HAZET-WERK - Hermann Zerver GmbH & Co. KG · Created Date: 2/4/2019 12:45:00 PM
SPIAS I / 019 · 2019. 5. 21. · • noise level 903 dB(A) • spare parts available NEW PRODUCT!...
Transcript of SPIAS I / 019 · 2019. 5. 21. · • noise level 903 dB(A) • spare parts available NEW PRODUCT!...
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
SPECIALS I / 2019E U R O P E A N Q U A L I T Y T O O L S
Hand tools UNIOR 623200• containssidecutters(160mm),combinationpliers(180mm)andlongnosepliers(160mm)
• chromeplatedsurface,polishedheads• twocomponentcushiongriphandle• suppliedinpre-cutfoam• cuttingcapacitysidecuttersandcombinationpliers: 1.6-2.5mm(copperandmediumwire)
• cuttingcapacitylongnosepliers: 1.6-2.0mm(copperandmediumwire)
• serratedgrippingsurfaceonlongnosepliers• madeinEurope(Slovenia)
3 PIECE PLIERS SET
MUST HAVE! $114.50NEW SET!
Hand tools
15 PIECE DOUBLE OPEN-END ELECTRIC WRENCH SET UNIOR 619287
• forfinemechanicalandelectronicswork• forged,entirelyhardenedandtemperedbody• samesizeonbothends• headsoffset• short,thinstyle(2-3mmthicknessatjaw)• containssizes3.2,3.5,4,4.5,5,5.5,6,7,8,9,10,11,12,13and14mminrollpouch
• madeinEurope(Slovenia)• allsizesalsoavailableindividuallyforreplacements
$108.50NEW SET!
$129.00
Hand tools
AUTOMATIC SPRING CLIP PLIERS WITH BOWDEN CABLE UNIOR 620234
• forhoseclipsoncooling,heating,fuelorscreen-washersystemsofmostcars
• fitsmoststandardsizeclampsfrom18to54mm
• 600mmbowdencableforuseinhardto reach places where clips can’t be reached with other pliers
• positionlockfacilitateseasyreplacement of hose clamps
• pliersincludeatoothedblockerwith8 positions for opening spring clips or fastening them in a custom position
• heavyduty,two-componenthandle• madeinEurope(Slovenia)
NEW PRODUCT!EXCELLENT VALUE!
Hand tools
UNIOR 622629• containsdeepsockets,1/4”drive,6pointinsizes4,5,6,7,8,9,10,12and13mmonsocketrail
• socketsdropforgedandhardened/tempered across the entire length
• formanualuseonly(nonimpact)• individualsocketsavailableforreplacements
$48.00NEW SET!
9 PIECE 1/4” DRIVE DEEP SOCKET SET 4 - 13 MM, SINGLE HEX, ON RAIL
EXCELLENT VALUE!
LIMITED STOCK! $111.00NEW SET!
Hand tools
UNIOR 619793-619802 SP SET• swivellingsocketswithuni-joint,short,12point• sizesincludedare10-19mm(10pieces)• suppliedonsocketrail• foruseindifficulttoreachspots• forusewithhandtools(nonimpact)only• individualsocketsavailablewhilestockslast
10 PIECE 3/8” DR SOCKET SET WITH UNI-JOINT, 12 POINTS, ON RAIL
OUTSTANDING VALUE!
LIMITED STOCK! $99.50
Hand tools UNIOR 618917• factorycalibratedto+/-4%• fortighteningwheelsonallcarsthatrequire
tightening to 110 Nm (check manufacturer’s specs)• especiallyhandytokeepincarforon-roadwheelchange• canberecalibrated(intervalis12monthsor5000cycles,whatevercomesfirst)
• 400mmlong,1.3kginweight• mustnotbeusedforundoingboltsand
only be used in direction shown on wrench• mustnottightenboltsfurtherwhentorque
is reached to avoid damage to handle• furthertorquesizesforcarsandtrucksavailableonrequest
PRE-SET, CALIBRATED TORQUE HANDLE 110 NM FOR CARS
HANDY!
Hand tools
3/4” DRIVE REVERSIBLE RATCHET, 500 MM LONG UNIOR 602737
• 24teeth• bodydropforged,entirelyhardenedandtempered• excellentprice:qualityratio• sparepartkitforratchetavailable NEW PRODUCT!
