SSMT05A-ML5 JUNIPER

7/24/2019 SSMT05A-ML5 JUNIPER

1/47

e d u c at i o n s e rv i ce s c o u rs e w a re

ACX Series TechnicalACX Series TechnicalACX Series TechnicalACX Series Technical

OverviewOverviewOverviewOverviewStudent GuideStudent GuideStudent GuideStudent Guide


2/47

ACX Series Technical Overvie

Course SSMT05A-ML5 Juniper Networks, Inc. 2

NOTE: Please note this Student Guide has been developed from an audio narration. Therefore it will have

conversational English. The purpose of this transcript is to help you follow the online presentation and may require

reference to it.

Slide 1

2014 Juniper Networks, Inc. All rights reserved. www.juniper.net | 1CONFIDENTIAL SSMT05A-ML5

Build the Best


3/47



Slide 2

2014 Juniper Networks, Inc. All rights reserved. | www.juniper.net | Proprietary and Confidential

ACX Series

Technical Overview

Welcome to Juniper Networks ACX Series Technical Overview eLearning module.


4/47



Slide 3


Navigation

Throughout this module, you will find slides with valuable detailed information. You can stop any slide with the Pausebutton to study the details. You can also read the notes by using the Notes tab. You can click the Feedback link at anytime to submit suggestions or corrections directly to the Juniper Networks eLearning team.


5/47



Slide 4


Course Objectives

After successfully completing this course, you will be

able to:

Discuss the challenges in todays carrier networks and the

Juniper Networks solution

Describe the ACX Series Universal Access Router product

family

After successfully completing this course, you will be able to:

Discuss the challenges in todays carrier networks and the Juniper Networks solution; and Describe the ACX Series Universal Access Router product family.


6/47



Slide 5


Agenda: ACX Series Technical Overview

Junipers Universal Access Solution

ACX Series Universal Access Routers

Introducing the ACX5000

This course consists of three sections. The three main sections are as follows:

Junipers Universal Access Solution; ACX Series Universal Access Routers; and Introducing the ACX5000.


7/47



Slide 6



ACX Series

Technical Overview



8/47



Slide 7


Section Objectives

After successfully completing this section, you will be

able to:

Discuss the key trends and challenges carrier networks are

facing

Describe Junipers Universal Access solution

Outline Junipers ACX Series Universal Access Routers

After successfully completing this section, you will be able to:

Discuss the key trends and challenges carrier networks are facing; Describe Junipers Universal Access solution; and Outline Junipers ACX Series Universal Access Routers.


9/47



Slide 8


LSP

Services

Mobile

Backbone

Data centers

IP/Internet

Universal EdgeUniversal Access

Multiple physical access networks remain to

backhaul from access to edge.

Universal Access extends the intelligence from

edge to access, creating a seamless end-to-end

service delivery system, with scale and financial

viability.

Single OS

Single control plane

Seamless end-to-end service

Operational simplicity and scale

Residential

Broadband

Edge

Introducing Universal Access

Business

Edge

Mobile

Edge

ACX

Series

Business

Universal

EdgeMX 3DMX 3DMX 3DMX 3D

Junos SpaceEnd-to-end Service Provisioning, Troubleshooting, and Performance Management

Access and

Aggregation

Network

Service providers have traditionally deployed

separate networks for business, residential and

mobile customers

Universal Edge unifies disparate edge networks

into a single service delivery platform for

business, residential and mobile applications

Introducing Universal Access

Traditionally, service providers have deployed separate networks for their business, residential, and mobilecustomers. Convergence and network simplification have been hallmark trends for service providers in recent years,and Juniper has led the way with the Universal Edgeone common platform for business, residential, and mobilesubscribers. Access networks could also benefit from consolidation, but this has remained a challenge due to the

disparate technologies developed for mobile, residential, and business access. Instead of relying on separate accessdevices to connect customers, operators want to converge access networks to deliver both a more predictableexperience to users and better economics to shareholders.

Junipers Universal Access solution is based on the high-performance Juniper Networks ACX Series Universal AccessRouters, anchoring the first fully integrated, end-to-end network architecture that combines operational intelligencewith capital cost savings. With Universal Access, operators can extend the edge network and its capabilities to thecustomer, whether thats a cell tower, a multi-tenant unit, or a residential aggregation point. This creates a seamlessMPLS architecture that is critical to delivering the benefits of 4G radio and packet core evolution with minimal truckrolls, paving the way for new revenue, new business models, and a more flexible and efficient network.

