STANDARD Part 10.02.01 Seals with seat face ring for ...
Transcript of STANDARD Part 10.02.01 Seals with seat face ring for ...
Printouts, if any, are not controlled. Printed on: 12.1.2017
Mondi Štětí a.s.
STANDARD
Part 10.02.01
Seals with seat face ring for centrifugal pumps
Mondi Štětí a.s. STANDARD 10.02.01 Page: 1/8
Version: 02 Valid from: As of the date of issue
Printouts, if any, are not controlled. Printed on: 12.1.2017
STANDARD
Part 10.02.01
Seals with seat face ring for centrifugal pumps
Worked out by: Verified by: Approved by: Name: Ing. S. Ryšan Name: Ing. H. Procházková Name: Bc. M. Pešta Position: Head of servise Position: IMS Coordinator Position: Head of of paper machines Maintenance Dpt. Signed by: Ing. S. Ryšan Signed by: Ing. H. Procházková, Signed by: Bc. M. Pešta, in her own hand in her own hand in his own hand
Mondi Štětí a.s. STANDARD 10.02.01 Page: 2/8
Version: 00
Printouts, if any, are not controlled. Printed on: 12.1.2017
TABLE OF CONTENTS Page 1 Principles ........................................................................................................... 3
2 Seals with seal face rings for centrifugal pumps ........................................... 3
2.1 Usage criteria ............................................................................................... 3
Mondi Štětí a.s. STANDARD 10.02.01 Page: 3/8
Version: 00
Printouts, if any, are not controlled. Printed on: 12.1.2017
1 Principles
As long it is possible from the point of economy or technology, the pumps with hydro mechanical seals are used.
2 Seals with seal face rings for centrifugal pumps
2.1 Usage criteria Mechanical seals of renowned suppliers, JohnCrane, Metso, Chesterson choice according to the application on the basis of the recommendations of the manufacturer. For the correct function of the mechanical seal must be cooling water in the required quality and quantity. Functionality of cooling water recommended install under control system. For production pumps we prefer SULZER products equipped with mechanical seals JohnCrane.
Mondi Štětí a.s. STANDARD 10.02.01 Page: 4/8
Version: 00
Printouts, if any, are not controlled. Printed on: 12.1.2017
Mondi Štětí a.s. STANDARD 10.02.01 Page: 5/8
Version: 00
Printouts, if any, are not controlled. Printed on: 12.1.2017
Mondi Štětí a.s. STANDARD 10.02.01 Page: 6/8
Version: 00
Printouts, if any, are not controlled. Printed on: 12.1.2017
Mondi Štětí a.s. STANDARD 10.02.01 Page: 7/8
Version: 00
Printouts, if any, are not controlled. Printed on: 12.1.2017