ISO 18069:2015

Corrosion of metals and alloys -- Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquidsSpråk: en

Listenummer: 11/2015 Side: 89 av 120

Page 90: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

77 Metallurgi

ISO 18086:2015

Corrosion of metals and alloys -- Determination of AC corrosion -- Protection criteria

Språk: en

Rapporter fra CEN (CR)

CEN/TR 10317:2014

European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)Språk: en

CEN/TR 10362:2014

Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric methodSpråk: en

CEN/TR 16748:2014

Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting

Språk: en

CEN/TR 16749:2014

Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast ProductsSpråk: en

CEN/TS 13388:2015

Copper and copper alloys - Compendium of compositions and products

Språk: en

CEN/TS 13714:2013

Characterization of sludges - Sludge management in relation to use or disposalKarakterisering av slam - Disponering av slam

Språk: en

CEN/TS 15656:2015

Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method

Språk: en

Fastsatte norske standarder

NS-EN 1559-4:2015

Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castingsStøperiteknikk - Tekniske leveringsbetingelser - Del 4: Tilleggskrav for støpelegeringer av aluminium

Språk: en

NS-EN ISO 6508-1:2015

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2015)Metalliske materialer - Rockwell-hardhetsprøving - Del 1: Prøvingsmetode (ISO 6508-1:2015)

Språk: en

NS-EN ISO 6508-2:2015

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)

Metalliske materialer - Rockwell-hardhetsprøving - Del 2: Verifikasjon og kalibrering av prøvingsmaskiner og inntrykkingsinnretninger (ISO 6508-2:2015)

Språk: en

Listenummer: 11/2015 Side: 90 av 120

Page 91: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

77 Metallurgi

NS-EN ISO 6508-3:2015

Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)Metalliske materialer - Rockwell-hardhetsprøving - Del 3: Kalibrering av referanseblokker (ISO 6508-3:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 1559-4:1999

Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castingsStøperiteknikk - Tekniske leveringsbetingelser - Del 4: Tilleggskrav for støpelegeringer av aluminium

Språk: enIngen erstatning

NS-EN ISO 6508-1:2005

Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005)Metalliske materialer - Rockwellhardhetsmåling - Del 1: Prøvingsmetode (skala A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005)

Språk: enIngen erstatning

NS-EN ISO 6508-2:2005

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005)

Metalliske materialer - Rockwellhardhetsmåling - Del 2: Verifikasjon og kalibrering av prøvingsmaskiner (skala A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005)

Språk: enIngen erstatning

NS-EN ISO 6508-3:2005

Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005)

Metalliske materialer - Rockwellhardhetsmåling - Del 3: Kalibrering av referanseblokker (skala A, B, D, E, F, G, H, K, N, T) (ISO 6508-3:2005)

Språk: enIngen erstatning

79 Treteknikk

Standardforslag til høring - europeiske (CEN)

prEN 16873

Conservation of cultural heritage - Guidelines for management of waterlogged wood on terrestrial sites of archaeological significance

Bevaring av kulturminner - Veiledning for forvaltning av vannmettet tre i områder på land av arkeologisk betydning

Språk: enKommentarfrist: 2015-09-14

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 16893.2

Wood-based panels -- ParticleboardTrebaserte plater - Sponplate

Språk: enKommentarfrist: 2015-09-11

Listenummer: 11/2015 Side: 91 av 120

Page 92: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

79 Treteknikk

ISO/DIS 16895.2

Wood-based panels -- Dry-process fibreboardTrebaserte plater - Tørr-prosessert fiberplate

Språk: enKommentarfrist: 2015-09-07

ISO/DIS 17064

Wood-based panels -- Fibreboard and particleboard -- VocabularyTrebaserte plater - Fiberplate og sponplate - Vokabular

Språk: enKommentarfrist: 2015-08-18

ISO/DIS 17064

Wood-based panels -- Fibreboard, particleboard and oriented strand board (OSB) -- Vocabulary

Språk: enKommentarfrist: 2015-10-15

ISO-standarder

ISO 1215:2015

Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste -- Definitions and packagingSpråk: enErstatter A00008:20:005823

Rapporter fra CEN (CR)

CEN/TR 12872:2014

Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofsTrebaserte plater - Veiledning for bruk av bærende plater i gulv, vegger og tak

Språk: en

CEN/TR 16816:2015

End use performance of wood products - Utilisation and improvement of existing methods to estimate service life

Språk: en

CEN/TS 16368:2014

Lightweight Particleboards - SpecificationsLette sponplater - Krav

Språk: en

CEN/TS 16526:2013

Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristicsSpråk: en

Fastsatte norske standarder

NS-EN 636:2012+A1:2015

Plywood - SpecificationsKryssfiner - Krav

Språk: en

Listenummer: 11/2015 Side: 92 av 120

Page 93: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

79 Treteknikk

Tilbaketrukne norske standarder

NS-EN 636:2012

Plywood - SpecificationsKryssfiner - Krav

Språk: enIngen erstatning

81 Glassindustri og keramisk industri

ISO-standarder

ISO 3537:2015

Road vehicles -- Safety glazing materials -- Mechanical tests

Språk: enErstatter A00008:20:029023

ISO 18558:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for determining elastic modulus and bending strength of ceramic tube and ringsSpråk: en

ISO 22016:2015

Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods

Språk: en

83 Gummi- og plastindustri

Standardforslag til høring - europeiske (CEN)

prEN 302-8

Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear

Lim for lastbærende trekonstruksjoner - Prøvngsmetoder- Del 8 : Statisk trykk-/skjærbelastning av prøvestykke med flere limfuger

Språk: enKommentarfrist: 2015-08-23

prEN 12012-1

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shreddersMaskiner for plast- og gummibearbeiding - Størrelsesreduserende maskiner - Del 1: Sikkerhetskrav for skovlgranulatorer og kverner

Språk: enKommentarfrist: 2015-08-16

prEN 15416-1

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glasshouse test)

Lim for bærende trekonstruksjoner andre nenn fenol og aminoplast - Prøvingsmetoder - Del 1: Statisk belastningsprøving vinkelrett på limfugen under vekslende klimatiske forhold (Drivhus-prøve)

