SR. PRODUCT MODEL NO NO. 1) PLASMA PROF 37 C 961 TECHNICAL DETAIL.pdf · 2011. 6. 13. · 11) POWER...

Wearresist Technologies Pvt. Ltd 749/9, GIDC, Makarpura, Vadodara – 390 010, Gujarat (INDIA) Ph: +91-265-2651548, 6581131, Fax: +91-265-2649085 E-mail: [email protected] Website: www.wearresist.com

Page no.1 of 32

Wearresist Technologies Private Limited

X`tralife to your wear prone components

An ISO 9001: 2000 Company

TECHNICAL DETAILS SR. PRODUCT MODEL NO NO. 1) PLASMA PROF 37 C 961

Plasma cutting power source ON AIR ignition without high frequency. Plasma cutting power source comes with CEBORA CP 95C 6m long hand torch, art no. 1212 with work return lead (6m-10mm2) with clamp.

Technical Specifications: Three Phase Input: 230 / 400 V, 50 Hz Max. Installed Power: 6 KW Input Power: 8.4 KVA Current Settings: 35 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 (30 % - 35 A) No. of Regulation Step: 1 Thickness on Steel: Stand, Max (Severance) 8-10(12) mm 1/3” – 3/8” (1/2”) Torch Length: 6 mt. (18 ft.) Air Consumption: 140 lt/min, 4.7 bar Protection Class: IP 21C Net Weight: 46 Kg. Dimensions: 449 x 388 x 635 H 2) PLASMA PROF 55 965 Plasma cutting power source high frequency ignition.

Plasma cutting power source comes with CEBORA CP 91 6m long hand torch, art no. 1215 with work return lead (6m 16mm2) with clamp.

Technical Specifications:

Three Phase Input: 230 / 400 V, 50 Hz Max. Installed Power: 10 KW Input Power: 13.1 KVA 40% Current Settings: 50 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 (40 % - 50 A) No. of Regulation Step: 1 Thickness on Steel: Stand, Max (Severance) 12 – 15 (20) mm ½” – 5/8” (7/8”) Torch Length: 6 mt. (18 ft.) Air Consumption: 140 lt/min, 4.7 bar Protection Class: IP 21C Net Weight: 63.5 Kg. Dimensions: 514 x 560 x 772 H


Page no.2 of 32




SR. PRODUCT MODEL NO NO.

3) PLASMA PROF 80 947

Electronic plasma cutting power source. High frequency ignition. Electronic type plasma cutting power source comes with CEBORA CP 91 MAR 6m hand torch art no. 1214 with work return lead (6m – 16mm2)


Three Phase Input: 230-400-415 / 440 V, 50/60 Hz

Max. Installed Power: 15 KW Input Power: 19.00 KVA 35% 14.30 KVA 60% 11.80 KVA 100% Current Range: 20 - 80 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 (80 A 35%) (60 A 60%) (50 A 100%) Step less Regulation: Electronic Thickness on Steel: Stand, Max (Severance) 20-25 (30) mm 7/8” – 1” (1” 1/8”) Torch Length: 6 mt. (18 ft.) Air Consumption: 150 lt/min – 4.7 bar Protection Class: IP 21C Net Weight: 85 Kg. Dimensions: 514 x 560 x 772 H

4) PLASMA PROF 122 946

Chopper plasma cutting power source. High frequency ignition Plasma cutting Chopper type power source comes with CEBORA CP 160 MAR 6m hand torch art no. 1226 with work return lead (6m – 25mm2) with clamp.


Three Phase Input: 220-380/400 V 415/440 V 50/60 Hz

Max. Installed Power: 19 KW Input Power: 21 KVA 60% 16 KVA 100% Current Range: 20 - 70 A 20 - 120 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 (120 A 60%) (95 A 100%) Step less Regulation: Electronic Max Thickness on Steel: 35 mm (1” ¼”) Torch Length: 6 mt. (18 ft.) Air Consumption: 220 lt/min – 5 bar Protection Class: IP 21 Net Weight: 120 Kg. Dimensions: 450 x 775 x 875 H


Page no.3 of 32




SR. PRODUCT MODEL NO NO. 5) PLASMA PROF 162 952 Chopper plasma cutting power source. High frequency ignition. Plasma cutting Chopper power source comes with work return lead (6m – 25mm2) with clamp without torch.

Technical Specifications: Three Phase Input: 220/230-380/400 V 415/440

50/60 Hz Max. Installed Power: 22 KW Input Power: 27 KVA 40% 22 KVA 60% 16 KVA 100% Current Range: 20 - 90 A 20 - 160 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 (160 A 40%) (120 A 60%) (95 A 100%) Step less Regulation: Electronic Max. Thickness on Steel: 40 mm (1”2/3”) Air Consumption: 220 lt/min, 5 bar Protection Class: IP 21 Net Weight: 144 Kg. Dimensions: 450 x 775 x 875 H 6) POWER PLASMA 3100 296 Inverter plasma cutting power source. High frequency ignition

Inverter plasma cutting power source comes with CEBORA CP40 4m hand torch art no. 1208 with work return lead (4m – 10mm2) with clamp. Technical Specifications:

Single Phase Input: 115/230 V – 50/60 Hz Max. Installed Power: 3.2 KW Input Power: 4.2 KVA 35% Current Range: 5 - 25 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 (25A 35%) Step less Regulation: Electronic Max. Thickness on Steel: 6-10 (12) mm ¼” – 3/8” (1/2”) Torch Length: 4 mt. (13 ft.) Air Consumption: 60 lt/min, 3.5 bar Protection Class: IP 23C Net Weight: 13 Kg. Dimensions: 150 x 357 x 382 H


Page no.4 of 32





7) PLASMA SOUND pc 6060/T 355

Multi voltage inverter plasma cutting power source. High frequency ignition. Inverter plasma cutting power source comes with CEBORA CP 91 MAR 6m hand torch art no. 1214 with work return lead (6m – 16mm2) with clamp.

