Standard Pipe Supports

1

About UEC Industries Limited

StandardPipe

Supports

We are an engineering company experienced in manufacturing and marketing products and servicesfor U.K. and international projects in the energy and process industries.

Based in the North West of England, we can draw on over 70 years of company experience, in aregion renowned for its technical and engineering expertise.

Our customers are ‘world class’ international companies who demand products of the higheststandards, and our proven ability to meet their changing and developing needs.

We are a quality assessed firm to ISO 9001 (BS5750 Part 1 & 2): Registration No. FM14197. Ourproducts and services contribute to the success of engineering projects throughout the world,including major infrastructure developments.

Services

UEC provide a specialised range of project services to designers and contractors operating in theEnergy and Process Industries. UEC’s expertise in steel fabrication for example is utilised in theprovision of prefabricated structures, pipe systems and ducting to construction sites both in the UKand overseas.

Details of our services are given in a company profile available from our Sales department.

Products

We supply a wide range of mechanical engineering products, manufactured either in-house by UEC orsourced elsewhere according to our customers requirements. In house products include:

PTFE SlidersAnchor Bolts and PlatesVariable and Constant Load Spring HangersBlinds and Spacers for pipelinesInsulated supports for high temperature and cryogenic pipe systemsPipe Support Components

Technical publications describing the products are available from our Sales Department.

Important NoteUEC’s continuous improvement policy means that this catalogue may be updated – check with oursales department. This information is for your guidance: if you require any further assistance, pleasecontact our Sales Department.

We have endeavoured in this catalogue to make the information as accurate as possible, be wecannot accept any responsibility should it be found that any respect the information is inaccurate orincomplete or becomes so as a result of further developments.

2

UEC Standard Pipe SupportsINDEXIntroduction 3 Alloy Clamp (ICR - ½ Mo Steel) 53

Beam Attachment 55/56Pictorial Index Hanger Rods 57Standard Fabricated Supports 5 Elbow Lug 58

Welding Lug 59Pictorial Index Long Welding Lug 60Standard Pipe Supports Components 7 Strap Guide 61

Anchor 61Fabrication Pipe Supports ‘U’ Bolt 62Type FT – “T” Post 9 Forged Clevis 63Type FU – “U” Post 11 Forged Weldless Eye 64Type FG – Goal Post 13 Forged Turnbuckle 65Type FG – Cantilever Bracket 15 Spherical Washer 66Type FA – Angle Bracket 17 Spherical Cup 67Type FL – ‘L’ Bracket 19 Wrapper Plate 68Type FB – Base Support 21 Washer Plate 69Type FTG – Trunnion Guide 23 Base Plate 70Type FUG – Guide 25 Standard Pipe Hanger Assembly 71Type FIG – Guide/Stop 27Type FSW – Welded Pipe Shoe 29 Reference DataType FSC – Clamped Pipe Shoe 31 Index 73Type FTR – Trunnion 33 Pipe Chart – Dimensions & Weights 74Type FVG – Guide Black Bolts & Nuts 75 FVS – Support 35 Economical Insulation Thickness-Type FVB – Bracket 37 Black Washers 76

Mineral Wool 77Field Engineered - Weights of Mineral Wool Insulation 78Small Bore Pipe Supports Thermal Expansion of Pipes (Ferritic 78Introduction 39 Steels)FIELD RUN PIPING Pipe Charts1. Support Spacing 40 -Moment of Inertia2. Hanger Arrangement 42 -Section Modulus3. Pipe Shoe Arrangement 42 -Cross Sectional Area 79/804. Guide/Support Bracket Weight Tables(Single Pipe) Vertical Run 43 Pipe, Butt Weld Fittings and Flanges 81/1025. Suspended Bracket Slip-on/Screwed Flanges, Blind(Multiple Pipes) 44 Flanges and O’Lets 1036. Tee Bracket 45 Valves 104/1087. Pipe to Pipe Brackets 45 Selected Steel Sections 109Continued 46Ordered Field Run Material 47

Standard ComponentsIntroduction/Index 482-Bolt Clamp 493-Bolt Clamp 51

3

IntroductionUEC manufacture a range of fabricated pipe supports and ancillary components for piping systemsused in the energy and process industries.

The brochure provides design guidance, technical details and reference data to enable designers toselect the appropriate equipment for each support application and schedule total requirements fromcollated data.

Section 1:Fabricated Pipe SupportsThis section details standard configurations for steelwork, with relevant design guidance for selection,dimensions, fabrication and installation. The standardisation of fabricated assemblies enablescustomers to specify and schedule supports without engineering drawings. Special supports can beincorporated as required by the engineering design.

Or system offers customers the choice of specifying their own engineered pipe support details orUEC’s schedule. Either way, our unique engineering software will process requirements from a singlecomponent to total project supply of 10,000 supports.

Further details of the UEC system are available on request from our Sales Department.

Section 2:Field Engineered Pipe SupportsThis section provides guidance to field engineers responsible for site-run small bore piping. Detailedrecommendations on how to support piping runs reflect UEC’s 60 years of experience in thefabrication and installation of piping systems. The integrity of small bore systems can be critical toplant operation and safety, therefore the supports must be satisfactorily designed and installed.

Section 3:Field Engineered Pipe SupportsThis section details a rationalised section of components designed to be incorporated in supportassemblies, reflecting current industry practice.

Note: reference should be made to UEC product brochures for PTFE Sliders, spring hangers andinsulated supports when selecting support components.

Section 4:Reference DataThis comprehensive section provides a useful database of information for engineers and draughtsmenengaged on the design and installation of piping systems

4

General Catalogue DetailsMaterials: all items are manufactred from BS EN 10025 Grade FE430A unless otherwise

stated. Cr.Mo., stainless steel and low temperature carbon steel materials areavailable on request.

Finish: supports are supplied self colour or coated to customer’sspecifactions:galvanised, electroplated, plastic coated or painted finishes areavailable.

Dimensions: dimensions are in millimetres unless otherwise stated: sectional steel to anynational standard, or British equivalent can be supplied.

Loads: maximum recommended loads are given in KN unless otherwise stated.

Quality AssuranceManufactre of all UEC prodcts is carried out in accordance with BSEN ISO 9001 specification. UECare a quality assured company registered with the British Standards Institution, and maintain thereqired quality systems.

Pipe Support Data Schedule (PSDS)A sample schedule is shown in Appendix (i);- Page 111. Blank schedules are available free on requestfrom our sales department.

The schedule is designed as a requisition sheet to call up standard pipe support assemblies andcomponents, together with ‘special’ configuartions drawn up on the special pipe support (SPS)drawing format, shown in Appendix (ii):- Page 112. Blank drawing sheets are also available forcustomer use.

The schedule interfaces directly with UEC’s computer software via a unique project item number (PIN)per support assembly. The software generates the information necessary to provide the rapid pricing,manufacturing and delivery systems required for ‘fast track’ industrial projects.

5

Pictorial IndexStandard Fabricated Supports

Type FT – ‘T’ Post Page 9 Type FU – ‘U’ Frame Page 11

Type FG – Goal Post Page 13 Type FC – Cantilever Bracket Page 15

Type FA – Angle Bracket Page 17 Type FL – ‘L’ Bracket Page 19

Type FB – Base Support Page 21 Type FTG – Trunnion Guide Page 23

6

Pictorial IndexStandard Fabricated Supports

Type FUG – Guide Page 25 Type FIG – Base Support Page 27

Type FSW – Welded Pipe Shoe Page 29 Type FSC – Clamped Pipe Shoe Page 31

Type FTR – Trunnion Page 33 Type FVG – Guide Page 35

Type FVS – Support Page 35 Type FVB – Bracket Page 37

7

Pictorial IndexStandard Pipe Support Components

2-Bolt ClampStandard: Type PC1Heavy: Type PC2Page 49

3-Bolt ClampPage 51

Standard: Type PC3Heavy: Type PC4

Alloy ClampPage 53

Standard: Type PC5Heavy: Type PC6

Beam AttachmentType BA1 Page 55

Beam AttachmentType BA2 Page 56

Hanger RodsPage 57

Type HI

Type HT Type HS

Elbow Lug – Type LE Page 58 Welding Lug Type LWPage 59

Long Welding Lug -Type LLW Page 60

8

Pictorial IndexStandard Pipe Support Components

Strap Guide – Type PG1Strap Anchor – Type PA1

Page 61 ‘U’ Bolt – Type PU Page 62

Forged ClevisType RC1 Page 63

Forged TurnbuckleType RC3 Page 65

Forged Weldless EyeType RC2 Page 64

SphericalCup –Type RC5Page 67

Spherical Washer – Type RC4 Page 66 Wrapper Plate –Type PW1 Page 68

Washer Plate –Type PW2 Page 69 Base Plate –Type BP1 Page 71

9

Fabricated Support:Type FT – ‘T’ PostDESIGN GUIDE

Steel SectionMAX CONCENTRIC LOAD (KN)

HEIGHT ‘A’SIZE OF

STEEL SECTION600 800 1200 1500 1800 2000 2200 2400

100 x 100 x 12 L 12 8 6152 x 152 x 23 UC 43 29 22 18 14 12 10 9203 x 203 x 46 UC 115 83 63 51 43 39 35 32

BaseplateSIZE OF

STEEL SECTIONPLATESQ A

PLATETHK B

HOLECTRS C

HOLEDIA D

100 x 100 x 12 L 200 12 140 14152 x 152 x 23 UC 300 15 230 22203 x 203 x 46 UC 400 20 320 27

Anchor BoltsHOLEDIAD

STUDDIAA

STUDLENGTH

B

HOLEDIAC

HOLEDEPTH

D

TORQUEE(Nm)

14 M12 160 14 110 4522 M20 240 24 145 20027 M24 295 32 180 350

10

3 4 No ANCHOR BOLTS2 BASEPLATE1 X X UC L

A B C D EITEM CODE DESCRIPTIONDIMENSION

DRGNo.

FABRICATEDPIPE SUPPORTTYPE FT– ‘T’ POST MARK

No. QTY

11

Fabricated Pipe Support:Type FU – ‘U’ FrameDESIGN GUIDE

Steel SectionSPAN ‘A’ (m)SIZE OF

STEEL SECTION 0.6 0.9 1.2 1.5 1.8 2.0

80 x 80 x 8 L 2.6 2.1 1.6

100 x 100 x 12 L 34 24 16 9.0

152 x 89 CH 52 40 30 24

152 x 152 x 23 UC 80 78 55 43 35 29

MAX VERT LOAD (KN) B � A

Call up standard baseplates BP1 and anchor bolts if bolting frame to concrete (see section 3).

12

1L

X X UCCH


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FU– ‘U’ FRAME MARK

No. QTY

13

Fabricated Pipe Support:Type FU – ‘U’ FrameDESIGN GUIDE

Support can be specified with base plates for fixing to concrete, or without for welding to steel. Sectioncan be RSA or UC.

MAX VERT LOAD (KN) B � ASPAN ‘A’

SIZE OFSTEEL SECTION

0.6 0.9 1.2 1.5 1.8 2.0100 x 100 x 12 RSA 34 24 16

152 x 89 CH 52 40 30 25152 x 152 x 23 UC 80 62 47 39 22 12

Baseplate


PLATESQA

PLATETHK

B

HOLECTRS

C

HOLEDIAD

100 x 100 x 12 L 200 12 140 14152 x 152 x 23 UC 300 15 230 22

Anchor BoltsHOLEDIAD

STUDDIAA

STUDLENGTH

B

HOLEDIAC

HOLEDEPTH

D

TORQUEE(Nm)

14 M12 160 14 110 4522 M20 240 24 145 200

14

3 No. ANCHOR BOLTS2 No. BASEPLATE

1L

X X UCCH


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FG– GOAL POST

MARKNo.

QTY

15

Fabricated Pipe Support:Type FC – Cantilever BracketDESIGN GUIDE

Steel SectionPIPESIZEmm


DIMB

DIMC

HOLEDIAD

MAX LOADKN

50 80 x 80 x 8L 60 71 12 1.180 80 x 80 x 8L 75 103 14 1.1100 100 x 100 x 12 L 90 128 14 2.2150 100 x 100 x 12 L 120 187 18 2.2200 152 x 152 x 23 UC 155 238 18 8.9

A 30 x 30 x 10 shear lug may be welded to the pipe so that bracket acts as a support, rather than aguide.

Refer to standard baseplate drawing if end plate required for bolting to steel/concrete.

16

2 U BOLT TYPE RC 4

1 LX X UC


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FC–CANTILEVERBRACKET

MARKNo. QTY

17

Fabricated Pipe Support:Type FA – Angle BracketDESIGN GUIDE

Steel SectionSIZE OF

STEEL SECTIONDIM

ADIM

BDIMC

MAX LOADKN

50 x 50 x 6L 600 450 315 2.280 x 80 x 8L 900 600 520 3.6

100 x 100 x 12 L 1200 900 750 8.9127 x 64 CH 1200 900 750 17

152 x 152 x 23 UC 1200 900 750 25

Refer to standard baseplate drawing if end plate required for bolting to steel/concrete.

18

1L

X X UCCH


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FA –ANGLE BRACKET MARK

No. QTY

19

Fabricated Pipe Support:Type FL – ‘L’ BracketDESIGN GUIDE

Steel SectionSIZE OF

STEEL SECTIONMAX VERTICAL

LOAD (KN)D

DIA80 x 80 x 8L 1.8 14

100 x 100 x 12 L 5.0 18127 x 64 CH 9.0 22

152 x 152 x 23 UC 11.7 22

Anchor Bolts (if required)DRILLINGD

DIASTUD DIA

ASTUD

LENGTH B D/A C DEPTH DTOURQUE

E(Nm)14 M12 160 14 110 4518 M16 190 18 125 10022 M20 240 24 145 200

20

2 2 No. ANCHOR BOLTS

1L

X X UCCH


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FL–‘L’ BRACKET MARK

No.QTY

21

Fabricated Pipe Support:Type FB – Base Support(150 NB Max)DESIGN GUIDE

Steel SectionHEIGHT ‘A’VERTICAL

MEMBER 300 450 600 75050 x 50 x 6 L 1.4 1.1 0.8 0.780 x 80 x 8 L 2.7 2.0 1.6 1.4

100 x 100 x 12 L 5.5 4.2 3.4 2.9MAX VERT LOAD (KN)

Cross brace can be welded on site to suit vertical or horizontal pipe.

A 30 x 30 x 10 shear lug may be welded to the pipe so that the bracket acts as a support, rather thana guide, for vertical pipes.

