SPRING & SUSPENSION contents - Polaris Innovations · SPRING & SUSPENSION ... Design...

i

ENJOY THE RIDE... ...RIDE TO ENJOYSPRING & SUSPENSION

4x4 Catalogue September 2012

Visit our Website 4x4 Catalogue 4x4 Accessories Catalogue

While we take all care in the preparation of this catalogue, we also realise errors can occur. Please confi rm that the parts you are ordering are correct for your requirements. No responsibility is implied or taken. The names and reference numbers of manufacturers and suppliers, other than Dobinsons Spring & SuspensionTM, used in this catalogue are shown only to assist our customers in identifying replacement parts. Under no circumstances does Dobinsons Spring & SuspensionTM imply that the parts are of these OE manufacturers.

Pictures used in this Catalogue are for illustration purposes only

1-4 |Daihatsu5-12 |Ford13 |GM / Chevrolet 14 |General Motors 15-16 |Great Wall17-23 |Holden - GM - Isuzu24 |Holden - Chevrolet25 |Holden 26-27 |Isuzu28-29 |Honda29 |Hyundai31-41 |Jeep42-45 |Kia44 |Lada46-54 |Landrover55-57 |Mazda58-60 |Mercedes61-70 |Mitsubishi71-95 |Nissan96-100 |Ssangyong101 |Subaru102-109 |Suzuki110-154 |Toyota155 |UAZ156 |Volkswagen157 | Coil Spacers158 |Terms and conditions

Vehicle Suspension

contentstable ofcontentscontents

Dobinsons Spring & SuspensionTM are committed to bringing you the very latest at all times. Our printed editions come out on a regular basis. Our online editions are constantly updated. You can view them at any time on our website of using these QR Codes.

xvi

GEN

ERA

L IN

FO GeneralGeneralLeaf SpringsIt is important to remember that a spring supports weight and sets the vehicle ride height. It determines the optimum limits of the suspension travel and is a major contributor to the vehicle’s ride and handling. But a spring cannot operate effectively without a correctly matched shock absorber.

rtant to remember It is importhat a spring supports weightth t iand sets the vehicle ride height. It determines the optimum limits of the suspeimits of the suspension traveland is a major contributor toand is a major contributor tothe vehicle’s ride and handling. But a spring cannot operate

y yeffectively without a correctly with ectly matched shock absorber.shock

Military WrapperWhere possible, a Military Wrapper is used as a safety mechanism to aid the vehicle’s steering in the case of the main leaf breaking.

ary Wrapperpossible, a

per is used anism to

ering n ain

Drawn, Tapered and Diamond Cut LeavesTo assist in Load Distribution and reduce Inter Leaf Friction which occurs at the end of the leaves.

Drrawn, Tapered and rDiamond Cut LeavesiTo assist in Load Disstribution and reducesIntter Leaf Friction whichtoccurs at the end of the coccurs at the end of thecleaaves.a

Design CharacteristicsAll leaf lengths are designed and calculated to achieve a High Performance spring. Inappropriate leaf lengths will concentrate stress in one particular area and will cause premature sagging or breaking.

Design CharacteristicsCharact icsl f l th d i dngths are designed leaf len

ated to achieve a calculaPerformance spring.

te leaf lengths te stress in one

d will cause nd will causeor breaking.

Scrag TestingScragging is a process where the spring is load tested to 90% of the Yield Stress of the material used. This process helps to relieve and prevent sagging.

Scrag TestingScragging is a process where the spring is load tested to 90% of the Yield Stress of the material used. This process helps to relieve and prevent helps to relieve and preventsagging.

Inter Leaf Anti-Friction LinersReduce friction at the tip of the leaves where the Load is greatest in the spring.

Inter Leaf Anti-Friction LineReduce friction at the tip of the leaves where theLoad is greatest in theLoad is greatest in thespring.

Quality ControlStringent quality control procedures for Heat Treatment (Tempering) processes at all phases of the manufacturing processes ensures Dobinsons Springs are made the same exceptional way every time.

Quality ControlQuality ControlStringent quality control procedures for Heat TreatmenTreatment(Tempering) proceprocesses at all hases of es of the manufacturing

esses ensures Dobinsons nsures Dobinsonare made the samemade the sameare made the samemade the sameal w very timway every time.

Please Note: The above spring is represented as an example only. Springs in this Catalogue may not have all of these features.

MilitaryWhere poMilitary Wrapperas a safety mechanaid the vehicle’s steerin the case of the mainin the case of the mainleaf breaking.

DAllAll leand calHigh PerInappropriatewill concentrate particular area andparticular area andprpremature sagging or b

inerstip

(TphasprocprocessSprings aSpringsexceptional w

xvii

Coil Springs

Dobinsons Spring & SuspensionTM also have in some cases a Progressive Rate Design Spring to suit some particular vehicle needs.

The Progressive Rate Spring Design provides both an excellent ride unladen and a much-needed increase in load carrying capacity when required.

This is achieved by making the Pitch Distance between the Coils closer together at one end leaving less active coils working in the spring. This increases the rate tremendously, giving better load carrying capacity.

obinsons Spring & SuspensionDob TM also have in some cases a Progressive Ratee haDesign Spring to suit some particularr vehicle needs.

The Progressive Rate Spring Designn provides both an excellent ride unladenn and a much-needed increase in loadd carrying capacity when required.

This is achieved by making the Pitchh Distance between the Coils closerr together at one end leaving lesss active coils working in the spring. This increases the rate tremendously,, This increases the rate tremendouslygiving better load carrying capacity.

Original Equipped Coil Springs are prone to sagging (especially the rear) and therefore cannot satisfactorily carry increased loads.

Dobinsons Spring & SuspensionTM

manufacture after market Coil Springs to restore the ride height with our improved Design Coils. In most cases, the coil is 20% - 40% stronger than the original OEM Spring.

This gives better Load Carrying capacity for Heavy Loads and enhances Road Handling while also improving towing capacities.

Original Equipped Coil Spprings are prone to sagging (espeecially the rear) and therefore cannot annot satisfactorily carry increased loads.

Dobinsonnns Spring & Suspensionp g p TMTM

manufacacacture after market Coil Springngngs to restore the ride heiggght with our improved Design Coooils. In most cases, the coil is 2220% - 40% stronger than the original OEM Spring.al OEM Sprin

This gives better Load rying T s betters gives better d Carrycapacity for Heav Loads c Hacity for H vy Land enhances RoadRo ndling nd enhances Ro d Handling while also improving ile also im g towing wh e so mprovinghile also impr ng towingcapacities.ities

State of the ArtHeat TreatmentHeat treatment is unseen and is the most important process in the coil spring manufacturing process. Hardening and tempering is completed by a very accurate electronically controlled furnace to eliminate breakage.

State of the ArtHeat TreatmentHeat treatment is unseen and is the most importantant process in the coil sprprocess in the coil sppring manufacturing proprocess. Hardening and temtempering is completed byby a very accurate eelectronically controlled furnace to controlled furnace toeliminate be breakage.

Formed on Precision MandrelsEach coil is precisely placed by a programmable logic computer to achieve perfect pitch. This is very important in Variable and Progressive Rate Springs.

isioned on PrecisFormeelsMandre

ecisely placed l is preciEach coiammable logic rogramby a p

to achieve perfect er tocomputehis is very important Thhipitch. Thble and Progressive riabin Vari ble and Progressiveiabin Varia

te Springs.e SprRateRate

Design TechnologyDobinsons Spring & SuspensionTM computers have a design that allows the spring to maximise what is expected of the spring: Better Load Carrying Better Handling Height Requirements Greater Towing capacity

Design TechnologyDobinsons Spring & Suspensionp g p TM

computers have a design that allows the spring to maximise alloallows

xpected of the spring:what is expected orying Better Load Carrying

Better Handling Height RequirementsHeight Requirements Greater Towing capapacity

Shot PeenedCoils are shot peened to give longer life.

Shot PeenedCoils are shot peeneded to give longer life.give longer life.

Powder Coat FinishThe powder coat fi nish is baked on to give a lasting protective coat to help eliminate rust.

Powder Coat FinishPowdewder coat fi nish iss The powon to give a lastingg baked o

ppp ve coat to helpp protective rust.eliminat

Fully Scragged and Load TestedAll coils are scragged 100% to eliminate subsequent spring sag and load tested to ensure that they meet and maintain the required specifi cations.

gged andFully ScraggtedLoad Teste

are scragged 100% All coils aeliminate subsequent to elim

ring sag and load tested sprinto ensure that they meet to and maintain the required and maintain the requiredspecifi cations.

Precise EndConfi gurationsEngineered Coil Ends are designed to fi t the vehicle correctly.

Precise EndConfi gurationsEngineered Coil Ends are designed to fi t the vehicle designed to fit the vehiclecorrectly.

GEN

ERAL IN

FO

Dobinsons Spring & SuspensionTM have a large range of Coil Springs available and arecon nuously adding as each new model is released.

Regardless of your vehicle choice, Dobinsons Spring & SuspensionTM has acoil that can transform your ride and handling characteris cs

for on road vehicles and off road vehicles.

xviii

ACCESSORIES

HOW TO IDENTIFY YOUR SPRING AND SUSPENSION REQUIREMENTS

Throughout this catalogue, there are many models of vehicles with a selection of spring variations. When selecting a spring, be very careful to select the right springs to achieve your requirements. Particularly in the cases where there may be a bullbar, winch, roof racks, draw system, large fuel tanks, rear tyre carrier, etc. It may be necessary to mix and match front and rear springs to suit the loads the vehicle will be carrying. For example, a Heavy Bullbar & Winch on the Front would require Front Raised Springs and Standard Rear Springs.

All lift measurements given are only an indication of what can reasonably be expected. Every vehicle is different in its own right and therefore may result in higher or lower lift measurements once fi tted.

Where there is not a selection of springs, we have chosen the best performing spring to suit the vehicles ride height, handling, carrying and tow-ing capacities.

HOW TO SELECT PARTS IN THIS CATALOGUE

Firstly, you may order individually any part listed in this catalogue, but we recommend that you order and fi t in pairs (sets), the springs, shock absorbers and torsion bars. They have up-rated specifi cations and must be fi tted in pairs to make the vehicle operate correctly.

BUILT ON PRIDE, DEVELOPED WITH TECHNOLOGY

Dobinsons Spring & SuspensionTM, established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products.

The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service. Our quality of design and manufacture is what sets us apart from our competitors, if not the price. The company manufactures and repairs a large range of springs and sells a comprehensive range of suspension components. We have over 13,000 spring specifi cations on hand and computerised spring design programs provide us with professional and accurate results.For the past 25 years, Dobinsons Spring & SuspensionTM have been exporting their products to different parts of the world and their name has become synonymous with quality in these countries. Our Head Offi ce is situated in Rockhampton with Distributors worldwide.

Dobinsons Spring & SuspensionTM has the ability to give a very fast service by combining our large amount of stock on hand, and by using our manufacturing plant to make the Leaf and Coil Springs quickly. A factor that, combined with our friendly and helpful staff, makes them an un-beatable supplier of Quality Suspension Components.

There are thousands of parts kept in stock, including Coil Springs, Leaf Springs, Torsion Bars, Shock Absorbers, Greasable Shackle Kits and Pins, U-Bolts, Polyurethane Bushes, Centre Bolts & Castor Wedges.

RESEARCH AND DEVELOPMENT

Dobinsons Spring & SuspensionTM is committed to quality and to achieve this, much research and development has been done in the past and will continue into the future as new products are released.

It is in our best interest to keep advancing our product range so the ultimate spring & suspension components are achieved. The Leaf and Coil Springs in this catalogue have all been designed to suit Australian conditions, which are some of the harshest in the world. We believe our prod-ucts, in most cases, are purchased to achieve improvement in four major areas: Lift, Handling, Heavy Loading & Towing.

By purchasing from Dobinsons’ superior range of springs, the above 4 characteristics can be achieved to produce the ultimate combination of suspension systems.

Research and Development are in the very heart of Dobinsons Spring & SuspensionTM.

OTHER SUSPENSION REQUIREMENTS (Not Listed in this Catalogue).

This 4x4 Catalogue only presents a small amount of Vehicles and Models. Dobinsons Spring & SuspensionTM handle a vast range of vehicles, and have specifi cations for over 13,000 springs. We cater for all vehicles, from small passenger cars up to the large trucks. With an extensive stock of Leaf & Coil Springs, Shackle Pins & Kits, U-Bolts, Shock Absorbers, Torsion Bars, Polyurethane Bushes, and most other suspension components, Dobinsons Spring & SuspensionTM can supply the parts for you to...

… Enjoy the Ride

GEN

ERA

L IN

FO

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

1

FRONT QTY PART

NUMBER REAR QTY PART

NUMBER

Price Code(if applicable)



Sold in PairsSold in Pairs - (A) (B) (C) etc... Indicates Price Code

Torsion Bars:Coil Springs:

Raised Height measurements are listed as a guide only

Daihatsu

DAI-53

DAIHATSU

F70, F75, F80, F85RV

Hardtop, Rugger, Fourtrak, Wildcat

Rocky

1984 - 08/1993

5 LeavesRaised Height (40mm Lift)

11

F77-5L-F RHF77-5L-F LH

LEAF SPRINGSingle Stage

Kit Contains:4 x SPF2384 x SPF560 1 PB15-1062K

SHACKLE BUSH KIT

Kit Contains:Right Hand Side - 1 x UB15-658

1 x UB15-659

Left Hand Side - 2 x UB15-658

1

1

UB15-659K

UB15-658K

U-BOLT KITType A

Heavy Duty Twin Tube Gas 2 GS15-639S

SHOCK ABSORBER

4+1 LeavesRaised Height (40mm Lift) 2 DAI-011-R

LEAF SPRINGTwo Stage

Kit Contains:2 x SPF2392 x SPF2384 x SPF560 1 PB15-1064K

SHACKLE BUSH KIT

Kit Contains:2 x UB15-658 2 UB15-658K

U-BOLT KITType A


SHOCK ABSORBER

DA

IHATSU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

2 Sold in PairsSold in Pairs - (A) (B) (C) etc... Indicates Price Code

FRONT QTY PART


NUMBER






DAI-54

DAIHATSU

F77, F87

Pickup

Rocky

1984 - 1993


11

F77-5L-F RHF77-5L-F LH



SHACKLE BUSH KIT

Kit Contains:Right Hand Side - 1 x UB15-658

1 x UB15-659

Left Hand Side - 2 x UB15-658

1

1

UB15-659K

UB15-658K

U-BOLT KIT

Heavy Duty Twin Tube Gas 2 GS15-639A

SHOCK ABSORBER

5+2 LeavesRaised Height (40mm Lift) 2 F77-5+2-R


Kit Contains:2 x PT267

2 x PT549-34 1 PB15-1063K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER

DA

IHAT

SU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

3

FRONT QTY PART


NUMBER







DAI-55

DAIHATSU

CX12, F300

Narrow track, Sportrak

Feroza

10/1988 - 1998

Heavy DutyRate Increased

Length 1093mm 1 TB15-197

TORSION BAR


SHOCK ABSORBER

4+2 LeavesRaised Height (45mm Lift) 2 DAI-015-R



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER

DA

IHATSU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






DAI-56

DAIHATSU

F73, F78, F85,F98; SE/SX2.8L TD

Rocky

1993 - 2002

Heavy DutyRate IncreasedLength 950mm 1 TB15-198

TORSION BAR

Heavy Duty Twin Tube Gas 2 GS15-463W

SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

Linear RateRaised Height (40mm Lift) 1 C21-059 (A)

DA

IHAT

SU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

5

FRONT QTY PART


NUMBER







Ford

FORD-51

FORD

U.F.S.PC/PH 4.0L V6Pickup / Dual CabMazda Proceed, Ranger 2000Suspension Fits PC/PH 2x4 & 4x4

Courier / Ranger

1987 - 11/2006


TORSION BAR

Heavy Duty Twin Tube Gas 2 GS19-082P

SHOCK ABSORBER

5+2 LeavesRaised Height (35mm Lift)

Medium Load to GVM

6+2 LeavesHeavy Duty

Raised Height (35mm Lift)200Kg to GVM

2

2

MAZ-003-R

B2600-4X4-R



SHACKLE BUSH KIT

Kit Contains:2 x UB59-453-3 2 UB59-453-3K

U-BOLT KIT

Heavy Duty Twin Tube Gas 2 GS19-081T

SHOCK ABSORBER

Greasable: Fit in Pairs 2 SK59-010

SHACKLE KIT

FORD

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






FORD-60

FORD

PJ, PKHighrider 3.0L TDPickup / Dual CabMazda BT-50Suspension Fits 4x4 & 4x2 Highrider

Ranger (Series I)

2007 to 08/2011


Length 1024mm x 27mm 1 TB39-1551

TORSION BAR


SHOCK ABSORBER

3+2 LeavesStandard Duty

Raised Height (40mm Lift)Light Load to GVM



5+2 LeavesSuper Heavy Duty


2

2

2

L39-030-R

L39-031-R

L39-032-R


Kit Contains:2 x PB59-1503

4 x SPF5024 x SPF753 1 PB39-1056K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

FORD

Greasable: Fit in Pairs 2 SP59-060

PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

7

FRONT QTY PART


NUMBER







FORD-62

FORD

PX

Pickup / Style Side / Ranger T6 South AfricaWell Back / Tray BackAlso Suits 4x2 Highrider

Ranger (Series II)

08/2011 on

Heavy Duty Twin Tube Gas 2 GS19-092

SHOCK ABSORBER

3+3 LeavesMedium Duty

Raised Height (40mm Lift)


Raised Height (40mm Lift)280Kg to GVM (Recommended)



2

2

2

L19-131-R

L19-132-R

L19-133-R


Kit Contains:2 x PB19-15234 x PB19-15244 x PB19-1525 1 PB19-1104K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

o StageCOIL SPRING

Linear RateRaised Height (40mm Lift)

No Accesories 1 C19-422 (B)


50 - 90Kg Accesories 1 C19-424 (B)





XL Trayback 2.2L (Single Cab)XL Pickup 2.2L / 3.2L (Dual Cab)XL & XLT Pickup 3.2L (Extra Cab)4x2 Highrider

XL Trayback 2.2L, Dual CabXL Trayback 3.2L, Single Cab, Extra CabXLT + Wildtrack 3.2L Pickup, Dual Cab

FORD

Cannot use Original Bushes with this Spring


Comfort Option (reduced rate)50 - 90Kg Accessories 1 C19-428 (B)


Comfort Option (reduced rate)50 - 90Kg Accessories 1 C19-428 (B)


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Linear RateRaised Height (50mm Lift) 1 C45-103 (B)



FORD-53

FORD

Y60

Station Wagon, SWB & LWB Australia

Maverick

1988 - 1994

COIL SPRING

Drive Line Vibration May Occur with Raised Suspension. To Reduce Vibration use 1 TC45-001K

SHOCK ABSORBER

UNDER BODY BUSH KIT


SWB

LWB


STEERING DAMPER

Heavy Duty (Big Bore)Complete with Fittings 1 SD45-836

09/1989 on


Pre 09/1989

UNDER BODY BUSH KIT

CASTOR KIT

Adjustable Front Radius Arm Castor KitAngle Settings: ±0°, ±2.5° or ±3.5°

4 x Polyurethane Bushes4 x Eccentric Bushes (+1 Grease Tube) 1 PB59-503K

Raising vehicle will effect castor angle.A wheel allignment is recommended to determine if a castor kit is required.

