Springfield Product Portfolio

T E C H N O L O G Y

Product PortfolioApril 2017

1 Semiconductors

T E C H N O L O G Y

02

The HT20C15 is a mixed signal CMOS modem designed for field instruments and associated interfaces. This component requires few external passive elements to provide the functions needed to satisfy physical layer requirements. It has built in circuitry for modulation, demodulation, receive filtering, carrier detect, and transmit signal shaping.The HT2015 is ideal for low power field instruments (4 to 20mA) and is also suitable for computer interfaces for data acquisition and control. It uses phase continuous frequency shift keying (FSK) at 1200 bits per second as specified in protocol. It work in half duplex mode to save power.

1.1 HT20C15-LQ

The HT2012 is a CMOS modem designed for field instruments and associated interfaces. This component has a very low power consumption but requires some external active and passive elements to provide the functions needed to satisfy physical layer requirements including modulation, demodulation, receive filtering, carrier detect, and transmit signal shaping.The HT2012 is ideal for low power field instruments (4 to 20mA) and is also suitable for computer interfaces for data acquisition and control. It uses phase continuous frequency shift keying (FSK) at 1200 bits per second as specified in protocol. It work in half duplex mode in order to save power.

1.2 HT2012-PL

More information: http://www.shop.springres.us/HT2015-LQ-HART-modem-integrated-circuit-HT2015-LQ.htm

More information: http://www.shop.springres.us/HT2012-PL-HART-modem-integrated-circuit-HT2012-PL.htm

Product PortfolioApril 2017

T E C H N O L O G Y

03

2 Softwares / Interface

The Computer Modem HI232 is a complete communication path for a network. It will enable personal computers to read and or configure data within devices. The computer RS-232 connector provides operating energy for the modem, eliminating the need for extra power supply, while the loop connector is electrically isolated from the computer terminals. These are key features for process control network. The HI232 is able to work with most configuration software in the market, being a reliable and cost effective option.

2.1 HI232

The Computer Modem HIUSB is a complete communication path for a network. It will enable personal computers to read and or configure data within devices. The computer USB connector provides operating energy for the modem, eliminating the need for extra power supply, while the loop connector is electrically isolated from the computer terminals. These are key features for process control network. The HIUSB is able to work with most configuration software in the market, being a reliable and cost effective option.

2.2 HIUSB

More information: http://www.shop.springres.us/HI232-HART-modem-interface-for-RS232-Former-HI311-HI232.htm

More information: http://www.shop.springres.us/HIUSB-HART-modem-interface-for-USB-Former-HI321-HIUSB.htm

Product PortfolioApril 2017

T E C H N O L O G Y

04

The Computer Modem HIBLUE is a complete communication path for a network. It will enable personal computers to read and or configure data within devices. The computer Bluetooth antenna provides a wireless connection for the modem, eliminating the need for hard to access field instruments, the loop connector is electrically isolated from the computer terminals. These are key features for process control network. The HIBLUE is able to work with most configuration software in the market, being a reliable and cost effective option.

2.3 HIBLUE

The HPCOM is a reliable hand held configurator for field devices. Its small size, light weight robust and ergonomic design is easy to carry in your own pocket or tool box. Its proven reliability can simplify configuration or data analysis in the field. The HPCOM has communication compatibility with all field instruments and currently have available software drivers for over 350 existing instruments. More device drivers can be arranged upon DDL/EDDL source files, or custom specification.The HPCOM is mainly used at process control plants for commissioning, diagnosis, data monitoring and configuration changes of instruments. The Lithium Ion rechargeable battery will allow a full day of work under reasonable usage, this feature along with the HPCOMs size, light weight and software functionality will assure a good return of investment.Hand held configuration and monitoring for field instruments at the field or control room.