22

2 U BOLT TYPE RC41 X X L


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FB–BASE SUPPORT MARK

No.QTY

23

Guides & Stops:Type FTG – Trunnion GuideDESIGN GUIDE

TRUNNIONNB mm

TRUNNIONB’ PLATESQ (Ref)

‘A’ SQPLATE

THK‘B’

GUIDE SECTION WEIGHTKG

40 150 300 12 50 x 50 x 6L x 150 LG 9.850 150 300 12 “ 9.880 150 300 12 “ 9.8100 200 350 12 “ 12.9150 250 400 12 “ 16.4200 300 450 12 “ 20.4250 350 500 12 “ 24.9300 450 650 12 80 x 80 x 8L x 200 LG 53.6350 450 650 15 “ 53.6400 550 750 15 “ 75.0450 550 750 15 “ 75.0500 600 800 15 “ 79.0600 750 900 15 “ 99.0

Anchor Bolts

Use 4-M12 Kemfix Bolts (or equal)M12 Stud Cat No 60-460M12 Capsule Cat No 60-412

24

2 X X L1 BASEPLATE


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FTG–GUIDE MARK

No.QTY

25

Guides & Stops:Type FUG – Uninsulated LinesDESIGN GUIDE

PIPENB mm

HEIGHTA

HEIGHTB

STEELSECTION

MAXLOAD

KN

UNITWEIGHT

KG25 70 - 50 x 50 x 6L 2.2 0.640 80 - “ “ 0.750 100 - “ “ 0.780 100 - “ “ 0.9100 120 - 80 x 80 x 8L 3.3 2.3150 140 - “ “ 2.7200 160 - 100 x 100 x 8L 8.5 3.9250 180 - “ “ 4.4300 200 - 120 x 120 x 8L 9.8 5.9350 - 17 203 x 102 x 25 I 17.8 9.5400 - 24 “ “ “450 - 30 “ “ “500 - 38 “ “ “600 - 52 “ “ “

Height ‘B’ specified for field installation guidance only.

26

2 203 x 102 x 25.33 RSJ1 X X L


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FUG–GUIDE MARK

No. QTY

27

Guides & Stops:Type FUG – Insulated LinesDESIGN GUIDE

PIPENB mm

STEEL SECTIONITEM 1

LENGTHA

MAX LOADKN

WEIGHTKG

25-150 ½ 203 x 102 x 25 I 100 43 2.5200-400 80 x 80 x 8 L 300 48 5.9450-600 80 x 80 x 8 L 450 48 9.0

750 100 x 100 x 12 L 580 87 21900 100 x 100 x 12 L 660 87 241050 100 x 100 x 12 L 740 87 27

28

1 X X LRSJ


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FIG–GUIDE/STOP MARK

No. QTY

29

Fabricated Pipe Support:Type FSW – Welded Pipe ShoeDESIGN GUIDE

PIPENB mm

WIDTHB

UNIT WEIGHT KG(A=300, C=100)

25-150 100 4.7200-300 150 6.8350-400 200 7.8450-600 250 9.2

Standard shoe length ‘A’ = 300 or 450mm.(For line movement M above 175mm. A = 100 + 2M).Shoe length ‘C’ depends on pipe insulation thickness: standard height = 100mm.

30

2 GUIDE 40 x 40 x 6 L1 SHOE


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FUG–GUIDE MARK

No.QTY

31

Fabricated Pipe Support:Type FSC – Clamped Pipe ShoeDESIGN GUIDE

PIPENB mm

WIDTHB

UNIT WEIGHT KG(A = 300, C = 100)

25 100 5.440 100 5.650 100 5.880 100 6.0100 100 7.3150 100 10.5200 150 13.6250 150 19.6300 150 21.0350 200 29.0400 200 35.0450 250 40.0500 250 43.0600 250 59.4

Standard shoe length ‘A’ = 300 or 450mm.(For line movement M above 175mm. A = 100 + 2M).Shoe height ‘C’ depends on pipe insulation thickness: standard height = 100mm

32

2 GUIDE 40 x 40 x 6 L1 SHOE


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FSC–CLAMPED PIPESHOE MARK

No.QTY

33

Fabricated Support:Type FTR – Vertical/Horizontal TrunnionDESIGN GUIDE

Trunnion material, size and schedule is to be specified by the piping stress engineer.

Trunnion length ‘C’ should include site trim allowance.

Base plate/End plate optional: end plates for horizontal trunnions 12mm thick for all sizes.

Base plate holes optional: see table below for anchor bolt sizes.

BASEPLATE ANCHOR BOLTSDRILLINGTrunnion

NB mm (in)ASq

BCtrs

CThk

DDia

ADia

BLgth C Dia D Dpth

Torque‘E’ Nm

40(1 ½”) 150 100 12 14 M12 160 14 110 4550(2”) 150 100 12 14 M12 160 14 110 4580(3”) 150 100 12 14 M12 160 14 110 45100(4”) 200 140 15 18 M16 190 18 125 100150(6”) 250 190 15 18 M16 190 18 125 100200(8”) 300 230 15 24 M20 240 24 145 200250(10”) 350 270 20 27 M24300(12”) 450 350 20 33 M30350(14”) 450 350 20 33 M30400(16”) 550 430 25 39 M36450(18”) 550 430 25 39 M36500(20”) 600 480 25 39 M36

Refer to UEC anchor bolt catalogue for bolts > M20.

34

3 ANCHOR BOLTS (4 No.)2 BASE/END PLATE1 TRUNNION


DRGNo.

FABRICATEDPIPE SUPPORTTYPE FTR– TRUNNION MARK

No.QTY

35

Vessel-Mounted Supports:Type FVG - GuideType FVS – SupportLines 200-600 NBDESIGN GUIDE

The unit can be specified as a guide or support and dimensioned accordingly. When acting as a guide,standard pipe shoes in the required configuration should be specified as shown in the sketch. Thesupport type is used in conjunction with pipe trunnions and requires stiffener plates as shown.

Maximum load (vertical): 54KNMaximum load (horizontal): 15KN

The unit can be specified without the brace as a guide only(max horizontal load 18KN).

OPTIONAL GUIDE CONFIGURATION.

36

1A B C D EITEM CODE DESCRIPTION

DIMENSION

DRGNo.

FABRICATEDPIPE SUPPORTTYPE FVG–GUIDETYPE FVS–SUPPORT

MARKNo. QTY

37

Vessel-Mounted Supports:Type FVB - BracketLines 50-200 NBDESIGN GUIDE

This unit can be specified as a guide or support (shear lug required).

ENDPLATEPIPENBmm

SIZE OF STEELSECTION A B C D

MAXLOAD

KN50 80 x 80 x 8 L 150 12 71 12 1.180 80 x 80 x 8 L 150 12 103 14 1.1100 100 x 100 x 12 L 200 12 128 14 2.2150 100 x 100 x 12 L 250 12 187 18 2.2200 152 x 152 x 23 UC 300 12 238 18 8.9

38

3 ENDPLATE2 ‘U’ BOLT TYPE RC41 x x L

UCA B C D EITEM CODE DESCRIPTION

DIMENSION

DRGNo.

FABRICATEDPIPE SUPPORTTYPE FVB– BRACKET MARK

No.QTY

39

Field EngineeredSmall Bore Pipe Supports

This section gives recommended details to aid field engineers responsible for the design andinstallation of small bore field-run piping (50mm NB and below).

General

1. Position supports and guides in accordance with the recommended spans and overhangs shown intables overleaf.

2. Use standard pipe shoes, ‘U’ Bolts and angle frames as detailed overleaf.3. Hanger type supports should be avoided if possible; where necessary, limit hanger length to

1800mm, and load to 275kg.4. Refer to section 3 for details of standard components, and hanger assemblies where necessary.5. Use the pipe support data schedule (PSDS) to call up the supports required (page 105).6. Use the special support drawing sheet to sketch any special configurations required (page 106).7. Refer to section 4: reference data, for weights of pipe and fittings.

40

Field Run Piping1. Support Spacing

LINE SIZE(mm)

MAX SUPPORTSPACING (m)

VERT. GUIDESPACING (m)

GUIDESPACING (m)

*WEIGHT –Full ofwater (KgM)

20 4.0 6.1 10.7 2.625 4.3 6.1 10.7 3.840 5.2 7.0 10.7 6.650 5.5 7.3 10.7 9.4

*Add 4.5 Kg/M for Insulated Lines.

LINE SIZE(mm)

DIMENSION ‘A’ (in mm) DIMENSION ‘B’ (in m)

20 1.2 1.5 1.8 2.1 2.4 2.8 1.9 1.5 1.4 1.325 1.2 1.5 1.8 2.1 2.4 3.3 2.3 1.8 1.5 1.540 1.5 1.8 2.1 2.4 2.7 3.6 2.7 2.3 2.0 1.850 1.8 2.1 2.4 2.7 3.0 4.3 3.4 2.7 2.4 2.2

COLUMN a b c d e a b c d e

Note: To find permissible overhangs: Match column for Dimension ‘A’ with similar column forDimension ‘B’.

41

Field Run Piping

LINE SIZE(mm)

DIMENSION ‘A’ (in mm) DIMENSION ‘B’ (in m)

20 0.8 0.9 1.1 1.2 1.4 3.5 2.6 2.0 1.4 0.925 0.9 1.1 1.2 1.4 1.5 3.0 2.4 1.8 1.4 0.940 0.9 1.1 1.2 1.4 1.5 4.6 4.0 3.3 2.6 2.150 1.1 1.2 1.4 1.5 1.8 4.6 4.0 3.3 2.7 1.7

COLUMN a b c d e a b c d e

20 0.4 0.7 1.1 1.3 1.8 3.7 2.9 1.5 0.4 0.4 1.6 0.8 1.1 1.8 1.225 0.4 0.9 1.3 1.7 2.1 4.3 2.6 1.7 1.3 1.7 1.7 1.3 1.2 1.1 0.940 0.5 1.1 1.6 2.2 2.7 5.5 3.3 2.2 1.1 2.2 2.2 1.6 1.5 1.6 1.050 0.6 1.2 1.8 2.4 3.0 6.1 3.6 3.7 1.2 1.2 2.4 1.8 0.9 1.5 1.4

COLUMN a b c d e a b c d e a b c d e

LINE SIZE (mm) DIMENSION 'A' (in m) DIMENSION 'B' (in mm) DIMENSION 'C' (in mm)

Note: To find permissible overhangs: Match column for Dimension ‘A’ with similar column forDimension ‘B’ and Dimension ‘C’.

42

Field Run Piping2. Hanger Arrangement

Note: Maximum deflection from vertical 5º (85mm per 1m red).3. Pipe Shoe Arrangement

Note: Use clamp shoe for stainless steel and galvanised lines, shoe length depends on total pipemovement.

43

Field Run Piping4 . Guide/Support Bracket (single pipe)Vertical Run

LINE SIZE(mm)

DIA OFU-BOLT

U-BOLTCENTRES

DIA OFDRILLING

15 6 30 820 6 35 825 6 41 840 10 60 1250 10 71 12

HORIZONTAL RUN ‘A’ mm ANGLE ‘C’ MAX LOADKG

305 50 x 50 x 6 L 110450 50 x 50 x 6 L 55600 50 x 50 x 6 L 36600 80 x 80 x 6 L 135750 80 x 80 x 6 L 115900 80 x 80 x 6 L 901050 80 x 80 x 6 L 801220 80 x 80 x 6 L 68

Note: Maximum load is limit of bracket only. Thecapacity of '‘Existing Steel’ should be reviewed.

44

Field Run Piping5. Suspended Bracket (multiple pipes)

‘A’ mm ‘B’ mm ANGLE ‘C’ MAX LOADKG

305 305 50 x 50 x 6 L 90450 450 50 x 50 x 6 L 7060 60 50 x 50 x 6 L 35600 600 80 x 80 x 6 L 70900 900 80 x 80 x 6 L 45

1200 1200 80 x 80 x 6 L 40



1200 1200 80 x 80 x 6 L 165

45

Field Run Piping6. Tee Bracket



1200 1200 80 x 80 x 6 L 40

7. Pipe to Pipe Brackets

‘A’ mm ANGLE ‘C’ MAX LOADKG

350 50 x 50 x 6 L 35450 50 x 50 x 6 L 30600 50 x 50 x 6 L 25600 80 x 80 x 6 L 55750 80 x 80 x 6 L 45900 80 x 80 x 6 L 401220 80 x 80 x 6 L 35

For U-Bolt see details overleaf.

46

Field Run PipingPipe to Pipe Brackets (cont)


305 50 x 50 x 6 L 55600 50 x 50 x 6 L 25


305 50 x 50 x 6 L 85600 50 x 50 x 6 L 45600 50 x 50 x 6 L 90900 50 x 50 x 6 L 601220 50 x 50 x 6 L 45

47

Field Run Piping

DESIGN DATA FOR U-BOLT ‘J’ AND ‘H’SUPPORTED

LINE SIZEU-BOLT DIA.

(mm)CENTRE TO CENTRE

DRILLING (mm)DIA OF

DRILLING (mm)15 AND 20 6 30/45 8

25 6 41 840 10 60 1250 10 71 12

SUPPORTINGLINE SIZE

U-BOLT DIA(mm)

CENTRE TO CENTREDRILLING (mm)

DIA OFDRILLING (mm)

80 12 103 15100 12 120 15150 16 187 20200 16 238 20250 20 295 25300 20 349 25

8. To order field run material

Use standard fabrication drawings (see Section 1) and complete data tables for issue to fabricationshop.

Alternatively, specify standard components by reference to part codes and sizes detailed in Section 3,and total quantity of rolled steel angle (supplied as 6m random lengths). Angle can be ordered selfcolour, blast primed or coated to customers’ specification.

48

Standard Components

This section contains details of the UEC standard range of Pipe Support Components:

Page49-53 Pipe Clamps

55-56 Beam Attachments

57 Hanger Rods

58 Welding Lugs

61 Strap

62 ‘U’ Bolts

63-65 Forged Clevises, Weldless Eye Nuts & Turnbuckles

66-67 Malleable Iron Spherical Cups & Washers

68 Wrapper Plates

69 Washer Plates

70 Base Plates

71 Standard Hanger Assemblies

Dimensions and weights of each component are tabulated, together with the maximum recommendedloads where applicable. Components can be called up individually or as a complete assembly, usingthe standard assembly drawing and the pipe support data schedule.

Note

Standard components to BS 3974 are also available from UEC, in addition to our standard range.

49

Standard Components

2-Bolt Clamp:Standard: Type PC1Heavy: Type PC2

SPECIFY: Type and Nom. Pipe Size

50

2-Bolt Clamp:

Standard: Type PC1

NOMPIPESIZE

PIPEO/D A B C BOLT

DMATLW x T

MAXLOAD N.