Universal Access also uses Junos Space to offer a single management plane. This enables an open, standards-basedmanagement system that allows for rapid provisioning, fault management, Operation, Administration, andMaintenance (OAM), and service monitoring, as well as integration into existing management systems. In addition,proven synchronization technology results in better utilization of assetsmore calls added, fewer calls dropped, andmore data transported with fewer retransmissions, leading to happier customers and a healthier bottom line.


10/47



Slide 9


Junipers ACX Series Access and

Aggregation Portfolio

Access

ACX4000

ACX2000

ACX1100

ACX5000

(1Q 2015)

Aggregation

ACX Series Universal Access RoutersACX Series Universal Access RoutersACX Series Universal Access RoutersACX Series Universal Access Routers

Key component of Universal Access

Junos OS

Operational intelligence

Efficient use of existing bandwidth

Carrier-class timing and synchronization

ACX1000

ACX2100

ACX500

Junipers ACX Series Access and Aggregation Portfolio

The ACX Series, a key component of Universal Access, is built to support diverse service architectures. It enablesrapid deployment of access services, and it transforms the network to create a seamless end-to-end service deliveryarchitecture.

ACX Series routers enable the Universal Access architecture to run Juniper Networks Junos operating system (JunosOS) from access to edge to core, providing a seamless end-to-end service delivery network for all applications andcustomers. The operational intelligence of IP/MPLS in the Junos OS permits traffic steering and makes efficient use ofexisting bandwidth. Flexible services can be applied at the access layer and optimized per customer. ACX Seriesrouters also incorporate the Juniper Networks TCA Series Timing Appliances technology to deliver high precision,high bandwidth, carrier-class timing and synchronization.

The ACX Series platforms include fixed form-factor models in Juniper Networks ACX1000, ACX1100, ACX2000, andACX2100 Uni versal Access Routers, and a modular option in the ACX4000 Universal Access Router. Theforthcoming ACX5000 Series Universal Access Routers will be high density, high capacity, low cost 1-Gigabit Ethernet/ 10-Gigabit Ethernet / 40-Gigabit Ethernet aggregation routers targeted for Metro Ethernet aggregation. The ACX500is designed for small cell deployments.


11/47



Slide 10


Junipers Evolved Mobile Backhaul Solution

2G GSM / CDMA

3G UMTS /

CDMA 1x EV-DO

4G LTE and

LTE-Advanced

MX240

MX240

MX10/40/80/104

1588v2 Grand Master

SyncE Master

1588v2 BC

1588v2

Grand

Master

1588v2

Grand

Master

MX Series

MX SeriesRNC/BSC

GGSN SGSN

MME

PGW

SGW

AAA

Multi

media

Database

Server

BRAS

and

BNG

Universal Edge

Pre-Aggregation

(Eth/MPLS)

Metro Aggregation

(MPLS)

Mobile Access

(Eth/MPLS)

ACX Series

ACX Series

Converged Access

(Eth/MPLS)

MX240

ACX Series

ACX Series

ACX Series

ACX Series

Small Cells

Junipers Evolved Mobile Backhaul Solution

Juniper Networks offers mobile backhaul solutions that can be purely IP/Ethernet-MPLS based or a hybrid of Ethernetand other Layer 2 technologies such as ATM, T1-E1, and Frame Relay. Juniper Networks products are suited for awide range of mobile backhaul solutions that span migration strategies from legacy technologies to greenfielddeployments that meet the requirements of the next generation mobile backhaul networks.

Solution components include the following:

Juniper ACX Series routers for cell sites with NSN MW Radio; MX Series routers for pre-aggregation or aggregation/hubsite router; Juniper MX Series as provider edge (PE) router plus NSNs or Junipers Grandmaster; and Junos Space plus NSN NetAct with NetViewer for management.

There can be multiple migration paths from the existing legacy-technology-based backhaul networks. Some of theseoptions can provide a migration strategy that fits with the long-term plan to move to the latest technologies such asLTE.

The functionality of the mobile backhaul network is independent and not influenced by the type of traffic that is

transported across the network. Services such as class of service (CoS), MPLS, and virtual private LAN service(VPLS)coupled with features such as high availability HA, OAM, and reliabilitycan be leveraged for mobile traffic.Mobile network operators that are already familiar with the Junos OS can implement all of the end-to-end backhaulnetwork with considerable ease.

Juniper Networks can provide one solution for Layer 2 and Layer 3regardless 2G/2.5G/3G/LTE/WiMax.


