STANDARD ARCHITECTURAL BASES - Akron Foundry · PDF fileSTANDARD ARCHITECTURAL BASES ROUND...
-
Upload
nguyenkhanh -
Category
Documents
-
view
241 -
download
4
Transcript of STANDARD ARCHITECTURAL BASES - Akron Foundry · PDF fileSTANDARD ARCHITECTURAL BASES ROUND...
STANDARD ARCHITECTURAL BASES
ANCHOR BASES Available for smaller poles of 3”, 4” & 5” diameters. Bases accommodate ¾” diameter anchor bolts and are stainless steel shot blasted for uniform color and finish.
Product Part No.
Job Number
Weight Anchor
Bolt (dia.) Bolt
Circle Description
AB-3 7332 2.0 lbs. 3/4” 6” 3” Base - ¾” Bolts
AB-4 7333 3.34 lbs. 3/4” 7” 4” Base - ¾” Bolts
AB-5 7334 3.62 lbs. 3/4” 7½” 5” Base - ¾” Bolts
HEAVY DUTY ANCHOR BASES Product Part No.
Job Number
Weight Anchor
Bolt (dia.) Bolt
Circle Description
AB-8-S 2240-S 11.9 lbs. 1-1¼” 11-14” 8” HD Anchor Base / 8.040 Bore
AB-8-T 2240-T 10.7 lbs. 1-1¼” 11-14” 8” HD Anchor Base / 8” Tapered Core
AB-10-S 2159-S 19.0 lbs. 1¼” 14-15” 10” HD Anchor Base / 10.045 Bore
AB-10-T 2159-T 17.1 lbs. 1¼” 14-15” 10” HD Anchor Base / 10” Tapered Core
AF-12 2267 45.0 lbs. 1½” 17½-18½” 12” HD Anchor Base / 12” Tapered Core
AB 8-10 2242 .38 lbs. - - AB 8-10” Bolt Cover
AF-12-BC 8383 .78 lbs. - - Bolt Cover for AF-12 Base
ANCHOR BASES - 1992
Available for pole sizes 6” through 12” in diameter. All 10” bases are available for 1” or 1¼” anchor-age in either a straight bore or a tapered as cast I.D. All bases are drilled and tapped for ¼”-20 N.C. to accept the appropriate bolt covers. (4 covers per base) All bases are stainless steel shot blasted for uniform color and finish.
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
AF-5 8051 5.0 lbs. 1” 8-9” 5” Anchor Base / 5.03 Cast
6”-1992-5 8203-5 9.31 lbs. 1” 9-10” 6” Anchor Base / 5.040 Bore
6”-1992 8203 5.80 lbs. 1” 9-10” 6” Anchor Base / 6.040 Bore
7”-1992 2263 7.86 lbs. 1” 10-11” 7” Anchor Base / 7.040 Bore
8”-1992-S 2264-S 8.59 lbs. 1¼” 11-12” 8” Anchor Base / 8.040 Bore
8”-1992-T 2264-T 7.77 lbs. 1¼” 11-12” 8” Anchor Base / Tapered Core
8”-1992-7 2264-7” 12.56 lbs. 1¼” 11-12” 8” Anchor Base / 7.040 Bore
9”-1999-S 2367-S 10.05 lbs. 1¼” 12.5-14” 9” Anchor Base / 9.040 Bore
9”-1999-T 2367-T 8.50 lbs. 1¼” 12.5-14” 9” Anchor Base / Tapered Core
6-7-8-1992 8164 .31 lbs. - - 6”-7”-8”-1992 Base Bolt Cover
8”-1995-16 8455 21.88 lbs. 1½” 15-16½ 8” Anchor Base / 8.040 Bore
10”-1992-S-1 8204-S-1 16.6 lbs. 1” 13-15” 10” Anchor Base / 10.045 Bore
10”-1992-S-2 8204-S-2 16.29 lbs. 1¼” 13-15” 10” Anchor Base / 10.045 Bore
10”-1992-T-1 8204-T-1 12.95 lbs. 1” 13-15” 10” Anchor Base / Tapered Core
10”-1992-T-2 8204-T-2 12.66 lbs. 1¼” 13-15” 10” Anchor Base / Tapered Core
10”-1992-C 8222 .50 lbs. - - 10” Anchor Base Bolt Cover
ARCHITECTURAL HINGED BASES & COVERS
SQUARE BASES (without half cover castings)
Available for pole diameters 3” through 5”. All square bases are heat treated to a T6 condition for ultimate strength and reliability. Half covers are also available. (see below)
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
Half Cover
395-SQ 2285-B 4.48 lbs. 3/4” dia. 8-9½” 3” SQ. BASE Optional
* ALL INSIDE SQUARES ARE DIE SIZED .03” OVER NOMINAL +.030 / - 0.000
SQUARE BASE HALF COVERS
When ordering half covers they are shipped as a set of two (2), with four (4) ¼ - 20 U.N.C. x ½ LG. Stainless Steel Flat Head Hex-Socket Vandal Cap Screws
Product Part No.