340ºC

WEIGHTKG

15 21.3 32 51 12 M10 25 x 3 2210 0.2120 26.7 32 51 12 M10 25 x 3 2210 0.2225 33.4 38 57 12 M10 25 x 3 2210 0.2340 48.3 51 70 12 M10 30 x 5 3580 0.4850 60.3 57 76 12 M12 30 x 5 4465 0.5780 88.9 76 96 16 M12 30 x 5 4465 0.71

100 114.3 95 114 20 M16 40 x 6 4465 1.38150 168.3 127 152 24 M20 40 x 10 7110 3.06200 219.1 159 184 24 M20 40 x 10 7110 3.64250 273.0 190 222 27 M24 50 x 12 10700 6.57300 323.9 216 248 27 M24 50 x 12 10700 7.33350 355.6 235 273 27 M24 65 x 12 10700 10.1400 406.4 260 298 27 M24 65 x 12 10700 11.0450 457.0 298 343 30 M24 65 x 15 13340 15.4500 508.8 324 375 40 M24 65 x 15 13340 16.9600 610.0 387 438 40 M30 65 x 15 13340 20.7

Heavy: Type PC2

NOMPIPESIZE

PIPEO/D A B C BOLT

DMATLW x T

MAXLOAD N.

340ºC

WEIGHTKG

40 48.3 50 70 16 M12 40 x 6 4900 0.7750 60.3 58 85 16 M12 40 x 6 4900 0.9165 73.0 70 96 20 M16 40 x 6 4900 1.1680 89.9 85 110 20 M20 40 x 6 14719 1.54

100 114.3 96 127 24 M24 50 x 10 15600 3.36150 168.3 135 175 28 M24 65 x 12 21385 6.35200 219.1 160 200 34 M24 65 x 12 21385 7.32250 273.0 200 235 34 M30 65 x 15 26680 11.4300 323.9 235 280 40 M30 80 x 20 38260 20.6350 355.6 255 305 40 M36 90 x 20 40515 25.8400 406.4 280 330 40 M36 90 x 20 10515 28.0450 457.0 305 360 40 M36 90 x 20 40515 30.6500 508.0 330 385 40 M36 90 x 20 40515 32.8600 610.0 395 445 40 M36 90 x 20 40515 37.8

51

3-Bolt Clamp:Standard: Type PC3Heavy: Type PC4

Specify: Type & Nom. Pipe Size

52

3-Bolt Clamp

Standard: Type PC3

SWL (N)NOMPIPESIZE

PIPEO/D 340ºC 400ºC

A B C DSTEELSIZE

FG H WT

KG

40 48.3 6670 6230 102 44 25 M12 30 x 6 124 60 0.8650 60.3 6670 6230 127 54 25 M12 30 x 6 149 70 0.9880 88.9 6670 6230 152 70 25 M12 30 x 6 175 89 1.16100 114.3 11135 9810 165 86 25 M16 50 x 10 194 114 3.48150 168.3 12455 11135 216 121 38 M20 65 x 10 254 155 6.16200 219.1 12455 11135 241 146 38 M20 65 x 10 279 181 6.98250 273.0 14225 12900 279 178 38 M20 65 x 12 317 210 9.42300 323.9 14225 12900 305 203 38 M20 65 x 12 343 235 10.4350 355.6 19130 16920 330 229 51 M24 80 x 15 378 273 17.9400 406.4 19130 16920 356 258 51 M24 80 x 15 403 298 19.3450 457.2 19130 16920 381 285 51 M24 80 x 15 429 324 20.6500 508.0 24475 21775 406 320 51 M24 80 x 20 457 356 29.5600 609.6 26680 23590 457 372 51 M24 100 x 20 514 406 41.5750 762.0 35610 31145 610 470 51 M30 130 x 25 673 508 85.8900 914.4 35610 31145 699 550 51 M30 130 x 25 762 597 99.3

Heavy: Type PC4

SWL (N)NOMPIPESIZE

PIPEO/D 340ºC 400ºC

A B C DSTEELSIZE

FG H WT

KG

150 168.3 35610 31585 229 138 44 M30 100 x 12 279 178 13.5200 219.1 35610 31585 254 168 44 M30 100 x 12 305 216 15.2250 273.0 48950 43605 305 210 51 M36 100 x 20 356 254 28.9300 323.9 48950 43605 330 243 51 M42 100 x 20 381 286 41.4350 355.6 56505 50275 356 256 57 M42 110 x 20 413 305 46.5400 406.4 56505 50275 381 283 57 M42 110 x 20 438 330 49.3450 457.2 56505 50275 406 310 57 M42 110 x 20 464 356 52.0500 508.0 66755 66755 457 348 57 M42 130 x 25 521 394 75.9600 609.6 66755 66755 508 412 57 M42 150 x 30 584 457 113750 762.0 66755 66755 635 495 57 M42 150 x 30 711 546 134900 914.4 66755 66755 711 570 57 M42 150 x 30 787 622 151

53

Standard Components

Alloy Clamp (ICr-½ Mo Steel):Standard: Type PC5Heavy: Type PC6

SPECIFY: Type & Nom. Pipe Size

54

Alloy Clamp (ICr-½ Mo Steel):

Standard: Type PC5

SWL (N)NOMPIPESIZE

PIPEO/D 510ºC 538ºC 566ºC

A B C DSTEELSIZE

FG H WT

KG

40 48.3 6230 4460 3090 102 44 25 M12 30 x 6 124 60 0.8650 60.3 6230 4460 3090 127 54 25 M12 30 x 6 149 70 0.9880 88.9 6230 4460 3090 152 70 25 M12 30 x 6 175 89 1.16

100 114.3 10250 7110 4905 165 86 25 M16 50 x 10 194 114 3.48150 168.3 11575 7995 5785 216 121 38 M20 65 x 10 254 155 6.16200 219.1 11575 7995 5785 241 146 38 M20 65 x 10 279 181 6.98250 273.0 13341 9320 6670 279 178 38 M20 65 x 12 317 210 9.42300 323.9 13341 9320 6670 305 203 38 M20 65 x 12 343 235 10.4350 355.6 17360 12450 8927 330 229 51 M24 80 x 15 378 273 17.9400 406.4 17360 12450 8927 356 258 51 M24 80 x 15 403 298 19.3450 457.2 17360 12450 8927 381 285 51 M24 80 x 15 429 324 20.6500 508.0 22265 14225 11135 406 320 51 M24 80 x 15 457 356 29.5600 609.6 24475 15595 12015 457 372 51 M24 100 x 20 514 406 41.5750 762.0 32030 20450 15595 610 470 51 M30 130 x 25 673 508 85.8900 914.4 32030 20450 15595 699 550 51 M30 130 x 25 762 597 99.3

Heavy: Type PC6

SWL (N)NOMPIPESIZE

PIPEO/D 510ºC 538ºC 566ºC

A B C DSTEELSIZE

FG H WT

KG

150 168.3 32470 23150 16480 229 138 44 M30 100 x 12 279 178 13.5200 219.1 32470 23150 16480 254 168 44 M30 100 x 12 305 216 15.2250 273.0 44485 32030 22265 305 210 51 M36 100 x 20 356 254 28.9300 323.9 44485 32030 22265 330 243 51 M42 100 x 20 381 286 41.4350 355.6 51600 36935 26680 356 256 57 M42 110 x 20 413 305 46.5400 406.4 51600 36935 26680 381 283 57 M42 110 x 20 438 330 49.3450 457.2 51600 36935 26680 406 310 57 M42 110 x 20 464 356 52.0500 508.0 66755 47185 33355 457 348 57 M42 130 x 25 521 394 75.9600 609.6 66755 57880 40025 508 412 57 M42 150 x 30 584 457 113750 762.0 66755 57880 40025 635 495 57 M42 150 x 30 711 546 134900 914.4 66755 57880 40025 711 570 57 M42 150 x 30 787 622 151

55

Standard Components

Beam Attachment: Type BA1

SPECIFY: Rod dia. ‘D’

A B x C D E F PING x N

MINWELDW x L

S/PINSIZE H

MAXLOAD(N)

340ºC

WEIGHTKG

50 50 x 6 M10 30 30 10 X 60 3 x 45 3 x 30 12 3725 0.3765 50 x 6 M10 30 30 10 X 60 3 x 45 3 x 30 14 5940 0.4370 50 x 6 M16 45 30 16 X 60 3 x 45 3 x 30 18 10200 0.5285 80 x 10 M20 55 35 20 X 70 4 x 55 3 x 40 22 15990 1.53120 80 x 10 M24 70 40 24 x 70 4 x 65 3 x 40 26 23150 1.95125 100 x 12 M30 80 50 30 x 100 5 x 90 4 x 50 32 36785 3.51160 130 x 15 M36 100 70 36 x 125 6 x 110 4 x 60 39 53560 7.22180 130 x 15 M42 110 90 42 x 140 8 x 110 4 x 70 45 73375 8.69210 150 x 20 M48 130 90 48 x 160 8 x 140 5 x 70 51 96330 14.7235 180 x 20 M56 145 100 56 x 170 10 x 155 5 x 80 60 133020 17.2255 200 x 20 M64 160 110 64 x 180 12 x 165 5 x 90 68 175600 24.8280 220 x 25 M72 180 120 72 x 200 15 x 170 8 x 100 76 223080 37.1300 250 x 25 M80 200 130 80 x 220 15 x 210 8 x 100 84 280565 46.1335 300 x 30 M90 220 140 90 x 240 15 x 265 10 x 120 94 353160 71.5375 300 x 40 M100 260 150 100 x 280 18 x 275 10 x 120 104 438505 280

56

Beam Attachment: Type BA2

SPECIFY: Rod dia. ‘D’

A B x C D E F HMIN

WELDW x L

MAXLOAD(N)

340ºC

WEIGHTKG

75 50 x 6 M10 30 40 12 3 x 45 3725 0.4675 50 x 6 M12 30 40 14 3 x 45 5490 0.4685 80 x 10 M16 30 60 18 3 x 45 10200 1.5185 80 x 10 M20 30 70 22 4 x 55 15990 1.57

115 100 x 12 M24 40 75 26 4 x 75 23150 2.99120 100 x 15 M30 40 110 32 5 x 90 36785 4.30165 150 x 15 M36 60 120 39 6 x 110 53560 8.22200 150 x 20 M42 70 140 45 8 x 110 73375 13.1210 150 x 25 M48 70 175 51 8 x 140 96330 16.6240 180 x 25 M56 85 185 60 10 x 155 133020 24.2250 180 x 30 M64 85 220 68 12 x 165 175600 31.5260 200 x 30 M72 85 230 76 15 x 170 223080 36.7

57

Standard Components

Hanger Rods-Eye Rod: Type HITie Rod: Type HTAll Thread (Studding): Type HS

SPECIFY: Rod dia., length and thread, i.e. left hand/right hand

RODDIAMETER

MINIMUMTHREAD

LENGTH X

MAXIMUM LOAD(N)

340ºC

WEIGHTKG/M

10 100 3725 0.6212 100 5495 0.8916 100 10200 1.5820 100 15990 2.4724 100 23150 3.8030 125 36785 5.5536 150 53560 7.6642 150 73380 10.8848 200 96335 14.2056 225 133025 19.3064 250 175600 25.2072 215 223080 31.2080 300 280565 38.5090 300 353160 49.90100 300 438505 61.60

58

Elbow Lug: Type LE

SPECIFY: Rod dia. & Elbow size/radius

M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 M80

5.030 9.050 12.100 22.100 27.700 51.700 69.800 92.100 121.000 149.000 185.000 225.000

12 12 12 15 15 20 25 25 25 25 25 3090 90 90 127 127 178 178 216 216 248 248 24838 38 38 50 50 76 76 89 89 95 95 9518 22 28 37 43 52 58 63 68 74 78 93

ELBOW SIZE

C

80 190 297 297 297100 190 294 294 294 343 343150 220 325 325 325 360 360 455 455200 220 330 330 330 360 360 440 440 485 485 510250 215 330 330 330 360 360 430 430 470 470 490300 210 335 335 365 365 430 430 465 465 465350 190 340 370 370 435 435 470 470 490400 185 375 375 435 435 470 470 485450 180 375 375 435 435 465 465 485500 200 405 465 465 500 500 515600 215 497 497 525 525 542 542 542750 210 540 540 555 555 555

RH

A (mm)

ROD SIZEMAX LOAD (KN) 340ºC

TD

59

Standard Components

Welding Lug: Type LW

SPECIFY: Bolt dia. ‘D’

A B x C DBOLT E H

MINWELD

W.

MAXIMUMLOAD

(N)340ºC

WEIGHTKG

55 50 x 6 M10 30 12 3 3725 0.1365 50 x 6 M12 40 14 3 5495 0.1575 50 x 6 M16 50 18 3 10200 0.1890 80 x 10 M20 60 22 5 15990 0.56

115 80 x 10 M24 80 26 5 23150 0.72135 100 x 12 M30 90 32 6 36785 1.27175 130 x 15 M36 110 39 6 53560 2.68200 130 x 15 M42 130 45 8 73375 3.06235 150 x 20 M48 150 51 8 96330 5.53260 180 x 20 M56 170 60 10 133025 7.35295 200 x 20 M64 200 68 10 175600 9.26325 220 x 25 M72 220 76 12 223080 14.0340 250 x 25 M80 240 84 12 280565 16.7385 300 x 30 M90 270 94 12 353160 27.2415 300 x 40 M100 300 104 12 438505 39.1

60

Standard Components

Long Welding Lug: Type LLW

SPECIFY: Bolt dia. ‘D’

A B x C DBOLT E H

MINWELD

W.

MAXIMUMLOAD

(N)340ºC

WEIGHTKG

125 75 x 12 M10 100 12 6 3725 0.88125 75 x 12 M12 100 14 6 5495 0.88125 75 x 12 M16 100 18 6 10200 0.88150 90 x 15 M20 115 22 6 15990 1.59200 100 x 20 M24 115 26 6 23150 3.14200 100 x 20 M30 150 32 6 36785 3.14250 125 x 30 M36 180 39 6 53560 7.5250 125 x 30 M42 180 45 8 73375 7.5300 180 x 35 M48 210 51 8 96330 14.8300 180 x 35 M56 210 60 10 133025 14.8300 250 x 40 M64 190 68 10 175600 23.6

61

Standard Components

Strap Guide: Type PG1Anchor: Type PA1

SPECIFY: Type & Nom. Pipe Size

GUIDE ANCHORNOMINALPIPESIZE

PIPEO/D A B MATL

SIZE C DR1 H1 R2 H2

WEIGHTKG

15 21.3 45 60 40 x 5 12 12 11 11.5 8 0.2520 26.7 45 60 40 x 5 12 15 14 14 11 0.2725 33.4 50 70 40 x 5 12 19 17 18 15 0.3240 48.3 60 80 40 x 8 14 26 25 25 22 0.6250 60.3 70 100 40 x 8 14 32 31 37 28 0.8180 88.9 99 137 50 x 10 18 47 45 46 41 1.69100 114.3 108 146 50 x 10 18 60 58 59 54 1.91150 168.3 155 200 60 x 15 26 87 85 86 81 4.77200 219.1 180 230 60 x 15 26 113 110 112 103 5.76250 273.0 205 250 150 x 15 26 140 137 139 130 16.6300 323.9 230 275 150 x 15 26 165 162 164 155 18.9350 355.6 245 290 150 x 15 26 181 178 180 170 20.3400 406.4 285 330 200 x 20 26 206 204 205 197 41.1450 457.2 310 355 200 x 20 26 232 229 231 220 45.2500 508.0 335 380 200 x 20 26 257 254 256 245 49.2

62

‘U’ Bolt: Type PU

SPECIFY: Nom. Pipe Size

NOMINALPIPESIZE

PIPEO/D C A E D

MAXLOAD

M

WEIGHTKG

15 21.3 30 6 63 63 2160 0.120 33.4 35 6 63 67 2160 0.125 33.4 41 6 63 70 2160 0.140 48.3 70 10 63 78 5350 0.2150 60.3 71 10 63 83 5350 0.2180 88.9 103 12 76 102 9810 0.29

100 114.3 128 12 76 114 9810 0.36150 168.3 187 16 95 156 16040 0.87200 219.1 238 16 95 181 16040 1.15250 273.0 295 20 102 213 24034 2.37300 323.9 349 20 108 244 33400 2.69350 355.6 381 20 108 260 33400 3.15400 406.4 432 20 108 286 33400 3.58450 457.0 486 24 121 321 43630 5.20500 508.0 537 24 121 346 43630 5.68600 609.6 638 24 121 397 43650 6.64

Note: Supplied with 4 nuts – can be used as grip or non-grip type.Add + 3mm to ‘C’ dimension for non-grip type.

