Standard Profile

All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any

means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.

10-2015-V.03

Standard Profiles

SP - H SQUARE TUBES 18

SP - I ROUND TUBES 19-20

SP - J FLAT BARS 21-22

SP - K I-SECTIONS 23

SP - L RODS 24

SP - G RECTANGULAR TUBES 15-17

SP - F T-SECTIONS 14

SP - E CHANNELS 12-13

SP - C EQUAL ANGLES 10

SP - D UNEQUAL ANGELS 11

SP - A GULF EXTRUSIONS 03

SP - B QUALITY AND CERTIFICATIONS 04 - 09

3

Gulf Extrusions Co. LLC, the flagship company of the Al Ghurair Group of Companies, was founded in 1978, Dubai, UAE where it has over the years earned the reputation known as one of the most innovative and reliable companies in the Middle East.

Located close to its raw material supplier Dubai Aluminium Company Ltd (DUBAL), the world’s largest single smelter site, Gulf Extrusions has become one of the largest extrusion plants in the region.

Gulf Extrusions quality products can be seen in many of today’s progressive structures. The company was formed with the sole purpose to meet the increasing demands for aluminium extrusions in domestic, regional and international markets.

Gulf Extrusions six presses and highly skilled workforce are able to produce 65,000 metric tonnes per annum with a rated capacity of 24,000 tonnes for powder coated finish, 6,000 tonnes for anodized finish and can offer more than 10,000 profile designs. These extrusions cover numerous industries ranging from architectural to transportation, engineering to structural sections, components for household items, HVAC and customized products.

During the progressive stages of Gulf Extrusions, from its inception to expansion, the company not only has acquired a majority share in the local market, it has also made its presence felt globally throughout the GCC countries, Indian sub -continent, South East Asia, Australia, Africa, Europe and Canada.

Our commitment and utmost priority is to provide customers with the finest quality of aluminium extrusions.

Gulf Extrusions looks ahead to inevitable challenges and product advancements of the new era.

GULFEXTRUSIONS

GULF EXTRUSIONS SP-A

4

QUALITY STANDARD & CERTIFICATIONSSP-B

Quality is an inseparable element of all activities carried out at Gulf Extrusions. Gulf Extrusions is dedicated to respond and deliver on time, high quality, tailor-made and cost effective products. The management and staff are committed to implement a comprehensive and integrated Quality Management System in accordance with the International Quality Standards of ISO 9001 and ISO 14001.

Anodizing Finish:

• BS EN 12373-1 2001 Clause 7 (BS:6161 Part 6)• BS:3987 Clause 2, 3, 5, 6• Appendix- A, B, C, D, E, F, G, H, J, K, L Minimum Film Thickness- 16 Microns

Powder Coated Finish:

• BS:6496 Clause: 10.4, 10.5, 10.6, 10.7 & 10.8• ISO 2360 / 2813 / 2409 / 2931• Minimum Film Thickness – 60 Microns

Extrusions Dimensions Tolerances:

• BS EN 755 - 9:2008 • BS EN 12020 - 2:2008• DIN 1748, DIN 17615• ASTM B221

INTERNATIONAL STANDARD COMPLIANCE

PRODUCT QUALITY CERTIFICATES

Qualicoat (European Powder Coaters Association):• A quality label for coating on metal for Architectural Applications• A product license under the control of EWAA (European Wrought Aluminium Association) in Zurich Switzerland

Qualanod (European Anodizers Association):• A quality label organization to guarantee high quality Aluminium Anodizing.• A product license under the control of EWAA (European Wrought Aluminum Association) in Zurich Switzerland

• SASO

• ESMA

Health & Safety:• OHSAS 18001 (Certification for occupational health & safety management)

Management:• ISO 9001 (Quality Management System)

• ISO/TS 16949:2009 (Management System)

Environment:• ISO 14001 (Environment Management System)

Membership in International Organization:• AAC member (Aluminium Anodizers Council - USA)• AEC member (Aluminum Extruders Council - USA)• DIN EN 15088