GEARBOX SPACER KIT

COIL SPRING

SHOCK ABSORBER

SWB

LWB


4 x Front Radius Arm to Chassis Bush4 x Front Radius Arm to Diff Bush2 x Front Panhard Rod Bush2 x Rear Panhard Rod Bush8 x Rear Trailing Arm Bush 1 PB45-1231K

4 x Front Radius Arm to Chassis Bush4 x Front Radius Arm to Diff Bush4 x Front & Rear Panhard Rod Bush8 x Rear Upper & Lower Trailing Arm Bush 1 PB45-1239K

09/1989 on

Pre 09/1989

See Rear Under Body Bush Kit

Kit Includes Front & Rear Under Body Bushes

FORD

Extra Heavy Duty Twin Tube GasFor Loaded Vehicles 2 GS59-703

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

9

FRONT QTY PART


NUMBER







FORD-54

FORD

Y60

PickupLeaf Spring Suspension

Maverick

1988 - 1994


No Accessories


50 - 100Kg Accessories (Bull Bar and Winch)Heavy Duty (Recommended)

2

2

Y60-7L-F

Y60-8L-F



SHOCK ABSORBER


Light Load to GVM


300Kg to GVMHeavy Duty (Recommended)


500Kg to GVM

11

11

11

Y60-5+2-R RHY60-5+2-R LH

Y60-6+2-R RHY60-6+2-R LH

Y60-7+2-R RHY60-7+2-R LH


Kit Contains:12 x SPF2260 1 PB59-1019K

SHACKLE BUSH KIT


U-BOLT KIT

Heavy Duty Twin Tube Gas (Big Bore) 2 GS45-125

SHOCK ABSORBER

Greasable:Fit in Pairs

Can be substituted by:Right Hand Side (Anti-Reverse)

Left Hand Side (Anti-reverse)

2

11

SK59-019

SK59-048SK59-047

SHACKLE KIT


PIN KIT

7 Lea

LEAF SPRINGSingle Stage g


SHACKLE BUSH KIT


U-BOLT KIT




2

11

SK59-019

SK59-048SK59-047

SHACKLE KIT


PIN KIT

STEERING DAMPER

FORD

Heavy DutyComplete with Fittings 1 SD45-022

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






FORD-57

FORD

F250 4x4

4.2L 6 Cyl Turbo Diesel7.3L Diesel

“F” Series

2001 - 11/2006



SHOCK ABSORBER




2

2

FORD-014-R

FORD-015-R


Front of FrontRear of Front

22

PB19-1504PB19-1505

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


Front of FrontRear of Front

22

PB19-1504PB19-1505

SHACKLE BUSH KIT


U-BOLT KIT

Bellows Type 1 RR4557

AIR BAG KIT

Complete with Bushes 1 PR19-1400

ADJUSTABLE PANHARD ROD

Raised Height (50mm Lift)5 Leaf Multi Leaf Spring

Replaces 2 Leaf Parabolic 2FORD-011-F LHFORD-011-F RH

4.2L Turbo Diesel

Raised Height (50mm Lift)6 Leaf Multi Leaf Spring

Replaces 2 Leaf Parabolic 2FORD-010-F LHFORD-010-F RH

7.3L Turbo Diesel

When fi tting the above springs, longer U-Bolts are requiredWhen fi tting the above springs, U-Bolt part number UB19-921K Must be fi tted

FORD

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

11

FRONT QTY PART


NUMBER







FORD-61

FORD

F350 4x4

Single & Dual Cab, SWB & LWBMono Beam Front Axle with Coil Suspension

Single Rear Wheel

“F” Series

2007 on


With 80Kg Accessories (Bull Bar and Winch) 1 C19-324 (B)

COIL SPRING

SHOCK ABSORBER



5+2 Leaves6 Leaves

Raised Height (70mm Lift)Heavy Duty

300Kg to GVM

5+2 Leaves7 Leaves

Extra Heavy DutyRaised Height (70mm Lift)

500Kg to GVM

6+2 Leaves7 Leaves

Super Heavy DutyRaised Height (70mm Lift)

1000Kg to GVM

2

2

2

FORD-021-R

FORD-022-R

FORD-023-R

LEAF SPRINGTwo Stage plus Helper

Front of RearRear of Rear

Shackle

222

PB19-1504PB19-1505PB19-1505

SHACKLE BUSH KIT


U-BOLT KIT

Heavy Duty Hydraulic 2 TS90-314

SHOCK ABSORBER

Main SpringHelper Spring



FORD

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Linear RateRaised Height (45mm Lift) 1 C19-431 (D)

FORD-63

FORD

4x4119” Wheelbase

Expedition

2008 on

COIL SPRING

SHOCK ABSORBER


No Accessories 1 C19-430 (C)


COIL SPRING

SHOCK ABSORBER



200Kg to GVM 1 C19-433 (D)


80 - 100Kg Accessories (Bull Bar and Winch) 1 C19-432 (C)

FORD

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

13

FRONT QTY PART


NUMBER







GM / Chevrolet

Linear RateRaised Height 1 C09-045 (B)

GMC-50

GM / CHEVROLET

Including XL Models

GMT 900 Series Platform4x4

Avalanche, Tahoe,Suburban 1500 (1/2 Ton)2007 on

COIL SPRING

SHOCK ABSORBER

Linear RateRaised Height 1 C09-044 (C)

Heavy Duty Adjustable Twin Tube Gas 2 GS09-170

COIL SPRING

SHOCK ABSORBER


GM

/ CHEVRO

LET

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






General Motors


GMC-51

GENERAL MOTORS

Cadillac Escalade ESV/EXT

Yukon 1500 (1/2 Ton - Incl XL & Denali)

GMT 900 Series Platform4x4

Cadillac Escalade , Yukon

2007 on

COIL SPRING

SHOCK ABSORBER

Linear RateRaised Height 1 C09-044 (C)


COIL SPRING

SHOCK ABSORBER


GEN

ERA

L M

OTO

RS

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

15

FRONT QTY PART


NUMBER







Great WallGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaaaaaaaaaaaaaaaaaaaaatttttttttttttttttttttttttttttttttt WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaalllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll

GRW-50

GREAT WALL

V200, V240

2x4, 4x4 Pickup 2.4L

Suspension Fits 2x4 & 4x4 Models

WINGLE, SAILOR

06/2009 on



TORSION BAR


SHOCK ABSORBER


Kit Contains:2 x SPF972

8 x SPF2231 1 PB59-1069K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

S NGTwo Stage

Check length before ordering


Softer Option



150Kg Load to GVM

2

2

2

RODE-011-R

RODE-012-R

RODE-013-R

Above spring has a 200Kg reduced carrying capacity

GREAT W

ALL


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






GRW-51

GREAT WALL

X240 (Australia)Hover/Haval H3 & H5Petrol, Rigid Axle

Hover, Safe, Haval

2005 on



TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

Linear RateStandard Height 2 C45-009 (B)



250Kg Permanent Load to GVM 2 C45-089 (B)

GRE

AT W

ALL

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

17

FRONT QTY PART


NUMBER







Holden - GM - Isuzu

HO

LDEN

GM

ISUZU

HOLD-51

HOLDEN-GM-ISUZU

U.B.S. 13, 16, 52

LWB Wagon, Isuzu-TrooperBig Horn.Up to Chassis No. 4524288

Jackaroo

1982 - 10/1986


TORSION BAR


SHOCK ABSORBER


Medium Load to GVM 2 RODE-008-R



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






HOLD-53

HOLDEN-GM-ISUZU

U.B.S. 16, 17, 52, 55

LWB Wagon, Isuzu-Trooper

From Chassis No. 4524289

Jackaroo

11/1986 - 1991



TORSION BAR


SHOCK ABSORBER


Medium Load to GVM 2 RODE-008-R



8 x SPF2231 1 PB59-1069K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

HO

LDEN

G

M

ISU

ZU


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

19

FRONT QTY PART


NUMBER







HO

LDEN

GM

ISUZU

Variable RateRaised Height (40mm Lift)

Medium Load to GVM 1 C21-165V (B)

HOLD-55

HOLDEN-GM-ISUZU

U.B.S. 26, 69, 73

SWB & LWB Wagon, Isuzu-Trooper,Opel/Vauxhall Monterey

Jackaroo

1992 - 20002001 on



TORSION BAR


SHOCK ABSORBER

COIL SPRING

Heavy Duty Twin Tube Gas 2 GS21-015B

SHOCK ABSORBER

Variable RateStandard Height (10mm Lift) 1 C21-167V (B)

1992 - 2000

Variable RateRaised Height (40mm Lift) 1 C21-215V (B)

2001 on

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






HOLD-56

HOLDEN-GM-ISUZU

UT

SWB Frontera Sport Opel/Vauxhall

LWB Frontera Long Opel/Vauxhall (5 Doors)

Frontera / Amigo

1995 - 1998


Length 1000mm


Length 1220mm

1

1

TB21-1547

TB21-1549

TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


Light Load to GVM 1 C21-161V (B)



HO

LDEN

G

M

ISU

ZU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

21

FRONT QTY PART


NUMBER







HO

LDEN

GM

ISUZU

HOLD-57

HOLDEN-GM-ISUZU

UES25

SWB & LWB3.2L V6, 2.2L TDi

Frontera

02/1999 - 2002



TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


Medium Load to GVM 1 C45-009 (B)Check length before ordering

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






HOLD-54

HOLDEN-GM-ISUZU

KB / TFS-55 (Inc. V6)

Pickup, Opel/Vauxhall Campo,Brava, Isuzu KB320 (Africa)

Rodeo

08/1988 - 2003



TORSION BAR


SHOCK ABSORBER


200Kg to GVM 2 RODE-008-R



8 x SPF2231 1 PB59-1069K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

HO

LDEN

G

M

ISU

ZU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

23

FRONT QTY PART


NUMBER







HOLD-59

HOLDEN-GM-ISUZU

Rodeo RA TFS-77Colorado RC TFS-85Pickup, Isuzu KB, D-Max2.4L, 3.5L V6, 3.0L TDi,2.5L TDi (D-Max)

Rodeo RAColorado RC03/2003 - 200809/2008 - 05/2012



TORSION BAR


SHOCK ABSORBER


Softer Option



150Kg Load to GVM

2

2

2

RODE-011-R

RODE-012-R

RODE-013-R



8 x SPF2231 1 PB59-1069K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


Above spring has a 200Kg reduced carrying capacity

Heavy Duty Twin Tube GasBig Bore 2 GS59-651B

HO

LDEN

GM

ISUZU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






HOLD-61

HOLDEN-CHEVROLET

2nd Generation

2.8L Diesel, 2.5L Diesel

Colorado 7 SUV / Trailblazer

2012 on

HO

LDEN

G

M

ISU

ZU


SHOCK ABSORBER





COIL SPRING COIL SPRING


SHOCK ABSORBER


No Accessories 1 C21-403 (B)

zer

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

25

FRONT QTY PART


NUMBER







HO

LDEN

GM

ISUZU

HOLD-60

HOLDEN

MMU142, RG/GM 1700

2.8L Turbo DieselSingle Cab / Dual Cab

Colorado RG

05/2012 on


SHOCK ABSORBER





COIL SPRING







2

2

2

L21-140-R

L21-141-R

L21-142-R



SHACKLE BUSH KIT

Kit Contains:2 x UB59-453-22 x UB59-453-2

2 x UB59-437

222

UB59-453-2KUB59-453-2KUB59-437K

U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

L21-140-RL21-141-RL21-142-R


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






ISUZ-51

ISUZU

TFS85, V-CROSS

3.0L Turbo DieselSingle Cab / Dual Cab

D-Max

05/2012 on

HO

LDEN

G

M

ISU

ZU


SHOCK ABSORBER







2

2

2

L21-140-R

L21-141-R

L21-142-R



SHACKLE BUSH KIT

Kit Contains:2 x UB59-453-22 x UB59-453-2

2 x UB59-437

222

UB59-453-2KUB59-453-2KUB59-437K

U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT





COIL SPRING

L21-140-RL21-141-RL21-142-R


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

27

FRONT QTY PART


NUMBER







ISUZ-50

ISUZU

4x4 Station Wagon3.0L DOHC

MU-7

2005 - 2012



TORSION BAR


SHOCK ABSORBER




8 x SPF2231 1 PB59-1069K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT



2

2

RODE-011-R

RODE-012-R

ISUZU

28

FRONT QTY PART

NUMBER


REAR QTY PART

NUMBER


FRONT

QTY PART

NUMBER


REAR

QTY PART

NUMBER


MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





HondaHOND-51HONDA

CRV

CRV-RDI1997 - 20012.0L

HOND-53

CR-V 102001 - 01/20072.4L

COIL SPRING

CRV-RDI

COIL SPRING

CRV-RDI


COIL SPRING

CR-V 10

Linear RateLowered Height (35mm Drop) 1 C23-100 (B)

Linear RateStandard Height (10mm Lift) 1 C23-102 (B)

COIL SPRING

CR-V 10

Linear RateLowered Height (35mm Drop) 1 C23-101 (B)





HO

ND

A

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

29

FRONT QTY PART


NUMBER







COIL SPRING


COIL SPRING




HOND-52

HONDA

GH

1.6L, 3 & 5 Doors

HRV Joy Machine

1999 - 2002

HO

ND

A

30

FRONT QTY PART

NUMBER


REAR QTY PART

NUMBER


FRONT

QTY PART

NUMBER


REAR

QTY PART

NUMBER


MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





HyundaiHYU-51HYUNDAI

TerracanSanta Fe

Terracan HP2001 on3.5L V6, 2.9L

HYU-52

Santa Fe SM2000 - 05/20062.7L V6, 2.4L, 2.0L TD




SHOCK ABSORBER

TORSION BAR

Terracan


SHOCK ABSORBER

COIL SPRING

Terracan

Variable RateStandard Height

(10mm Lift) 1 C43-047V (B)



COIL SPRING

Santa Fe




SHOCK ABSORBER

COIL SPRING

Santa Fe



HYU

ND

AI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

31

FRONT QTY PART


NUMBER







JeepJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeepppppppppppppppppppppppppppppppppppppppppppppppppppppppp

COIL SPRING

SHOCK ABSORBER


No AccessoriesOR

Raised Height (35mm Lift)50 - 100Kg Accessories (Bullbar & Winch) 1 C29-016 (B)

SPORTS


STEERING DAMPER

Heavy Duty (Medium Body)Complete with Fittings 1 SD29-040


CHEROKEE SPORTS models have a higher ride heightthan LIMITED and CLASSIC models


No AccessoriesOR

Raised Height (35mm Lift)50 - 100Kg Accessories (Bullbar & Winch) 1 C29-002 (B)

JEEP-51

JEEP

XJ

Classic, Limited, Sport, Midsize

Cherokee

94 - 01 (Australia)

84 - 01 (Europe)

LIMITED - CLASSIC

Above part to suit LH Drive Vehicles Only

Above part to suit LH & RH Drive VehiclesDoes not suit LIMITED models

Kit Contains:2 x SPF9692 x SPF970

2 x SPF1080 1 PB29-1080K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


11

JEEP-005-R RHJEEP-005-R LH


SPORTS

LIMITED5 Leaves

Raised Height (45mm Lift)11

JEEP-006-R RHJEEP-006-R LH

CHEROKEE SPORTS models have a higher ride heightthan LIMITED and CLASSIC models

LH Drive models require both sides to be fi tted with the RH spring


Above part to suit Chrysler Differential

Above part to suit Dana 35 Differential

JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






JEEP-55

JEEP

KJLiberty (USA)3.7L V6, 2.4L, 2.8L CRD

Cherokee

10/2001 - 2008


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


COIL SPRING


50Kg Accessories (Bull Bar OR Winch) 1 C29-020 (B)


50 - 100Kg Accessories (Bull Bar and Winch) 1 C29-022 (B)



3.7L V6, 2.4L

2.8L CRDLinear Rate

Raised Height (40mm Lift)180Kg to GVM 1 C29-023 (B)

JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

33

FRONT QTY PART


NUMBER







JEEP-59

JEEP

KK

3.7L V6, 2.8L TDLimited Only

Cherokee

02/2008 on

COIL SPRING


SHOCK ABSORBERSHOCK ABSORBER

COIL SPRING






JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






JEEP-52

JEEP

ZJ - ZG

3.1L 5 Cyl., 4.0L 6 Cyl.

