SPRAY NOZZLES - Delavan · 2017-12-20 · ED 45° – 90° Flat disc with 5/8" UNF thread for...

to the most frequently specified nozzles forgeneral industrial applications

SPRAY

A GLOBAL PRODUCT GUIDE

For a complete product range visit our website @ www.delavan.com for full details

NOZZLES

Delavan prod guide covers 4 4/29/03 12:33 PM Page 2

Contact our Customer Service Team or your local distributor for further detailsTel: +44 (0) 151 424 6821 or alternatively e-mail: [email protected]

USA Tel: Toll free: 1-800 Delavan or alternatively e-mail [email protected]

WELCOME TO DELAVAN

Delavan is proud to be part of the Goodrich Corporation. Since

the company was founded in 1935, the Delavan name has

always stood for quality, flexibility and reliability. Today Delavan

Spray Technologies is a world leader in the design and

manufacture of high quality nozzles and fluid handling systems.

Operating from dedicated manufacturing and design

facilities in the UK and USA, Delavan supplies more than

30,000 components to thousands of customers in virtually

every imaginable manufacturing and processing industry. With

distributors in more than 60 countries around the world,

Delavan products, expertise and quality are all available globally.

Specialist design teams can also provide bespoke design,

manufacture and installation of everything from a single nozzle to

a complete fluid handling system. From metal finishing to paper

production, from the chemical industry to food processing, from

brewing to the mining, steel, automotive, oil heating and water

industries….the name on the world’s finest nozzles and fluid

handling system is Delavan.

of newchallengesMeeting the

industriesand NEW markets.

Whichever nozzle you choose, you can be sure of its quality.

Delavan’s quality control procedures ensure that both incoming

materials and outgoing orders are routinely checked to ensure

they meet rigorous quality standards. We can also adapt our

manufacturing processes to meet the precise demands of

recognised standards in many other industries around the world.

This brochure has been designed as an overview and

features the majority of our most commonly used industrial

products. Please note that this is not an exhaustive list of our

products and further information can be found in our

Specifiers Guide on CD-rom or on the Delavan website.

Delavan now also offer a range of specialist product

brochures including Spray Drying, Steel Industry, Spray

Nozzles & Showers for the Pulp & Paper Industry, Variable

Coating Nozzle (VCN) and Safety Showers. These

publications are featured on the back cover of this brochure –

contact our Customer Service Team for further information.

Delavan SprayTechnologiesBamberg,SouthCarolina, USA

▲

Delavan SprayTechnologiesWidnes, UnitedKingdom

▲


3



NOZZLE TECHNOLOGY

This page gives a basic introduction to nozzle technology. To help you makethe best use of Delavan products and services we have produced a full 16page guide to spray nozzle technology. This is available on our web site or onCD-rom and is designed to take you through the fundamentals of spraytechnology step by step.

In addition there are variations on these sprays for specific applications.Please refer to the Application Guide section on our website or CD-rom.These are:-

a) Flat sprays

b) Hollow cone sprays

c) Solid cone sprays

d) Air atomising sprays

In addition there are variations on these sprays for specific applications. Refer to the Application Guide section.

Delavan produces a vast range of spray nozzles with many variations oneach basic type. Your choice of nozzle will depend on several key factors.These are:

1. Flow rate (capacity)

2. Operating pressure

3. Spray pattern

4. Spray angle

5. Liquid to be sprayed

6. Quality of atomisation

7. Material of manufacture

To help you with your choice of spray nozzle, each of the above key factors isdiscussed in detail on our website.

TYPES OF NOZZLE

INTRODUCTION

www.delavan.com

A SELECTION OF TYPICAL SPRAY PATTERNS

FLAT SPRAYAn elliptical orificeformed by theintersection of a ‘V’groove with ahemispherical cavity.

HOLLOW CONEA circular exit orificewhich is preceded by aswirl chamber with atangential inlet.

SOLID CONEA circular exit orificewhich is precededby a swirl chamberwith a multi-slottedin-line distributor andcentral line.

AIR ATOMISINGThese are produced by usingair as the atomising agentand sprays are generally ofthe external (siphon orpressure) and internal(pressure) mix design.

Nozzle Diagram Spray Diagram



Spray Diagram

Delavan Prod guide Inside2.vis 4/29/03 10:37 AM Page 1



NOZZLE RANGE & INDEX

Nozzle Spray Basic DescriptionType Angles

AC/WF 0° – 90° 1/8"-1" Male BSPT thread, 1/4" and 3/8" Female BSPP thread.CAC 0° – 90° 1/16" NPT, 1/4" to 3/4" BSPP Male thread. More compact than AC type.ACS 0° – 90° 1/8" and 1/4" Male BSPT thread. Supplied with optional strainer.LF 0° – 110° Flanged tip design for use with standard threaded bodies and caps.LA 0° – 90° Large flanged tip design for use with threaded/welded bodies and cap.LC 0° – 110° Robust flanged tip design for use with standard threaded bodies and caps.LE 80° Flanged tip design for use with standard threaded bodies and caps.LX 70° offset Flanged tip design for use with standard threaded bodies and caps.WJ 70° offset 1/4"-1" Male BSPT thread.LK 15° – 90° Flanged tip design for use with standard threaded bodies and caps, ceramic orifice insert.LD 0° – 90° Flanged tip design with dovetail connection. Uses special bodies for positive alignment.AD 0° – 90° Flanged tip design with dovetail connection. Uses special bodies for positive alignment.ED 45° – 90° Flat disc with 5/8" UNF thread for direct fitting into pipe walls.EF 45° – 90° Flat disc as ED, but for use with standard bodies and caps.D 90° – 140° Flanged tip design for use with standard threaded bodies and caps.

AN/F 90° – 140° 1/8"-1" Male BSPT thread.TJ/SJ 25° – 50° 1/4"-1/2" Male BSPT thread.

Blow-off 55° – 100° Flanged tip design for use with standard threaded bodies and caps.SL 80° – 115° Flanged tip design for use with standard threaded bodies and caps.DJ 80° – 115° 1/4"-1/2" Male BSPT thread.


AZ 0° – 50° 1/8"-1/4" Male BSPT thread.BZ 30° 1/4"-1/2" Male BSPT thread.343 25° and 32° 3/8" Male NPT thread.344 25° and 32° 3/8" Male NPT thread.DD 25° and 32° 3/4" and 1" Male NPT thread and welding bodies.Dovetail connection for positive alignment of orifice.AQ 25° – 95° 1/4" Male BSPT thread. Tungsten Carbide orifice insert.LQ 25° – 95° Flanged tip design with dovetail connection. Uses special bodies for positive alignment..DQ 25° and 32° 3/4" and 1" Male NPT thread and welding bodies. Dovetail connection for positive alignment of orifice. Tungsten Carbide orifice insert.DE 25° and 32° 3/4" and 1" Male NPT thread. Unique connection for positive alignment of orifice. Tungsten Carbide orifice insert.

HIG

HP

RE

SS

UR

ES

PE

CIA

LP

UR

PO

SE

FL

AT

SP

RA

Y

The following two pages give a brief overview of all the Delavan Industrial spray nozzles and accessories The products highlighted inblue are illustrated further in the brochure on the pages indicated.

Information on all our products can be found on our website at www.delavan.com , or alternatively you can request a copy of our CD-rom. Don’t forget WE ARE HERE TO HELP – If you need more detailed information or advice then Delavan personnel are alwaysavailable to answer your questions.


WM 40°,60°,80° 1/4" BSPT Male thread.WG 60°,80° Flanged tip design for use with standard bodies and caps.WA 60°,80° 9/16" UNEF thread for use with special Male and Female BSP threaded adaptors.

WDA 30°,45°,60°,70°,80°,90° 9/16" UNEF thread for use with special Male and Female BSP threaded adaptors.HB/HC 70° Flanged tip design for use with standard bodies and caps.

BJ 44° – 98° 1/8"-1" BSPT Male and BSPP Female threads.DC 20° – 110° Two piece nozzle design for use with standard bodies and caps.AG 65° – 75° 3/8"-3/4" BSPT Male thread.AH 100° – 115° 3/8"-3/4" BSPT Male thread.WS 75° 1/8"-3/4" NPT Male and Female threadsCBJ 44° – 98° 1/8"-1" BSPP Male threads. More compact than BJ type.PJ 90°,120°,150°,180°,210° 1/4"-3/4" BSPT Male threads.AE 70° – 90° 1/8"-1" BSPT Male and BSPP Female threads.AF 100° – 120° 1/8"-1" BSPT Male and BSPP Female threads.WR 45° – 155° 3/8" NPT Male and Female threads.

WRW 110° – 140° 1/4" and 3/4" NPT Male threads.RA 120° – 140° 1/4" and 3/4" NPT Male threads.BE 55° – 90° 11/4"-4" BSPT Female threads.

WRA- 50° – 100° 11/2" BSPT Male thread or Quick Coupler Adaptor connection.WRS

WRA-RD 100° – 135° 11/2" BSPT Male thread or Quick Coupler Adaptor connection.WRS-RD

HO

LLO

W C

ON

E

FLAT SPRAY NOZZLES

HOLLOW CONE NOZZLES

Page 6

Page 6

Page 6

Page 6

Page 6

Page 8

Page 8

Page 8

Page 8

Page 12

Page 12

Page 12

Page 12

Page 12

Page 14

Page 12

Page 6

Page 10Page 10Page 10Page 10Page 10

Page 14

Page 6


5

NOZZLE RANGE & INDEX




WDB 30°,45°,60°,70°,80°,90° 9/16" UNEF thread for use with special Male and Female BSP threaded adaptors.BL 45°,60°,90° 1/8" BSPT Male thread.BP 45°,60°,90° 1/8" BSPT Male thread.WL 45°,60°,90° Flanged tip design for use with standard bodies and caps.BF 30°,60°,90°,120° Flanged tip design for use with standard bodies and caps.BI 35° – 100° 1/8"-1" BSPT Male and BSPP Female threads.BN 85° – 130° 1/8"-1" BSPT Male and BSPP Female threads.CT 45° – 90° 1/8"-1/2" NPT Male and Female threads.CU 45° – 80° 1/4"-3/8" NPT Male threads.BK 20° – 105° 1/8"-1" BSPT Male and BSPP Female threads.

CJM 30° 1/8"-2" BSPT Male threads.CJF 30° 1/8"-1" BSPP Female and 11/4"-4" BSPT Female threads.CM 45° – 110° 11/4"-8" BSPT Female threads.BY 70° – 130° 11/4"-3" BSPT Female threads.CA 45° – 98° 1"-4" BSPT Female threads.CB 45° – 95° 1"-3" NB welded connection.BC 50°,65°,80°,90°,120° 3/8" BSPP Female thread.BX 50°,65°,80°,90°,120° 3/8" BSPP Female thread.BQ 35° – 100° 1/8"-1" BSPT Male and BSPP Female threads.BT 85° – 130° 1/8"-1" BSPT Male and BSPP Female threads.

CU/SQ 60° – 65° 1/4"-1/2" NPT Male threads.CBI 35° – 100° 1/8"-1" BSPP Male threads. More compact than BI type.CBN 85° – 130° 1/8"-1" BSPP Male threads. More compact than BN type.CBQ 35° – 100° 1/8"-1" BSPP Male threads. More compact than BQ type.CBT 85° – 130° 1/8"-1" BSPP Male threads. More compact than BT type.RBI 35° – 100° 1/8"-1" BSPT Male and BSPP Female threads. Right angle design.RBN 85° – 130° 1/8"-1" BSPT Male and BSPP Female threads. Right angle design.NBI 41° – 100° 1/8"-1" BSPT Male and BSPP Female threads. Right angle design.NBN 110° – 128° 1/8"-1" BSPT Male and BSPP Female threads. Right angle design.

QI/QN/ 42° – 120° Quick attach connection to 11/4" and 11/2"QQ/QT NB eyelets.

SO

LID

CO

NE

SOLID CONE NOZZLES

Page 16

Page 18

Page 14

Page 14

Page 18

Page 18

Page 14

Page 14

Page 14

Page 16

Page 16

Item Type Basic Description

NOZZLE BODIES 1/8"-3/8" BSPT Male and BSPP Female threads for use with flanged and dovetail type nozzles.NOZZLE CAPS 3/8" BSPP and 11/16"-16 UN threaded for use with the above bodies.SWIVELS 1/8"-1/4" NPT Female and 1/4" NPT Male inlets with outlet for above caps with flanged type nozzles.EYELETS BODIES 1/2"-11/2" N.B. Eyelets with various outlet connections for nozzles.TIP FILTERS Flanged filters with various mesh sizes for use with the above.T-LINE STRAINERS 1/2"-11/2" T Line Strainers with various mesh sizes. Polypropylene & Nylon.PRV’S Pressure relieve vlves upto 700 PSIG (48 Bar). Brass & NylonBALL VALVE 1/2"-3" in Polyglass.HIGH PRESSURE SPRAY GUNS Various high pressure handguns, lances and accessories.ADJUSTABLE JOINTS 1/8"-1" Male/Female adjustable joint with various angles of inclination.HNS - HEADER NOZZLE SOCKETS 1/8"-1" BSPP Female threaded sockets for use with threaded nozzles.ADAPTORS 1/8"-1" BSPT Male and BSPP Female x 90˚ adaptor for use with threaded nozzles.PIPE SUPPORT CLIPS & CLAMPS Clips 11/4" and 11/2". Clamps 1/2" - 11/2".

