Standard Pipe Supports

1

Standard Pipe Supports

About Maineport Ltd We are an engineering company experienced in manufacturing and marketing products and services for U.K. and international projects in the energy and process industries. Our customers are ‘world class’ international companies who demand products of the highest standards, and our proven ability to meet their changing and developing needs. We are a quality-assessed firm to ISO 9001:2000: Registration No. FM14197. Our products and services contribute to the success of engineering projects throughout the world, including major infrastructure developments.

Products We supply a wide range of mechanical engineering products, manufactured either in-house by Maineport Ltd or sourced elsewhere according to our customer’s requirements. In house products include: Insulated specialist supports for high temperature and cryogenic pipe systems Acoustic Pipe Supports

Slider Plate Assemblies Anchor Bolts and Plates

Blinds and Spacers for pipelines Pipe Support Components

Technical publications describing the products are available from our Sales Department.

Important Note Maineport Ltd’s continuous improvement policy means that this catalogue may be updated – check with our sales department. This information is for your guidance: if you require any further assistance, please contact our Sales Department. We have endeavoured in this catalogue to make the information as accurate as possible, be we cannot accept any responsibility should it be found that any respect the information is inaccurate or incomplete or becomes so as a result of further developments.

2

MAINEPORT LTD Standard Pipe Supports INDEX

Introduction 3 Alloy Clamp (ICR - ½ Mo Steel) 53

Beam Attachment 55/56 Pictorial Index Hanger Rods 57 Standard Fabricated Supports 5 Elbow Lug 58 Welding Lug 59 Pictorial Index Long Welding Lug 60 Standard Pipe Supports Components 7 Strap Guide 61 Anchor 61 Fabrication Pipe Supports ‘U’ Bolt 62 Type FT – “T” Post 9 Forged Clevis 63 Type FU – “U” Post 11 Forged Weldless Eye 64 Type FG – Goal Post 13 Forged Turnbuckle 65 Type FG – Cantilever Bracket 15 Spherical Washer 66 Type FA – Angle Bracket 17 Spherical Cup 67 Type FL – ‘L’ Bracket 19 Wrapper Plate 68 Type FB – Base Support 21 Washer Plate 69 Type FTG – Trunnion Guide 23 Base Plate 70 Type FUG – Guide 25 Standard Pipe Hanger Assembly 71 Type FIG – Guide/Stop 27 Type FSW – Welded Pipe Shoe 29 Type FSC – Clamped Pipe Shoe 31 Type FTR – Trunnion 33 Type FVG – Guide FVS – Support 35 Type FVB – Bracket 37 Field Engineered - Small Bore Pipe Supports Introduction 39 FIELD RUN PIPING 1. Support Spacing 40 2. Hanger Arrangement 42 3. Pipe Shoe Arrangement 42 4. Guide/Support Bracket (Single Pipe) Vertical Run 43 5. Suspended Bracket (Multiple Pipes) 44 6. Tee Bracket 45 7. Pipe to Pipe Brackets 45 Continued 46 Ordered Field Run Material 47 Standard Components Introduction/Index 48 2-Bolt Clamp 49 3-Bolt Clamp 51

3

Introduction MAINEPORT LTD manufacture a range of fabricated pipe supports and ancillary components for piping systems used in the energy and process industries. The brochure provides design guidance, technical details and reference data to enable designers to select the appropriate equipment for each support application and schedule total requirements from collated data.

Section 1:Fabricated Pipe Supports This section details standard configurations for steelwork, with relevant design guidance for selection, dimensions, fabrication and installation. The standardisation of fabricated assemblies enables customers to specify and schedule supports without engineering drawings. Special supports can be incorporated as required by the engineering design. Our system offers customers the choice of specifying their own engineered pipe support details or MAINEPORT LTD’s schedule.

Section 2:Field Engineered Pipe Supports This section provides guidance to field engineers responsible for site-run small bore piping. Detailed recommendations on how to support piping runs reflect MAINEPORT LTD’s 60 years of experience in the fabrication and installation of piping systems. The integrity of small bore systems can be critical to plant operation and safety, therefore the supports must be satisfactorily designed and installed.

Section 3:Field Engineered Pipe Supports This section details a rationalised section of components designed to be incorporated in support assemblies, reflecting current industry practice. Note: reference should be made to MAINEPORT LTD product brochures for PTFE Sliders and Insulated Supports when selecting support components.

4

General Catalogue Details Materials: all items are manufactured from BS EN 10025 Grade FE430A unless otherwise

stated. Cr.Mo., stainless steel and low temperature carbon steel materials are available on request.

Finish: supports are supplied self colour or coated to customer’s specifications:

galvanised, electroplated, plastic coated or painted finishes are available. Dimensions: dimensions are in millimetres unless otherwise stated: sectional steel to any

national standard, or British equivalent can be supplied. Loads: maximum recommended loads are given in KN unless otherwise stated.

Quality Assurance Manufacture of all MAINEPORT LTD products is carried out in accordance with BSEN ISO 9001 specification. MAINEPORT LTD are a quality assured company registered with the British Standards Institution, and maintain the required quality systems.

5

Pictorial Index Standard Fabricated Supports

Type FT – ‘T’ Post Page 9 Type FU – ‘U’ Frame Page 11

Type FG – Goal Post Page 13 Type FC – Cantilever Bracket Page 15

Type FA – Angle Bracket Page 17 Type FL – ‘L’ Bracket Page 19

Type FB – Base Support Page 21 Type FTG – Trunnion Guide Page 23

6

Pictorial Index Standard Fabricated Supports

Type FUG – Guide Page 25 Type FIG – Base Support Page 27

Type FSW – Welded Pipe Shoe Page 29 Type FSC – Clamped Pipe Shoe Page 31

Type FTR – Trunnion Page 33 Type FVG – Guide Page 35

Type FVS – Support Page 35 Type FVB – Bracket Page 37

7

Pictorial Index Standard Pipe Support Components

2-Bolt Clamp Standard: Type PC1 Heavy: Type PC2 Page 49

3-Bolt Clamp Page 51

Standard: Type PC3 Heavy: Type PC4

Alloy Clamp Page 53

Standard: Type PC5 Heavy: Type PC6

Beam Attachment Type BA1

Page 55

Beam Attachment Type BA2

Page 56

Hanger Rods Page 57

Type HI

Type HT Type HS

Elbow Lug – Type LE Page 58 Welding Lug Type LW

Page 59 Long Welding Lug -

Type LLW Page 60

8

Pictorial Index Standard Pipe Support Components

Strap Guide – Type PG1 Strap Anchor – Type PA1

Page 61 ‘U’ Bolt – Type PU Page 62

Forged Clevis Type RC1

Page 63

Forged Turnbuckle Type RC3

Page 65

Forged Weldless Eye Type RC2 Page 64

Spherical Cup – Type RC5 Page 67

Spherical Washer – Type RC4 Page 66 Wrapper Plate –Type PW1 Page 68

Washer Plate –Type PW2 Page 69 Base Plate –Type BP1 Page 71

9

Fabricated Support: Type FT – ‘T’ Post DESIGN GUIDE Steel Section

MAX CONCENTRIC LOAD (KN)