Grand Cherokee

04/1996 - 1999

SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


COIL SPRING






STEERING DAMPER




Above part to suit LH & RH Drive Vehicles

JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

35

FRONT QTY PART


NUMBER








JEEP-54

JEEP

WJ (Austria)WG (USA)4.7L V8, 2.7L D, 4.0L Petrol3.1L TD

Grand Cherokee

1999 - 2004

COIL SPRING

Heavy Duty Twin Tube Gas 2 GS59-650C

SHOCK ABSORBER

SHOCK ABSORBER

COIL SPRING


Up to 40Kg Accessories (Bull Bar OR Winch) 1 C29-010 (B)



4.7L V8, 4.0L Petrol

2.7L & 3.1L T/Diesel


STEERING DAMPER







Variable RateLowered Height (30mm Drop) 1 C29-018V (B)



Variable RateLowered Height (30mm Drop) 1 C29-019V (B)


JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







JEEP-56

JEEP

Laredo WH, WK

3.0L TD, 3.7L V64.7L, 5.7L, 6.1L V8

Grand Cherokee

2005 to 2010

COIL SPRING


SHOCK ABSORBER


COIL SPRING


180Kg to GVM 1 C29-029 (B)

SHOCK ABSORBER



3.0L TD, 3.7L V6 & 4.0L V8

5.7L & 6.1L V8

JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

37

FRONT QTY PART


NUMBER







JEEP-62

JEEP

WK2 Laredo LimitedOverlandWill not suit vehiclesequipped with Quadra-Lift

Grand Cherokee

2011 on

COIL SPRING



COIL SPRING


Up to 40kg Accessories (Bullbar) 1 C29-120 (B)


50-100kg Accessories (Bullbar, Winch) 1 C29-122 (B)



150-200kg Accessories 1 C29-127T (C)

Linear RateRaised Height (40mm Lift) 1 C29-125T (C)

JEEP


Up to 40kg Accessories (Bullbar) 1 C29-128 (B)

3.6L V6 Petrol,5.7L V8 Petrol

3.0L CRD V6 Diesel


Only to be fi tted to vehicles withSelf Levelling Nivomat Shock Absorber(OE 63mm OD body)

To be fi tted to vehicles withoutSelf Levelling Nivomat Shock Absorber(OE 50mm OD body)

Will not replace Self LevellingNivomat Shock absorber on vehicleswith 3.5 ton towing capacity

NOTE: Check OD of OE rear shock body before ordering coil spring

For Nivomat Suspension conversion,Coil Spring C29-125T andShock Absorber GS29-731 can be fi tted;Note towing capacity is reduced to 2.5 ton

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






JEEP-53

JEEP

TJ

2.5L 4 Cyl. Sport,4.0L 6 Cyl. Sahara

Wrangler

10/1996 - 2007

COIL SPRING

1 x Front Panhard Rod to Diff End Only4 x Front Trailing Arm Upper Bush4 x Front Trailing Arm Lower Bush1 x Rear Panhard Rod Bush4 x Rear Trailing Arm Upper Bush4 x Rear Trailing Arm Lower Bush 1 PB29-1212K

SHOCK ABSORBER

SHOCK ABSORBER

COIL SPRING


40 - 80Kg Accessories (Bull Bar OR Winch) 1 C29-002 (B)




STEERING DAMPER






With no Accessories 1 C29-006 (B)


UNDER BODY BUSH KIT


UNDER BODY BUSH KIT



JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

39

FRONT QTY PART


NUMBER







JEEP-60

JEEP

TJ

2.5L 4 Cyl. Sport,4.0L 6 Cyl. Sahara75mm (3” Lift)

Wrangler

10/1996 - 2007

COIL SPRING


COIL SPRING


STEERING DAMPER





Linear RateRaised Height (3” Lift) 1 C29-048 (B)



WARNING - 75MM (3”) LIFTThe suspension components listed on this page are for off-road use only

… Refer to Local Laws before fi tting to Registered/Road vehicles… An Engineering Certifi cate may be required… Handling characteristics will diminish on lifts above 50mm (2”)

The following modifi cations (but not limited to) need to be madeto the vehicle before the kit is fi tted

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.

These products do not come with any warranty or guarantee.

• Adjustable Panhard Rods• Modifi ed Leading / Trailing Arms• Brake Hoses• Extended Bump Stops

• Gear Box & Drive Line Modifi cations• Steering Arms• Swaybar Modifi cation

JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







JEEP-58

JEEP

JK

2 Door, 4 Door

Wrangler

2007 on

COIL SPRING


SHOCK ABSORBER


COIL SPRING


SHOCK ABSORBER



3.8L V6

2.8L CRD Turbo Diesel



2 Door

4 Door


200Kg to GVM 1 C29-089 (B)


350Kg to GVM 1 C29-091 (B)

JEEP

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

41

FRONT QTY PART


NUMBER







JEEP-57

JEEP

XH

Petrol and Diesel

Commander

2006 on


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING






180Kg to GVM 1 C29-029 (B)

JEEP

42

FRONT QTY PART

NUMBER


REAR QTY PART

NUMBER


FRONT

QTY PART

NUMBER


REAR

QTY PART

NUMBER


MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





KiaKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKiiiiiiiiiiiiiiiiiiiiiiiiiiiiaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

COIL SPRING


COIL SPRING



When fi tting above part number, suspension changes are required

SWB & LWB 2.0L


2 Door (Soft & Hard Top)and04/1994 - 2000Short Body 5 Door


2000 - 03/2002Long Body 5 Door Spare wheel mounted inside vehicle



Sportage JA Sportage JA

Spare wheel mounted on tailgate

COIL SPRINGCOIL SPRING

Sportage KM Sportage KM

KIA-51KIA

Sportage

JA04/1994 - 03/20022.0L

KIA-54

KM08/2005 on2.0L

KIA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

43

FRONT QTY PART


NUMBER







AWD




KIA




AWD

2x4 2x4

KIA-55

KIA

SL, SL Platinum

2.0L Unleaded2.4L Unleaded2.0L Turbo Diesel

Sportage

04/2010 on

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






KIA-52

KIA

BL

Sorrento

2003 - 2007

COIL SPRING

Heavy Duty Twin Tube Gas 2 GS33-635W

SHOCK ABSORBER

COIL SPRING


3.5L V6 Petrol2.5L Diesel


3.5L V6 Petrol3.0L Diesel

KIA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

45

FRONT QTY PART


NUMBER







KIA

KIA-53

KIA

BL (LX, EX)

Sorrento

07/2007 to 2010



Petrol


Petrol & Diesel


Diesel

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Landrover

LAND-52

LANDROVER

Coil Spring SuspensionNot with Air Suspension

Range Rover

1971 - 1998




COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT

Front Radius Arm Castor Kit (±2°)

4 x Eccentric Polyurethane Bushes

Suits 38mm wide leading armSuits 44mm wide leading arm

11

PB51-501KPB51-502K


DO NOT fi t to automatic models as vibration may occur.

COIL SPRING

SHOCK ABSORBER


4 x Front Radius Arm to Chassis Bush4 x Front Radius Arm to Diff Bush2 x Front Panhard Rod Bush2 x Rear Upper Arm to Chassis Bush2 x Rear Lower Arm to Diff Bush4 x Rear Lower Arm to Chassis Bush 1 PB51-1242K


With EFI, 02/1986 on

Non EFI, Pre 01/1986

Pre 1986After 1986


Diesel EngineUp to 50Kg Accessories (Bull Bar OR Winch) 1 C51-018 (B)


150Kg to GVM 1 C51-022 (B)



LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

47

FRONT QTY PART


NUMBER







LAND-55

LANDROVER

Series I

Discovery

1991 - 03/1999




COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT



Suits 44mm wide leading arm 1 PB51-502K


DO NOT fi t to automatic models as vibration may occur.

COIL SPRING

SHOCK ABSORBER




Diesel EngineUp to 50Kg Accessories (Bull Bar OR Winch) 1 C51-018 (B) Variable Rate

Raised Height (50mm Lift)Extra Heavy Duty

220Kg to GVM 1 C51-027V (B)




LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






LAND-58

LANDROVER

Series II

TD5

Discovery II

03/1999 - 2004

COIL SPRING


SHOCK ABSORBER

SHOCK ABSORBER

COIL SPRING


Up to 40Kg Accessories (Bull Bar OR Winch)Recommended 1 C51-042 (B)


Extra Heavy Duty40 - 100Kg Accessories (Bull Bar and Winch) 1 C51-052 (B)


STEERING DAMPER





200Kg to GVM 1 C51-027V (B)



LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

49

FRONT QTY PART


NUMBER







LAND-59

LANDROVER

LR3

2.7L V6 TD, 4.0L V6 PetrolCoil Spring Models Only

Discovery III

01/2005 on

COIL SPRING


SHOCK ABSORBER

Linear RateRaised Height (45mm Lift) 1 C51-067 (C)

COIL SPRING

SHOCK ABSORBER



LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






LAND-54

LANDROVER

90 Series

SWB

Defender

1984 - 1990


COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT




11

PB51-501KPB51-502K


COIL SPRING

SHOCK ABSORBER




Chassis number LA930456 on

Chassis Number up to LA930455

Pre 1986After 1986


50 - 80Kg Accessories (Bull Bar and Winch) 1 C51-018 (B)Variable Rate

Raised Height (50mm Lift)220Kg to GVM 1 C51-027V (B)

Petrol



Diesel



LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

51

FRONT QTY PART


NUMBER








350Kg to GVM 1 C51-011 (C)

LAND-53

LANDROVER

110 Series

Pickup, 110 County Wagon,Trayback

Defender

1984 - 1992

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT



Suits 38mm wide leading arm


1

11

PB51-501K

PB51-501KPB51-502K


COIL SPRING

SHOCK ABSORBER





Chassis Number up to LA930434

Isuzu Diesel Engine

Petrol Only



Suits: 110 V8 Petrol 2.5L Diesel

Suits: 110 Isuzu Diesel (Pickup)Linear Rate

Raised Height (30mm Lift) 1 C51-015 (B)




Suits: 110 Wagon & Pickup with Self Levelling Suspension

Suits: 110 Wagon & Pickup without Self Levelling Suspension


Light Load to 250Kg to GVM 1 C51-019 (B)



LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






LAND-56

LANDROVER

110 & 130 Series

LWB 110” Wheel Base 300 TDi130” Wheel Base Double Cab

Defender

1992 - 2001


COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT




Suits 44mm wide leading arm

11

1

PB51-501KPB51-502K

PB51-502K


COIL SPRING

SHOCK ABSORBER




130 Series

110 Series



Suits: 110 Series 130 Series




Suits: 110 Series

Suits: 130 Series



Replace inner coil helper for maximum load carrying capacity


Up to 350Kg to GVM 1 C51-011 (C)


500Kg to GVM 1 C51-059T (C)


500Kg to GVM 1 C51-059T (C)



LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

53

FRONT QTY PART


NUMBER







LAND-62

LANDROVER

110 & 130

TD4 2.4L T/Diesel

Defender

2007 on


COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


COIL SPRING

SHOCK ABSORBER









Suits: 110 Series

Suits: 130 Series



Replace inner coil helper for maximum load carrying capacity


Up to 350Kg to GVM 1 C51-011 (C)


500Kg to GVM 1 C51-059T (C)


500Kg to GVM 1 C51-059T (C)


80 - 120 Kg Accessories (Bull Bar and Winch) 1 C51-026 (B)

Heavy Duty Twin Tube Gas 2 GS51-116 Kit Includes Front & Rear Under Body Bushes

UNDER BODY BUSH KIT


STEERING DAMPER


LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






LAND-57

LANDROVER

Petrol & TD4

Freelander

1997 - 19991999 - 2006




1997 - 19991.8L Petrol2.0L Turbo Diesel(to Chassis No. WA624944)

1999 on2.5L V6 Petrol2.0L TD DOHC(from Chassis No. WA624945)



1997 - 19991.8L Petrol2.0L Turbo Diesel(to Chassis No. WA624944)

1999 on2.5L V6 Petrol2.0L TD DOHC(from Chassis No. WA624945)

LAN

DRO

VER

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

55

FRONT QTY PART


NUMBER







Mazda


TORSION BAR


SHOCK ABSORBER


Medium Load to GVM



2

2

MAZ-003-R

B2600-4X4-R



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

MAZ-51

MAZDA

B2200, B2500, B2600,B4000 4.0L V6Pickup, Ford Raider / Courier,ProceedSuspension Fits 2x4 & 4x4 B4000 V6

Bravo

03/1987 - 11/2006

MA

ZDA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







Length 1024mm x 27mm 1 TB39-1551

TORSION BAR


SHOCK ABSORBER


Standard DutyLight Load to GVM


Heavy Duty280Kg to GVM


Super Heavy Duty420Kg to GVM

2

2

2

L39-030-R

L39-031-R

L39-032-R



4 x SPF5024 x SPF753 1 PB39-1056K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


MAZ-53

MAZDA

BT-50Highrider 3.0L TDPickup / Dual CabFord Ranger PJSuspension Fits 4x4 Highrider & 2x4

BT-50 (Series I)

2007 on

MA

ZDA


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

57

FRONT QTY PART


NUMBER







MAZ-54

MAZDA

BT-50

3.2L Pickup / Style Side /Well Back / Tray BackAlso Suits 4x2 Highrider

BT-50 (Series II)

10/2011 on


SHOCK ABSORBER







2

2

2

L19-131-R

L19-132-R

L19-133-R



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

o StageCOIL SPRING









XT Pickup (Dual Cab)XTR Pickup (Extra Cab)4x2 High Rider

XT Trayback, (Single Cab, Extra Cab & Dual Cab)XTR & GT Pickup (Dual Cab)

Cannot use Original Bushes with this Spring

MA

ZDA


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Mercedes

MER-49

MERCEDES

G230, G300

G230: 2.3L & 2.8L PetrolG300: 3.0L Turbo Diesel

G-Class

1982 - 2001

COIL SPRING

Heavy Duty Twin Tube Gas 2 GS43-784D

SHOCK ABSORBER


Comfort Spring 1 C43-045VE (B)

COIL SPRING

SHOCK ABSORBER




Extra Heavy Duty250Kg to GVM 1 C41-055V (B)

MER

CED

ES

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

59

FRONT QTY PART


NUMBER







MER-50

2005 on

COIL SPRING


SHOCK ABSORBER


Comfort Spring 1 C43-045VE (B)

COIL SPRING

SHOCK ABSORBER





MERCEDES

G55

4 Door Station Wagon

MERCED

ES

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






MER-51

G-Wagon

2005 on

COIL SPRING


SHOCK ABSORBER


COIL SPRING

SHOCK ABSORBER



MERCEDES

G550

5.6L V8

MER

CED

ES

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

61

FRONT QTY PART


NUMBER







Mitsubishi


4 x SPF1874 x SPF192 1 PB43-1085K

MITS-52

Triton

1987 - 09/2006

MITSUBISHI

ME, MF, MG, MH, MJ, MK

Pickup, Colt Rodeo (South Africa),Mighty Max , L200 (PNG)

TORSION BAR

SHOCK ABSORBER


Medium Load to GVM


300Kg to GVM

2

2

TRIT-3+2-R

TRIT-003-R


SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER



STEERING DAMPER

Suits: Petrol & Diesel (pre 1992)Above springs have a 36mm front spring eye. For bush kit use PB43-1075K

Greasable:Fit in Pairs 2 SK43-037

SHACKLE KIT




Suits: V6 Petrol (06/1991 - 2000) Turbo Diesel (1992 on) Diesel (1997 - 2000)




Heavy Duty Twin Tube Gas 2 GS43-082S11/1996 on

Heavy Duty Twin Tube Gas 2 GS43-0821987 - 11/1996

Suits: 36mm Front Spring EyeThe Most Common(K33, 34, 36 etc...)



72mm Dia. (Pre 02/2005)

77mm Dia. (MK 02/2005 on)

Suits: 41mm Front Spring Eye(K76, 77 - Dual Cabs)

(36mm ID)

(41mm ID)

Check Eye IDbefore ordering

MITSU

BISHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






MITS-59

Triton, L200

05/2006

MITSUBISHI

ML, MN

Warrior4x2 Highrider


Comfort Spring


Medium Duty100Kg to GVM



2

2

2

L43-014-R

L43-015-R

L43-016-R


Kit Contains: 2 x PB43-15084 x SPF1874 x SPF192 1 PB43-1085K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


TAILSHAFT SPACER


After fi tting these springs, we recommend adjusting theBrake Proportioning Valve

COIL SPRING

SHOCK ABSORBER


4x4 ML 3.5 V6 Petrol4x4 MN 2.5 T/D Dual Cab GL/GLX


Up to 70Kg Accessories 1 C43-186 (B)


70 - 120Kg Accessories (Bullbar AND Winch) 1 C43-192 (B)

4x2 Highrider4x4 MN 2.5 T/D Single Cab only

MIT

SUBI

SHI

1 S43-001

SHACKLE KIT

When fi tting raised suspension aTailshaft Spacer is required to alignthe Centre Bearing and prolong lifein models with a 2-piece Tailshaft

4x4 ML 3.2 T/D4x4 MN 2.5 T/D Dual Cab GLX-R










PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

63

FRONT QTY PART


NUMBER







MITS-57

Challenger

06/2000 - 2006

MITSUBISHI

PA

2.8L TD, 3.0L V6Nativa


200Kg to GVM 1 C43-043V (B)



TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


MITSU

BISHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






MITS-61

Challenger (Australia)

2008 on

MITSUBISHI

Montero Sport (South America), Nativa,Pajero Sport (Thailand, USA)

COIL SPRING

SHOCK ABSORBER




Softer Option 1 C43-192 (B)



125Kg to GVM 1 C43-045V (B)

COIL SPRING


SHOCK ABSORBER






250Kg to GVM 1 C43-165 (B)

MIT

SUBI

SHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

65

FRONT QTY PART


NUMBER







MITS-54

Pajero

1983 - 2000Pre 1991 (NA - NF)

MITSUBISHI

NA - NF, NH, NJ, NK

SWB & LWBRear Leaf Spring Suspension

TORSION BAR

SHOCK ABSORBER


Medium Load to GVM 2 PAJ-3+1-R


SHACKLE BUSH KIT

U-BOLT KIT


SHOCK ABSORBER



STEERING DAMPER

Suits: V6 & T/Dsi (1995 - 2000)

Suits: NA - NF 4 Cyl. (1983 - 1991) NH, NJ 4 Cyl. (1991 on) NF - NG V6 (1988 - 1991) LWB (05/1991 - 2000)

Fit in Pairs 2 SP43-038

PIN KIT







Heavy Duty Twin Tube Gas 2 GS43-082S07/1991 on

Heavy Duty Twin Tube Gas 2 GS43-082Pre 06/1991

Suits: SWB



Pre 06-1991


Medium Load to GVM 2 PAJ-4+1-R

Suits: LWB


SHACKLE KIT

MITSU

BISHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







MITS-53

Pajero

05/1988 - 2000Pre 1991 (NA - NF)

MITSUBISHI

NA - NF, NH, NJ, NK

SWB & LWB Shogun, MonteroRear Coil Spring Suspension

TORSION BAR

SHOCK ABSORBER


STEERING DAMPER

Suits: V6 & T/Dsi NF - NL (1995 on)

Suits: V6 SWB & LWB (05/1991 - 1996)







Heavy Duty Twin Tube Gas 2 GS43-082SNH, NJ, NK (05/1991 - 2000)

Heavy Duty Twin Tube Gas 2 GS43-082NA - NF (pre 05/1991)

UNDER BODY BUSH KIT

COIL SPRING

SHOCK ABSORBER

Kit Includes Rear Bushes Only4 x Radius Arm to Diff Mount Bush2 x Panhard Rod Bush2 x Swaybar Link Bush

Kit contains extra trailing arm bushes to suit two styles of trailing arms

4 x Trailing Arm to Chassis Bush(Suits pressed steel bracket with bushes)

OR4 x Trailing Arm to Chassis Bush(Suits cast steel bracket without washers) 1 PB43-1226K

Suits: SWB

Suits: LWB



Medium Load to GVM (Recommended) 1 C43-101 (B)




Extra Heavy Duty Option125Kg to GVM 1 C43-045V (B)

Heavy Duty Twin Tube Gas 2 GS43-781NH, NJ, NK (05/1991 - 2000)

Heavy Duty Twin Tube Gas 2 GS43-785NA - NF (pre 05/1991)