AC

CE

SS

OR

IES

ACCESSORIES

SP

EC

IAL

PU

RP

OS

E


AJ150 0° 1/4" BSPT or 1/4" NPT Male threadBB 0° 3/8"-3/4" BSPT Male thread.

1505 0° Flat disc for use with standard bodies and caps.RO 0° 1/4"-1" BSPT Male thread.

CON 0° Flanged tip design for use with standard bodies and caps.BYPASS 75° – 85° 3/4"-1/2" NPT Male threads. Used with special adaptors.KIT ONE 115° – 130° 3/4"-1" hosetail connections with 1/2 or 1 metre risers.

FN 180° 1/2" BSPP Female thread.

SPECIAL PURPOSE

Page 16

Page 22

Page 22

Page 23

Page 23

Page 24

Page 24

Page 24

Page 25

Page 26

Page 24

Page 22

Page 24

Page 25

Page 25

Page 26

All nozzles depicted in this brochure are subject to a manufacturing tolerance of +/- 5% of rated capacity and within +/- 5° of rated spray angle when tested with water.


FLAT SPRAY NOZZLES

TYPICAL APPLICATIONSAsphalt or tar laying, bottle washing, coal andgravel washing, degreasing, dishwashing, foamcontrol, industrial washers, metal cleaning-rinsingand washing, spray coating, vehicle washing, watermisting and water fountains.

TYPE AC SPRAY PATTERN

AC/WF Type NozzleOne-piece male pipe thread design availablein flow sizes from 2 – 600 with spray anglesof 0, 5, 15, 25, 40, 50, 65, 80, 90°. Type WF isNPT thread; AC is BSPT thread.See chart for thread sizes (1/8" ACM6 &larger also available in PVC & PVDF).

6

LF Type NozzleFlanged tip design for use with standardthreaded bodies and caps, available in flowsizes from 2 – 50 with spray angles of 0, 15,25, 40, 50, 65, 80 90, 100 and 110°. Body thread sizes 1/8",1/2" & 3/4". See Accessories section.

AD TypeLarge dovetailed tip design for use withspecial threaded/welded bodies and caps,providing positive alignment. Available in flowsizes from 10 – 200 with spray angles of 0,15, 25, 40, 50, 65, 80, 90°. Orifice is offset15° to axis of dovetail plus welded body inStainless Steel. See Accessories section.

LE TypeFlanged tip design for use with standardthreaded bodies and caps, available inflow sizes from 2 – 15 with spray angle of80°. Produces an even flat fan pattern withhard edges. Body thread sizes 1/8",1/4" &3/8". See Accessories section.

CAC Type NozzleCompact, one-piece male pipe threaddesign available in flow sizes from 2 – 300with spray angles of 0, 5, 15, 25, 40, 50, 65,80, 90°. See chart for thread sizes (1/16" sizeis NPT only).

LA TypeLarge flanged tip design for use withthreaded/welded bodies and caps, availablein flow sizes from 10 – 200 with spray anglesof 0, 15, 25, 40, 50, 65, 80, 90°. Body threadsizes 1/2" & 3/8". See Accessories section.

LD TypeDovetailed tip design for use with specialthreaded/welded bodies and caps, providingpositive alignment. Available in flow sizes from2 - 50 with spray angles of 0, 15, 25, 40, 50, 65,80, 90°. Orifice is offset 15° to axis of dovetailplus welded body in Stainless Steel. SeeAccessories section.



Producing a uniform flat fan shaped pattern with tapering edges

Unless otherwise stated, all nozzles and tips areavailable in Brass and Stainless Steel as standard.


7

FLAT SPRAY CAPACITY CHARTNOZZLE THREAD SIZES FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG

NUMBER AC CAC 1 2 3 4 5 7 10 15 30 40 60 80 100 145

2 1/8, 1/4 1/16, 1/8, 1/4 0.46 0.65 0.80 0.89 0.99 1.24 1.43 0.12 0.17 0.20 0.24 0.26 0.33 0.40

3 1/8, 1/4 1/16, 1/8, 1/4 0.68 0.97 1.18 1.36 1.53 1.81 2.23 0.18 0.26 0.30 0.36 0.40 0.48 0.58

4 1/8, 1/4 1/16, 1/8, 1/4 0.90 1.27 1.56 1.83 2.03 2.38 2.86 0.24 0.34 0.40 0.48 0.54 0.63 0.76

5 1/8, 1/4 1/16, 1/8, 1/4 1.15 1.62 1.99 2.28 2.55 3.02 3.62 0.30 0.43 0.50 0.60 0.67 0.80 0.96

6 1/8, 1/4 1/16, 1/8, 1/4 1.37 1.94 2.37 2.72 3.07 3.61 4.46 0.36 0.51 0.60 0.72 0.81 0.95 1.14

7 1/8, 1/4 1/16, 1/8, 1/4 1.59 2.25 2.75 3.21 3.54 4.21 5.36 0.42 0.59 0.70 0.85 0.94 1.11 1.34

8 1/8, 1/4 1/16, 1/8, 1/4 1.83 2.59 3.17 3.66 3.98 5.03 5.80 0.48 0.68 0.80 0.97 1.05 1.33 1.60

10 1/8, 1/4 1/16, 1/8, 1/4 2.27 3.21 3.93 4.46 5.19 5.95 7.14 0.60 0.85 1.00 1.18 1.37 1.57 1.89

15 1/8, 1/4 1/16, 1/8, 1/4 3.44 4.21 6.16 6.70 7.78 9.15 10.71 0.91 1.11 1.50 1.77 2.06 2.42 2.92

20 1/8, 1/4 1/16, 1/8, 1/4 4.46 6.25 8.05 9.37 9.94 12.35 14.73 1.18 1.65 2.00 2.48 2.63 3.26 3.93

25 1/4 1/4 5.80 8.03 9.94 11.38 12.75 15.09 18.08 1.53 2.12 2.50 3.01 3.37 3.99 4.81

30 1/4, 3/8 1/4, 1/8 6.70 9.82 11.84 13.84 15.13 17.84 21.43 1.77 2.59 3.00 3.66 4.00 4.71 5.67

40 1/4, 3/8 1/4, 1/8 9.37 12.05 15.62 18.30 20.57 24.25 28.57 2.48 3.18 4.00 4.83 5.43 6.41 7.72

50 1/4, 3/8 1/4, 1/8 11.61 16.07 19.89 22.77 25.50 30.19 36.16 3.07 4.25 5.00 6.02 6.74 7.98 9.61

60 1/4, 3/8 1/4, 1/8 13.84 19.20 23.67 27.23 30.69 36.14 43.30 3.66 5.07 6.00 7.19 8.11 9.55 11.51

70 1/4, 3/8 1/4, 1/8 16.07 22.77 27.46 32.14 35.88 42.54 50.45 4.25 6.02 7.00 8.49 9.48 11.24 13.54

80 3/8, 1/2 3/8, 1/2 18.75 25.45 31.72 36.61 41.06 48.03 57.14 4.95 6.72 8.00 9.67 10.85 12.69 15.29

100 3/8, 1/2, 3/4 3/8, 1/2, 3/4 22.77 31.70 39.30 45.53 51.00 60.38 72.32 6.02 8.37 10.00 12.03 13.47 15.95 19.22

125 3/8, 1/2, 3/4 3/8, 1/2, 3/4 28.46 39.62 49.12 56.91 63.75 75.48 90.40 7.52 7.83 12.50 15.03 16.84 19.94 24.02

150 1/2, 3/4 1/2, 3/4 34.37 48.21 59.19 68.31 76.50 90.10 108.00 9.08 12.74 15.00 18.04 20.21 23.81 28.69

200 1/2, 3/4 1/2, 3/4 45.53 64.28 79.07 91.10 102.00 120.30 143.80 12.03 16.98 20.00 24.06 26.95 31.78 38.29

250 3/4 3/4 58.84 80.36 98.50 113.40 127.50 150.00 179.90 15.54 21.23 25.00 29.96 33.68 39.63 47.75

300 3/4, 1 3/4 68.30 96.87 118.40 136.60 152.60 180.70 215.60 18.04 25.59 30.00 36.09 40.31 47.74 57.52

400 3/4, 1 - 90.60 128.60 157.70 182.10 204.00 241.10 287.90 23.94 33.97 40.00 48.12 53.89 63.69 76.73

500 1 - 114.00 161.30 197.50 228.00 254.90 301.60 360.50 30.12 42.61 50.00 60.23 67.34 79.68 96.00

600 1 - 136.80 193.50 237.00 273.70 306.00 362.10 432.80 36.14 51.12 60.00 72.31 80.84 95.66 115.25




FLOODING NOZZLES

TYPICAL APPLICATIONSAsphalt or tar laying, bottle washing, coal andgravel washing, degreasing, dishwashing, foamcontrol, industrial washers, metal cleaning-rinsingand washing, spray coating, vehicle washing,water misting and water fountains.

TYPE AN SPRAY PATTERN

D TypeFlanged tip design for use with standardthreaded bodies and caps, available in flowsizes from 0.5 – 30 with a nominal sprayangle of 90° - 140° depending on flow sizeand pressure. Spray exits at a 75° angle fromthe inlet orifice. Body thread sizes 1/8",1/4" & 3/8".

8

AN/F Type NozzleOne-piece male pipe thread design availablein flow sizes from 0.5 – 300 with a nominalspray angle of 90° - 140° depending on flowsize and pressure. Spray exits at a 75° anglefrom the inlet orifice. Type F is NPT thread;Type AN is BSPT thread.



TJ/SJ Type NozzleOne-piece male pipe thread design availablein flow sizes from 10 – 200 with spray anglesof 25, 35, 40 and 50°. SJ is NPT thread andtype TJ is BSPT thread.

Deflector type design producing wide flat spray pattern at low pressures

PRESSURE WASHER NOZZLES

AZ/AA Type NozzleOne-piece male pipe thread design availablein flow sizes from 4 – 50 and spray angles of0, 15, 25, 40, and 50°. Type AA is NPTthread; type AZ is BSPT thread.

Producing a uniform flat fan shaped pattern with high impact


HIGH IMPACT DEFLECTOR NOZZLES


9



FLOODING NOZZLES AN/F & D CAPACITY CHARTNOZZLE THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG NUMBER SIZE 0.5 0.7 1 1.5 2 3 4 7 10 15 20 30 40 60

0.5 1/8 - 0.19 0.23 0.28 0.32 0.39 0.46 - 0.05 0.06 0.07 0.08 0.10 0.120.75 1/8 - 0.29 0.34 0.42 0.48 0.59 0.68 - 0.08 0.09 0.11 0.13 0.15 0.18

1 1/8 - 0.38 0.46 0.56 0.65 0.79 0.91 - 0.10 0.12 0.14 0.17 0.20 0.251.5 1/8 0.48 0.57 0.68 0.84 0.97 1.18 1.37 0.12 0.15 0.18 0.21 0.26 0.30 0.372 1/8 0.65 0.76 0.91 1.12 1.29 1.57 1.82 0.17 0.20 0.24 0.28 0.35 0.40 0.49

2.5 1/8, 1/4 0.81 0.95 1.14 1.40 1.61 1.96 2.28 0.20 0.25 0.30 0.35 0.43 0.50 0.613 1/8, 1/4 0.97 1.14 1.38 1.66 1.92 2.37 2.72 0.25 0.30 0.37 0.42 0.52 0.60 0.745 1/8, 1/4 1.61 1.92 2.28 2.79 3.21 3.94 4.42 0.42 0.50 0.61 0.71 0.87 1.00 1.23

7.5 1/8, 1/4 2.40 2.84 3.39 4.36 4.91 5.92 6.70 0.63 0.75 0.92 1.10 1.30 1.50 1.8410 1/8, 1/4 3.23 3.81 4.46 5.49 6.29 7.91 9.38 0.84 1.00 1.20 1.40 1.70 2.00 2.4515 1/8, 1/4 4.99 5.67 6.70 8.24 9.64 11.80 13.80 1.30 1.50 1.80 2.10 2.60 3.00 3.6818 1/8, 1/4 5.70 6.86 8.17 9.94 11.60 14.20 16.40 1.50 1.80 2.20 2.50 3.10 3.60 4.4120 1/8, 1/4, 3/8, 1/2 6.56 7.59 8.93 11.00 13.00 15.70 18.30 1.70 2.00 2.40 2.80 3.50 4.00 4.9025 1/4, 3/8, 1/2 8.09 9.61 11.60 13.80 16.10 19.73 22.80 2.10 2.50 3.10 3.50 4.30 5.00 6.1330 1/4, 3/8, 1/2 9.70 11.40 13.80 16.60 19.00 23.70 27.20 2.50 3.00 3.70 4.20 5.10 6.00 7.3535 1/4, 3/8, 1/2 16.60 13.30 15.60 19.40 22.70 27.50 32.10 3.00 3.50 4.20 4.90 6.10 7.00 8.5840 3/8, 1/2 12.70 15.20 18.30 22.40 25.70 31.50 36.40 3.30 4.00 4.90 5.70 6.90 8.00 9.8045 3/8, 1/2 14.50 17.10 20.40 25.00 28.90 35.40 40.90 3.83 4.51 5.39 6.60 7.63 9.35 10.8050 3/8, 1/2, 3/4 16.20 19.00 22.70 28.00 32.00 39.40 46.40 4.20 5.00 6.10 7.10 8.60 10.00 12.2560 3/8, 1/2, 3/4 19.20 22.90 27.20 33.60 38.70 47.30 54.60 5.00 6.00 7.30 8.50 10.40 12.00 14.7170 3/8, 1/2, 3/4 22.60 26.70 31.90 39.10 45.10 55.30 63.80 5.97 7.05 8.42 10.32 11.91 14.60 16.8475 3/8, 1/2, 3/4 24.20 28.60 34.20 41.80 48.30 59.20 68.40 6.30 7.50 9.20 10.60 13.00 15.00 18.3880 3/8, 1/2, 3/4 25.90 30.50 36.40 44.60 51.30 63.10 72.90 6.70 8.00 9.80 11.30 13.80 16.00 19.6190 1/2, 3/4 29.00 34.30 41.00 50.20 58.00 71.00 82.00 7.66 9.05 10.82 13.25 15.31 18.74 21.65100 1/2, 3/4 32.30 38.10 45.40 55.60 64.30 78.90 91.10 8.40 10.00 12.20 14.10 17.30 20.00 24.51108 1/2, 3/4 34.80 41.20 49.20 60.30 69.60 85.30 98.50 9.19 10.88 12.99 15.92 18.37 22.52 26.00120 1/2, 3/4 38.50 45.70 54.60 67.00 77.30 94.70 109.00 10.00 12.00 14.70 17.00 20.80 24.00 29.41150 3/4, 1 48.50 57.20 68.40 83.60 96.70 118.00 137.00 12.60 15.00 18.40 21.20 26.00 30.00 36.76180 3/4, 1 58.10 68.70 82.10 101.00 116.00 142.00 164.00 15.34 18.14 21.67 26.66 30.62 37.49 43.29200 3/4, 1 64.70 76.20 90.70 111.00 129.00 158.00 182.00 16.80 20.00 24.40 28.20 34.60 40.00 49.02210 3/4, 1 67.30 80.10 95.60 117.00 135.00 166.00 191.00 17.50 21.00 25.70 29.60 36.30 42.00 51.47250 1 79.40 94.00 112.00 138.00 159.00 195.00 225.00 20.96 24.82 29.57 36.43 41.97 51.48 59.40300 1 95.30 113.00 135.00 165.00 191.00 234.00 270.00 25.16 29.83 35.64 43.56 50.42 61.77 71.28

