sppt
-
Upload
aravind-g-s -
Category
Documents
-
view
103 -
download
0
Transcript of sppt
Dr.Ambedkar Institute Of Technology
A Presentation on: “ PERSONAL UTILITY VEHICLE”
Submitted By : Under the guidance of:Aravinda G S DR.B.Gangadhar ShettyGurudutt T SGuruprasad S SimpyPrasanna Ganesh Thunga C
Personal utility vehicle is a three wheeled, battery powered, electric vehicle.
It is based on the idea of a Segway.The name segway is derived from the Italian
word segue meaning smooth transition. It can also be referred as a personal transporter. It is one of the leaders in personal and green
transportation.The device is technologically advanced and
easy to use , and when controlled in the correct manner.
Introduction:
Fuel prices have risen, pollution levels are increasing day by day ,there is a greater awareness of the damage caused by carbon dioxide and other green house gases.
The personal utility vehicle helps in reducing pollution by cutting down oil usage and by using the existing energy sources efficiently.
They do not produce any emission during the operation.
Problem Definition:
• Batteries – Lead acid batteries (12V or 24V depending on the power required for the motors).
• Motors – 12V or 24V DC motors.• 3 wheels.• Handle for manoeuvring the vehicle.• Rim braking system.• Wooden board for assembly and support.• DC motor control drive.
Literary Survey:
• Wooden boxSpecifications:Wood used- Jungle woodLength- 425 mmWidth- 575 mmHeight- 300 mm
• BatteriesQuantity-2Specifications:Type- Lead-acid rechargeableCurrent- 7.5 ampsVoltage- 12V
• MotorsQuantity-2Specifications:Speed- 1500 RPMVoltage- 12VPower- 0.2 HP
• Wheels:Quantity- 3Front wheel - castor wheel (nylon material)Rear wheels – Rubber wheels
• DC motor control drive:It is an electronic component which helps in controlling the speed of the motor.
• Specifications• Power requirement: 10-50VDC • Rated current: 40A ( Maximum
output ) • Frequency: 12000HZ • Control Motor Power: 0.01-2000W,• 12V:480W (max), 24V:960W (max) • 36V:1440W (max), 50V:2000W
(max)• Regulation range: 5-100% • PCB Size: 90x51mm (inch: 3.5"x2") • Weight: 130g
• HandleTwo stainless steel 1 inch dia pipes of lengths 3 feet and 1 foot are welded together in the form of T.
PUV runs on 3 wheels.The motors run using 12V or 24V
rechargeable lead-acid batteries.The motor speed is set by the DC motor
control drive.The motors are directly connected to the
rear wheels.Speed is controlled using mechanical braking
system. It is a rear wheel driven vehicle.The directions are controlled using a handle.
Working:
A clean, green, eco-friendly machine(zero emission).
Low operating costs.Very economical when compared to Segway.More work can be done by using the product
vs walking.Reduces fatigue caused by walking.
Advantages:
Slow having a maximum speed of 12.5mph.Does not exactly say how far the segway will
go with riders of different masses.Heavy weighing around 100lbs.Unlike bicycles, a drained segway cannot be
pedalled home.Expensive.Ground clearance is less.
Disadvantages:
Final assembly
Assembly of motors within the box:
Final assembly of the vehicle: CATIA Modelling
Front view :
Side view:
Sectional view:
Final draft with dimensions:
Applications:
• The vehicle can be further enhanced by using high capacity motors and dc motor drive of high amps.
• Attaching a seat the vehicle can be used by physically disabled.
• PUV racing can be organized.
• Future Enhancements
THANK YOU