Heavy Duty Twin Tube GasBig Bore 2 GS43-788

OR


Extra Heavy Duty Option250Kg to GVM 1 C43-165 (B)

MIT

SUBI

SHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

67

FRONT QTY PART


NUMBER







Linear Rate Raised Height (45mm Lift)Extra Heavy Duty

400Kg to GVM 1 C43-197 (C)

MITS-56

Pajero V7

2000 on

MITSUBISHI

NM,NP (3.5L V6 & 3.2L Tdi),

NS,NT (3.8L V6 & 3.2L Tdi), NW (3.2L Tdi)

SWB & LWB V78Station Wagon

Linear Rate Standard Height (10mm Lift) 1 C43-189 (B)

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



UNDER BODY BUSH KIT

COIL SPRING

SHOCK ABSORBER


4 x Front Control Arm Lower Inner4 x Front Control Arm Upper Inner4 x Rear Control Arm Lower Inner &

Outer4 x Rear Control Arm Upper Inner2 x Rear Toe Control Arm Inner2 x Rear Trailing Arm Lower Rear2 x Rear Trailing Arm Lower Front 1 PB43-1262K


No AccessoriesRecommended 1 C43-124 (B)

Suits: SWB & LWB NM - NP 3.5L V6 NS - NT 3.8L V6


Extra Heavy DutyUp to 100Kg Accessories (Bull Bar and Winch) 1 C43-126 (B)

Linear Rate Standard Height (10mm Lift) 1 C43-123 (B)

Suits: SWB

Suits: LWB

Linear Rate Raised Height (45mm Lift)Medium Load to GVM

Recommended 1 C43-191 (B)

Linear Rate Raised Height (50mm Lift)200Kg to GVM 1 C43-125 (B)


180Kg to GVM 1 C43-193 (C)

Linear Rate Raised Height (50mm Lift)Medium Load to GVM

Recommended 1 C43-125 (B)





Suits: SWB & LWB NM - NT 3.2L Tdi




250Kg to GVM 1 C43-195 (C)

We recommend a wheel alignment be carried outafter fi tting springs

We recommend a wheel alignment be carried outafter fi tting springs

MITSU

BISHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






MITS-60

L400 Spacegear, Delica

05/1994 - 03/2007

MITSUBISHI

MV - P Series

4x4Series I 05/1994 - 05/1997Series II 06/1997 - 05/1999Series III 06/1999 - 05/2002Series IV 06/2002 - 03/2007



TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


06/1999 - 03/2007


We recommend a visual inspection to verify the type of shock absorber prior to ordering

Eye

Eye

Pin

Eye



05/1994 - 05/1999



Suits ECSSuspension

Suits Non-ECSSuspension

ADJUSTABLE PANHARD RODS


MIT

SUBI

SHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

69

FRONT QTY PART


NUMBER







MITS-64

Delica

2007 on

MITSUBISHI

D5

2.4L Petrol Van

COIL SPRING


COIL SPRING




MITSU

BISHI

70

FRONT QTY PART

NUMBER


REAR QTY PART

NUMBER


FRONT

QTY PART

NUMBER


REAR

QTY PART

NUMBER


MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





MITSUBISHI

Pajero iO (Pinin)

Outlander (Airtrek)Pajero iO03/1999 to 07/2003SWB: 1.6L & 2.0L LWB: 1.8L & 2.0L

OutlanderCU 4: 2002 - 12/2006 (2.0L)

ZG: 11/2006 on (3.0L)

Pajero iO

COIL SPRING

Pajero iO


Outlander Outlander

Suits: QA H65 1.6L SWBQA H67 2.0L SWB


Suits: QA H76 1.8L LWBQA H77 2.0L LWB


COIL SPRING


Suits: QA H65 1.6L SWBQA H67 2.0L SWB


Suits: QA H76 1.8L LWBQA H77 2.0L LWB


COIL SPRING

Suits: CU4 Platform

Suits: ZGGS Platform

COIL SPRING


Suits: ZE, ZFCU2 & CU4 Platform


Suits: ZGGS Platform





MITS-55 MITS-58

MIT

SUBI

SHI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

71

FRONT QTY PART


NUMBER







Nissan

NISS-53

NP300 / Navara

09/1985 on2008 on

NISSAN

MD21 - D22NP300Pickup, Single / Dual Cab, King CabJ66, Hardbody, Bakkie

TORSION BAR

SHOCK ABSORBER

3+3 LeavesRaised Height (40mm Lift) 2 NAV-4WD-R


SHACKLE BUSH KIT

U-BOLT KIT


SHOCK ABSORBER



STEERING DAMPER

Suits: D22 (1997 on)J66 HardbodyNP300

Suits: D21 (1986 - 1997)





Kit Contains:2 x PT255

8 x SPF203 1 PB45-1068K


D21 Model Only


200Kg to GVM 2 NAV-005-R


SHACKLE KIT

NISSA

N


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-68

Navara

11/2005 on

NISSAN

D40 STXDoes Not Suit 550 Model4x4 Single Cab, Dual Cab,Extra Cab, Frontier


Medium Duty





2

2

2

L45-002-R

L45-003-R

L45-004-R


SHACKLE BUSH KIT

U-BOLT KIT


SHOCK ABSORBER



SHACKLE KIT


4 x PB45-1507 1 PB45-1095K

Kit Contains:

2 x UB59-6672 x UB59-667

2 x UB59-453-2

222

UB59-667KUB59-667KUB59-453-2K

L45-002-RL45-003-RL45-004-R

Select correct u-bolt to suit appropriate spring selection



COIL SPRING


SHOCK ABSORBER



50 - 100Kg Accessories (Bull Bar AND Winch) 1 C45-254 (B)

NIS

SAN

2.5L Turbo Diesel

The 550 model has a wider chassis to fi t the 3.0L V6 Turbo Diesel. The front shock absorbers and front springs ARE NOT

the same as the 2.5L Turbo Diesel model


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

73

FRONT QTY PART


NUMBER







NISS-75

Navara

04/2010 on

NISSAN

D40A STX550Only Suits 550 ModelV6 Turbo Diesel4x4 Single Cab, Dual Cab,Extra Cab, (Frontier USA)


Medium Duty





2

2

2

L45-002-R

L45-003-R

L45-004-R


SHACKLE BUSH KIT




COIL SPRING


SHOCK ABSORBER




NISSA

N

3.0L V6 Turbo Diesel

NOTE: The 550 model has a wider chassis to fi t the 3.0L V6 Diesel.The front spring and shock absorbers are not the same as the 2.5L TD models.

U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


4 x PB45-1507 1 PB45-1095K

Kit Contains:

2 x UB59-6672 x UB59-667

2 x UB59-453-2

222

UB59-667KUB59-667KUB59-453-2K

L45-002-RL45-003-RL45-004-R

Select correct u-bolt to suit appropriate spring selection


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-54

Pathfi nder

10/1987 - 1995

NISSAN

WD21

Terrano I, Bakkie, Tracker 4x42.4L, 3.0L V6, 2.7L TD

TORSION BAR

SHOCK ABSORBER


STEERING DAMPER




UNDER BODY BUSH KIT

COIL SPRING

SHOCK ABSORBER


2 x Front Upper Arm Bush2 x Front Lower Arm Bush2 x Front Radius Rod Bush8 x Rear Upper & Lower Trailing Arm

Bush2 x Rear Panhard Rod Bush 1 PB45-1229K



Medium Load to GVM 1 C45-089 (B)


Damage will occur to the drive line carrier bearing if more than 20mm lift is applied


Extra Heavy Duty 1 C45-083 (B)

NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

75

FRONT QTY PART


NUMBER







NISS-61

Pathfi nder

1995 - 2005

NISSAN

R50

Terrano RX









NISSA

N

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-67

Pathfi nder

2005 on

NISSAN

R51Does Not Suit Ti 550Station Wagon, Diesel 2.5L Tdi,4.0L V6 Petrol

COIL SPRING

SHOCK ABSORBER





COIL SPRING


SHOCK ABSORBER

Linear RateLowered Height 1 C45-250 (B)




NIS

SAN

2.5L Tdi, 4 Cyl.

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

77

FRONT QTY PART


NUMBER







NISS-76

Pathfi nder

2010 on

NISSAN

R51 Ti 550Only Suits Ti 550Station Wagon, Diesel 3.0L Tdi

COIL SPRING

SHOCK ABSORBER





COIL SPRING


SHOCK ABSORBER



3.0L Turbo Diesel

NISSA

N

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-60

Terrano

07/1993 on (Europe)

03/1997 on (Australia)

NISSAN

R20

Terrano II, Mistral, Ford Maverick (Europe)

2.4L, 2.7L TD, 3.0L TDi





TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER


NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

79

FRONT QTY PART


NUMBER







NISS-51

Patrol

1980 - 11/1983

NISSAN

G160 MQ

Ebro, SafariRound HeadlightsPickup has a Heavier Rear Spring



Up to 50Kg Accessories (Bull Bar OR Winch)

11

11

MQ-6L-F RHMQ-6L-F LH

MQ-7L-F RHMQ-7L-F LH



SHOCK ABSORBER


11

MQ-WAG-R RHMQ-WAG-R LH



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


PIN KIT



4 x (22x16x58) 1 PB45-1021K

SHACKLE BUSH KIT

U-BOLT KIT

Kit Contains:2 x Greasable Pins & Nuts2 x Plates2 x Metal Bushes 2 SK45-029

SHACKLE KIT


PIN KIT

STEERING DAMPER


Suits: Petrol & Diesel

Kit Contains:2 x UB45-682 (Type B) 1 UB45-682K

Kit Contains: 2 x UB45-451 (Type A) 1 UB45-451K

Right Hand Side

Left Hand Side

Type A Type B

Suits: SWB & LWB Station Wagon


11

MQ-UTE-R RHMQ-UTE-R LH

Suits: Pickup

NISSA

N

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-52

Patrol

08/1983 - 1988

NISSAN

G160 MK

SWB & LWBSquare HeadlightsPickup has a Heavier Rear Spring



50 - 80Kg Accessories (Bull Bar OR Winch)

11

11

MK-6L-F RHMK-6L-F LH

MK-7L-F RHMK-7L-F LH



SHOCK ABSORBER


11




SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


PIN KIT



2 x (22x16x58) 1 PB45-1024K

SHACKLE BUSH KIT

U-BOLT KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER


Suits: Petrol & Diesel



Right Hand Side

Left Hand Side

Type A Type B

Suits: SWB & LWB Station Wagon


11

MQ-UTE-R RHMQ-UTE-R LH

Suits: Pickup

NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

81

FRONT QTY PART


NUMBER







NISS-58

Patrol

1989 on

NISSAN

Y260

2.8L TD, SWB & LWBGrand Sud, Baroud

6 LeavesRaised Height (35mm Lift) 2 NIS-260-F



SHOCK ABSORBER


11




SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


PIN KIT


2 x (22x16x58) 1 PB45-1024K

SHACKLE BUSH KIT

U-BOLT KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER




Right Hand Side

Left Hand Side

Type A Type B

NISSA

N

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-57

Patrol

1988 - 05/1999

NISSAN

Y60 GQ

Pickup, GRLeaf Spring Suspension


No Accessories


50 - 100Kg Accessories (Bull Bar and Winch)(Recommended)

2

2

Y60-7L-F

Y60-8L-F



SHOCK ABSORBER


Light Load to GVM


300Kg to GVM(Recommended)


500Kg to GVM

11

11

11

Y60-5+2-R RHY60-5+2-R LH

Y60-6+2-R RHY60-6+2-R LH

Y60-7+2-R RHY60-7+2-R LH



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER

Greasable: Fit in Pairs



2

11

SK59-019

SK59-048SK59-047

SHACKLE KIT


PIN KIT

7 Lea

LEAF SPRINGSingle Stage Two Stage


SHACKLE BUSH KIT


U-BOLT KIT




2

11

SK59-019

SK59-048SK59-047

SHACKLE KIT


PIN KIT

STEERING DAMPER


NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

83

FRONT QTY PART


NUMBER









NISS-59

Patrol

1992 - 05/1999

NISSAN

Y60 GQ

PickupCoil Spring Suspension


200Kg to GVM 1 C45-123VT (C)

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT


COIL SPRING

SHOCK ABSORBER


4 x Front Radius Arm to Chassis Bush4 x Front Radius Arm to Diff Bush4 x Front and Rear Panhard Rod Bush8 x Rear Upper and Lower Trailing Arm

Bush 1 PB45-1239K


Up to 50Kg Accessories (Bull Bar OR Winch)(Recommended) 1 C45-102 (B)

Variable RateStandard Height (20mm Lift)

Medium Load to GVM 1 C45-145VT (C)


(Recommended) 1 C45-103 (B)


Variable RateRaised Height (50mm Lift) 1 C45-115VT (C)


Extra Heavy Duty450Kg to GVM 1 C45-105T (C)







NISSA

N


MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







NISS-56

Patrol

02/1988 - 1998

NISSAN

Y60 GQ

SWB GR, Safari, KYY60




COIL SPRING

Drive Line Vibration May Occur with Raised Suspension. To Reduce Vibration use 1 TC45-001K

SHOCK ABSORBER

UNDER BODY BUSH KIT



STEERING DAMPER


08/1989 - 1999


1988 - 08/1989

UNDER BODY BUSH KIT

CASTOR KIT




GEARBOX SPACER KIT

COIL SPRING

SHOCK ABSORBER




1989 on

Pre 1989See Rear Under Body Bush Kit




NIS

SAN

Recommended when raising vehicle 1 BA45-003BRAKE PRP. VALVE EXTENSION

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

85

FRONT QTY PART


NUMBER








250Kg Load to GVM

Raised Height (75mm Lift)Light Load to GVM 1 C45-129 (B)

NISS-55

Patrol

08/1987 - 1998

NISSAN

Y60 GQ

LWB Station Wagon, GR,Safari, WYG60

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT

Linear Rate - Standard Height 1 C45-092 (B)


STEERING DAMPER


08/1989 - 1999


1988 - 08/1989

UNDER BODY BUSH KIT

CASTOR KITAdjustable Front Radius Arm Castor Kit

Angle Settings: ±0°, ±2.5° or ±3.5°4 x Polyurethane Bushes4 x Eccentric Bushes (+1 Grease Tube) 1 PB59-503K


COIL SPRING

SHOCK ABSORBER




1989 on

Pre 1989



Suits: 3.0L Petrol

Linear Rate - Raised Height (40mm Lift) 1 C45-094 (B)Variable Rate - Raised Height (40mm Lift) 1 C45-096V (B)

Linear Rate - Raised Height (50mm Lift)50 - 80Kg Accessories (Bull Bar OR Winch) 1 C45-102 (B)

Linear Rate - Raised Height (75mm Lift) 1 C45-108 (B)


Suits: 4.2L Petrol & 2.8L TD

Linear Rate - Raised Height (45mm Lift)Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-102 (B)


Variable Rate - Raised Height (45mm Lift) 1 C45-110V (B)

Suits: 4.2L Diesel

Linear Rate - Raised Height (45mm Lift)Extra Heavy Duty


Linear Rate - Raised Height (75mm Lift)Heavy Duty


Linear Rate - Standard Height 1 C45-323 (B)Linear Rate - Raised Height (45mm Lift) 1 C45-103 (B)

Variable Rate - Raised Height (45mm Lift)Light Load to GVM 1 C45-111VT (B)

Variable Rate - Raised HeightExrta Heavy Duty 1 C45-115VT (C)

OR


Extra Heavy Duty450Kg Load to GVM 1 C45-105T (C)

Variable Rate - Standard Height (10mm Lift)Extra Heavy Duty

Medium Load to GVM 1 C45-145VT (C)


350Kg to GVM 1 C45-309T (C)

NISSA

N


MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-63

Patrol

01/1999 on

NISSAN

Y61 GUUCLY61, UELY61PickupFront Coil Spring SuspensionRear Leaf Spring Suspension

COIL SPRING

SHOCK ABSORBER


STEERING DAMPER


CASTOR KIT



No AccessoriesRaised Height (40mm Lift)





Suits: 3.0L TD (2008 on) 4.2L Diesel





Suits: 4.2L TD

OR

OR




(Recommended)



11

11

11

Y60-5+2-R RHY60-5+2-R LH

Y60-6+2-R RHY60-6+2-R LH

Y60-7+2-R RHY60-7+2-R LH



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER




2

11

SK59-019

SK59-048SK59-047

SHACKLE KIT


PIN KIT

Two Stage




Complete with BushesComplete with Bushes

11

PR45-1402PR45-1407

RH DriveLH Drive

NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

87

FRONT QTY PART


NUMBER








11

PR45-1402PR45-1407

Linear Rate - Raised Height (50mm Lift)No Accessories

Raised Height (40mm Lift)60 - 100Kg Accessories (Bull Bar OR Winch) 1 C45-130 (B)

NISS-64

Patrol

05/1999 on

NISSAN

Y61 GUUCNY61, UEN61PickupCoil Spring Suspension




COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


STEERING DAMPER


UNDER BODY BUSH KIT




COIL SPRING

SHOCK ABSORBER





Linear Rate - Raised Height (40mm Lift)(Recommended) 1 C45-138 (B)


Suits: 2.8L TD, 4.2L Diesel






Suits: 4.5L & 4.8L Petrol, 4.2L TD

OR

OR




Variable RateRaised Height (50mm Lift) 1 C45-115VT (C)


200Kg to GVM 1 C45-123VT (C)


Extra Heavy Duty450Kg to GVM 1 C45-105T (C)


RH DriveLH Drive



NISSA

N


Recommended For Vehicles Raised 65-85mm 1 BA45-004

BRAKE PRP. VALVE EXTENSION

Recommended For Vehicles Raised 40-60mm 1 BA45-003

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER








60 - 110Kg Accessories (Bull Bar and Winch)

1 C45-134 (B)

Linear Rate - Raised Height (50mm Lift)No Accessories

Raised Height (40mm Lift)60 - 100Kg Accessories (Bull Bar and Winch)h

1 C45-130 (B)

NISS-62

Patrol

12/1997 on

NISSAN

Y61 GUVRGY61, TCSY61, WRGY61, WYY61, WTY61, WGY61

SWB & LWB Station Wagon


Medium Load to GVM(Recommended) 1 C45-103 (B)


COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


STEERING DAMPER


UNDER BODY BUSH KIT




COIL SPRING

SHOCK ABSORBER







Suits: 2.8L & 3.0L TD, 4.2L Diesel



Suits: 4.5L & 4.8L Petrol, 4.2L TD

OR

OR


SWB

LWB


(12/1997 - 02/2000)

(02/2000 on)


SWB

LWB



200Kg to GVM

1 C45-129 (B)OR

NIS

SAN


GU Patrol Series V

GU Patrol Series I, II, III, IV

Raised Height (45mm Lift)No Accessories 1 C45-129 (B)

Raised Height (45mm Lift)200Kg to GVM 1 C45-329 (B)

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

89

FRONT QTY PART


NUMBER







NISS-73

Patrol

1989 on

NISSAN

Y60 GQ / Y61 GU

SWB75mm (3” Lift)100mm (4” Lift)

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT

Heavy DutyTwin Tube Gas 2 GS51-116

STEERING DAMPER

1988 - 08/1989 1 SD45-834

CASTOR KITAdjustable Front Radius Arm Castor KitAngle Settings: ±0°, ±2.5° or ±3.5°






Suits: Y60 GQ

08/1989 - 1999 1 SD45-836Suits: Y60 GQ12/1997 - 02/2000 1 SD51-811Suits: Y61 GU

02/2000 on 1 SD45-801Suits: Y61 GU

Heavy Duty (Big Bore) - Complete with Fittings



11

PR45-1402PR45-1407

Suits: Y60 GQ / Y61 GU (to 02/2000)RH DriveLH Drive

Complete with Ball Joint and BushComplete with Ball Joint and Bush

11

PR45-1416PR45-1409

Suits: Y61 GU Only (02/2000 on)RH DriveLH Drive

GEARBOX SPACER KIT1 TC45-001K

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fi tting the above kit.

