Performance Formula Performance Formula®StanadyneStanadyne

STANADYNE DIESEL FUEL ADDITIVES COMPLY WITH FEDERAL LOW SULFUR REQUIREMENTS FOR USE IN DIESEL MOTOR VEHICLES AND NONROAD ENGINES

Diesel Fuel Additive

COLD FILTER PLUG POINT REDUCTIONLower CFPP Temperature is Better

Ranking number in box (1 is Best, 9 is Worst)

CETANE NUMBER CHANGEHigher Cetane Number is Better

Ranking number in box (1 is Best, 9 is Worst)

OVERALL AVERAGE RANKINGRanking number in box (1 is Best, 9 is Worst)

AVERAGE WEAR SCAR (HFRR TEST)Lower Wear Scar Diameter is Better (Less Wear)Ranking number in box (1 is Best, 9 is Worst)

Our PerformanceFormula Additives are:• Developed by a Fuel System Manufacturer• Have been proven to perform best in

independent tests• Are Suitable for use with all diesel

engines• Are formulated for all types of on or

off-road diesel fuels including UltraLow Sulfur Diesel (ULSD) and Bio Diesel(up to B20)

• Can be used with all fuel injectionsystem types (High Pressure CommonRail, Unit Injectors, Rotary Pumps andIn-Line Pumps)

• Safe for use with exhaust Aftertreatmentsystems.

Stanadyne fuel additives are a brand of CLARCOR Engine Mobile Solutions.

Formulated to provide the same benefits as Performance Formula® AllSeason Protection (Blue Label) except without cold weather protection.Performance Formula Warm Weather Blend is recommended when ambienttemperatures are above 40°F (4° C).• Contains Detergents that clean & protect the fuel system from deposits

resulting in increased Horsepower, Torque and Improved Economy• Lubricates fuel system components to help prevent wear caused by

low lubricity fuels• Cetane improver improves combustion resulting in better starting,

running, and reduced engine noise• Demulsifies water for more effective water separation• Corrosion Inhibiters prevents rust/corrosion from forming on fuel

system components• Reduces Smoke and Particulates• Stabilizes fuel by protecting against the formation of gums caused

by oxidation

Size 16 oz Pint 5 Gallons 55 Gallons(473 ml) (19 L) (208 L)

Part Number 38574 38575 38576

Package Quantity 12 1 1

Treatment 125 gal. 5,000 gal. 55,000 gal.(1:1000) (473 L) (19,000 L) (208,000 L)

Size 8 oz 16 oz Pint 64 oz 5 Gallons 55 Gallons(237 ml) (473 ml) (1.9 L) (19 L) (208 L)

Part Number 38559* 38560 38561 38562 38563

Package Quantity 24 12 6 1 1

Treatment 15 gal. 125 gal. 500 gal. 5,000 gal. 55,000 gal.(1:1000) (57 L) (473 L) (1,900 L) (19,000 L) (208,000 L)

*Special formulation ratio for 8 oz. application.

Diesel Fuel Additives

1:10001:500 1:1000

LUBRICITYFORMULA™

PERFORMANCE FORMULA®

ALL SEASON

PERFORMANCE FORMULA®

WARM WEATHERBLEND

WINTER 1000®

FORMULA

•

•••

••

•

•

•••

••

•

•

•

•

•

•

•

••

••

••

•••

•

•

• •

••

Size 8 oz 16 oz Pint 32 oz(237 ml) (473 ml) (946 ml)

Part Number 43562 43564 43566

Package Quantity 24/case 12/case 12/case

Treatment 25 gal. 50 gal. 100 gal.(1:400) (95 L) (189 L) (379 L)

Size 8 oz 16 oz Pint 64 oz 5 Gallons 55 Gallons(237 ml) (473 ml) (1.9 L) (19 L) (208 L)

Part Number 43568 43570 43572 43574 43573

Package Quantity 24/case 12/case 6/case 1 1

Treatment 30 gal. 60 gal. 250 gal. 2,500 gal. 27,500 gal.(1:500) (114 L) (227 L) (946 L) (9,500 L) (104,000 L)