HEIGHT ‘A’ SIZE OF

STEEL SECTION 600 800 1200 1500 1800 2000 2200 2400

100 x 100 x 12 L 12 8 6

152 x 152 x 23 UC 43 29 22 18 14 12 10 9

203 x 203 x 46 UC 115 83 63 51 43 39 35 32

Baseplate

SIZE OF STEEL SECTION

PLATE SQ A

PLATE THK B

HOLE CTRS C

HOLE DIA D

100 x 100 x 12 L 200 12 140 14

152 x 152 x 23 UC 300 15 230 22

203 x 203 x 46 UC 400 20 320 27

Anchor Bolts

HOLE DIA

D

STUD DIA

A

STUD LENGTH

B

HOLE DIA

C

HOLE DEPTH

D

TORQUE E(Nm)

14 M12 160 14 110 45

22 M20 240 24 145 200

27 M24 295 32 180 350

10

3 4 No ANCHOR BOLTS

2 BASEPLATE

1 X X UC L

A B C D E ITEM CODE DESCRIPTION

DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FT – ‘T’ POST

MARK No.

QTY

11

Fabricated Pipe Support: Type FU – ‘U’ Frame DESIGN GUIDE

Steel Section SPAN ‘A’ (m) SIZE OF

STEEL SECTION 0.6 0.9 1.2 1.5 1.8 2.0

80 x 80 x 8 L 2.6 2.1 1.6

100 x 100 x 12 L 34 24 16 9.0

152 x 89 CH 52 40 30 24

152 x 152 x 23 UC 80 78 55 43 35 29

MAX VERT LOAD (KN) B ≤ A

Call up standard baseplates BP1 and anchor bolts if bolting frame to concrete (see section 3).

12

1 L

X X UC CH


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FU – ‘U’ FRAME

MARK No.

QTY

13

Fabricated Pipe Support: Type FU – ‘U’ Frame DESIGN GUIDE Support can be specified with base plates for fixing to concrete, or without for welding to steel. Section can be RSA or UC.

MAX VERT LOAD (KN) B ≤ A

SPAN ‘A’ SIZE OF

STEEL SECTION 0.6 0.9 1.2 1.5 1.8 2.0

100 x 100 x 12 RSA 34 24 16

152 x 89 CH 52 40 30 25

152 x 152 x 23 UC 80 62 47 39 22 12

Baseplate


PLATE SQ A

PLATE THK

B

HOLE CTRS

C

HOLE DIA

D

100 x 100 x 12 L 200 12 140 14

152 x 152 x 23 UC 300 15 230 22

Anchor Bolts

HOLE DIA

D

STUD DIA

A

STUD LENGTH

B

HOLE DIA

C

HOLE DEPTH

D

TORQUE E(Nm)

14 M12 160 14 110 45

22 M20 240 24 145 200

14

3 No. ANCHOR BOLTS

2 No. BASEPLATE

1 L

X X UC CH


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FG – GOAL POST

MARK No.

QTY

15

Fabricated Pipe Support: Type FC – Cantilever Bracket DESIGN GUIDE

Steel Section PIPE SIZE mm


DIM B

DIM C

HOLE DIA

D

MAX LOAD KN

50 80 x 80 x 8L 60 71 12 1.1

80 80 x 80 x 8L 75 103 14 1.1

100 100 x 100 x 12 L 90 128 14 2.2

150 100 x 100 x 12 L 120 187 18 2.2

200 152 x 152 x 23 UC 155 238 18 8.9

A 30 x 30 x 10 shear lug may be welded to the pipe so that bracket acts as a support, rather than a guide. Refer to standard baseplate drawing if end plate required for bolting to steel/concrete.

16

2 U BOLT TYPE RC 4

1 L

X X UC


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FC– CANTILEVER BRACKET

MARK No.

QTY

17

Fabricated Pipe Support: Type FA – Angle Bracket DESIGN GUIDE

Steel Section SIZE OF

STEEL SECTION DIM

A DIM

B DIM

C MAX LOAD

KN

50 x 50 x 6L 600 450 315 2.2

80 x 80 x 8L 900 600 520 3.6

100 x 100 x 12 L 1200 900 750 8.9

127 x 64 CH 1200 900 750 17

152 x 152 x 23 UC 1200 900 750 25

Refer to standard baseplate drawing if end plate required for bolting to steel/concrete.

18

1 L

X X UC CH


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FA – ANGLE BRACKET

MARK No.

QTY

19

Fabricated Pipe Support: Type FL – ‘L’ Bracket DESIGN GUIDE

Steel Section SIZE OF

STEEL SECTION MAX VERTICAL

LOAD (KN) D

DIA

80 x 80 x 8L 1.8 14

100 x 100 x 12 L 5.0 18

127 x 64 CH 9.0 22

152 x 152 x 23 UC 11.7 22

Anchor Bolts (if required) DRILLING D

DIA STUD DIA

A STUD

LENGTH B D/A C DEPTH D

TOURQUE E(Nm)

14 M12 160 14 110 45

18 M16 190 18 125 100

22 M20 240 24 145 200

20

2 2 No. ANCHOR BOLTS

1 L

X X UC CH


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FL– ‘L’ BRACKET

MARK No.

QTY

21

Fabricated Pipe Support: Type FB – Base Support (150 NB Max) DESIGN GUIDE

Steel Section HEIGHT ‘A’ VERTICAL

MEMBER 300 450 600 750

50 x 50 x 6 L 1.4 1.1 0.8 0.7

80 x 80 x 8 L 2.7 2.0 1.6 1.4

100 x 100 x 12 L 5.5 4.2 3.4 2.9

MAX VERT LOAD (KN)

Cross brace can be welded on site to suit vertical or horizontal pipe. A 30 x 30 x 10 shear lug may be welded to the pipe so that the bracket acts as a support, rather than a guide, for vertical pipes.

22

2 U BOLT TYPE RC4

1 X X L


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FB– BASE SUPPORT

MARK No.