12/47



Slide 11


OtherOtherOtherOther

JunosJunosJunosJunosSpaceSpaceSpaceSpace

ApplicationsApplicationsApplicationsApplications

OtherOtherOtherOther

JunosJunosJunosJunosSpaceSpaceSpaceSpace

ApplicationsApplicationsApplicationsApplications

End-To-End Metro-E Solution Managed by

Junos Space

ACX4000/MX104

ACX4000/MX104

MX240/480

MX240/480

MX960

MX960

ACX1000

Business

Access

Residential

Access

ACX1000

ACX1000

Mobile

Access

Converged Access/

Hub-site Router

Aggregation

RouterCell-site /

CPEEdge Router

CEN Access

(CKT/L2/IP/MPLS)

CEN aggregation

(L2/IP/MPLS)

CEN Core

(IP/MPLS)

Services Activation DirectorServices Activation DirectorServices Activation DirectorServices Activation Director

L2/L3 Service Provisioning

LSP Provisioning

QoS Profiler and Scheduler

Network Faults and Diagnostics

PTP and SyncE Config

Remote OS Upgrade

FM/PM (OpenNMS)FM/PM (OpenNMS)FM/PM (OpenNMS)FM/PM (OpenNMS)

Device and Service Alarms

Alarm Aggregation

Alarm De-Duplication

Performance charts

SLA monitoring

REST API and MTOSI for Northbound OSS/BSS Integration

Configuration Mgmt

Inventory

Security SDK Toolkit

Zero Touch Deployment

DMI AdaptersDMI AdaptersDMI AdaptersDMI AdaptersDMI AdaptersDMI AdaptersDMI AdaptersDMI Adapters

DMI Adapters

Other

JunosSpace

Applications

Junos

Space

End-To-End Metro-E Solution Managed by Junos Space

Junipers Junos Space is a comprehensive network management solution that simplifies and automates managementof Junipers switching, routing, and security devices. Junos Space consists of a network management platform fordeep element management, domain-optimized management applications for reducing costs and provisioning newservices quickly, and a programmable software development kit (SDK) for customization. Working cohesively, Junos

Space offers a unified network management and orchestration solution to help service providers to more efficientlymanage their networks.

Junos Space provides standard element management system (EMS) functions relating to device discovery,configuration management, role-based access control, scripting, and device image management. Fault andperformance management is available through the integration of the OpenNMS platform into Junos Space.

A powerful REST API layer enables northbound operations support systems (OSS) and business support systems(BSS) platforms to access management functions and implement automation.

The Device Management Interface (DMI) is basically a Netconf kind of southbound interface; all Junos OS devicesuse this interface to communicate with Junos Space. A DMI adaptor has been written for TCA and Netscreen.

The Multi-Technology Operations System Interface (MTOSI) is a telecom standard, object-oriented language forexchanging information that operators are moving away from. REST API is based on web technologies and the XMLinterface, and is more popular.


13/47



Slide 12


Section Summary

In this section, we:

Discussed the key trends and challenges carrier networks

are facing

Described Juniper's Universal Access solution

Outlined Junipers ACX Series Universal Access Routers


Discussed the key trends and challenges carrier networks are facing; Described Juniper's Universal Access solution; and Outlined Junipers ACX Series Universal Access Routers.


14/47



Slide 13


Learning Activity 1: Question 1

Junipers Universal Access solution is based on which

of Junipers high-performance routers?

A. ACX Series

B. M Series

C. PTX Series

D. T Series



15/47



Slide 13



True or false: Juniper Networks offers mobile

backhaul solutions that can be purely IP/Ethernet-

MPLS based or a hybrid of Ethernet and other Layer 2

technologies such as ATM, T1-E1, and Frame Relay.

A. True

B. False



16/47



Slide 14



ACX Series

Technical Overview



17/47



Slide 15


Section Objectives


able to:

Describe the ACX1000, ACX1100, ACX2000, ACX2100, and

ACX4000 Universal Access Routers

Describe the ACX500 Universal Access Router and its

deployment scenarios


Describe the ACX1000, ACX1100, ACX2000, ACX2100, and ACX4000 Universal Access Routers; and Describe the ACX500 Universal Access Router and its deployment scenarios.


18/47



Slide 16


Universal Access Routers

Junipers Universal Access Router

Fixed and modular platforms all running the Junos OS

Simplified end-to-end provisioning with support for full

IP/MPLS with traffic engineering

Industry leading performance of up to 60 Gbps for all

models

Integrated precision timing (IEEE1588v2, SyncE)

10-Gig interfaces for converged access

Supports mobile network evolution path (2G/3G/4G LTE)

Complements Universal Edge

Supports a suite of Layer 2, Layer 3, and IP/MPLS

functionality

Seamless MPLS provides most flexible service

architecture

The New Benchmark for Access Networks

ACX2000

ACX2100

ACX1100

ACX1000

ACX4000

ACX Series

Universal Access Routers

The fixed configuration ACX1000, ACX1100, ACX2000, and ACX2100 Universal Access Routers come in a compact1 rack unit (U) form factor. These are environmentally hardened and support passive cooling for easy deployments inoutside street cabinets or environmental enclosures. The ACX4000 Universal Access Router is a modular 2.5U formfactor with higher performance and configurable options for interface types. Powered by the Junos OS, the ACX

Series delivers industry-leading performance and simplified end-to-end provisioning with support for full IP/MPLS withtraffic engineering, and extensive Layer 2 and Layer 3 functionality.