TJ CAPACITY CHARTNOZZLE THREAD SPRAY FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIGNUMBER SIZE ANGLES 0.7 2 3 4 5 6 7 10 20 40 60 80 100

TJ10 1/4 25, 35,40, 50 1.9 3.2 3.9 4.6 5.1 5.6 6.0 0.5 0.7 1.0 1.2 1.4 1.61/8 35 1.9 3.2 3.9 4.6 5.1 5.6 6.0 0.5 0.7 1.0 1.2 1.4 1.6

TJ20 1/4 25, 35 3.8 6.4 7.9 9.1 10.2 11.2 12.1 1.0 1.4 2.0 2.4 2.8 3.2

TJ25 3/8 50 4.7 8.1 9.9 11.4 12.7 14.0 15.1 1.2 1.7 2.5 3.1 3.5 3.91/4 35, 50 4.7 8.1 9.9 11.4 12.7 14.0 15.1 1.2 1.7 2.5 3.1 3.5 3.9

TJ30 3/8 35, 50 5.7 9.7 11.8 13.7 15.3 16.8 18.1 1.5 2.1 3.0 3.7 4.2 4.7

TJ40 3/8 35, 40, 50 7.6 12.9 15.8 18.2 20.4 22.3 24.1 2.0 2.8 4.0 4.8 5.6 6.41/4 25, 35, 50 7.6 12.9 15.8 18.2 20.4 22.3 24.1 2.0 2.8 4.0 4.8 5.6 6.4

TJ50 3/8 40 9.5 16.1 19.7 22.8 25.5 27.9 30.2 2.5 3.5 5.0 6.1 7.1 7.91/2 35 9.5 16.1 19.7 22.8 25.5 27.9 30.2 2.5 3.5 5.0 6.1 7.1 7.9

TJ60 3/8 35, 40, 50 11.4 19.3 23.9 27.3 30.6 33.5 36.2 3.0 4.2 6.0 7.4 8.5 9.4TJ80 1/2 35, 50 15.2 25.8 31.6 36.5 40.8 44.7 48.2 4.0 5.7 8.0 9.8 11.3 12.7TJ90 3/8 40 17.1 29.0 35.9 41.0 45.9 50.3 54.3 4.5 6.4 9.0 10.1 12.7 14.2

TJ100 3/8 40, 50 19.1 32.2 39.5 45.6 51.0 55.8 60.3 5.0 7.0 10.0 12.2 14.3 15.81/2 35, 50 19.1 32.2 39.5 45.6 51.0 55.8 60.3 5.0 7.0 10.0 12.2 14.3 15.8

TJ200 3/8 50 38.2 64.5 79.0 91.2 102.0 112.0 122.0 10.1 14.1 20.2 24.5 28.3 32.01/2 35, 50 38.2 64.5 79.0 91.2 102.0 112.0 122.0 10.1 14.1 20.2 24.5 28.3 32.0

HIGH PRESSURE AZ/AA CAPACITY CHARTNOZZLE THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG NUMBER SIZE 15 20 25 35 40 50 60 70 200 300 400 500 600 700 800 1000

4 1/8, 1/4 3.50 4.10 4.60 5.40 5.80 6.50 7.10 7.60 0.92 1.08 1.22 1.43 1.53 1.72 1.88 2.014.5 1/8, 1/4 4.00 4.60 5.10 6.10 6.50 7.30 8.00 8.60 1.06 1.22 1.35 1.61 1.72 1.93 2.11 2.275 1/8, 1/4 4.40 5.10 5.70 6.70 7.20 8.10 8.80 9.50 1.16 1.35 1.51 1.77 1.90 2.14 2.32 2.51

5.5 1/8, 1/4 4.90 5.60 6.30 7.40 7.90 8.90 9.70 10.50 1.29 1.48 1.66 1.95 2.09 2.35 2.56 2.776 1/8, 1/4 5.30 6.10 6.80 8.10 8.70 9.70 10.60 11.40 1.40 1.61 1.80 2.14 2.30 2.56 2.80 3.01

6.5 1/8, 1/4 5.70 6.60 7.40 8.80 9.40 10.50 11.50 12.40 1.51 1.74 1.95 2.32 2.48 2.77 3.04 3.287 1/8, 1/4 6.20 7.10 8.00 9.40 10.10 11.30 12.40 13.40 1.64 1.88 2.11 2.48 2.67 2.99 3.28 3.54

7.5 1/8, 1/4 6.60 7.60 8.60 10.10 10.80 12.10 13.20 14.30 1.74 2.01 2.27 2.67 2.85 3.20 3.49 3.788 1/8, 1/4 7.10 8.20 9.10 10.80 11.50 12.90 14.10 15.30 1.88 2.17 2.40 2.85 3.04 3.41 3.72 4.04

8.5 1/8, 1/4 7.50 8.70 9.70 11.50 12.30 13.70 15.00 16.20 1.98 2.30 2.56 3.04 3.25 3.62 3.96 4.289 1/8, 1/4 8.00 9.20 10.30 12.10 13.00 14.50 16.00 17.20 2.11 2.43 2.72 3.20 3.43 3.83 4.23 4.5410 1/8, 1/4 8.80 10.20 11.40 13.50 14.40 16.10 17.70 19.10 2.32 2.69 3.01 3.57 3.80 4.25 4.68 5.0515 1/8, 1/4 13.20 15.30 17.10 20.20 21.60 24.20 26.50 28.60 3.49 4.04 4.52 5.34 5.71 6.39 7.00 7.5620 1/8, 1/4 17.70 20.40 22.80 27.00 28.80 32.20 35.30 38.10 4.68 5.39 6.02 7.13 7.61 8.51 9.33 10.0730 1/8, 1/4 24.50 30.60 34.20 40.50 43.30 48.40 53.00 57.20 6.47 8.08 9.03 10.70 11.44 12.79 14.00 15.1140 1/4 35.30 40.80 45.60 54.00 57.70 64.50 70.60 76.30 9.33 10.78 12.05 14.27 15.24 17.04 18.65 20.1750 1/4 44.10 51.00 57.00 67.40 72.00 80.60 88.30 95.40 11.65 13.47 15.06 17.81 19.02 21.29 23.33 25.20


SMALL HOLLOW CONE NOZZLES

HB/HC Type Flanged tip design for use with standard

threaded bodies and caps, available in flow sizes from 1 – 26 with nominal spray angle of 70°.

10

WDA Type NozzleBasic nozzle thread 9/16" – 24 UNEF, withoptional adaptors providing 1/8" and 1/4"pipe threads. Flow sizes from 0.5 to 20 withspray angles of 30°, 45°, 60°, 70°, 80° and90°. Nozzle consists of five parts, body,orifice disc, distributor, retainer and strainer(used up to WDA 14).



WA Type Basic nozzle thread is 9/16" – 24 UNEF, withoptional adaptors providing 1/8" and 1/4" pipethreads. Standard spray angles are 60° and80°. See chart for available flow sizes.

WM Type NozzleMale threaded nozzle only available in 1/2"BSPT as standard. See chart for availableflow sizes. Standard spray angles of 60°and 80°.

WG TypeFlanged tip design for use with standardthreaded bodies and caps. See chart foravailable flow sizes. Standard spray angles of 60° and 80°.

TYPICAL APPLICATIONSAerating water, brine sprays, chemical processing,coil defrosting, dust control, evaporative condensers,evaporative coolers, industrial washers, roof cooling,spray ponds, spray coating, gas scrubbing andwashing, humidification, gas cooling, cooling towers,coal washing, degreasing, gravel washing,dishwashing, foam control, industrial washing andwater fountains.

TYPICAL SPRAY PATTERN

Producing finest atomisation with no central distribution



11



SMALL HOLLOW CONE - HB/HC CAPACITY CHARTNOZZLE FLOW RATE IN LITRES/HOUR AT BAR G FLOW RATE IN GPH AT PSIG NUMBER 2 3 4 5 6 7 40 75 100 125 150 300 500

1 3.23 3.95 4.56 5.10 5.58 6.03 1.00 1.40 1.60 1.80 2.00 2.80 3.601.25 4.03 4.93 5.70 6.37 6.98 7.54 1.30 1.70 2.10 2.30 2.50 3.60 4.601.5 4.84 5.92 6.84 7.64 8.37 9.04 1.50 2.10 2.40 2.70 2.90 4.10 5.302 6.45 7.89 9.12 10.20 11.20 12.10 2.00 2.70 3.20 3.50 3.90 5.50 7.10

2.5 8.05 9.57 11.40 12.70 14.00 15.10 2.50 3.40 4.00 4.40 4.90 6.90 8.903 9.65 11.80 13.70 15.30 16.70 18.00 3.00 4.10 4.70 5.30 5.90 8.30 10.704 12.90 15.80 18.20 20.40 22.30 24.10 4.00 5.40 6.40 7.00 7.80 11.00 14.205 16.10 19.70 22.80 25.50 27.90 30.10 5.00 6.80 7.90 8.90 9.80 13.80 17.806 19.30 23.70 27.30 30.60 33.50 36.20 6.00 8.20 9.50 10.60 11.70 16.60 21.408 25.80 31.60 36.50 40.80 44.70 48.30 8.00 11.00 12.60 14.20 15.60 22.10 28.5010 32.20 39.50 45.60 51.00 55.80 60.30 10.00 13.70 15.80 17.70 19.50 27.60 35.6012 38.60 47.40 54.70 61.10 67.00 72.40 12.00 16.40 19.00 21.20 23.40 33.10 42.7014 45.10 55.30 63.80 71.30 78.10 84.40 14.00 19.20 22.10 24.80 27.30 38.60 49.8018 58.00 71.00 82.00 91.70 100.00 108.00 18.00 24.60 28.40 31.90 35.10 49.70 64.1022 71.00 86.80 100.00 112.00 123.00 133.00 22.00 30.10 34.90 39.00 42.90 60.70 78.3026 84.00 103.00 119.00 132.00 145.00 157.00 26.00 35.50 41.30 46.00 50.70 71.70 92.50

SMALL HOLLOW CONE - WA/WM/WG CAPACITY CHARTNOZZLE NUMBER FLOW RATE IN LITRES/HOUR AT BAR G FLOW RATE IN GPH AT PSIG 60° 80° 2 3 4 6 7 8 30 40 60 90 100 115056 058 - - 1.47 2.04 2.29 2.46 - - 0.40 0.50 0.60 0.70076 078 - 2.22 2.59 3.12 3.20 3.48 - 0.60 0.70 0.80 0.90 0.90106 1058 - 3.08 3.53 4.36 4.57 5.04 - 0.80 0.90 1.10 1.20 1.30126 128 - 3.74 4.20 5.21 5.49 5.80 - 1.00 1.10 1.40 1.50 1.60156 158 - 4.97 5.36 6.39 6.86 7.23 - 1.30 1.40 1.70 1.80 1.90206 208 5.36 6.39 7.37 8.76 9.15 9.37 1.40 1.70 2.00 2.30 2.40 2.50256 258 6.47 7.91 8.93 10.70 11.40 12.10 1.70 2.10 2.40 2.80 3.00 3.20306 308 8.04 9.47 10.60 12.80 13.70 14.40 2.10 2.50 2.80 3.40 3.60 3.80356 358 9.15 10.90 12.30 14.90 16.00 17.00 2.40 2.90 3.30 3.90 4.20 4.50406 408 10.00 12.30 14.10 17.00 18.30 19.40 2.60 3.30 3.70 4.50 4.80 5.10456 458 11.50 13.70 15.60 18.90 20.60 21.90 3.00 3.60 4.10 5.00 5.40 5.80506 508 12.70 15.20 17.40 21.10 22.90 24.50 3.40 4.00 4.60 5.60 6.10 6.50556 558 13.80 16.80 19.20 23.20 25.20 26.90 3.70 4.40 5.00 6.10 6.70 7.10606 608 15.10 18.00 21.00 25.60 27.40 29.20 4.00 4.80 5.60 6.80 7.20 7.70706 708 17.90 21.30 24.60 29.80 32.00 34.40 4.80 5.60 6.50 7.90 8.50 9.10806 808 20.10 26.00 27.70 34.30 36.60 39.70 5.30 6.90 7.30 9.10 9.70 10.501006 1008 24.60 30.10 34.60 42.60 45.70 49.10 6.50 8.00 9.10 11.30 12.10 13.001056 1058 25.40 31.20 36.40 45.00 48.00 51.30 6.70 8.20 10.04 11.90 12.70 13.601156 1158 29.50 35.00 41.10 49.20 52.60 55.80 7.80 9.30 10.90 13.00 13.90 14.701406 1408 33.50 41.20 47.50 59.70 64.00 67.90 8.90 10.90 12.60 15.80 16.90 17.901706 1708 39.70 49.20 56.20 69.80 77.80 85.30 10.50 13.00 14.90 18.40 20.60 22.502006 2008 49.10 59.20 69.20 85.20 91.50 97.30 13.00 15.70 18.30 22.50 24.20 25.70

