STANDARD FEATURES - Champion Industries · STANDARD FEATURES DH5000-VHR DH5000-VHR HOOD-TYPE •...
2
8/16 Printed in U.S.A. High Temperature Hood-type Dishwashing Machine DH5000-VHR DH5000-VHR HOOD-TYPE STANDARD FEATURES • NEW Factory authorized startup • ENERGY STAR® Qualified • Exclusive cold water feed only! • NEW Exclusive Built-in 70° Rise booster configured • New Dry Assist – Speeds normal drying process • Rinse Sentry – ensures 180°F final rinse • Auto start – starts unit when hood is closed • Single point electrical connection • High efficiency 1 HP pump • Up to 37 racks per hour • Self draining pump • Automatic tank fill • Detergent/chemical connections • Interchangeable upper and lower spray arm • Automatic drain valve – drains wash tank when power is off • Vent fan control • Bottom mounted digital controls • PRV (Pressure Reducing Valve) • Sloped hood keeps hot vapors away from operator • Standard and Heavy Duty wash cycles SPECIFIER STATEMENT Specified unit will be Champion model DH5000-VHR high temperature hood-type dishwashing machine. Features sloped hood, electronic controls, Rinse Sentry, Auto start, interchangeable stainless steel wash and rinse arms, up to 53 racks/hr., .83 US gals/rack. 1 year parts and labor warranty. Champion Industries, Inc. 3765 Champion Blvd., Winston-Salem, NC 27105 Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com Project Item No. Quantity OPTIONS & ACCESSORIES : Drain Water Tempering Kit : Door interlock – locks door closed during the vent fan cycle : Racks : Peg : Flat : : NEW Champion ION scale prevention system Ventless Heat Recovery Condensate Removal Champion, an Ali Group Company
-
Upload
truonglien -
Category
Documents
-
view
216 -
download
0
Transcript of STANDARD FEATURES - Champion Industries · STANDARD FEATURES DH5000-VHR DH5000-VHR HOOD-TYPE •...
8/16 Printed in U.S.A.
High Temperature Hood-type Dishwashing Machine
DH5000-VHR
DH
5000-VH
R HO
OD
-TYPE
STANDARD FEATURES• NEW Factory authorized startup• ENERGY STAR® Qualified• Exclusive cold water feed only!
• NEW Exclusive Built-in 70° Rise booster configured
• New Dry Assist – Speeds normal drying process
• Rinse Sentry – ensures 180°F final rinse
• Auto start – starts unit when hood is closed
• Single point electrical connection
• High efficiency 1 HP pump
• Up to 37 racks per hour
• Self draining pump
• Automatic tank fill
• Detergent/chemical connections
• Interchangeable upper and lower spray arm
• Automatic drain valve – drains wash tank when power is off
• Vent fan control
• Bottom mounted digital controls
• PRV (Pressure Reducing Valve)
• Sloped hood keeps hot vapors away from operator
• Standard and Heavy Duty wash cycles
SPECIFIER STATEMENTSpecified unit will be Champion model DH5000-VHR high temperature hood-type dishwashing machine.Features sloped hood, electronic controls, Rinse Sentry, Auto start, interchangeable stainless steel wash and rinse arms, up to 53 racks/hr., .83 US gals/rack. 1 year parts and labor warranty.
Champion Industries, Inc. 3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com
ProjectItem No.Quantity
OPTIONS & ACCESSORIES : Drain Water Tempering Kit
: Door interlock – locks door closed during the vent fan cycle
: Racks
: Peg
: Flat
:: NEW Champion ION scale prevention system
Ventless Heat Recovery
Condensate Removal
Champion, an Ali Group Company
Typical Table Construction
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
Corner Configuration
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
High Temperature Hood-type Dishwashing Machine
DH5000-VHR
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.Champion Industries, Inc., 3765 Champion Blvd., NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Shipping weight crated: 350 lbs. Dimensions shown in inches and [mm]
Warning: Plumbing, electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary and safety codes and the National Electrical Code.
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
Machine and Built-in 70°F Rise Booster
VoltageRated Amps
Minimum Supply Ckt. Conductor Ampacity
Maximum Overcurrent Protective
Device208/60/1 79 100 100240/60/1 90 100 100208/60/3 48 60 60240/60/3 54 60 60480/60/3 22 25 25
SPECIFICATIONSCapacities Racks per hr. 37 Wash tank (gal.) 9.5
Motor horsepower 1 HPWater consumption Gal. per hr. (max. use) 30.7 Gal. per rack 0.83
Temperature °F Wash 150 Rinse 180
Heating Tank heat, electric 5.2 kW Electric Booster 10 kW
Time cycle in seconds Standard Extended
Wash 35 65 Rinse 10 10 Sanitary Dwell 15 15
Vent Fan 30 30 Total cycle 90 120
Utilities 1 Electrical
Machine Connection (See Electrical Box)
3 Drain 2" OD Connection 15 GPM max flow
4 Cold Water 3/4" NPT Cold Water from 50°F to 80°F40-45 PSI Flow pressure (machine operates at 20)
VENTLESS/HEAT RECOVERY/CONDENSATE REMOVALRemoves heat and water vapor at the end of the cycle while recovering the normally exhausted heat and transferring it to the required 70°F riser. No vent hood required.