Språk: enKommentarfrist: 2015-08-23

Listenummer: 11/2015 Side: 93 av 120

Page 94: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

83 Gummi- og plastindustri

prEN 15416-3

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear

Lim for bærende trekonstruksjoner som ikke er fenol eller aminoplast - Prøvingsmetoder - Del 3: sigeprøving ved bøyeskjærbelastning under vekslende klimatiske forhold

Språk: enKommentarfrist: 2015-08-23

prEN 15416-4

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions

Lim for bærende trekonstruksjoner som ikke er fenol eller aminoplast - Prøvingsmetoder - Del 4: Bestemmelse av åpentid under gitte forhold

Språk: enKommentarfrist: 2015-08-23

prEN 15416-5

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions

Lim for bærende trekonstruksjoner som ikke er fenol eller aminoplast - Prøvingsmetoder - Del 5: Bestemmelse av presstid under gitte forhold

Språk: enKommentarfrist: 2015-08-23

prEN 15425

Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirementsLim - En-komponent polyuretan (PUR) for bærende trekonstruksjoner - Klassifisering og krav til utførelse

Språk: enKommentarfrist: 2015-08-23

prEN ISO 20568-1

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/DIS 20568-1:2015)Språk: enKommentarfrist: 2015-08-14

prEN ISO 20568-2

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 20568-2:2015)Språk: enKommentarfrist: 2015-08-21

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 289-2

Acoustics -- Reference zero for the calibration of audiometric equipment Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (Formerly ISO 389/DAM 1)Språk: enKommentarfrist: 2015-08-13

ISO/DIS 294-5

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for determining the anisotropy of the properties of injection-moulded plasticsSpråk: enKommentarfrist: 2015-09-11

Listenummer: 11/2015 Side: 94 av 120

Page 95: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

83 Gummi- og plastindustri

ISO/DIS 8502-9

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

Forbehandling av stål før påføring av maling og beslektede produkter - Prøvinger for å vurdere overflaterenhet - Del 9: Feltmetode for bestemmelse av vannløslige salter ved konduktivitetsmåling

Språk: enKommentarfrist: 2015-07-12

ISO/DIS 11424

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification

Språk: enKommentarfrist: 2015-08-13

ISO/DIS 11759

Rubber hoses and hose assemblies for dispensing liquefied petroleum gas (LPG) - SpecificationGummislanger og slangeforbindelser for tanking av flytende petroleumsgass (LPG) - Spesifikasjoner

Språk: enKommentarfrist: 2015-08-13

ISO/DIS 14853

Plastics - Determination of the ultimate anaerobic biodegradability in an aqueous system - Method by measurement of biogas productionSpråk: enKommentarfrist: 2015-09-09

ISO/DIS 16486-4

Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 4: ValvesSpråk: enKommentarfrist: 2015-08-18

ISO/FDIS 5772

Rubber hoses and hose assemblies for measured fuel dispensing - SpecificationGummislanger og slangekoblinger for målt brennstofftanking - Krav

Språk: enKommentarfrist: 2015-08-02

ISO-standarder

ISO 34-1:2015

Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces

Språk: enErstatter A00008:20:050751

ISO 34-2:2015

Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces

Språk: enErstatter A00008:20:057719

ISO 2028:2015

Synthetic rubber latex -- Preparation of dry polymer

Språk: enErstatter A00008:20:027914

ISO 3601-5:2015

Fluid power systems -- O-rings -- Part 5: Specification of elastomeric materials for industrial applications

Språk: enErstatter A00008:20:031580

Listenummer: 11/2015 Side: 95 av 120

Page 96: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

83 Gummi- og plastindustri

ISO 4633:2015

Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials

Språk: enErstatter A00008:20:032972

ISO 6505:2015

Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals

Språk: enErstatter A00008:20:036982

ISO 13802:2015

Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing

Språk: enErstatter A00008:20:022948,A00008:20:033796

ISO 13927:2015

Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector

Språk: enErstatter A00008:20:023339

ISO 15106-5:2015

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 5: Pressure sensor method

Språk: en

ISO 15106-6:2015

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 6: Atmospheric pressure ionization mass spectrometer methodSpråk: en

ISO 15106-7:2015

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 7: Calcium corrosion method

Språk: en

ISO 15825:2015

Rubber compounding ingredients -- Carbon black -- Determination of aggregate size distribution by disc centrifuge photosedimentometrySpråk: enErstatter A00008:20:038941,A00008:20:043762

ISO 18517:2015

Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide

Språk: enErstatter A00008:20:040321

ISO 18852:2015

Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)Språk: enErstatter A00008:20:060832

ISO 19051:2015

Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content by Micro Dumas combustion method

Språk: en

ISO 19242:2015

Rubber -- Determination of total sulfur content by ion chromatography

Språk: en

Listenummer: 11/2015 Side: 96 av 120

Page 97: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

83 Gummi- og plastindustri

ISO 23560:2015

Woven polypropylene sacks for bulk packaging of foodstuffs

Språk: enErstatter A00008:20:041660

Rapporter fra CEN (CR)

CEN ISO/TR 22007-5:2014

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)Språk: en

CEN/TS 14578:2013

Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation

Rørledningssystemer av plast for vannforsyning og avløp - Glassfiberarmert herdeplast (GRP) basert på umettet polyesterharpiks (UP) - Installasjonsveiledning

Språk: en

CEN/TS 14999:2013

Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container

Språk: en

CEN/TS 16640:2014

Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method

Språk: en

CEN/TS 16861:2015

Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)

Språk: en

Fastsatte norske standarder

NS-EN ISO 899-1:2003/A1:2015

Amendment A1 - Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003/Amd 1:2015)Endringsblad A1 - Plast - Bestemmelse av krypforhold - Del 1: Strekk-kryping (ISO 899-1:2003/Amd 1:2015)

Språk: en

NS-EN ISO 899-2:2003/A1:2015

Amendment A1 - Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003/Amd 1:2015)

Endringsblad A1 - Plast - Bestemmelse av krypforhold - Del 2: Bøyekryping ved trepunktsbelastning (ISO 899-2:2003/Amd 1:2015)

Språk: en

NS-EN ISO 9988-2:2015

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)

Plast - Materialer av polyoksymetylen (POM) for støping og ekstrudering - Del 2: Tilberedning av prøvelegemer og bestemmelse av egenskaper (ISO 9988-2:2006)

Språk: en

NS-EN ISO 13845:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for trykkrør av termoplast - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2015)