63

Standard ComponentsForged Clevis: Type RC1

Specify: ‘D’ Thread

DTHRD A B C E F G H J L

MAXLOAD

(N)340ºC

WTKG

M10 30 38 10 95 32 10 12 38 55 3725 0.92M12 30 38 10 95 32 12 14 38 55 5495 0.97M16 30 38 10 95 32 16 18 38 55 10200 1.06M20 30 63 10 102 32 20 22 50 65 15990 1.61M24 38 76 12 127 32 24 26 58 80 23150 2.72M30 38 76 12 127 32 30 32 58 80 36785 3.06M36 44 89 12 152 41 36 39 80 100 53560 4.87M42 50 102 12 152 44 42 45 90 110 73380 7.3M48 64 127 16 178 57 48 51 102 140 96335 7.5M56 76 152 19 203 70 56 60 127 165 133025 12.2M64 76 152 19 203 70 64 68 127 165 175600 15.7M72 76 152 19 203 70 72 76 127 170 223080 19.8

64

Forged Weldless Eye: Type RC2

Specify: ‘D’ Thread

DTHRD A B

DIAC

DIA E F G

MAXLOAD

(N)340ºC

WEIGHTKG

M10 14 7 32 25 64 16 3725 0.3M12 16 9 38 30 73 18 5495 0.3M16 20 12 38 30 73 18 10200 0.3M20 24 14 45 40 102 25 15990 0.3M24 28 17 50 50 124 28 23150 0.8M30 34 21 70 75 146 38 36785 1.7M36 40 26 70 75 146 38 53560 1.7M42 46 30 80 100 180 45 73375 2.5M48 90 31 100 70 240 75 96335 3.3M56 100 36 100 80 270 80 133025 7.5M64 130 42 130 100 330 80 175600 10.1M72 130 47 130 100 330 80 223080 17.8

65

Standard Components

Forged Turnbuckle: Type RC3

Specify: ‘D’ Dia

DDia

AMIN. B C L

MAX LOADN

340ºC

WEIGHTKG

M10 110 16 32 184 3725 0.19M12 120 24 35 200 5495 0.39M16 130 26 40 203 10200 0.49M20 140 32 50 216 15990 0.82M24 150 35 67 222 23150 1.45M30 170 40 75 232 36785 1.7M36 190 53 90 257 53560 2.5M42 210 62 100 276 73380 4.1M48 240 77 108 305 96335M56 250 83 114 318 133025M64 260 96 145 343 175600

66

Spherical Washer: Type RC4

Material: Malleable Cast Iron BS1452 Grade 10

RODDIA.

AB C D R

UNITWEIGHT

KGM10 12 14 32 13 0.04M12 13 16 35 16 0.07M16 16 19 41 20 0.14M20 19 24 54 25 0.30M24 25 32 67 29 0.47M30 29 35 76 36 0.92

Specify: Rod dia.

67

Standard Components

Spherical Cup: Type RC5(Use with spherical washers RC4)

Material: Maleable cast iron BS 1452 Grade 10SPECIFY: Rod Dia.

RODDIA.

AB C D R

UNITWEIGHT

KGM10 12 14 32 13 0.04M12 13 16 35 14 0.07M16 16 19 41 17 0.14M20 19 24 54 22 0.30M24 25 32 67 29 0.47M30 29 35 76 33 0.92

68

Wrapper Plate: Type PW1

Note: Weld detail to be specified on piping isometric.

SPECIFY: Plate material, thickness & lengthNom. Pipe size & scheduleWeephole (if plate fully welded to pipe)

Full encirclement wrapper plates andCompensation pads designed to ANSI/ASME codesare available to special order.

69

Standard ComponentsWasher Plate: Type PW2

SPECIFY: ‘D’ dia.

B C DDia. F H

MAXLOAD (N)

340ºC

WEIGHTKG

80 6 M10 15 12 3725 0.380 6 M12 18 14 5495 0.380 10 M16 22 18 10200 0.5100 10 M20 26 22 15990 0.8100 12 M24 32 26 23150 0.9100 15 M30 38 32 36785 1.2130 15 M36 48 40 51560 2.0130 20 M42 54 46 73380 2.6130 20 M48 64 52 96335 2.6150 20 M56 70 60 133025 3.5200 30 M64 78 68 175600 9.4200 30 M72 92 76 223080 9.2250 30 M80 110 84 280565 14.7300 40 M90 120 94 353160 28.3300 40 M100 140 104 438505 28.0

70

Base Plate: Type BP1

SPECIFY: Plate SQ ‘A’ & Thickness ‘T’

PLATE SQ‘A’

PLATETHK ‘T’

MATCHINGSECTION

HOLE‘D’

HOLECTRS ‘C’

WEIGHTKG

100 10 50 x 50 x 6L 12 60 0.8150 12 80 x 80 x 8L 14 100 2.1200 10 100 x 100 x 8L 14 140 3.1200 12 100 x 100 x 12L 14 140 3.8250 12 120 x 120 x 10L 14 190 5.9250 15 120 x 120 x 12L 18 190 7.4300 15 150 x 150 x 12L 18 230 10.6300 20 152 x 152 x 23UC 22 230 14.1350 20 152 x 152 x 30UC 27 270 19.2400 20 203 x 203 x 46UC 27 320 25.1450 20 203 x 203 x 52UC 27 350 31.8550 25 305 x 305 x 97UC 39 430 59.4600 25 305 x 305 x 118UC 39 480 70.6

71

Standard Components

Standard Pipe Hanger Assembly:Type HDesign Guide

1. Select the required assembly configuration from the options opposite the code thus:

H D B E

Assembly Type Upperattachment type

Connection Lowerattachment type

2. Specify the rod size, pipe size and pipe clip series, e.g. HDBE – heavy, Rod M20 Pipe 80 NB3. Specify Steel (elevation 1), pipe (elevation 2) and turnbuckle position (elevation 3 if required).4. See UEC catalogue for component details listed below.5. Use the Pipe Support Data Schedule (PSDS) to call up the assembly details required as above.

COMPONENTDESCRIPTION

TYPE REF.PAGE

ATTACHMENT DETAILU = UPPER L = LOWER

Pipe Clamp – 2 bolt PC1/PC2 48 LA, LBPipe Clamp – 3 bolt PC3/PC4 50 LC, LDBeam Attachment BA1 54 UA, UBBeam Attachment 2 BA2 55 UCTie Rod HT 56 UA, UC-UF, LA, LC, LE, LFEye Rod HI 56 UB, LB, LDElbow Lug LE 57 LEWelding Lug LW 58 UELong Welding Lug LLW 59 LFClevis RC1 62 UE, LE, LFWeldless Eye RC2 63 UA, LA, LCTurnbuckle RC3 64 ConnectionWasher Plate PW2 68 UDHexagon Nut - - UA, UC-UF, LA, LC, LE, LF

72

UPPER ATTACHMENTS

LOWER ATTACHMENTS

1 Type H_ _ _ Std Heavy

A ROD B PIPE EL.1 EL.2 EL.3ITEM CODE ASSEMBLY CODEDIMENSION

DRGNo.

STANDARD PIPEHANGER ASSEMBLYTYPE H

MARKNo. QTY

73

Reference Data

Page

74 Pipe Chart – Dimensions and Weights

75 Black Bolts and Nuts to BS 4190 - Dimensions

75 Black Washers to BS 4320 – Dimensions

76 Black Bolts to BS 4190 – Preferred Lengths

77 Economic Insulation Thickness – Mineral Wool

77 Weights of Mineral Wool

78 Support Span for Pipes

78 Thermal Expansion of Pipes – Ferritic Steels

79 – 80 Pipe Charts – Moment of Inertia

- Section Modulus

- Cross Sectional Area

Weight Tables (kg)

81-102 Pipe, Butt Weld Fittings and Flanges

103 Slip-on/Screwed Flanges, Blind Flanges and O’lets

104 – 108 Valves – Gate, Globe, Check, Butterfly, Plug, Ball

109 Selected Steel Sections

110 Appendix (i) Pipe Support Data Schedule (PSDS)

111 Appendix (ii) Special Pipe Support (SPS)

Note : All weights are approximate.

74

Reference Data: Pipe ChartDimensions and Weights of ASA Standard,Seamless and Welded Steel Pipe (mm & kg/m)

Nom Bore ins

O'Side Dia.

55 10S 10 20 30Std Wall

& 40S40 60

Extra Strong &

80S80 100 120 140 160

Dble Extra

Strong0.125 10.3 1.24 1.73 1.73 2.41 2.41

0.28 0.36 0.36 0.46 0.460.25 13.7 1.65 2.24 2.24 3.02 3.02

0.49 0.36 0.63 0.80 0.800.375 17.1 1.65 2.31 2.31 3.20 3.20

0.63 0.85 0.85 1.10 1.100.50 21.3 1.65 2.11 2.77 2.77 3.73 3.73 4.78 7.47

0.80 1.00 1.27 1.27 1.62 1.62 1.94 2.550.75 26.7 1.65 2.11 2.87 2.87 3.91 3.91 5.56 7.82

1.03 1.28 1.68 1.68 2.19 2.19 2.90 3.631.00 33.4 1.65 2.77 3.38 3.38 4.55 4.55 6.35 9.09

1.29 2.08 2.50 2.50 3.23 3.23 4.18 5.451.25 42.2 1.65 2.77 3.56 3.56 4.85 4.85 6.35 9.70

1.65 2.69 3.38 3.38 4.46 4.46 5.68 7.761.50 48.3 1.65 2.77 3.68 3.68 5.08 5.08 7.14 10.16

1.90 3.12 4.05 4.05 5.41 5.41 7.22 9.552.00 60.3 1.65 2.77 3.91 3.91 5.54 5.54 8.74 11.07

2.38 3.94 5.44 5.44 7.49 7.49 11.08 13.452.50 73.0 2.11 3.05 5.16 5.16 7.01 7.01 9.52 14.02

3.70 5.26 8.68 8.68 11.42 11.42 14.88 20.413.00 88.9 2.11 3.05 5.49 5.49 7.62 7.62 11.13 15.24

4.50 6.45 11.29 11.29 15.27 15.27 20.98 27.673.05 101.6 2.11 3.05 5.74 5.74 8.08 8.08

5.20 7.40 13.37 13.37 18.63 18.634 114.3 2.11 3.05 6.02 6.02 8.56 8.56 11.13 13.49 17.12

5.81 8.34 16.07 16.07 22.31 22.31 28.25 33.48 41.025 141.3 2.77 3.40 6.55 6.55 9.52 9.52 12.7 15.88 19.05

9.45 11.56 21.78 21.78 30.95 30.95 40.24 49.11 57.426 168.3 2.77 3.40 7.11 7.11 10.97 10.97 14.27 18.26 21.95

11.31 13.82 28.26 28.26 42.56 42.56 54.20 67.22 79.188 219.1 2.77 3.76 6.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.22

14.78 19.94 33.03 36.72 42.53 42.53 52.88 64.63 64.63 75.80 90.32 101.04 111.32 107.8710 273 3.40 4.19 6.35 7.80 9.27 12.70 12.70 15.09 18.26 21.44 25.40 25.40 28.58 25.40

22.62 27.83 41.70 51.00 60.29 81.46 81.46 95.95 114.59 132.74 154.94 154.94 172.14 154.9412 323.9 3.96 4.57 6.35 8.38 9.52 10.31 14.27 12.70 17.47 21.44 25.40 28.58 33.34 25.40

33.00 36.00 49.81 65.07 73.82 79.67 108.97 97.36 131.70 159.52 186.77 206.96 238.11 186.7714 355.6 3.96 4.78 8.35 7.92 9.52 9.52 11.13 15.09 12.70 19.05 23.82 27.79 31.75 35.71

34.23 41.18 54.63 67.95 81.28 81.28 94.31 126.49 107.28 157.94 194.82 224.42 253.14 281.3816 406.4 4.19 4.78 6.35 7.92 9.52 9.52 12.7 16.64 12.70 21.44 26.19 30.96 36.52 40.49

41.60 47.33 62.58 77.88 93.21 93.21 123.18 159.98 123.18 203.16 245.32 286.44 332.62 364.8518 457.2 4.19 4.78 8.35 7.92 11.13 9.52 14.27 19.05 12.70 23.82 29.36 34.92 39.69 45.24

46.83 53.18 70.53 87.81 122.12 105.14 155.9 205.62 139.07 254.19 309.44 363.19 408.01 459.1820 508 4.78 5.54 6.35 9.52 12.70 9.52 15.09 20.62 12.70 26.19 32.54 38.10 44.45 50.01

59.22 68.50 78.47 117.07 154.97 117.07 183.12 247.79 154.97 310.90 281.04 440.93 507.54 564.1424 609.6 5.54 6.35 6.35 9.52 14.27 9.52 17.48 24.81 12.70 30.96 38.89 46.02 52.39 59.54

82.60 94.37 94.37 140.94 209.54 140.94 254.74 354.64 186.75 441.10 546.92 639.18 718.94 806.6126 660.4 7.92 12.7 9.52 12.70

127.58 202.65 152.87 202.6530 762 7.92 12.7 15.88 9.52 12.70

147.33 234.44 291.81 176.73 234.4432 812.8 7.92 12.7 15.88 9.52 17.48 12.70

156.58 260.33 311.67 186.66 352.28 260.3334 7.92 12.7 15.88 9.52 17.48 12.70

166.82 266.35 331.54 200.59 363.91 266.3535 914.4 7.92 12.7 15.88 9.52 19.05 12.70

177.12 282.12 351.41 212.52 420.17 282.12

75

Reference Data

Black Bolts and Nuts to BS4190

MAX WIDTH OFHEAD AND NUT

MAX HEIGHT OFHEAD

MAX THICKNESSOF NUTNOMINAL

SIZE

PITCH OFTHREAD(COARSE

PITCHSERIES)

ACROSSFLATS

ACROSSCORNER

BLACK FACEDON U’SIDE

BLACK FACEDONE SIDE

TENSILESTRESS

AREAmm²

M12 1.74 1.19 21.9 8.5 8.3 10.55 10 84.3M16 2 24 27.7 10.5 10.3 13.55 13 157M20 2.5 30 34.6 13.9 13.4 16.55 16 353M24 3 36 41.6 15.9 15.4 19.65 19 353M30 3.5 46 53.1 20 19.4 24.65 24 531M36 4 55 63.5 24 23.4 29.65 29 817M42 4.5 65 75.1 27 26.4 34.8 34 1120M48 5 75 86.6 31 30.4 38.8 38 1470M56 5.5 85 98.1 36 35.5 45.8 45 2030M64 6 95 109.7 41 40.5 51.95 51 2680M72 105 117.0 45 58.00M80 115 128.0 50 64.00M90 130 145.0 57 72.00M100 145 162.0 63 80.00

M72 and above are nominal sizes.

