Sta in less Stee l T i tan ium Al loyed TubingMetr ic S izes

www.swagelok.com

Seamless Tubing 3 to 25 mm OD 316L stainless steel titanium alloyed DIN 17458

Standards

Steel Grades and Chemical Composition Percentages

AISI UNS SS

2350316L (modified) S31635AFNOR W.-NR.

Z6CNDT17-12 1.4571

C Cr

0.05

Ni Mo Ti

17 12 2.1 0.25 to 0.80

DIN TC

17458 1

Safe Product SelectionWhen selecting a product, the total system design mustbe considered to ensure safe, trouble-free performance.Function, material compatibility, adequate ratings,proper installation, operation, and maintenance are theresponsibilities of the system designer and user.

Ordering Information

Tools and AccessoriesSee the Swagelok Tools and Accessoriescatalog for more information.

Tube deburringtool

Tube cutter

Tube bender

Tube sawingguide

Supportsystem

Nominal ODmm

320

Nominal WallThickness, mm Ordering Number

Weightkg/m

Allowable WorkingPressure, bar

30,5 316TI-T3M-S-0,5M-6ME 0,021 320

61,0 316TI-T6M-S-1,0M-6ME 0,125 430

8316TI-T8M-S-1,0M-6ME 0,175

316TI-T3M-S-0,7M-6ME

316TI-T8M-S-1,5M-6ME

316TI-T6M-S-1,5M-6ME

316TI-T10M-S-1,0M-6ME 0,225 260

0,7

1,0

1,01,5

1,5 316TI-T10M-S-1,5M-6ME

0,027 540

0,169 700

0,244

316TI-T12M-S-1,0M-6ME316TI-T12M-S-1,5M-6ME316TI-T12M-S-2,0M-6ME316TI-T16M-S-1,0M-6ME316TI-T16M-S-1,5M-6ME316TI-T16M-S-2,0M-6ME316TI-T18M-S-1,0M-6ME316TI-T18M-S-1,5M-6ME316TI-T18M-S-2,0M-6ME316TI-T20M-S-2,0M-6ME316TI-T22M-S-2,0M-6ME

1,5

1,01,5

2,01,01,5

2,01,01,5

2,02,02,022

18

100,3190,2750,3940,5000,3750,5070,6510,4250,6190,8010,9011,00

530

420210350490160260360140230320290260

12

16

20

252,02,5 1,41

1,15316TI-T25M-S-2,0M-6ME316TI-T25M-S-2,5M-6ME

230290

Swagelok TM Swagelok Company 1999, 2003 Swagelok CompanyPrinted in U.S.A., GLLMay 2003, R2MS-01-158-SCS

Allowable working pressure based on equations from DIN 2413 and a yield strength of 245 MPa from DIN 17458.

Not recommended for use with Swagelok tube fittings.