The ACX Series cost-effectively addresses current operator challenges to rapidly deploy new, high bandwidthservices. With industry leading performance of up to 60 Gbps for all models and the most comprehensive, traditional,and packet timing features, the ACX Series is well positioned to address the growing bandwidth needs in the accessnetwork. These platforms deliver the necessary scale and performance needed to support multi-generation services.With support for extensive hardware and software features, the ACX Series extends the operational intelligence all theway to the access network to deliver seamless end-to-end services. Equipped with interfaces for both time divisionmultiplexing (TDM) and Ethernet (high density 1-Gigabit Ethernet, Power over Ethernet (PoE), and 10-GigabitEthernet), as well as support for high precision clocking and synchronization, the ACX Series platforms can supportthe mobile networks evolution path from 2G/2.5G to 3G/4G/LTE, as well as diverse interface requirements inEnterprise applications.

The ACX Series family complements Junipers Universal Edge and Universal WAN solutions through a flexible andscalable enterprise and branch routing portfolio optimized to support rapidly growing mobile, video, and cloudcomputing applications. The ACX Series introduces Junipers proven IP/MPLS leadership from core and edge into theaccess layers of the network. Still maintaining relative simplicity in the access network, the ACX Series supports a richsuite of Layer 2, Layer 3, and IP/MPLS functionality to allow large-scale seamless MPLS networks with simplifiedservice provisioning and operations.


19/47



Slide 17


ACX1000

Entry-level access router

DC power only

Eight T1/E1 ports

12 1-Gigabit Ethernet ports (eight

of which are RJ-45)

Combo ports provide additional

RJ-45 or SFP ports

Rear View

ACX1000

8x

T1/E1

8x

1GbE

Combo Ports

(4x RJ-45, 4x SFP)

ACX1000

The ACX1000 routers have 1-Gigabit Ethernet interfaces and offers an entry-level configuration which is ideal forcabinet and tower deployment. This device is powered by DC only.

The ACX1000 routers contain eight T1/E1 ports and twelve 1-Gigabit Ethernet ports, eight of which are RJ-45 ports.

The ports labeled Combo Ports provide the additional four 1-Gigabit Ethernet RJ-45 ports or four 1-Gigabit Ethernetsmall form-factor pluggable (SFP) ports to bring the total 1-Gigabit Ethernet ports to twelve. You can use only one setof combination ports at a time.


20/47



Slide 18


ACX1100

Ethernet only configuration

AC and DC power options available

12 1-Gigabit Ethernet ports (eight

of which are RJ-45)

Combo ports provide and

additional RJ-45 or SFP ports

Rear View

ACX1100

Combo Ports

(4x RJ-45, 4x SFP)

8x

1GbE

ACX1100

The ACX1100 routers, also with 1-Gigabit Ethernet interfaces, is an Ethernet-only configuration, ideal for externalcabinet or tower installations. AC and DC power options are available.

The ACX1100 routers contain twelve 1-Gigabit Ethernet ports, eight of which are RJ-45 ports. As with the ACX1000,

the ports labeled Combo Ports provide the additional four 1-Gigabit Ethernet RJ-45 ports or four Gigabit Ethernet SFPports (to bring the total of 1-Gigabit Ethernet ports to twelve) and you can only use one set of combination ports at atime.


21/47



Slide 19


ACX2000

10-Gigabit Ethernet capabilities

DC power only

16 T1/E1 ports

Six 1-Gigabit Ethernet ports, plus

two 1-Gigabit Ethernet ports which

can provide PoE+

Two 1-Gigabit Ethernet SFP ports

Two 10-Gigabit Ethernet SFP+

ports

Rear View

ACX2000

16x

T1/E1

2x

1GbE

w/PoE+

2x

1GbE

SFP

2x

1GbE/

10GbE

SFP+

6x

1GbE

ACX2000

The ACX2000 is a versatile access platform that is 10-Gigabit Ethernet capable. This is a DC only unit.