Black Washers to BS4320

FLATFORM E FORM F

NOMINALSIZE OF BOLT

OUTSIDE DIA THICKNESS OUTSIDE DIA THICKNESSM12 24.0 2.5 28.0 2.5M16 30.0 3.0 34.0 3.0M20 37.0 3.0 39.0 3.0M24 44.0 3.0 50.0 3.0M30 56.0 4.0 60.0 4.0M36 66.0 5.0 72.0 6.0M42 78.0 7.0M48 92.0 8.0M56 105 9.0

76

Reference Data

Black Bolts to BS4190: Preferred lengths

Hexagon coarse threads: Hexagon round Hexagon

O Preferred bolt length (standard thread length).

X Preferred bolt length (short thread length).

$Non-preferred

BOLT SIZEBOLTLENGTH

(mm) M10 M12 M16 M20 M24 M30 M37

25 O O30 O O X35 O O X40 O O X X45 $ O X X50 O O $X $X55 $ $ OX $X60 O O OX OX65 O O OX O70 O O O OX O75 O O OX OX O80 O O O O O90 O O O O O

100 O O O O O $

110 $ O O O O $ $

120 O O O $ O $ $

130 $ O O O $ $ $

140 O O $ $ O $ $

150 $ O O O $ $ $

160 O O O $ $ $

180 O O O $ $ $

200 O O O O $ $

220 O O $ $ $ $

260 O $ O $ $ $

300 O $ O O $ $

(170, 190, 240 & 280 all non-preferred.)

BOLT LENGTH(mm)

STANDARDTHREAD LENGTH

SHORTTHREAD LENGTH

Up to 125 2 x DIA + 6mm 1½ DIA125-200 2 x DIA + 12mm -Over 200 2 X DIA + 25mm -

77

Reference Data

Economic insulation thickness for mineral wool (mm)

TEMPERATURE OF MEDIUM IN ºCNOMBORE 50 100 150 200 250 300 350 400 450 500 550

25 30 30 40 40 50 50 60 60 70 70 8032 30 40 40 50 50 50 60 60 70 70 8040 30 40 50 50 60 60 70 70 80 80 9050 30 50 50 60 70 70 80 90 100 110 12065 40 50 60 60 70 80 80 90 100 110 12080 40 60 60 70 70 80 80 90 110 120 140100 40 60 60 70 70 80 90 100 110 130 140125 50 60 60 70 80 90 100 110 120 130 150150 50 60 60 80 80 90 100 110 120 150 160200 60 70 70 90 100 110 120 120 140 160 180250 60 70 80 90 100 130 130 140 150 170 190300 60 80 80 100 110 130 140 140 160 180 200350 70 80 80 100 120 130 140 140 160 180 200400 70 80 80 110 120 130 140 150 160 180 200450 70 80 80 120 130 140 150 150 170 190 210500 70 80 80 120 130 140 150 160 170 190 220

Weights of mineral wool insulation with 0.75mm cladding (kg/m)

30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 22025 2.2 2.9 3.6 4.0 6.1 7.232 2.5 3.1 3.9 5.0 6.5 7.640 2.6 3.3 4.1 5.2 6.8 7.8 9.050 2.8 3.5 4.6 5.5 7.1 8.2 9.4 10.6 12.0 13.465 3.3 4.3 5.2 6.2 7.9 9.1 10.4 11.7 13.0 15.080 3.6 4.7 5.7 6.7 8.5 9.7 11.0 12.8 13.8 16.4 18.0 20.0

100 4.4 5.3 6.3 7.4 9.0 10.6 12.0 14.5 16.1 17.7 19.8 22.0125 5.6 6.7 7.8 9.1 10.4 11.8 14.3 15.7 17.5 19.2 21.0 23.0 25.0150 6.4 7.6 8.9 10.2 11.6 14.1 15.7 17.4 19.1 21.0 23.0 25.0 27.0 29.0200 8.1 9.5 12.0 13.7 15.4 17.1 18.9 21.0 23.0 25.0 27.0 30.0 32.0 34.0 36.3 38.6250 10.7 12.3 14.0 15.7 17.7 19.5 22.0 24.0 26.0 28.5 31.0 33.0 35.3 37.6 40.0 40.0 45.2300 12.2 14.1 16.0 17.9 20.0 22.0 25.0 27.0 29.0 31.0 34.0 36.0 39.0 41.6 44.2 44.2 51.0 55.0350 13.8 15.8 17.8 20.0 23.0 25.0 27.0 30.0 32.5 35.0 37.0 40.0 43.0 46.7 49.2 49.2 57.0 60.0400 15.4 17.6 19.8 23.0 25.0 27.0 30.0 32.5 35.0 38.0 41.0 45.0 49.0 52.0 55.0 55.0 61.5 65.0450 17.0 19.4 22.0 25.0 27.0 30.0 32.5 35.0 38.0 43.0 46.0 49.0 52.0 56.0 59.3 59.3 66.0 69.3 72.6500 18.7 22.0 24.0 27.0 30.0 32.0 36.5 41.0 44.0 47.0 50.0 53.0 57.0 58.0 62.3 62.3 71.0 74.7 78.3 82.8

NOM BORE

INSULATION THICKNESS IN mm

Values in table are guidelines which may change due to specific requirements.

78

Reference Data

Support span for pipes in metresInsulated pipeNon-insulated

pipeWaterPipes

SteamPipes

NOMBORE

Water Steam 200ºC 200ºC 250ºC 300ºC 350ºC 400ºC 450ºC 500ºC 550ºC25 2.4 2.6 1.8 1.9 1.8 1.6 1.6 1.5 1.5 1.4 1.332 2.6 2.8 2.1 2.2 2.0 1.9 1.8 1.8 1.7 1.6 1.740 3.1 3.4 2.5 2.6 2.4 2.2 2.1 2.0 1.9 1.8 1.950 3.5 4.0 2.8 3.0 2.8 2.6 2.5 2.5 2.4 2.3 2.265 4.5 5.2 3.8 4.0 3.8 3.7 3.6 3.4 3.3 3.2 3.180 4.8 5.6 4.1 4.3 4.1 4.0 3.9 3.8 3.7 3.6 3.5

100 5.4 6.2 4.6 5.0 4.8 4.6 4.4 4.3 4.2 4.1 4.0125 5.9 6.9 5.1 5.6 5.4 5.2 5.0 4.9 4.8 4.6 4.5150 6.5 7.7 5.5 6.1 5.9 5.7 5.6 5.4 5.3 5.1 5.0200 7.3 8.7 6.6 7.4 7.2 6.9 6.8 6.6 6.5 6.4 6.2250 7.8 9.7 7.4 8.4 8.2 7.8 7.6 7.5 7.4 7.3 7.2300 8.7 10.6 9.1 9.3 9.1 8.8 8.6 8.5 8.3 8.2 8.0350 9.2 11.4 8.6 10.0 9.8 9.4 9.2 9.1 8.9 8.8 8.7400 9.8 12.1 9.3 10.8 10.6 10.2 10.1 9.9 9.7 9.6 9.4450 10.1 13.0 9.8 11.9 11.7 11.1 10.9 10.7 10.5 10.3 10.2500 11.0 14.0 10.6 12.8 12.6 12.0 11.8 11.6 11.4 11.2 11.0

The spans as per table are examples which change according to permissible deflection. Whenestablishing spans factors like gradient, snow and wind loads, vibration and permissible load onsupport points must be taken into consideration.Thermal expansion of pipes (ferritic steels)

TºC mm/m TºC mm/m TºC mm/m TºC mm/m155 1.58 305 3.69 455 5.98160 1.65 310 3.76 460 6.06165 1.71 315 3.84 465 6.13

20 — 170 1.77 320 3.91 470 6.2125 0.05 175 1.84 325 3.99 475 6.2930 0.11 180 1.91 330 4.06 480 6.3635 0.16 185 1.97 335 4.14 485 6.4440 0.21 190 2.04 340 4.21 490 6.5245 0.26 195 2.11 345 4.29 495 6.6050 0.32 200 2.18 350 4.36 500 6.6755 0.37 205 2.25 355 4.44 505 6.7560 0.43 210 2.32 360 4.52 510 6.8365 0.48 215 2.39 365 4.59 515 6.9070 0.54 220 2.46 370 4.67 520 6.9875 0.60 225 2.53 375 4.75 525 7.0580 0.65 230 2.60 380 4.82 530 7.1385 0.71 235 2.67 385 4.90 535 7.2090 0.77 240 2.74 390 4.98 540 7.2895 0.83 245 2.81 395 5.05 545 7.36100 0.89 250 2.88 400 5.13 550 7.43105 0.95 255 2.95 405 5.21 555 7.51110 1.01 260 3.03 410 5.28 560 7.58115 1.07 265 3.10 415 5.36 565 7.66120 1.13 270 3.17 420 5.44 570 7.73125 1.20 275 3.24 425 5.52 575 7.80130 1.26 280 3.32 430 5.59 580 7.88135 1.32 285 3.39 435 5.67 585 7.95140 1.39 290 3.46 440 5.75 590 8.03145 1.45 295 3.54 445 5.82 595 8.10150 1.52 300 3.61 450 5.90 600 8.18

79

Reference DataPipe Chart

MOMENT OF INERTIA (I) cm4

SECTION MODULUS (Z) cm3

CROSS SECTIONAL AREA (A) cm2

10 20 30 STD 40S 40 60 XS 80S 80 100 120 160 XXS2½" I 57 57 73 73 90 112(65mm) Z 16 16 20 20 25 3173.0 O/D A 10 10 13 13 17 233" I 113 113 147 147 193 233(80mm) Z 25 25 33 33 43 52114.3 O/D A 13 13 17 17 24 324" I 269 269 360 360 441 506 589(100mm) Z 47 47 63 63 77 88 103114.3 O/D A 18 18 25 25 32 38 475" I 562 562 772 772 970 1142 1290(125mm) Z 80 80 109 109 137 162 183141.3 O/D A 24 24 35 35 45 56 656" I 1042 1042 1512 1512 1867 2242 2541(150mm) Z 124 124 180 180 222 266 302168.3 O/D A 32 32 48 48 61 76 908" I 2126 2338 2679 2679 3291 3938 3938 4544 5291 6291 6134(200mm) Z 194 213 245 245 300 359 359 415 483 574 560219.1 O/D A 37 41 48 48 60 73 73 85 102 126 12210" I 4176 5058 5926 5926 7852 7852 9115 10694 12173 15130 13872(250mm) Z 306 371 434 434 575 575 668 783 892 1108 1016273 O/D A 47 57 67 67 91 91 108 129 150 195 17512" I 7041 9140 10287 11069 15225 13371 17688 21010 24092 29616 24092(300mm) Z 435 564 635 683 940 826 1092 1297 1488 1829 1488323.9 O/D A 56 73 83 89 126 109 148 180 211 270 21114" I 9361 11540 13707 13707 15835 20844 17858 25547 30823 34905 42260(350mm) Z 526 649 771 771 891 1172 1004 1437 1734 1963 2377355.6 O/D A 61 76 91 91 106 142 120 177 219 253 318

PIPE NBPIPE SCHEDULE

UEC INDUSTRIES LIMITEDπ

I = MOMENT OF INERTIA =64

(D4-d4)

π (D4-d4)Z = SECTION MODULUS =

32 Dπ

A = CROSS-SECTIONAL AREA =4

(D2-d2)

80

Reference DataPipe Chart

MOMENT OF INERTIA (I) cm4

SECTION MODULUS (Z) cm3

CROSS SECTIONAL AREA (A) cm2

10 20 30 STD 40S 40 60 XS 80S 80 100 120 160 XXS16" I 14056 17353 20643 20643 26975 34447 26975 43012 50932 58353 71677(400mm) Z 692 854 1016 1016 1327 1695 1327 2117 2507 2872 3527406.4 O/D A 70 87 104 104 138 179 138 228 276 323 41318" I 20105 24849 34280 29595 43159 56042 38762 68160 81345 93662 114236(450mm) Z 879 1087 1500 1295 1888 2452 1696 2982 3558 4097 4997457.2 O/D A 79 98 137 117 174 231 156 286 348 410 51920" I 27679 40820 53563 40820 62856 83449 53563 102949 123724 140697 173459(500mm) Z 1090 1607 2109 1607 2475 3285 2109 4053 4871 5539 6829508 O/D A 88 131 173 131 205 278 173 349 429 497 63824" I 48093 71121 104437 71121 126161 172203 93581 210726 255693 293278 357596(600mm) Z 1578 2333 3426 2333 4139 5650 3070 6914 8389 9622 11732609.6 O/D A 105 157 234 157 286 398 209 496 615 720 91226" I 75948 119484 90711 119484(650mm) Z 2300 3619 2747 3619660.4 O/D A 142 227 171 22730" I 117163 184795 228537 14056 184795(750mm) Z 3075 4850 5998 3676 4850762 O/D A 164 262 327 197 26232" I 142436 224890 278314 170326 304768 224890(800mm) Z 3505 5534 6848 4191 7499 5534812.8 O/D A 175 280 349 211 383 28034" I 171105 270402 334841 204671 366781 270402(850mm) Z 3963 6262 7755 4740 8494 6262863.6 O/D A 187 298 371 224 408 29836" I 203383 321674 398548 243348 473753 321674(900mm) Z 4448 7036 8717 5323 10362 7036914.4 O/D A 198 315 393 237 470 315

PIPE NBPIPE SCHEDULE

UEC INDUSTRIES LIMITED

Note: Values based on nominal wall thickness less 12½% manufacturing tolerance.