Job Number
Approximate Wt. (ea. half)
Base Cover Inside Size
Description
395-SQ-C 2285-C 1.48 LBS 9 1/8” x 2 1/2” 3” SQ. HALF COVER
ROUND HINGED BASES (without half cover castings)
Available for pole diameters 3” through 5”. All round bases are heat treated to a T6 condition for ultimate strength and reliability. Half covers are also available. (see below)
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
Half Cover
395-RD-HB 2290-HB 5.24 lbs. 3/4” dia. 7” dia. 3” Hinged Base Optional
495-RD-HB 2291-HB 4.91 lbs. 3/4” dia. 7” dia. 4” Hinged Base Optional
595-RD-HB 2292-HB 6.48 lbs. 3/4” dia. 8½” dia. 5” Hinged Base Optional
* ALL DIAMETERS ARE BORED .03” OVER NOMINAL +.030 / - 0.000
ROUND BASE HALF COVERS
When ordering half covers they are shipped as a set of two (2), with four (4) ¼ - 20 U.N.C. x ½ LG. Stainless Steel Flat Head Hex-Socket Vandal Cap Screws
Product Part No.
Job Number
Approximate Wt. (ea. half)
Base Cover Inside Size
Description
395-RD-C 2290-C 1.29 lbs. 9 3/8” x 2 1/2” 3” RD. HALF COVER
495-RD-C 2291-C 1.25 lbs. 9 3/8” x 2 1/2” 4” RD. HALF COVER
595-RD-C 2292-C 1.52 lbs. 10 7/8” x 2 1/2” 5” RD. HALF COVER
HINGED BASES
Available to accommodate both round and square poles, sizes 4” through 6”. This two piece design base is shipped completely assembled and swings a full 90°. In addition the base comes standard with stainless steel hardware, and is held in a vertical position by (3) ½ - 13 x 3” S.S. countersunk allen head bolts. Castings are stainless steel shot blasted for uniform surface finish and color. Product
Part No. Job
Number Weight
Anchor Bolt Size
Bolt Circle
Description
4SQ-2728-H 1045 12.10 lbs. 5/8” - 3/4 “ 7½ - 9” 4” SQ HINGED BASE
4RD-2728-H 1046 12.2 lbs. 5/8” - 3/4 “ 7½ - 9” 4” RD HINGED BASE
5SQ-2728-H 1047 11.94 lbs. 5/8” - 3/4 “ 9” 5” SQ HINGED BASE
5RD-2728-H 1048 11.69 lbs. 5/8” - 3/4 “ 7½ - 9” 5” RD HINGED BASE
6RD-2728-H 1049 11.25 lbs. 5/8” - 3/4 “ 8½ - 9” 6” RD HINGED BASE
MANUFACTURED IN THE U.S.A BY:
AKRON FOUNDRY COMPANY
2728 Wingate Ave. Akron, Ohio 44314 Phone: (330) 745-3101 Fax: (330) 745-7999 Email: [email protected] Website: www.akronfoundry.com
STANDARD ARCHITECTURAL BASES ROUND BASES
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
Cover Size
4-2728-R 7134 4.03 lbs. 3/4” dia. 6¾” 4” RD. BASE “A”
4.5-2728-R 7135 5.07 lbs. 3/4” dia. 7¾” 4½” RD. BASE “A”
5-2728-R 7136 4.74 lbs. 3/4” dia. 7¾” 5” RD. BASE “A”
6-2728-R 7137 4.97 lbs. 3/4” dia. 8¾” 6” RD. BASE “A”
* All round bases listed above require four (4) size “A” vandal resistant covers.