SMALL HOLLOW CONE - WDA CAPACITY CHARTNOZZLE FLOW RATE IN LITRES/HOUR AT BAR G FLOW RATE IN GPH AT PSIG NUMBER 3 5 7 10 15 20 35 40 75 100 125 150 300 500

0.5 - 1.45 1.72 2.05 2.51 2.87 3.82 - 0.39 0.45 0.50 0.55 0.77 1.000.75 - 2.16 2.56 3.05 3.74 4.32 5.72 - 0.58 0.67 0.75 0.82 1.16 1.50

1 - 2.87 3.40 4.10 5.02 5.77 7.63 - 0.77 0.89 1.00 1.10 1.55 2.001.5 - 4.32 5.11 6.15 7.53 8.64 11.40 - 1.16 1.34 1.50 1.65 2.32 3.002 - 5.77 6.83 8.19 10.00 11.60 15.30 - 1.55 1.79 2.00 2.20 3.10 4.00

2.5 - 7.19 8.55 10.20 12.50 14.50 19.10 - 1.93 2.24 2.50 2.74 3.88 5.003 - 8.64 10.20 12.30 15.10 17.30 22.90 - 2.32 2.68 3.00 3.30 4.65 6.004 8.69 11.50 13.70 16.40 20.10 23.10 30.50 2.20 3.10 3.60 4.00 4.40 6.20 8.005 11.10 14.50 17.20 20.50 25.10 28.70 38.20 2.80 3.90 4.50 5.00 5.50 7.70 10.006 14.20 17.50 20.60 24.60 30.10 34.60 45.80 3.60 4.70 5.40 6.00 6.60 9.30 12.008 17.80 23.10 27.50 33.10 40.60 46.20 61.10 4.50 6.20 7.20 8.00 8.90 12.40 16.0010 22.10 28.70 34.00 41.00 50.20 57.70 76.30 5.60 7.70 8.90 10.00 11.00 15.50 20.0012 26.90 34.60 40.80 49.20 60.20 69.30 91.60 6.80 9.30 10.70 12.00 13.20 18.60 24.0014 31.20 40.20 47.70 57.00 69.80 80.80 107.00 7.90 10.80 12.50 14.00 15.30 21.70 28.0016 35.60 46.20 54.60 65.20 79.80 92.40 122.00 9.00 12.40 14.30 16.00 17.50 24.80 32.0018 39.90 51.80 61.40 73.40 89.90 104.00 137.00 10.10 13.90 16.10 18.00 19.70 27.90 36.0020 44.60 57.80 68.30 81.60 99.90 115.00 153.00 11.30 15.50 17.90 20.00 21.90 31.00 40.00


HOLLOW CONE NOZZLES

AE Type NozzleTwo piece right angle design (body and cap)with no internal vanes. Available in flow sizesfrom 2 – 350 with a nominal spray angle of 70° -90° depending on flow size and pressure.

12

AF Type NozzleTwo piece right angle design (body and cap)with no internal vanes. Available in flow sizesfrom 2 – 250 with a nominal spray angle of100° - 120° depending on flow size andpressure.



WRW Type NozzleWRW 2 – 240 available. Two piece design(body and cap) with no internal vanes. Rightangle configuration. Available spray angles of110, 115 and 140° depending upon flow sizeand pressure. WRW 2 – 20 available in 1/2"NPT male thread only and WRW 20 – 240available in 1/2" NPT male thread only.Available in Nylon only.

RA *Special design Type NozzleTwo piece right angle design (body and cap)with no internal vanes. Available in flow sizesfrom 2 – 280 with a nominal spray angle of 120°- 140° depending on flow size and pressure.Patented dual swirl chamber produces"Raindrop" type spray. Available in Nylon only.

WS Type NozzleThree part construction, body, core andadaptor. Available in flow sizes from 2 – 100.Nominal spray angle 75°. Available in NPTmale or female thread only.

WR Type NozzleTwo piece right angle design (body and cap)with no internal vanes. 3/8" NPT male andfemale threads only. Available inPolypropylene only.

TYPICAL APPLICATIONSAerating water, brine sprays, chemical processing, coildefrosting, dust control, evaporative condensers, evaporativecoolers, industrial washers, roof cooling, spray ponds, spraycoating, gas scrubbing and washing, humidification, gascooling, cooling towers, coal washing, degreasing, gravelwashing, dishwashing, foam control, industrial washing andwater fountains.


Producing fine atomisation with no central distribution*



13



HOLLOW CONE - AE/AF/WRW/RA/WS CAPACITY CHARTNOZZLE AE AF WRW RA WS FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG NUMBER BSPT NPT 1 2 3 4 5 6 7 15 30 40 60 70 90 100

2 1/8, 1/4 1/8, 1/4 1/4 1/4 1/8 0.46 0.64 0.79 0.91 1.00 1.10 1.20 0.12 0.17 0.21 0.24 0.26 0.29 0.324 1/8, 1/4 1/8, 1/4 1/4 1/4 1/8, 1/4 0.92 1.30 1.60 1.80 2.00 2.20 2.40 0.24 0.34 0.42 0.48 0.53 0.85 0.635 1/4 1/4 1.10 1.60 2.00 2.30 2.50 2.80 3.00 0.29 0.42 0.53 0.61 0.66 0.74 0.796 1/8, 1/4 1/8, 1/4 1/4 1/4 1/8, 1/4, 3/8 1.30 1.90 2.40 2.70 3.10 3.40 3.60 0.34 0.50 0.63 0.71 0.82 0.90 0.958 1/4 1.88 2.60 3.20 3.60 4.10 4.50 4.80 0.50 0.69 0.84 0.95 1.08 1.19 1.2710 1/8, 1/4, 3/8 1/8, 1/4 1/4 1/4 1/4, 3/8 2.30 3.20 3.90 4.60 5.10 5.60 6.00 0.61 0.85 1.03 1.22 1.35 1.48 1.5915 1/8, 1/4, 3/8 1/8, 1/4, 3/8 1/4 3/8, 1/2 3.40 4.80 5.90 6.80 7.60 8.40 9.00 0.90 1.27 1.56 1.80 2.01 2.22 2.3820 1/8, 1/4, 3/8 3/8 1/4 , 3/4 3/4 3/8, 1/2 4.50 6.40 7.96 9.10 10.20 11.20 12.10 1.19 1.69 2.09 2.40 2.69 2.96 3.2025 1/4, 3/8 3/8 5.70 8.10 9.90 11.40 12.70 14.00 15.10 1.51 2.14 2.62 3.01 3.36 3.70 3.9930 1/4, 3/8 3/8 3/4 3/4 1/2 6.90 9.70 11.80 13.70 15.30 16.80 18.10 1.82 2.56 3.12 3.62 4.04 4.44 4.7840 1/2 3/4 1/2 9.10 12.90 15.80 18.20 20.40 22.30 24.10 2.40 3.40 4.20 4.80 5.40 5.90 6.4050 1/2 3/8, 1/2 3/4 1/2, 3/4 11.40 16.10 19.70 22.80 25.50 27.90 30.20 3.00 4.30 5.20 6.00 6.70 7.40 8.0060 1/2 3/4 1/2, 3/4 13.60 19.30 23.70 27.30 30.60 33.50 36.20 3.60 5.10 6.30 7.20 8.10 8.90 9.6080 1/2, 3/4 1/2 3/4 3/4 3/4 18.20 25.80 31.60 36.50 40.80 44.70 48.20 4.80 6.80 8.40 9.70 10.80 11.80 12.70100 1/2, 3/4 1/2, 3/4 3/4 3/4 3/4 22.80 32.20 39.50 45.60 41.00 55.80 60.30 6.00 8.50 9.80 12.00 12.96 14.70 15.90120 3/4 27.30 38.70 47.40 54.70 61.20 67.00 72.40 7.21 10.22 12.51 14.44 16.16 17.69 19.11125 1/2, 3/4 28.50 40.30 49.40 57.00 63.70 69.80 75.40 7.50 10.70 13.10 15.10 16.80 18.40 19.90150 3/4, 1 3/4, 1 34.20 48.30 59.20 68.40 76.40 83.70 90.50 9.00 12.80 15.60 18.10 20.20 22.10 23.90160 3/4 3/4 36.50 51.60 63.20 73.00 81.60 89.40 96.50 9.64 13.62 16.68 19.27 21.54 23.60 25.48200 3/4, 1 1 3/4 3/4 45.60 64.50 79.00 91.20 102.00 112.00 121.00 12.10 17.00 20.90 24.10 27.00 29.60 32.00240 3/4 54.70 77.40 94.70 109.00 122.00 134.00 145.00 14.44 20.43 25.00 28.78 32.21 35.37 38.28250 1 1 57.00 80.70 98.80 114.10 128.00 140.00 151.00 15.10 21.30 26.14 30.10 33.80 37.00 39.90280 3/4 64.10 90.30 111.00 128.00 143.00 156.00 169.00 16.92 23.84 29.30 33.79 37.75 41.18 44.61300 1 68.40 96.80 119.00 137.00 153.00 168.00 181.00 18.10 25.60 31.40 36.20 40.40 44.40 47.80350 1 79.80 113.00 138.00 160.00 179.00 196.00 211.00 21.10 29.90 36.50 42.30 47.30 51.80 55.70

HOLLOW CONE - WR CAPACITY CHARTNOZZLE NUMBERPOLYPROPYLENE FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG SPRAY ANGLE (°)MALE FEMALE 1.5 3 4 5 7 20 40 60 80 100 AT 3 BAR (40PSIG)

29203-25 29204-25 3.5 4.70 5.50 6.10 7.30 0.85 1.20 1.50 1.70 1.90 7529203-37 29204-37 3.90 5.50 6.40 7.10 8.50 0.99 1.40 1.70 2.00 2.20 8029203-26 29204-26 4.30 6.30 7.30 8.20 9.70 1.10 1.60 2.00 2.30 2.60 9029203-27 29204-27 5.50 7.60 9.50 10.20 12.10 1.40 2.00 2.50 2.80 3.20 7029203-1 29204-1 6.70 9.50 10.90 12.20 14.50 1.70 2.40 2.90 3.40 3.80 9529203-2 29204-2 8.30 11.80 13.70 15.30 18.10 2.10 3.00 3.70 4.20 4.70 9029203-34 29204-34 8.30 11.80 13.70 15.30 18.10 2.10 3.00 3.70 4.20 4.70 15529203-28 29204-28 9.50 13.80 16.00 17.80 21.10 2.40 3.50 4.30 4.90 5.50 10529203-3 29204-3 9.90 14.20 16.40 18.30 21.70 2.50 3.60 4.40 5.10 5.70 8529203-29 29208-29 11.10 15.20 19.00 21.40 24.20 2.80 4.00 4.90 5.70 6.30 6029203-4 29204-4 12.20 17.40 20.10 22.40 26.50 3.10 4.40 5.40 6.20 6.90 8029203-5 29204-5 12.20 17.40 20.10 22.40 26.50 3.10 4.40 5.40 6.20 6.90 9529203-6 29204-6 13.80 19.70 22.80 25.70 30.20 3.50 5.00 6.10 7.10 7.90 7529203-7 29204-7 13.80 19.70 22.80 25.50 30.20 3.50 5.00 6.10 7.10 7.90 13029203-44 29204-44 15.40 22.00 25.50 28.60 33.80 3.90 5.60 6.90 7.90 8.80 5029203-30 29204-30 15.80 22.50 26.00 29.00 34.40 4.00 5.70 7.00 8.10 9.00 9029203-31 29204-31 16.60 23.60 27.40 30.60 36.20 4.20 6.00 7.30 8.50 9.50 6029203-40 29204-40 16.60 23.60 27.40 30.60 36.20 4.20 6.00 7.30 8.50 9.50 4529203-32 29204-32 19.80 27.60 31.90 35.70 42.20 5.00 7.00 8.60 9.90 11.10 6529203-8 29204-8 19.80 27.60 31.90 35.70 42.20 5.00 7.00 8.60 9.90 11.10 9029203-33 29204-33 20.90 29.60 34.20 38.30 45.20 5.30 7.50 9.20 10.60 11.90 8529203-9 29204-9 22.50 31.60 36.50 40.80 48.20 5.70 8.00 9.80 11.30 12.60 8529203-10 29204-10 22.50 31.60 36.50 40.80 48.20 5.70 8.00 9.80 11.30 12.60 12529203-35 29204-35 25.30 35.60 41.00 45.90 27.30 6.40 9.00 11.00 12.70 14.20 6029203-45 29204-45 28.00 39.50 45.60 51.00 60.30 7.10 10.00 12.20 14.10 15.80 5029203-12 29204-12 28.00 39.50 45.60 51.00 60.30 7.10 10.00 12.20 14.10 15.80 7029203-11 29204-11 28.00 39.50 45.60 51.00 60.30 7.10 10.00 12.20 14.10 15.80 115


LARGE HOLLOW CONE NOZZLES

WRA Type NozzleTwo piece construction (Body and cap) in aright angle design. Nominal spray angles of50° to 100° dependent upon flow size andpressure. Type WRA has an inlet designedfor insertion into a quick coupler connection.Material is Glass filled Polypropylene.

