SRM Free Text Carts SRM_SHO_303 SRM Free Text Carts.
Transcript of SRM Free Text Carts SRM_SHO_303 SRM Free Text Carts.
Refresher: Free Text Carts?Free Text Carts are used for any commodity listed in the Purchasing / AP Quick Reference Guide requiring Shopping Cart as the purchase method and for which there is not a punch-out catalog loaded. After approval, Free Text carts arrive at Purchasing for manual processing.
Examples of orders that would follow the Free Text process:
•Any purchase, regardless of amount, that involves written agreements
•Commodities having special conditions or nature (e.g., personal service contracts, leases, licensed promotional goods, etc.)
•Purchase of capital equipment (i.e., items > $5000 cost per piece)
•Purchases, regardless of amount, for which the procurement card is not the applicable method or the vendor does not accept the procurement card
SRM Free Text Carts 2
Training Requirements for SRM Departmental RolesRole Training Requirements
Shopper Shoppers are required to take and pass four course modules in successive via myUK Training:
SRM_SHO_301 SRM Shoppers IntroductionSRM_SHO_302 SRM Punch-out CatalogsSRM_SHO_303 SRM Free Text Carts (This course)SRM_SHO_304 SRM Supplementary Information
Approver Approvers are required to take and pass the MM_APP_300 Combined Approvers course via myUK Training .
Goods Confirmer Goods Confirmers are required to take and pass the SRM_CON_300 SRM Goods Confirmations course via myUK Training .
SRM Free Text Carts 3
Create Free Text Shopping Cart
“Free Text” Shopping Carts are applicable for any commodity in the Purchasing / AP Quick Reference Guide requiring Shopping Cart as the
purchase method and for which there is not a punch-out catalog loaded.
SRM Free Text Carts
Free Text Shopping Cart – OverviewThe first step in creating a Free Text Shopping Cart is obtaining a quote from a supplier. As the name “Free Text” implies, the Shopper enters the line items directly into the cart via freehand rather than selecting from punch-out catalogs. The Shopper attaches the quote to the Free Text Shopping Cart during the creation process.
Free Text carts frequently, although not always, originate from suppliers holding a University Price Contract or other agreement. If needed, the Price Contracts listing can be found on the Purchasing website at: http://www.uky.edu/Purchasing/.
All Free Text Shopping Carts require approval regardless of dollar amount. The carts route to Purchasing after approval and are processed manually based on established protocols.
Important: Be sure to create Free Text carts independently of punch-out catalog orders. Due to workflow routing, a single cart cannot contain a mix of punch-out and Free Text items.
SRM Free Text Carts 5
Free Text – Begin Shopping Cart from POWL1. Start from the
Shopper tab
2. Select Shopping Cart from Site
Navigation to display the POWL
3. Click Create Shopping Cart
SRM Free Text Carts 6
Free Text – Default Settings: Set Values
4. Click Set Values within Default Settings
7SRM Free Text Carts
Two default values – Account Assignment and Delivery Address – can be set at the beginning of the ordering process. This will copy the data to all line items as they are placed
into the Shopping Cart, thus bypassing tedious line item entries later.
Free Text – Complete Delivery Address (Required) 5. Select the
Delivery Address / Performance Location tab
8SRM Free Text Carts
6. Complete contact person, floor, room, etc.
Delivery information flows in from Personal Settings and reflects your building address only. The Shopper must add the Contact Person, Floor, and Room Number, etc. This must
be completed for each cart and will populate to all line items placed in the cart.
9
Important: Be sure to enter the delivery information at the header level. Bypassing
entry of the contact person, floor, and room number within Set Values will require the
information to be entered for each line item in the bottom Details section.
Free Text – Complete Delivery Address (Required)
SRM Free Text Carts
10
Setting an Alternate Delivery BuildingAt the Shopper’s choosing, you can enter an alternate building for delivery on a cart-by-cart
basis. After selecting the new building by speed sort number, complete the section with contact person’s name and room and floor numbers.
If desired, click the possible entries icon and select
alternate building by speed sort number. Remember to add in the contact person, floor, and
room number.
Free Text – Set Account Assignment (Optional)
8. Default Account Assignment Category is Cost Center. You can also select WBS Element from
the dropdown if needed.
12
9. Enter the Cost Center or WBS Element number as
applicable
Enter Cost Center or WBS Element information if the entire order will be charged to the same cost object structure. Alternatively, if you need to charge various line items
to different cost objects, this can be entered as indicated on Slide 20.
TIP: WBS Elements relate to grants.
SRM Free Text Carts
Free Text – Finish Header Values
10. Click OK to finish Set Values
13
No entries are required on other tabs within Default Settings
SRM Free Text Carts
Free Text – Header Notes
14
11. Optional: If desired enter notes in the General Data (“Header”) area. Approval Notes are internal and will not print on
the purchase order. Note to Supplier will print on the purchase order.
SRM Free Text Carts
Free Text – General Entries
12. Enter line item Description
SRM Free Text Carts
13. Enter Quantity and Unit
15. Enter Delivery Date: This is the date when
physical delivery is required from Supplier.
14. Enter Price each
Data for purchased items is entered manually into the appropriate cells. This information originates from the supplier quote.