2.4 HPCOM

More information: http://www.shop.springres.us/HIBLUE-HART-interface-for-Bluetooth-Wireless-technology-HIBLUE.htm

More information: http://www.shop.springres.us/HPCOM-HART-Pocket-Communicator-Former-HPC401PlusC-HPCOM.htm

Product PortfolioApril 2017

T E C H N O L O G Y

05

The HTCOM is a full HART configuration package hosted in a Tablet computer. Designed to run on Windows OS, it is easy to operate and will require no training or complex installation. Its proven reliability will simplify instrument management either in the field or within the convenience of your office. The HTCOM has communication capability with all field instruments and currently has available software drivers for over 350 existing instruments. Further device drivers can be arranged upon DDL/EDDL source files, or customer specification.The HTCOM can be used at process control plants for commissioning, diagnosis, data monitoring and configuration changes of instruments. It will connect to a network via USB port or wireless Bluetooth interface. This software is easy to operate and turns a standard Windows based Tablet into a powerful field communication tool.

2.5 HTCOM

The HLCOM is a HART configuration tool for a personal computer. Designed to run on Windows OS, it is easy to operate from any Lap Top or Desk Top personal computer. Its proven reliability can simplify instrument configuration or data analysis at the convenience of your office or in the field. The HLCOM has communication compatibility with all field instruments and currently has available software drivers for over 350 existing instruments. Further device drivers can be arranged upon DDL/EDDL source files, or customer specification.The HLCOM can be used at process control plants for commissioning, diagnosis, data monitoring and configuration changes of instruments. It will connect to a network via RS-232, USB port, or via wireless Bluetooth interface. This software is easy to install and can turn a standard PC into a powerful field communication tool.

2.6 HLCOM

More information: http://www.shop.springres.us/HTCOM-HART-Tablet-Communicator-HTCOM.htm

More information: http://www.shop.springres.us/HLCOM-HART-LapTop-Communicator-Former-DDCON100-and-CONF401-HLCOM.htm

Product PortfolioApril 2017

T E C H N O L O G Y

06

3 Temperature

The 20 201 offers a reliable solution to any temperature measurement application. With the HART protocol the 20 201 is easily configurable via a PC or handheld configuration tool. The 20 201 can be mounted easily on a DIN rail. High precision electronics and advanced thermal compensation processing give excellent accuracy when reading from any of the industry standard RTD and Thermocouple sensors. In addition, the 20 201 can read any voltage source ranging from 1mV to 1V, and also possesses a software controllable current source enabling the device to read resistance values from any generic transducer.

3.1 20201

The 20 101 offers a reliable solution to any temperature measurement application. With the HART protocol the 20 101 is easily configurable via a PC or handheld configuration tool. The 20 101 is provided in a standard head mount configuration suitable for installation in a wide variety of connection heads and housings. High precision electronics and advanced thermal compensation processing give excellent accuracy when reading from any of the industry standard RTD and Thermocouple sensors. In addition, the 20 101 can read any voltage source ranging from 1mV to 1V, and also possesses a software controllable current source enabling the device to read resistance values from any generic transducer.

3.2 20101

More information: http://www.shop.springres.us/20-201-Temperature-Transmitter-Former-TT411-20-201.htm

More information: http://www.shop.springres.us/20-101-Temperature-Transmitter-Former-TT421-20-101.htm

Product PortfolioApril 2017

07

T E C H N O L O G Y

4 Pressure

The 11101 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11 101s compact size, simplistic installation and economical cost make it an ideal choice for most pressure applications with measurement ranges up to 35 MPa. The 11101 can be mounted in any orientation and uses a 1/2” NPT or M20 x 1.5 process connection.

4.1 11101

More information: http://www.shop.springres.us/11-101-Silicon-Pressure-Transmitter-11-101.htm

The 11 111 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11111s compact size, simplistic installation and economical cost make it an ideal choice for most pressure applications with measurement ranges up to 35 MPa. The 11111 can be mounted in any orientation and uses a 1/2” NPT or M20 x 1.5 process connection.

4.2 11111

More information: http://shop.springres.us/11-111-Ceramic-Pressure-Sensor-11-111.htm

Product PortfolioApril 2017

08

T E C H N O L O G Y

The 11 121 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11121s thin film pressure transducers features a high pressure range along with reliable performance and accuracy. It is ideal for gas and liquid pressure measurement such as water, oil and non aggressive chemical liquid.

4.3 11121

The 11 111 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11111s compact size, simplistic installation and economical cost make it an ideal choice for most pressure applications with measurement ranges up to 35 MPa. The 11111 can be mounted in any orientation and uses a 1/2” NPT or M20 x 1.5 process connection.