Språk: en

Listenummer: 11/2015 Side: 97 av 120

Page 98: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

83 Gummi- og plastindustri

NS-EN ISO 16396-1:2015

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)

Plast - Støpe- og ekstruderingsmaterialer av polyamid (PA) - Del 1: Betegnelsessystem, merking av produkter og grunnlag for spesifikasjoner (ISO 16396-1:2015)

Språk: en

NS-EN ISO 19069-1:2015

Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015)

Plast - Polypropylen (PP), støpe- og ekstruderingsmasse - Del 1: Betegnelsessystem og grunnlag for spesifikasjoner (ISO 19069-1:2015)

Språk: en

NS-EN ISO 22007-6:2015

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)

Plast - Bestemmelse av termisk konduktivitet og termisk diffusivitet - Del 6: Komparativ metode for lav termisk konduktivitet ved bruk av en temperaturmoduleringsteknikk (ISO 22007-6:2014)

Språk: en

NS-EN ISO 28017:2011/A1:2015

Amendment A1 - Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011/Amd 1:2015)

Endringsblad A1 - Gummislanger og slangekoplinger forsterket med korder eller tekstiler til mudringsformål - Spesifikasjon (ISO 28017:2011/Amd 1:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN ISO 1873-1:1995

Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1873-1:1995)

Plast - Polypropylen (PP), støpe- og ekstruderingsmasse - Del 1: Betegnelsessystem og grunnlag for spesifikasjon (ISO 1873-1:1995)

Språk: enIngen erstatning

NS-EN ISO 1874-1:2010

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)

Plast - Støpe- og ekstruderingsmasser av polyamid (PA) - Del 1: Betegnelsessystem og spesifikasjonsgrunnlag (ISO 1874-1:2010)

Språk: enIngen erstatning

NS-EN ISO 13844:2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000)

Rørledninger av plast - Muffeforbindelser av polyvinylklorid uten mykner (PVC-U) med elastomeriske tetningsringer for rør av PVC-U - Metode for prøving av tetthet ved undertrykk (ISO 13844:2000)

Språk: enIngen erstatning

NS-EN ISO 13845:2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for rør av polyvinylklorid uten mykner (PVC-U) - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2000)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 98 av 120

Page 99: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

85 Papirteknikk

85 Papirteknikk

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 8254-3

Paper and board - Measurement of specular gloss - Part 3: 20º gloss

Språk: enKommentarfrist: 2015-08-18

ISO-standarder

ISO 1762:2015

Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C

Språk: enErstatter A00008:20:031630

ISO 2144:2015

Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C

Språk: enErstatter A00008:20:025911

ISO 5636-6:2015

Paper and board -- Determination of air permeance (medium range) -- Part 6: Oken method

Språk: en

Fastsatte norske standarder

NS-EN ISO 12625-9:2015

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)Mykpapir og mykpapirprodukter - Del 9: Bestemmelse av bruddstyrke ved ballmetode (ISO 12625-9:2015)

Språk: en

NS-EN ISO 12625-15:2015

Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)

Mykpapir og mykpapirprodukter - Del 15: Bestemmelse av optiske egenskaper - Måling av lysstyrke og farger med lystype C/2° (innendørs dagslys) (ISO 12625-15:2015)

Språk: en

NS-EN ISO 12625-16:2015

Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)

Mykpapir og mykpapirprodukter - Del 16: Bestemmelse av optiske egenskaper - Opasitet - Diffus reflektansmetode (ISO 12625-16:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN ISO 12625-9:2005

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2005)Mykpapir og mykpapirprodukter - Del 9: Bestemmelse av bruddstyrke (ISO 12625-9:2005)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 99 av 120

Page 100: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

87 Maling- og lakkindustri

87 Maling- og lakkindustri

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 12632

Graphic technology -- Ink, paper and labels -- Requirements on hot alkali penetration and resistance

Språk: enKommentarfrist: 2015-07-06

ISO/DIS 19396-1

Paints and varnishes -- Determination of pH value -- Part 1: pH electrodes with glass membrane

Språk: enKommentarfrist: 2015-10-15

ISO/DIS 19396-2

Paints and varnishes -- Determination of pH value -- Part 2: pH electrodes with ISFET technology

Språk: enKommentarfrist: 2015-10-15

ISO/DIS 19399

Paints and varnishes -- Wedge-cut method for determination of film thickness (scribe and drill method)

Språk: enKommentarfrist: 2015-09-13

ISO-standarder

ISO 2834-2:2015

Graphic technology -- Laboratory preparation test prints -- Part 2: Liquid printing inks

Språk: enErstatter A00008:20:041295

Rapporter fra CEN (CR)

CEN/TS 16498:2013

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin stainingMaling og lakk - Beleggmaterialer og beleggsystemer for utvendig treverk - Vurdering av garvesyre misfarging

Språk: en

CEN/TS 16499:2013

Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood

Maling og lakk - Beleggmaterialer og beleggsystemer for utvendig treverk - Motstand mot klumping av maling og lakk på treverk

Språk: en

CEN/TS 16700:2014

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrateSpråk: en

CEN/TS 16766:2015

Bio-based solvents - Requirements and test methods

Språk: en

Listenummer: 11/2015 Side: 100 av 120

Page 101: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

87 Maling- og lakkindustri

Fastsatte norske standarder

NS-EN 16623:2015

Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking

Maling og lakk - Reaktive belegg for brannbeskyttelse av metalliske underlag - Definisjoner, krav, egenskaper og merking

Språk: en

NS-EN ISO 3679:2015

Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)Bestemmelse av flamme/ingen flamme og flammepunkt - Rask likevektsmetode med lukket digel (ISO 3679:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN ISO 3679:2004

Determination of flash point - Rapid equilibrium closed cup method (ISO 3679:2004)Bestemmelse av flammepunkt - Hurtiglikevektsmetode med lukket digel (ISO 3679:2004)

Språk: enIngen erstatning

NS-EN ISO 3680:2004

Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)Bestemmelse av flamme/ingen flamme - Hurtiglikevektsmetode med lukket digel (ISO 3680:2004)

Språk: enIngen erstatning

90

Fastsatte norske standarder

NS-EN 13445-3:2014/A1:2015

Amendment A1 - Unfired pressure vessels - Part 3: DesignEndringsblad A1 - Ikke-fyrte trykkbeholdere - Del 3: Konstruksjon