1:400

PERFORMANCE FORMULA®

INJECTORCLEANER

•

••

••

•

•

••

1:500

•

•

Performance Formula®

Warm Weather Blend Performance Formula®

Injector Cleaner

Lubricity Formula®

Winter 1000®

Performance Formula® Injector Cleaner is formulated to preventand eliminate Internal Diesel Injector Deposits (IDID) commonlyfound in Common Rail and other type of Injectors. These depositsaffect injector performance, which results in various engine related issues.Performance Formula Injector Cleaner is a “One Tank” Clean-Upof concentrated detergents designed to eliminate & prevent internal and external deposits from forming on injectors. Theresult is restored Engine Performance, Increased Horsepower, and Improved Fuel Economy.Other benefits and recommendations:• Lubricates fuel system components to help prevent wear• Cetane improver improves combustion resulting in better

starting, smoother running, and reduced engine noise• Cleans and protects injectors and all fuel systems components• Use 4 – 6 times per year as preventive maintenance or when

engine performance issues arise

Extra strength lubricity improver for use with very dry or “winterblend” fuels such as, jet fuel, kerosene or #1 diesel.• Five times more lubricating content than other Stanadyne

additives• Recommended when excessive wear is a problem• Demulsifies water for filter/separator efficiency• Fights formation of corrosion and rust• Keeps fuel fresher• Contains no alcohol

Economic cold weather protection• Fuel Gelling Protection – pour point reduced by as much as

40°F (22°C), depending on base fuel• Reduces ice formation of water in fuel• Contains no alcohol

Approved by Original Equipment Manufacturers (OEMs)

Cetane ImproverImproves combustion, reduces emissions, faster start-ups,smoother idling and acceleration

DetergentCleans existing deposits and prevents additional build-up

Deposit ModifierSoftens hard deposits allowing for their removal. ExceedsCummins L10 test for cleanliness

LubricantCoats internal parts of fuel system to allow better fuel flowand less friction

Corrosion InhibitorProtects fuel injection parts from rust and corrosion

Water DemulsifierCauses water to come out of emulsion/suspension soFilter/Separator can remove it

StabilizerFights formation of gums caused by oxidation

Alcohol-FreeAvoids harmful corrosion and accelerated wear caused byalcohol use

Wax Modifier - Pour Point DepressantLowers temperature at which fuel will pour by up to40°F (22°C)

Wax DispersantKeeps wax crystals evenly distributed

Freeze DepressantLowers freeze-point of water in fuel

Highly Concentrated LubricantFor use in fuels with reduced lubricating properties

Compatible with all Diesel FuelsFor use with ultra low sulfur diesel and bio diesel (up to B20, or 20% bio content)

Treatment Ratio

•

PPeerrffoorrmmaannccee wwiitthh SSaavviinnggssStanadyne Gasoline Additive+ will improve yourengine’s performance and fuel economy. It achievesthis by using a unique combination of specially formulated additives that clean the fuel injection system while simultaneously providing friction modifiers which coats engine cylinders, piston ringsand other vital parts to reduce the amount of friction generated during operation. The reduced frictionallows the engine to run cooler and more efficiently.The net result is more horsepower, torque andincreased economy. Regular use of StanadyneGasoline Additive+ more than pays for itself.

Testing has shown average fuel economy improve-ments of 2.5% and in some cases as high as 15%.Testing confirms that the advanced cleaning compounds in the Gasoline Additive+ prevents and eliminates deposits commonly found on intakevalves and fuel system components. This combinationof additive technology restores your engine to its optimum performance.

Protect Your InvestmentRun Cleaner, Improve Fuel Economy

and Engine Performance

RReemmeemmbbeerr .. .. ..Our Gasoline Additive is:

• Developed by a Fuel System Manufacturerand;

• Has been proven to perform best inindependent tests and;

• Suitable for use with all gasoline enginesand;

• Formulated for use with up to E15 fuelsand;

• Suitable for use with all fuel injectionsystem types and;

• Safe for use with exhaust CatalyticConverter systems.

Restores and helpsImprove Fuel Economy

Helps RemoveWater from Fuel

Ethanol Protection

Friction Modifiers toreduce Engine Friction

Prevents Rust/Corrosion of the Fuel System

Detergents that removeVarnish & Deposits from Fuel System

Reduces Emissions

Formulated for use withup to E15 Fuels

Restores EngineHorsepower & Torque

Fuel Stabilizer

Improves Combustion

GGaassoolliinneeAAddddiittiivvee ++

•

•

•• •

•

•

•

•••

•Removes Deposits fromIntake Valves

Stanadyne fuel additives are a brand of CLARCOR Engine Mobile Solutions.