The ACX2000 router contains sixteen T1/E1 ports, six 1-Gigabit Ethernet ports, and two 1-Gigabit Ethernet PoE+ports. Two ports labeled GE accept 1-Gigabit Ethernet SFP transceivers. Two ports labeled XE accept 1-Gigabit

Ethernet SFP transceivers and 10-Gigabit Ethernet SFP+ transceivers depending on network needs.

The ACX2000 router has one pseudo Flexible PIC Concentrator (FPC 0), and four pseudo PICs (PIC 0 through 3).


22/47



Slide 20


ACX2100

10-Gigabit Ethernet capabilities

More SFP ports than ACX2000

AC and DC power options available

16 T1/E1 ports

Six 1-Gigabit Ethernet ports, plus

two 1-Gigabit Ethernet ports which

can provide PoE+

Rear View

ACX2100

16x

T1/E1

4x 1Gbe

Combo

Ports

4x

1GbE

2x

1GbE

SFP

2x

1GbE/

10GbE

SFP+

ACX2100

The ACX2100 is a fixed port configuration and is 10-Gigabit Ethernet capable with more SFP ports than the ACX2000.AC and DC power options are available.

The ACX2100 router contains sixteen T1/E1 ports, and four 1-Gigabit Ethernet ports. The ACX2100 router also

contains four ports for installing transceiverstwo ports labeled GE accept 1-Gigabit Ethernet SFP transceivers, andtwo ports labeled XE accept 1-Gigabit Ethernet SFP transceivers and 10-Gigabit Ethernet SFP+ transceivers. Theports labeled Combo Ports provide an additional four copper 1-Gigabit Ethernet ports or four 1-Gigabit Ethernet SFPports. You can use only one set of combination ports at a time.

As with the ACX2000, the ACX2100 router has two pseudo Flexible PIC Concentrators (FPC 0 and FPC 1), and fourpseudo PICs (PIC 0 through 3).


23/47


24/47



Slide 22


ACX Series Universal Access RoutersACX

ModelDescription

Redundant

Power

Rack

units

Fan-

less

T1/

E1

1GbE /

10GbE

ACX1000 1G router, with T1/E18xT1/E1, 12xGbE (8xRJ45, 4xRJ45/SFP) No

(DC dual feed)1 Yes 8 1GbE

ACX1100 1G router, Ethernet-only12xGbE (8xRJ45, 4xRJ45/SFP)

Yes

AC/DC1 Yes

ETH

only1GbE

ACX2000 10G router, with T1/E116xT1/E1, 10xGbE (8xRJ45, 2xSFP), 2x10GbE

SFP+, 2xPoE++ 65W on 2xRJ45 ports

No

(DC dual feed)1 Yes 16 10GbE

ACX2100 10G with T1/E1 and more SFP Ports16xT1/E1, 10xGbE (4xRJ45, 4xRJ45/SFP,

2xSFP), 2x10GbE SFP+

Yes

AC/DC1 Yes 16 10GbE

ACX4000 10G Modular router, with 2 MIC slots16xT1/E1, 10xGbE (8xRJ45/SFP, 2xSFP),

2x10GbE SFP+, 2xPOE++ 65W on 2x RJ45 ports,

temperature hardened,

Modules: 16xT1/E1, 6xGbE, 4xCHOC3/STM-1

Yes

AC/DC

Pluggable

Hot swap

2.5 No 32 10GbE

SFP+ ports can be configured to be 1GbE ports and accept 1GbE SFP


This slide provides a side-by-side comparison of the ACX1000, ACX1100, ACX2000, ACX2100, and ACX4000Universal Access Routers.

Note also that all of these models have a fan-less design except for the ACX4000.


25/47



Slide 23


Small Cell Deployment: ACX Advantage Zero touch deployment (ZTD) Secure remote access for management

IPsec for any management traffic

SSHRemote

Mgmt

VRRP Redundant management sessions

Redundant

GPS receiver Timing over packet

PTP GM

PTP BC/TC

PHY based time-stamping and Hybrid m ode

Timing

Security

Design

L2 and L3 Filters

Security data/configuration protection: Console security

Encryption for USB configuration

MACSEC

L2, L3 or MPLS transport NAT/PAT for public/private model

DHCP clientWAN

Design

Address management for the access point

Local DHCP server

DHCP binding p ersistence

Static/default routing

Switching/VLANs PoE+ VLAN based QoS -p rioritization

LANDesign

EnvironmentallyHardened

ACX500

Small Cell Deployment: ACX Advantage

The ACX500 is the latest addition to the ACX Series product family and is specifically designed for small celldeployments. The ACX500 provides a number of advantages for small cell deployments, including the following:

ZTD (zero touch deployment);

Layer 2 and Layer 3 design options; LAN features such as PoE, Dynamic Host Configuration Protocol (DHCP) server, hierarchical quality of service(HQoS), and so forth;

Redundancy features such as Virtual Router Redundancy Protocol (VRRP); Timing features like GM, hybrid mode, PHY time stamping; and Security feature like Media Access Control Security (MACsec), MAC validate, Layer 2 and Layer 3 firewall filters.