81

Reference Data: Weight Tables (Kg)

Pipe, Butt Weld Fittings and Flanges ½ inch – 15 mm N. Bore

ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

1.27 1.27 1.62 1.62 1.94 2.55

90º LRWE 0.08 0.08 0.10 0.10 0.12 0.16

45º LRWE 0.04 0.04 0.05 0.05 0.06 0.08

180º LRWE 0.16 0.16 0.20 0.20 0.24 0.32

90º SRWE N/A

45º SRWE N/A

180º SRWE N/A

EQUAL TEE 0.16 0.16 0.25 0.25 0.28

CAP 0.03 0.03 0.05 0.05

W/NECK FL. 150lb 0.57 0.57 0.58 0.58 0.60 0.63

" 300lb 0.86 0.86 0.88 0.88 0.90 0.93

" 600lb 0.86 0.86 0.88 0.88 0.90 0.93

" 900lb 1.87 1.87 1.89 1.89 1.91 1.95

" 1500lb 1.87 1.87 1.89 1.89 1.91 1.95

" 2500lb 3.12 3.12 3.14 3.14 3.17 3.21

RED. TEE 15 x 6 0.16 0.16 0.25 0.25

SLIP-ON FL. 150lb 0.4

" 300lb 0.7

" 600lb 0.8

" 900lb 1.7

" 1500lb 1.7

" 2500lb 3.2

O'LET 0.07

BLIND FL. 150lb 0.4

" 300lb 0.9

" 600lb 0.9

" 900lb 1.8

" 1500lb 2.0

" 2500lb 3.2

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)