QTY

23

Guides & Stops: Type FTG – Trunnion Guide DESIGN GUIDE

TRUNNION NB mm

TRUNNION B’ PLATE SQ (Ref)

‘A’ SQ PLATE

THK ‘B’

GUIDE SECTION WEIGHT

KG

40 150 300 12 50 x 50 x 6L x 150 LG 9.8

50 150 300 12 “ 9.8

80 150 300 12 “ 9.8

100 200 350 12 “ 12.9

150 250 400 12 “ 16.4

200 300 450 12 “ 20.4

250 350 500 12 “ 24.9

300 450 650 12 80 x 80 x 8L x 200 LG 53.6

350 450 650 15 “ 53.6

400 550 750 15 “ 75.0

450 550 750 15 “ 75.0

500 600 800 15 “ 79.0

600 750 900 15 “ 99.0

Anchor Bolts Use 4-M12 Kemfix Bolts (or equal) M12 Stud Cat No 60-460 M12 Capsule Cat No 60-412

24

2 X X L

1 BASEPLATE


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FTG– GUIDE

MARK No.

QTY

25

Guides & Stops: Type FUG – Uninsulated Lines DESIGN GUIDE

PIPE NB mm

HEIGHT A

HEIGHT B

STEEL SECTION

MAX LOAD

KN

UNIT WEIGHT

KG

25 70 - 50 x 50 x 6L 2.2 0.6

40 80 - “ “ 0.7

50 100 - “ “ 0.7

80 100 - “ “ 0.9

100 120 - 80 x 80 x 8L 3.3 2.3

150 140 - “ “ 2.7

200 160 - 100 x 100 x 8L 8.5 3.9

250 180 - “ “ 4.4

300 200 - 120 x 120 x 8L 9.8 5.9

350 - 17 203 x 102 x 25 I 17.8 9.5

400 - 24 “ “ “

450 - 30 “ “ “

500 - 38 “ “ “

600 - 52 “ “ “

Height ‘B’ specified for field installation guidance only.

26

2 203 x 102 x 25.33 RSJ

1 X X L


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FUG– GUIDE

MARK No.

QTY

27

Guides & Stops: Type FUG – Insulated Lines DESIGN GUIDE

PIPE NB mm

STEEL SECTION ITEM 1

LENGTH A

MAX LOAD KN

WEIGHT KG

25-150 ½ 203 x 102 x 25 I 100 43 2.5

200-400 80 x 80 x 8 L 300 48 5.9

450-600 80 x 80 x 8 L 450 48 9.0

750 100 x 100 x 12 L 580 87 21

900 100 x 100 x 12 L 660 87 24

1050 100 x 100 x 12 L 740 87 27

28

1 X X L

RSJ


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FIG– GUIDE/STOP

MARK No.

QTY

29

Fabricated Pipe Support: Type FSW – Welded Pipe Shoe DESIGN GUIDE

PIPE

NB mm

WIDTH B

UNIT WEIGHT KG (A=300, C=100)

25-150 100 4.7

200-300 150 6.8

350-400 200 7.8

450-600 250 9.2

Standard shoe length ‘A’ = 300 or 450mm. (For line movement M above 175mm. A = 100 + 2M). Shoe length ‘C’ depends on pipe insulation thickness: standard height = 100mm.

30

2 GUIDE 40 x 40 x 6 L

1 SHOE


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FUG– GUIDE

MARK No.

QTY

31

Fabricated Pipe Support: Type FSC – Clamped Pipe Shoe DESIGN GUIDE

PIPE

NB mm

WIDTH B

UNIT WEIGHT KG (A = 300, C = 100)

25 100 5.4

40 100 5.6

50 100 5.8

80 100 6.0

100 100 7.3

150 100 10.5

200 150 13.6

250 150 19.6

300 150 21.0

350 200 29.0

400 200 35.0

450 250 40.0

500 250 43.0

600 250 59.4

Standard shoe length ‘A’ = 300 or 450mm. (For line movement M above 175mm. A = 100 + 2M). Shoe height ‘C’ depends on pipe insulation thickness: standard height = 100mm

32

2 GUIDE 40 x 40 x 6 L

1 SHOE


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FSC– CLAMPED PIPE SHOE

MARK No.

QTY

33

Fabricated Support: Type FTR – Vertical/Horizontal Trunnion DESIGN GUIDE Trunnion material, size and schedule is to be specified by the piping stress engineer. Trunnion length ‘C’ should include site trim allowance. Base plate/End plate optional: end plates for horizontal trunnions 12mm thick for all sizes. Base plate holes optional: see table below for anchor bolt sizes.

BASEPLATE ANCHOR BOLTS

DRILLING Trunnion NB mm (in)

A Sq

B Ctrs

C Thk

D Dia

A Dia

B Lgth C Dia D Dpth

Torque ‘E’ Nm

40(1 ½”) 150 100 12 14 M12 160 14 110 45

50(2”) 150 100 12 14 M12 160 14 110 45

80(3”) 150 100 12 14 M12 160 14 110 45

100(4”) 200 140 15 18 M16 190 18 125 100

150(6”) 250 190 15 18 M16 190 18 125 100

200(8”) 300 230 15 24 M20 240 24 145 200

250(10”) 350 270 20 27 M24

300(12”) 450 350 20 33 M30

350(14”) 450 350 20 33 M30

400(16”) 550 430 25 39 M36

450(18”) 550 430 25 39 M36

500(20”) 600 480 25 39 M36

Refer to MAINEPORT LTD anchor bolt catalogue for bolts > M20.

34

3 ANCHOR BOLTS (4 No.)

2 BASE/END PLATE

1 TRUNNION


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FTR – TRUNNION

MARK No.

QTY

35

Vessel-Mounted Supports: Type FVG - Guide Type FVS – Support Lines 200-600 NB

DESIGN GUIDE The unit can be specified as a guide or support and dimensioned accordingly. When acting as a guide, standard pipe shoes in the required configuration should be specified as shown in the sketch. The support type is used in conjunction with pipe trunnions and requires stiffener plates as shown. Maximum load (vertical): 54KN Maximum load (horizontal): 15KN The unit can be specified without the brace as a guide only (max horizontal load 18KN).

OPTIONAL GUIDE CONFIGURATION.

36

1


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FVG–GUIDE TYPE FVS–SUPPORT

MARK No.

QTY

37

Vessel-Mounted Supports: Type FVB - Bracket Lines 50-200 NB

DESIGN GUIDE This unit can be specified as a guide or support (shear lug required).

ENDPLATE PIPE NB mm

SIZE OF STEEL SECTION A B C D

MAX LOAD

KN

50 80 x 80 x 8 L 150 12 71 12 1.1

80 80 x 80 x 8 L 150 12 103 14 1.1

100 100 x 100 x 12 L 200 12 128 14 2.2

150 100 x 100 x 12 L 250 12 187 18 2.2

200 152 x 152 x 23 UC 300 12 238 18 8.9

38

3 ENDPLATE

2 ‘U’ BOLT TYPE RC4

1 x x L UC


DIMENSION

DRG No.