For standard machine dimensions see DH5000 drawing
44
4
4
2
1
2
1
31
3
1
3 31
3
3
4
4
DH5000 DIRECT VENT
DH5000 CONDENSATE REMOVAL
SIDE VIEWFRONT VIEW
SIDE VIEWFRONT VIEW
PLAN VIEW
Insi
de T
rack
s Rear Track
Front Track Corn
er T
rack
PLAN VIEW
Insi
de T
rack
s Rear Track
Front Track Corn
er T
rack
8-3/8"[214]
From Wall
5-3/4"[146]
13"[329]
5-1/8"[129]
20-1/8"[511]
Inside Tracks
7-5/8"[192]
From Wall
20-1/8"[511]
30"[764]TableTyp
TYPICAL TABLE CONSTRUCTION
[762]30"
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
8-3/8"[214]
From Wall
20-1/8"[511]
30"[764]TableTyp
5-3/4"[146]
5-1/8"[129]
20-1/8"[511]
Inside Tracks
7-5/8"[192]
From Wall
69-3/4"[1770]
33-3/4"[857]
37-7/8"[963] 33-3/4"
[857]
34-1/8"[867]
37-7/8"[963]
18-1/8"[459]
17"[432]
17"[432]
17"[431]
Clearance
17"[431]
Clearance
8-1/8"[206]
Min Ceiling Clearance
1"[25]
78-3/8"[1990]
63"[1600]
69-3/4"[1770]
81-7/8"[2078]
11"[280]
11"[280]
9-1/4"[233]
44-1/8"[1119]
44-1/8"[1119]
4-3/8"[112]
4-3/4"[122]
8-7/8"[225]
8-7/8"[225]
6"[152]
6"[152]19-5/8"
[500]
26-1/8"[663]
19-5/8"[500]
26-1/8"[663]31"
[787]
31"[787]
8-3/4"[221]
8-3/4"[221]8-3/4"
[221]
4-3/4"[122]
2-3/8"[60]
2-3/4"[70]
9-1/4"[233]
Side View
Plan View
Front View
44
4
4
2
1
2
1
31
3
1
3 31
3
3
4
4
DH5000 DIRECT VENT
DH5000 CONDENSATE REMOVAL
SIDE VIEWFRONT VIEW
SIDE VIEWFRONT VIEW
PLAN VIEW
Insi
de T
rack
s Rear Track
Front Track Corn
er T
rack
PLAN VIEW
Insi
de T
rack
s Rear Track
Front Track Corn
er T
rack
8-3/8"[214]
From Wall
5-3/4"[146]
13"[329]
5-1/8"[129]
20-1/8"[511]
Inside Tracks
7-5/8"[192]
From Wall
20-1/8"[511]
30"[764]TableTyp
TYPICAL TABLE CONSTRUCTION
[762]30"
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
8-3/8"[214]
From Wall
20-1/8"[511]
30"[764]TableTyp
5-3/4"[146]
5-1/8"[129]
20-1/8"[511]
Inside Tracks
7-5/8"[192]
From Wall
69-3/4"[1770]
33-3/4"[857]
37-7/8"[963] 33-3/4"
[857]
34-1/8"[867]
37-7/8"[963]
18-1/8"[459]
17"[432]
17"[432]
17"[431]
Clearance
17"[431]
Clearance
8-1/8"[206]
Min Ceiling Clearance
1"[25]
78-3/8"[1990]
63"[1600]
69-3/4"[1770]
81-7/8"[2078]
11"[280]
11"[280]
9-1/4"[233]
44-1/8"[1119]
44-1/8"[1119]
4-3/8"[112]
4-3/4"[122]
8-7/8"[225]
8-7/8"[225]
6"[152]
6"[152]19-5/8"
[500]
26-1/8"[663]
19-5/8"[500]
26-1/8"[663]31"
[787]
31"[787]
8-3/4"[221]
8-3/4"[221]8-3/4"
[221]
4-3/4"[122]
2-3/8"[60]
2-3/4"[70]
9-1/4"[233]