Note: All Weights are approximate UEC Industries Limited

82


Pipe, Butt Weld Fittings and Flanges ¾ inch – 20 mm N. Bore

ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

1.68 1.68 2.19 2.19 2.90 3.63

90º LRWE 0.08 0.08 0.11 0.11 0.14 0.17

45º LRWE 0.04 0.04 0.06 0.06 0.07 0.09

180º LRWE 0.16 0.16 0.22 0.22 0.28 0.34

90º SRWE N/A

45º SRWE N/A

180º SRWE N/A

EQUAL TEE 0.20 0.20 0.27 0.27 0.29 0.38

CAP 0.06 0.06 0.10 0.10

W/NECK FL. 150lb 0.81 0.81 0.84 0.84 0.88 0.38

" 300lb 1.42 1.42 1.45 1.45 1.49 1.53

" 600lb 1.42 1.42 1.45 1.45 1.49 1.53

" 900lb 2.50 2.50 2.54 2.54 2.59 2.64

" 1500lb 2.50 2.50 2.54 2.54 2.59 2.64

" 2500lb 3.72 3.72 3.78 3.78 3.81 3.87

CON/ECC RED 20 x 15 0.07 0.07 0.10 0.10 0.14 0.14

RED. TEE 20 x 15 0.07 0.07 0.10 0.10 0.14 0.19


" 300lb 1.1

" 600lb 1.4

" 900lb 2.3

" 1500lb 2.3

" 2500lb 3.9

O'LET 0.11

BLIND FL. 150lb 0.7

" 300lb 1.5

" 600lb 1.6

" 900lb 2.4

" 1500lb 2.7

" 2500lb 3.9

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


83


Pipe, Butt Weld Fittings and Flanges 1 inch – 25 mm N. Bore

ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

2.50 2.50 3.23 3.23 4.18 5.45

90º LRWE 0.16 0.16 0.21 0.21 0.27 0.35

45º LRWE 0.08 0.08 0.11 0.11 0.14 0.18

180º LRWE 0.32 0.32 0.42 0.42 0.54 0.70

90º SRWE 0.11 0.11

45º SRWE 0.06 0.06

180º SRWE 0.22 0.22

EQUAL TEE 0.29 0.29 0.35 0.35 0.45 0.58

CAP 0.10 0.10 0.13 0.13 0.15 0.20

W/NECK FL. 150lb 1.16 1.16 1.20 1.20 1.25 1.32

" 300lb 1.76 1.76 1.81 1.81 1.87 1.95

" 600lb 1.77 1.77 1.81 1.81 1.87 1.95

" 900lb 3.69 3.69 3.74 3.74 3.82 3.91

" 1500lb 3.69 3.69 3.74 3.74 3.82 3.91

" 2500lb 5.21 5.21 5.27 5.27 5.36 5.47

CON/ECC RED 25 x 15 0.13 0.13 0.16 0.16 0.21 0.28

" 25 x 20 0.13 0.13 0.16 0.16 0.21 0.28

RED. TEE 25 x 15 0.34 0.34 0.40 0.40 0.44 0.55

" 25 x 20 0.35 0.35 0.40 0.40 0.46 0.57


" 300lb 1.4

" 600lb 1.6

" 900lb 3.4

" 1500lb 3.4

O'LET 0.2

BLIND FL. 150lb 1.0

" 300lb 1.8

" 600lb 2.0

" 900lb 3.6

" 1500lb 5.5

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


84


Pipe, Butt Weld Fittings and Flanges 1½ inch – 40 mm N. Bore

ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

4.05 4.05 5.41 5.41 7.22 9.55

90º LRWE 0.39 0.39 0.52 0.52 0.69 0.91

45º LRWE 0.20 0.20 0.26 0.26 0.35 0.46

180º LRWE 0.78 0.78 1.04 1.04 1.38 1.82

90º SRWE 0.18 0.18 0.34 0.34

45º SRWE 0.09 0.09 0.17 0.17

180º SRWE 0.36 0.36 0.68 0.68

EQUAL TEE 0.77 0.77 0.96 0.96 1.21 1.56

CAP 0.20 0.20 0.23 0.23 0.30 0.36

W/NECK FL. 150lb 1.89 1.89 1.97 1.97 2.01 2.01

" 300lb 3.22 3.22 3.32 3.32 3.44 3.60

" 600lb 3.41 3.41 3.51 3.51 3.64 3.80

" 900lb 5.86 5.86 5.97 5.97 6.12 6.31

" 1500lb 5.86 5.86 5.97 5.97 6.12 6.31

" 2500lb 10.81 10.81 10.96 10.96 11.16 11.42

CON/ECC RED 40 x 15 0.26 0.26 0.35 0.35 0.46 0.61

" 40 x 20 0.26 0.26 0.35 0.35 0.46 0.61

" 40 x 25 0.26 0.26 0.35 0.35 0.46 0.61

RED. TEE 40 x 15 1.35 1.35 1.50 1.50 1.25 1.25

" 40 x 20 0.73 0.73 0.94 0.94 1.50 1.50

40 x 25 0.73 0.73 0.96 0.96 1.25 1.55


" 300lb 2.6

" 600lb 3.1

" 900lb 5.4

O'LET 0.36

BLIND FL. 150lb 1.5

" 300lb 3.2

" 600lb 3.9

" 900lb 5.8

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


85



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

5.44 5.44 7.49 7.49 11.08 13.45

90º LRWE 0.69 0.69 0.95 0.95 1.41 1.71

45º LRWE 0.35 0.35 0.48 0.48 0.71 0.86

180º LRWE 1.38 1.38 1.90 1.90 2.82 3.42

90º SRWE 0.46 0.46 0.63 0.63

45º SRWE 0.23 0.23 0.32 0.32

180º SRWE 0.92 0.92 1.26 1.26

EQUAL TEE 1.88 1.88 1.90 1.90 2.25 2.69

CAP 0.30 0.30 0.30 0.30 0.55 0.59

W/NECK FL. 150lb 2.82 2.82 2.95 2.95 3.18 3.33

" 300lb 3.71 3.71 3.85 3.85 4.11 4.27

" 600lb 4.11 4.11 4.26 4.26 4.52 4.70

" 900lb 10.91 10.91 11.12 11.12 11.49 11.72

" 1500lb 10.91 10.91 11.12 11.12 11.49 11.72

" 2500lb 16.07 16.07 16.33 16.33 16.79 17.09

CON/ECC RED 50 x 20 0.41 0.41 0.57 0.57 0.84 1.03

" 50 x 25 0.41 0.41 0.57 0.57 0.84 1.03

" 50 x 40 0.41 0.41 0.57 0.57 0.84 1.03

RED. TEE 50 x 15 1.29 1.29 2.05 2.05 2.16 2.52

" 50 x 20 1.29 1.29 2.05 2.05 2.16 2.52

50 x 25 1.31 1.31 2.05 2.05 2.19 2.65


" 300lb 3.5

" 600lb 3.7

" 900lb 9.8

O'LET 0.68

BLIND FL. 150lb 2.5

" 300lb 3.6

" 600lb 4.5

" 900lb 10.1

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


86


Pipe, Butt Weld Fittings and Flanges 2½ inch – 65 mm N. Bore

ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

8.68 8.68 11.42 11.42 14.88 20.41

90º LRWE 1.37 1.37 1.81 1.81 2.37 3.24

45º LRWE 0.69 0.69 0.91 0.91 1.19 1.62

180º LRWE 2.74 2.74 3.62 3.62 4.74 6.48

90º SRWE 0.91 0.91 1.21 1.21

45º SRWE 0.46 0.46 0.61 0.61

180º SRWE 1.82 1.82 2.42 2.42

EQUAL TEE 2.69 2.69 3.07 3.07 3.40 4.5

CAP 0.50 0.50 0.50 0.50 0.90 1.00

W/NECK FL. 150lb 4.45 4.45 4.65 4.65 4.89 5.28

" 300lb 5.62 5.62 5.83 5.83 6.01 6.52

" 600lb 6.23 6.23 6.45 6.45 6.72 7.15

" 900lb 15.01 15.01 15.30 15.30 15.66 16.23

" 1500lb 15.01 15.01 15.30 15.30 15.66 16.23

" 2500lb 23.75 23.75 24.15 24.15 24.65 25

CON/ECC RED 65 x 25 0.77 0.77 1.01 1.01 1.33 1.81

" 65 x 40 0.77 0.77 1.01 1.01 1.33 1.81

" 65 x 50 0.77 0.77 1.01 1.01 1.33 1.81

RED. TEE 65 x 25 1.96 1.96 3.37 3.37 3.27 4.27

" 65 x 40 2.08 2.08 3.37 3.37 3.35 4.58

65 x 50 2.08 2.08 3.37 3.37 3.45 4.58


" 300lb 4.4

" 600lb 5.4

" 900lb 13.7

O'LET 1.13

BLIND FL. 150lb 4.1

" 300lb 5.5

" 600lb 6.8

" 900lb 14.0

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


87



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

11.29 11.29 15.27 15.27 20.98 27.67

90º LRWE 2.15 2.15 2.91 2.91 4.07 5.27

45º LRWE 1.08 1.08 1.46 1.46 2.04 2.64

180º LRWE 4.30 4.30 5.82 5.82 8.14 10.54

90º SRWE 1.43 1.43 1.94 1.94 2.51

45º SRWE 0.72 0.72 0.97 0.97

180º SRWE 2.86 2.86 3.88 3.88

EQUAL TEE 3.80 3.80 4.50 4.50 6.20 7.6

CAP 0.70 0.70 0.90 0.90 1.40 1.80

W/NECK FL. 150lb 5.31 5.31 5.59 5.59 6.01 6.45

" 300lb 7.53 7.53 7.85 7.85 8.33 8.83

" 600lb 8.16 8.16 8.49 8.49 8.99 9.51

" 900lb 13.38 13.38 13.78 13.78 14.39 15.04

" 1500lb 19.78 19.78 20.25 20.25 20.96 21.70

" 2500lb 36.00 36.00 37 37 38 39

CON/ECC RED 80 x 40 1.0 1.0 1.36 1.36 1.89 2.47

" 80 x 50 1.0 1.0 1.36 1.36 1.89 2.47

" 80 x 65 1.0 1.0 1.36 1.36 1.89 2.47

RED. TEE 80 x 40 2.88 2.88 4.25 4.25 5.5 7.5

" 80 x 50 2.9 2.9 4.25 4.25 5.5 7.5

80 x 65 3.0 3.0 4.25 4.25 5.6 7.7


" 300lb 6.1

" 600lb 7.3

" 900lb 11.0

O'LET 2.87

BLIND FL. 150lb 5.0

" 300lb 7.3

" 600lb 10.0

" 900lb 13.1

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


88



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

21.78 21.78 31 31 40 49 57

90º LRWE 6.9 6.9 9.80 9.80 12.8 15.6 18.2

45º LRWE 3.46 3.46 4.91 4.91 6.40 7.80 9.12

180º LRWE 13.82 13.82 19.64 19.64 26 31 36

90º SRWE 4.61 4.61 6.55 6.55 8.52

45º SRWE 2.31 2.31 3.28 3.28 4.26

180º SRWE 9.22 9.22 13.1 13.1 17.04

EQUAL TEE 9.90 9.90 13.00 13.00 18.0 23.90 25.0

CAP 2.30 2.30 3.00 3.00 3.9 5.00 5.50

W/NECK FL. 150lb 9.26 9.26 10.07 10.07 10.9 11.69 12.43

" 300lb 16.00 16.00 16.9 16.9 17.82 18.69 19.51

" 600lb 28 28 29 29 31 32 33

" 900lb 36 36 37 37 38 39 41

" 1500lb 56 56 58 58 59 61 62

" 2500lb 92 92 94 94 96 98 100

CON/ECC RED 50 2.8 2.8 3.93 3.93 6.26 7.31

" 65 2.8 2.8 3.93 3.93 6.26 7.31

" 80 2.8 2.8 3.93 3.93 6.26 7.31

" 100 2.8 2.8 3.93 3.93 6.26 7.31

RED. TEE 50 7.81 7.81 12.10 12.10 23.0 22.2

" 65 7.90 7.90 12.10 12.10 23.0 22.2

" 80 7.99 7.99 12.10 12.10 23.0 26.2

" 100 8.22 8.22 12.10 12.10 23.0 26.2


" 300lb 12.5

" 600lb 24.5

O'LET 6.46

BLIND FL. 150lb 9.0

" 300lb 16.4

" 600lb 31

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


89



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

21.78 21.78 31 31 40 49 57

90º LRWE 6.9 6.9 9.80 9.80 12.8 15.6 18.2

45º LRWE 3.46 3.46 4.91 4.91 6.40 7.80 9.12

180º LRWE 13.82 13.82 19.64 19.64 26 31 36

90º SRWE 4.61 4.61 6.55 6.55 8.52

45º SRWE 2.31 2.31 3.28 3.28 4.26

180º SRWE 9.22 9.22 13.1 13.1 17.04

EQUAL TEE 9.90 9.90 13.00 13.00 18.0 23.90 25.0

CAP 2.30 2.30 3.00 3.00 3.9 5.00 5.50

W/NECK FL. 150lb 9.26 9.26 10.07 10.07 10.9 11.69 12.43

" 300lb 16.00 16.00 16.9 16.9 17.82 18.69 19.51

" 600lb 28 28 29 29 31 32 33

" 900lb 36 36 37 37 38 39 41

" 1500lb 56 56 58 58 59 61 62

" 2500lb 92 92 94 94 96 98 100

CON/ECC RED 50 2.8 2.8 3.93 3.93 6.26 7.31

" 65 2.8 2.8 3.93 3.93 6.26 7.31

" 80 2.8 2.8 3.93 3.93 6.26 7.31

" 100 2.8 2.8 3.93 3.93 6.26 7.31

RED. TEE 50 7.81 7.81 12.10 12.10 23.0 22.2

" 65 7.90 7.90 12.10 12.10 23.0 22.2

" 80 7.99 7.99 12.10 12.10 23.0 26.2

" 100 8.22 8.22 12.10 12.10 23.0 26.2


" 300lb 12.5

" 600lb 24.5

O'LET 6.46

BLIND FL. 150lb 9.0

" 300lb 16.4

" 600lb 31

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


90



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

28.00 28.00 43 43 54 67 79

90º LRWE 10.8 10.8 16.20 16.20 20.6 26 30

45º LRWE 5.39 5.39 8.11 8.11 10.33 12.90 15.09

180º LRWE 21.54 21.54 32 32 41 52 60

90º SRWE 8.52 8.52 10.78 10.78 13.73

45º SRWE 4.26 4.26 5.39 5.39 6.87 8.58

180º SRWE 17.04 17.04 21.56 21.56 27 34

EQUAL TEE 16.50 16.50 19.3 19.3 24.0 38.6 39.0

CAP 3.60 3.60 4.0 4.0 6 7.50 8.10

W/NECK FL. 150lb 11.31 11.31 12.58 12.58 13.62 14.80 15.84

" 300lb 20.65 20.65 22.05 22.05 23.2 24.51 26.00

" 600lb 32 33 33 34 36 38

" 900lb 47 47 49 49 51 52 54

" 1500lb 67 67 69 69 71 74 76

" 2500lb 142 142 146 146 149 153 156

CON/ECC RED 65 3.9 3.9 5.95 5.95 9.4 11.1

" 80 3.9 3.9 5.95 5.95 9.4 11.08

" 100 3.9 3.9 5.95 5.95 7.58 9.4 11.08

" 125 3.9 3.9 5.95 5.95 9.4 11.08

RED. TEE 65 16.0 16.0 18.0 18.0 29.0 29.0

" 80 16.0 16.0 18.0 18.0 30.0 29.0

" 100 16.0 16.0 18.0 18.0 29 30.0 29.0

" 125 16.0 16.0 18.0 18.0 30.0 30.0


" 300lb 14.1

" 600lb 29.5

O'LET 13.70

BLIND FL. 150lb 11.8

" 300lb 22.7

" 600lb 38

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


91



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

33 37 43.00 43.00 53 65 65 76 90 101 111 108

90º LRWE 16.9 18.7 21.6 21.6 27 33.00 33.00 39 46 51 57 55

45º LRWE 8.46 9.35 10.81 10.81 13.48 16.42 16.42 19.28 22.97 26 28.00 27

180º LRWE 34 37 43 43 54 66 66 77 92 103 113 110

90º SRWE 11.27 12.45 14.39 14.39 17.96 21.87 21.87 26 31 34

45º SRWE 5.64 6.23 7.20 7.20 8.98 10.94 10.94 12.84 15.30 17.07

180º SRWE 22.54 24.9 29.0 29.0 36 44 44 51 61 68

EQUAL TEE 29 31 33 33 34.5 34.5 34.5 43.6 50.0 54 71 69.0

CAP 4.5 5.0 5.5 5.5 7.0 8.4 8.4 11.0 15.5 18.5 20.0 19.5

W/NECK FL. 150lb 17.89 18.25 18.83 18.83 19.90 21.08 21.08 22.22 23.70 24.76 26.00 25.00