FABRICATED PIPE SUPPORT TYPE FVB – BRACKET

MARK No.

QTY

39

Field Engineered Small Bore Pipe Supports This section gives recommended details to aid field engineers responsible for the design and installation of small bore field-run piping (50mm NB and below).

General 1. Position supports and guides in accordance with the recommended spans and overhangs shown in

tables overleaf. 2. Use standard pipe shoes, ‘U’ Bolts and angle frames as detailed overleaf. 3. Hanger type supports should be avoided if possible; where necessary, limit hanger length to

1800mm, and load to 275kg. 4. Refer to section 3 for details of standard components, and hanger assemblies where necessary. 5. Use the pipe support data schedule (PSDS) to call up the supports required (page 105). 6. Use the special support drawing sheet to sketch any special configurations required (page 106). 7. Refer to section 4: reference data, for weights of pipe and fittings.

40

Field Run Piping 1. Support Spacing

LINE SIZE

(mm) MAX SUPPORT

SPACING (m) VERT. GUIDE SPACING (m)

GUIDE SPACING (m)

*WEIGHT –Full of water (KgM)

20 4.0 6.1 10.7 2.6

25 4.3 6.1 10.7 3.8

40 5.2 7.0 10.7 6.6

50 5.5 7.3 10.7 9.4

*Add 4.5 Kg/M for Insulated Lines.

LINE SIZE (mm)

DIMENSION ‘A’ (in mm) DIMENSION ‘B’ (in m)

20 1.2 1.5 1.8 2.1 2.4 2.8 1.9 1.5 1.4 1.3

25 1.2 1.5 1.8 2.1 2.4 3.3 2.3 1.8 1.5 1.5

40 1.5 1.8 2.1 2.4 2.7 3.6 2.7 2.3 2.0 1.8

50 1.8 2.1 2.4 2.7 3.0 4.3 3.4 2.7 2.4 2.2

COLUMN a b c d e a b c d e

Note: To find permissible overhangs: Match column for Dimension ‘A’ with similar column for Dimension ‘B’.

41

Field Run Piping

LINE SIZE (mm)

DIMENSION ‘A’ (in mm) DIMENSION ‘B’ (in m)

20 0.8 0.9 1.1 1.2 1.4 3.5 2.6 2.0 1.4 0.9

25 0.9 1.1 1.2 1.4 1.5 3.0 2.4 1.8 1.4 0.9

40 0.9 1.1 1.2 1.4 1.5 4.6 4.0 3.3 2.6 2.1

50 1.1 1.2 1.4 1.5 1.8 4.6 4.0 3.3 2.7 1.7

COLUMN a b c d e a b c d e

20 0.4 0.7 1.1 1.3 1.8 3.7 2.9 1.5 0.4 0.4 1.6 0.8 1.1 1.8 1.2

25 0.4 0.9 1.3 1.7 2.1 4.3 2.6 1.7 1.3 1.7 1.7 1.3 1.2 1.1 0.9

40 0.5 1.1 1.6 2.2 2.7 5.5 3.3 2.2 1.1 2.2 2.2 1.6 1.5 1.6 1.0

50 0.6 1.2 1.8 2.4 3.0 6.1 3.6 3.7 1.2 1.2 2.4 1.8 0.9 1.5 1.4

COLUMN a b c d e a b c d e a b c d e

LINE SIZE

(mm) DIMENSION 'A' (in m) DIMENSION 'B' (in mm) DIMENSION 'C' (in mm)

Note: To find permissible overhangs: Match column for Dimension ‘A’ with similar column for Dimension ‘B’ and Dimension ‘C’.

42

Field Run Piping 2. Hanger Arrangement

Note: Maximum deflection from vertical 5º (85mm per 1m red).

3. Pipe Shoe Arrangement

Note: Use clamp shoe for stainless steel and galvanised lines, shoe length depends on total pipe movement.

43

Field Run Piping 4 . Guide/Support Bracket (single pipe) Vertical Run

LINE SIZE (mm)

DIA OF U-BOLT

U-BOLT CENTRES

DIA OF DRILLING

15 6 30 8

20 6 35 8

25 6 41 8

40 10 60 12

50 10 71 12

HORIZONTAL RUN ‘A’ mm ANGLE ‘C’ MAX LOAD

KG

305 50 x 50 x 6 L 110

450 50 x 50 x 6 L 55

600 50 x 50 x 6 L 36

600 80 x 80 x 6 L 135

750 80 x 80 x 6 L 115

900 80 x 80 x 6 L 90

1050 80 x 80 x 6 L 80

1220 80 x 80 x 6 L 68

Note: Maximum load is limit of bracket only. The capacity of '‘Existing Steel’ should be reviewed.

44

Field Run Piping 5. Suspended Bracket (multiple pipes)

‘A’ mm ‘B’ mm ANGLE ‘C’ MAX LOAD KG

305 305 50 x 50 x 6 L 90

450 450 50 x 50 x 6 L 70

60 60 50 x 50 x 6 L 35

600 600 80 x 80 x 6 L 70

900 900 80 x 80 x 6 L 45

1200 1200 80 x 80 x 6 L 40


305 305 50 x 50 x 6 L 250

450 450 50 x 50 x 6 L 215

60 60 50 x 50 x 6 L 160

600 600 80 x 80 x 6 L 280

900 900 80 x 80 x 6 L 220

1200 1200 80 x 80 x 6 L 165

45

Field Run Piping 6. Tee Bracket


305 305 50 x 50 x 6 L 90

450 450 50 x 50 x 6 L 70

60 60 50 x 50 x 6 L 35

600 600 80 x 80 x 6 L 70

900 900 80 x 80 x 6 L 45

1200 1200 80 x 80 x 6 L 40

7. Pipe to Pipe Brackets

‘A’ mm ANGLE ‘C’ MAX LOAD

KG

350 50 x 50 x 6 L 35

450 50 x 50 x 6 L 30

600 50 x 50 x 6 L 25

600 80 x 80 x 6 L 55

750 80 x 80 x 6 L 45

900 80 x 80 x 6 L 40

1220 80 x 80 x 6 L 35

For U-Bolt see details overleaf.