Språk: en

91 Bygningsmaterialer og bygging

Standardforslag til høring - europeiske (CEN)

prEN 1111

Sanitary Tapware - Thermostatic Mixing Valves (PN 10) - General Technical SpecificationSanitær tappearmatur - Termostatbatterier (PN 10) - Generelle tekniske krav

Språk: enKommentarfrist: 2015-09-27

prEN 1287

Sanitary Tapware - Low pressure thermostatic mixing valves - General Technical SpecificationSanitær tappearmatur - Termostatbatterier i lavtrykksanlegg - Generelle tekniske krav

Språk: enKommentarfrist: 2015-09-27

Listenummer: 11/2015 Side: 101 av 120

Page 102: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

prEN 12620

Aggregates for concreteTilslag for betong

Språk: enKommentarfrist: 2015-09-27

prEN 12635

Industrial, commercial and garage doors and gates - Information for usePorter - Bruksanvisning

Språk: enKommentarfrist: 2015-09-14

prEN 13043

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areasTilslag for bituminøse masser og overflatebehandlinger for veger, flyplasser og andre trafikkarealer

Språk: enKommentarfrist: 2015-09-27

prEN 13075-1

Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 1: Bestemmelse av brytningsverdi for kationiske bitumenemulsjoner med mineralfillermetoden

Språk: enKommentarfrist: 2015-07-19

prEN 13075-2

Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 2: Bestemmelse av blandetid med mineralfiller for kationiske bitumenemulsjoner

Språk: enKommentarfrist: 2015-07-19

prEN 13139

Aggregates for mortarTilslag for mørtel

Språk: enKommentarfrist: 2015-09-27

prEN 13203-4

Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity

Gassfyrte husholdningsapparater som produserer varmt vann - Del 4: Vurdering av energiforbruk av gassfyrte varmeapparater (MCHP) som produserer varmt vann og elektrisitet

Språk: enKommentarfrist: 2015-08-02

prEN 13242

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road constructionTilslag for mekanisk stabiliserte og hydraulisk stabiliserte materialer til bruk i bygg- og anleggsarbeid og vegbygging

Språk: enKommentarfrist: 2015-09-27

prEN 13383-1

Armourstone - Part 1: SpecificationVassbyggingsstein (Armourstone) - Del 1: Spesifikasjoner

Språk: enKommentarfrist: 2015-09-27

Listenummer: 11/2015 Side: 102 av 120

Page 103: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

prEN 13450

Aggregates for railway ballastTilslag for jernbaneballast

Språk: enKommentarfrist: 2015-09-27

prEN 14846

Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methodsBygningsbeslag - Låse og fallelåser - Elektromekanisk drevne låser og sluttstykker - Krav og prøvingsmetoder

Språk: enKommentarfrist: 2015-09-27

prEN 15316-4-10

Heating systems and water based cooling systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems

Varmesystemer og vannbaserte kjølesystemer i bygninger - Metode for beregning av systemets energikrav og systemvirkningsgrader - Del 4-10: Systemer for vindkraftgeneratorer

Språk: enKommentarfrist: 2015-07-19

prEN 16236

Evaluation of conformity of aggregates - Initial Type Testing and Factory Production ControlSamsvarsvurdering av tilslag - Innledende typeprøving og produksjonskontroll

Språk: enKommentarfrist: 2015-09-27

prEN 16382

Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation productsSpråk: enKommentarfrist: 2015-08-16

prEN 16383

Thermal insulation products for buildings applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)Språk: enKommentarfrist: 2015-08-16

prEN 16516

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air

Språk: enKommentarfrist: 2015-09-21

prEN 16798-1

Energy performance of buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6

Bygningenes energiytelse – Del 1: Inneklimaparametere for dimensjonering og vurdering av bygningers energiytelse inkludert inneluftkvalitet, termisk miljø, belysning og akustikk – Modul M1-6

Språk: enKommentarfrist: 2015-09-21

prEN 16798-5-2

Energy performance of buildings - Modules M5-6, M5-8 - Ventilation for buildings - Calculation methods for energy requirements of ventilation systems - Part 5-2: Distribution and generation (revision of EN 15241) - method 2Språk: enKommentarfrist: 2015-07-19

Listenummer: 11/2015 Side: 103 av 120

Page 104: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

prEN 16798-5-1

Energy performance of buildings - Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8 - Ventilation for buildings - Calculation methods for energy requirements of ventilation and air conditioning systems - Part 5-1: Distribution and generation (revision of EN 15241) - Method 1Språk: enKommentarfrist: 2015-08-31

prEN 16798-11

Energy performance of buildings - Part 11: Module M4-3- Calculation of the design cooling load

Språk: enKommentarfrist: 2015-08-09

prEN 16849

Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance

Språk: enKommentarfrist: 2015-07-19

prEN 16854

Thermal insulation products for building equipment and industrial installations - Determination of soot fire resistance of thermal insulation products for the use in chimneysSpråk: enKommentarfrist: 2015-08-09

prEN 16863

Thermal insulation products for buildings - Factory made reflective insulation products (RI) - Specification

Språk: enKommentarfrist: 2015-09-14

prEN 16864

Building hardware - Mechatronic padlocks - Requirements and test methodsBygningsbeslag - Eelektromekaniske hengelåser - Krav og prøvingsmetoder

Språk: enKommentarfrist: 2015-09-14

prEN 16867

Building hardware - Mechatronic door furniture - Requirements and test methodsBeslag - Mekatronisk dørbeslag - Krav og prøvingsmetoder

Språk: enKommentarfrist: 2015-08-23

prEN ISO 6946 rev

Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO/DIS 6946:2015)

Bygningskomponenter og -elementer - Varmemotstand og varmegjennomgang - Beregningsmetoder (ISO/DIS 6946:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 10211

Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO/DIS 10211:2015)Kuldebroer i bygningskonstruksjoner - Varmestrømmer og overflatetemperaturer - Detaljerte beregninger

Språk: enKommentarfrist: 2015-07-31

prEN ISO 10545-16 rev

Ceramic tiles - Part 16: Determination of small colour differences and light reflectance values (ISO/DIS 10545-16:2015)

Språk: enKommentarfrist: 2015-08-14

Listenummer: 11/2015 Side: 104 av 120

Page 105: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

prEN ISO 13370

Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO/DIS 13370:2015)Bygningers termiske egenskaper - Varmeoverføring via grunnen - Beregningsmetoder (ISO/DIS 13370:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 13786

Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO/DIS 13786:2015)Bygningskomponenters termiske egenskaper - Dynamiske termiske egenskaper - Beregningsmetoder (ISO/DIS 13786:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 13789

Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO/DIS 13789:2015)

Bygningers termiske egenskaper - Varmetapskoeffisient på grunn av varmegjennomgang og ventilasjon - Beregningsmetode (ISO/DIS 13789:2015)

Språk: enKommentarfrist: 2015-07-31

prEN ISO 14683

Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO/DIS 14683:2015)

Kuldebroer i bygningskonstruksjoner - Lineær varmegjennomgangskoeffisient - Forenklede beregningsmetoder og normalverdier (ISO/DIS 14683:2015)

Språk: enKommentarfrist: 2015-07-23

prEN ISO 16890-3

Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the airflow resistance versus the mass of test dust capturedSpråk: enKommentarfrist: 2015-08-07

prEN ISO 16890-4

Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO/DIS 16890-4:2015)Språk: enKommentarfrist: 2015-08-07

Standardforslag til høring - internasjonale (ISO)

ISO/DIS 6946

Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation methodBygningskomponenter og -elementer - Varmemotstand og varmegjennomgangskoeffisient - Beregningsmetode

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 6946

Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation method

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 10211

Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculationsKuldebroer i bygningskonstruksjoner - Varmestrømmer og overflatetemperaturer - Detaljerte beregninger

Språk: enKommentarfrist: 2015-07-31

Listenummer: 11/2015 Side: 105 av 120

Page 106: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

ISO/DIS 10211

Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 10545-16

Ceramic tiles -- Part 16: Determination of small colour differences and light reflectance values

Språk: enKommentarfrist: 2015-10-11

ISO/DIS 10545-16

Ceramic tiles - Part 16: Determination of small colour differencesKeramiske fliser - Del 16: Bestemmelse av små fargeforskjeller

Språk: enKommentarfrist: 2015-08-14

ISO/DIS 13370

Thermal performance of buildings -- Heat transfer via the ground -- Calculation methodsBygningers termiske egenskaper - Varmeoverføring via grunnen - Beregningsmetoder

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 13370

Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 13786

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 13786

Thermal performance of building components -- Dynamic thermal characteristics -- Calculation methods

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 13789

Thermal performance of buildings -- Transmission and ventilation heat transfer coefficients -- Calculation methodBygningers termiske egenskaper - Varmetapskoeffisienter på grunn av varmegjennomgang og ventilasjon - Beregningsmetode

Språk: enKommentarfrist: 2015-07-31

ISO/DIS 13789

Thermal performance of buildings -- Transmission and ventilation heat transfer coefficients -- Calculation method

Språk: enKommentarfrist: 2015-09-27

ISO/DIS 14683

Thermal bridges - Calculation of heat flows and surface temperatures - Simplified methods and generally accepted design values

Språk: enKommentarfrist: 2015-07-23

ISO/DIS 14683

Thermal bridges in building construction -- Linear thermal transmittance -- Simplified methods and default values

Språk: enKommentarfrist: 2015-09-20

Listenummer: 11/2015 Side: 106 av 120

Page 107: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

ISO/DIS 16890-3

Air filters for general ventilation -- Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust capturedSpråk: enKommentarfrist: 2015-08-07

ISO/DIS 16890-4

Air filters for general ventilation -- Part 4: Conditioning method to determine the minimum fractional test efficiency

Språk: enKommentarfrist: 2015-08-07

ISO-standarder

ISO 4633:2015

Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials

Språk: enErstatter A00008:20:032972

Rapporter fra CEN (CR)

CEN/TR 81-12:2014

Safety rules for the construction and installation of lifts - Basics and interpretations - Part 12: Use of EN 81-20 and EN 81-50 in specific marketsSpråk: en

CEN/TR 1749:2014

European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)

Språk: en

CEN/TR 13737-2:2014

Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standardsSpråk: en

CEN/TR 13801:2014

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installationSpråk: en

CEN/TR 14245:2014

Cement - Guidelines for the application of EN 197-2 Conformity Evaluation

Språk: en

CEN/TR 16496:2013

Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods

Språk: en

CEN/TR 16563:2013

Principles of the equivalent durability procedure

Språk: en

CEN/TR 16625:2013

Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % StatisticSpråk: en

Listenummer: 11/2015 Side: 107 av 120

Page 108: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

CEN/TR 16632:2014

Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and RecommendationsSpråk: en

CEN/TR 16639:2014

Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept

Språk: en

CEN/TR 16676:2014

Energy losses by industrial door

Språk: en

CEN/TR 16787:2014

Industrial Gas Installation - Guideline

Språk: en

CEN/TS 115-4:2014

Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards

Språk: en

CEN/TS 1452-7:2014

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformitySpråk: en

CEN/TS 12201-7:2014

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformitySpråk: en

CEN/TS 14807:2013

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

Rørledningssystemer – Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) – Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger

Språk: en

CEN/TS 15548-1:2014

Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °CSpråk: en

CEN/TS 15963:2014

Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Bitumen og bituminøse bindemidler - Bestemmelse av bruddseighetstemperatur ved trepunkts bøyeprøving på prøve med innsnitt

Språk: en

CEN/TS 16459:2013

External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187

Språk: en

CEN/TS 16516:2013

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor airByggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft

Språk: en

Listenummer: 11/2015 Side: 108 av 120

Page 109: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

CEN/TS 16628:2014

Energy Performance of Buildings - Basic Principles for the set of EPB standards

Språk: en

CEN/TS 16629:2014

Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards

Språk: en

CEN/TS 16637-1:2014

Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps

Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger

Språk: en

CEN/TS 16637-2:2014

Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching testByggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving

Språk: en

Fastsatte norske standarder

NS-EN 1469:2015

Natural stone products - Slabs for cladding - RequirementsNatursteinprodukter - Plater for kledninger - Krav

Språk: en

NS-EN 1993-1-1:2005+A1:2014+NA:2015

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsEurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: en

NS-EN 1993-1-1:2005+A1:2014/NA:2015

National Annex NA - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsNasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: en

NS-EN 1993-1-1:2005+A1:2014/AC:2015

Corrigendum AC - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsRettelsesblad AC - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: en