Technical Specifications: Three Phase Input: 208-220-230 V 50/60 Hz 400-440 V 50/60 Hz Max. Installed Power: 6.9 KW Input Power: 8.0 KVA 30% 7.6 KVA 60% Current Range: 20 - 60 A Duty Cycle: 10 min. cycle 40oC

According to IEC60974.1 (60 A - 30%, 50 A – 60%,

40 A - 100%) (60 A – 60%, 50 A – 100%) Step less Regulation: Electronic Max. Thickness on Steel: 15-22 (28) mm 5/8” – 7/8” (1”-1/8”) Torch Length: 6 mt. (18 ft.) Air Consumption: 150 lt/min, 4.7 bar Protection Class: IP 23C Net Weight: 26 Kg. Dimensions: 286 x 515 x 406 H 8) PLASMA SOUND pc 10050/T 357

Multi voltage inverter plasma cutting power source. High frequency ignition. Inverter plasma cutting power source comes with CEBORA CP 160 MAR 6m hand torch art no. 1226 with work return lead (6m – 25mm2) with clamp.


Three Phase Input: 208-220-230 V 50/60 Hz 400-440 V 50-60 Hz Max. Installed Power: 10.30 KW 12.40 KW Input Power: 13.60 KVA 35% 16.50 KVA 50% Current Range: 20 - 80 A 20 - 100 A Duty Cycle: 10 min. cycle 40oC

According to IEC60974.1 (80 A – 35%, 65 A – 60%, 58 A – 100%) (100 A – 50%, 95 A – 60%, 85 A – 100%) Step less Regulation: Electronic Max. Thickness on Steel: 25/30 mm (35) 1”/1” – 3/16” (1” – 3/8”) Torch Length: 6 mt. (18 ft.) Air Consumption: 220 lt/min, 5 bar Protection Class: IP 23 Net Weight: 34 Kg. Dimensions: 297 x 504 x 558 H


Page no.5 of 32





9) POWER TIG 1540 DC HF 271

MMA and TIG welding inverter type DC power source. HF ignition. TIG and MMA welding inverter type DC power source with built in HF ignition. Comes without welding torch and cables. Technical Specifications:

Single Phase Input: 230 V 50/60 Hz TIG MMA Max. Installed Power: 3.30 KW 40% 4.60 KW 30% Input Power: 4.30 KVA – 40%, 6.00 KVA – 30%,

3.50 KVA – 60%, 4.60 KVA – 60%, 3.20 KVA – 100% 4.10 KVA – 100%

Current Range: 5 - 150 A 10 - 140 A Duty Cycle: 10 min. cycle 40oC

According to IEC60974.1 150 A – 40% 140 A – 30%

130 A – 60% 115 A – 60% 120 A – 100% 105 A – 100%

Protection Class: IP 23C Net Weight: 9.5 Kg. Dimensions: 172 x 390 x 340 H 10) POWER TIG 1665 DC HF 272

MMA and TIG welding pulse inverter type DC power source HF ignition. TIG and MMA welding inverter type DC power source built in HF ignition. Comes without welding torch and cables. Technical Specifications:

Single Phase Input: 230 V, 50/60 Hz TIG MMA Max. Installed Power: 3.90 KW 40% 4.80 KW 35% Input Power: 5.10 KVA 40% 6.20 KVA 35% 4.40 KVA 60% 5.50 KVA 60% 3.70 KVA 100% 4.80 KVA 100% Current Range: 5 - 160 A 10 - 140 A Duty Cycle: 10 min. cycle 40oC

According to IEC60974.1 160 A 40% 140 A 35% 145 A 60% 125 A 60% 130 A 100% 115 A 100% Protection Class: IP 23C Net Weight: 10.50 Kg. Dimensions: 176 x 370 x 402 H


Page no.6 of 32





11) POWER TIG 1965 DC HF 277

MMA and TIG welding pulse inverter type DC power source HF ignition. TIG and MMA welding inverter type DC power source with built in HF ignition. Comes without welding torch and cables.


Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: TIG MMA

4.20 KW 35% 3.90 KW 35% Input Power: 5.50 KVA 35%, 5.10 KVA 35% 4.50 KVA 60%, 4.50 KVA 60% 3.70 KVA 100%, 3.70 KVA 100% Current Range: 5 - 190 A 10 - 140 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 190 A 35%, 140 A 35% 160 A 60%, 125 A 60% 140 A 100%, 115 A 100% Protection Class: IP 23 C Net Weight: 11.70 Kg. Dimensions: 176 x 370 x 402 H 12) BI-WELDER TIG 1665 DC HF 278

MMA and TIG welding pulse inverter type DC power source. HF ignition. TIG and MMA welding inverter type DC power source with build in HF ignition. Comes without welding torch and cables.

Technical Specifications: TIG MMA Single Phase Input: 230 V 50/60 Hz, 230 V 50/60 Hz 115 V 50/60 Hz, 115 V 50/60 Hz Max. Installed Power: 3.90 KW 40% 4.80 KW 35% 3.30 KW 60% 4.20 KW 60% 2.80 KW 100% 3.70 KW 100% 3.40 KW 40% 3.50 KW 35% 2.90 KW 60% 2.60 KW 60% 2.50 KW 100% 1.90 KW 100% Input Power: 5.10 KVA 40% 6.20 KVA 35% 4.40 KVA 60% 5.50 KVA 60% 3.70 KVA 100% 4.80 KVA 100% 4.40 KVA 40% 4.30 KVA 35% 3.70 KVA 60% 3.70 KVA 60% 2.90 KVA 100% 2.80 KVA 100% Current Range: 5 - 160 A 10 - 140 A 5 - 160 A 10 - 110 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 TIG TIG MMA MMA

160 A 25% 160 A 40% 140 A 35% 110 A 35% 145 A 60% 140 A 60% 125 A 60% 90 A 60% 130 A 100% 110 A 100% 115 A 100% 75 A 100% Protection Class: IP 23 C Net Weight: 11 Kg. Dimensions: 176 x 370 x 402 H


Page no.7 of 32




SR. PRODUCT MODEL NO NO. 13) TIG SOUND DC 2340/T 339 Multi voltage MMA and TIG welding pulse inverter type DC power source. HF ignition

TIG and MMA welding inverter type DC power source with built in HF ignition. Can be connected to the optional cooling unit. Comes without cooling unit , welding torch and cables. Technical Specifications:

TIG MMA Three Phase Input: 208-220-230 V 50/60 Hz 208-220-230 V 50/60 Hz 400-440 V 50/60 Hz 400-440 V 50/60 Hz Max. Installed Power: 5.00 KW 6.60 KW 4.50 KW 6.00 KW Input Power: 5.70 KVA 25% 7.50 KVA 30% 5.70 KVA 40% 7.00 KVA 60% Current Range: 5 - 230 A 10 - 210 A 5 - 230 A 10 - 210 A Duty Cycle: 10 min. cycle 40oC


230 A 40% 230 A 40% 210 A 35% 180 A 60% 210 A 60% 150 A 60% 210 A 60% 140 A 100% 180 A 100% 120 A 100% 150 A 100% Protection Class: IP 23 C Net Weight: 16 Kg. Dimensions: 207 x 437 x 411 H 14) TIG SOUND DC 3240/T 341 Multi voltage MMA and TIG welding pulse inverter type DC power source. HF ignition.