OHSAS 18001

5

QUALITY STANDARD & CERTIFICATIONS

ALLOY 6005A

Element Minimum Maximum

Si 0.50 0.90

Fe - 0.35

Cu - 0.30

Mn - 0.50

Mg 0.40 0.70

Cr - 0.30

Zn - 0.20

Ti - 0.10

Other Each - 0.05

Other Total - 0.15

Aluminium Remainder

ALLOY 6063


Si 0.20 0.60

Fe - 0.35

Cu - 0.10

Mn - 0.10

Mg 0.45 0.90

Cr - 0.10

Zn - 0.10

Ti - 0.10

Other Each - 0.05

Other Total - 0.15

Aluminium Remainder

ALLOY 6061


Si 0.40 0.80

Fe - 0.70

Cu 0.15 0.40

Mn - 0.15

Mg 0.8 1.20

Cr 0.04 0.35

Zn - 0.25

Ti - 0.15

Other Each - 0.05

Other Total - 0.15

Aluminium Remainder

ALLOY 6060


Si 0.30 0.60

Fe 0.10 0.30

Cu - 0.10

Mn - 0.10

Mg 0.35 0.60

Cr - 0.05

Zn - 0.15

Ti - 0.10

Other Each - 0.05

Other Total - 0.15

Aluminium Remainder

ALLOY 6082


Si 0.70 1.30

Fe - 0.50

Cu - 0.10

Mn 0.40 1.00

Mg 0.60 1.20

Cr 0.04 0.15

Zn - 0.20

Ti - 0.10

Other Each - 0.05

Other Total - 0.15

Aluminium Remainder

CHEMICAL COMPOSTIONS

SP-B

6

ANODIZING

A wide range of anodizing treatment options are possible for the aluminium profile sections of this system. The color choices from Gulf Extrusions range from Natural, Gold, and Bronze to Spectro colors (Red, Blue, Green, and Gray).

This surface treatment process involves first pre-treatment with scotch brite brushing for the unfinished profiles, and then subsequently fully immersing the aluminium profiles in an acidic electrolyte solution through which electric current is passed creating an anodic film on the profiles ranging from 5-30MICs.

The process is guaranteed and certified for use by QUALANOD - A quality label Organization to guarantee high quality aluminium anodizing and the company’s ISO 9001 certification.


7

QUALITY STANDARD & CERTIFICATIONS SP-B

Authorization to use the quality sign

8

POWDER COATING

• Horizontal & Vertical Powder coating lines with an Annual Capacity of 24 000 MT Powder Coating BS: 6496 Clause: 10.4, 10.5, 10.6, 10.7, & 10.8 ISO 2360/2813/2409/2931 Minimum Film Thickness - 60 Microns

A wide choice of colors for powder coating can be used for the aluminium profile sections.

From Gulf Extrusions the following powder types are available

• Polyester Façade (PE-F)• Super Durable Façade (SDF) & Hyper Durable Façade (HDF) (Where SDF & HDF are equivalent to Poly-Vinyldine DiFluoride (PVDF) in terms of corrosion performance)• Anti Bacterial (recommended to be used in Hospitals)• Anti Static (recommended for laboratories, electronics assembly buildings) and Heat Resistant in nature.

This surface treatment process involves the following pre-treatment

1. Degreasing2. Washing3. Etching4. Washing5. Chromatising6. Double washing in dematerialized water

Once completed, powder is applied using an electrostatic spraying process with charged powder particles, followed by curing in an oven under a controlled temperature of 180-200C for paint polymerization where the paint layer is at least 60mic.

This whole process is certified for use from QUALICOAT - A quality label for coating on metal for Architectural Applications.

GUARANTEE PERIOD:10 years for PE-F Quality25 years for PE-SDF


9

QUALITY STANDARD & CERTIFICATIONS SP-B

Authorization to use the quality sign

10

EQUAL ANGLESSP-C

Profile Reference A mm B mm Th mm Corner

RadiusKg. / m.

01060 8 8 2 -- 0.075

01059 13 13 2 -- 0.129

01047 15 15 1 -- 0.078

01017 15 15 1.3 -- 0.101

01012 15 15 1.5 -- 0.116

01045 17.5 17.5 1.5 -- 0.136

01050 20 20 1 -- 0.105

01018 20 20 1.2 -- 0.126

01028 20 20 1.3 -- 0.136

01013 20 20 1.4 -- 0.150

01001 20 20 1.5 -- 0.168

01042 20 20 2 -- 0.205

01048 25 25 1 -- 0.132

01029 25 25 1.2 -- 0.158

01014 25 25 1.4 -- 0.184

01002 25 25 2 -- 0.259

01041* 25 25 3 3 0.376

01054 29 29 2 -- 0.302

01049 30 30 1 -- 0.159

01036 30 30 1.1 -- 0.175

01010 30 30 1.5 -- 0.240

01024 30 30 2 -- 0.313

01007 30 30 2.5 -- 0.384

01019 30 30 2.8 -- 0.432

01031 30 30 3 -- 0.462

01025 30 30 4 -- 0.605

01003 30 30 5 -- 0.742

01037 35 35 3 -- 0.543


RadiusKg. / m.