26/47



Slide 24


Small Cell Backhaul Router

2x 1GbE (SFP) and 4x 1GbE (Combo, 3x PoE+ support)

Temp. hardened (-40 to +65 C), passive cooling

10.7 in. (W) x 1.75 in. (H) x 11 in. (D) (TBD)

Advanced TimingAdvanced TimingAdvanced TimingAdvanced Timing GPS receiver integration, GM capability

Advanced SecurityAdvanced SecurityAdvanced SecurityAdvanced Security IPsec, NAT, MacSec and TPM

Advanced SLA managementAdvanced SLA managementAdvanced SLA managementAdvanced SLA management RFC2544, Y.1564, TWAMP

3x 1GbE (SFP) and 3x 1GbE (Cu, PoE+ support)

IP65 compliantIP65 compliantIP65 compliantIP65 compliant, Passive cooling, power budget: 45W

9.47 in. (W) x 15.8 in. (H) x 5.6 in. (D) (TBD)

Advanced TimingAdvanced TimingAdvanced TimingAdvanced Timing - GPS receiver integration, GM capability

Advanced SecurityAdvanced SecurityAdvanced SecurityAdvanced Security IPsec, NAT, MacSec and TPM

Advanced SLA managementAdvanced SLA managementAdvanced SLA managementAdvanced SLA management RFC2544, Y.1564, TWAMP

SCR Indoor SKU

SCR - Outdoor SKU

FRSFRSFRSFRS 2H20142H20142H20142H2014

ACX500

Small Cell Backhaul Router

This slide provides a summary of the ACX500 router, which should be available in the second half of 2014. TheACX500 is a 6 Gigabit Ethernet box, supports PoE, is hardened for outdoor use, and is also temperature hardened forindoor use. It supports Network Address Translation (NAT) and IPsec. The device also has integrated timing, andintegrated GPS clocking. This product has these features because a small cell site router has to be deployable in

various, not-so-friendly environments within the network.


27/47



Slide 25


Metrocell Deployment Use Case

ACX500 Indoor Use Case

GPS

3rd Party

MetroE Network

ISPACX500

PE

Security

GW

IPsec (Between Small Cell and Centralized Sec GW)

IPsec (For ACX/EX management traffic only)

ACX acts as DHCP Server for Small Cells

NAT for transit traffic

Security GW

(IPsec only)

Femto GW

Cell Site

Router

Provisioning

S1, X2, Iub

PoE

PoE

PoEEX2200

Metrocell Deployment Use Case

On this slide we are showing a simple use case for the ACX500. In this application, ACX500 is placed indoors andserves the small cell and the various femtocells. It provides IPsec functionality for management traffic, acts like aDHCP server for the small cells, and also performs NAT. The reason why it performs NAT and IPsec is because thetraffic is traversing the third-party ISP network that is essentially not trusted, and there is a need for address

translation. This use case is currently tested and being trialed with AT&T.


28/47



Slide 26


Section Summary


Described the ACX1000, ACX1100, ACX2000, ACX2100,

and ACX4000 Universal Access Routers

Described the ACX500 Universal Access Router and its

deployment scenarios


Described the ACX1000, ACX1100, ACX2000, ACX2100, and ACX4000 Universal Access Routers; and Described the ACX500 Universal Access Router and its deployment scenarios.


29/47



Slide 27



Which ACX Series model offers a modular design?

A. ACX1000

B. ACX2000

C. ACX2100

D. ACX4000



30/47



Slide 27



Which three of the following are true of the ACX Series

devices? (Choose three.)

A. AC and DC power options are available, depending on the

model

B. The ACX4000 can support two modular interface cards

C. The ACX500 is specifically designed for small cell

deployments

D. All models offer a fan-less design



31/47



Slide 28



ACX Series

Technical Overview



32/47



Slide 29


Section Objectives


able to:

Describe the ACX5000 models

Describe the ACX5000 use cases


Describe the ACX5000 models; and Describe the ACX5000 use cases.