Inverter based DC TIG and MMA welding power source with high frequency. Comes with cooling unit and trolley for transportation of the power source. Without torch and welding cables. Technical Specifications:

TIG MMA Three Phase Input: 208-220-230 V 50/60 Hz 208-220-230 V 50/60 Hz 400-440 V 50/60 Hz 400-440 V 50/60 Hz Max. Installed Power: 6.50 KW 7.70 KW 6.90 KW 8.30 KW Input Power: 7.80 KVA 35% 9.30 KVA 35% 9.60 KVA 40% 11.50 KVA 40% Current Range: 5 - 280 A 10 - 240 A 5 - 320 A 10 - 280 A Duty Cycle: 10 min. cycle 40oC


280 A 35% 320 A 40% 240 A 35% 280 A 40% 245 A 60% 280 A 60% 200 A 60% 240 A 60% 220 A 100% 250 A 100% 180 A 100% 210 A 100% Protection Class: IP 23 C Net Weight: 79.5 Kg. Dimensions: 705 x 1060 x 975 H


Page no.8 of 32




SR. PRODUCT MODEL NO NO. 15) TIG SOUND AC-DC 1530/M 345 Inverter type pulse AC-DC TIG welding power source. HF ignition and DC MMA welding.

TIG and MMA welding inverter type AC-DC power source with built in HF ignition. Comes without welding torch and cables.


Single Phase Input: 230 V 50/60 Hz TIG MMA Max. Installed Power: 3.90 KW 30% 4.40 KW 30% Input Power: 5.00 KVA 30% 5.70 KVA 30% 3.60 KVA 60% 4.20 KVA 60% 3.20 KVA 100% 3.70 KVA 100% Current Range: 5 - 150 A 10 - 130 A Duty Cycle: 10 min. cycle 40oC

According to IEC60974.1 150 A 30% 130 A 30% 110 A 60% 100 A 60% 100 A 100% 90 A 100%

Protection Class: IP 23 Net Weight: 16.70 Kg. Dimensions: 172 x 390 x 340 H 16) TIG SOUND AC-DC 2030/M 346 MMA and TIG welding pulse inverter type AC-DC power source. HF ignition.

TIG and MMA welding inverter type AC-DC power source with built in HF ignition. Can be connected to the optional cooling unit. Comes without cooling unit, welding torch and cables. Technical Specifications:

Single Phase Input: 230 V 50/60 Hz TIG MMA Max. Installed Power: 4.70 KW 30% 3.40 KW 60% 3.10 KW 100% 4.40 KW 100% Input Power: 6.20 KVA 30% 4.50 KVA 60% 4.10 KVA 100% 5.70 KVA 100% Current Range: 5 - 200 A 10 - 140 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 200 A 30% 160 A 60% 150 A 100% 140 A 100%

Protection Class: IP 23 Net Weight: 16.50 Kg. Dimensions: 207 x 437 x 411 H


Page no.9 of 32




SR. PRODUCT MODEL NO NO. 17) TIG SOUND AC-DC 2643/T 351 MMA and TIG welding pulse inverter type AC-DC power source. HF ignition.

Inverter based AC-DC TIG and MMA welding power source with high frequency. Can be connected to the optional cooling unit. Comes with trolley for transportation of the power source. Without cooling unit, torch and welding cables. Technical Specifications:

Three Phase Input: 400 V 50/60 Hz TIG MMA Max. Installed Power: 4.80 KVA 40% 5.30 KVA 40% 4.60 KVA 60% 5.10 KVA 60% 4.20 KVA 100% 4.70 KVA 100% Input Power: 6.60 KVA 40% 7.30 KVA 40% 6.30 KVA 60% 7.00 KVA 60% 5.80 KVA 100% 6.50 KVA 100% Current Range: 5 - 260 A 10 - 210 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 260 A 40% 210 A 40% 240 A 60% 200 A 60% 230 A 100% 190 A 100%

Protection Class: IP 23 Net Weight: 65 Kg. Dimensions: 705 x 1060 x 975 H 18) TIG SOUND AC-DC 3340/T 352 MMA and TIG welding pulse inverter type AC-Dc power inverter source. HF ignition.

Inverter based AC-DC TIG and MMA welding power source with high frequency. Comes with cooling unit and trolley for transportation of the power source. Without torch and welding cabls. Technical Specifications:

Three Phase Input: 400 V 50/60 Hz TIG MMA Max. Installed Power: 7.50 KVA 40% 11.00 KVA 40% 7.30 KVA 60% 10.70 KVA 60% 7.00 KVA 100% 10.30 KVA 100% Input Power: 10.40 KVA 40% 14.50 KVA 40% 10.10 KVA 60% 14.00 KVA 60% 9.70 KVA 100% 13.50 KVA 100% Current Range: 5 - 330 A 10 - 330 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 330 A 40% 330 A 40% 320 A 60% 320 A 60% 310 A 100% 310 A 100%

Protection Class: IP 23 Net Weight: 93 Kg. Dimensions: 705 x 1060 x 975 H


Page no.10 of 32




SR. PRODUCT MODEL NO NO. 19) TIG SOUND AC-DC 4560/T 353 MMA and TIG welding pulse inverter type AC-Dc power source. HF ignition

Inverter based AC-Dc TIG and MMA welding power source with high frequency. Comes with cooling unit and trolley for transportation of the power source. Without torch and welding cables. Technical Specifications:

Three Phase Input: 400 V 50/60 Hz TIG MMA Max. Installed Power: 12.50 KVA 60% 12.00 KVA 60% 9.50 KVA 100% 10.50 KVA 100% Input Power: 16.00 KVA 60% 15.00 KVA 60% 12.50 KVA 100% 13.50 KVA 100% Current Range: 5 - 450 A 10 - 360 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 450 A 60% 360 A 60% 380 A 100% 320 A 100%

Protection Class: IP 23 C Net Weight: 136 Kg. Dimensions: 705 x 1060 x 1155 H 20) ROD WELD 307 cell 1753 MMA and TIG welding DC power source DC power source for MMA welding. Comes without welding cables.

