26-1-2015Stabilisation the heat is on

Stabilisation: The Heat Is On?

26-1-2015Stabilisation the heat is on

Stabilisation

26-1-2015Stabilisation the heat is on

A high quality Waste Heat Boiler. Two levels.

Optimal heat emission. Done in a jiffy.

• Crude oil often contains dissolved gasses such

as sulphur (H2S) and other gaseous

compounds.

• H2S may corrode storage tanks and the

gaseous substances could even cause them to

explode.

• Therefore, it is essential to stabilise crude oil

first.

• The pressure on the crude oil is reduced and

subsequently the gaseous compounds are

removed in a distillation column.

• The heat required for this process comes from

a reboiler.

• The gaseous mixture that is released can than

be treated further in several ways.

• One option is to burn the mixture and use the

heat to produce steam via waste heat boilers.

• By cooling the combustion gases, it is also

possible to recover the sulphur in the oil in its

solid form.

Stabilisation

26-1-2015Stabilisation the heat is on

A high quality Waste Heat Boiler. Two levels.

Optimal heat emission. Done in a jiffy.

• Crude oil often contains dissolved gasses such

as sulphur (H2S) and other gaseous

compounds.

• H2S may corrode storage tanks and the

gaseous substances could even cause them to

explode.

• Therefore, it is essential to stabilise crude oil

first.

• The pressure on the crude oil is reduced and

subsequently the gaseous compounds are

removed in a distillation column.

• The heat required for this process comes from

a reboiler.

• The gaseous mixture that is released can than

be treated further in several ways.

• One option is to burn the mixture and use the

heat to produce steam via waste heat boilers.

• By cooling the combustion gases, it is also

possible to recover the sulphur in the oil in its

solid form.

Stabilisation: Case Study

26-1-2015Stabilisation the heat is on

Challenge / question

• A client is looking for a special waste heat boiler.

• He would like to use the heat of the combustion gases at a

temperature of 1.200°C.

• The heat must be absorbed in two steps.

• The first step is at a high level where intense cooling of the

tubes must be guaranteed.

• The inlet of the tubes must also be resistant to the high

temperatures.

• In the second step, the hot gasses cool down further to a

lower level where the temperatures on the tube side are less

critical.

Stabilisation: Case Study

26-1-2015Stabilisation the heat is on

Our solution

• To absorb the heat at a high level in the first step,

we use a thermosiphon reboiler which guarantees

extreme cooling of the tubes.

• The clever use of a separator drum placed above

the steamer guarantees a homogenous flow and

temperature around the tubes via several risers

and downcomers.

• The cooling down of the hot flow in the second

step is done by using a standard kettle reboiler.

• The conditioned internal recirculation of this kettle

provides optimal cooling of the hot gasflow.

Stabilisation• Stabilisation is related to the following products:

• Waste Heat Boiler High Temperature: http://www.bronswerk.com/en/Waste-Heat-Boiler-High-

Temperature/PT92/

• Waste Heat Boiler: http://www.bronswerk.com/en/Waste-Heat-Boiler/PT90/

• Sulphur condenser: http://www.bronswerk.com/en/Sulphur-Condenser/PT84/

• Separator: http://www.bronswerk.com/en/Separator/PT78/

• Reboiler: http://www.bronswerk.com/en/Reboiler/PT70/

• Condenser: http://www.bronswerk.com/en/Condenser/PT50/

• Air Cooled Cooler: http://www.bronswerk.com/en/Air-Cooled-Cooler/PT6/

26-1-2015Stabilisation the heat is on

Stabilisation

• Interested?

• Read more about our solutions for the oil industry

• http://www.bronswerk.com/en/Oil-Extraction/PS2/

• http://www.bronswerk.com/en/Oil-Refinery/PS59/

• http://www.bronswerk.com/en/Hydro-Crackers/PS60/

26-1-2015Stabilisation the heat is on

Stabilisation

• Can we help you with your business?

• Ask our colleague nl.linkedin.com/pub/bram-marcus/11/24b/34b or contact

our company.

26-1-2015Stabilisation the heat is on

Stabilisation

26-1-2015Stabilisation the heat is on

• Like to know more our company?

• Have a chat with Bronswerk people via our website or

• Visit our website: http://www.bronswerk.com/en/Solutions/PS64/

• Meet us on LinkedIn.

• https://www.linkedin.com/company/bronswerk-heat-

transfer/products?trk=top_nav_products

26-1-2015Stabilisation the heat is on

•Join our community!

•Join our community!

• Conversate with us on Facebook.

• http://www.facebook.com/Bronswerk.

Stabilisation the heat is on 26-1-2015

Join our community!

• Follow us on Twitter.

• https://twitter.com/bronswerk

26-1-2015Stabilisation the heat is on

• Share our content?

http://www.slideshare.net/Bronswerk

26-1-2015Stabilisation the heat is on

Join our community!

Thank you for your attention!

26-1-2015Stabilisation the heat is on