01035 38 38 1.15 -- 0.232

01030 38 38 3.3 -- 0.648

01020 38 38 3.5 -- 0.685

01046 40 40 1.3 -- 0.276

01015 40 40 2 -- 0.422

01051 40 40 2.2 -- 0.462

01043 40 40 2.5 -- 0.523

01034 40 40 2.8 -- 0.584

01004 40 40 3 -- 0.623

01026 40 40 3.5 -- 0.723

01021 40 40 3.7 -- 0.762

01009 40 40 4 -- 0.820

01032 40 40 5.5 -- 1.106

01053 44.5 44.5 3 -- 0.697

01023 50 50 2 -- 0.529

01005 50 50 3 -- 0.785

01008 50 50 4 -- 1.036

01044 50 50 5 -- 1.283

01033 51 51 5.5 -- 1.433

01058 60 60 6 -- 1.846

01011 75 75 3 -- 1.195

01022 * 75 75 4.7 1 1.841

01027 76 76 4.8 -- 1.907

01052 90 90 3 -- 1.434

(*) denotes profile with corner radius / ‘V’ grooveCheck before order confirmation.

11

UNEQUEL ANGELS SP-D


RadiusKg. / m.

02013 20 10 1.5 -- 0.115

02036 20 12 6/3.5 -- 0.381

02040 22 8 3 -- 0.219

02052 30 13 3 -- 0.324

02045 30 15 3 -- 0.340

02008 30 17 2 -- 0.243

02001 30 20 1.5 -- 0.196

02034 30 20 2 -- 0.259

02009 30 25 4 -- 0.551

02016 31 14.7 2 -- 0.236

02048* 38 12 1.5 0.75 0.195

02024 38 33 2.8 -- 0.516

02020 38 34 3.2 -- 0.594

02014 38 34 3.5 -- 0.647

02015 40 20 2 -- 0.313

02033 40 35 3 -- 0.583

02025 45 27 1.2 -- 0.229

02017 47 15 1.5 -- 0.245

02044 50 25 3 -- 0.583

02037 53 20 3 -- 0.567

02042 55 28 2 -- 0.437

02053* 57 45 3 1 0.802

02012 60 18 6 -- 1.166

02003 66.5 44.5 4 -- 1.156

02046 68 29 2 -- 0.512

02002 70 25 2 -- 0.502

02004 75 50 3 -- 0.988

02043 76.2 25.4 3 -- 0.799


RadiusKg. / m.

02007 78.5 12.5 2 -- 0.479

02039 82 75 8 -- 3.218

02006 90 30 5 -- 1.553

02038 100 40 2 -- 0.745

02005* 100 50 6 8 2.365

02054 100 40 3 -- 1.109

02047 100 50 6 -- 2.331

02018 101.6 10 1.5 -- 0.446

02058 135 20 2 -- 0.826

02010 142 48.5 4 -- 2.014

02021 150 25 3 -- 1.393

02049 150 50 3 -- 1.596

02050 187 100 12/6 -- 7.484


12

CHANNELSSP-E


Profile Reference

A mm

B mm

Th mm

Th1 mm

CornerRadius

Kg. / m.

03092 6.6 10 1.2 1.2 -- 0.077

03100 8.4 13 1.2 1.2 -- 0.103

03088 9 12 1.5 1.5 -- 0.121

03082 10.2 12.1 1.6 1.8 -- 0.146

03042 11.5 13 2.5 1.5 0.163

03067 12 9 1.2 1.2 -- 0.089

03112 12 23 2 2 -- 0.292

03029* 12.3 19 3 1.3 2 0.207

03005 13 19.1 1.8 1.8 -- 0.231

03054 14 15 1.5 1.5 -- 0.166

03091 15 10 1.2 1.2 -- 0.105

03105 15 35 2.25 2.25 -- 0.489

03060 16.5 19.5 1.2 1.2 -- 0.171

03052 17 17 1.5 1.5 -- 0.194

03031* 17.5 35 4 3.25 1 0.732

03071 18 40 4 4 -- 0.972

03063 18.8 12.5 1 1 -- 0.113

03062 19 12.5 2 2 -- 0.216

03061 20 12 2 2 -- 0.216

03080 20 20 1.3 1.3 -- 0.201

03001 20 20 2 2 -- 0.302

03007* 20 30.5 3 3.5 1 0.674

03059 21 9.25 1.15 1.15 -- 0.116

03038 23 15 1.2 1.2 -- 0.164

03041 23 21.5 1.5 1.5 -- 0.255

03040 24.8 15 1.4 1.4 -- 0.197

03064 25 12 1.3 1.3 -- 0.163

Profile Reference

A mm

B mm

Th mm

Th1 mm

CornerRadius

Kg. / m.