14

BE Type NozzleOne piece cast body in a right angledesign. Nominal spray angle of 55° to 90°dependant upon flow size and pressure.(See chart for details). Materials are, Cast Iron, Gunmetal and Stainless Steelas standard.



TYPICAL APPLICATIONSAerating water, brine sprays, chemical processing, coildefrosting, dust control, evaporative condensers,evaporative coolers, industrial washers, roof cooling,spray ponds, spray coating, gas scrubbing andwashing, humidification, gas cooling, cooling towers,coal washing, degreasing, gravel washing,dishwashing, foam control, industrial washing andwater fountains.


Producing uniform atomisation with no central distribution


WRS Type NozzleWRS is designed to promote larger dropletsize. Material is Glass filled Polypropylene.WRS spray angles from 100°-135°.

This is not our complete range of products, to see a full listing visit our website @

www.delavan.com for further details, or send for our

CD format Specifiers guide.


15



LARGE HOLLOW CONE - WRA/WRS CAPACITY CHARTFLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG

0.3 0.7 1 1.5 2 5 10 15 20 30

14 25 38 45 55 62 7.20 9.90 12.30 14.00 16.80

18 32 48 57 69 80 9.30 12.90 15.90 18.00 25.00

21 37 56 66 80 92 10.80 14.90 18.30 21.00 25.20

23 41 62 74 90 103 12.30 16.80 20.70 23.00 28.80

28 49 74 88 107 122 14.40 19.80 24.60 28.00 33.60

36 63 96 114 139 160 18.60 25.80 31.80 36.00 43.80

43 75 114 136 166 190 22.20 30.60 37.50 42.60 51.60

49 86 131 156 191 219 25.50 35.40 42.90 49.00 60.00

54 95 144 172 210 241 28.20 39.00 48.30 54.00 68.40

63 110 168 200 244 281 34.80 49.20 56.40 63.00 75.60

75 132 201 240 293 338 43.80 59.40 65.40 75.00 91.20

88 154 234 279 340 392 50.40 67.20 76.20 88.00 106.00

100 174 266 317 388 447 57.60 72.00 87.00 100.00 119.00

112 197 299 357 437 501 62.40 80.40 97.20 112.00 127.00

LARGE HOLLOW CONE - BE CAPACITY CHARTNOZZLE THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG NUMBER SIZE 0.3 0.5 0.7 1 2 3 4 5 10 15 20 30 40 60

23 1 1/4 1 1/2 45.00 56.00 64.00 77.00 107.00 130.00 150.00 12.30 16.80 20.70 23.40 28.80 33.00 40.20

28 1 1/4 1 1/2 52.10 65.60 75.50 91.50 128.00 152.00 175.00 14.40 19.80 24.60 27.60 33.60 38.40 47.20

36 1 1/4 1 1/2 66.30 84.80 98.40 118.00 163.00 198.00 228.00 18.60 25.80 31.80 36.00 43.80 50.10 61.20

43 1 1/4 1 1/2 79.50 101.00 117.00 140.00 192.00 237.00 268.00 22.20 30.60 37.50 42.60 51.60 60.00 72.00

49 1 1/4 1 1/2 90.00 116.00 135.00 160.00 223.00 272.00 321.00 25.50 35.40 42.90 48.90 60.00 69.00 86.40

54 1 1/4 1 1/2 102.00 128.00 149.00 180.00 254.00 313.00 353.00 28.20 39.00 48.30 54.00 68.40 79.20 94.80

63 2 123.00 159.00 188.00 210.00 281.00 341.00 402.00 34.80 49.20 56.40 63.00 75.60 86.40 108.00

75 2 152.00 200.00 226.00 243.00 339.00 417.00 504.00 43.80 59.40 65.40 75.00 91.20 106.00 136.00

88 2 180.00 230.00 256.00 283.00 393.00 492.00 598.00 50.40 67.20 76.20 87.60 106.00 125.00 161.00

100 2 208.00 262.00 274.00 324.00 442.00 549.00 661.00 57.60 72.00 87.00 99.60 119.00 139.00 178.00

112 2 227.00 284.00 306.00 362.00 473.00 587.00 705.00 62.40 80.40 97.20 112.00 127.00 149.00 190.00

122 2 246.00 306.00 332.00 402.00 554.00 682.00 813.00 67.20 87.00 108.00 122.00 149.00 173.00 218.00

144 2 256.00 317.00 371.00 442.00 665.00 814.00 938.00 69.60 97.20 119.00 144.00 179.00 206.00 252.00

NOZZLENUMBER

WRA & WRS


SMALL SOLID CONE NOZZLES

16



WDB Type NozzleBasic nozzle thread 9/16" – 24 UNEF, withoptional adaptors providing 1/8" and 1/2" pipethreads. Flow sizes from 0.5 to 20 with sprayangles of 30°, 45°, 60°, 70°, 80° and 90°.

WL TypeFlanged tip design for use with standardthreaded bodies and caps, available in flowsizes from 3 – 20 with spray angles of 45°,60° and 90°. One-piece body with removablescrewed core, using allen key.

BL Type NozzleOne-piece body with removable screwedcore, using allen key. Available only with 1/8"BSPT thread and in flow sizes from 3 – 20with spray angles of 45°, 60° and 90°.

BF TypeFlanged tip design for use with standardbodies and caps in sizes from 1 - 16. Spray angles of 30°, 60°, 90° and 120°.

TYPICAL APPLICATIONSAerating water, brine sprays, chemical processing,coil defrosting, dust control, evaporative condensers,evaporative coolers, industrial washers, roof cooling,spray coating, gas scrubbing and washing, coolingtowers, coal washing, degreasing, gravel washing,dishwashing, foam control, industrial washing andwater fountains.


Producing uniform distribution with fine atomisation



17



SMALL SOLID CONE - BF CAPACITY CHARTNOZZLE FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG NUMBER 1 1.5 2 3 4 5 7 15 20 30 45 60 70 100

1 0.45 0.56 0.64 0.78 0.86 0.94 1.14 0.12 0.15 0.17 0.21 0.23 0.25 0.30

2 0.89 1.11 1.26 1.54 1.71 1.87 2.27 0.24 0.29 0.33 0.41 0.45 0.49 0.60

3 1.34 1.67 1.90 2.32 2.57 2.81 3.41 0.35 0.44 0.50 0.61 0.68 0.74 0.90

4 1.79 2.22 2.53 3.10 3.42 3.75 4.54 0.47 0.59 0.67 0.82 0.90 0.99 1.20

5 2.23 2.78 3.15 3.86 4.28 4.68 5.68 0.59 0.73 0.83 1.02 1.13 1.24 1.50

6 2.68 3.34 3.79 4.64 5.13 5.62 6.81 0.71 0.88 1.00 1.23 1.36 1.48 1.80

8 3.57 4.44 6.28 6.18 6.84 7.49 9.08 0.94 1.17 1.66 1.63 1.81 1.98 2.40

10 4.40 5.56 6.31 7.72 8.56 9.36 11.35 1.16 1.47 1.67 2.04 2.26 2.47 3.00

12 5.36 6.67 7.58 9.28 10.27 11.24 13.62 1.42 1.76 2.00 2.45 2.71 2.97 3.60

16 7.14 8.90 10.10 12.37 13.73 14.98 18.16 1.89 2.35 2.67 3.27 3.63 3.96 4.80

SMALL SOLID CONE - WL/BL CAPACITY CHARTNOZZLE MESH FLOW RATE IN LITRES/HOUR AT BAR G FLOW RATE IN GPH AT PSIG NUMBER SIZE 0.7 1 1.5 2 3 4 6 7 10 15 20 30 45 60 90 100

3 200 7.40 8.70 10.40 11.90 14.20 16.20 18.90 20.70 1.82 2.17 2.64 3.06 3.75 4.33 5.31 5.73

4 200 9.90 11.60 13.90 16.00 19.00 21.70 25.30 27.70 2.43 2.88 3.54 4.09 5.02 5.79 7.08 7.66

5 200 12.30 14.40 17.30 19.90 23.70 27.00 31.50 34.60 3.04 3.62 4.44 5.13 6.26 7.24 8.85 9.56

6 100 14.80 17.30 20.70 23.90 28.40 32.40 37.80 41.50 3.62 4.33 5.31 6.13 7.50 8.67 10.62 11.47

7 100 17.30 20.30 24.20 27.90 33.20 37.80 44.20 48.50 4.23 5.05 6.21 7.16 8.77 10.12 12.39 13.39

8 100 19.70 23.10 27.70 31.80 37.90 43.20 50.40 55.30 4.83 5.79 7.08 8.19 10.01 11.57 14.16 15.30

9 100 22.20 26.00 31.20 35.90 42.70 48.70 56.80 62.30 5.44 6.50 7.98 9.19 11.28 13.02 15.93 17.22

10 100 24.60 28.90 34.60 39.80 47.40 54.00 63.00 69.20 6.05 7.21 8.85 10.22 12.52 14.45 17.70 19.13

16 50 39.50 46.30 55.40 63.80 75.90 86.50 101.00 111.00 9.70 11.54 14.16 16.35 20.05 23.14 28.27 30.64

20 50 49.30 57.80 69.20 79.60 94.80 108.00 126.00 138.00 12.10 14.45 17.70 20.45 25.04 28.80 35.40 38.31

SMALL SOLID CONE - WDB CAPACITY CHARTNOZZLE FLOW RATE IN LITRES/HOUR AT BAR G FLOW RATE IN GPH AT PSIG NUMBER 3 5 7 10 15 20 35 40 75 100 125 150 300 500

0.5* - 1.45 1.72 2.05 2.51 2.87 3.82 - 0.39 0.45 0.55 0.63 0.77 1.00

0.75* - 2.16 2.56 3.05 3.74 4.32 5.72 - 0.58 0.67 0.75 0.82 1.16 1.50

1 - 2.87 3.40 4.10 5.02 5.77 7.63 - 0.77 0.89 1.00 1.10 1.55 2.00

1.5 - 4.32 5.11 6.15 7.53 8.64 11.40 - 1.16 1.34 1.50 1.65 2.32 3.00

2 - 5.77 6.83 8.19 10.00 11.60 15.30 - 1.55 1.79 2.00 2.20 3.10 4.00

2.5 - 7.19 8.55 10.20 12.50 14.50 19.10 - 1.93 2.24 2.50 2.74 3.88 5.00

3 - 8.64 10.20 12.30 15.10 17.30 22.90 - 2.32 2.68 3.00 3.30 4.65 6.00

4 8.69 11.50 13.70 16.40 20.10 23.10 30.50 2.20 3.10 3.60 4.00 4.40 6.20 8.00

5 11.10 14.50 17.20 20.50 25.10 28.70 38.20 2.80 3.90 4.50 5.00 5.55 7.70 10.00

6 14.20 17.50 20.60 24.60 30.10 34.60 45.80 3.60 4.70 5.40 6.00 6.60 9.30 12.00

8 17.80 23.10 27.50 33.10 40.60 46.20 61.10 4.50 6.20 7.20 8.00 8.90 12.40 16.00

10 22.10 28.70 34.00 41.00 50.20 57.70 76.30 5.60 7.70 8.90 10.00 11.00 15.50 20.00

12 26.90 34.60 40.80 49.20 60.20 69.30 91.60 6.80 9.30 10.70 12.00 13.20 18.60 24.00

14 31.20 40.20 47.70 57.00 69.80 80.80 107.00 7.90 10.80 12.50 14.00 15.30 21.70 28.00

16** 35.60 46.20 54.60 65.20 79.80 92.40 122.00 9.00 12.40 14.30 16.00 17.50 24.80 32.00

18** 39.90 51.80 61.40 73.40 89.90 104.00 137.00 10.10 13.90 16.10 18.00 19.70 27.90 36.00

20** 44.60 57.80 68.30 81.60 99.90 115.00 153.00 11.30 15.50 17.90 20.00 21.90 31.00 40.00

* Not available in 30 or 45 degree** These sizes are supplied without strainers


SOLID CONE NOZZLES

18



BI Type NozzleBI 6 – 193 available. One-piece body withpressed in cross-milled core, which isremovable. Spray angles from 35° to 100°dependent upon flow size and pressure. Seechart for available thread sizes.

BQ Type NozzleBQ 6 – 193 available. One-piece body withpressed in cross-milled core, which isremovable. Spray angles from 35° to 100°dependent upon flow size and pressure. Seechart for available thread sizes. Produces asquare patern.