SQUARE BASES (FIXED)
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
Cover Size
4-2728 1043 4.23 lbs. 3/4” dia. 8½” 4” SQ. BASE “A”
5-2728 2269 6.98 lbs. 3/4” dia. 10½” 5” SQ. BASE “A”
6-2728 2270 10.15 lbs. 1” dia. 12” 6” SQ. BASE “C”
SQUARE BASES (SLOTTED)
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
Cover Size
4-2728-S 6585 6.17 lbs. 3/4” dia. 8½ - 9½” 4” SQ. BASE “B”
5-2728-S 6586 8.55 lbs. 3/4” dia. 10¾ - 11½” 5” SQ. BASE “B”
6-2728-S 6587 12.2 lbs. 1” dia. 12-13” 6” SQ. BASE “D”
6.65-2728-S 8201 14.62 lbs. 1” dia. 12-13” 6.65” SQ. BASE “D”
* All square bases listed above require four (4) vandal resistant covers.
* All square bases listed above require four (4) vandal resistant covers.
TB-1 - 8” BASES
Size
Job Number
Description
“A” 0941 1.962 dia. Cover
“B’ 0942 2.500 dia. Cover
“C” 0943 2.375 dia. Cover
“D” 0944 2.875 dia. Cover
Available for pole sizes 4” through 6.65” square. Bases are shipped complete with vandal resistant covers and can be ordered with slotted bolt circle diameters. Counterbores are machined for covers to ensure trouble free installation. Bases are stainless steel shot blasted for uniform surface and color. A special enlarged counter-bore is available for bases requiring painting. (consult factory)
Available for 8” diameter pole sizes, the TB-1 bases may be ordered for use with T - Base mounting (BM) or ground mounting (GM) applications. All bases are stainless steel shot blasted for uniform color and finish. VANDAL RESISTANT COVERS
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
Cover Size
TB1-8”-1 2235-1 13.87 lbs. 1” dia. 13” 8” Base Tapered Core (BM) Hex N/A
TB1-8”-2 2235-2 13.6 lbs. 1” dia. 13” 8” Base Tapered Core (GM) “C”
TB1-8”-3 2235-3 14.2 lbs. 1” dia. 13” 8” Base 8.04 Bore (BM) Hex N/A
TB1-8”-4 2235-4 14.0 lbs. 1” dia. 13” 8” Base 8.04 Bore (GM) “C”
TB3-12” 8876 21.8 lbs. 1¼ dia. 15” 12” Base 12.065 Bore N/A
Bases are shipped complete with vandal resistant covers and can be ordered mac hined with either fixed or slotted bolt circle diameters. Counterbores are machined to ensure trouble free installation. Bases are stainless steel blasted for uniform surface finish and color. A special enlarged counterbore is available for bases requiring painting (Consult Factory)
* When vandal resistant covers are required on painted bases, order –P (PAINTED) after base part number.
PEDESTAL BASES - POLES - CAPS - WASHERS
Available with aluminum or plastic door. If required (3) ⅜-16 N.C. stainless steel set screws.
ROUND PEDESTAL BASES
Product Part No.
Job Number
Weight Anchor
Bolt Size Bolt
Circle Description
TS-6 2355 13.31 lbs. 1” dia. 10½” dia. B.C. 6” Dia. Pedestal Base
SQUARE PEDESTAL BASE Product Part No.
Job Num-ber
Weight Anchor
Bolt Size Bolt
Circle Description
TS-1000 2328 19.67 lbs. ¾ or 1” dia. 12¾ - 15.0 dia. Standard 4” NPT Threaded
Pedestal Base
TS-1000L 2328-L 20.01 lbs. ¾ or 1” dia. 12¾ - 15.0 dia. 4” NPT Threaded Pedestal Base with extended neck
TS-1000 MODIFIED
2331 22.76 lbs ¾ or 1” dia. 8.0 - 15.0 dia. Standard 4” NPT Threaded
Pedestal Base with Modified Base
POLE CAPS
Product Part No.