03094 25 38 2 2 -- 0.524

03051 29 17 1.5 1.5 -- 0.243

03050 29 21 1.5 1.5 -- 0.275

03017* 29.5 52 2 2 2/4 0.688

03057 30 12 1.5 1.5 -- 0.207

03072 30 15 2 2 -- 0.302

03084* 30 18.5 1.8 1.8 1.8 0.304

03027 30 30 2 2 -- 0.464

03047 30 50 10 5 -- 1.890

03009* 32 3.5 1.5 1.2 0.6 0.142

03049 33 21 1.5 1.5 -- 0.292

03053 34 15 1.5 1.5 -- 0.247

03030 34 20 1.5 1.5 -- 0.288

03099 34 75 4 4 -- 1.900

03065 36 12 2 2 -- 0.302

03013 38 25 3 3 -- 0.665

03033 38.3 10.1 2.25 2.25 -- 0.328

03081 40 20 1.1 1.1 -- 0.231

03039 40 20 1.2 1.2 -- 0.251

03019 40 20 1.55 1.55 -- 0.322

03002 40 20 1.8 1.8 -- 0.371

03043 40 20 2.2 2.2 -- 0.449

03104 40 30 6 7.5 -- 1.619

03018 40 40 2.5 2.5 -- 0.776

03103 40 55 6 7.5 -- 2.632

03089* 42.5 33 5 4.2 2 1.212

03076* 44 20 1.5 1.5 1/1.5 0.327

03075* 44 20 2 2 1 0.431

13

CHANNELS SP-E


Profile Reference

A mm

B mm

Th mm

Th1 mm

CornerRadius

Kg. / m.

03073 44 20 2 2 -- 0.432

03016 45 20 1.5 1.25 -- 0.308

03011 45 60 2 2 -- 0.870

03025* 46 10 2.5 2.5 1.5 0.409

03074* 48 90 12 12 1 6.606

03022 50 10.5 1.6 1.25 -- 0.276

03024 50 16.6 1.6 1.6 -- 0.346

03070 50 25 2 2 -- 0.518

03023 50 50 3 3 -- 1.167

03046 55 20 1.8 1.8 -- 0.444

03034* 55 35 5 5 3 1.528

03028 56 20 2.5 2.5 -- 0.614

03079 56 30 2.5 2.5 -- 0.749

03026 58 40 1.5 1.5 -- 0.547

03010* 59 38 3 3 3 1.045

03056 60 12 1.5 1.5 -- 0.328

03045 60 20 4 4 -- 0.994

03093 60 30 3 3 -- 0.923

03117* 65 75 7 7 2 3.784

03014 66 30 3 3 -- 0.975

03036 80 40 2 2 -- 0.842

03090* 81.5 21.4 1.55 2.1 1/2 0.561

03055 94 15 3 3 -- 0.956

03015* 94.25 40 2 2 2 0.923

03035 100 40 1.65 1.65 -- 0.787

03020 100 40 4 4 -- 1.858

03078 100 45 5 5 -- 2.430

03004 101.6 41.45 1.8 1.8 -- 0.880

Profile Reference

A mm

B mm

Th mm

Th1 mm

CornerRadius

Kg. / m.

03003 102 50 3 3 -- 1.588

03021 110 20 2 2 -- 0.789

03077 112 74 4 4 -- 2.722

03032 118 20 4 4 -- 1.620

03012 135 40 8 8 -- 4.300

03066 180 15 2 2 -- 1.112

03044* 200 76 12 12 2 10.631

14

T - SECTIONSSP-F

(*) denotes profile with corner radious / chamfer Check before order confirmation.

Profile Reference A mm B mm Th mm Th1 mm Corner

Radius Kg. / m.