BN Type NozzleBN 6 – 200 available. One-piece body withpressed in cross-milled core, which isremovable. Spray angles from 85° to 135°dependent upon flow size and pressure. Seechart for available thread sizes.

BT Type NozzleBT 6 – 200 available. One-piece body withpressed in cross-milled core, which isremovable. Spray angles from 85° to 135°dependent upon flow size and pressure. Seechart for available thread sizes.

TYPICAL APPLICATIONSAerating water, brine sprays, chemicalprocessing, coil defrosting, dust control,evaporative condensers, evaporative coolers,industrial washers, roof cooling, spray coating,gas scrubbing and washing, cooling towers,coal washing, degreasing, gravel washing,dishwashing, foam control, industrial washingand water fountains.


Producing uniform distribution across a wide pressure range

CT Type NozzleCT 2 – 40 available. Two-piece body designavailable in flow sizes from 2 – 40 with sprayangles from 45° to 90°. See chart foravailable thread sizes. Unless otherwise stated, all nozzles and tips are

available in Brass and Stainless Steel as standard.


19



SOLID CONE - BI/BQ CAPACITY CHARTNOZZLE NUMBER THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG MALE &FEMALE SIZE 0.35 1 1.5 2 3 4 7 5 15 20 30 40 60 100

6 1/8 & 1/4 0.88 1.50 1.88 2.18 2.65 2.87 3.54 0.23 0.40 0.47 0.58 0.66 0.76 0.918 1/8 & 1/4 1.30 2.28 2.84 3.23 4.00 4.55 5.72 0.34 0.60 0.71 0.85 1.00 1.20 1.4811 1/8 & 1/4 1.63 2.87 3.62 4.05 4.87 5.36 6.74 0.42 0.76 0.90 1.07 1.21 1.42 1.7412 1/8 to 3/8 2.09 3.41 4.09 4.55 5.30 5.91 7.58 0.54 0.90 1.02 1.20 1.32 1.56 1.9616 1/4 & 3/8 2.50 4.41 5.30 6.14 7.27 8.00 10.04 0.65 1.16 1.32 1.62 1.81 2.11 2.5920 1/4 & 3/8 3.11 5.46 6.50 7.54 9.06 10.00 12.63 0.80 1.44 1.62 1.99 2.26 2.64 3.2522 1/4 & 3/8 3.58 6.24 7.51 8.32 9.78 10.91 14.24 0.92 1.64 1.87 2.20 2.44 2.88 3.6727 3/8 & 1/2 4.23 7.42 9.01 10.10 12.32 13.64 17.47 1.09 1.96 2.24 2.68 3.07 3.60 4.5032 3/8 & 1/2 5.81 8.88 10.81 12.32 14.44 15.96 20.40 1.50 2.34 2.70 3.24 3.59 4.20 5.2842 1/2 & 3/4 6.74 11.82 14.44 15.96 19.29 21.41 27.37 1.74 3.12 3.60 4.20 4.80 5.64 7.0849 1/2 & 3/4 8.17 14.24 16.36 18.69 23.13 25.05 32.52 2.11 3.76 4.08 4.92 5.76 6.60 8.4063 1/2 & 3/4 10.20 17.07 20.50 23.84 28.89 32.22 41.31 2.64 4.50 5.16 6.30 7.20 8.53 10.7077 3/4 12.32 20.50 23.94 29.09 34.95 38.68 49.29 3.18 5.40 6.36 7.69 8.70 10.20 12.7089 3/4 13.94 23.74 29.39 33.63 40.00 44.54 56.26 3.60 5.24 7.32 8.88 9.96 11.80 14.50102 3/4 14.85 27.37 33.73 38.68 46.26 50.00 64.54 3.84 7.20 8.40 10.20 11.50 13.20 16.70105 1 16.26 27.78 33.73 39.79 48.18 52.32 67.37 4.20 7.32 8.40 10.50 12.00 13.80 17.40123 1 19.49 34.64 42.32 46.56 57.77 63.63 80.40 5.04 9.12 10.60 12.30 14.40 16.80 20.80140 1 22.73 38.18 45.25 53.23 62.12 68.18 85.95 5.88 10.10 11.30 14.00 15.50 18.00 22.20162 1 25.55 44.64 53.03 61.41 72.22 79.08 101.00 6.60 11.80 13.20 16.20 18.00 21.00 26.20193 1 28.79 50.10 60.70 73.23 87.57 99.08 128.27 7.44 13.20 15.10 19.30 22.60 26.20 33.00

SOLID CONE - CT CAPACITY CHARTNOZZLE NUMBER THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG

FEMALE MALE SIZE 0.35 0.7 1.5 3 5 7 5 10 20 40 80 1002 2 1/8 0.53 0.76 1.10 1.58 1.98 2.29 0.14 0.20 0.28 0.40 0.55 0.603 3 1/8 0.84 1.14 1.70 2.37 2.88 3.43 0.22 0.30 0.43 0.60 0.80 0.90

3.5 3.5 1/8 0.95 1.34 1.98 2.69 3.32 3.82 0.25 0.35 0.50 0.68 0.92 1.004 4 1/8 1.07 1.53 2.21 3.16 3.97 4.77 0.28 0.40 0.56 0.80 1.10 1.255 5 1/8 1.37 1.91 2.77 3.75 4.69 5.72 0.36 0.50 0.70 0.95 1.30 1.50

6.5 6.5 1/4 1.79 2.48 3.56 5.14 6.13 7.25 0.47 0.65 0.90 1.30 1.70 1.909.5 9.5 1/8, 3/8 2.63 3.63 5.14 7.11 9.02 10.69 0.69 0.95 1.30 1.80 2.50 2.8010 10 1/4 2.78 3.82 5.53 7.50 9.74 11.45 0.73 1.00 1.40 1.90 2.70 3.0015 15 3/8 4.20 5.72 8.30 11.45 14.42 16.79 1.10 1.50 2.10 2.90 4.00 4.4016 16 1/2 4.60 6.10 8.69 12.25 15.50 17.94 1.20 1.60 2.20 3.10 4.30 4.7022 22 3/8 6.10 8.40 11.85 16.60 20.92 24.42 1.60 2.20 3.00 4.20 5.80 6.4025 25 1/2 6.87 9.54 13.83 18.96 24.16 28.24 1.80 2.50 3.50 4.80 6.70 7.4032 32 1/2 8.78 12.20 17.38 24.10 30.65 35.87 2.30 3.20 4.40 6.10 8.50 9.4040 40 1/2 11.07 15.26 21.73 30.00 38.22 45.03 2.90 4.00 5.50 7.60 10.60 11.80

SOLID CONE - BN/BT CAPACITY CHARTNOZZLE NUMBER THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG MALE &FEMALE SIZE 0.35 1 1.5 2 3 4 7 5 15 20 30 40 60 100

6 1/8, 1/4 0.88 1.50 1.88 2.18 2.65 2.87 3.54 0.23 0.40 0.50 0.58 0.70 0.76 0.938 1/8, 1/4 1.30 2.28 2.84 3.23 4.00 4.55 5.72 0.34 0.60 0.75 0.85 1.06 1.20 1.5111 1/8, 1/4 1.86 3.23 3.86 4.31 5.15 5.45 7.43 0.48 0.85 0.96 1.14 1.28 1.44 1.9215 1/4 2.60 4.50 5.26 5.59 6.64 7.24 9.16 0.69 1.19 1.39 1.48 1.75 1.91 2.4218 1/4 3.10 5.39 6.30 6.70 7.96 8.68 10.98 0.82 1.42 1.66 1.77 2.10 2.29 2.9022 1/4, 3/8 3.95 6.84 8.00 8.50 10.10 11.01 13.94 1.02 1.80 1.99 2.24 2.52 2.93 3.6025 3/8 4.27 7.24 8.43 9.32 11.01 12.32 15.76 1.10 1.91 2.10 2.46 2.76 3.24 4.0832 3/8 5.90 9.15 10.80 11.92 14.30 15.78 19.90 1.56 2.42 2.85 3.15 3.78 4.17 5.2539 3/8 7.20 11.15 13.14 14.52 17.40 19.20 24.25 1.90 2.94 3.47 3.83 4.59 5.07 6.4046 3/8, 1/2 8.13 13.64 15.86 17.27 19.29 22.32 27.88 2.10 3.60 3.96 4.56 4.80 5.88 7.2048 3/8, 1/2 8.33 15.25 16.87 18.18 23.13 24.54 32.52 2.28 4.02 4.20 4.80 5.76 6.48 8.4059 1/2 9.29 15.96 19.29 22.32 26.06 28.18 37.67 2.40 4.20 4.80 5.88 6.48 7.44 9.7265 1/2 12.00 18.60 21.92 24.21 29.00 32.05 40.40 3.17 4.91 5.79 6.39 7.66 8.46 10.6773 1/2 13.50 20.88 24.50 27.19 32.60 36.00 45.40 3.56 5.51 6.47 7.18 8.61 9.50 11.9982 3/4 15.35 23.74 27.98 30.91 37.07 40.91 51.61 3.96 6.24 6.96 8.16 9.24 10.80 13.3094 3/4 16.77 26.87 32.72 35.45 41.92 45.96 59.89 4.32 7.08 8.16 9.36 10.40 12.10 15.5098 3/4 18.08 27.78 34.24 37.27 44.34 50.00 64.54 4.68 7.32 8.52 9.84 11.00 13.20 16.70136 1 24.14 42.32 48.18 51.41 60.20 67.77 86.86 6.24 11.20 12.00 13.60 15.00 17.90 22.40153 1 27.88 46.97 53.93 57.97 67.47 76.36 98.07 7.20 12.40 13.40 15.30 16.80 20.20 25.30200 1 29.69 51.41 62.62 75.95 88.68 99.59 130.29 7.68 13.60 15.60 20.00 22.10 26.30 33.60


LARGE SOLID CONE NOZZLES

20



CM Type NozzleCM 16 – 105 available. One piece castbody with removable vane type core. Sprayangles of 45 to 110° dependent upon flowsize and pressure. See chart for availablethread sizes.

BY Type NozzleBY 23 – 96 available. One-piece cast bodywith removable vane type core. Sprayangles of 70 to 130° dependent upon flowsize and pressure. See chart for availablethread sizes.

Producing uniform distribution at low pressures

TYPICAL APPLICATIONSAerating water, brine sprays, chemical processing,coil defrosting, dust control, evaporative condensers,evaporative coolers, industrial washers, roof cooling,spray coating, gas scrubbing and washing, coolingtowers, coal washing, degreasing, gravel washing,dishwashing, foam control, industrial washing andwater fountains.


Unless otherwise stated, all nozzles are available inCast Iron, Stainless Steel and Gunmetal as standard.

This is not our complete range of products, to see a full listing visit our website @

www.delavan.com for further details, or send for our

CD format Specifiers guide.


21



LARGE SOLID CONE - CM CAPACITY CHARTNOZZLENUMBER THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG FEMALE SIZE 0.35 0.7 1 2 3 5 7 5 10 15 30 40 80 100

16 1 1/4 33.30 45.70 53.60 72.30 87.60 110.00 127.00 8.74 12.00 14.40 19.50 22.20 30.50 33.40

22 1 1/4 44.00 59.90 70.10 96.40 115.00 145.00 168.00 11.60 15.70 18.00 25.90 29.20 40.40 44.20

27 1 1/4 55.80 76.40 89.30 121.00 146.00 184.00 213.00 14.70 20.00 24.00 32.50 37.10 51.00 55.80

33 1 1/4 67.70 91.90 108.00 146.00 177.00 222.00 259.00 17.80 24.10 29.10 39.40 44.80 61.60 68.10

29 1 1/2 57.60 79.60 94.20 128.00 154.00 197.00 229.00 15.1 20.90 25.30 34.50 39.20 54.60 60.20

35 1 1/2 70.00 96.50 114.00 156.00 187.00 238.00 278.00 18.40 25.30 30.60 42.00 47.60 66.20 72.90

42 1 1/2 86.00 117.00 137.00 191.00 229.00 289.00 339.00 22.60 30.70 36.90 51.30 58.10 80.20 89.00

48 1 1/2 96.50 133.00 158.00 216.00 259.00 326.00 381.00 25.30 34.90 42.40 58.10 66.60 90.60 99.90

54 1 1/2 108.00 148.00 175.00 241.00 288.00 367.00 427.00 28.30 38.90 47.00 64.90 73.10 102.00 112.00

64 2 126.00 175.00 206.00 284.00 341.00 437.00 503.00 33.10 45.90 55.40 76.40 86.50 121.00 132.00

71 2 142.00 195.00 231.00 321.00 335.00 488.00 572.00 37.30 51.20 62.20 86.30 97.80 136.00 150.00

81 2 161.00 222.00 261.00 362.00 436.00 553.00 650.00 42.10 58.20 70.30 97.40 111.00 154.00 171.00

90 2 181.00 250.00 294.00 408.00 492.00 618.00 723.00 47.40 65.70 79.00 110.00 125.00 172.00 190.00

98 2 195.00 270.00 316.00 451.00 526.00 670.00 782.00 51.20 71.00 84.90 121.00 133.00 186.00 205.00

105 2 209.00 288.00 339.00 473.00 568.00 718.00 833.00 54.90 75.80 91.10 127.00 144.00 199.00 219.00

LARGE SOLID CONE - BY CAPACITY CHARTNOZZLENUMBER THREAD FLOW RATE IN LITRES/MIN AT BAR G FLOW RATE IN GPM AT PSIG FEMALE SIZE 0.35 0.7 1 2 3 5 7 5 10 15 30 40 80 100

23 1 1/4 49.40 64.00 75.40 103.00 117.00 147.00 173.00 13.04 16.90 19.90 27..19 29.61 38.81 45.67

28 1 1/4 59.50 78.20 91.50 118.00 145.00 179.00 206.00 15.71 20.64 24.16 31.15 36.70 47.25 54.38

35 1 1/4 75.90 101.10 115.00 137.00 179.00 225.00 274.00 20.04 26.69 30.36 36.17 45.31 59.40 72.33

37 1 1/2 80.50 106.00 125.00 166.00 199.00 252.00 294.00 21.25 27.98 33.00 43.82 50.37 66.53 77.61

42 1 1/2 89.20 119.00 138.00 187.00 218.00 275.00 323.00 23.55 31.41 36.43 49.37 55.18 72.60 85.27

47 1 1/2 98.80 133.00 154.00 210.00 254.00 319.00 373.00 26.08 35.11 40.65 55.44 64.29 84.21 98.47

52 1 1/2 110.00 146.00 170.00 227.00 277.00 353.00 - 29.04 38.54 44.88 59.93 70.11 93.19 -

66 2 137.00 188.00 219.00 294.00 355.00 - - 36.17 49.63 57.81 77.61 89.85 - -

73 2 149.00 204.00 240.00 325.00 390.00 - - 39.33 53.85 63.36 85.80 98.71 - -

78 2 161.00 220.00 256.00 347.00 420.00 - - 42.50 58.08 67.58 91.61 106.30 - -

89 2 183.00 247.00 291.00 403.00 486.00 - - 48.31 65.21 76.82 106.39 123.01 - -

96 2 197.00 270.00 313.00 441.00 515.00 - - 52.01 71.28 82.63 116.42 130.35 - -


ACCESSORIES

22



StandardThreadedNozzle Bodiesand CapsThese are designed to accept any standard flanged tip from thestandard nozzle range.

