SR-1 - di-soric.com fileTwo-channel inputs for safety light curtains / -grids 1 Status output PNP...
1
209199 © di-soric | Subject to modifications | 25/12/19 | Page 1 (1) SR-1 Safety relay di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com TECHNICAL INFORMATION (typ.) +20°C, 24 V DC Characteristic parameters Type 4 (IEC/TS 61496-2), SILCL 3 (IEC 62061) PL e - Cat. 4 (EN ISO 13849-1) Mounting rail fastening according to EN 50022-35 standard Operating principle Safety relay Size 99 x 22.5 x 114.5 mm (Dimensions) Service voltage 19,2 ... 28,8 V DC Inverse polarity protection Yes Display LED for input / output status and failure diagnosis Start / restart automatic / manual (selectable on terminal block), interlock External Device Monitoring - EDM Feedback input, enabling selectable Reaction time < 20 ms Ambient temperature, operation 0 … +55 °C Protection class IP 20, (housing), IP 2X, (terminal blocks) Suitable for all safety light curtains /-grids Connection on terminal blocks Scope of delivery Multi-language instruction manual Two-channel inputs for safety light curtains / -grids 1 Status output PNP (1x), 100 mA, 24 V DC Safety relay outputs NO (2x), 2 A / 250 V AC 99 114.5 22.5 Safety instructions All the installation, connection and safety regulations, as per our technical information, have to be strictly adhered to. The set-up of the products have to be made by skilled staff, only. Repair exclusively made by di-soric. E S P E Usable for safety light curtains / -grids with safety level type 2 and type 4 Additional security functions Start / Restart Interlock EDM Feedback input for extra external contractors monitoring LED indicators for status and diagnosis Inverse polarity protection
Transcript of SR-1 - di-soric.com fileTwo-channel inputs for safety light curtains / -grids 1 Status output PNP...
209199
© di-soric | Subject to modifications | 25/12/19 | Page 1 (1)
SR-1
Safety relay
di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach
Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com
TECHNICAL INFORMATION (typ.) +20°C, 24 V DC
Characteristic parameters Type 4 (IEC/TS 61496-2), SILCL 3 (IEC 62061) PL e - Cat. 4 (ENISO 13849-1)
Mounting rail fastening according to EN 50022-35 standard
Operating principle Safety relay
Size 99 x 22.5 x 114.5 mm (Dimensions)
Service voltage 19,2 ... 28,8 V DC
Inverse polarity protection Yes
Display LED for input / output status and failure diagnosis
Start / restart automatic / manual (selectable on terminal block), interlock
External Device Monitoring - EDM Feedback input, enabling selectable
Reaction time < 20 ms
Ambient temperature, operation 0 … +55 °C
Protection class IP 20, (housing), IP 2X, (terminal blocks)
Suitable for all safety light curtains /-grids
Connection on terminal blocks
Scope of delivery Multi-language instruction manual
Two-channel inputs for safety light curtains / -grids 1
Status output PNP (1x), 100 mA, 24 V DC
Safety relay outputs NO (2x), 2 A / 250 V AC
99
114.5
22.5
Safety instructionsAll the installation, connection and safety regulations, as per our technicalinformation, have to be strictly adhered to.The set-up of the products have to be made by skilled staff, only.Repair exclusively made by di-soric.
E S P E
Usable for safety light curtains / -grids with safety level type 2
and type 4
Additional security functions
Start / Restart Interlock
EDM Feedback input for extra external contractors monitoring
LED indicators for status and diagnosis
Inverse polarity protection