04011 6 9.75 1.75 2 -- 0.072

04012 6 11.5 1.5 2 -- 0.078

04015 18 20 3.5 6 -- 0.437

04002 19 59 1.6 1.6 -- 0.333

04005 20 22 2 2 -- 0.216

04014 20 35 1.3 1.3 -- 0.188

04013 20 35 1.5 1.5 -- 0.217

04016* 20 38 2.5 2 1/2 0.327

04017 20 50 3 3 -- 0.542

04010 22 37 2 1.5 -- 0.261

04003 25 25.2 3 3 -- 0.382

04001* 27 27 1.8 1.8 0.9 0.254

04007 30 15 1.5 1.5 -- 0.176

04004 40 40 2.5 2.5 -- 0.523

04008* 50 50 4 4 3 1.047

04024 50 150 12 12 2/5 6.111

04006 52 40 1.8 1.8 -- 0.438

04018 80 45 5 5 -- 1.620

04009* 100 75 6 6 5 2.805

15

RECTANLGULAR TUBES SP-G



RadiusKg. / m.

05070 20 10 1.2 -- 0.179

05153 20 10 1.5 -- 0.218

05108 20 15 1.2 -- 0.211

05177 24 15 1.5 -- 0.291

05168 25 10 1.8 -- 0.305

05146* 27.5 14 1.8 2 0.359

05203 30 20 3 -- 0.713

05207 40 10 2 -- 0.495

05035 40 20 1.1 -- 0.345

05016 40 20 1.4 -- 0.433

05008 40 20 1.8 -- 0.550

05144* 40 20 2 2 0.596

05112 40 20 2.5 -- 0.743

05100 40 26 3.2 -- 1.030

05111 46 20 2.5 -- 0.824

05064 50 15 1.5 -- 0.502

05157 50 20 3 -- 1.036

05117 50 25 1.1 -- 0.432

05017 50 25 1.4 -- 0.546

05199 50 25 2.5 -- 0.945

05145* 50 30 1.8 1.8 0.735

05189 50.8 25.4 3.25 -- 1.223

05125 54 25 1.5 -- 0.616

05137 55 35 1.7 -- 0.795

05105 55 45.5 3 -- 1.530

05007 60 20 1.5 -- 0.624

05194* 60 25 2 2 0.866

05018 60 30 1.4 -- 0.660


RadiusKg. / m.

05166 60 30 3 -- 1.360

05044 60 40 1.6 -- 0.836

05002 60 40 2 -- 1.037

05099 61 20 5 -- 1.917

05139 64 25 1.7 -- 0.786

05138 64 38 1.7 -- 0.905

05096 69.5 33.5 2.5 -- 1.322

05079 69.5 62.5 2.5 -- 1.715

05118 70 25 1.1 -- 0.551

05019 70 25 1.4 -- 0.698

05003 70 46.5 3 -- 1.790

05061 75 20 1.7 -- 0.841

05060 75 50 1.6 -- 1.052

05127 76 37 1 -- 0.600

05092 80 15 1.1 -- 0.551

05098 80 20 1.1 -- 0.581

05076 80 20 1.35 -- 0.709

05040 80 20 1.6 -- 0.836

05013 80 25 2 -- 1.091

05142 80 40 1 -- 0.637

05121 80 40 1.1 -- 0.700

05091 80 40 1.2 -- 0.762

05041 80 40 1.25 -- 0.793

05124 80 40 1.3 -- 0.824

05014 80 40 1.4 -- 0.886

05054 80 40 1.5 -- 0.948

05059 80 40 2 -- 1.253

05190 80 40 3 -- 1.847

16

RECTANGULAR TUBESSP-G



RadiusKg. / m.

05101 80 40 3.2 -- 1.963

05057 80 50 1.6 -- 1.096

05005 80 50 2 -- 1.361

05211 85 50 2.7 -- 1.882

05130 90 40 2 -- 1.361

05148* 90 53 4 2 2.907

05173 93.2 59 2 -- 1.600

05106 94 55 3 -- 2.315

05140 95 25 1.7 -- 1.070

05104 95.4 55 3 -- 2.338

05086* 98 61 4 1 3.259

05120 100 15 1.15 -- 0.700

05090 100 15 1.2 -- 0.730

05075 100 15 1.35 -- 0.819

05089 100 20 1.2 -- 0.762

05084 100 20 1.3 -- 0.824

05037 100 20 1.445 -- 0.914

05009 100 20 2 -- 1.264

05050 100 30 2.5 -- 1.688

05038 100 40 1.33 -- 0.991

05029 100 40 1.5 -- 1.110

05004 100 40 2 -- 1.469

05135 100 40 3 -- 2.170

05006 100 45 1.8 -- 1.374

05001* 100 45 2.5 1 1.900

05025* 100 45 3.5 1 2.609

05074 100 50 1.6 -- 1.270

05151 100 50 2 -- 1.577


RadiusKg. / m.