46

Field Run Piping Pipe to Pipe Brackets (cont)


KG

305 50 x 50 x 6 L 55

600 50 x 50 x 6 L 25


KG

305 50 x 50 x 6 L 85

600 50 x 50 x 6 L 45

600 50 x 50 x 6 L 90

900 50 x 50 x 6 L 60

1220 50 x 50 x 6 L 45

47

Field Run Piping

DESIGN DATA FOR U-BOLT ‘J’ AND ‘H’

SUPPORTED LINE SIZE

U-BOLT DIA. (mm)

CENTRE TO CENTRE DRILLING (mm)

DIA OF DRILLING (mm)

15 AND 20 6 30/45 8

25 6 41 8

40 10 60 12

50 10 71 12

SUPPORTING LINE SIZE

U-BOLT DIA (mm)

CENTRE TO CENTRE DRILLING (mm)

DIA OF DRILLING (mm)

80 12 103 15

100 12 120 15

150 16 187 20

200 16 238 20

250 20 295 25

300 20 349 25

8. To order field run material Use standard fabrication drawings (see Section 1) and complete data tables for issue to fabrication shop. Alternatively, specify standard components by reference to part codes and sizes detailed in Section 3, and total quantity of rolled steel angle (supplied as 6m random lengths). Angle can be ordered self colour, blast primed or coated to customers’ specification.

48

Standard Components This section contains details of the MAINEPORT LTD standard range of Pipe Support Components: Page 49-53 Pipe Clamps 55-56 Beam Attachments 57 Hanger Rods 58 Welding Lugs 61 Strap 62 ‘U’ Bolts 63-65 Forged Clevises, Weldless Eye Nuts & Turnbuckles 66-67 Malleable Iron Spherical Cups & Washers 68 Wrapper Plates 69 Washer Plates 70 Base Plates 71 Standard Hanger Assemblies Dimensions and weights of each component are tabulated, together with the maximum recommended loads where applicable. Components can be called up individually or as a complete assembly, using the standard assembly drawing and the pipe support data schedule. Note Standard components to BS 3974 are also available from MAINEPORT LTD, in addition to our standard range.

49

Standard Components 2-Bolt Clamp: Standard: Type PC1 Heavy: Type PC2

SPECIFY: Type and Nom. Pipe Size

50

2-Bolt Clamp: Standard: Type PC1

NOM PIPE SIZE

PIPE O/D

A B C BOLT

D MATL W x T

MAX LOAD N.

340ºC

WEIGHT KG

15 21.3 32 51 12 M10 25 x 3 2210 0.21

20 26.7 32 51 12 M10 25 x 3 2210 0.22

25 33.4 38 57 12 M10 25 x 3 2210 0.23

40 48.3 51 70 12 M10 30 x 5 3580 0.48

50 60.3 57 76 12 M12 30 x 5 4465 0.57

80 88.9 76 96 16 M12 30 x 5 4465 0.71

100 114.3 95 114 20 M16 40 x 6 4465 1.38

150 168.3 127 152 24 M20 40 x 10 7110 3.06

200 219.1 159 184 24 M20 40 x 10 7110 3.64

250 273.0 190 222 27 M24 50 x 12 10700 6.57

300 323.9 216 248 27 M24 50 x 12 10700 7.33

350 355.6 235 273 27 M24 65 x 12 10700 10.1

400 406.4 260 298 27 M24 65 x 12 10700 11.0

450 457.0 298 343 30 M24 65 x 15 13340 15.4

500 508.8 324 375 40 M24 65 x 15 13340 16.9

600 610.0 387 438 40 M30 65 x 15 13340 20.7

Heavy: Type PC2

NOM PIPE SIZE

PIPE O/D

A B C BOLT

D MATL W x T

MAX LOAD N.

340ºC

WEIGHT KG

40 48.3 50 70 16 M12 40 x 6 4900 0.77

50 60.3 58 85 16 M12 40 x 6 4900 0.91

65 73.0 70 96 20 M16 40 x 6 4900 1.16

80 89.9 85 110 20 M20 40 x 6 14719 1.54

100 114.3 96 127 24 M24 50 x 10 15600 3.36

150 168.3 135 175 28 M24 65 x 12 21385 6.35

200 219.1 160 200 34 M24 65 x 12 21385 7.32

250 273.0 200 235 34 M30 65 x 15 26680 11.4

300 323.9 235 280 40 M30 80 x 20 38260 20.6

350 355.6 255 305 40 M36 90 x 20 40515 25.8

400 406.4 280 330 40 M36 90 x 20 10515 28.0

450 457.0 305 360 40 M36 90 x 20 40515 30.6

500 508.0 330 385 40 M36 90 x 20 40515 32.8

600 610.0 395 445 40 M36 90 x 20 40515 37.8

51

3-Bolt Clamp: Standard: Type PC3 Heavy: Type PC4

Specify: Type & Nom. Pipe Size

52

3-Bolt Clamp

Standard: Type PC3

SWL (N) NOM PIPE SIZE

PIPE O/D 340ºC 400ºC

A B C D STEEL

SIZE F

G H WT KG

40 48.3 6670 6230 102 44 25 M12 30 x 6 124 60 0.86

50 60.3 6670 6230 127 54 25 M12 30 x 6 149 70 0.98

80 88.9 6670 6230 152 70 25 M12 30 x 6 175 89 1.16

100 114.3 11135 9810 165 86 25 M16 50 x 10 194 114 3.48

150 168.3 12455 11135 216 121 38 M20 65 x 10 254 155 6.16

200 219.1 12455 11135 241 146 38 M20 65 x 10 279 181 6.98

250 273.0 14225 12900 279 178 38 M20 65 x 12 317 210 9.42

300 323.9 14225 12900 305 203 38 M20 65 x 12 343 235 10.4

350 355.6 19130 16920 330 229 51 M24 80 x 15 378 273 17.9

400 406.4 19130 16920 356 258 51 M24 80 x 15 403 298 19.3

450 457.2 19130 16920 381 285 51 M24 80 x 15 429 324 20.6

500 508.0 24475 21775 406 320 51 M24 80 x 20 457 356 29.5

600 609.6 26680 23590 457 372 51 M24 100 x 20 514 406 41.5

750 762.0 35610 31145 610 470 51 M30 130 x 25 673 508 85.8

900 914.4 35610 31145 699 550 51 M30 130 x 25 762 597 99.3

Heavy: Type PC4


PIPE O/D 340ºC 400ºC

A B C D STEEL

SIZE F

G H WT KG

150 168.3 35610 31585 229 138 44 M30 100 x 12 279 178 13.5

200 219.1 35610 31585 254 168 44 M30 100 x 12 305 216 15.2

250 273.0 48950 43605 305 210 51 M36 100 x 20 356 254 28.9

300 323.9 48950 43605 330 243 51 M42 100 x 20 381 286 41.4

350 355.6 56505 50275 356 256 57 M42 110 x 20 413 305 46.5

400 406.4 56505 50275 381 283 57 M42 110 x 20 438 330 49.3

450 457.2 56505 50275 406 310 57 M42 110 x 20 464 356 52.0

500 508.0 66755 66755 457 348 57 M42 130 x 25 521 394 75.9

600 609.6 66755 66755 508 412 57 M42 150 x 30 584 457 113

750 762.0 66755 66755 635 495 57 M42 150 x 30 711 546 134

900 914.4 66755 66755 711 570 57 M42 150 x 30 787 622 151

53

Standard Components Alloy Clamp (ICr-½ Mo Steel): Standard: Type PC5 Heavy: Type PC6