" 300lb 31 31 32 32 33 34 34 35 37 38 39 39

" 600lb 51 51 52 52 53 55 55 56 58 60 61 61

" 900lb 78 79 80 80 82 83 83 85 88 89 91 90

" 1500lb 112 113 114 114 117 119 119 121 125 127 129 128

" 2500lb 209 210 212 212 215 219 219 222 227 230 234 233

CON/ECC RED 100 6.5 6.5 9.86 9.86 13.7 16.9 16.43

" 125 6.5 6.5 9.86 9.86 13.7 16.9 16.43

" 150 6.5 6.5 6.5 9.86 9.86 13.7 16.9 16.43

RED. TEE 100 28.0 28.0 34 34 44 49 51

" 125 28.0 28.0 34.0 34.0 44 52.0 51

" 150 28.0 28.0 34.0 34.0 52 52.0 51


" 300lb 24.8

" 600lb 43

O'LET 14.5


" 300lb 37.00

" 600lb 62.0

" 900lb 86.0

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


92



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

42 51 60 60 81 81 76 115 133 155 172 155

90º LRWE 26 32 38 38 52 52 61 73 84 98 109 98

45º LRWE 13.26 16.20 19.14 19.14 26 26 30 36 42 49 55.00 49

180º LRWE 53 65 77 77 104 104 122 146 169 197 219 197

90º SRWE 17.67 21.59 26 26 35 35 41 49 56 66

45º SRWE 8.84 10.8 12.76 12.76 17.25 17.25 20.31 24.28 28.00 33

180º SRWE 35 43 51.0 51.0 69 69 81 97 113 131

EQUAL TEE 35 37 49 49 59 59 68 74 93 99 120

CAP 7.0 7.6 10 10 13.6 13.6 16.2 21 24 27 30

W/NECK FL. 150lb 23.73 24.67 26 26 28 28 29 31 33 35 37 35

" 300lb 44 44 46 46 48 48 50 52 54 57 59 57

" 600lb 83 85 86 86 89 89 91 94 97 100 103 100

" 900lb 115 116 118 118 122 122 125 128 132 136 139 136

" 1500lb 196 198 200 200 206 206 209 214 219 224 229 224

" 2500lb 403 407 411 411 420 420 426 434 441 451 458 451

CON/ECC RED 100 10.7 10.7 14.5 17.0 23.6 31

" 125 10.7 10.7 14.5 17.0 23.6 31

" 150 10.7 10.7 10.7 10.7 14.5 14.5 17.0 23.6 31

" 200 7.5 9.0 10.7 10.7 14.5 14.5 17.0 20.4 23.6 27.5 31

RED. TEE 100 41 41 52 52 71 85

" 125 41 41 52 53 71 89

" 150 41 41 52 54 82 101

" 200 29 35 41 41 53 58 71 73 89 99 109


" 300lb 37.1

" 600lb 70

O'LET 20.9


" 300lb 54.00

" 600lb 101.0

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


93



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

50 65 74 80 109 97 132 160 187 207 238 187

90º LRWE 38 50 56 61 83 74 101 122 142 159 182 142

45º LRWE 18.94 24.84 28 30 42 37 50 61 71 79 91.0 71

180º LRWE 76 99 112 121 166 149 201 244 285 317 364 285

90º SRWE 25 33 38 41 55 50 67 81 95 106

45º SRWE 12.64 16.57 18.76 20.26 28 24.77 34 41 48 53

180º SRWE 51 66 75 81 111 99 134 163 190 212

EQUAL TEE 59 62 65 71 103 85 115 136 151 177 185

CAP 9 13 15 19 22 22 27.0 33 41 42 45

W/NECK FL. 150lb 37 38 39 40 43 42 46 49 52 55 58 52

" 300lb 62 64 65 66 70 68 73 76 80 83 87 80

" 600lb 99 101 103 104 108 106 112 116 120 124 128 120

" 900lb 152 155 157 158 164 162 169 174 180 184 190 180

" 1500lb 295 299 302 303 311 308 318 326 334 339 348 334

" 2500lb 563 571 575 577 591 586 602 615 627 637 651 627

CON/ECC RED 125 15 16.3 19.8 27 38 49

" 150 15 16.3 19.8 27 38 49

" 200 10.16 13.2 15 16.3 22.2 19.8 27 32 38 42 49

" 250 10.16 13.2 15 16.3 22.2 19.8 27 32 38 42 49

RED. TEE 125 63 64 82 82 103 144

" 150 63 64 82 82 111 144

" 200 41 60 63 64 82 82 82 122 133 144 155

" 250 43 62 63 67 103 85 103 126 149 160 171

SLIP-ON FL. 150lb 28

" 300lb 50

" 600lb 86

O'LET 28

BLIND FL. 150lb 46

" 300lb 81

" 600lb 128

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


94



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

55 68 81 81 94 127 107 158 195 224 253 281

90º LRWE 49 60 72 72 84 113 95 141 173 200 225 250

45º LRWE 24 30 36 36 42 56 48 70 87 100 113 125.0

180º LRWE 97 121 144 144 168 225 191 281 346 399 451 501

90º SRWE 32 40 48 48 56 75 64 94 116 133 150

45º SRWE 16.22 20.14 24.1 24.1 28.00 38 32 47 58 67 75

180º SRWE 65 81 96 96 112 150 127 188 231 267 301

EQUAL TEE 87 91 93 93 114 141 127 165 206 240 275 301

CAP 14 15.5 17 17 23 32 27 35.0 42 47 52 60

W/NECK FL. 150lb 49 50 52 52 54 58 55 62 67 70 74 78

" 300lb 88 90 92 92 93 98 95 103 108 112 116 120

" 600lb 117 119 121 121 124 129 126 134 140 145 150 154

" 900lb 173 176 179 179 182 188 184 195 203 210 215 221

" 1500lb 387 391 395 395 399 408 402 418 429 437 446 454

" 2500lb

CON/ECC RED 150 27 31 36 52 73 86

" 200 23 27 27 31 42 36 52 64 73 78 86

" 250 23 27 27 31 42 36 52 64 73 78 86

" 300 23 27 27 31 42 36 52 64 73 78 86

RED. TEE 150 107 109 122 122 205 270

" 200 90 99 107 109 136 122 122 195 220 250 270

" 250 90 99 107 109 136 127 141 195 230 265 285

" 300 95 103 111 114 141 127 143 206 235 275 300


" 300lb 70

" 600lb 100

O'LET 34

BLIND FL. 150lb 62

" 300lb 110

" 600lb 157

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


95



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

63 78 93 93 123 160 123 203 245 286 333 365

90º LRWE 64 79 95 35 125 162 125 207 249 291 339 371

45º LRWE 32 40 47 47 63 81 63 103 125 146 169 186.0

180º LRWE 127 158 189 189 251 325 251 414 499 582 677 742

90º SRWE 42 53 63 63 83 108 83 138 166 194 225

45º SRWE 21.19 26 32 32 42 54 41 69 83 97 113

180º SRWE 85 105 126 126 167 216 167 275 332 388 451

EQUAL TEE 91 100 115 115 168 208 168 249 306 330 386 426

CAP 18 20 23 23 30 37 30 44.0 54 64 73 79

W/NECK FL. 150lb 60 62 64 64 68 73 68 78 83 89 95 99

" 300lb 110 112 115 115 119 124 119 131 137 143 150 154

" 600lb 163 166 168 168 174 180 174 188 196 203 211 217

" 900lb 210 213 216 216 223 231 223 240 249 258 268 275

" 1500lb 491 496 501 501 510 522 510 535 548 561 575 586

" 2500lb

CON/ECC RED 200 28 33 33 44 57 44 72 83 97 112 121

" 250 28 33 33 44 57 44 72 83 97 112 121

" 300 28 33 33 44 47 44 72 83 97 112 121

" 350 28 28 33 33 44 57 44 72 83 97 112 121

RED. TEE 200 98 107 116 160 161 160 163 210 280 295 295

" 250 98 107 116 160 163 160 163 210 295 310 360

" 300 100 110 119 161 181 167 181 250 310 340 385

" 350 84 100 119 119 167 208 167 200 260 320 360 410


" 300lb 70

" 600lb 100

O'LET 34

BLIND FL. 150lb 62

" 300lb 110

" 600lb 157

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


96



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

71 88 122 105 156 206 139 254 309 363 408 159

90º LRWE 81 100 140 120 178 235 159 279 340 399 449 504

45º LRWE 40 50 70 60 89 118 80 140 170 200 224 252.0

180º LRWE 161 201 280 240 356 470 318 559 680 798 897 1009

90º SRWE 54 67 93 80 119 157 106 194 236 277 311

45º SRWE 27 33 47 40 59 78 53 97 118 138 156

180º SRWE 108 134 186 160 237 313 212 388 472 554 622

EQUAL TEE 95 127 181 135 238 278 190 322 380 451 500 591

CAP 22 25 30.3 29 39 66 32 72.5 75 88 93 104

W/NECK FL. 150lb 68 70 75 73 80 87 77 94 101 109 115 122

" 300lb 133 136 141 139 147 155 144 162 171 180 187 195

" 600lb 197 200 207 204 213 222 210 231 241 251 256 269

" 900lb 283 287 295 291 302 314 298 325 337 350 360 372

" 1500lb 638 644 655 649 666 682 660 698 716 734 749 765

" 2500lb

CON/ECC RED 200 39

" 250 33 48 40 59 79 53 97 116 136 145 159

" 300 33 48 40 59 79 53 97 116 136 145 159

" 350 34 33 48 40 59 79 53 97 116 136 145 159

" 400 34 33 48 40 59 79 53 97 116 136 145 159

RED. TEE 200 123 140 129 150 188 154 205 310 360 360 455

" 250 123 140 129 150 188 164 225 325 385 385 475

" 300 127 154 135 194 212 164 234 325 410 410 500

" 350 105 127 164 135 194 212 190 258 370 420 455 520

" 400 105 127 164 135 238 257 190 279 380 440 475 550


" 300lb 123

O'LET 59

BLIND FL. 150lb 97

" 300lb 178

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


97



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

78 117 155 117 183 248 155 311 381 141 508 564

90º LRWE 100 149 197 149 233 315 197 395 484 561 645 717

45º LRWE 50 74 98 74 116 157 98 198 242 280 323 359.0

180º LRWE 199 297 394 297 466 629 394 790 969 1121 1290 1434

90º SRWE 67 99 131 99 155 210 121 263 323 374 430

45º SRWE 33 50 66 50 78 105 61 132 161 187 215

180º SRWE 133 198 263 198 311 420 243 527 646 747 860

EQUAL TEE 121 169 265 169 321 379 246 459 540 590 721 791

CAP 31 36 49.0 36 66.7 94.5 49 60.8 100 105 153 170

W/NECK FL. 150lb 135 140 144 140 147 154 144 162 170 176 184 190

" 300lb 162 168 174 168 179 189 174 199 211 221 231 241

" 600lb 247 254 261 254 267 279 261 291 305 316 329 339

" 900lb 351 361 370 361 377 393 370 409 426 441 458 472

" 1500lb 781 795 808 795 818 841 808 864 889 910 934 954

" 2500lb

CON/ECC RED 300 58 79 59 93 126 79 158 163 178 305 340

" 350 50 58 79 59 93 126 79 158 163 178 305 340

" 450 50 58 79 59 93 126 79 158 163 178 305 340

RED. TEE 200 164 214 163 220 224 214 228 390 430 450 660

" 250 164 214 163 220 286 214 293 420 475 500 680

" 300 164 214 163 224 293 214 324 450 500 540 700

" 350 110 164 214 163 224 293 214 324 470 530 590 725

" 400 112 168 218 168 230 324 218 355 470 550 630 750

" 450 112 168 218 168 265 351 218 410 540 570 680 770


" 300lb 133

O'LET 85

BLIND FL. 150lb 125

" 300lb 225

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


98



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

94 141 210 141 255 355 187 441 547 639 719 807

90º LRWE 144 215 319 215 389 541 285 673 834 974 1096 1230

45º LRWE 72 107 160 107 194 270 142 337 417 487 548 615.0

180º LRWE 288 429 638 429 778 1082 570 1346 1668 1949 2194 2461

90º SRWE 96 143 213 143 259 361 190 449 556 650 732

45º SRWE 48 72 106 72 130 180 95 225 278 325 366

180º SRWE 192 286 426 286 519 722 380 898 1113 1300 1463

EQUAL TEE 170 240 444 240 571 656 350 749 911 1102 1184 1319

CAP 44 52 74.5 52 93 120.0 69 150.0 150 200 250 285

W/NECK FL. 150lb 116 123 133 123 140 156 130 169 185 199 211 225

" 300lb 235 243 255 243 262 279 251 294 311 327 341 355

" 600lb 347 356 370 356 379 400 365 417 439 457 474 492

" 900lb 652 666 686 666 699 728 679 753 784 811 835 860

" 1500lb 1247 1266 1294 1266 1312 1353 1285 1388 1431 1469 1501 1537

" 2500lb

CON/ECC RED 300 63 72 107 72 129 180 95 228 241 295 540 610

" 350 63 72 107 72 129 180 95 228 241 295 540 610

" 450 63 72 107 72 129 180 95 228 241 295 540 610

RED. TEE 200 204 320 204 308 389 300 452 635 920 950 1040

" 250 218 320 218 308 389 300 452 770 950 980 1090

" 300 150 222 320 222 309 427 300 490 770 1001 1049 1140

" 350 150 222 340 222 309 472 320 490 815 1010 1040 1180

" 400 151 227 340 227 390 4723 320 533 815 1040 1090 1210

" 450 151 227 373 227 390 545 350 606 910 1060 1140 1270


" 300lb 208

O'LET 146

BLIND FL. 150lb 192

" 300lb 345

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


99


Pipe, Butt Weld Fittings and Flanges 30 inch – 750mm N. Bore

ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

147 234 292 177 235

90º LRWE 281 447 556 336 447

45º LRWE 140 223 278 168 223

180º LRWE 561 894 1113 673 894

90º SRWE N/A

45º SRWE N/A

180º SRWE N/A

EQUAL TEE 484 389 484

CAP 51 80 106.0 57 80

W/NECK FL. 150lb 163 175 182 167 175

" 300lb 371 327 402 378 390

" 600lb 516 538 552 523 538

" 900lb

" 1500lb

" 2500lb

CON/ECC RED 500 165 100 143

" 600 165 100 143

" 650 100 143

" 700 100 143

RED. TEE 250 296 377

300 304 385

350 312 395

400 321 405

450 330 417

500 340 429

550 351 441

600 361 452

650 372 463

700 380 475

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


100



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

157 260 312 189 357 260

90º LRWE 319 509 634 383 696 509

45º LRWE 160 254 317 192 348 254

180º LRWE 639 1018 1268 766 1393 1018

90º SRWE N/A

45º SRWE N/A

180º SRWE N/A

EQUAL TEE

CAP 68 91 118.0 70 132 91

W/NECK FL. 150lb 198 210 219 202 223 210

" 300lb 426 447 461 433 468 447

" 600lb 577 602 618 586 626 602

" 900lb

" 1500lb

" 2500lb

CON/ECC RED 600 110 150

" 650 110 150

" 700 110 150

" 750 110 150

RED. TEE 350 415 523

400 425 535

450 436 547

500 448 562

550 460 577

600 472 591

650 482 605

700 493 616

750 506 628

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


101



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

157 266 312 201 364 266

90º LRWE 361 575 634 433 787 575

45º LRWE 180 288 317 216 394 288

180º LRWE 721 1150 1268 865 1574 1150

90º SRWE N/A

45º SRWE N/A

180º SRWE N/A

EQUAL TEE 645 517 645

CAP 58 96 118.0 73 154 96

W/NECK FL. 150lb 212 226 219 217 239 226

" 300lb 477 500 461 485 523 500

" 600lb 631 658 618 640 685 658

" 900lb

" 1500lb

" 2500lb

CON/ECC RED 600 123 162

" 700 123 162

" 750 123 162

" 800 123 162

RED. TEE 400 415 523

450 425 535

500 436 547

550 448 562

600 460 577

650 472 591

700 482 605

750 493 616

800 506 628

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


102



ALL 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

177 282 351 213 420 282

90º LRWE 405 646 804 486 962 646

45º LRWE 202 323 402 243 481 323

180º LRWE 810 1291 1609 971 1923 1291

90º SRWE 270 431 536 324 641 431

45º SRWE 135 215 268 162 321 215

180º SRWE 540 861 1073 648 1283 9261

EQUAL TEE 733 588 733

CAP 82 107 143 80 172 107

W/NECK FL. 150lb 238 252 262 243 271 252

" 300lb 530 556 573 539 590 556

" 600lb 631 658 676 640 685 658

" 900lb

" 1500lb

" 2500lb

CON/ECC RED 600 145 160

700 150 160

750 154 165

800 15 165

850 154 165

RED. TEE 400 472 602

450 483 611

500 493 621

550 502 622

600 513 643

650 526 654

700 537 670

750 548 685

800 561 700

850 574 715

PIPE SCHEDULE

MIS

C F

ITT

ING

SW

EL

D N

EC

K F

LA

NG

ES

BU

TT

WE

LD

FIT

TIN

GS

DESCRIPTION

PIPE (kg/m)


103


Slip-on/Screwed Flanges, Blind Flanges and O’lets

150lb 300lb 600lb 900lb 1500lb 2500lb 150lb 300lb 600lb 900lb 1500lb 2500lb15 0.40 0.70 0.80 1.7 1.7 3.2 0.4 0.91 0.91 1.8 2.0 3.2 0.0720 0.70 1.1 1.4 2.3 3.9 0.75 1.5 1.6 1.6 2.4 2.7 3.9 0.1125 0.80 1.4 1.6 3.4 3.4 5.4 1 1.8 2 3.6 3.9 5.3 0.1840 1.4 2.6 3.1 5.4 5.4 10.7 1.5 3.2 3.9 5.8 6.4 11.4 0.3650 2.2 3.5 3.7 9.8 9.8 16.1 2.5 3.6 4.5 10.1 11.4 16.4 0.6865 3.6 4.4 5.4 13.7 13.7 23 4.1 5.5 6.8 14 15 24 1.1380 4.1 6.1 7.3 11 19 35 5 7.3 10 13.1 21 36 2.87

100 5.6 10.1 15.8 19.8 29.5 52 7.1 12.3 18.6 23.6 31 56 4.76125 6.3 12.5 24.5 32 54.5 87 9 16.4 31 38.6 60 94 6.46150 7.5 14.1 29.5 41.2 63.6 132 11.8 22.7 38 50 73 146 13.7200 12.6 24.8 43 71 107 194 20.4 37 62 86.4 125 220 14.5250 18.5 37.1 70 100 181 366 31.8 54 101 127 215 421 20.9300 28 50 86 133 273 519 46 81 128 179 325 605 27.7350 36 70 100 152 62 110 157 214 34400 46 97 142 184 80 142 223 269 52.2450 50 123 175 258 97 178 282 382 59500 64 133 221 317 125 225 369 484 84.8600 89 208 315 608 192 345 541 907 146750 140 362 533 450 705 1115800 168 398 624 560 820 1315850 179 480 681 630 950 1495900 205 540 726 765 765 1750

PIPE NB mm

WELD O'LET

SLIP-ON/SCREWED FLANGE BLIND FLANGE


104


Gate Valves

FLANGED BUTT WELD (SOCKET WELD 40 NB & BELOW)Nom.Boremm

150 300 600 800/900 1500 150 300 600 800/900 1500 250015 2.7 3.2 3.5 6.5 2.0 9.0 9.520 3.4 4.5 5.0 9.6 2.3 9.0 9.525 4.2 5.4 6.0 14.3 3.6 18 2140 8.4 11.1 17.5 24.2 7.3 18 3250 13.2 15.3 21.8 41 16 18 18 20 24 3465 31 45 55 25 36 5080 33 54 79 120 173 32 36 36 45 55 73

100 48 84 126 185 288 46 57 57 80 105 118125 95 95 130 160 262150 87 163 260 362 692 90 127 145 205 255 375200 136 210 440 178 180 295 370 470 573250 232 408 693 208 352 477 580 820 995300 305 514 898 272 430 660 860 1205 1580350 373 792 780 1070 1390 1990400 528 1003 1140 1480 1910 2730450 654 1211 1820 1930 2500 3370500 822 2280 2410 3120 3870600 1169 2820 3370 4370 5000


105


Globe Valves

FLANGED BUTT WELD(SOCKET WELD 80 NB & BELOW)

NomBoremm 150 300 600 800/900 1500 2500 600 800/900 1500 250015 3.0 3.5 4.4 6.7 2.4 4.0 5.520 5.1 6.0 5.7 9.7 3.8 6.4 7.925 5.4 8.3 8.7 14.5 6.1 8.5 12.840 10.2 15.6 16.5 24.6 12.5 22 2250 15.8 21.5 23.6 42 16 20 28 3965 23 37 5780 38 57 76 154 28 41 50 95100 52 97 128 240 48 64 100 120125 109 120 185150 116 179 367 568 137 178 245 370200 205 285 310 500 805250 535 785 1040300 1370


106


Check Valves (Flanged), Butterfly Valves

CHECK (FLANGED) BUTTERFLYNom.Boremm 150 300 600 900 1500 WAFER LUG

15 2.0 3.4 4.0 6.020 3.1 5.2 5.2 8.725 4.5 7.5 7.9 12.740 8.4 14 15.1 21.5 2.2 2.550 16 24 31 31 61 2.5 3.565 26 3.0 4.580 31 44 62 83 125 3.5 5

100 55 71 107 211 212 5 7.5125 7 11150 81 114 215 395 582 8.5 13200 150 197 385 10 18.5250 229 331 613 21 28.5300 333 464 31 43.5350 453 654 50 60400 628 882 72 92450 766 92 108500 111 150600 213 272

Note: All Weights are approximate UEC Industries Limited15 – 40 mm incl. forged steel, above 40mm: cast steel.

107


Plug Valves

PRESSURE BALANCED - FLANGEDNom.Boremm 150 300 600 800/900 1500 2500

STANDARD &INVERTEDTAPER -

FLANGED

15 5.3 4.5 13 320 9.0 8.5 18 4.525 10 13.5 22 5.440 16 22 16 63 1050 19 21 25 68 74 1480 33 38 46 114 118 155 27

100 52 60 85 125 161 230 51150 80 178 254 264 257 100200 158 276 406 591 521 182250 245 356 584 662 406300 350 508 620 546350 670 796 864 564400 785 902 1168 682450 885 1097 1653 1078500 966 1576 1850600 1856 2060 2161 1325


108


Ball Valves (Flanged Ends, excluding Gearing)

SIDE ENTRY TOP ENTRYNom.Boremm 150 300 600 900 1500 2500 600 900 1500 2500

50 30 34 35 50 60 100 60 70 85 11980x50 30 37 50 60 90 150 70 81 95 148

80 61 65 80 90 122 250 100 120 140 305100x800 67 71 100 98 155 330 125 144 160 360

100 100 123 147 170 200 370 155 185 240 450150x100 110 140 180 240 310 600 180 200 300 585

150 180 170 250 350 460 850 240 370 550 1020200x150 205 225 280 380 620 1100 295 400 630 1350

200 260 330 480 520 680 1800 458 650 900 2200250x200 350 380 530 690 880 2200 530 710 1000 2900

250 380 430 660 940 1200 2700 880 1100 1470 3250300x250 500 550 860 950 1150 3800 940 1180 1350 4100

300 570 750 915 1200 1260 4300 1210 1550 1980 5200350x300 620 850 980 1300 1950 1280 1650 2100

350 750 880 1100 1500 2700 1520 1900 2730400x350 740 920 1260 1700 2600 1700 1750 2680

400 920 1300 1520 2100 3500 1800 3000 4100450 1250 1600 2000 2720 5500 2050 3900 6000 14200

500x400 980 1650 1950 2400 4900 1960 3900 5900500 1900 2300 2850 3400 7500 3000 5000 7950

600x500 1980 2500 3200 4200 9200 3300 6500 9300600 2600 3760 4600 5500 12300 5000 8100 13800650 3150 3900 5300 7300 5400 9200700 3600 4200 6100 8500 6000 10500

750x600 2750 3980 5200 6900 5500 9400750 4800 5810 8500 9700 9000 12500

900x750 5700 7000 8900 11200 9900 13800900 7500 8300 10600 14500 11500 20000

1000x900 8500 9500 11500 122001000 10500 11200 13000 150001100 12500 13000 16500 190001200 18500 19200 20050 22000


109


Selected Steel Sections

Round Bar Equal Angle Channel

DIA. WEIGHTKg/m SIZE WEIGHT

Kg/m SIZE WEIGHTKg/m

M10 0.62 40x40x6 3.52 76x38 7.46M12 0.89 50x50x6 4.47 76x51 9.45M16 1.58 70x70x8 8.36 102x51 10.42M20 2.47 80x80x8 9.63 127x64 14.90M24 3.80 80x80x10 11.90 152x76 17.88M30 5.85 100x100x10 15.0 152x89 23.84M36 7.66 100x100x12 17.8 178x76 20.84M42 10.88 120x120x8 14.7 178x89 26.81M48 14.2 120x120x10 18.2 203x76 23.82M56 19.3 120x120x12 21.6 203x89 29.78M64 25.2 150x150x12 27.3 254x89 35.74M72 31.2 200x200x12 36.74 305x102 46.18

Column U.Beam Joist

SIZE WEIGHTKg/m

SIZE WEIGHTKg/m

SIZE WEIGHTKg/m

152x152 23 203x133 25 102x44 7.44152x152 30 203x133 30 102x102 23.06152x152 37 254x102 22 127x76 13.36203x203 46 254x102 25 127x114 29.76203x203 52 254x146 31 152x76 17.86203x203 60 254x146 37 152x89 19.09254x254 73 305x102 25 178x102 21.54254x254 89 305x102 28 203x102 25.33254x254 107 305x127 37 203x152 52.03305x305 97 305x127 42 254x114 37.2305x305 118 305x16 40 254x203 81.84305x305 137 305x165 46 305x203 96.72

Plate: 7.85 kg/m2 per mm thickness UEC Industries Ltd

Note: All weights are approximate.

Standard Pipe Supports

Documents

Transcript of Standard Pipe Supports