05058 100 50 2.5 -- 1.958

05201 100 50 3 -- 2.332

05033* 100 50 3.45 0.75 2.666

05026* 100 60 4 1.25 3.283

05042 100 70 1.65 -- 1.485

05109 100 80 3 -- 2.818

05103* 100 90 3 3/1.5 2.965

05131* 109 53 4 1.5 3.321

05187 110 44 1.8 -- 1.461

05078 110 65 3 -- 2.738

05167 115 90 4 -- 4.254

05045 115 100 3.5 -- 3.931

05185 120 20 1.5 -- 1.110

05165 120 20 3 -- 2.170

05043 120 40 1.7 -- 1.438

05082 120 40 2 -- 1.685

05056 120 50 3 -- 2.657

05205 120 60 3 -- 2.819

05212* 120 60 3 2 2.811

05220 120 80 8 -- 7.949

05162 125 85 2 -- 2.224

05046 140 40 2 -- 1.901

05011 140 50 2 -- 2.010

05115* 142.1 64.3 3 4/1 3.212

05178 146.5 54.5 4 -- 4.169

05067 150 20 2 -- 1.793

05088 150 37.5 2 -- 1.981

05206 150 50 2 -- 2.117

17

RECTANGULAR TUBES SP-G



Radius Kg. / m.

05192 150 50 3 -- 3.143

05071 150 60 6/8 -- 6.933

05087 150 75 3 -- 3.548

05080 150 75 5 -- 5.804

05150 150 100 2.4 -- 3.177

05077 150 100 3 -- 3.953

05184 150.6 67.3 3 -- 3.433

05128* 156.5 52.5 6 1.5 6.378

05095* 183.5 53.5 4.5 1 5.551

05191 195 40 3 -- 3.710

05154 200 50 3 -- 3.952

05155* 200 50 6 6/2 7.637

05110 200 80 3 -- 4.438

05158 200 100 3 -- 4.763

05186 200 100 6.5 -- 10.074

05172 200 150 3 -- 5.572

05156 233 50 3 -- 4.487

05149 250 75 3 -- 5.167

05180 250 100 6 -- 10.951

05171* 250 150 3 1 6.380

05195 300 100 3 -- 6.383

05161* 300 200 4 1 10.627

05179 380 100 6 -- 15.163

18

SQUARE TUBESSP-H



RadiusKg. / m.

05147* 14 14 1.7 1.5 0.221

05051 19.5 19.5 1.7 -- 0.327

05113 20 20 1.25 -- 0.253

05047* 24 24 1.2 1 0.293

05028* 25 25 1.2 1 0.307

05063 25 25 1.5 -- 0.381

05027* 25 25 1.7 1 0.426

05208 25 25 2 -- 0.497

05055 30 30 1.5 -- 0.462

05085 30 30 2 -- 0.605

05159 30 30 3 -- 0.874

05068* 30 30 5 1 1.352

05143 35 35 1.1 -- 0.403

05052 35 35 1.3 -- 0.473

05049 35 35 1.4 -- 0.508

05136 35 35 1.7 -- 0.611

05123 40 40 0.9 -- 0.380

05141 40 40 1 -- 0.421

05122 40 40 1.1 -- 0.462

05039 40 40 1.16 -- 0.486

05034 40 40 1.2 -- 0.503

05015 40 40 1.3 -- 0.543

05020 40 40 1.4 -- 0.584

05012 40 40 1.8 -- 0.743

05097 40 40 3 -- 1.199

05010 44.5 44.5 2.5 -- 1.134

05065 45 45 2 -- 0.929

05119 45 45 3 -- 1.361


RadiusKg. / m.

05073 50 50 1.35 -- 0.709

05188 50 50 2 -- 1.037

05081 50 50 2.2 -- 1.136

05031 50 50 3 -- 1.523

05204 54 54 2.5 -- 1.390

05163 57 57 6 -- 3.305

05102 60 60 3 -- 1.847

05032 60 60 4 -- 2.419

05062 75 75 1.7 -- 1.346

05222 75 75 3.2 -- 2.481

05048 76 76 6 -- 4.535

05072 80 80 1.6 -- 1.355

05030 80 80 2 -- 1.685

05209* 80 80 2.5 2 2.085

05116 80 80 3 -- 2.495

05210* 80 80 4 2 3.276

05069 100 100 2 -- 2.117

05094 100 100 3 -- 3.143

05129 100 100 5 -- 5.130

05107* 102.5 102.5 12.5 1 12.150

05200 150 150 3 -- 4.763

05152* 150 150 6 2/1 9.338

05198 180 180 3 -- 5.735

05224 200 200 4 -- 8.467

19

ROUND TUBES SP-I

Profile Reference A mm B mm Th mm Kg. / m.