Technical Specifications: Three Phase Input: 230/400 V 50 Hz Max. Installed Power: 13.90 KW Input Power: 18 KVA 35% 13.50 KVA 60% 10.70 KVA 100% Current Range: 45 - 250 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 250 A 35% 175 A 60% 135 A 100% Stepless Regulation: Manual Open Circuit Voltage: 69 - 77 VDC Electrodes That Can be used: ø 2 - 6 Protection Class: IP 21 Net Weight: 95 Kg. Dimensions: 627 x 1016 x 670 H

SUITABLE FOR CELLULOSIC COATED ELECTRODE


Page no.11 of 32




SR. PRODUCT MODEL NO NO. 21) ROD WELD 407 cell 1756 MMA and TIG welding DC power source DC power source for MMA welding. Comes without welding cables.

Technical Specifications: Three Phase Input: 230/400 V 50 Hz Max. Installed Power: 19 KW Input Power: 24.90 KVA 35% 19.40 KVA 60% 15.20 KVA 100% Current Range: 55 - 350 A Duty Cycle: 10 min. cycle 40oC


SUITABLE FOR CELLULOSIC COATED ELECTRODE 22) ROD WELD 507 cell 1759 MMA and TIG welding DC power source DC power source for MMA welding. Comes without welding cables.

Technical Specifications: Three Phase Input: 230/400 V 50 Hz Max. Installed Power: 25 KW Input Power: 32.90 KVA 35% 24.30 KVA 60% 19.00 KVA 100% Current Range: 65 - 450 A Duty Cycle: 10 min. cycle 40oC




Page no.12 of 32




SR. PRODUCT MODEL NO NO. 23) POWER ROD 130 251 MMA and TIG inverter type DC welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source. Antishock plastic housing with shoulder strap. Comes without welding cable.

Technical Specifications: Single Phase Input: 230 V 50/60 Hz Max. Installed Power: 4.30 KW Input Power: 5.70 KVA 25% 4.40 KVA 60% 3.70 KVA 100% Current Range: 10 - 130 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 130 A 25% 100 A 60% 90 A 100% Electrodes That Can be used: ø 1.50 - 3.20 Protection Class: IP 23 Net Weight: 4.50 Kg. Dimensions: 160 x 302 x 292 H 24) POWER ROD 1365 252 MMA and TIG inverter type DC welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source. Comes without welding cables.


According to EN60974.1 130 A 35% 115 A 60% 105 A 100% Electrodes That Can be used: ø 1.50 - 4.00 Protection Class: IP 23 C Net Weight: 7.30 Kg. Dimensions: 172 x 370 x 340 H


Page no.13 of 32




SR. PRODUCT MODEL NO NO. 25) BI WELDER 1365 254 MMA and TIG inverter type DC welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source. Comes without welding cables.

Technical Specifications: TIG MMA Single Phase Input: 115 V 50/60 Hz 230 V 50/60 Hz Max. Installed Power: 3.50 KW 4.30 KW Input Power: 4.30 KVA 35% 5.80 KVA 35% 3.70 KVA 60% 5.10 KVA 60% 2.80 KVA 100% 4.40 KVA 100% Current Range: 10 - 110 A 10 - 135 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 110 A 35% 130 A 35% 90 A 60% 115 A 35% 75 A 100% 105 A 35% Electrodes That Can be used: ø 1.50 - 4.00 Protection Class: 23 C Net Weight: 7.30 Kg. Dimensions: 172 x 370 x 340 H 26) POWER ROD 1565 253 MMA and TIG inverter type welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source. Comes without welding cables.




Page no.14 of 32




SR. PRODUCT MODEL NO NO. 27) POWER ROD 1565 cell 255 MMA and TIG inverter type DC welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source. Comes without welding torch and cables.



SUITABLE FOR CELLULOSIC COATED ELECTRODE 28) SOUND MMA 2335/T 330 MMA and TIG inverter type DC welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source

Technical Specifications: Three Phase Input: 400 V 50/60 Hz Max. Installed Power: 6.00 KW Input Power: 8.30 KVA 35% 6.90 KVA 60% 6.00 KVA 100% Current Range: 10 - 230 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 230 A 35% 210 A 60% 190 A 100% Electrodes That Can be used: ø 1.50 - 4.00 Protection Class: IP 23 Net Weight: 15.70 Kg. Dimensions: 207 x 437 x 411 H


Page no.15 of 32




SR. PRODUCT MODEL NO NO. 29) SOUND MMA 2335/T MV cell 331 Multi voltage MMA TIG inverter type DC welding power source. Cebora lift ignition

Multi voltage MMA and TIG inverter type DC welding power source. Can be used with motor generators. Comes without welding cables. Technical Specifications:

Three Phase Input: 208/220/230/400/440 V 50/60 Hz Max. Installed Power: 6.00 KW Input Power: 8.30 KVA 35% 6.90 KVA 60% 6.20 KVA 100% Current Range: 10 - 230 A Duty Cycle: 10 min. cycle 40oC


SUITABLE FOR CELLULOSIC COATED ELECTRODE 30) SOUND MMA 3535/T cell 333 MMA and TIG inverter type DC welding power source. Cebora lift ignition MMA and TIG inverter type DC welding power source. Comes without welding cable.

Technical Specifications: Three Phase Input: 400 V 50/60 Hz Max. Installed Power: 10.9 KW Input Power: 14.40 KVA 35% 10.00 KVA 60% 8.00 KVA 100% Current Range: 10 - 350 A Duty Cycle: 10 min. cycle 40oC




Page no.16 of 32




SR. PRODUCT MODEL NO NO. 31) REVOLUTION COMBI 488 Gas / No Gas welding machine

Portable solid and flux-cored wire welding machine. Comes with 2m Cebora torch, work return lead (2.3m – 8.3mm2), clamp, hatchet and mask. Without flow meter. Technical Specifications:

Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 3 KW Input Power: 3.70 KVA max Min – Max Current that can be obtained in welding: 35 A - 130 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 90 A 20% No. of Regulation Step: 1 x 4 Wire Size that can be used: Solid: ø 0.60 mm/ 0.80 mm Cored: ø 0.9 mm Max Wire Spool Size: ø 200mm / 5 Kg Protection Class: IP 21 Net Weight: 22.5 Kg. Dimensions: 302 x 453 x 340 H 32) BRAVO 155 combi 494 MIG – MAG welding machine