EXCELLENT VALUE! $296.00
UNIORhasbeenproducinghandtoolsinSlovenia/Europefor100years.Throughpartialownershipofthesteelplantsupplyingthesteelforitsproducts,itsowndropforgingplantandconstantinvestmentsinitsproductionandqualitycontrol,UNIORensuresthatitsproductsareamongstthebestinEurope,withanexcellentprice:qualityratio.UNIORisISO9001and14001certified.
GREAT VALUE!
BEST SELLER!
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
HAZET 810/6• setwithmostcommonsizesflat
and Phillips screwdrivers• tiptypeandsizemarkedon
handle for easy identification• mattchrome-platedblade,burnishedtips,
softgrip handle with hanging hole• includes4flatscrewdrivers(0.5x3x80,0.8x4x100,1x5.5x125,1.2x6.5x150mm)and2Phillips(PH1x80,PH2x100mm)
• allsizesalsoavailableindividuallyforreplacements
$55.50
6 PIECE SCREWDRIVER SET FOR SLOTTED AND PHILLIPS SCREWS
GREAT VALUE!
$68.00
HAZET 2105LG/9H• extralongdesign• withballendtoaccessscrewsatanangle• holderwith‘150YearHAZETAnniversary’logo• sizesincluded1.5,2,2.5,3,4,5,6,8,10mm• madeinGermany• allsizesalsoavailableindividuallyforreplacements
9 PIECE LONG HEX KEY SET, WITH BALL END, 1.5 - 10 MM
GREAT VALUE!
Hand tools
SELF ADJUSTING MULTIGRIPS, 240 MMUNIOR 611780
• withself-adjustingjaws-pliersadapt perfectly to the work piece withoutpre-settingthejawopening
• canbeusedwithonehand• maximumjawopening40mm• jawscanbelockedforeasier
storage and transportation• entirelydropforged,hardened
and tempered body• workingsurfacesinductionhardened• softgriphandles• madeinEurope(Slovenia)• alsoavailablein300mmlengthoutsidepromotion
NEW PRODUCT! GREAT VALUE! $69.50Hand tools
INSULATED MULTIGRIPS VDE, 240 MMUNIOR 619199
• doublelayeredinsulatedhandles,eachlayer has different colour for additional safety-appearanceofsecondlayer/colour is additional warning sign that pliers need to be replaced
• insulationtestedto10,000volts• jawapertureadjustableto7positions
• bulgeonhandlepreventsfingerstobesqueezedaccidentally
• madeinEurope(Slovenia)
NEW PRODUCT! GREAT VALUE! $53.00Hand tools
UNIVERSAL GRIP PLIERS, 250 MMUNIOR 605206
• jawsmadefromspecialtoolsteel,dropforged and entirely hardened and tempered
• handlesmadefromsheetmetal• surfacenickelplated• symmetricjaws• madeinEurope(Slovenia)• alsoavailableinothersizes(175,300mm)outsidepromotion
NEW PRODUCT! GREAT VALUE! $54.00Hand tools
3 PIECE ELECTRONIC PLIERS SETUNIOR 620963
• containscombinationpliers(120mm), sidecutters(115mm)andlongnosepliers(135mm)
• forelectronicandfinemechanicalwork• inductionhardenedcuttingedges• cuttingcapacity1.5mmmediumwire• twocomponenthandle,withspringopening
GREAT VALUE! $116.00NEW SET!
Hand tools
3/4” DRIVE AIR IMPACT WRENCH - POWERFUL WITH 3250 NM UNDOING AND 2034 NM TIGHTENING TORQUEUNIOR 627571
• extremelypowerfulwithupto2034NMtighteningandupto3250NMundoingtorque(exactvaluesdependingonairsupplysetup)
• overalllengthincludinganvil220mm,weight3.44kg• onehandforward/reverse
switch at back of housing• compositemotorhousing• twinhammermechanism• variablespeedtrigger• freespeed5500rpms• airconsumption198l/min, recommendedairpressure6.2bar
• noiselevel903dB(A)• sparepartsavailable
NEW PRODUCT! GREAT VALUE! $799.00BESTSELLER! POWERFUL!
HAZET 4550-2 • open12pointsocketwrench• forscrewconnectionsoninjectionlines• forMBM352A,346/355A,40,402/422LA403,407HaswellasfordipstickguidetubeonM314
• perfect fit for the front high pressure fuel line nut on the fuel pump on Detroit diesel engines DD13, DD15, OM471, OM472 and OM473
19 MM, 119 MM LONG
$167.50
MUST HAVE!
