Spider Fittings - Preference · Spider Fittings KELLAN Spider Fittings. 200SP4 200SP3 200SP2-90...
12
Spider Fittings KELLAN Spider Spider Fittings Fittings
Transcript of Spider Fittings - Preference · Spider Fittings KELLAN Spider Fittings. 200SP4 200SP3 200SP2-90...
Spider Fittings KELLAN
SpiderSpiderFittingsFittings
200SP4
200SP3
200SP2-90
Spider Fittings KELLAN
ARC DESIGN200mm c/c
Spider Fittings KELLAN
ARC DESIGN200mm c/c
200SP2-180
200SP1
220SP4
220SP3
220SP2-90
Spider Fittings KELLAN
STAGE DESIGN220mm c/c
Spider Fittings KELLAN
STAGE DESIGN220mm c/c
220SP2-180
220SP1
220SP1-WM
220SP2-WM220mm c/c
Spider Fittings KELLAN
STAGE DESIGNOptions : 220SP1-WM (LH)
220SP1-WM (RH)
Spider Fittings KELLAN
FIN SPIDERF200SP2-FTIncludes Bolts & Nuts
Note: Use SP-AR04 Flathead Articulate Routel
200SP4-FT200mm c/c
SP-AR01
SP-AR01F
Spider Fittings KELLAN
ARTICULATE ROUTELCountersunk Articulate Routel
Glass Thickness: ≤ 17.52mm
Front Fix Countersunk Articulate Routel
Spider Fittings KELLAN
ARTICULATE ROUTEL
SP-AR02FFront Fix Flathead Articulate Routel
Glass Preparation – User’s discretion Required
Flathead Articulate RoutelGlass Thickness: ≤ 17.52mm / 26mm
SP-AR02
SP-AR04
SP-Z01
Spider Fittings KELLAN
ARTICULATE ROUTELFlathead Articulate RoutelNote: For Fin SpiderF only
SpiderF BaseComprising 2 parts of : SS316 & LOW CARBON STAINLESS STEEL
Spider Fittings KELLAN
Preference Manufacturing Pte Ltd
No.2 Kallang Pudding Road #01-02/06/07 Mactech Industrial Building Singapore 349307Tel: (65) 6746 5185 Fax: (65) 6746 8749 Email: [email protected] Website: www.preference.com.sg
Applications
● Suitable for glass facade, skylights, interiorglass and architectural systems.
● Available in various centre - centre combination:100mm,150mm, 200mm, 250mm, 300mm
Finishes
● Polished Stainless Steel● Satin Stainless Steel
Material
● SUS 316
test report
PSB Corporation, Singapore● AISI 316 – Chemical Composition Analysis Test● Load Capability Test
Design Load
Design Axial Load Capabilityof Single Arm (N) - Negative WindLoad
200mm Type 2500210mm Type 3000220mm Type 3500250mm Type 4000300mm Type 4500220SP1 / SP2-WM 4000SP-AR01 4500SP-AR02 / 02F 4500
Design Radial Load Capability of Single Arm (N) – Self-Weight
200mm Type 1200210mm Type 1500220mm Type 1800250mm Type 2000300mm Type 2200220SP1 / SP2-WM 2000SP-AR01 2000SP-AR02 / 02F 2000
Note:The above design values shown in the table are considered acceptable in certain countries. It may not be adequate to fulfill acceptance criteria in other countries which require more stringent requirements. It is suggested to multiply the values in the table with a factor of 0.9. Otherwise, the designer needs to test for adequacy against relevant national standard before use.
Spider Fittings KELLAN