As a manufacturer of fuel injection equipment for over 50 years, Stanadyne has experience with the effects fuel related issues can have on the fuel injection system and the resultant

issues affecting engine performance. Stanadynedeveloped a gasoline additiveto address these and otherissues for all applications and operating conditions.Stanadyne GasolineAdditive+ is formulated torestore and improve the performance of your engine.

The benefits include:• Detergents to clean & protect the fuel

system from gummy deposits

• Reduces and preventsharmful deposits in thecombustion chamber andintake valves resulting inincreased horsepowerand torque

• Friction modifiers toreduce piston andpiston ring friction inupper cylinder arearesulting in betterengine efficiency

• Helps reduce smokeand particulates

• Helps improve engine drivability byreducing/eliminating: surging, hesitation,stalling and rough idling

In terms of protection, Stanadyne GasolineAdditive+ provides the ultimate in protectionfrom fuel breakdown. Today’s fuels tend to bemore corrosive, retain moisture and with themajority of fuels containing ethanol, thefuel will break down creating gums and varnishes that are harmfulto traditional fuel systemssuch as carburetor, multiport injection as wellas today’s Gasoline Direct Injection Systems.Stanadyne Gasoline Additive+will provide the following protectionto all gasolineengines big andsmall:

• Ethanol protec-tion for up toE15 type fuels

• Fuel Stabilizer

• Rust and Corrosion Protection

• Helps gasoline resist breakdown whenexposed to air, oxygen or heat

• Reduces oxidation

• Water removal characteristics

Stanadyne Gasoline Additive+ was developedto not only improve engine performance butalso to improve and restore engine fuel economy.Testing shows that over manyyears of driving, the fuel economy of your engine isreduced due to inconsistencywith today’s fuels, normalwear and tear of the engineand the build-up of harmfuldeposits and sludges withinthe combustion chamber, which affect the overall efficiency of the engine.Stanadyne Gasoline Additive + has the necessary detergents to clean sludge and harmful deposits, and with regular use ofGasoline Additive+, the build-up of depositswill be virtually eliminated allowing your engine to run at itspeak efficiency.Although this additive was developed specifically forGasoline DirectInjection (GDI) systems, it is alsoideal for traditionalfuel systems andsmall four strokeengines used inrecreational/utilitytype vehicles.

Performance Economy Protection

PartNumber

Description Size Treatment

38557 Gasoline Additive 8 oz. (237 ml) 18 gal. (68 L)

Before

After

PPeerrffoorrmmaannccee FFoorrmmuullaa ®

PPeerrffoorrmmaannccee wwiitthh SSaavviinnggssPerformance Formula®, as it name implies, improvesengine performance and fuel economy. It achieves thisby the detergents in the chemistry that clean the fuelinjection system along with the cetane improver, whichresults in easier starting, less smoke and more com-plete combustion. The net result is more horsepower,torque and increased economy. Regular use ofStanadyne Performance Formula will more than pay for itself.

Independent testing of school bus fleets have shownfuel economy improvements of 4% to as high as 9.6%with regular use of Performance Formula. Also, testinghas shown that loss of engine horsepower, torque, andfuel economy caused by IDID can be restored back tooriginal factory specifications by using PF InjectorCleaner on a periodic basis.

Protect Your InvestmentRun Cleaner, Improve Fuel Economy and

Engine Performance with Performance Formula Additives

RReemmeemmbbeerr .. .. ..Our Performance Formula Additivesare:

• Developed by a Fuel System Manufacturerand;

• Have been proven to perform best inindependent tests and;

• Are Suitable for use with all diesel enginesand;

• Are formulated for all types of on or off- roaddiesel fuels including Ultra Low Sulfur Diesel(ULSD) and Bio Diesel (up to B20) and;

• Can be used with all fuel injection systemtypes (High Pressure Common Rail, UnitInjectors, Rotary Pumps and In-Line Pumps)and;

• Safe for use with exhaust Aftertreatmentsystems.Restores and helps

Improve FuelEconomy

Helps RemoveWater from Fuel

Cold WeatherProtection

Lubricity Improversto reduce Fuel

System Wear

PreventsRust/Corrosion of

the Fuel System

Detergents that removeVarnish & Deposits fromFuel System

Reduces Smoke andParticulates

Formulated for use withup to B20 Bio Fuels

Restores EngineHorsepower & Torque

Stabilizes Fuel

Cetane Improver forImproved Combustion

DDiieesseell FFuueell AAddddiittiivveess

•

•

•• •

•

•

•

•••

Stanadyne fuel additives are a brand of CLARCOR Engine Mobile Solutions.