SPECIFY: Type & Nom. Pipe Size

54

Alloy Clamp (ICr-½ Mo Steel): Standard: Type PC5


PIPE O/D 510ºC 538ºC 566ºC

A B C D STEEL

SIZE F

G H WT KG

40 48.3 6230 4460 3090 102 44 25 M12 30 x 6 124 60 0.86

50 60.3 6230 4460 3090 127 54 25 M12 30 x 6 149 70 0.98

80 88.9 6230 4460 3090 152 70 25 M12 30 x 6 175 89 1.16

100 114.3 10250 7110 4905 165 86 25 M16 50 x 10 194 114 3.48

150 168.3 11575 7995 5785 216 121 38 M20 65 x 10 254 155 6.16

200 219.1 11575 7995 5785 241 146 38 M20 65 x 10 279 181 6.98

250 273.0 13341 9320 6670 279 178 38 M20 65 x 12 317 210 9.42

300 323.9 13341 9320 6670 305 203 38 M20 65 x 12 343 235 10.4

350 355.6 17360 12450 8927 330 229 51 M24 80 x 15 378 273 17.9

400 406.4 17360 12450 8927 356 258 51 M24 80 x 15 403 298 19.3

450 457.2 17360 12450 8927 381 285 51 M24 80 x 15 429 324 20.6

500 508.0 22265 14225 11135 406 320 51 M24 80 x 15 457 356 29.5

600 609.6 24475 15595 12015 457 372 51 M24 100 x 20 514 406 41.5

750 762.0 32030 20450 15595 610 470 51 M30 130 x 25 673 508 85.8

900 914.4 32030 20450 15595 699 550 51 M30 130 x 25 762 597 99.3

Heavy: Type PC6


PIPE O/D 510ºC 538ºC 566ºC

A B C D STEEL

SIZE F

G H WT KG

150 168.3 32470 23150 16480 229 138 44 M30 100 x 12 279 178 13.5

200 219.1 32470 23150 16480 254 168 44 M30 100 x 12 305 216 15.2

250 273.0 44485 32030 22265 305 210 51 M36 100 x 20 356 254 28.9

300 323.9 44485 32030 22265 330 243 51 M42 100 x 20 381 286 41.4

350 355.6 51600 36935 26680 356 256 57 M42 110 x 20 413 305 46.5

400 406.4 51600 36935 26680 381 283 57 M42 110 x 20 438 330 49.3

450 457.2 51600 36935 26680 406 310 57 M42 110 x 20 464 356 52.0

500 508.0 66755 47185 33355 457 348 57 M42 130 x 25 521 394 75.9

600 609.6 66755 57880 40025 508 412 57 M42 150 x 30 584 457 113

750 762.0 66755 57880 40025 635 495 57 M42 150 x 30 711 546 134

900 914.4 66755 57880 40025 711 570 57 M42 150 x 30 787 622 151

55

Standard Components Beam Attachment: Type BA1

SPECIFY: Rod dia. ‘D’

A B x C D E F PIN

G x N

MIN WELD W x L

S/PIN SIZE

H MAX

LOAD(N)

340ºC

WEIGHT

KG

50 50 x 6 M10 30 30 10 X 60 3 x 45 3 x 30 12 3725 0.37

65 50 x 6 M10 30 30 10 X 60 3 x 45 3 x 30 14 5940 0.43

70 50 x 6 M16 45 30 16 X 60 3 x 45 3 x 30 18 10200 0.52

85 80 x 10 M20 55 35 20 X 70 4 x 55 3 x 40 22 15990 1.53

120 80 x 10 M24 70 40 24 x 70 4 x 65 3 x 40 26 23150 1.95

125 100 x 12 M30 80 50 30 x 100 5 x 90 4 x 50 32 36785 3.51

160 130 x 15 M36 100 70 36 x 125 6 x 110 4 x 60 39 53560 7.22

180 130 x 15 M42 110 90 42 x 140 8 x 110 4 x 70 45 73375 8.69

210 150 x 20 M48 130 90 48 x 160 8 x 140 5 x 70 51 96330 14.7

235 180 x 20 M56 145 100 56 x 170 10 x 155 5 x 80 60 133020 17.2

255 200 x 20 M64 160 110 64 x 180 12 x 165 5 x 90 68 175600 24.8

280 220 x 25 M72 180 120 72 x 200 15 x 170 8 x 100 76 223080 37.1

300 250 x 25 M80 200 130 80 x 220 15 x 210 8 x 100 84 280565 46.1

335 300 x 30 M90 220 140 90 x 240 15 x 265 10 x 120 94 353160 71.5

375 300 x 40 M100 260 150 100 x 280 18 x 275 10 x 120 104 438505 280

56

Beam Attachment: Type BA2

SPECIFY: Rod dia. ‘D’

A B x C D E F H MIN

WELD W x L

MAX LOAD(N)

340ºC

WEIGHT KG

75 50 x 6 M10 30 40 12 3 x 45 3725 0.46

75 50 x 6 M12 30 40 14 3 x 45 5490 0.46

85 80 x 10 M16 30 60 18 3 x 45 10200 1.51

85 80 x 10 M20 30 70 22 4 x 55 15990 1.57

115 100 x 12 M24 40 75 26 4 x 75 23150 2.99

120 100 x 15 M30 40 110 32 5 x 90 36785 4.30

165 150 x 15 M36 60 120 39 6 x 110 53560 8.22

200 150 x 20 M42 70 140 45 8 x 110 73375 13.1

210 150 x 25 M48 70 175 51 8 x 140 96330 16.6

240 180 x 25 M56 85 185 60 10 x 155 133020 24.2

250 180 x 30 M64 85 220 68 12 x 165 175600 31.5

260 200 x 30 M72 85 230 76 15 x 170 223080 36.7

57

Standard Components Hanger Rods- Eye Rod: Type HI Tie Rod: Type HT All Thread (Studding): Type HS

SPECIFY: Rod dia., length and thread, i.e. left hand/right hand

ROD DIAMETER

MINIMUM THREAD

LENGTH X

MAXIMUM LOAD (N)