33/47



Slide 30


ACX5000 LineACX5048

48 x 1/10GbE SFP+

6 x 40GbE QSFP uplinks

1.44 Tbps throughput

1U fixed form factor

ACX5096

96 x 1/10GbE SFP+

8 x 40GbE QSFP uplinks

2.56 Tbps throughput

2U fixed form factor

E-LINE, E-LAN with full E-OAM, comprehensive Layer 2 Multicast solution over

IP/MPLS infrastructure

IP-VPN services

10-Gigabit Ethernet

Available 1st half of 2015

ACX5000 Line

The ACX5000 line of routers are high density, high capacity, low cost 1-, 10-, and 40-Gigabit Ethernet aggregationrouters targeted for Metro Ethernet aggregation.

The following two models will be available in the first half of 2015:

The ACX5048, which is 1U in height, with 48 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ ports, along with six40-Gigabit Ethernet quad small form-factor pluggable plus (QSFP+) uplinks, and 1.44 Tbps throughput; and

The ACX5096, which is 2U in height, with 96 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ ports, along with eight40-Gigabit Ethernet QSFP+ uplinks.

The ACX5000 line provides E-LINE, E-LAN and IP-VPN service. It enables service providers to deploy cost-effectiveMetro Ethernet aggregation solutions that are suited for a new wave of Metro Ethernet deployments where 10-GigabitEthernet user-to-network interface (UNI) will rapidly replace 1-Gigabit Ethernet UNIs due to the evolution of thebusiness customer, gigabit passive optical network (GPON), and base stations, from 1-Gigabit Ethernet to 10-GigabitEthernet interfaces.

The ACX5000 routers will enable Juniper to enhance its market position in the Metro Ethernet market.


34/47



Slide 31


ACX5000 Applications:

Metro-E Aggregation

ACX5000 Applications: Metro-E Aggregation

The ACX5000 line of routers is perfect for the access and aggregation segments and complements the Juniperprovider edge solution (MX Series). A generic network diagram is presented on this slide. On the following slides wewill describe some possible applications.


35/47



Slide 32


ACX 5000 Applications:

Metro-E Aggregation (Business)

MetroE Aggregation (No residential access)E-OAM, E-LINE/E-LAN (Ethernet and MPLS)

High capacity, IP-VPN/IP support

SP Market

MSO

ACX 5000 Applications: Metro-E Aggregation (Business)

The ACX5000 line of routers can be used in the aggregation layer. The solution can be Layer 2 or IP/MPLS based,depending on service provider preference. If an ACX5000 router is used in an IP/MPLS solution, it provides all MetroEthernet Forum (MEF) service with Ethernet-OAM (E-OAM), and IP VPN, and has the logical scale required for thistype of applicationsuch as, 288,000 MAC address, 128,000 forwarding information base (FIB) prefixes, 12,000

transit label-switched paths (LSPs), scalable Bidirectional Forwarding Detection (BFD), and so on. The ACX5000 lineenables service providers to deploy a high-capacity aggregation metro Ethernet solution all the way to the customeredge.


36/47



Slide 33



Metro-E Aggregation (Business)

High Capacity CLE/CPE EAD Device

E-OAM, E-LINE/E-LAN (Ethernet and MPLS)High Capacity, IP-VPN/IP Support

SP Market

MSO

ACX 5000 Applications: Metro-E Aggregation (Business)

In this role, the ACX5000 router acts like a high-capacity Ethernet aggregation device (EAD) device, ideal for servicinglarge buildings or business areas. It enables service providers to offer 1-Gigabit Ethernet service and capture newcustomer opportunities as demand for 10-Gigabit Ethernet service takes off.

If local rings are used for creation of service coverage, the 40-Gigabit Ethernet option can be considered as a veryhandy option that provides optimal usage of the local dark fiber. An ACX5000 router can cover all essentialfunctionality needed for this position in the network, such as the following:

MEF service; IP VPN service; E-OAM; RFC 2544 reflection that enables issuing of service certificates, option to create simplified deployments by using

G.8032 in addition to deployments of IP/MPLS in the last mile.


37/47



Slide 34



Metro-E Aggregation (Residential)

MetroE Aggregation (No Residential access)

E-OAM, E-LINE/E-LAN (Ethernet and MPLS),

Multicast (L2 with IGMP snooping or L3 IP-VPN)

High Capacity, IP-VPN/IP Support, IP Multicast

SP Market

ACX 5000 Applications: Metro-E Aggregation (Residential)

Residential services, such as triple-play, in addition to MEF and IP VPN service, will most likely require a flexible andscalable multicast solution. The ACX5000 line of routers provides deployment options for Layer 3 as well as Layer 2multicast over a bridged or VPLS network. This gives service providers the tools to deploy optimal networktechnology, depending on circumstances, in addition to enabling service providers to effortlessly migrate the access

network from 1-Gigabit Ethernet to 10-Gigabit Ethernet UNIs.