4.4 11201

More information: http://shop.springres.us/11-201-Differential-Pressure-Transmitter-Low-Cost-11-201.htm

More information: http://shop.springres.us/Pressure_c6.htm

Product PortfolioApril 2017

09

T E C H N O L O G Y

The 11 301D is an industrial-grade differential pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

4.5 11301D

The 11 301G is an industrial-grade manometric pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Manometric Pressure transmitters have a limitless number of industrial applications.

4.6 11301G

More information: http://shop.springres.us/11-301G-Manometric-Pressure-Transmitter-11-301G.htm

More information: http://shop.springres.us/11-301D-Differential-Pressure-Transmitter-11-301D.htm

Product PortfolioApril 2017

10

T E C H N O L O G Y

The 11 301L is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications.

4.7 11301L

The 11 201G is an industrial-grade manometric pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain rage resistance, built off a ceramic diaphragm that provides accuracy and thickness. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure transmitters have a limitless number of industrial applications.

4.8 11201G

More information: http://shop.springres.us/11-201G-Manometric-Pressure-Transmitter-11-201G.htm

More information: http://shop.springres.us/11-301L-Pressure-Level-Transmitter-with-flange-adaptor-11-301L.htm

Product PortfolioApril 2017

11

T E C H N O L O G Y

5 Level

The 30101 is an intelligent level transmitter designed to detect liquid or solid level in vessels. The 30101 sends and receives radio frequency pulses through the probe using guided wave radar (GWR) techniques for the purpose of level detection. These pulses travel down the probe until the product surface is reached and then reflected and received back at the device. Using Time Domain Reflectometry (TDR) principles, the 30101 is able to effectively calculate the level of the measured product from these received pulses. The 30101 level information can be output as a user configurable 4-20mA signal or monitored remotely via HART the protocol.

5.1 30101

More information: http://www.shop.springres.us/30-101-Level-Transmitter-Radar-TDR-30-101.htm

Product PortfolioApril 2017

The 30 301 is an intelligent HART level transmitter designed to detect liquid or solid levels in vessels. The 30 301 sends and receives radio frequency pulses through the probe using guided wave radar (GWR) techniques for the purpose of level detection. These pulses travel down the probe until the product surface is reached and are then reflected and received back at the device. Using Time Domain Reflectometry (TDR) principles, the 30 301 is able to effectively calculate the level of the measured product from these received pulses. The 30 301 level information can be output as a user configurable 4-20mA signal or monitored remotely via the HART protocol.

5.2 30301

More information: http://shop.springres.us/30-301-Level-Transmitter-Radar-TDR-30301.htm

12

T E C H N O L O G Y

6 Accessories

The Fieldbus repeater RP302 is mainly designed to extend the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA networks. Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1. The galvanic isolation isolation will allow communication with different electrical environments or areas with different grounding circuits. Examples being networks leading to other buildings or inside areas restricted by EMI emission.The RP302 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original conditions of the network.

6.1 RP302

The Fieldbus repeater RP312 is mainly designed to extend the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA networks. Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1. The galvanic isolation will allow communication with different electrical environments, or areas with different grounding circuits. Examples being networks leading to other buildings or inside areas restricted by EMI emission.The RP312 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original of the network conditions. The RP312 has a built in Fieldbus power supply with internal bus terminator built in the network 1 port, eliminating the need for external components for the extra run.

6.2 RP312

More information: http://www.shop.springres.us/RP302-Fieldbus-passive-repeater-RP302.htm

More information: http://www.shop.springres.us/RP312-Fieldbus-active-repeater-RP312.htm

Product PortfolioApril 2017

T E C H N O L O G Y

Springfield Research reserves the right to make changes to design and functionality of any product without notice. Springfield Research does not assume any liability arising out of the application or use of any product. Springfield Research logo is registered trademarks of Springfield Research.HART is a registered trademark of the HART Communication Foundation.© 2016 Springfield Research Corp. All rights reserved

Springfield Research Corporation3350 NW 22nd Terrace Suite 500 • Pompano Beach, FL USA 33069Tel: +1 (954) 657.8849 • Fax: +1 (954) 657.8895 • sales@springres.com • www.springres.com

Product PortfolioApril 2017