06103 8 5.8 1.1 0.064

06083 9.6 6.2 1.7 0.114

06106 10 7.4 1.3 0.096

06045 12 10 1 0.093

06017 12 9 1.5 0.134

06075 13.5 10 1.75 0.174

06008 17 14 1.5 0.200

06019 18.5 15.5 1.5 0.216

06053 19 16.4 1.3 0.195

06054 22 19.4 1.3 0.228

06001 22 19 1.5 0.265

06055 25 22.4 1.3 0.261

06034 25 21 2 0.390

06021 25 17 4 0.713

06078 27 13 7 1.187

06056 28 25.4 1.3 0.294

06082 28.4 24.4 2 0.447

06110 30 27.2 1.4 0.340

06025 30 26.4 1.8 0.431

06059 30 25 2.5 0.583

06088 31.5 7.5 12 1.985

06068 33 28 2.5 0.647

06039 33 27 3 0.763

06012 33.5 25.5 4 1.001

06024 35 31.4 1.8 0.507

06081 35 29 3 0.814

06117 38 34 2 0.611

06035 38.1 31.5 3.3 0.974


06023 40 36.4 1.8 0.583

06007 40 34 3 0.950

06004 40 20 10 2.600

06013 45 40.5 2.25 0.816

06005 48 40 4 1.492

06101 48.5 42.5 3 1.158

06102 48.5 32.9 7.8 2.693

06072 48.6 40 4.3 1.616

06010 50 46 2 0.817

06011 50 45 2.5 1.011

06016 50 44 3 1.196

06014 51 45.5 2.75 1.126

06036 51 38.1 6.45 2.437

06080 51.4 45.4 3 1.231

06020 53.5 49.5 2 0.874

06060 60 56 2 0.984

06006 60 54 3 1.460

06037 60 52.3 3.85 1.834

06079 60 52 4 1.900

06002 60 36 12 4.900

06046 60.32 49.24 5.54 2.574

06061 63 58 2.5 1.283

06062 70 65 2.5 1.431

06026 73.1 60.4 6.35 3.595

06029 75 69 3 1.832

06069 75 65 5 2.969

06015 76 64 6 3.563

06018 77.3 73.3 2 1.287

20

ROUND TUBESSP-I


06066 80 74 3 1.959

06115 80 70 5 3.181

06003 80 64 8 4.900

06042 85.7 73 6.35 4.274

06047 86 73 6.5 4.383

06105 90 86.4 1.8 1.346

06120 92.7 80 6.35 4.651

06032 96 90 3 2.367

06063 98 93 2.5 2.025

06027 100 94 3 2.468

06022 100 90 5 4.029

06093 100 64 18 12.520

06031 101 51 25 16.116

06065 101.6 88 6.8 5.468

06057 102 98.4 1.8 1.530

06064 105 100 2.5 2.174

06070 110 100 5 4.453

06049 111.76 107.44 2.16 2.008

06094 115 110 2.5 2.385

06048 119.4 105 7.2 6.852

06030 120.65 107.95 6.35 6.157

06038 121.4 107.25 7.075 6.861

06052 127 116.84 5.08 5.254

06043 130 120 5 5.301

06050 136.65 127 4.825 5.395

06040 140 116 12 13.029

06051 144.3 136.7 3.8 4.529

06041 145 120 12.5 14.049


06033 158.75 139.7 9.525 12.056

06028 168 160 4 5.564

06085 168.27 154.05 7.11 9.722

06044 200 192 4 6.650

06086 219.08 202.72 8.18 14.631

21

FLAT BARS SP-J


Profile Reference A mm Th mm (R)Corner

Radius Kg. / m.