NS-EN 12050-1:2015

Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matterHeveanlegg for avløpsvann fra bygninger og terreng - Del 1: Heveanlegg for fekalieholdig avløpsvann

Språk: en

NS-EN 12050-2:2015

Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewaterHeveanlegg for avløpsvann fra bygninger og terreng - Del 2: Heveanlegg for fekaliefritt avløpsvann

Språk: en

NS-EN 12050-3:2015

Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applicationsHeveanlegg for avløpsvann fra bygninger og terreng - Del 3: Heveanlegg for begrenset bruk

Språk: en

Listenummer: 11/2015 Side: 109 av 120

Page 110: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

NS-EN 12050-4:2015

Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter

Heveanlegg for avløpsvann fra bygninger og terreng - Del 4: Tilbakeslagsventiler for fekaliefritt og fekalieholdig avløpsvann

Språk: en

NS-EN 12057:2015

Natural stone products - Modular tiles - RequirementsNatursteinprodukter - Modulfliser - Krav

Språk: en

NS-EN 12058:2015

Natural stone products - Slabs for floors and stairs - RequirementsNatursteinprodukter - Plater for gulv og trapper - Krav

Språk: en

NS-EN 12480:2015

Gas meters - Rotary displacement gas metersGassmålere - Fortrengningsmålere

Språk: en

NS-EN 13120:2009+A1:2014/AC:2015

Corrigendum AC - Internal blinds - Performance requirements including safetyRettelsesblad AC - Innvendige persienner - Krav til ytelse og sikkerhet

Språk: en

NS-EN 13165:2012+A1:2015

Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av stivt polyuretanskum (PU) - Krav

Språk: en

NS-EN 13166:2012+A1:2015

Thermal insulation products for buildings - Factory made phenolic foam (PF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av fenolskum (PF) - Krav

Språk: en

NS-EN 13167:2012+A1:2015

Thermal insulation products for buildings - Factory made cellular glass (CG) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av celleglass (CG) - Krav

Språk: en

NS-EN 13168:2012+A1:2015

Thermal insulation products for buildings - Factory made wood wool (WW) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av treull (WW) - Krav

Språk: en

NS-EN 13169:2012+A1:2015

Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert perlitt (EPB) - Krav

Språk: en

NS-EN 13170:2012+A1:2015

Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert kork (ICB) - Krav

Språk: en

Listenummer: 11/2015 Side: 110 av 120

Page 111: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

NS-EN 13171:2012+A1:2015

Thermal insulation products for buildings - Factory made wood fibre (WF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av trefiber (WF) - Krav

Språk: en

NS-EN 15059:2009+A1:2015

Snow grooming equipment - Safety requirementsLøypemaskiner - Sikkerhetskrav

Språk: en

NS-EN 16012:2012+A1:2015

Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performanceVarmeisolasjon i bygninger - Reflekterende isolasjonsprodukter - Bestemmelse av deklarert termisk ytelse

Språk: en

NS-EN 16069:2012+A1:2015

Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av polyetylenskum (PEF) - Krav

Språk: en

NS-EN 16153:2013+A1:2015

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

Gjennomskinnelige flate flersjiktsplater av polykarbonat (PC) for innvendig og utvendig bruk i tak, vegger og himlinger - Krav og prøvingsmetoder

Språk: en

NS-EN 16497-1:2015

Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applicationsSkorsteiner - Systemskorsteiner av betong - Del 1: Ikke-balanserte røykavtrekk

Språk: en

NS-EN ISO 13844:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)

Rørledninger av plast - Muffeforbindelser med elastomeriske tetningsringer for trykkrør av plast - Metode for prøving av tetthet ved undertrykk, avbøying og deformasjon (ISO 13844:2015)

Språk: en

NS-EN ISO 13845:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for trykkrør av termoplast - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2015)

Språk: en

NS-EN ISO 15957:2015

Test dusts for evaluating air cleaning equipment (ISO 15957:2015)Prøvingsstøv for evaluering av luftrensingsutstyr (ISO 15957:2015)

Språk: en

Tilbaketrukne norske standarder

NS-EN 1469:2004

Natural stone products - Slabs for cladding - RequirementsNatursteinprodukter - Plater for kledninger - Krav

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 111 av 120

Page 112: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

NS-EN 1469:2004

Natural stone products - Slabs for cladding - RequirementsNatursteinprodukter - Plater for kledninger - Krav

Språk: noIngen erstatning

NS-EN 1993-1-1:2005+NA:2008

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsEurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: noIngen erstatning

NS-EN 1993-1-1:2005/NA:2008

National Annex NA - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsNasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: noIngen erstatning

NS-EN 1993-1-1:2005+NA:2008

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsEurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: enIngen erstatning

NS-EN 1993-1-1:2005/NA:2008/AC:2010

Corrigendum AC - National Annex NA - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings

Rettelsesblad AC - Nasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: noIngen erstatning

NS-EN 1993-1-1:2005/NA:2008

National Annex NA - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsNasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: enIngen erstatning

NS-EN 1993-1-1:2005/AC:2009

Corrigendum AC - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsRettelsesblad AC - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: enIngen erstatning

NS-EN 12050-1:2001

Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter

Heveanlegg for avløpsvann fra bygninger og terreng - Prinsipper for konstruksjon og prøving - Del 1: Heveanlegg for fekalieholdig avløpsvann

Språk: enIngen erstatning

NS-EN 12050-2:2000

Wastewater liftings plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater

Heveanlegg for avløpsvann fra bygninger og terreng - Prinsipper for konstruksjon og prøving - Del 2: Heveanlegg for fekaliefritt avløpsvann

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 112 av 120

Page 113: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

NS-EN 12050-3:2000

Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications

Heveanlegg for avløpsvann fra bygninger og terreng - Prinsipper for konstruksjon og prøving - Del 3: Heveanlegg for fekalieholdig avløpsvann for avgrensede bruksområder

Språk: enIngen erstatning

NS-EN 12050-4:2000

Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter.