COIL SPRING

SHOCK ABSORBER

Heavy DutyTwin Tube Gas 2 GS45-913


Post 1989

ADJUSTABLE TRAILING ARMS2 x Upper Adjustable Trailing Arms with Bushes 1 WA45-510K


Complete with Bushes 1 PR45-1403Suits: Y60 GQ / Y61 GU (to 02/2000)

RH & LH Drive

Complete with Ball Joint and Bush 1 PR45-1415Suits: Y61 GU Only (02/2000 on)

WARNING - 75MM (3”) OR 100MM (4”) LIFTThe suspension components listed on this page are for off-road use only





Ball Joint To Chassis Mount


Linear RateRaised Height (3” Lift)





NISSA

N



MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






4.5L Petrol,2.8L & 3.0L T/Diesel, 4.2L Diesel

No Accessories50-100Kg Accessories(Bull Bar and Winch)

4.8L Petrol, 4.2L T/Diesel

50Kg Accessories50-100Kg Accessories

100-200Kg Accessories

11

111

C45-134C45-308

C45-308C45-310C45-108

(B) (B)

(B) (B)(B)

NISS-78

Patrol

08/1987 on

NISSAN

Y60 GQ / Y61 GU

Station Wagon & Pickup75mm (3” Lift)

uppppppppppp

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT

Heavy DutyTwin Tube GasSuits all coils 2 GS51-116

STEERING DAMPER

1988 - 08/1989 (Wagon) 2 SD45-834






Suits: Y60 GQ

08/1989 - 1999 (Wagon & Pickup) 2 SD45-836Suits: Y60 GQ12/1997 - 02/2000 (Wagon) 2 SD51-811Suits: Y61 GU

02/2000 on (Wagon) 1 SD45-801Suits: Y61 GU



Suits: Y61 GU Only

DROP BOX1 WA45-509K

May be required for vehicles lifted closer to 4”. Extensive modifi cations are required to fi t the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifi cations are not required when fi tting this part number.



COIL SPRING

SHOCK ABSORBER


Post 1989







The following modifi cations (but not limited to) may need to be madeto the vehicle before the kit is fi tted




• Gear Box & Drive Line Modifi cations• Steering Arms• Swaybar Modifi cation may be required

01/1999 on (Pickup) 2 SD51-811Suits: Y60 GQ & Y61 GU

to 02/2000 (Wagon) 1 PR45-1402RH Drive - Complete with Buses1992 on (Pickup) 1 PR45-1402RH Drive - Complete with Buses

to 02/2000 (Wagon) 1 PR45-1407LH Drive - Complete with Buses1992 on (Pickup) 1 PR45-1407LH Drive - Complete with Buses

Suits: Y60 GQ & Y61 GU

02/2002 on (Wagon) 1 PR45-141602/2000 on (Wagon) 1 PR45-1409

RH Drive - Complete with Ball Joint & BushLH Drive - Complete with Ball Joint & Bush

to 02/2000 (Wagon) 1 PR45-1403Complete with BusesSuits: Y60 GQ & Y61 GU

1992 on (Pickup) 1 PR45-1403Complete with Buses

Suits: Y61 GU Only02/2000 on (Wagon) 1 PR45-1415Complete with Ball Joint & Bush

NIS

SAN

GQ - GU Series I, II, III, IV

Light Duty50-100Kg Load

100-250Kg Load250-350Kg Load

GU Series V

Light Load50-100Kg Load

150-250Kg Load

11

111

C45-129C45-329C45-309TC45-325T

C45-329C45-309TC45-325T

(B) (B)(C) (C)

(B) (C)(C)

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

91

FRONT QTY PART


NUMBER







NISS-66

Patrol

1987 on

NISSAN

Y60 GQ / Y61 GU

Station Wagon100mm (4” Lift)

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


STEERING DAMPER

1988 - 08/1989 2 SD45-834






Variable RateRaised Height (4” Lift) 1 C45-270V (C)

Suits: Y60 GQ

Linear RateRaised Height (4” Lift) - Light Duty 1 C45-314 (B)

Linear RateRaised Height (4” Lift) - Medium Duty 1 C45-316 (B)

Linear RateRaised Height (4” Lift) - Heavy Duty 1 C45-100 (B)

Long travel shock absorber GS45-912 used with C45-270V allows coil to stay trapped at full extension

Heavy Duty Twin Tube GasSuits coil C45-270V 2 GS45-912


02/2000 on 1 SD45-801Suits: Y61 GU




11

PR45-1402PR45-1407



11

PR45-1416PR45-1409


DROP BOX1 WA45-509K

Extensive modifi cations are required to fi t the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifi cations are not required when

fi tting this part number.



COIL SPRING

SHOCK ABSORBER


Variable RateRaised Height (4” Lift) 1 C45-271V (C)

Linear RateRaised Height (4” Lift) - Medium Duty 1 C45-311T (C)

Linear RateRaised Height (4” Lift) - Heavy Duty 1 C45-113T (C)

Linear RateRaised Height (4” Lift) - Extra Heavy Duty 1 C45-313T (C)

Long travel shock absorber GS45-915 used with C45-271V allows coil to stay trapped at full extension

Heavy Duty Twin Tube GasSuits coil C45-271V 2 GS45-915

Post 1989




RH & LH Drive




Linear RateRaised Height (4” Lift) - Extra Extra Heavy Duty

150Kg to GVM 1 C45-315T (C)








NISSA

N

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






NISS-69

Patrol

1987 on

NISSAN

Y60 GQ / Y61 GU

Station Wagon150mm (6” Lift)

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KITSTEERING DAMPER

1988 - 08/1989 2 SD45-834






Suits: Y60 GQ

Linear RateRaised Height (6” Lift) - Light Duty 1 C45-320 (B)

Linear RateRaised Height (6” Lift) - Heavy Duty 1 C45-128 (C)

Linear RateRaised Height (6” Lift) - Extra Heavy Duty 1 C45-322 (C)



02/2000 on 1 SD45-801Suits: Y61 GU




11

PR45-1402PR45-1407



11

PR45-1416PR45-1409


DROP BOX1 WA45-509K





COIL SPRING

SHOCK ABSORBER

Linear RateRaised Height (6” Lift) - Light Duty 1 C45-319 (C)

Linear RateRaised Height (6” Lift) - Heavy Duty 1 C45-131T (C)

Linear RateRaised Height (6” Lift) - Extra Heavy Duty 1 C45-317T (C)


Post 1989




RH & LH Drive











NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

93

FRONT QTY PART


NUMBER







All Coils Variable Rate

2.8L & 3.0L T/Diesel, 4.2L Diesel

No Accessories50-100Kg Accessories

100-200Kg Accessories200-300Kg Accessories

4.5L & 4.8L Petrol, 4.2L T/Diesel



1111

1111

C45-610VC45-612VC45-710VC45-730V

C45-612VC45-710VC45-730VC45-756V

(C) (C)(C) (C)

(C) (C)(C) (C)

NISS-71

Patrol

08/1987 on

NISSAN

Y60 GQ / Y61 GU

Station Wagon & Pickup75mm (3” FLEXI Lift)

uppppppppppp

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


STEERING DAMPER

1988 - 08/1989 (Wagon) 2 SD45-834






Suits: Y60 GQ





Suits: Y61 GU Only

DROP BOX1 WA45-509K

May be required for vehicles lifted closer to 4”. Extensive modifi cations are required to fi t the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifi cations are not required when fi tting this part number.



COIL SPRING

SHOCK ABSORBER


Post 1989






No Accessories100-200Kg Accessories200-300Kg Accessories300-400Kg Accessories

1111

C45-729VC45-731VC45-725VC45-271V

(C) (C)(C) (C)



The following modifi cations (but not limited to) may need to be madeto the vehicle before the kit is fi tted




• Gear Box & Drive Line Modifi cations• Steering Arms• Swaybar Modifi cation may be required

Flexi Springs have a Longer Free Length allowing a Long Travel Shock Absorber to provide more Wheel Articulation without the Spring becoming Untrapped.










NISSA

N

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Flexi Springs have a Longer Free Length allowing a Long Travel Shock Absorber to provide more Wheel Articulation without the Spring becoming Untrapped.

NISS-72

Patrol

08/1987 on

NISSAN

Y60 GQ / Y61 GU

Station Wagon & Pickup100mm (4” FLEXI Lift)

p

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KITSTEERING DAMPER







DROP BOX1 WA45-509K





COIL SPRING

SHOCK ABSORBER


Post 1989




2.8L & 3.0L T/Diesel, 4.2L Diesel



4.5L & 4.8L Petrol, 4.2L T/Diesel



1111

1111

C45-710VC45-730VC45-270VC45-754V

C45-730VC45-270VC45-754VC45-760V

(C) (C)(C) (C)

(C) (C)(C) (C)


No Accessories100-200Kg Accessories200-300Kg Accessories300-400Kg Accessories

1111

C45-725VC45-271VC45-273VC45-775V

(C) (C)(C) (C)








1988 - 08/1989 (Wagon) 2 SD45-834Suits: Y60 GQ




Suits: Y61 GU OnlyBall Joint To

Chassis Mount












NIS

SAN

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

95

FRONT QTY PART


NUMBER







NISS-74

Patrol

2010 on

NISSAN

Y62

LWB Wagon5.6L V8 Petrol

COIL SPRING

SHOCK ABSORBER





50 - 100Kg Accessories (Bull Bar AND Winch) 1 C45-356 (C)

COIL SPRING


SHOCK ABSORBER



150 - 250Kg to GVM 1 C45-357 (C)


250 - 350Kg to GVM 1 C45-359 (C)

This Shock Absorber does not suit vehicleswith a Hydraulic Body Motion Control System

This Shock Absorber does not suit vehicleswith a Hydraulic Body Motion Control System

NISSA

N

96

FRONT QTY PART


NUMBER



MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





SsangyongSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnngggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnngggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg

SSANGYONG

MussoKorando

Musso1995 - 2006S/Wagon, Sports Dual Cab Pickup

Korando1995 - 2006

SSAN-51 SSAN-61





TORSION BAR


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

Lineare RateRaised Height (30mm Lift)


Suits: Korando


Suits: Musso Station Wagon



Suits: Musso Sports Dual Cab Pickup



SSA

NG

YON

G

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

97

FRONT QTY PART


NUMBER







SSAN-52

Rexton (Series I)

2002 - 12/2005

SSANGYONGRX270 2.7L TDRX290 2.9L TDRX320 3.2L PetrolStation Wagon

COIL SPRING

SHOCK ABSORBER



COIL SPRING


SHOCK ABSORBER


SSAN

GYO

NG

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






SSAN-53

Rexton (Series II)

2006 on

SSANGYONG

RX270 XDI Rigid Axle

RX270 SPR Independent Suspension

Station Wagon


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING





Suits: Rigid Axle Models

Suits: Independent Suspension





Suits: Rigid Axle Models

Suits: Independent Suspension

SSA

NG

YON

G

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

99

FRONT QTY PART


NUMBER







SSAN-54

Kyron

2006 on

SSANGYONG

M200 XVT

D100 Series


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING





Suits: Rigid Axle Models Only

SSAN

GYO

NG

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






SSAN-55

Actyon

2007 on

SSANGYONG

A200SQ100 SeriesSports Utility4 Door 2.0L Diesel


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING




200Kg to GVM 1 C53-005 (B)

SSA

NG

YON

G





MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

101

FRONT QTY PART


NUMBER







SubaruSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSuuuuuuuuuuuubbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbaaaaaaaaaaaaaarrrrrrrrrrrrrrrrrrrrrrrrrruuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu

SUB-51

Forester

1997 - 07/2002 SF07/2002 - 02/2008 SG03/2008 on SH

SUBARU

X, XS, XT

2.0L, 2.5L

COIL SPRING


40 - 80Kg Accessories (Bull Bar OR Winch) 1 C55-046 (A)

Suits: 1997 - 07/2002 SFLinear Rate

Raised Height (25mm Lift) 1 C55-044 (A)

Suits: 07/2002 on SG & SH X, XS Models 2.0L & 3.0L (Excluding Turbo)


40 - 80Kg Accessories (Bull Bar OR Winch) 1 C55-046 (A)


Suits: XT Models SG & SH 2.0L & 2.5L Turbo


Up to 50Kg Accessories (Bull Bar OR Winch) 1 C55-046 (A)

COIL SPRING


Light Load to GVM 1 C55-045 (A)

Suits: 1997 - 07/2002 SF

Suits: 07/2002 - 02/2008 SG (Without Self Levelling Suspension)


Light Load to GVM 1 C55-065 (B)

Suits: 03/2008 on SH (Without Self Levelling Suspension)


SUBA

RU

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Suzuki

SUZ-51

SierraDrover QB1981 on

SUZUKIHOLDENSJ, LJ 410/413SJ40, SJ50, SJ51, SJ70Santana, Samurai, Rhino,JimnyDifferent U-Bolts on 410 Model

5 LeavesRaised Height (40mm Lift)No Accessories. Fit in Pairs

6 LeavesRaised Height (40mm Lift)No Accessories. Fit in Pairs

2

2

SUZ-5L-F

SUZ-6L-F



SHOCK ABSORBER

4+1 LeavesRaised Height (40mm Lift)No Accessories. Fit in Pairs

11

SUZ-4+1-R RHSUZ-4+1-R LH



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER

Fit in Pairs 2 SK57-041

SHACKLE KIT


PIN KIT

LEAF SPRINGSingle Stage g


SHACKLE BUSH KIT

U-BOLT KIT

Fit in Pairs 2 SK57-041

SHACKLE KIT


PIN KIT

STEERING DAMPER


2 x UB57-6552 x UB29-900

11

UB57-655KUB29-900K

Right Hand SideLeft Hand Side

2 x UB57-6542 x UB57-655

11

UB57-654KUB57-655K


Suits: Petrol

Suits: Diesel

Suits: SJ410

Suits: SJ413, SJ50, SJ51 (1985 - 1996)

Kit Contains:

Suits: SJ410, SJ413, SJ50, SJ51

SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

103

FRONT QTY PART


NUMBER







SUZ-54

Sierra

1995 - 11/1998

SUZUKI

SJ80

Coil Spring Suspension


COIL SPRING

UNDER BODY BUSH KIT


UNDER BODY BUSH KIT

CAMBER ADJUSTMENT KIT

Kit Contains:2 x Cam Bolts

±1.2° for Lower Control ArmCamber Adjustment 1 WA57-505K

Raising vehicle will effect wheel alignment.It is recommended that this camber adjustment kit be fi tted and a wheel

alignment carried out.

COIL SPRING

4 x Front and Rear Panhard Rod Bush4 x Front and Rear Radius Arm to Chassis Mount4 x Front and Rear Radius Arm to Diff Mount 1 PB57-1253K



SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






SUZ-55

Jimny

1998 on

SUZUKI

SN413, FJB33V

3 Door 1.3L Hard Top / Soft Top1.5L TDi


COIL SPRING

SHOCK ABSORBER


CASTOR ADJUSTMENT KITKit Contains:

4 x Eccentric Bushes

±2 1/2° - 3° Adjustment 1 WA57-511K

COIL SPRING

SHOCK ABSORBER

Suits: G13BB 1.3L EngineLinear Rate

Raised Height (30mm Lift)Up to 35Kg Accessories (Bull Bar OR Winch) 1 C57-028 (A)



35 - 85Kg Accessories (Bull Bar and Winch) 1 C57-046 (A)

Fit Long travel shock absorber GS57-617 with the above spring.

Suits: M13A 1.3L PetrolLinear Rate


Suits: K9K 1.5L Turbo DieselLinear Rate




To be used with original Suzuki springs OR C57-028

Heavy Duty Twin Tube GasLong Travel 2 GS57-617

Can only be used with C57-046 OR C57-048

Raising vehicle will effect wheel alignment.It is recommended that this castor adjustment kit be fi tted and a wheel





Heavy Duty Twin Tube Gas 2 GS57-616To be used with original Suzuki springs OR C57-029


Can only be used with C57-053



SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

105

FRONT QTY PART


NUMBER







SUZ-53

Vitara

1988 - 1997

SUZUKI

1.6L, 2.0L, 2.0L V6 / TD3 Door, SWB Santana, Sidekick,Escudo, Geo Tracker


COIL SPRING

UNDER BODY BUSH KIT


UNDER BODY BUSH KIT






COIL SPRING

Front Lower Control Arm:2 x Front Bush2 x Rear Bush

Rear Control Arm:2 x Upper Bush4 x Lower Bush 1 PB57-1252K

See Rear Under Body Bush KitKit Includes Front & Rear Under Body Bushes

Heavy Duty Twin Tube Gas Strut 2 GS57-620

SHOCK ABSORBER


Linear RateRaised Height 1 C57-016 (A)

Suits: 1.6L 8 Valve Engine

Suits: 2.0L, 1.6L 16 Valve Engine 2.0L V6 Petrol

Suits: 2.0L TD SHOCK ABSORBER


SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






SUZ-52

Vitara

1991 - 1998

SUZUKI

1.6L, 2.0L, 2.0L V6, 2.5L V6, 2.0L TD/Di5 Door LWBEscudo, Sidekick


50-100Kg to GVM 1 C57-047 (A)

COIL SPRING

UNDER BODY BUSH KIT



UNDER BODY BUSH KIT






COIL SPRING

Front Lower Control Arm:2 x Front Bush2 x Rear Bush

Rear Control Arm:2 x Upper Bush4 x Lower Bush 1 PB57-1252K




SHOCK ABSORBER


SHOCK ABSORBER






Suits: 2.0L 4 Cyl, 2.0L V6






Suits: 2.0L TD / Tdi. 2.5L V6



SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

107

FRONT QTY PART


NUMBER







SUZ-57

Grand Vitara (Escudo)

1998 - 2005

SUZUKISQ420W 3 & 5 Door 4 Cyl.