340ºC

WEIGHT KG/M

10 100 3725 0.62

12 100 5495 0.89

16 100 10200 1.58

20 100 15990 2.47

24 100 23150 3.80

30 125 36785 5.55

36 150 53560 7.66

42 150 73380 10.88

48 200 96335 14.20

56 225 133025 19.30

64 250 175600 25.20

72 215 223080 31.20

80 300 280565 38.50

90 300 353160 49.90

100 300 438505 61.60

58

Elbow Lug: Type LE

SPECIFY: Rod dia. & Elbow size/radius

M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 M80

5.030 9.050 12.100 22.100 27.700 51.700 69.800 92.100 121.000 149.000 185.000 225.000

12 12 12 15 15 20 25 25 25 25 25 30

90 90 90 127 127 178 178 216 216 248 248 248

38 38 38 50 50 76 76 89 89 95 95 95

18 22 28 37 43 52 58 63 68 74 78 93

ELBOW

SIZEC

80 190 297 297 297

100 190 294 294 294 343 343

150 220 325 325 325 360 360 455 455

200 220 330 330 330 360 360 440 440 485 485 510

250 215 330 330 330 360 360 430 430 470 470 490

300 210 335 335 365 365 430 430 465 465 465

350 190 340 370 370 435 435 470 470 490

400 185 375 375 435 435 470 470 485

450 180 375 375 435 435 465 465 485

500 200 405 465 465 500 500 515

600 215 497 497 525 525 542 542 542

750 210 540 540 555 555 555

R

H

A (mm)

ROD SIZE

MAX LOAD

(KN) 340ºC

T

D

59

Standard Components Welding Lug: Type LW

SPECIFY: Bolt dia. ‘D’

A B x C D

BOLT E H

MIN WELD

W.

MAXIMUM LOAD

(N)

340ºC

WEIGHT KG

55 50 x 6 M10 30 12 3 3725 0.13

65 50 x 6 M12 40 14 3 5495 0.15

75 50 x 6 M16 50 18 3 10200 0.18

90 80 x 10 M20 60 22 5 15990 0.56

115 80 x 10 M24 80 26 5 23150 0.72

135 100 x 12 M30 90 32 6 36785 1.27

175 130 x 15 M36 110 39 6 53560 2.68

200 130 x 15 M42 130 45 8 73375 3.06

235 150 x 20 M48 150 51 8 96330 5.53

260 180 x 20 M56 170 60 10 133025 7.35

295 200 x 20 M64 200 68 10 175600 9.26

325 220 x 25 M72 220 76 12 223080 14.0

340 250 x 25 M80 240 84 12 280565 16.7

385 300 x 30 M90 270 94 12 353160 27.2

415 300 x 40 M100 300 104 12 438505 39.1

60

Standard Components Long Welding Lug: Type LLW

SPECIFY: Bolt dia. ‘D’

A B x C D

BOLT E H

MIN WELD

W.

MAXIMUM LOAD

(N)

340ºC

WEIGHT KG

125 75 x 12 M10 100 12 6 3725 0.88

125 75 x 12 M12 100 14 6 5495 0.88

125 75 x 12 M16 100 18 6 10200 0.88

150 90 x 15 M20 115 22 6 15990 1.59

200 100 x 20 M24 115 26 6 23150 3.14

200 100 x 20 M30 150 32 6 36785 3.14

250 125 x 30 M36 180 39 6 53560 7.5

250 125 x 30 M42 180 45 8 73375 7.5

300 180 x 35 M48 210 51 8 96330 14.8

300 180 x 35 M56 210 60 10 133025 14.8

300 250 x 40 M64 190 68 10 175600 23.6

61

Standard Components Strap Guide: Type PG1 Anchor: Type PA1

SPECIFY: Type & Nom. Pipe Size

GUIDE ANCHOR NOMINAL PIPE SIZE

PIPE O/D

A B MATL

SIZE C D

R1 H1 R2 H2 WEIGHT

KG

15 21.3 45 60 40 x 5 12 12 11 11.5 8 0.25

20 26.7 45 60 40 x 5 12 15 14 14 11 0.27

25 33.4 50 70 40 x 5 12 19 17 18 15 0.32

40 48.3 60 80 40 x 8 14 26 25 25 22 0.62

50 60.3 70 100 40 x 8 14 32 31 37 28 0.81

80 88.9 99 137 50 x 10 18 47 45 46 41 1.69

100 114.3 108 146 50 x 10 18 60 58 59 54 1.91

150 168.3 155 200 60 x 15 26 87 85 86 81 4.77

200 219.1 180 230 60 x 15 26 113 110 112 103 5.76

250 273.0 205 250 150 x 15 26 140 137 139 130 16.6

300 323.9 230 275 150 x 15 26 165 162 164 155 18.9

350 355.6 245 290 150 x 15 26 181 178 180 170 20.3

400 406.4 285 330 200 x 20 26 206 204 205 197 41.1

450 457.2 310 355 200 x 20 26 232 229 231 220 45.2

500 508.0 335 380 200 x 20 26 257 254 256 245 49.2

62

‘U’ Bolt: Type PU

SPECIFY: Nom. Pipe Size

NOMINAL PIPE SIZE

PIPE O/D

C A E D MAX

LOAD M

WEIGHT KG

15 21.3 30 6 63 63 2160 0.1

20 33.4 35 6 63 67 2160 0.1

25 33.4 41 6 63 70 2160 0.1

40 48.3 70 10 63 78 5350 0.21

50 60.3 71 10 63 83 5350 0.21

80 88.9 103 12 76 102 9810 0.29

100 114.3 128 12 76 114 9810 0.36

150 168.3 187 16 95 156 16040 0.87

200 219.1 238 16 95 181 16040 1.15

250 273.0 295 20 102 213 24034 2.37

300 323.9 349 20 108 244 33400 2.69

350 355.6 381 20 108 260 33400 3.15

400 406.4 432 20 108 286 33400 3.58

450 457.0 486 24 121 321 43630 5.20

500 508.0 537 24 121 346 43630 5.68

600 609.6 638 24 121 397 43650 6.64

Note: Supplied with 4 nuts – can be used as grip or non-grip type. Add + 3mm to ‘C’ dimension for non-grip type.