Heveanlegg for avløpsvann fra bygninger og terreng - Prinsipper for konstruksjon og prøving - Del 4: Tilbakeslagsventiler for fekaliefritt og fekalieholdig avløpsvann

Språk: enIngen erstatning

NS-EN 12057:2004

Natural stone products - Modular tiles - RequirementsNatursteinprodukter - Modulære fliser - Krav

Språk: enIngen erstatning

NS-EN 12058:2004

Natural stone products - Slabs for floors and stairs - RequirementsNatursteinprodukter - Plater for gulv og trapper - Krav

Språk: enIngen erstatning

NS-EN 12480:2002

Gas meters - Rotary displacement gas metersGassmålere - Fortrengningsmålere

Språk: enIngen erstatning

NS-EN 12480:2002/A1:2006

Amendment A1 - Gas meters - Rotary displacement gas metersEndringsblad A1 - Gassmålere - Fortrengningsmålere

Språk: enIngen erstatning

NS-EN 13165:2012

Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av stivt polyuretanskum (PU) - Krav

Språk: enIngen erstatning

NS-EN 13166:2012

Thermal insulation products for buildings - Factory made phenolic foam (PF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av fenolskum (PF) - Krav

Språk: enIngen erstatning

NS-EN 13167:2012

Thermal insulation products for buildings - Factory made cellular glass (CG) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av celleglass (CG) - Krav

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 113 av 120

Page 114: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

NS-EN 13168:2012

Thermal insulation products for buildings - Factory made wood wool (WW) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av treull (WW) - Krav

Språk: enIngen erstatning

NS-EN 13169:2012

Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert perlitt (EPB) - Krav

Språk: enIngen erstatning

NS-EN 13170:2012

Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert kork (ICB) - Krav

Språk: enIngen erstatning

NS-EN 13171:2012

Thermal insulation products for buildings - Factory made wood fibre (WF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av trefiber (WF) - Krav

Språk: enIngen erstatning

NS-EN 15059:2009

Snow grooming equipment - Safety requirementsLøypemaskiner - Sikkerhetskrav

Språk: enIngen erstatning

NS-EN 16012:2012

Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performanceVarmeisolasjon i bygninger - Reflekterende isolasjonsprodukter - Bestemmelse av deklarert termisk ytelse

Språk: enIngen erstatning

NS-EN 16069:2012

Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av polyetylenskum (PEF) - Krav

Språk: enIngen erstatning

NS-EN 16153:2013

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

Gjennomskinnelige flate flersjiktsplater av polykarbonat (PC) for innvendig og utvendig bruk i tak, vegger og himlinger - Krav og prøvingsmetoder

Språk: enIngen erstatning

NS-EN ISO 3098-0:1997

Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997)Teknisk produktsdokumentasjon - Skrift - Del 0: Generelle krav (ISO 3098-0:1997)

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 114 av 120

Page 115: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

91 Bygningsmaterialer og bygging

NS-EN ISO 13844:2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000)

Rørledninger av plast - Muffeforbindelser av polyvinylklorid uten mykner (PVC-U) med elastomeriske tetningsringer for rør av PVC-U - Metode for prøving av tetthet ved undertrykk (ISO 13844:2000)

Språk: enIngen erstatning

NS-EN ISO 13845:2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for rør av polyvinylklorid uten mykner (PVC-U) - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2000)

Språk: enIngen erstatning

93 Anleggsvirksomhet

Standardforslag til høring - europeiske (CEN)

EN 13674-1:2011/prA1

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and aboveJernbane - Spor - Skinner - Del 1: Vignolskinner fra 46 kg/m

Språk: enKommentarfrist: 2015-07-05

prEN 1793-1

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditionsSpråk: enKommentarfrist: 2015-09-14

prEN 12675

Traffic signal controllers - Functional safety requirementsStyreapparater for trafikklyssignaler - Krav til funksjonssikkerhet

Språk: enKommentarfrist: 2015-07-19

prEN 12697-13

Bituminous mixtures - Test methods - Part 13: Temperature measurement

Språk: enKommentarfrist: 2015-07-26

prEN 13146-10

Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance

Språk: enKommentarfrist: 2015-08-09

prEN 14504

Inland navigation vessels - Floating landing stages and floating bridges on inland waters - Requirements, testsInnlandsnavigasjonsfartøy - Flytende landingstadier og flytende broer på innlandsvann - Krav, prøvinger

Språk: enKommentarfrist: 2015-07-19

prEN 16432-2

Railway applications - Ballastless track systems - Part 2: Subsystems and components

Språk: enKommentarfrist: 2015-07-12

Listenummer: 11/2015 Side: 115 av 120

Page 116: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

93 Anleggsvirksomhet

prEN 16840

Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz and at least 250 AInnlandsfartøyer - Elektrisk shore tilkobling, tre-fase strøm 400 V, 50 Hz og minst 250 A

Språk: enKommentarfrist: 2015-07-19

prEN 16843

Railway applications - Infrastructure - Mechanical requirements for joints in running rails

Språk: enKommentarfrist: 2015-07-12

Rapporter fra CEN (CR)

CEN/TR 13201-1:2014

Road lighting - Part 1: Guidelines on selection of lighting classes

Språk: en

CEN/TR 16513:2014

Railway applications - Track - Survey of track geometry quality

Språk: en

CEN/TR 16626:2014

Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures

Språk: en

CEN/TS 12633:2014

Method of polishing specimens prior to the measurement of slip and skid resistanceMetode for polering av prøvelegemer forut for måling av skli- og gli-motstand

Språk: en

CEN/TS 13286-54:2014

Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixturesSpråk: en

CEN/TS 13714:2013

Characterization of sludges - Sludge management in relation to use or disposalKarakterisering av slam - Disponering av slam

Språk: en

CEN/TS 14807:2013

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

Rørledningssystemer – Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) – Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger

Språk: en

CEN/TS 15901-15:2014

Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAGSpråk: en

CEN/TS 16272-5:2014

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions

Jernbane - Spor - Støybarrierer og relaterte innretninger som reagerer på luftbåren lydspredning - Test metode for å bestemme akustisk ytelse - Del 5: Indre egenskaper - På stedet verdier av lydrefleksjon under direkte lydfeltsforhold

Språk: en

Listenummer: 11/2015 Side: 116 av 120

Page 117: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

93 Anleggsvirksomhet

Fastsatte norske standarder

NS-EN 1793-4:2015

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction

Innretninger for reduksjon av vegtrafikkstøy - Prøvingsmetode for bestemmelse av akustiske egenskaper - Del 4: Produktspesifikke egenskaper - In situ-verdier av lyddiffraksjon