PART NUMBERTHREAD MALE FEMALE MALE FEMALE CAP

SIZE BRASS BRASS S/S S/S NYLON THREAD

1/8 BSP 32011-1 32012-1 32011-3 32012-3 3/8" BSPP

1/4 BSP 32013-1 32014-1 32013-3 32014-3 3/8" BSPP

3/8 BSP 32016-1 32017-1 32016-3 32017-3 3/8" BSPP

1/8 NPT 1171-1 1173-1 1171-3 1173-3 11/16" - 16UN

1/4 NPT 1167-1 1169-1 1167-3 1169-3 8474 11/16" - 16UN

3/8 NPT 50701-1 50702-1 50701-2 50702-2 11/16" - 16UN

STANDARD THREADED NOZZLE BODIES SELECTION CHART

PART NUMBERTHREAD STAINLESS

SIZE BRASS STEEL POLYPROPYLENE NYLON

3/8 BSP W00105-2 W00105-1 W01783

11/16" - 16 UN 1165-1 1165-3 8475

3/4" BSP W06248-1 W06248-3

STANDARD THREADED NOZZLE CAP SELECTION CHART

SwivelsFeatures:● Single and double swivel nozzle

bodies available in brass or nylon(white or black)

● Positive, leak-proof seals

● Can be adjusted a full 360° fordirected spraying

● Maximum Design Pressure: Metals -50 psig (3.4 Bar), Nylon – 100 psig (7 Bar)

● Maximum Design Temperature: 120°F (50°C)

PART NUMBER TYPE MATERIAL INLET PIPE SIZE

33764-1 Single Brass 1/8 NPTF

33765-1 Double Brass 1/8 NPTF

33764-2 Single Brass 1/4 NPTF

33765-2 Double Brass 1/4 NPTF

33764-3 Single Brass 1/4 NPTM

33764-3 Double Brass 1/4 NPTM

30387-8 Single Black Nylon 1/8 NPTF

30384-7 Double Black Nylon 1/8 NPTF

30387-9 Single Black Nylon 1/4 NPTF

30384-8 Double Black Nylon 1/4 NPTF

30387-12 Single White Nylon 1/4 NPTF

30384-11 Double White Nylon 1/4 NPTF

50554-1 Single Shutoff Black Nylon 1/4 NPTF

50554-2 Single Shutoff White Nylon 1/4 NPTF

50555-1 Double Shutoff Black Nylon 1/4 NPTF

50555-2 Double Shutoff White Nylon 1/4 NPTF

SWIVEL NOZZLE BODIES SELECTION CHART

Note: All outlets are 11/16" - 16UN

Dovetail NozzleBodiesFeatures:● 1/8", 1/4" & 3/8" Dovetail bodies for use

with LD Tip

● 3/4" & 1/2" Dovetail bodies for use withAD Tip

● High-pressure caps available for allbodies in LD range

Please note:- Welding Body versionavailable if required.

Type Brass Use Brass Cap No Stainless Steel Mild Steel Use S/S Cap No

1/4" BSP LDM Body ✓ W00105-2 ✓ W00105-1

1/4" NPT LDMX Body ✓ W00105-2 ✓ W00105-1

3/8" BSP LDM Body ✓ W00105-2 ✓ W00105-1

3/8" NPT LDMX Body ✓ W00105-2 ✓ W00105-1

1/2" BSP ADM Body ✓ W06248-1 ✓ W06248-3

1/2" NPT ADMX Body ✓ W06248-1 ✓ W06248-3

3/4" BSP ADM Body ✓ W06248-1 ✓ W06248-3

3/4" NPT ADMX Body ✓ W06248-1 ✓ W06248-3

LDW Welding Nipple Body ✓ ✓ W00105-1

ADW Welding Nipple Body ✓ ✓ W06248-3

DOVETAIL NOZZLE BODIES & CAPS SELECTION CHART


23



Eyelet BodiesConnect nozzles to pipe or hose

Features:● Delavan eyelets offer the most

economical method of attachingspray nozzles to pipe systems

● Easy installation; drill pipe ortube and clamp on eyelet

● Deliver high flow rate withminimum pressure drop

● Varied outlet sizes accept allstandard flanged nozzle tips andfilters or special swivel nozzles

● Design provided leak-proofservice

Construction and Materials:● One-piece design, hinged

bridge, locking screw

● Polypropylene/Nylon

CLAMP/ NPT/BSP DRILL BODYPART BODY PIPE TUBE SCREW SEAL SIZE FOR THREAD

NUMBER MATERIAL SIZE SIZE P/N P/N BOOM NPTM

10001 Nylon 1/2" 3/4" 10083 04010-1 87.5(11/32) 11/16-16

10000-2 Nylon 3/4" 1" 10083 04010-2 11.1(7/16) 11/16-16

38202 Nylon 1/2" 3/4" 10083 04010-1 87.5(11/32) 1/2" - 14

W06043 Poly 3/4" 1" 452020033 162503103 10.3 3/8 BSPM

W06046 Poly 1" 1 1/4" 452020033 162503103 10.3 3/8 BSPM

EYELET BODIES SELECTION CHART

PART COLOR Flow Rate in Litres/Min at Bar GNUMBER CODE 1 2 3 4

AP10 Tan 2.27 3.21 3.93 4.46

AP15 Light Blue 3.44 4.21 6.16 6.70

AP20 Light Green 4.46 6.25 8.05 9.37

AP25 Maroon 5.80 8.03 9.94 11.38

AP30 Dark Blue 6.70 9.82 11.84 13.84

AP40 Red 9.37 12.05 15.62 18.30

AP50 Brown 11.61 16.07 19.89 22.77

AP60 Grey 13.84 19.20 23.67 27.23

AP70 Pink 16.07 22.77 27.46 32.14

AP BALL JET NOZZLE SELECTION CHART IN LPM

PART COLOR Flow Rate in GPM at PSIGNUMBER CODE 15 30 40 60

AP10 Tan 0.60 0.85 1.00 1.18

AP15 Light Blue 0.91 1.11 1.50 1.77

AP20 Light Green 1.18 1.65 2.00 2.48

AP25 Maroon 1.53 2.12 2.50 3.01

AP30 Dark Blue 1.77 2.59 3.00 3.66

AP40 Red 2.48 3.18 4.00 4.83

AP50 Brown 3.07 4.25 5.00 6.02

AP60 Grey 3.66 5.07 6.00 7.19

AP70 Pink 4.25 6.02 7.00 8.49

AP BALL JET NOZZLE SELECTION CHART IN GPM

Tip FiltersStandard Flanges – for use withstandard flanged nozzles

Ball Check – for use with standardflanged nozzles to help stop dripping after pressure shut off

Threaded – for use with WM, WG and WA nozzle range

MATERIAL AND PART NUMBERSMESH SIZE STANDARD FLANGES BALL CHECK THREADED (SC TYPE)

Stainless Steel 40 - - W00089-301

Stainless Steel 50 28175-1 35288-7 -

Stainless Steel 80 - - W00089-302

Stainless Steel 100 28175-2 35288-8 -

Stainless Steel 200 28175-10 35288-10 W00089-303

Glass Filled Poly 50 26642-1 - -



Nylon 50 - 50136-1 -

Nylon 100 - 50136-2 -

TIP FILTERS SELECTION CHART


ACCESSORIES

24



T-Line StrainerFeatures:● Filter bowl and body in white nylon or

black polypropylene● Nylon filters have Viton and Buna

gaskets and polypropylene filters haveEPDM gaskets

● Maximum design pressure: Nylon: 150 psi(10 bar); Polypropylene 75 psi (5 bar)

● Maximum design temperature: 70°F (21°C)

Mesh 1/2" 3/4" 1" 11/4" 11/2"Size Complete Ass. Screen Complete Ass. Screen Complete Ass. Screen Complete Ass. Screen Complete Ass. Screen

20 W11736-53 W12544-4 W11736-56 W12544-4 W11736-59 W12544-7 W11736-62 W12544-10 W11736-65 W12544-13 40 W11736-54 W12544-5 W11736-57 W12544-5 W11736-60 W12544-8 W11736-63 W12544-11 W11736-66 W12544-14 80 W11736-55 W12544-6 W11736-58 W12544-6 W11736-61 W12544-9 W11736-64 W12544-12 W11736-67 W12544-15

T-LINE STRAINER SELECTION CHART POLYPROPYLENE

PRV’sFeatures:● Nylon PRV for maximum corrosion

resistance with max pressure upto 400 psig (27Bar)

● Brass PRV for durability and strength withmax pressure upto 700 psig (48 Bar)

● Construction that allows useage of up to15gpm (57Lpm)

● A positive viton seal prevents leakage andprovides the best chemical resistance

PRESSURE RANGE MATERIALPSIG Bar Brass Nylon0-250 0-17 13895-7

0-100 0-7 37562-5 13895-16

0-400 0-27.6 13895-17

0-60 0-4 13895-18

100-250 7-17 37562-6

250-400 17-27.6 37562-7

400-700 27.6-48 37562-8

PRV’S SELECTION CHART

Replacement Gasket (poly) W12545-6 W12545-6 W12545-9 W12545-9 W12545-9

Pipe Size (NPT) 3/4" inlet and outlet.

Ball ValvesHalf Union Ball ValveFeatures:● Half-union, full post ball valves are made

of Poly-Glass for excellent corrosionprotection and added strength but are also light weight and easy to handle

● Restriction free-flow

● Viton O-rings

● Teflon ball seats for long-life and sureseating of ball

● Simple design allows easy access to the valve when replacing seals becomes necessary

● Special retaining collar makes valvemounting quick and easy

Part No PIPE SIZE DIMENSIONS IN (mm)45638 NPT (F) A B C D E

-1 1/2" FP 2.8(70) 1.9(48) 0.87(22) 1.3(32) 0.98(25)

-2 3/4" FP 3.6(92) 2.2(55) 1.2(30) 1.7(43) 1.3(32)

-3 1" FP 3.6(92) 2.2(55) 1.2(30) 1.7(43) 1.3(32)

-4 1.25 FP 4.6(117) 3.3(85) 1.9(49) 2.1(54) 2.0(52)

-5 1.5 FP 4.6(117) 3.3(85 1.9(49) 2.1(54) 2.0(52)

-7 2 FP 5.5(140) 3.9(100) 2.3(59) 2.7(68) 2.5(64)

-8 3 FP 6.7(170) 4.7(120) 2.9(75) 3.5(89) 3.4(86)

BALL VALVE SELECTION CHART

Max Design Pressure:1/2” – 1” 150 psig (8.5 Bar)

1/5” - 3” 100 psig (7 Bar)

Max Design Temperature:120°F (50°C)

High PressureSpray GunsFeatures:● Manufactured in a range of flows

and pressures

● Various models in different styles

● Trigger lock-off for safety

● A range of compatible hand lancesand accessories are available

● Max design pressure : 3500 PSIG (172 Bar)

● Max design temperature: 160°F (70°C)

PART NUMBER

Hand Gun (Brass with S/S seat) 50389-1

Hand Gun (All Stainless Steel) W186280001

Steel Lance 18" (45cm) 50551

Steel Lance 24" (60cm) 50552

Stainless Steel Lance 20" (50cm) W196230020

Stainless Steel Lance 40" (100cm) W196230012

Repair Kit 50424

HIGH PRESSURE SPRAY GUNS SELECTION CHART

Warning – PRV can explode if plumbed improperly. Be sure fluid flow is correct and product is never operated at higher than maximum pressures listed

Mesh 1/2" 3/4" 1" 11/4" 11/2"Size Complete Ass. Screen Complete Ass. Screen Complete Ass. Screen Complete Ass. Screen Complete Ass. Screen