Compact welding machine with two roll-wire feeder. Comes with 3m Cebora torch with direct connection, work return lead (2.3m – 16mm2) and clamp. Without flow-meter. Technical Specifications:

Single Phase Input: 220 V, 50/60 Hz Max. Installed Power: 3.80 KW Input Power: 4.80 KVA 20% 2.10 KVA 60% Min – Max Current that can be obtained in welding: 28 A Min, 155 A Max Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 120 A 20% 70 A 60% 55 A 100% No. of Regulation Step: 1 x 7 Wire Size that can be used: Solid: ø 0.60 mm / 0.80 mm Cored: ø 0.9 mm / 1.20 mm Max Wire Spool Size: ø 200mm / 5 Kg Protection Class: IP 21 Net Weight: 29 Kg. Dimensions: 395 x 690 x 531 H


Page no.17 of 32




SR. PRODUCT MODEL NO NO. 33) BRAVO combi MIG 2020/M 574.11

Compact MIG-MAG welding machine Compact welding machine for solid and flux cored wire, with two roll-wire feeder in aluminum. Comes with work return lead (3m – 16mm2) and clamp. With spot welding timer, without torch and flow meter. Technical Specifications:

Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 4.40 KW Input Power: 5.70 KVA 20% 2.30 KVA 60% Min – Max Current that can be obtained in welding: 25 A Min, 200 A Max Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 150 A 20% 90 A 60% 70 A 100% No. of Regulation Step: 1 x 7 Wire Size that can be used: Solid: ø 0.60 mm / 0.80 mm / 1.00mm Cored: ø 0.9 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 51 Kg. Dimensions: 515 x 820 x 660 H 34) BRAVO combi MIG 2235/T 575.11 Compact MIG-MAG welding machine

Compact welding machine for solid and flux cored wire with two roll-wire feeder in aluminum. Comes with work return lead (3m – 16mm2) and clamp. With spot welding timer. Without torch and flow-meter. Technical Specifications:

Three Phase Input: 230/400 V, 50/60 Hz Max. Installed Power: 4.50 KW Input Power: 6.00 KVA 35% 4.60 KVA 60% Min – Max Current that can be obtained in welding: 15 - 220 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 170 A 35% 130 A 60% 100 A 100% No. of Regulation Step: 1 x 7 Wire Size that can be used: Solid: ø 0.60 mm / 0.80 mm / 1.00mm Cored: ø 0.9 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 53.5 Kg. Dimensions: 515 x 820 x 660 H


Page no.18 of 32




SR. PRODUCT MODEL NO NO. 35) BRAVO MIG 2525/M 590.11 Compact MIG-MAG welding machine

compact welding machine with two roll-wire feeder in aluminum. Comes with work return lead (3.5m – 25mm2) and clamp. Without torch and flow meter. Technical Specifications:

Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 6.50 KW Input Power: 8.70 KVA 25% Min – Max Current that can be obtained in welding: 25 - 250 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 200 A 25% 130 A 60% 100 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Solid: ø 0.60 mm / 0.80 mm / 1.00mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 55.5 Kg. Dimensions: 542 x 915 x 795 H 36) BRAVO MIG 2540/T 591.11 Compact MIG-MAG welding machine

Compact welding machine with two roll-wire feeder in aluminum. Comes with work return lead (3.5m – 25mm2) and clamp. With spot welding timer. Without torch and flow-meter.


Three Phase Input: 230/400 V, 50/60 Hz Max. Installed Power: 5.20 KW Input Power: 6.90 KVA 40% Min – Max Current that can be obtained in welding: 15 - 250 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 200 A 40% 150 A 60% 125 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Solid: ø 0.60 / 0.80 / 1.00 / 1.20mm Cu-Si 3%: 0.80 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 76 Kg. Dimensions: 542 x 915 x 795 H


Page no.19 of 32





37) BRAVO MIG 3040/T 593.11

Compact MIG-MAG welding machine Compact welding machine with two roll-wire feeder in aluminum. Comes with work return lead (3.5m – 35mm2) and clamp. With spot welding timer. Without torch and flow-meter. Technical Specifications:

Three Phase Input: 230/400 V, 50/60 Hz Max. Installed Power: 9.00 KW Input Power: 11.20 KVA 40% Min – Max Current that can be obtained in welding: 25 - 300 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 250 A 40% 200 A 60% 160 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Solid: ø 0.60 / 0.80 / 1.00 / 1.20mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 80 Kg. Dimensions: 542 x 915 x 795 H 38) BRAVO Synergic combi MIG 2020/M 572

MIG-MAG manual synergic welding machine Compact single phase manual synergic MIG-MAG and flux-cored wire welding machine with two-roll wire feeder in aluminum , digital control panel with ammeter and stored synergic curves (aluminum, mild and stainless steel), post-gas, soft start adjustment, spot/stitch welding time and burn back adjustment. Comes with work return lead (3m – 16mm2) and clamp. Without torch and flow-meter.


Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 4.40 KW Input Power: 5.70 KVA 20% Min – Max Current that can be obtained in welding: 25 - 200 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 150 A 20% 90 A 60% 70 A 100% No. of Regulation Step: 1 x 7 Wire Size that can be used: Fe-Inox: ø 0.60 / 0.80 mm AL: ø 0.60 / 0.80 / 1.00 mm Cored: ø 0.90 mm Cu-Si 3%: ø 0.80 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 51.00 Kg. Dimensions: 515 x 820 x 660 H


Page no.20 of 32





39) BRAVO Synergic combi MIG 2235/T 573

MIG-Mag manual synergic welding machine Compact three phase manual synergic machine with two roll wire feeder in aluminum, digital control panel with ammeter and stored synergic curves (aluminum, mild and stainless steel), post-gas, soft start adjustment, spot/stitch welding time and burn back adjustment. Comes with work burn back adjustment, comes with work return back adjustment. Comes with work return lead (3m – 16mm2) and clamp. Without torch and flow-meter.