Språk: en

Tilbaketrukne norske standarder

NS 8011:1982

Geotechnical testing - Laboratory methods - DensityGeoteknisk prøving - Laboratoriemetoder - Densitet

Språk: noIngen erstatning

NS 8013:1982

Geotechnical testing - Laboratory methods - Water contentGeoteknisk prøving - Laboratoriemetoder - Vanninnhold

Språk: noIngen erstatning

97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport

Standardforslag til høring - europeiske (CEN)

prEN 71-12

Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substancesSikkerhet for leketøy - Del 12: N-nitrosaminer og N-nitrosamindannende stoffer

Språk: enKommentarfrist: 2015-07-26

prEN 958

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods

Fjellklatringsutstyr - Falldempende system for bruk i (permanente) klatrestiger - Sikkerhetskrav og prøvingsmetoder

Språk: enKommentarfrist: 2015-09-14

prEN 12572-1 rev

Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection pointsKlatreanlegg - Del 1: Sikkerhetskrav og prøvingsmetoder for ACS med sikkerhetspunkter

Språk: enKommentarfrist: 2015-09-27

prEN 12572-2 rev

Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering wallsKlatreanlegg - Del 2: Sikkerhetskrav og prøvingsmetoder for bouldervegger

Språk: enKommentarfrist: 2015-09-27

Listenummer: 11/2015 Side: 117 av 120

Page 118: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport

prEN 12868 rev

Child use and care articles - Methods for determining the release of N-Nitrosamines and N-Nitrosatable substances from elastomer or rubber teats and soothers

Spedbarns- og småbarnsprodukter - Metoder for å bestemme N-nitrosaminer og N-nitrosamindannende stoffer som avgis fra flaskesmokker og narresmokker av gummi eller andre elastomerer

Språk: enKommentarfrist: 2015-08-16

prEN 16853

Conservation of cultural heritage - Conservation process - Decision making, planning and implementation

Språk: enKommentarfrist: 2015-07-26

prEN 16855

Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits

Språk: enKommentarfrist: 2015-08-16

prEN 16869

Design/construction of Via Ferrata

Språk: enKommentarfrist: 2015-09-27

prEN 16873

Conservation of cultural heritage - Guidelines for management of waterlogged wood on terrestrial sites of archaeological significance

Bevaring av kulturminner - Veiledning for forvaltning av vannmettet tre i områder på land av arkeologisk betydning

Språk: enKommentarfrist: 2015-09-14

ISO-standarder

ISO 8124-5:2015

Safety of toys -- Part 5: Determination of total concentration of certain elements in toys

Språk: en

ISO 10958-2:2015

Snowboards -- Binding mounting area -- Part 2: Requirements and test methods for snowboards with inserts

Språk: enErstatter A00008:20:037795

ISO/TR 20183:2015

Sports and other recreational facilities and equipment -- Injury and safety definitions and thresholds -- Guidelines for their inclusion in standardsSpråk: en

Rapporter fra CEN (CR)

CEN/TR 15071:2014

Safety of toys - National translations of warnings and instructions for use in EN 71 series

Språk: en

CEN/TR 15371:2014

Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2 and EN 71-8

Språk: en

CEN/TR 16411:2014

Child use and care articles - 2013 compiled interpretations of CEN/TC 252 standards

Språk: en

Listenummer: 11/2015 Side: 118 av 120

Page 119: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport

CEN/TR 16467:2013

Playground equipment accessible for all childrenLekeplassutstyr tilgjengelig for alle barn

Språk: en

CEN/TR 16512:2015

Child use and care articles - Guidelines for the safety of children’s slings

Språk: en

CEN/TR 16598:2014

Collection of rationales for EN 1176 - RequirementsInnsamling av begrunnelser for EN 1176 - Krav

Språk: en

CEN/TR 16792:2014

Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety

Språk: en

CEN/TS 16163:2014

Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitionsBevaring av kulturminner - Utstillingsbelysning av kulturminne

Språk: en

CEN/TS 16354:2013

Laminate floor coverings - Underlays - Specification, requirements and test methods

Språk: en

CEN/TS 16611:2014

Furniture - Assessment of the surface resistance to microscratching

Språk: en

CEN/TS 16665:2014

Standing ladder durability test specification

Språk: en

CEN/TS 16717:2015

Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athleteSpråk: en

Fastsatte norske standarder

NS-EN 131-6:2015

Ladders - Part 6: Telescopic laddersStiger - Del 6: Teleskopstiger

Språk: en

NS-EN 14468-1:2015

Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methodsBordtennis - Del 1: Bordtennisbord, funksjons- og sikkerhetskrav, prøvingsmetoder

Språk: en

NS-EN 14468-2:2015

Table tennis - Part 2: Posts for net assemblies - Requirements and test methodsBordtennis - Del 2: Stenger for nettmontering - Krav og prøvingsmetoder

Språk: en

Listenummer: 11/2015 Side: 119 av 120

Page 120: Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag...... Geometrical tolerancing - Tolerances of form, orientation, location ... Geometrical tolerancing -- Tolerances

97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport

NS-EN 14533:2015

Textiles and textile products - Burning behaviour of bedding items - Classification schemeTekstiler og tekstilprodukter - Brennbarheten til sengetøy - Klassifiseringsskjema

Språk: en

NS-EN 16122:2012/AC:2015

Corrigendum AC - Domestic and non-domestic storage furniture - Test methods for the determination of strength, durability and stability

Rettelsesblad AC - Oppbevaringsmøbler til husholdningsbruk og ikke-husholdningsbruk - Prøvingsmetoder for bestemmelse av styrke, holdbarhet og stabilitet

Språk: en

Tilbaketrukne norske standarder

NS-EN 14468-1:2004

Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methodsBordtennis - Del 1: Bordtennisbord, funksjons- og sikkerhetskrav, prøvingsmetoder

Språk: enIngen erstatning

NS-EN 14468-2:2005

Table tennis - Part 2: Posts for net assemblies - Requirements and test methodsBordtennis - Del 2: Stenger for nettmontering - Krav og prøvingsmetoder

Språk: enIngen erstatning

NS-EN 14533:2003

Textiles and textile products - Burning behaviour of bedding items - Classification schemeTekstiler og tekstilprodukter - Brennbarheten til sengetøy - Klassifiseringsskjema

Språk: enIngen erstatning

Listenummer: 11/2015 Side: 120 av 120