20 W11736-4 W12544-4 W11736-7 W12544-4 W11736-10 W12544-7 W11736-13 W12544-10 W11736-16 W12544-13 40 W11736-5 W12544-5 W11736-8 W12544-5 W11736-11 W12544-8 W11736-14 W12544-11 W11736-17 W12544-14 80 W11736-6 W12544-6 W11736-9 W12544-6 W11736-12 W12544-9 W11736-15 W12544-12 W11736-18 W12544-15

T-LINE STRAINER SELECTION CHART NYLON

Replacement W12545-4Gasket (buna) W12545-4 W12545-8 W12545-8 W12545-8


25



Adjustable JointFeatures and Positioning:● Facilitates finger-tight nozzle

adjustment without disturbingpiping system

● Complete 360° radial adjustmentand 50° angular adjustment

Construction and Materials:● Available with Male inlet

connections and Female outletsin BSP or NPT threads

● Available in Brass and Stainless Steel

● Positive O-ring seal handlespressures up to 35 Bar G

ASSEMBLY INLET OUTLET A BNUMBER SIZE SIZE Anglear

BSP NPT BSPT/NPT BSPT/NPT mm Inches mm Inches Adjustment

W09111-1 31090-2 1/8" 1/8" 28.6 1.1/8 25.4 1 50

W09111-2 31090-4 1/4" 1/8" 28.6 1.1/8 25.4 1 50

W09111-3 31090-6 1/4" 1/4" 34.9 1.3/8 31.8 1 1/4 50

W09111-4 31090-8 3/8" 1/4" 34.9 1.3/8 31.8 1 1/4 50

W09111-5 31090-10 3/8" 3/8" 44.5 1.3/4 38.1 1 1/2 40

W09111-6 31090-12 1/2" 1/2" 55.6 2 3/16 44.5 1 3/4 40

W09111-7 31090-14 3/4" 3/4" 61.1 2 13/32 50.8 2 40

W09111-8 31090-16 1" 1" 75 2 19/20 70 2 3/4 40

ADJUSTABLE JOINT SELECTION CHART

HNS THREAD DIMENSIONS IN (mm) HOLENUMBER SIZE A B C D SIZE

125 1/8" 12.7 3.2 9.1 14.3 9.5

250 1/4" 15.9 3.2 15.1 19.1 15.9

375 3/8" 19.1 3.2 15.1 25.4 15.9

500 1/2" 22.3 4.8 21.8 31.8 22.2

750 3/4" 22.3 4.8 21.8 31.8 22.2

1000 1" 25.3 6.4 31.4 38.1 31.8

NOZZLE SOCKETS SELECTION CHARTNozzle SocketsUsed for welding or brazing to spraypipe/manifold assemblies to enableMale threaded nozzles to be fitted.

Features:● Available with female BSPP

threads only

● Available in Brass, StainlessSteel and Mild Steel

● Refer to chart for pipe drilledhole size

AdaptorsFeatures:● 90° adaptor for positioning

of nozzles

● Available in brass and stainlesssteel – other materials availableto special order

MALE ADAPTOR PART NO FEMALE ADAPTOR PART NO A BSTAINLESS STEEL BRASS STAINLESS STEEL BRASS THREAD SIZE Male & Female THREAD SIZE Male & Female

W00081-1 W00081-2 W00216-1 W000216-2 1/4" 1/8"

W00318-1 W00318-2 W00464-1 W00464-2 1/4" 1/4"

W00082-1 W00082-2 W00217-1 W00217-2 3/8" 1/4"

W00319-1 W00319-2 W00463-1 W00463-2 3/8" 3/8"

W00083-1 W00083-2 W00218-1 W00218-2 1/2" 3/8"

W00320-1 W00320-2 W00462-1 W00462-2 1/2" 1/2"

W00084-1 W00084-2 W00219-1 W00219-2 3/4" 1/2"

W00194-1 W00194-2 W00196-1 W00196-2 3/4" 3/4"

W00085-1 W00085-2 W00220-1 W00220-2 1" 3/4"

W00468-1 W00468-2 W00470-1 W00470-2 1" 1"

ADAPTORS SELECTION CHART

ITEM NO DESCRIPTION IN (mm) P/N W13772 1.25" P/N W13773 1.5"

1 Screw 0.39 x 1.6 (10x40) HSC0100037 HSC0100037

2 Body Polyglass W13774 W13258

3 Spring Clip (SS) W13257 W13258

4 Nyloc Nut 0.39 (10) HNU0004028 HNU0004028

Pipe SupportClips & ClampsFeatures:● Quick and secure method of

attaching plastic pipes to sheetmetal or hangers

● Glass reinforced polypropylenefor strength and chemicalresistance

● Sizes to fit 1/2”,3/4”, 1.25” and1.5” nominal bore pipe sizes(clips 1.25 and 1.5 only)

● Support fixing screw will not turn when locking nut is beingscrewed down

● Accepts fixing screws of varying lengths

PIPE SUPPORT CLIP SELECTION CHART

PART NO PIPE SIZE SCREW SIZE IN (mm)

W10892-1 1/2" NB 0.31 x 1.7 (8 x 45)

W10892-2 3/4" NB 0.31 x 1.7 (8 x 45)

W10892-3 1.24" NB 0.39 x 1.6 (10 x 40)

W10892-4 1.5" NB 0.39 x 1.6 (10 x 40)

PIPE SUPPORT CLAMP SELECTION CHART

Construction and Materials:● Clip is one-piece body with spring clip. Clamp is one-piece with hinged bridge piece

● Both with glass reinforced body. Clip has stainless steel spring clip and Clamp hasstainless steel hinge pin, screw insert and fixing screws

Typical Ordering Instructions:● W13772 Support Clip to fit 1.25” NB Pipe or W10892-2 Pipe Clamp to fit 1/2” NB Pipe

● Maximum pressure and temperature is needed


SPECIAL PURPOSE

26



AJ150 Type NozzleDelivers high impact, flat streams of compressed air.Can be mounted side by side to produce an air curtain.Available in Polyacetal.1/4" BSPT AJ 150 Part No:- W18783-11/4" NPT AJ 150 Part No:- W18783-2

AIRCONSUMPTION

0 1 2 3 4 5 6 7 80

10

20

AIRFLOWM3/HR

40

50

60

PRESSURE (BAR)

AJ 150 SOUND LEVEL CHART

170

SO

UN

D L

EV

EL

(dB

)

AIR PRESSURE (BAR)

2 3 4 5 6

75

80

85

90

Type BBEductorFeatures:● One piece design with no internal

components. Available with 3/8, 1/4and 1/2 BSP male threads.

● Maximum Design Pressure:- StainlessSteel – 500 psi (35 bar).Polypropylene – 150 psi (10 bar)

● Maximum Design Temperature:-Stainless Steel – 900°F (500°C).Polypropylene – 170°F (75°C)

NOZZLE ORI SIZE THREAD Flow Rate in Litres/Min at Bar GNUMBER Inch(mm) SIZE 0.7 2 3 4 5 7 15

50 0.173 (4.4) 3/8, 1/2 9.60 16.40 20.00 21.30 25.80 30.19 32.20

75 0.212 (5.4) 3/8, 1/2 14.40 24.60 30.00 34.80 38.90 45.30 48.30

100 0.25 (6.4) 3/8, 1/2, 3/4 19.10 32.20 40.00 45.60 51.00 60.38 64.40

125 0.279 (7.1) 1/2, 3/4 24.00 40.30 50.00 58.00 63.75 75.48 80.50

150 0.307 (7.8) 1/2, 3/4 28.80 48.60 60.00 68.80 76.50 90.12 96.40

175 0.330 (8.4) 1/2, 3/4 33.40 56.50 69.00 79.80 89.25 105.57 110.90

200 0.346 (8.8) 1/2, 3/4 38.00 64.30 78.80 91.00 102.00 120.31 128.60

250 0.385 (9.8) 1/2, 3/4 47.60 80.40 98.80 114.00 128.00 150.00 160.80

300 0.433 (11.0) 1/2, 3/4 57.20 96.90 118.30 136.60 153.00 180.70 197.80

350 0.468 (11.9) 1/2, 3/4 66.50 112.50 138.00 156.20 178.00 210.54 225.00

400 0.5 (12.7) 1/2, 3/4 76.00 129.00 157.00 181.20 202.50 241.10 258.00

BB EDUCTOR NOZZLE SELECTION CHART IN LPM

NOZZLE ORI SIZE THREAD Flow Rate in GPM at PSIGNUMBER Inch(mm) SIZE 10 30 40 60 70 100 115

50 0.173 (4.4) 3/8, 1/2 2.50 4.30 5.30 6.10 6.80 7.98 8.50

75 0.212 (5.4) 3/8, 1/2 3.80 6.50 7.90 9.20 10.30 11.90 12.80

100 0.25 (6.4) 3/8, 1/2, 3/4 5.00 8.50 10.60 12.00 13.50 15.90 17.00

125 0.279 (7.1) 1/2, 3/4 6.30 10.60 13.20 15.30 16.80 19.90 21.30

150 0.307 (7.8) 1/2, 3/4 7.60 15.80 15.90 18.20 20.20 23.80 25.50

175 0.330 (8.4) 1/2, 3/4 8.80 14.90 18.20 21.10 23.60 27.90 29.30

200 0.346 (8.8) 1/2, 3/4 10.00 16.00 20.80 24.00 27.00 31.70 34.00

250 0.385 (9.8) 1/2, 3/4 12.60 21.20 26.10 30.10 33.80 39.60 42.50

300 0.433 (11.0) 1/2, 3/4 15.10 25.60 31.30 36.10 40.40 47.70 52.30

350 0.468 (11.9) 1/2, 3/4 17.60 29.70 36.50 42.10 47.00 55.60 59.40

400 0.5 (12.7) 1/2, 3/4 20.10 34.10 41.50 47.90 53.50 63.70 68.20

BB EDUCTOR NOZZLE SELECTION CHART IN GPM

MOULDED EDUCTOR

METAL EDUCTOR


27



Nozzle Specification InformationFax Back Form

This enquiry sheet serves as a guide so that we may better assist you in proper nozzle selection. Manytimes the optimum nozzle combination cannot be found on the first attempt but the more completely thisform is filled out, the better our chance of success.

Name: ________________________________________________ Date: _____________________________________________

Company:_________________________________________________________________________________________________

Address: __________________________________________________________________________________________________

___________________________________________________________________________________________________________

___________________________________________________________________________________________________________

Tel No:________________________________________________ Fax No:___________________________________________

To specify any type of nozzle it is essential to provide several pieces of information:

Flow rate: ________________________________________________________________________________________________

which can be given in a variety of units such as:● Litres per minute ● Gallons per minute (specify US or Imp)● M3/hour ● Kg per hour (density will be required if different from water)

Operating pressure: _____________________________________________________________________________________which can be given in a variety of units such as:● Bar.G. ● P.S.I.G.● Kg/cm2 ● kPa (Kilo Pascals)● Head in Metres or Feet

Spray angle: _____________________________________________________________________________________________

Type of spray pattern: ___________________________________________________________________________________● Flat ● Solid Cone/Circular or Square● Hollow Cone ● Air Atomising

Liquid being sprayed: ___________________________________________________________________________________

If different from water the following are required:

● Density: ____________________________ ● Viscosity: _______________________________________

● Surface Tension: ____________________ ● Solids Content : ______________________________________

Application or Purpose of Nozzle (not always necessary) e.g.● Washing/Rinsing ● Cleaning in Place ● Humidification● Gas Scrubbing ● Quenching● Aeration of liquids ● De-Scaling● Gas Cooling - Separate Enquiry Sheet required (Available on our website or on CD-rom)● Spray Drying - Separate Enquiry Sheet required (Available on our website or on CD-rom)

___________________________________________________________________________________________________________

___________________________________________________________________________________________________________

Please fax back to:

+44 (0)151 495 1043or for the USA 803 245 4146

✁


Delavan Ltd. • Gorsey Lane • Widnes Cheshire • WA8 0RJ • England.

Telephone: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043e-mail: [email protected] Web: www.delavan.com

P.O. Box 969 • Bamberg, S.C. 29003 Phone: 803-245-4347 • Fax: 803-245-4146

Toll free: 1-800 Delavane-mail: [email protected] Web: www.delavan.com

Dealer Stamp

This guide gives a generaloverview into the uses andapplications of nozzles in thesteel making process.

Metal Manufacturing

This guide gives a briefoverview of our new VCNnozzle, showing its use in awide variety of applications.

Variable Coating Nozzle

This guide includes anintroduction to spray drying technology as well as Delavan’scomprehensive range of Spray Drying nozzles.

Spray Drying Product Guide

A 20 page guide of ourcomprehensive range of emergency safety showers, eyebaths andassociated products.

Safety Showers & Eyebaths

A new guide to Delavan’sextensive range of oil burner nozzles.

Oil Burner Guide

Total Control - Specifiers Guide Available in CD format – the easiest touse in the Industry

With over 30,000 nozzle and accessorylistings and details. Also featuring an in-depth guide to nozzle technology.

Spray Nozzles andShowers for the Pulp & Paper Industry

Details of all our products are available on our website @ www.delavan.com

Everything you’ll ever need to know about nozzles

This 12 page guideincludes nozzles andshowers needed for thevarious stages involved inthe paper making process.


SPRAY NOZZLES - Delavan · 2017-12-20 · ED 45° – 90° Flat disc with 5/8" UNF thread for...

Documents

Transcript of SPRAY NOZZLES - Delavan · 2017-12-20 · ED 45° – 90° Flat disc with 5/8" UNF thread for...