As a manufacturer of diesel fuelinjection equipment for over 50years, Stanadyne is familiar withfuel related issues and theeffects they can have on the fuel injection system of theengine and subsequent engineperformance issues.

The family of StanadynePerformance Formula® dieselfuel additives are designed toaddress these and other issuesfor all climates and operatingconditions.

Performance Formula® “AllSeason Protection” is formulatedfor year round protection wherethe seasonality of warm andcold weather is present.

The benefits include:

• Detergents to clean & protect the fuel systemfrom deposits resulting in increasedHorsepower, Torque and Improved Economy

• Lubricates fuel system components to helpprevent wear caused by low lubricity fuels

• Cetane improver to improve combustionresulting in better starting, running and reducedengine noise

• Helps demulsify water so that the waterseparator can work more effectively

• Corrosion Inhibiters to prevent rust/corrosionfrom forming on fuel system components

• Reduces Smoke and Particulates• Stabilizes fuel by protecting against the

formation of gums caused by oxidation• Provides cold weather protection by reducing

the fuel pour point by up to 40° F (22 °C)*

Performance Formula InjectorCleaner is formulated to preventand eliminate Internal DieselInjector Deposits (IDID) commonly found in CommonRail and other type of Injectors.These deposits affect injectorperformance, which results invarious engine related issues.

Performance Formula InjectorCleaner is a “One Tank” Clean-Up of concentrated detergentsdesigned to eliminate & preventinternal and external depositsfrom forming on injectors. Theresult is restored EnginePerformance, IncreasedHorsepower, and Improved FuelEconomy.

Other benefits and recommendations:

• Lubricates fuel system components to helpprevent wear caused by low lubricity fuels

• Cetane improver to improve combustionresulting in better starting, smoother runningand reduced engine noise

• Use 4 - 6 times per year as preventivemaintenance or when engine performanceissues arise

Performance Formula “WarmWeather Blend“ is formulatedto provide the same benefits asPerformance Formula AllSeason Protection (Blue Label)except it does not provide thecold weather protection. PerformanceFormula Warm Weather Blendshould be used wheneverambient temperatures areabove 40°F (4° C). Remember.... to achieve maximum benefits, Additivesshould be used all year, not justduring the cold winter months.For ultimate warm weather protection against fuel relatedissues , use PerformanceFormula Warm Weather Blend.

Performance Formula®

All SeasonPerformance Formula®

Warm WeatherPerformance Formula®

Injector Cleaner

PartNumber Description Size Treatment

1:50038564

38565

38566

38567

43568

43570

43572

43574

43573

Warm Weather

All Season 8 oz. (237 ml)

16 oz. (473 ml)

27,500 gal. (104,000 L)

64 oz. (1.9 L)

5 gal. (19 L)

30 gal. (114 L)

60 gal. (227 L)

250 gal. (946 L)

2,500 gal. (9,500 L)

55 gal. (208 L)

*Note: Cold weather protection only available inPerformance Formula All Season

PartNumber Description Size Treatment

1:40043562 Injector Cleaner 8 oz. (237 ml) 25 gal. (95 L)

43564

43566

Injector Cleaner

Injector Cleaner

38568

All Season

All Season

All Season

All Season

Warm Weather

Warm Weather

Warm Weather

Warm Weather

8 oz. (237 ml)

16 oz. (473 ml)

64 oz. (1.9 L)

5 gal. (19 L)

55 gal. (208 L) 27,500 gal. (104,000 L)

30 gal. (114 L)

60 gal. (227 L)

250 gal. (946 L)

2,500 gal. (9,500 L) 16 oz. (473 ml)

32 oz. (946 ml)

50 gal. (189 L)

100 gal. (379 L)