Sponsor: Dr. Chris Alexander, P.E. Principal Engineer ... · Jon Rickert David Siceluff Cristian...

15
Team Alpha Jon Rickert David Siceluff Cristian Sanchez Nathan Abernathy Brandon Kalla Grady Bernard Sponsor: Dr. Chris Alexander, P.E. Principal Engineer Design of a Diverless Composite Repair System for Underwater Pipelines Senior Design Presentation Team Beta Dane Yates Jevon Phandi Kyle Mclaughlin Mark Tuck Nicholas Garcia Ye Xie

Transcript of Sponsor: Dr. Chris Alexander, P.E. Principal Engineer ... · Jon Rickert David Siceluff Cristian...

Team Alpha Jon Rickert

David Siceluff Cristian Sanchez

Nathan Abernathy Brandon Kalla Grady Bernard

Sponsor: Dr. Chris Alexander, P.E.

Principal Engineer

Design of a Diverless Composite Repair System for Underwater Pipelines

Senior Design Presentation

Team Beta Dane Yates

Jevon Phandi Kyle Mclaughlin

Mark Tuck Nicholas Garcia

Ye Xie

• Non-leaking underwater pipe damage • Reduced hoop strength

Problem Introduction

Kyle McLaughlin

http://www.pro-rov.com/?page/147397/3d-photogrammetry

https://pangeranlaut.wordpress.com/2016/02/17/pipeline-global-gucklingupheaval-bucklingsneaking/

• Hand-Wrap Composite

• Repairs performed by humans

Onshore Solution

Mark Tuck

http://myoilpatch.com/Install.aspx http://www.powerwraplp.com/gallery.php?galid=1

•Diver Operated •Dexterously Complex •Numerous steps

Current Shallow Water Solution

Mark Tuck

https://www.youtube.com/watch?v=RDLajRS7hdo

• Each clamp is custom made

• Extensive design process •Expensive

Current Deep Water Solution

Jevon Phandi

http://www.oceaneering.com/pipeline-connection-repair-systems/diver-installed-pipeline-systems/smart-clamp/

http://energy-pubs.com.au/oil-gas-australia/combining-teamwork-for-success/

Goal

Ye Xie

Detailed needs

1. Repair time less than 24 hours

2. Perform at depths of ≤6,000 ft (2,700 psi)

3. Reusable and robust design

Develop a diver-less repair system for external reinforcement of dented or corroded pipes in deep water environments

Our Solution

Jon Ricket

Prototype Details - Chassis

Nathan Abernathy

Stationary Chassis Rotary Chassis

Interlocking Large Gear Assembly

Cristian Sanchez

Rack and Pinion Alignment Locking

Nathan Abernathy

Composite Wrap Spool

Nathan Abernathy

Composite Wrap Squeegee

Jon Rickert

• Prototype

– Material selection

– Tolerances/ Factor of safety

– Ergonomic ROV Interface

Opportunities for Improvement

Kyle McLaughlin

• Composite wrap material selection and testing • Dent filler material and applicator • FEA

Opportunities for Improvement

Nicholas Garcia