15
Free Text – Select Product Category
16. Click Product Category search icon
SRM Free Text Carts
The Shopper must select the Product Category. This is simply a general descriptive category in which the good or service “fits” and is selected via a search feature.
16
Free Text – Select Product Category
17. Enter a general key term for the type of item being
purchased. Place (*) on both ends of the term. Click Start
Search.
SRM Free Text Carts
TIP: Alternatively, you can leave search term blank and click Start Search for a full listing of product
categories. 19. Click OK
18. Highlight the correct category from the search
results list
17
Free Text – Complete Remaining Lines20. Enter related
information for other line items from quote, if
applicable.
SRM Free Text Carts
21. When complete, click to open Details (Bottom)
section.
18
Free Text – Enter Supplier Product Number(s)
22. Enter Supplier Product Number(s) for
each line
SRM Free Text Carts
If the quote has Supplier Product Numbers, they should be entered on the Item Data tab in the Details Section. Enter for each line as applicable.
If needed, click the arrows to move among multiple line
items.
19
Free Text – Account AssignmentAccount Assignment entries can be formed at the line item level within the bottom
Details section.
Remember: If you already set the Account Assignment Information within Default Values: Set Values at the header
level, you can bypass this section.
23. Select the Account Assignment Category (either cost center or WBS element).
24. Enter the cost center or WBS element
number.
SRM Free Text Carts 20
Free Text – GL Account
25. A suggested GL will populate automatically on many carts or can be entered/overwritten as
needed. The Shopper should check the GL to ensure it is correct based on the nature of the
particular purchase.
TIP: The General Ledger (GL) Account is an accounting
component that relates to the description of the goods or
services purchased.
SRM Free Text Carts
If needed, click on the right side of the GL box to access a Possible Entries icon and
search function.
21
Note: If ordering a single item that is over $5000, a capital equipment GL must be
assigned to that line item. A capital GL is prefixed with 55XXXX and can be selected
from within the search function.
Free Text – Line Item Notes
26. Optional: If desired, click on link(s) to add
line item notes.
SRM Free Text Carts
If needed notes can also be added to individual line items. “Internal Note” will not print on the purchase order; all other notes will print on the purchase order.
22
Free Text – Add Attachment(s)
27. Click Add Attachment
SRM Free Text Carts
The supplier quote should be attached to the Shopping Cart; other documents can optionally be added.
28. Click Browse
TIP: For Shopping Carts with multiple line items, the quote only needs
attached to Line Item 1.
23
Free Text – Add Attachment(s)
29. Navigate to and select the file to attach
SRM Free Text Carts
30. Click Open
24
Free Text – Add Attachment(s)
31. Add a descriptive name for the attachment and check the Visible Internally only box.
Click OK.
SRM Free Text Carts
Document successfully attaches to Shopping Cart
25
Free Text – Line Item Delivery Address
Provided you entered the Delivery Address information within the Default Values: Set Values section at the header
level, nothing needs entered here.
Remember: If you already set the Delivery Address Information within Default Values:
Set Values at the header level, you can bypass this section. If you omitted that
step, the contact person, floor and room number will need entered manually for
each line.
SRM Free Text Carts 26
Free Text – Set Preferred Supplier
32. Click the Possible Entries icon to begin
search
SRM Free Text Carts
Important: If your cart has multiple line items, the
vendor number will need entered for each.
The Preferred Supplier related to the quote must be entered. It can be assigned from the University vendor database via the Source of Supply tab.
27
Free Text – Preferred Supplier Search
33. Using the Name 1 field, enter key word(s) related to the Preferred
Supplier name. Place asterisks around and between search terms.
SRM Free Text Carts 28
Free Text – Preferred Supplier Search
34. Select the correct supplier from the search
results
SRM Free Text Carts 29
Free Text – Preferred Supplier Search
The Preferred Supplier number populates into
the field
Remember: Be sure to repeat the Preferred Supplier number on each line item. The
supplier number can be entered manually for each additional line.
SRM Free Text Carts 30
Free Text – Check and Order
36. Click Order to finish
35. Click Check to confirm whether errors exist
Note: Only click the SAVE button if the order is to be placed on HOLD and finished later.
A Saved Shopping Cart resides in the Shopper’s POWL and does not move forward
to the Approver.
SRM Free Text Carts 31
Free Text – Status from POWLA Free Text Shopping Cart next moves to the Approver(s) via Workflow. Once approved,
the cart routes to Purchasing for manual processing and order placement.
Click Refresh to see Shopping Cart Status
Newly created Free Text cart resides in POWL with current
status.
SRM Free Text Carts 33
Completion of SRM Free Text CartsThis completes the module SRM_SHO_303 Free Text Carts. After completing the Check for Understanding, you should book and complete the fourth and final Shopper module SRM_SHO_304 Supplementary Information.
Remember, all four modules must be completed and passed to receive the SRM Shopper role:
SRM_SHO_301 SRM Shoppers IntroductionSRM_SHO_302 SRM Punch-out CatalogsSRM_SHO_303 SRM Free Text CartsSRM_SHO_304 SRM Supplementary Information
SRM Free Text Carts 34