63

Standard Components Forged Clevis: Type RC1

Specify: ‘D’ Thread

D THRD

A B C E F G H J L

MAX LOAD

(N) 340ºC

WT KG

M10 30 38 10 95 32 10 12 38 55 3725 0.92

M12 30 38 10 95 32 12 14 38 55 5495 0.97

M16 30 38 10 95 32 16 18 38 55 10200 1.06

M20 30 63 10 102 32 20 22 50 65 15990 1.61

M24 38 76 12 127 32 24 26 58 80 23150 2.72

M30 38 76 12 127 32 30 32 58 80 36785 3.06

M36 44 89 12 152 41 36 39 80 100 53560 4.87

M42 50 102 12 152 44 42 45 90 110 73380 7.3

M48 64 127 16 178 57 48 51 102 140 96335 7.5

M56 76 152 19 203 70 56 60 127 165 133025 12.2

M64 76 152 19 203 70 64 68 127 165 175600 15.7

M72 76 152 19 203 70 72 76 127 170 223080 19.8

64

Forged Weldless Eye: Type RC2

Specify: ‘D’ Thread

D THRD

A B

DIA C

DIA E F G

MAX LOAD

(N) 340ºC

WEIGHT KG

M10 14 7 32 25 64 16 3725 0.3

M12 16 9 38 30 73 18 5495 0.3

M16 20 12 38 30 73 18 10200 0.3

M20 24 14 45 40 102 25 15990 0.3

M24 28 17 50 50 124 28 23150 0.8

M30 34 21 70 75 146 38 36785 1.7

M36 40 26 70 75 146 38 53560 1.7

M42 46 30 80 100 180 45 73375 2.5

M48 90 31 100 70 240 75 96335 3.3

M56 100 36 100 80 270 80 133025 7.5

M64 130 42 130 100 330 80 175600 10.1

M72 130 47 130 100 330 80 223080 17.8

65

Standard Components Forged Turnbuckle: Type RC3

Specify: ‘D’ Dia

D Dia

A MIN.

B C L MAX LOAD

N 340ºC

WEIGHT KG

M10 110 16 32 184 3725 0.19

M12 120 24 35 200 5495 0.39

M16 130 26 40 203 10200 0.49

M20 140 32 50 216 15990 0.82

M24 150 35 67 222 23150 1.45

M30 170 40 75 232 36785 1.7

M36 190 53 90 257 53560 2.5

M42 210 62 100 276 73380 4.1

M48 240 77 108 305 96335

M56 250 83 114 318 133025

M64 260 96 145 343 175600

66

Spherical Washer: Type RC4

Material: Malleable Cast Iron BS1452 Grade 10

ROD DIA.

A B C D R

UNIT WEIGHT

KG

M10 12 14 32 13 0.04

M12 13 16 35 16 0.07

M16 16 19 41 20 0.14

M20 19 24 54 25 0.30

M24 25 32 67 29 0.47

M30 29 35 76 36 0.92

Specify: Rod dia.

67

Standard Components Spherical Cup: Type RC5 (Use with spherical washers RC4)

Material: Maleable cast iron BS 1452 Grade 10 SPECIFY: Rod Dia.

ROD DIA.

A B C D R

UNIT WEIGHT

KG

M10 12 14 32 13 0.04

M12 13 16 35 14 0.07

M16 16 19 41 17 0.14

M20 19 24 54 22 0.30

M24 25 32 67 29 0.47

M30 29 35 76 33 0.92

68

Wrapper Plate: Type PW1

Note: Weld detail to be specified on piping isometric. SPECIFY: Plate material, thickness & length Nom. Pipe size & schedule Weephole (if plate fully welded to pipe) Full encirclement wrapper plates and

Compensation pads designed to ANSI/ASME codes are available to special order.

69

Standard Components Washer Plate: Type PW2

SPECIFY: ‘D’ dia.

B C D

Dia. F H

MAX LOAD (N)

340ºC

WEIGHT KG

80 6 M10 15 12 3725 0.3

80 6 M12 18 14 5495 0.3

80 10 M16 22 18 10200 0.5

100 10 M20 26 22 15990 0.8

100 12 M24 32 26 23150 0.9

100 15 M30 38 32 36785 1.2

130 15 M36 48 40 51560 2.0

130 20 M42 54 46 73380 2.6

130 20 M48 64 52 96335 2.6

150 20 M56 70 60 133025 3.5

200 30 M64 78 68 175600 9.4

200 30 M72 92 76 223080 9.2

250 30 M80 110 84 280565 14.7

300 40 M90 120 94 353160 28.3

300 40 M100 140 104 438505 28.0

70

Base Plate: Type BP1

SPECIFY: Plate SQ ‘A’ & Thickness ‘T’

PLATE SQ ‘A’

PLATE THK ‘T’

MATCHING SECTION

HOLE ‘D’

HOLE CTRS ‘C’

WEIGHT KG

100 10 50 x 50 x 6L 12 60 0.8

150 12 80 x 80 x 8L 14 100 2.1

200 10 100 x 100 x 8L 14 140 3.1

200 12 100 x 100 x 12L 14 140 3.8

250 12 120 x 120 x 10L 14 190 5.9

250 15 120 x 120 x 12L 18 190 7.4

300 15 150 x 150 x 12L 18 230 10.6

300 20 152 x 152 x 23UC 22 230 14.1

350 20 152 x 152 x 30UC 27 270 19.2

400 20 203 x 203 x 46UC 27 320 25.1

450 20 203 x 203 x 52UC 27 350 31.8

550 25 305 x 305 x 97UC 39 430 59.4

600 25 305 x 305 x 118UC 39 480 70.6

71

Standard Components Standard Pipe Hanger Assembly: Type H Design Guide 1. Select the required assembly configuration from the options opposite the code thus:

H D B E

Assembly Type Upper attachment type

Connection Lower attachment type

2. Specify the rod size, pipe size and pipe clip series, e.g. HDBE – heavy, Rod M20 Pipe 80 NB 3. Specify Steel (elevation 1), pipe (elevation 2) and turnbuckle position (elevation 3 if required). 4. See MAINEPORT LTD catalogue for component details listed below.

COMPONENT DESCRIPTION

TYPE REF.

PAGE ATTACHMENT DETAIL U = UPPER L = LOWER

Pipe Clamp – 2 bolt PC1/PC2 48 LA, LB Pipe Clamp – 3 bolt PC3/PC4 50 LC, LD Beam Attachment BA1 54 UA, UB Beam Attachment 2 BA2 55 UC Tie Rod HT 56 UA, UC-UF, LA, LC, LE, LF Eye Rod HI 56 UB, LB, LD Elbow Lug LE 57 LE Welding Lug LW 58 UE Long Welding Lug LLW 59 LF Clevis RC1 62 UE, LE, LF Weldless Eye RC2 63 UA, LA, LC Turnbuckle RC3 64 Connection Washer Plate PW2 68 UD Hexagon Nut - - UA, UC-UF, LA, LC, LE, LF

72

UPPER ATTACHMENTS

LOWER ATTACHMENTS

1 Type H_ _ _ Std Heavy

A ROD B PIPE EL.1 EL.2 EL.3 ITEM CODE ASSEMBLY CODE

DIMENSION

DRG No.

STANDARD PIPE HANGER ASSEMBLY TYPE H

MARK No.

QTY

Standard Pipe Supports

Documents

Transcript of Standard Pipe Supports