Job Number
Weight POLE SIZE
Description
P-1000 Domed Cap
8829 .82 lbs. 4.0” dia. 4” Dia. Press Fit Pole Cap
TS-1000 ACORN CAP
8879 1.94 lbs 4.0” dia. 4” Dai. Pole Cap
(with 3 Set Screws)
Caps available with or without set screws.
WASHERS
Product Part No.
Weight Dim. OD x ID X Thickness Description
AF-W8 .305# ea.
2½ dia. X 13/16 ID X .25 Thk. Zinc Mechanical Deposit
Per ASTM B 695-85 Class 50
AF-W9 .275# ea.
2½ dia. X 1 1/16 ID X .25 Thk. Zinc Mechanical Deposit
Per ASTM B 695-85 Class 50
4” THREADED ALUMINUM PIPE
Product Part No. Pole Size Description
2328 X Required Length (0 TO 20” long) 4.5 dia. Schedule 40 4”NPT Threaded
Material: 6061 T6. Uniform brushed satin finish.
AKRON FOUNDRY COMPANY 2728 Wingate Ave. Akron, Ohio 44314 Phone: (330) 745-3101 Fax: (330) 745-7999 E-mail: [email protected] Website: www.akronfoundry.com
MANUFACTURED BY:
MISCELLANEOUS FLAGPOLE COMPONENTS
REVOLVING TRUCKS All truck assemblies are burnished for uniform finish.
Product Part No.
Job Number Weight
Pipe Thread
Size
Rod Mounting
Hole Description Bearing Type
999-1-½-13 8950 1.8 1¼” NPT ½-13 N.C. Single Truck Assembly Chrome Plated Ball Bearings
999-1-⅝-11 8950 1.8 1¼” NPT ⅝-11 N.C. Single Truck Assembly Chrome Plated Ball Bearings
999-2-½-13 8952 2.39 1¼” NPT ½-13 N.C. Double Truck Assembly Chrome Plated Ball Bearings
999-2-⅝-11 8952 2.39 1¼” NPT ⅝-11 N.C. Double Truck Assembly Chrome Plated
Ball Bearing
Product Part No.
Job Number Weight
Pipe Thread
Size
Rod Mounting
Hole Description Bearing Type
8970-½-13 8970 4.5 1 ¼” NPT ½-13 N.C. Internal Revolving Halyard Chromed Plated
Ball Bearings
8970-⅝-11 8970 4.5 1¼” NPT ⅝-11 N.C. Internal Revolving Halyard Chrome Plated Ball Bearings
1 ½” NPT X 1 ¼” NPT REDUCER AVAILABLE: CONSULT FACTORY
Product Part No.
Job Number Weight
Cap Inside
Diameter
Rod Mounting
Hole Description Bearing Type
999-3 8979 1.02 2.50 ½-13 N.C. Stationary Single Truck N/A
STATIONARY SINGLE TRUCK All trucks assemblies burnished for a uniform finish.
Product Part No.
SIZE Job Number
Weight Description
AF5 x .188 3 X 5 8651 .642 lbs. Hand-hole Casting
AF6 x .188 4 X 6.5 8657 .97 lbs. Hand-hole Casting
AF6 x .188 3 X 5 8652 .73 lbs. Hand-hole Casting
AF7 x .188 4 X 7 8653 1.708 lbs. Hand-hole Casting
AF7 x .250 4 x 6 8658 1.81 lbs. Hand-hole Casting
AF8 x .188 4 X 8 8654 1.796 lbs. Hand-hole Casting
AF10 x .250 4 X 8 8655 1.50 lbs. Hand-hole Casting
AF22097 3.5 X 6 8656 .56 LBS. Hand-hole Casting
STANDARD HAND-HOLE CASTINGS
INTERNAL REVOLVING HALYARD WITH BRUSH FINISHED COVER.