07044 10 2 -- 0.054

10295 15.8 12.7 -- 0.542

07010 16 3 -- 0.130

07045 20 2 -- 0.108

07020 20 3 -- 0.162

07007 20 5 -- 0.271

07014* 20 5 1 0.268

07023 20 8 -- 0.432

07061 20 10 -- 0.539

07084 25 1.3 -- 0.087

07034 27 4 -- 0.292

07036 30 3 -- 0.243

07015* 30 5 1 0.403

11300 30 20 -- 1.620

07053 31 12 -- 1.004

07012 32 2 -- 0.173

07005 32 5 -- 0.432

07051 34 5 -- 0.458

07048 34 12 -- 1.101

07029 40 2 -- 0.216

07019 40 3 -- 0.324

07002 40 4 -- 0.435

07008 40 6 -- 0.648

07035 40 8 -- 0.864

07032 40 12 -- 1.296

07011 40 20 -- 2.160

07057 45 3 -- 0.364

07058* 45.5 8 2 0.973


Radius Kg. / m.

07013 47.5 2 -- 0.257

07059 50 1.5 -- 0.202

07016* 50 3 1.5 0.400

07001 50 4 -- 0.540

07026 50 6 -- 0.810

07027 50 10 -- 1.350

07083 50 16 -- 2.16

07054 54 8 -- 1.166

07049 57 12 -- 1.846

07050 57 17 -- 2.616

07003 59.8 8 -- 1.296

07030 60 3 -- 0.486

07031 60 5 -- 0.810

07009 60 6 -- 0.972

07021 75 4 -- 0.810

07082 75 20 -- 4.05

07056* 75.5 8 2 1.622

07025 80 8 -- 1.728

07052 80 10 -- 2.159

07046* 82 2 1 0.441

07047* 91 3 1.5 0.734

07071 100 3 -- 0.810

07070 100 6 -- 1.620

07039 100 8 -- 2.159

07004* 100 12 2 3.218

07033 100 20 -- 5.400

07069 110 5 -- 1.485

07060 110 10 -- 2.969

22

FLAT BARSSP-J


Radius Kg. / m.

07062 115 6 -- 1.862

07073 120 10 -- 3.240

07041 130 8 -- 2.807

22750* 135 20 1 7.288

22101 140 15 -- 5.669

07017* 150 6 1 2.428

07018* 150 8 1 3.238

07028* 150 11 1 4.453

07006* 150 12.7 3 5.144

07055* 150 13 1 5.263

07072 170 6 -- 2.753

23311* 170 20 1 9.177

22751* 180 30 1 14.578

07038 200 5 -- 2.700

07040 200 6 -- 3.240

07037* 200 9 1 4.860

07022* 200 15 1 8.098

07024* 200 20 2 10.791

07081* 250 7 1 4.722

07042 300 20 -- 16.200

07043 300 30 -- 24.299


23

I - SECTIONS SP-K


Profile Reference A mm B mm Th mm Th1 mm Corner

Radius Kg. / m.

08006 16 63.5 1.8 1.8 -- 0.446

08004 18 15.7 3 3 -- 0.370

08005* 19 41.25 6.3 3 -- 0.899

08015* 20 34 2 2.5 3 0.420

08007 30 35 2.5 2.5 1 0.607

08003 30 55 2.5 2.5 -- 0.743

08009 48 50 2 2 -- 0.767

08010 60 56 2.5 2.5 -- 1.154

08011* 70.2 30 3 4 3 1.406

08008* 85 180 9 8 5 7.683

08002 100 68 8 10 -- 5.724

08012* 152.4 152.4 6.83 6.1 6.35 8.000

08013* 133.35 203.2 7.82 5.84 8.1 8.744

08020* 200 200 16 12 2 22.714

24

RODS - SQUARE & ROUNDSP-L


Profile Reference A mm (R)Corner

Radius Kg. / m.

10707 9.8 -- 0.259

22603 12 -- 0.388

09692 15 -- 0.608

11613 20 -- 1.080

10018* 20 2 1.071

11552* 25 0.75 1.689

09336* 28.2 3 2.150

10111* 45 2 5.458

22424 50.8 -- 6.967

09442 70 6 13.168

Profile Reference O A mm Kg. / m.

21119 6.5 0.090

11012 8 0.136

21912 10 0.233

21703 12 0.305

11297 20 0.848

21045 30 1.909

24761 45 4.294

21509 50 5.301

24114 60 7.634

24115 80 13.572

24112 90 17.177

21507 105 23.379

24113 110 25.659

All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any

means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.

P.O.Box-5598, Dubai, United Arab Emirates • Tel: +971 4 884 6146 • Fax: +971 4 884 6830 Email: [email protected] • Visit us at www.gulfex.com

Standard Profile - Gulf Extrusions

Documents

Transcript of Standard Profile - Gulf Extrusions