Technical Specifications: Three Phase Input: 230/400 V, 50/60 Hz Max. Installed Power: 4.50 KW Input Power: 6.00 KVA 35% 4.60 KVA 60% Min – Max Current that can be obtained in welding: 15 - 220 A Duty Cycle: 10 min. cycle 40

oC

According to EN60974.1 170 A 35% 130 A 60% 100 A 100% No. of Regulation Step: 1 x 7 Wire Size that can be used: Fe-Inox: ø 0.60 / 0.80 mm AL: ø 0.60 / 0.80 / 1.00 mm Cored: ø 0.90 mm Cu-Si 3%: ø 0.80 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 53.50 Kg. Dimensions: 515 x 820 x 660 H 40) BRAVO Synergic MIG 2525/M 576

MIG-MAG manual synergic machine Compact single phase manual synergic MIG-MAG welding machine with two roll wire feeder in aluminum, digital control panel with ammeter and stored synergic curves (aluminum, mild and stainless steel), post-gas, soft start adjustment, spot/stitch welding time and burn back adjustment. Comes with work return lead (3.5m – 25mm2) and clamp. Without torch and flow-meter.


Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 6.50 KW Input Power: 8.70 KVA 25% Min – Max Current that can be obtained in welding: 25 - 250 A Duty Cycle: 10 min. cycle 40

oC

According to EN60974.1 200 A 25% 130 A 60% 100 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Fe: ø 0.60 / 0.80 / 1.00 mm AL: ø 0.60 / 0.80 / 1.00 mm Inox: ø 0.60 / 0.80 / 1.00 mm Cu-Si 3%: ø 0.80 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 58.50 Kg. Dimensions: 542 x 915 x 795 H


Page no.21 of 32





41) BRAVO Synergic multiweld MIG 2540/T 577

MIG-MAG manual synergic welding and GMA brazing machine Compact three phase manual synergic MIG-MAG welding machine with two roll wire feeder in aluminum, digital control panel with ammeter and stored synergic curves (aluminum, galvanized sheet GMA brazing, mild and stainless steel), post-gas, soft start adjustment, spot/stitch welding time and burn back adjustment. Comes with work return lead (3.5m – 25mm2) with clamp. Without torch and gas regulator.


Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 5.20 KW Input Power: 6.90 KVA 40% Min – Max Current that can be obtained in welding: 15 - 250 A Duty Cycle: 10 min. cycle 40

oC

According to EN60974.1 200 A 40% 160 A 60% 125 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Fe-Inox: ø 0.60 / 0.80 / 1.00 mm AL: ø 0.60 / 0.80 / 1.00 mm Cu-Si 3%: ø 0.80 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 76 Kg. Dimensions: 542 x 915 x 795 H 42) BRAVO Synergic MIG 3040/T 579 MIG-MAG manual synergic welding machine

Compact three phase manual synergic MIG-MAG welding machine with two roll wire feeder in aluminum, digital control panel with ammeter and stored synergic curves (aluminum, mild and stainless steel), post-gas, soft start adjustment, spot/stitch welding time and burn back adjustment. Comes with work return lead (3.5m -35mm2) with clamp. Without torch and gas regulator. Technical Specifications:


oC

According to EN60974.1 250 A 40% 200 A 60% 160 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Fe: ø 0.60 / 0.80 / 1.00 / 1.20 mm AL: ø 0.60 / 0.80 / 1.00 / 1.20 mm Inox: ø 0.60 / 0.80 / 1.00 / 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 80 Kg. Dimensions: 542 x 915 x 795 H


Page no.22 of 32





43) BRAVO Synergic MIG 3840/T 581

MIG-MAG manual welding machine Compact three phase manual synergic MIG-MAG welding machine with four roll wire feeder in aluminum, digital control panel with ammeter and stored synergic curves (aluminum, mild and stainless steel) post-gas, soft start adjustment, stop/stitch welding time and burn back adjustment. Comes with work return lead (3.5 m – 35mm2) with clamp. Without torch and gas regulator.



oC

According to EN60974.1 330 A 40% 270 A 60% 210 A 100% No. of Regulation Step: 2 x 8 Wire Size that can be used: Fe: ø 0.60 / 0.80 / 1.00 / 1.20 mm AL: ø 0.60 / 0.80 / 1.00 / 1.20 mm Inox: ø 0.60 / 0.80 / 1.00 / 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 90 Kg. Dimensions: 542 x 915 x 795 H 44) BRAVO Synergic MIG 4540/T 597

MIG-MAG manual synergic welding machine Manual / synergic three phase power source for MIG/MAG welding in compact version, with four roll Cebora wire feeder in aluminum, digital control panel with ammeter / voltmeter, stored synergic curves (aluminum, mild and stainless steel), post-gas and soft start adjustment, stop/stitch welding time and burn back adjustment , 2/4 times, timer operated fan. Ready for water cooled torch. Comes with work return lead (3.5m – 50mm2) without torch.

Technical Specifications: Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 18.50 KW Input Power: 19.50 KVA 40% Min – Max Current that can be obtained in welding: 40 - 450 A Duty Cycle: 10 min. cycle 40

oC

According to EN60974.1 400 A 40% 330 A 60% 260 A 100% No. of Regulation Step: 4 x 8 Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 / 1.60 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 138 Kg. Dimensions: 615 x 975 x 900 H


Page no.23 of 32




SR. PRODUCT MODEL NO NO. 45) MIG WELD 263 S 543 MIG-MAG welding machine

MIG-MAG welding power source with two roll aluminum separate wire feeder. Comes with 5m long extension lead between generator and wire feeder, work return lead (3.5m – 35mm2) and clamp. Without flow-meter, without torch. Technical Specifications:

Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 9.00 KW Input Power: 11.20 KVA 40% Min – Max Current that can be obtained in welding: 25 - 300 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 250 A 40% 200 A 60% 160 A 100% No. of Regulation Step: 2 x 6 Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 Net Weight: 95 Kg. Dimensions: 405 x 940 x 1160 H 46) BRAVO Synergic MIG 3840/TS 613 MIG-MAG manual synergic welding machine

Manual / synergic three phase power source for MIG-MAG welding, with timer operated fan. Comes work return lead (3.5m – 35mm2) and clamp. Without torch, wire feed unit and extension lead.


Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 12 KW Input Power: 16 KVA 40% Min – Max Current that can be obtained in welding: 38 - 380 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 330 A 40% 270 A 60% 210 A 100% No. of Regulation Step: 2 x 8 Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 Net Weight: 85 Kg. Dimensions: 615 x 975 x 900 H


Page no.24 of 32




SR. PRODUCT MODEL NO NO. 47) BRAVO Synergic MIG 4540/TS 615 MIG-MAG manual synergic welding machine

Manual / synergic three phase power source for MIG/MAG welding, with timer operated fan. Comes with work return lead (3.5m – 50mm2) and clamp. Without torch, wire feed unit and extension lead.


Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 15 KW Input Power: 19.50 KVA 40% Min – Max Current that can be obtained in welding: 40 - 450 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 400 A 40% 330 A 60% 260 A 100% No. of Regulation Step: 4 x 8 Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 / 1.60 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 21 C Net Weight: 118 Kg. Dimensions: 615 x 975 x 900 H 48) BRAVO Synergic MIG 4750/TS 617 MIG-MAG manual synergic welding machine

Manual / synergic three phase power source for MIG/MAG welding, with timer operated fan. Comes with work return lead (3.5m – 95mm2) and clamp. Without torch, wire feed unit and extension lead. Technical Specifications:

Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 16 KW Input Power: 21.50 KVA 40% Min – Max Current that can be obtained in welding: 40 - 470 A Duty Cycle: 10 min. cycle 40oC



Page no.25 of 32





49) BRAVO Synergic MIG 5550/TS 619

MIG-MAG manual synergic welding machine Manual / synergic three phase power source for MIG/MAG welding, with timer operated fan. Comes with work return lead (3.5m – 95mm2) and clamp. Without torch, wire feed unit and extension lead.


Three Phase Input: 230 / 400 V, 50/60 Hz Max. Installed Power: 22 KW Input Power: 27 KVA 50% Min – Max Current that can be obtained in welding: 40 - 550 A Duty Cycle: 10 min. cycle 40oC


50) TRI STAR MIG 1635/M 283

Inverter multipurpose single phase power source for MIG/MAG, DC TIG and MMA welding Multipurpose single phase power source (inverter technology) for MIG/MAG, DC TIG (with Cebora lift ignition) and MMA welding with two roll wire feeder and stored synergic curves for MIG/MAG welding, electronic controlled of chock value, spot welding time and pause time. Comes with 3m Cebora MIG welding torch art no. 1275 and work return lead (3m – 16mm2) without flow meter, MMA welding cables and TIG welding torch.


Three Phase Input: 230 V, 50/60 Hz MIG/MAG DC TIG MMA

Max. Installed Power: 5.00 KW 3.90 KW 4.80 KW Input Power: 6.70 KVA 5.10 KVA 6.20 KVA Current Range: 15 - 160 A 5 - 160 A 10 - 130 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 160 A 35% 160 A 35% 130 A 45% 120 A 60% 120 A 60% 115 A 60% 100 A 100% 100 A 100% 100 A 100% Wire Size that can be used: Fe: ø 0.60 mm --- ---

0.80 mm 1.00 mm

AL: ø 1.00 mm --- --- Inox: ø 0.80 mm CuSi 3%: ø 0.80 mm --- Cored: ø 0.90 mm --- Max Wire Spool Size: --- --- ø 200mm / 5 Kg Electrode that can be used: ø 1.50 mm / 3.25 mm Stepless Regulator: Electronic Protection Class: IP 23 Net Weight: 12.50 Kg. Dimensions: 207 x 437 x 411 H


Page no.26 of 32





51) SOUND MIG 4000/T Synergic 290

Inverter based multiprocess power source for MIG_MAG, TIG and MMA welding Inverter based power source for MIG/MAG, DC TIG (with Cebora lift ignition) and MMA welding. Comes with control panel, wire feed unit with four roll aluminum wire feed block, cooling unit, trolley for transportation of the power source and earth cables (3.5 m – 50mm2). Without torch and extension lead between power source and wire feed unit.


Three Phase Input: 400 V, 50/60 Hz Max. Installed Power: 12 KW Input Power: 16.70 KVA 40% 13.20 KVA 60% 11.70 KVA 100% Min – Max Current that can be obtained in welding: 20 - 400 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 400 A 40% 340 A 60% 310 A 100% Stepless Regulation: Electronic Wire Size that can be used: Solid: ø 0.80 / 1.00 mm Cored: ø 1.00 / 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 23 C Weight of the power source: 99 Kg. Dimensions of the power source: 705 x 1060 x 1380 H

52) SOUND MIG 5000/T Synergic 293

Inverter based multiprocess power source for MIG-MAG, TIG and MMA welding Inverter based power source for MIG/MAG, DC TIG (with Cebora lift ignition) welding. Comes with control panel, wire feed unit with four roll aluminum wire feed block, cooling unit, trolley for transportation of the power source and earth cable (3.5m – 90mm2). Without torch and extension lead between power source and wire feed unit.


Three Phase Input: 400 V, 50/60 Hz Max. Installed Power: 20.00 KW Input Power: 25.00 KVA 40% 21.00 KVA 60% 19.50 KVA 100% Min – Max Current that can be obtained in welding: 20 - 500 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 500 A 40% 450 A 60% 430 A 100% Stepless Regulation: Electronic Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 / 1.60 mm Cored: ø 2.40 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 23 C Weight of the power source: 113 Kg. Dimensions of the power source: 705 x 1060 x 1380 H


Page no.27 of 32





53) SOUND MIG Synergic 4000/T SHIPYARD 290.11 Unita trainafilo Wire feed unit

Inverter power source for MIG-MAG and MMA welding Inverter power source for MIG/MAG and MMA welding. comes with trolley for transportation of of the power source and earth cable (3.5m – 50mm2) without cooling unit, torch, wire feed unit and extension lead.



According to EN60974.1 400 A 40% 340 A 60% 310 A 100% Stepless Regulation: Electronic Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 mm Cored: ø 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 23 C Weight of the power source: 99 Kg. Dimensions of the power source: 705 x 1060 x 1380 H 54) SOUND MIG Synergic 5000/T SHIPYARD 293.11

Unita trainafilo Wire feed unit

Inverter power source for MIG_MAG and MMA welding Inverter power source for MIG/MAG and MMA welding. Comes with trolley for transportation of the power source and earth cable (3.5m – 50mm2). Without cooling unit, torch, wire feed unit and extension lead.





Page no.28 of 32





55) SOUND MIG 2035/M PULSE 285

MIG-MAG welding single phase power source (Inverter Technology) PULSED MIG/MAG welding single phase power source (inverter technology), with two roll wire feed unit in aluminum, with manual / synergic control panel with stored curve, electronic control of chock value, spot welding time and pause time. Comes with work return lead (3m – 25mm2) and clamp. comes without torch.


Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 5.50 KW Input Power: 7.40 KVA max Min – Max Current that can be obtained in welding: 15 - 200 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 200 A 35% 160 A 60% 145 A 100% Stepless Regulation: Electrode Wire Size that can be used: Fe-Inox: ø 0.60 / 0.80 / 1.00 mm AL: ø 0.60 / 0.80 / 1.00 / 1.20 mm Cu-Si 3%: ø 0.80 / 1.00 mm Cu-Al 8%: ø 0.80 / 1.00 mm Max Wire Spool Size: ø 200mm / 5 Kg ø 300mm / 15 Kg Protection Class: IP 23 C Net Weight: 20 Kg. Dimensions: 260 x 458 x 471 H

56) SOUND MIG 2035/MD Double Pulse 286

MIG-MAG welding single phase power source (Inverter Technology) Double Pulse MIG-MAG welding single phase power source (Inverter Technology) with two roll wire feed unit in aluminum, with manual / synergic control panel with stored curves, electronic control of chock valve, spot welding time and pause time. Can be connected to the optional cooling unit. Comes with work return lead (3m – 25mm2) and clamp. comes without cooling unit and welding torch.

Technical Specifications: Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 5.50 KW Input Power: 7.40 KVA max Min – Max Current that can be obtained in welding: 15 - 200 A Duty Cycle: 10 min. cycle 40oC



Page no.29 of 32





57) JAGUAR DOUBLE PULSE 2035/MD 282

MIG-MAG welding single phase power source (Inverter Technology) with two spool Double Pulse MIG/MAG welding single phase power source (Inverter Technology) with two wire feed unit in aluminum (Two Roller), with manual / synergic control panel with stored curves, electronic control of chock value, spot welding time and pause time. Trolley for transportation of the power source. Can be connected to the optional cooling unit. Comes with work return lead (3m – 25mm2) and clamp. comes without cooling unit and welding torch.


Single Phase Input: 230 V, 50/60 Hz Max. Installed Power: 5.50 KW Input Power: 7.40 KVA max Min – Max Current that can be obtained in welding: 15 - 200 A Duty Cycle: 10 min. cycle 40oC


58) SOUND MIG 3240/T PULSE 294

Inverter based multiprocess power source for MIG-MAG, TIG and MMA welding Inverter based power source for MIG/MAG, PULSE MMA and DC TIG (with Cebora lift ignition) welding. Comes with controlled panel, with wire feed unit in aluminum (four roll), trolley for transportation of the power source and earth cable (3.5m – 35mm2). Without cooling unit.

Technical Specifications: Three Phase Input: 400 V, 50/60 Hz Max. Installed Power: 10.50 KW Input Power: 11.50 KVA 40% 9.50 KVA 60% 8.00 KVA 100% Min – Max Current that can be obtained in welding: 5 - 320 A Duty Cycle: 10 min. cycle 40oC

According to EN60974.1 320 A 40% 280 A 60% 250 A 100% Stepless Regulation: Electronic Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 mm Cored: ø 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 23 C Weight of the power source: 80 Kg. Dimensions of the power source: 590 x 1090 x 960 H


Page no.30 of 32





59) SOUND MIG 3840/T PULSE 287

Inverter based multiprocess power source for MIG-MAG, TIG and MMA welding Inverter based power source for MIG/MAG, PULSE. MMA and DC TIG (with Cebora lift ignition) welding. Comes with control panel, wire feed unit with four roll aluminum wire feed block, cooling unit, trolley for transportation of the power source and earth cable (3.5m – 50mm2). Without torch and extension lead between power source and wire feed unit. Technical Specifications:


According to EN60974.1 380 A 40% 340 A 60% 310 A 100% Stepless Regulation: Electronic Wire Size that can be used: Solid: ø 0.80 / 1.00 / 1.20 mm Cored: ø 1.20 mm Max Wire Spool Size: ø 300mm / 15 Kg Protection Class: IP 23 C Weight of the power source: 99 Kg. Dimensions of the power source: 705 x 1060 x 1380 H

60) SOUND MIG 5040/T D Double Pulse 289

Inverter based multiprocess power source for MIG-MAG, TIG and MMA welding Inverter based power source for MIG/MAG, DOUBLE PULSE, MMA and DC TIG (with Cebora lift ignition) welding. Comes with control panel, wire feed unit with four roll aluminum wire feed block, cooling unit, trolley for transportation of the power source and earth cable (3.5m – 95mm2). Without torch and extension lead between power source and wire feed unit.





Page no.31 of 32




SR. PRODUCT MODEL NO NO. 61) SPOOL GUN 1562 MIG-MAG welding gun for DIN 8559 spools. 200A 60% MIG/MAG welding gun with small size spool (DIN 8559) for aluminum, steel, iron.

Complete with: 0.5Kg spool of ǿ 1.00mm aluminum wire. Current nozzles of ǿ 0.60, 0.80, 1.00, 1.20mm. Gas nozzle, 2.00mm allen wrench.

62) SPOT 2500 2148 Multi Purpose spotter for body shops

Synchronous electronic regulation multipurpose power source. Comes with work return lead (2 m – 50mm2), cable with spot gun (2.5m – 50mm2), multipurpose slide hammer to be fitted on the gun, box with set of accessories and consumables.


Single Phase Input: 400 V, 50 Hz Max. Installed Power: 6 KW Fuse Rating: 10 A Current Range: 3000 A max Protection Class: IP 23 Net Weight: 30 Kg. Dimensions: 207 x 437 x 411 H


Page no.32 of 32




SR. PRODUCT MODEL NO NO. 63) POWER SPOT 5500 2153 Spotter for body shops

Single-phase capacitor discharge power source for welding riverts on all kind of sheet metal (iron, stainless steel, aluminum). Comes with gun, earth cable and accessories bag (wrench, rivert mandrels, synthetic steel wool, 1 conf. art no. 2318, 2333 and 2334).


Single Phase Input: 115 V 50/60 Hz 230 V 50/60 Hz Fuse Rating (Slow Blow): 16 A 10 A Energy Adjust Range: 50 - 1500 J Protection Class: 23 C Net Weight: 15 Kg. Dimensions: 176 x 370 x 401 H

SR. PRODUCT MODEL NO NO. 1) PLASMA PROF 37 C 961 TECHNICAL DETAIL.pdf · 2011. 6. 13. · 11) POWER...

Documents

Transcript of SR. PRODUCT MODEL NO NO. 1) PLASMA PROF 37 C 961 TECHNICAL DETAIL.pdf · 2011. 6. 13. · 11) POWER...