SQ625W 5 Door 2.5L V6

SQ416 3 Door 06/2000 on

SWB 1.6L 4 Cyl., 2.0L 4 Cyl., 2.0L TDiLWB 2.5L V6, 2.0L 4 Cyl., 2.0L TDi


Heavy Duty35 - 65Kg to GVM 1 C57-045 (A)

COIL SPRING







COIL SPRING


SHOCK ABSORBER

SWB 3 Door 1.6L Petrol

SHOCK ABSORBER


SWB 3 Door 2.0L PetrolLinear Rate

Raised Height (30mm Lift)Heavy Duty


LWB 5 Door 2.0L Petrol 2.5L V6 Petrol




Heavy DutyUp to 35Kg Accessories (Bull Bar OR Winch) 1 C57-034 (A)


SWB & LWB 2.0L TD


Heavy Duty 1 C57-027 (A)


Heavy Duty130Kg to GVM 1 C57-111 (B)

SWB & LWB

SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






SUZ-56

Grand Vitara XL7

10/2001 on

SUZUKI

JA627

7 Seater 2.7L V6 H27A2.0L TD

COIL SPRING

Linear RateStandard Height 1 C57-034 (A)






COIL SPRING


SHOCK ABSORBER SHOCK ABSORBER




Linear RateStandard Height 1 C57-033 (A)



SUZU

KI

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

109

FRONT QTY PART


NUMBER







SUZ-58

Grand Vitara

08/2005 on

SUZUKI

JT Series

SWB: 1.6L 4 Cyl., 2.4L 4 Cyl.,LWB: 2.0L 4 Cyl., 2.4L 4 Cyl.,

2.7L V6, 3.2L V6, 1.9L Tdi


COIL SPRING

SHOCK ABSORBER


Heavy Duty Twin Tube Gas Strut11

GS57-622 RHGS57-622 LH

CAMBER ADJUSTMENT KITKit Contains:

2 x Cam Bolts

±1.2° Camber Adjustment

Location: Lower Strut Mount, Upper Hole 1 WA57-506KRaising vehicle will effect wheel alignment.

It is recommended that this camber correction kit be fi ttedand a wheel alignment be carried out.

COIL SPRING

SHOCK ABSORBER


1.6L 4 Cyl.,

1.9L Tdi, 2.4L 4 Cyl., 2.7L V6

E

LWB


SWB


2.0L 4 Cyl.,

3.2L V6


2.4L 4 Cyl.,










SWB

LWB

SUZU

KI




100Kg to GVM 1 C57-075 (B)

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Toyota

Heavy Duty Twin Tube GasMedium Load 2 GS59-649

07/1983 on

Extra Heavy Duty Twin Tube Gas350Kg Permanent Load 2 GS59-650

TOY-56

Hilux

1979 - 1988

TOYOTA

LN/RN 36/46LN/YN 65/67, SR5 ModelsLeaf Spring Suspension

5 Leaves - Raised Height (50mm Lift)Petrol - No Accessories

5 Leaves - Raised Height (50mm Lift)Petrol - With Bull Bar and Winch

Diesel - No Accessories

5 Leaves - Raised Height (50mm Lift)Diesel - With Bull Bar and Winch

11

11

11

HIL-001-F RHHIL-001-F LH





SHOCK ABSORBER





11

11

HIL-4+2-R RHHIL-4+2-R LH

HIL-5+2-R RHHIL-5+2-R LH



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


PIN KIT




SHACKLE BUSH KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER


Kit Contains:1 x UB559-437 (Type B)

1 x UB59-449-3 (Type C) 1 UB59-449-3K

U-BOLT KIT


Right Hand Side

Left Hand Side

Type B Type C

5 Leaves - Raised Height (45mm Lift)Petrol & Diesel

11


Single Cab

Dual Cab

Pre 07/1983

The following springs must be fi tted in pairs

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

111

FRONT QTY PART


NUMBER








5 Leaves - Raised Height (50mm Lift)Petrol - With Bull Bar OR Winch


5 Leaves - Raised Height (50mm Lift)Diesel - With Bull Bar OR Winch

11

11

11






SHOCK ABSORBER





2

2

106-4+3-R

106-5+3-R



SHACKLE BUSH KIT


U-BOLT KIT

SHOCK ABSORBER


SHACKLE KIT


PIN KIT




SHACKLE BUSH KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER



1 x UB59-449-3 (Type C) 1 UB59-449-3K

U-BOLT KIT


Right Hand Side

Left Hand Side

Type B Type C

5 Leaves - Raised Height (45mm Lift)Petrol & Diesel

11


Single Cab

Dual Cab

The following springs must be fi tted in pairs

TOY-61

Hilux

1988 - 11/1997

TOYOTA

LN/RN 105LN/YN 106Leaf Spring Suspension



TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-73

Hilux

10/1997 - 2005

TOYOTA

KZN/LN/RN 165/166/167

LN170 (2.4L TD), LN172 (3.0L D), RZN169

Single Cab, Dual Cab, Extra CabIndependent Front Suspension

TORSION BAR

SHOCK ABSORBER


Medium Duty50Kg to GVM 2 HIL-034-R


SHACKLE BUSH KIT

U-BOLT KIT

SHOCK ABSORBER

Two Stage


STEERING DAMPER





4 x SPF22314 x SPF2231A 1 PB59-1084K



Heavy Duty200Kg to GVM 2 HIL-035-R


SHACKLE KIT



TOYO

TA


PIN KIT

113

FRONT QTY PART


NUMBER



MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





TORSION BAR

SHOCK ABSORBER


Medium Duty50Kg to GVM 2 HIL-034-R


SHACKLE BUSH KIT

U-BOLT KIT

SHOCK ABSORBER

Two Stage


STEERING DAMPER





4 x SPF22314 x SPF2231A 1 PB59-1084K



Heavy Duty200Kg to GVM 2 HIL-035-R


SHACKLE KIT

TOYOTA

Hilux

Independent Front Suspension

LN/RN/YN 110, LN111 SR51988 - 1997Extra Cab

LN107 SR5, LN108, RN10609/1991 - 2005Single Cab , Dual Cab

TOY-62 TOY-70



TOYO

TA


PIN KIT

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER








TOY-84

Hilux, Vigo (150 Series)

2005 on

TOYOTA

KUN / GGN 25 / 26KZN 35 / 364x4 Single Cab, 4x4 Extra Cab,4x4 Dual Cab


Medium Duty





2

2

2

L59-040-R

L59-041-R

L59-042-R



SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-22 x UB59-453-2

2 x UB59-437

222

UB59-453-2KUB59-453-2KUB59-437K

U-BOLT KIT

SHOCK ABSORBER


SHACKLE KIT


Using L59-040-R, the longer leaf on the 2nd stage may be turnedupside down to give a softer ride

COIL SPRING

SHOCK ABSORBER





50 - 100Kg Accessories (Bullbar and Winch) 1 C59-302 (B)

Suits: L59-040-RSuits: L59-041-RSuits: L59-042-R

Single Cab 4.0L V6 Petrol KUN26 3.0L TD






Extra Cab GGN25 2.0L Petrol 3.0L TDDual Cab GGN25 V6 4.0L Petrol KUN26 3.0L TD


Vehicles fi tted with this part number MUST be fi tted with GS59-220 shock absorber.

Recommended when raising vehicle 1 BA59-002BRAKE ADJUSTER

TOYO

TA

It is a requirement that the Brake Adjuster BA59-002 be fi tted when using these leaf springs

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

115

FRONT QTY PART


NUMBER







4 Runner (1st Generation)

Pre 08/1985


11

TOY-470-R RHTOY-470-R LH





TOY-59

TOYOTA

LN60, RN60, YN60

Leaf Spring Suspension


5 Leaves - Raised Height (50mm Lift)Petrol - With Bull Bar OR Winch


5 Leaves - Raised Height (50mm Lift)Diesel - With Bull Bar OR Winch

11

11

11






SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHOCK ABSORBER

SHACKLE KIT

PIN KIT


SHACKLE BUSH KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER



1 x UB59-449-3 (Type C) 1 UB59-449-3K

U-BOLT KIT


Right Hand Side

Left Hand Side

Type B Type C



TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







Medium Load to GVM11

TOY-470-R RHTOY-470-R LH






SHACKLE BUSH KIT

U-BOLT KIT

SHOCK ABSORBER

SHACKLE KIT

PIN KIT

4 Runner

08/1985 - 1989

TOY-60

TOYOTA

LN61, YN63

Independent Front Suspension

TORSION BAR

SHOCK ABSORBER


STEERING DAMPER



Heavy Duty Twin Tube Gas 2 GS59-088 Heavy Duty Twin Tube GasMedium Load 2 GS59-649


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

117

FRONT QTY PART


NUMBER







TORSION BAR

SHOCK ABSORBER


STEERING DAMPER




4 Runner (2nd Generation)

11/1989 - 1997

TOY-63

TOYOTA

LN130, RN130, YN130,VZN130 (V6)SurfIndependent Front Suspension



UNDER BODY BUSH KIT

COIL SPRING

SHOCK ABSORBER

Heavy Duty Twin Tube Gas

Heavy Duty Twin Tube Gas (Big Bore)

2

2

GS59-223

GS59-225

2 x Rear Panhard Rod Bush2 x Rear Trailing Arm Bush 1 PB59-1254K

Kit Includes Rear Under Body Bushes


Extra Heavy Duty150Kg to GVM 1 C59-165 (B)


OR

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-83

4 Runner / Surf (3rd Generation)

1996 - 2003

TOYOTA

KZN185 3.0L TD

RZN185 2.7L Petrol, VZN185 3.4L V6

Station Wagon


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING




RZN185 / VZN185

KZN185 TD






Variable RateStandard Height 1 C59-129V (B)



Variable RateRaised Height

Heavy Duty100Kg to GVM 1 C59-137V (B)

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

119

FRONT QTY PART


NUMBER







TOY-91

4 Runner (4th Generation)

2003 - 2009

TOYOTA

GRN215, KDN215,TRN2154.0L V6 Petrol, 4.7L V8, 3.0L Diesel


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING

4.0L V6 Petrol,3.0L Diesel

4.7L V8





Extra Heavy Duty300 - 400Kg to GVM 1 C59-329 (B)


100 - 300Kg to GVM 1 C59-327 (B)

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-102

4 Runner (5th Generation)

2009 on

TOYOTA

GRN285

4.0L V6 Petrol


SHOCK ABSORBER

COIL SPRING


SHOCK ABSORBER

COIL SPRING






Extra Heavy Duty300 - 400Kg to GVM 1 C59-329 (B)


100 - 300Kg to GVM 1 C59-327 (B)

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

121

FRONT QTY PART


NUMBER







TOY-103

Tacoma (240 Series)

2005 on

TOYOTA

TRN / GRN240, 245, 250Single Cab, Extra Cab, Dual Cab4x4

COIL SPRING

SHOCK ABSORBER

Heavy Duty Gas 2 GS59-221




80 - 120kg Accessories 1 C59-300 (B)




80 - 120kg Accessories 1 C59-314 (B)

Single Cab 2.7L

Dual Cab 4.0L


Medium Duty 2 L59-110-R


Kit Contains:6 x PB59-1503 1 PB59-1101K

SHACKLE BUSH KIT


U-BOLT KIT

Heavy Duty Gas 2 GS59-940B

SHOCK ABSORBER


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-104

Tundra

03/2007 on

TOYOTA

UCK55, UPK55, USK55,UCK56, UPK56, USK564.7L, 5.7LPickup 4x4


Heavy Duty 2 L59-120-R



2 x PB59-15032 x PB59-1514 1 PB59-1102K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


COIL SPRING

SHOCK ABSORBER


Linear RateStandard Height 2 C59-478 (C)


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

123

FRONT QTY PART


NUMBER







TOY-105

Sequoia

2008 on

TOYOTA

UCK65 4.7LUSK65 5.7L4x4 Station Wagon

COIL SPRING

SHOCK ABSORBER


COIL SPRING



TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-50

Landcruiser 40 Series

1960 - 1980

TOYOTA

BJ40, FJ40, HJ40

SWB25mm Spring Eye



200Kg Accessories (Bull Bar and Winch)

2

2

HJ40-7L-F

HJ45-7L-F



SHOCK ABSORBER


25mm Longer Main Leaf 2 TOY-034-R



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT

Greasable:Fit in Pairs 2 SP59-006

PIN KIT



SHACKLE BUSH KIT

U-BOLT KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER


Kit Contains:1 x UB59-453-11 x UB59-453-3 1 UB59-450K

Kit Contains: 2 x UB59-453-3 1 UB59-453-3K

Right Hand Side

Left Hand Side


150Kg to GVM25mm Longer Main Leaf 2 TOY-029-R

25mm Spring Eye 25mm Spring Eye

Heavy Duty Twin Tube Gas 2 GS59-635Pre 01/1975

01/1975 on


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

125

FRONT QTY PART


NUMBER







TOY-52


1980 - 1984

TOYOTA

BJ42, FJ40

SWB35mm Spring Eye



200Kg Accessories (Bull Bar and Winch)

2

2

BJ42-7L-F

HJ47-7L-F



SHOCK ABSORBER





SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER



SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER






Kit Contains:1 x UB59-453-3 (Type A)

1 x UB59-449 (Type B) 1 UB59-449K

Kit Contains:2 x UB59-453-3 (Type A) 1 UB59-453-3K

Right Hand Side

Left Hand Side

Type A Type B




2

11

SK59-003

SK59-048SK59-047

SHACKLE KIT


PIN KIT


Left Hand Side (Anti-reverse)11

SK59-048SK59-047



11

SK59-013SK59-014

Use HJ47 Shackle Kits (Left & Right).Slightly longer than original. Assists lift on the rear.


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-53


Pre 08/1980

TOYOTA

FJ45, HJ45

LWB Pickup, Troop CarrierNote Spring Eye Sizes


No Accessories


Heavy Duty50 - 80Kg Accessories (Bull Bar and Winch)

(Recommended)

2

2

HJ45-7L-F

HJ45-8L-F



SHOCK ABSORBER


11

HJ45-6+3-R RHHJ45-6+3-R LH


Kit Contains:12 x SPF2231A 1 PB59-1014K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER



11

SK59-016SK59-015

SHACKLE KIT


PIN KIT



SHACKLE BUSH KIT

U-BOLT KIT


SHACKLE KIT


PIN KIT

STEERING DAMPER




Right Hand Side

Left Hand Side



11

HJ45-7+3-R RHHJ45-7+3-R LH



TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

127

FRONT QTY PART


NUMBER







TOY-54


07/1980 - 1985

TOYOTA

FJ45, HJ47, BJ45, BJ46

LWB Pickup, Troop Carrier35mm Spring Eye



Heavy Duty40Kg Accessories (Bull Bar OR Winch)

(Recommended)

2

2

HJ47-7L-F

HJ47-8L-F



11

HJ47-6+3-R RHHJ47-6+3-R LH





11

HJ47-7+3-R RHHJ47-7+3-R LH



SHOCK ABSORBER


SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER


Kit Contains:1 x UB59-453-3 (Type A)

1 x UB59-449 (Type B) 1 UB59-449K

Kit Contains:2 x UB59-453-3 (Type A) 1 UB59-453-3K

Right Hand Side

Left Hand Side

Type A Type B




2

11

SK59-003

SK59-048SK59-047

SHACKLE KIT


PIN KIT



SK59-048SK59-047



11

SK59-013SK59-014


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Heavy Duty Twin Tube Gas(Big Bore) Long Travel 2 GS59-703


Super Heavy Duty500Kg to GVM 2 HJ75-8+2-R

TOY-58


11/1984 - 01/1990

TOYOTA

FJ75, HJ75, BJ75

Pickup, Troop Carrier


No Accessories


Heavy Duty40 - 70Kg Accessories (Bull Bar OR Winch)

(Recommended)

2

2

HJ75-7L-F

HJ75-8L-F



Light Load to GVM 2 HJ75-6+2-R




Heavy Duty300Kg to GVM 2 HJ75-7+2-R


SHOCK ABSORBER


SHACKLE BUSH KIT


U-BOLT KIT

SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER






2

11

SK59-003

SK59-048SK59-047

SHACKLE KIT


PIN KIT



SK59-048SK59-047



Heavy Duty Twin Tube Gas(Big Bore) 2 GS59-079


TOYO

TA

Soft Option Twin Tube Gas(Big Bore) Not For Loaded Vehicles 2 GS45-115


MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

129

FRONT QTY PART


NUMBER







7 Leaves + 1 SpacerRaised Height (50mm Lift)

11

L59-071-R RHL59-071-R LH


SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-3 2 UB59-453-3K

U-BOLT KIT

SHOCK ABSORBER

COIL SPRING


50Kg Accessories (Bullbar) 1 C59-250 (B)

Variable RateStandard Height 1 C59-454 (B)

Linear Rate, Comfort OptionRaised Height (40mm Lift)

With No Accessories 1 C59-246 (B)

SHOCK ABSORBER


STEERING DAMPER

UNDER BODY BUSH KIT

CASTOR KIT




2 x Front Panhard Rod Bush2 x Front Leading Arm to Diff Bush4 x Front Leading Arm to Chassis Bush 1 PB59-1261K

Kit Includes Front Under Body Bushes


TOY-108


08/2009 on

TOYOTA

GRJ71, HZJ71

SWB

Heavy Duty Twin Tube Gas (Big Bore)Long Travel 2 GS59-703




SHACKLE KIT

PIN KIT



Up to 100Kg Accessories (Bullbar and Winch) 1 C59-248 (B)


7 Leaves + 1 SpacerRaised Height (50mm Lift)

250-350Kg to GVM11

L59-074-R RHL59-074-R LH

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







Super Heavy Duty500Kg to GVM 2 HZJ75-8+2-R

TOY-67


1990 - 09/1999

TOYOTA

FZJ75, HZJ75

Pickup, Troop Carrier. Disc Brake Rear EndFor model with Rear Drum Brake (Pre 10/1991)

use rear spring part number HJ75-6+2-R


No Accessories


Heavy Duty40 - 70Kg Accessories (Bull Bar OR Winch)

(Recommended)

2

2

HJ75-7L-F

HZJ75-8L-F



Light Load to GVM 2 HZJ75-6+2-R




Heavy Duty300Kg to GVM 2 HZJ75-7+2-R


SHOCK ABSORBER


SHACKLE BUSH KIT


U-BOLT KIT

SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER






2

11

SK59-018

SK59-048SK59-047

SHACKLE KIT


PIN KIT



SK59-048SK59-047




Heavy Duty Twin Tube Gas(Big Bore)