38/47



Slide 35


ACX5000 Value Proposition

1GbE to 10GbENetwork and

Service Migration

High densityand capacity1GbE/10GbE

platform

Gracefulmigrationfrom 1GbEto 10GbE

Flexible ServiceOfferings

E-LINE, E-LAN

Ethernet OAM

802.3ah802.1agY.1731

PM

RFC2544

IP-VPN

FlexibleNetwork

Deployment

EthernetIP/MPLS

High Availability andScalable Networking

Junos OS for buildinghighly reliable andscalable networks

G.8032,RSVP

1:1, FRR,BFD, IP

LFA, PWERed.,VRRP

ISSU,Virtual

Chassis,MC-LAG

SeamlessMPLS

networkingsolution

ACX5000

ACX5000 Value Proposition

The ACX5000 line provides the following to address service providers needs:

A high capacity, high density 1-Gigabit Ethernet/10-Gigabit Ethernet solution; Graceful migration from 1-Gigabit Ethernet to 10-Gigabit Ethernet UNI service;

Meets CapEx targets for Metro-E access networks; A full set of E-LINE and E-LAN service, IP-VPN service, and multicast solution with service-level agreement (SLA)enforcement;

High reliability networking features including advanced networking concepts for protections against nodal failure,and ensuring hitless network upgradessuch as multichassis link aggregation group (MC-LAG), Virtual Chassis,and unified in-service software upgrade (ISSU)that enable service providers to deploy Metro-E solution with99.999% availability on a low cost platform.


39/47



Slide 36


Section Summary


Described the ACX5000 models

Described the ACX5000 use cases


Described the ACX5000 models; and Described the ACX5000 use cases.


40/47



Slide 37



True or false: The ACX5000 line of routers offer 1-, 10-,

and 40-Gigabit Ethernet capability.

A. True

B. False



41/47



Slide 37



True or false: The ACX5000 line of routers are ideal

for small cell site deployments.

A. True

B. False



42/47



Slide 38


Course Summary

In this course, we:

Discussed the trends and challenges in todays carrier

networks and the Juniper Networks solution

Described the ACX Series Universal Access Router product

family

In this course, we:

Discussed the trends and challenges in todays carrier networks and the Juniper Networks solution; and Described the ACX Series Universal Access Router product family.


43/47



Slide 39


Additional Resources

Education Services training classes

http://www.juniper.net/training/technical_education/

Juniper Networks Certification Program Web site

www.juniper.net/certification

Juniper Networks documentation and white papers

www.juniper.net/techpubs

To submit errata or for general questions

[email protected]

For additional resources or to contact the Juniper Networks eLearning team, click the links on the screen.


44/47



Slide 40


Evaluation and Survey

You have reached the end of this Juniper Networks

eLearning module

You should now return to your Juniper Learning

Center to take the assessment and the student

survey

After successfully completing the assessment, you will earn

credits that will be recognized through certificates and non-

monetary rewards

The survey will allow you to give feedback on

the quality and usefulness of the course

You have reached the end of this Juniper Networks eLearning module. You should now return to your JuniperLearning Center to take the assessment and the student survey. After successfully completing the assessment, youwill earn credits that will be recognized through certificates and non-monetary rewards. The survey will allow you togive feedback on the quality and usefulness of the course.


45/47



Slide 41


2014 Juniper Networks, Inc.

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and

ScreenOS are registered trademarks of Juniper Networks, Inc. in the

United States and other countries. The Juniper Networks Logo, the

Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All

other trademarks, service marks, registered trademarks, or registered

service marks are the property of their respective owners. Juniper

Networks reserves the right to change, modify, transfer, or otherwise

revise this publication without notice.

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of JuniperNetworks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE aretrademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered servicemarks are the property of their respective owners. Juniper Networks reserves the right to change, modify, transfer, orotherwise revise this publication without notice.


46/47



Slide 42

CONFIDENTIAL


47/47

Corporate and Sales Headquarters

Juniper Networks Inc

APAC Head qua rt ers

Juniper Networks (Hong Kong)

EMEA Headquarters

Juniper Networks Ireland

Copyright 2010 Juniper Networks, Inc.

Al l ri gh t s res erv ed . Juni pe r Net wor ks,

the Juniper Networks logo Junos

e d u c a t io n s e rv i ce s c o u r se w a r e

SSMT05A-ML5 JUNIPER

Documents

Transcript of SSMT05A-ML5 JUNIPER