Long Travel 2 GS59-703


TOYO

TA



131

FRONT QTY PART


NUMBER



MAKE:

TYPE:

MODEL:YEAR:

MODEL:YEAR:





COIL SPRING

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114STEERING DAMPER


FZJ79, HZJ79, VDJ79 (04/2007 on)


FZJ79, HZJ79 (to 04/2007)

UNDER BODY BUSH KIT

CASTOR KIT




6 + 2 Leaves - Comfort SpringRaised Height (45mm Lift) Light Load to GVM 2 TOY-078-R


Super Heavy Duty50 - 110Kg Accessories (Bull Bar and Winch) 1 C59-252 (B)

6 + 2 Leaves - Standard DutyRaised Height (50mm Lift) Medium Load to GVM 2 TOY-082-R

7 + 2 Leaves - Heavy DutyRaised Height (50mm Lift) 300 Kg to GVM 2 TOY-083-R

8 + 2 Leaves - Super Heavy DutyRaised Height (50mm Lift) 500 Kg to GVM 2 TOY-084-R

9 + 2 Leaves - Super Heavy DutyRaised Height (50mm Lift) 800 Kg to GVM 2 TOY-085-R

8 + 3 Leaves - Super Heavy DutyRaised Height (50mm Lift) 1,200 Kg to GVM 2 TOY-088-R



Linear RateStandard Height

Up to 50 Kg Accessories (Bull Bar OR Winch) 1 C59-250 (B)


Up to 50 Kg Accessories (Bull Bar OR Winch) 1 C59-248 (B)


4 x SPF1782 1PB59-1089K

SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-12 x UB59-453-1

2 x UB59-4162 X UB59-4162 x UB59-9142 x UB59-914

222222

UB59-453-1KUB59-453-1KUB59-416KUB59-416KUB59-914KUB59-914K

U-BOLT KIT

Heavy Duty Twin Tube Gas (Big Bore)

Heavy Duty Twin Tube Gas (Big Bore)Long Travel

2

2

GS59-079

GS59-703

SHOCK ABSORBER



2

2

SK59-043

SK59-051

SHACKLE KIT

TOY-078-RTOY-082-RTOY-083-RTOY-084-RTOY-085-RTOY-088-R

Kit Contains:8 x SPF17984 x SPF1781 1

PB59-1100K



to 07/2009

08/2009 onAir Bag Dash

PIN KIT



2

2

SP59-044

SP59-057

to 07/2009


TOYOTA

Landcruiser78 Series

Front Coil SpringSuspension

FZJ79, HZJ79

09/1999 - 04/2007

Pickup

FZJ79, HZJ79, HDJ79, VDJ79

04/2007 on

4.5 L Turbo Diesel Pickup

TOY-78 TOY-78


pre 07/2009

08/2009 on

TOYO

TA



MAKE:

MODEL:

DETAIL:

TYPE:

132

FRONT QTY PART


NUMBER








Standard Duty Light Load to GVM

7+2 LeavesRaised Height (50mm Lift)Heavy Duty 300Kg to GVM


Super Heavy Duty 500Kg to GVM

2

2

2

TOY-082-R

TOY-083-R

TOY-084-R


Kit Contains:4 x SPF17812 x SPF17824 x SPF1798 1

PB59-1090Kpre 07/2009

SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-12 x UB59-4162 x UB59-416

222

UB59-453-1KUB59-416KUB59-416K

U-BOLT KIT

SHOCK ABSORBER


COIL SPRING


Super Heavy Duty50 - 110Kg Accessories (Bullbar and Winch) 1 C59-252 (B)

Suits: TOY-082-RSuits: TOY-083-RSuits: TOY-084-R

Linear RateStandard Height

Up to 50 Kg Accessories (Bullbar OR Winch) 1 C59-250 (B)



SHOCK ABSORBER



FZJ78, HZJ78, VDJ78 (04/2007 on)


FZJ78, HZJ78 (to 04/2007)

UNDER BODY BUSH KIT

CASTOR KIT







TOY-81

Landcruiser 78 SeriesTOYOTA

FZJ78, HZJ78 (Year: 09/1999 - 04/2007)

FZJ78, HZJ78, VDJ78 V8 Diesel (Year: 04/2007 on)

Troop Carrier

Heavy Duty Twin Tube Gas (Big Bore)Long Travel 2 GS59-703

Recommended when raising vehicle 1 BA59-001

BRAKE ADJUSTER

TOYO

TA


Kit Contains:8 x SPF17984 x SPF1781 1

PB59-1100K08/2009 on

SHACKLE KIT

PIN KIT



2

2

SP59-044

SP59-057

to 07/2009




MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

133

FRONT QTY PART


NUMBER








Standard Duty





2

2

2

L59-020-R

L59-021-R

L59-022-R


Kit Contains:4 x SPF1781 2 x SPF17824 x SPF1798 1 PB59-1090K

SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-32 x UB59-453-32 x UB59-453-1

222

UB59-453-3KUB59-453-3KUB59-453-1K

U-BOLT KIT

SHOCK ABSORBER


SHACKLE KIT

Two StageCOIL SPRING


Comfort OptionNo Accessories 1 C59-246 (B)




SHOCK ABSORBER



UNDER BODY BUSH KIT

CASTOR KIT






Heavy Duty Twin Tube GasLong Travel (Big Bore) 2 GS59-703

PIN KIT






TOY-95


04/2007 on

TOYOTA

FZJ76, HZJ76, VDJ76

Station Wagon V8 Turbo Diesel

TOYO

TA


MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-51


1970 - 1980

TOYOTA

FJ55

Station Wagon

6 LeavesRaised Height (45mm Lift) 2 TOY-055-F



SHOCK ABSORBER


SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER



11

SK59-015SK59-016

SHACKLE KIT


SHACKLE BUSH KIT

U-BOLT KIT



11

SK59-015SK59-016

SHACKLE KIT

STEERING DAMPER




Right Hand Side

Left Hand Side

8 LeavesRaised Height (45mm Lift) 2 TOY-056-R


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

135

FRONT QTY PART


NUMBER







TOY-55


1980 - 1990

TOYOTA

FJ60, FJ62, HJ60, HJ61

Station Wagon


Petrol (No Accessories)


Petrol - With AccessoriesDiesel (No Accessories)



7 Leaves RaisedHeight (45mm Lift)

2

2

2

2

HJ60-5L-F

HJ60-6L-F

HJ60-7L-F

HJ61-7L-F



SHOCK ABSORBER


Plus 1 Spacer Leaf11

HJ60-7L-R RHHJ60-7L-R LH



SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER



SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER



Plus 1 Spacer Leaf11






2

11

SK59-003

SK59-048SK59-047

SHACKLE KIT


PIN KIT



SK59-048SK59-047


For LH Drive vehiclesfi t the higher camber spring to the LH side of the vehicle

OR

HJ61 Turbo Diesel


Heavy Duty300 Kg to GVM

11



Pre 10/1985 (Chassis No. < 33417)

10/1985 on (Chassis No. > 33418)

HJ61 Turbo Diesel

TOYO

TA


MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER








TOY-68


05/1990 - 08/1991

TOYOTA

FJ80, HDJ80, HZJ80

Station Wagon

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT


COIL SPRING

SHOCK ABSORBER


2 x Front Radius Arm to Chassis Bush4 x Front Leading Arm Bush2 x Front Panhard Rod Bush4 x Rear Upper Trailing Arm Bush4 x Rear Lower Trailing Arm Bush2 x Rear Panhard Rod Bush 1 PB59-1258K


Up to 50Kg Accessories (Bull Bar OR Winch)(Recommended) 1 C59-166 (B)







Extra Heavy Duty350Kg to GVM 1 C59-171 (C)






TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

137

FRONT QTY PART


NUMBER








Comfort Spring - Petrol OnlyUp to 50Kg Accessories (Bullbar OR Winch) 1 C59-234 (B)

TOY-69


08/1991 - 1998

TOYOTA

FJ80, FZJ80, HZJ80

Station Wagon

COIL SPRING

SHOCK ABSORBER



STEERING DAMPER


UNDER BODY BUSH KIT




COIL SPRING



Up to 50Kg Accessories (Bullbar OR Winch) 1 C59-220V (B)Variable Rate

Raised Height (40mm Lift)50 - 100Kg Accessories (Bullbar and Winch) 1 C59-222V (B)



Up to 50Kg Accessories (Bullbar OR Winch)(Recommended) 1 C59-168 (B)


Up to 100Kg Accessories Raised Height (60mm Lift)



Up to 50Kg Accessories (Bullbar OR Winch) 1 C59-176 (B)

UNDER BODY BUSH KIT

SHOCK ABSORBER





350Kg to GVM 1 C59-171 (C)



Comfort Spring - Petrol OnlyLight Load to GVM 1 C59-269V (B)







Medium Load to GVM 1 C59-185 (C)



OR

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-88

Landcruiser

08/1991 on

TOYOTA

FZJ/HZJ/HDJ 80/105

Station Wagon100mm (4” Lift)150mm (6” Lift)

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT

STEERING DAMPER


CASTOR KIT








Extra Heavy Duty 1 C59-308 (C)

Linear RateRaised Height (6” Lift) 1 C59-310 (C)



11

PR59-1404PR59-1408

RH DriveLH Drive

COIL SPRING

SHOCK ABSORBER

Linear RateRaised Height (4” Lift) 1 C59-171 (C)


Extra Heavy Duty 1 C59-309 (C)






Heavy Duty Twin Tube Gas 2 GS59-687100mm (4” Lift)

150mm (6” Lift)


Extra Heavy Duty400Kg to GVM 1 C59-311 (C)


Heavy Duty Twin Tube Gas 2 GS45-912100mm (4” Lift)

150mm (6” Lift)








TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

139

FRONT QTY PART


NUMBER








350Kg to GVM 1 C59-171 (C)

TOY-74


04/1998 on

TOYOTA

FZJ105R, HZJ105R

Station Wagon GX and GXLCoil Spring Suspension

COIL SPRING

SHOCK ABSORBER



STEERING DAMPER


UNDER BODY BUSH KIT




COIL SPRING



Comfort SpringPetrol Only



Up to 50Kg Accessories (Bullbar OR Winch)(Recommended) 1 C59-168 (B)


60 - 100Kg Accessories Raised Height (60mm Lift)


UNDER BODY BUSH KIT

SHOCK ABSORBER






Comfort Spring - Petrol OnlyLight Load to GVM 1 C59-269V (B)


Medium Load to GVM 1 C59-185 (C)




OR




60 - 100Kg Accessories Raised Height (60mm Lift)

No Accessories 1 C59-167 (B)OR

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







400Kg to GVM 1 C59-171 (C)


Medium Load to GVMRecommended 1 C59-167 (B)

Linear RateStandard Height (10mm Lift)


TOY-75


1998 - 11/2007

TOYOTA

HDJ100, HZJ100,UZJ100Petrol and DieselIndependent Front Suspension

TORSION BAR

SHOCK ABSORBER

Diesel / Turbo Diesel / 6 Cyl. Petrol

V8 Petrol








UNDER BODY BUSH KIT

COIL SPRING

SHOCK ABSORBER

Kit Includes Rear Bushes Only

2 x Panhard Rod Bush4 x Rear Upper Trailing Arm Bush4 x Rear Lower Trailng Arm Bush 1 PB59-1259K


200Kg to GVM 1 C59-185 (C)


TOYO

TA

This vehicle is fi tted standard with a Hydraulic Ride System. To convert this system to a conventional suspension system, a COMPLETE KIT must be fi tted.

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

141

FRONT QTY PART


NUMBER








400Kg to GVM 1 C59-547 (B)

TOY-96


11/2007 on

TOYOTA

UZJ/URJ/GRJ/VDJ 200

Station Wagon

COIL SPRING

SHOCK ABSORBER

Linear RateStandard Height 1 C59-536 (C)

Extra Heavy Duty Twin Tube Gas 2 GS59-690

COIL SPRING

SHOCK ABSORBER




100 - 200Kg to GVM 1 C59-545 (B)


500Kg to GVM 1 C59-549 (B)

OR


80 - 120Kg Accessories (Bullbar OR Winch) 1 C59-544 (B)



GRJ200 4.0L 6 Cyl. Petrol

UZJ200 4.7L V8 PetrolURJ200 5.7L V8 Petrol




80 - 120Kg Accessories (Bullbar OR Winch) 1 C59-568 (B)

VDJ200 4.5L Twin TurboV8 Diesel


TOYO

TA

Extra Heavy Duty Twin Tube GasMonster Shock

45mm Piston, 70mm Body 2 GS59-734

OR





No Load to GVM 1 C59-545 (B)


300Kg to GVM 1 C59-547 (B)

Extra Heavy Duty Twin Tube GasMonster Shock

45mm Piston, 70mm Body 2 GS59-698

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER








11


TOY-57


1985 - 12/1989

TOYOTA

FJ/BJ 70, BJ71,FJ/BJ 73, FJ/BJ 74Mid Wheel Base




2

2

HJ75-7L-F

HJ75-8L-F


7 LeavesPlus 1 Spacer Leaf





11



SHOCK ABSORBER


SHACKLE BUSH KIT


U-BOLT KIT

Softer Option Twin Tube Gas 2 GS59-650

SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER






2

11

SK59-003

SK59-048SK59-047

SHACKLE KIT


PIN KIT



SK59-048SK59-047



LEAF SPRINGSingle StageSingle Stage

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

143

FRONT QTY PART


NUMBER









11


TOY-66


1990 - 1999

TOYOTA

HZJ70, HZJ73,PZJ70, PZJ73Mid Wheel Base




2

2

HJ75-7L-F

HZJ75-8L-F







11



SHOCK ABSORBER


SHACKLE BUSH KIT


U-BOLT KIT

Softer Option Twin Tube Gas 2 GS59-650

SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER






2

11

SK59-003

SK59-048SK59-047

SHACKLE KIT


PIN KIT



SK59-048SK59-047




TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Kit Contains:4 x SPF1781 2 x SPF17824 x SPF1798 1 PB59-1090K

SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-3 2 UB59-453-3K

U-BOLT KIT

SHOCK ABSORBER


SHACKLE KIT

COIL SPRING


Comfort OptionUp to 50 Kg Accessories (Bullbar OR Winch) 1 C59-246 (B)


SHOCK ABSORBER


STEERING DAMPER


UNDER BODY BUSH KIT

CASTOR KIT







PIN KIT






TOY-87

Landcruiser

1999 - 2004

TOYOTA

SWB - FZJ71, HZJ71MWB - FZJ74, HZJ74LWB - FZJ76, HZJ76




L59-071-R RHL59-071-R LH



L59-074-R RHL59-074-R LH

FZJ/HZJ 71 SWB

FZJ/HZJ 74 MWB


Heavy Duty Twin Tube GasLight Load 2 GS59-649

71 SWB + 74 MWB2 x UB59-453-3 2 UB59-453-1K76 LWB


250Kg to GVM11

L59-076-R RHL59-076-R LH

FZJ/HZJ 76 LWB

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

145

FRONT QTY PART


NUMBER








Standard DutyNo Load to GVM





2

2

2

L59-020-R

L59-021-R

L59-022-R



SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-32 x UB59-453-32 x UB59-453-1

222

UB59-453-3KUB59-453-3KUB59-453-1K

U-BOLT KIT

SHOCK ABSORBER

SHACKLE KIT




PIN KIT


TOY-98

Landcruiser

1993 - 1999

TOYOTA

FZJ77, HZJ77, PZJ77

Station Wagon. 5 Door.

Soft Option Twin Tube GasBig Bore (Not for Loaded Vehicles) 2 GS45-115



SK59-048SK59-047





Up to 80Kg Accessories (Bull Bar OR Winch)

2

2

2

HZJ75-7L-F

HZJ75-8L-F

HJ75-8L-F



SHOCK ABSORBER


SHACKLE BUSH KIT

U-BOLT KIT

SHACKLE KIT


PIN KIT

STEERING DAMPER






2

11

SK59-018

SK59-048SK59-047

TOYO

TA

Heavy Duty Twin Tube GasBig Bore Long Travel 2 GS59-703

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER








Meduium Load to GVM 1 C59-083 (B)



TOY-64

Landcruiser 70 SeriesBundera11/1984 - 12/1989

TOYOTA

LJ70, LJ73, RJ70, RJ73

Round Headlights

COIL SPRING

UNDER BODY BUSH KIT


UNDER BODY BUSH KIT

CASTOR KIT

Front Radius Arm Castor Kit (±2.5°)

4 x Polyurethane Bushes Complete with steel inner sleeve (+1 Grease Tube) 1 WA59-512K

COIL SPRING

2 x Front Radius Arm to Chassis Bush4 x Front Radius Arm to Diff Bush2 x Front Panhard Rod Bush2 x Rear Radius Arm to Chassis Bush4 x Rear Radius Arm to Diff Bush2 x Rear Panhard Rod Bush 1 PB59-1255K




SHOCK ABSORBER





SHOCK ABSORBER KIT


STEERING DAMPER


Kit Contains:2 Different Part Numbers

Heavy Duty Twin Tube GasBig Bore

1 x GS59-651 (Type A)1 x GS45-640 (Type B) 1 GS59-652K


Type A Type B

This vehicle has 2 different shock absorbers on the rear

When ordering only one side, please make sure that the correct part

number is ordered

TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

147

FRONT QTY PART


NUMBER








TOY-65


01/1990 - 05/1993

TOYOTA

LJ70, LJ72, LJ73, LJ77,(RJ70, RJ73, KZJ 70/73 - 1994 on)Square Headlights

COIL SPRING

SHOCK ABSORBER


COIL SPRING



Linear RateSuper Raised Height (60mm Lift)

Up to 50Kg Accessories (Bull Bar and Winch)(Recommended) 1 C59-244 (B)


To be used with original Toyota springs OR C59-288





UNDER BODY BUSH KIT





Left Hand Drive

SHOCK ABSORBER







To be used with original Toyota springs OR C59-289


STEERING DAMPER


UNDER BODY BUSH KIT

2 x Front Radius Rod to Chassis Bush4 x Front Radius Rod to Diff Bush2 x Front Panhard Rod Bush2 x Rear Radius Rod to Chassis Bush4 x Rear Radius Rod to Diff Bush2 x Rear Panhard Rod Bush 1 PB59-1260K


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







TOY-79

70 Series Prado ILandcruiser II1987 - 1996

TOYOTA

LJ78/79, RJ77, KZJ78

Station Wagon SX52.4L Petrol, 2.4L TD

COIL SPRING

SHOCK ABSORBER


COIL SPRING




Up to 50Kg Accessories (Bull Bar and Winch)(Recommended) 1 C59-244 (B)


To be used with original Toyota springs OR C59-290, C59-288, C59-206





UNDER BODY BUSH KIT





Left Hand Drive

SHOCK ABSORBER







To be used with original Toyota springs OR C59-291, C59-289


STEERING DAMPER


UNDER BODY BUSH KIT

2 x Front Radius Rod to Chassis Bush4 x Front Radius Rod to Diff Bush2 x Front Panhard Rod Bush2 x Rear Radius Rod to Chassis Bush4 x Rear Radius Rod to Diff Bush2 x Rear Panhard Rod Bush 1 PB59-1260K






TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

149

FRONT QTY PART


NUMBER







Linear RateRaised Height

Extra Extra Extra Heavy Duty300Kg to GVM 1 C59-303 (B)

TOY-72

Landcruiser 90 SeriesPrado1996 - 2003

TOYOTA

RZN/VZN/KZN/KDJ 90 SWB

RZN/VZN/KZN/KDJ 95 LWB

Station Wagon

COIL SPRING

SHOCK ABSORBERUNDER BODY BUSH KIT


COIL SPRING

SHOCK ABSORBER


2 x Rear Panhard Rod Bush4 x Rear Lower Trailing Arm Bush4 x Rear Upper Trailing Arm Bush 1 PB59-1256K



SWB RZJ90 2.7L PetrolVZJ90 3.4L V6KZJ90 3.0L T/Diesel





Kit Includes Rear Under Body Bushes Only


Extra Extra Heavy Duty150Kg to GVM 1 C59-297V (B)



KDJ90 3.0L T/Diesel




LWB RZJ95 2.7L PetrolVZJ95 3.4L V6





KZJ95 3.0L T/DieselKDJ95 3.0L T/Diesel







TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER







400 - 500Kg to GVM 1 C59-331 (B)

TOY-82

Landcruiser 120 SeriesPrado2003 - 11/2009

TOYOTA

RZJ/VZJ/KZJ/KDJ 125

RZJ/VZJ/GRJ/KZJ/KDJ 120, VZJ/KDJ 121

Station WagonSWB & LWB

COIL SPRING

SHOCK ABSORBER

UNDER BODY BUSH KIT


COIL SPRING

SHOCK ABSORBER


2 x Front Control Arm Lower Inner Front2 x Front Control Arm Lower Inner Rear4 x Front Control Upper Inner2 x Rear Panhard Rod Bush4 x Rear Trailing Arm Lower4 x Rear Trailing Arm Upper 1 PB59-1263K



SWB RZJ125 2.7L Petrol VZJ125 3.4L V6 KZJ125 3.0L T/Diesel

Kit Includes Front and Rear Under Body Bushes



KDJ125 3.0L T/Diesel




LWB RZJ120 2.7L Petrol

GRJ120 4.0L V6 KDJ120/121 3.0L T/Diesel




VZJ120/121 3.4L V6




KZJ120 3.0L T/DieselLinear Rate




UNDER BODY BUSH KIT

See Rear Under Body Bushes Kit

SWBLinear Rate



60 - 100Kg to GVM 1 C59-325 (B)


100 - 300Kg to GVM 1 C59-327 (B)

LWBLinear Rate

Standard Height 1 C59-323 (B)


100 - 300Kg to GVM 1 C59-327 (B)


300 - 400Kg to GVM 1 C59-329 (B)


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

151

FRONT QTY PART


NUMBER








100 - 300Kg to GVM 1 C59-327 (B)

TOY-100

TOYOTA

KDJ150, GRJ150,KDJ155Station Wagon.SWB & LWB.

Landcruiser 150 SeriesPrado2010 on

COIL SPRING

Extra Heavy Duty Twin Tube Gas 2 GS59-637

SHOCK ABSORBER

COIL SPRING

SHOCK ABSORBER


SWB & LWB Petrol Without KDSS

SWB & LWB Diesel Without KDSS








SWB Without KDSS

LWB Without KDSS



60 - 100Kg to GVM 1 C59-325 (B)



300 - 400Kg to GVM 1 C59-329 (B)


100 - 300Kg to GVM 1 C59-327 (B)

TOYO

TA

LWB With KDSSLinear Rate



300 - 400Kg to GVM 1 C59-729 (B)


100 - 300Kg to GVM 1 C59-727 (B)

SWB & LWB With KDSS




KDSS = Kinetic Dynamic Suspension System




MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






TOY-85

Fortuner

2005 on

TOYOTA

KUN / TGN 51

2.7L Petrol TGN51, 3.0L Diesel KUN514.0L Petrol (South America)

COIL SPRING

SHOCK ABSORBER





2.7L Petrol





3.0L Diesel, 4.0L Petrol


Vehicles fi tted with this part number MUST be fi tted with GS59-220 shock absorber.

Linear RateStandard HeightComfort Option 1 C59-338 (B)


Comfort Option 1 C59-316 (B)

COIL SPRING

SHOCK ABSORBER



Comfort Option 1 C59-875 (B)


Linear RateStandard HeightComfort Option 1 C59-377 (B)

TOYO

TA


MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

153

FRONT QTY PART


NUMBER







TOY-94

FJ Cruiser

2006 on

TOYOTA

4.0L V6

COIL SPRING

SHOCK ABSORBER



Up to 100Kg Accessories (Bullbar and Winch) 1 C59-302 (B)


COIL SPRING

SHOCK ABSORBER




100 - 300Kg to GVM 1 C59-329 (B)



TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

154

FRONT QTY PART


NUMBER







TOY-71

TOYOTA

SXA10, SXA11 (Year: 1993 - 05/2000)

ACA20, 21, 22, 23 (Year: 05/2000 - 2006)

ACA33 (Year: 2006 on)

3 Doors and 5 Doors

Rav 4

COIL SPRING


SHOCK ABSORBER

COIL SPRING

SHOCK ABSORBER

Heavy Duty Twin Tube Gas Strut11

GS59-927 RHGS59-927 LH

1993 - 05/2000SXA10 - 3 DoorSXA11 - 5 Door

05/2000 - 2006ACA20 2.0L 3 DoorACA21 2.0L 5 DoorACA22R 2.4L 3 DoorACA23R 2.4L 5 Door



05/2000 on 2.0L DieselLinear Rate

Raised Height 1 C59-364 (B)

2006 onACA33


1993 - 2006 (NOT for 2006 on)

1993 - 2006 (NOT for 2006 on)

1993 - 05/2000SXA10 - 3 Door

05/2000 - 2006ACA20 2.0L 3 DoorACA21 2.0L 5 DoorACA22R 2.4L 3 DoorACA23R 2.4L 5 Door



1993 - 05/2000SXA10 - 5 Door


2006 onACA33


TOYO

TA

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:

155

FRONT QTY PART


NUMBER







UAZ

UAZ-52

Patriot

2005 on

UAZ

Station Wagon

4+2 LeavesRaised Height (50mm Lift) 2 UAZ-006-R


Kit Contains:12 x PB62-1512 1 PB62-1097K

SHACKLE BUSH KIT


U-BOLT KIT


SHOCK ABSORBER


SHACKLE KIT


There are two different spring types on offer for this vehicle

COIL SPRING

SHOCK ABSORBER






STEERING DAMPER




60Kg to GVM 2 UAZ-004-R

UA

Z

MAKE:

MODEL:

DETAIL:

TYPE:

YEAR:


FRONT QTY PART


NUMBER






Volkswagen

VOLK-51

VOLKSWAGEN

4x4Independant Front Suspension

Amarok

2010 on

COIL SPRING


300kg to GVM 2 L63-037-R



SHACKLE BUSH KIT

Kit Contains:

2 x UB59-453-3

2 x UB59-453-12 x UB59-453-1

2

22

UB59-453-3K

UB59-453-1KUB59-453-1K

U-BOLT KIT


SHOCK ABSORBER

SHOCK ABSORBER





Lifting the vehicle above 35mm may affect the c.v. joints



Medium Duty 2 L63-035-R


Light Duty 2 L63-033-R

VOLK

SWAG

EN

L63-033-R

L63-035-RL63-037-R

TDI400 CAB CHASSIS & UTILITY





TDI400 & 420 DUAL CABTDI400 & 420 DUAL CAB CHASSISTDI400 & 420 ALL TRENDLINEMODELS





TDI400 & 420 ALL HIGHLINE &ULTIMATE MODELS

DETAIL:

157

FRONT QTY PART


NUMBER





Coil SpacersHolden, Jeep, Landrover, Nissan, Suzuki, Toyota

IMPORTANT NOTICE:

Adding Coil Spring Spacers to the Vehicle may cause “Coil Bind” (all coils closed together) before the bump stop comes into effect. This can cause very serious damage to the spring and/or suspension components.

15mm30mm

11

PS29-4014PS29-4015

JEEPWrangler TJ (1996 - 2005)Cherokee XJ (1994 - 2001)

5mm10mm20mm30mm

1111

PS59-4001PS59-4002PS59-4003PS59-4004

LANDROVER90, 110 (1984 - 1991)

Defender 90, 110, 130 (1992 - 1999)Discovery (1991 - 1999)

Range Rover (1970 - 1999)

15mm30mm

11

PS45-4010PS45-4011

NISSANGQ - GU

15mm30mm

11

PS29-4014PS29-4015

SUZUKIVitara JLX (1988 - 1997)

5mm10mm20mm30mm

1111

PS59-4001PS59-4002PS59-4003PS59-4004

TOYOTA80 Series

100 Series (Non IFS)

10mm30mm

11

PS21-4008PS21-4009

76, 78, 79 Series

10mm15mm30mm

111

PS29-4016PS29-4017PS29-4018

JEEPWrangler TJ (1996 - 2005)

5mm10mm20mm30mm

1111

PS59-4001PS59-4002PS59-4003PS59-4004

LANDROVER

Discovery (1991 - 1999)Range Rover (1970 - 1999)

15mm30mm

11

PS45-4012PS45-4013

NISSANGQ - GU

15mm30mm

11

PS29-4014PS29-4015

SUZUKIVitara JLX (1988 - 1997)

10mm15mm30mm

111

PS59-4005PS59-4006PS59-4007

TOYOTA80 Series100 Serie

Lexus LX470 4WD Wagon

20mm30mm

11

PS51-4019PS51-4020

Prado 90 Series

10mm30mm

11

PS21-4008PS21-4009

HOLDENJackaroo UBS25, UBS69

COIL SPACERS

158


Terms & Condi ons

InterpretationIn these Terms and Conditions of Sale (“Terms”), “Goods” means the goods subject of the Contract; “Dobinsons Spring & SuspensionTM” means the entity selling the Goods; “Client” means the entity purchasing the Goods; “Contract” means each contract between Dobinsons Spring & SuspensionTM and Client for the sale and purchase of Goods.

TitleTitle to the goods will not pass to the Client until the following is completed:1. Dobinsons Spring & SuspensionTM being paid in full under all Contracts.

Until the Goods pass to Client, Client must:1. Hold the Goods as bail for Dobinsons Spring & SuspensionTM and keep them in good order and condition; and2. Not remove any markings placed by Dobinsons Spring & SuspensionTM and ensure that the Goods can be readily identifi ed and distinguished from other property in Client’s possession; and3. Deliver the Goods to Dobinsons Spring & SuspensionTM immediately upon demand and, for this purpose, Dobinsons Spring & SuspensionTM is authorized to enter at any time any premises in which the Goods may be located (the costs incidental to which will be borne by Client).

Quotations & OrdersAny quotation made by Dobinsons Spring & SuspensionTM will not be construed or operate as an offer or obligation to sell. Dobinsons Spring & SuspensionTM reserve the right to accept or reject in its absolute discretion any order received. Client will not be entitled to cancel or refuse delivery of, or payment for, any order made by him, which has been accepted by Dobinsons Spring & SuspensionTM.

PriceThe price payable to Dobinsons Spring & SuspensionTM by Client for the Goods will be the price agreed, failing which it will be the price prevailing at the date the Goods are dispatched by Dobinsons Spring & SuspensionTM for delivery to Client. Prices are payable in Australian currency and exclusive of delivery costs, taxes, duties and other imposts which, if chargeable, are payable by Client. Prices quoted in any Dobinsons Spring & SuspensionTM price list are suggested prices only and may be changed by Dobinsons Spring & SuspensionTM without notice.

PaymentAll Goods will be paid for in full before receiving or dispatching of Goods from Dobinsons Spring & SuspensionTM unless previously arranged.

DamageBuyer acknowledges that the Goods leaving Dobinsons Spring & Suspension’s premises are adequately packed. Claims for damage in transit must be made against the carrier and, while Dobinsons Spring & SuspensionTM will not accept liability for any damage, details of any claim must be promptly advised to Dobinsons Spring & Suspension M. Prior to acknowledging delivery to the carrier, Client must ensure that the complete consignment has been received as specifi ed in the carrier’s note. Any shortage or visible damage to outer packaging must be endorsed on the carrier’s note. Any shortages and/or damages must be reported to Dobinsons Spring & SuspensionTM within 72 hours of receipt.

Implied Terms, Limitation of Liability & Client IndemnitySubject to these Terms, Dobinsons Spring & SuspensionTM will not be liable for any loss, damage, expense or injury of any kind or nature suffered or incurred by Client or any other person, arising out of or in connection with, the Contract (including, without limitation, liability due to negligence or wilful default of Dobinsons Spring & SuspensionTM and any delay in delivery) or any error (whether negligent or not) in information supplied to Client in connection with its subject matter or the use, possession or delivery of the Goods or the exercise by Dobinsons Spring & SuspensionTM of its right under Breach by Client will indemnify Dobinsons Spring & SuspensionTM in relation to any such loss, damage, expense or injury.

Force MajeureDespite any other term or condition of the Contract, Dobinsons Spring & SuspensionTM will not be liable for any loss, damage, expense or injury of any kind or nature suffered or incurred by Client or any other person, arising out of or in connection with any delay in delivery, or failure to perform any other term or condition of the Contract where that delay or failure is caused by an act of God, fi re, labour dispute, civil commotion, intervention of a government, inability to obtain labour, materials or manufacturing facilities, accidents, interruptions of or delay in transportation or any other cause beyond Dobinsons Spring & Suspension’s reasonable control.

Breach by ClientIf Client breaches a Contract or Dobinsons Spring & SuspensionTM is not satisfi ed of a Client’s ability to pay or otherwise comply with each Contract, Dobinsons Spring & SuspensionTM may by notice to Client, but without compensation, terminate every Contract, suspend or cease deliveries under all Contracts, set-off all deposits against amounts due and make all amounts then outstanding by Client to Dobinsons Spring & SuspensionTM immediately due and payable.

Terms & Conditions of Sale

TERM

S O

F SA

LE

159


Errors and OmissionsDobinsons Spring & SuspensionTM has the right to correct any clerical errors or omissions, whether in computation or otherwise in any quotation, acknowledgment, or document forming part of a Contract. Although care has been taken to ensure the accuracy of the data contained in this publication, Dobinsons Spring & SuspensionTM does not assume any liability for errors or omissions.

WarrantiesDobinsons Spring & SuspensionTM at its sole discretion will repair or replace any products supplied by them that are found to be defective in either materials or workmanship providing that Dobinsons Spring & SuspensionTM are actually notifi ed in writing from the Client of the alleged defect within two years (2 years) from date of invoice for Coil Springs, Leaf Springs and Shock Absorbers, and within twelve months (12 months) from date of invoice for all other parts. Any claim not made within this period shall conclusively be deemed waived by the Client. Repair or replacement is pre-conditioned on the examination of the goods which on instructions from Dobinsons Spring & SuspensionTM on, should be returned for further inspection to Dobinsons Spring & SuspensionTM or to an Approved Importer.

Coil Springs listed in this catalogue have a 2 year warranty against the following:1. Faulty Manufacture2. Breakage3. Sagging (being loss of free height of more than 10mm).

Leaf Springs listed in this catalogue have the 2 year warranty against the following:1. Faulty Manufacture2. Breakage3. Sagging (being the loss of free camber by more than 12mm).

Fridges listed in the catalogue have a 5 year warranty on the motor and a 1 year warranty on all other parts against:1. Faulty Manufacture

Winches listed in the catalogue have a 2 year warranty agains:1. Faulty Manufacture

All other accessories listed in the catalogue have a 1 year warranty against:1. Faulty Manufacture

Dobinsons Spring & SuspensionTM products are designed for normal use and are in no way, covered under warranty should the vehicle be used in any form of extreme sports, competition racing or produce lift of 50mm or more. It is the responsibility of the fi tter, to ensure that the customer or the owner of the vehicle is aware of the warranty conditions under which the products have been sold. It is highly recommended that the words ‘Suspension Components Fitted are for Normal Use Only. Warranty Void if used in extreme conditions” is written on their receipt to avoid any confusion.

Dobinsons Spring & SuspensionTM will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and Dobinsons Spring & SuspensionTM makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4) Goods incorrectly chosen by Client; (5) Goods modifi ed or altered by client; and (6) any merchandise, materials, parts or other components supplied by someone other than Dobinsons Spring & SuspensionTM.

Dobinsons Spring & SuspensionTM shall not be liable for any expenses incurred by Client in order to remedy any defect in its product. Dobinsons Spring & SuspensionTM shall not be liable for any consequential, special, indirect or contingent damage or expense arising Directly or Indirectly from any defect in its products or from use of any products.

Client agrees to indemnify and hold Dobinsons Spring & SuspensionTM harmless from and against any loss, injury or damage, to person or property, that extends beyond the warranties set forth above, whether the claims against Dobinsons Spring & SuspensionTM or the damages are incidental or consequential.

Terms and ConditionThe only terms of the Contract are those agreed to in writing by Dobinsons Spring & SuspensionTM, these Terms (to the extent they are not inconsistent with terms agreed to in writing by Dobinsons Spring & SuspensionTM) and those which are implied or imposed by law (including the Trade Practices Act 1974) to the extent that it is not lawful or possible to exclude them. All other terms, conditions and warranties are expressly excluded. If a confl ict arises between the terms of any order made by Client and these Terms, these Terms will prevail. An agreement to deliver the Goods in installments is taken to be separate Contract for each installment. The laws of Queensland govern these Terms and Conditions and any Contract that includes them and Dobinsons Spring & SuspensionTM and Client submit to the jurisdiction of the courts of the State. If a term is held to be unenforceable, the remaining terms will apply.

Dobinsons Spring & SuspensionTM will not be liable to the Client in the event that delivery of the goods is delayed irrespective of the cause of the delay.

Terms & Conditions of Sale

TERMS O

F SALE

SPRING & SUSPENSION contents - Polaris Innovations · SPRING & SUSPENSION ... Design...

Documents

Transcript of SPRING & SUSPENSION contents - Polaris Innovations · SPRING & SUSPENSION ... Design...