1/2” DRIVE INJECTION LINE WRENCH,
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
1/2” DRIVE WHEEL BEARING HOUSING SPREADING TOOL
• forexpandingthespringstrutandballjointmounting(separatingthe spring strut from the wheel bearing housing)
• drivewithballrace
HAZET 4912-3• tip6x8mm• forBMW,Mini
$26.50
NEW SIZE!
NEW SIZE!
HAZET 4912-4• tip7.8x11mm• fore.g.MBSprinterType910withfrontwheeldrivesince2018
$30.50
HAZET 4912-2• tip5x7mm• forRenault,Peugeot,Citroen
$25.00
HAZET 4912-1• tip5.5x8mm• forVWFox>05,Polo>02,NewBeetle, Golf98-04,Tiguan>08,EOS>06,Passat>06,Touran>03,Caddy>04,T5>04;AudiA2>01,A3>04,A401-08,A5>08,A6>08TT>07
$25.00
HAZET 3420-1
$18.50
SOCKET WITH 14 MM HEX DRIVE FOR PLASTIC OIL DRAIN PLUGS
• perfectlydesignedforplasticoildrainplugs• preventsdamageresultingfromtheuseof
unsuitable extraction tools such as pliers• with14mmhexdrive• length32mm• foruseone.g.CITROEN(C4,C5,Spacetourer,Jumpy,DS4,DS5with2.0BlueHDIenginesince09.13),FORD(Mondeo,S-Max,Kuga,Galaxy,Focus,C-Maxwith2.0TDCienginesince09.14),PEUGEOT(308,508,3008,5008,Expert,Travellerwith2.0BlueHDIenginesince11.13),TOYOTA(ProaceVerso,Bus,BoxPlatformwith2.0Denginesince02.16),OPEL/VAUXHALL(GrandlandX2.0Dsince10.17)
• madeinGermany
NEW PRODUCT!MUST HAVE!
$159.00
HAZET 900SZ/4• idealsetfordriveshaftsandcardanshafts• contains4impactsockets12pointinsizes24,30,32and36mm
• 24mmforuseone.g.VWTouranfrom06andPassatC
• 30mmforuseone.g.VWGolf4,PoloandNewBeetle,AudiTT1.8,SkodaOctavia,Superb,Fabia
• 32mmforuseone.g.VWTouaregfrom03• 36mmforuseone.g.BMW3,5and7series, Z3,M3;VWPolosince01,GolfPlus1.8TDIfrom05,SeatIbizafrom02
• madeinGermany• allsocketsalsoavailable
individually for replacements
4 PIECE 1/2” DRIVE IMPACT SOCKET SET 24, 30, 32 AND 36 MM
BONUS
BEST SELLER!
$399.00
HAZET 600LG/10• wrenchesareatleast25%longerthanstandardwrenches600N
• heavy-dutydesign-capacity2.0-2.5timesoverGermanIndustry Standard (DIN)
• upto47%morepowerthanwithstandard wrenches600N
• slimdesign,shankwithdoubleT-profile• idealforlow-sittingscrewconnections• setincludessizes10mm(210mmlong), 11mm(220mm),12mm(230mm), 13mm(245mm),14mm(255mm),15mm(270mm), 16mm(290mm),17mm(305mm), 18mm(320mm)and19mm(335mm)
• madeinGermany• allsizesalsoavailableindividually forreplacements,furthersizesalso available (outside promo)
10 PIECE EXTRA-LONG COMBINATION WRENCH SET, 10 - 19 MM
BONUS
NEW SET!
NEW ITEM! GREAT IDEA!
3/4” DRIVE SLOGGING WRENCH 12 POINT (24, 26, 27 MM) AND TORX (E18, E20, E24) FOR BRAKE CALLIPER SCREWS ON COMMERCIAL VEHICLES
• sloggingwrenchwith2strikingfaces• forlooseningandtighteningbrakecalliperscrewconnections
on front and trailing axles of commercial vehicles• availablewithboxend12pointorfemaleTorxopening(seebelow)• useofthewrenchrendersdisassemblyof
the steering tie lever unnecessary• canalsobeusedwitha3/4”drivetorquewrenchinsertedinto3/4”drivesquareopeningonwrenchandtightening in line with manufacturer’s specs
• formulaforcalculatingthecorrecteffectivelengthforusewithtorquewrenchlaser-engravedonwrench
• Torxsizesforuseone.g.MANTGL,TGM• madeinGermany
HAZET 2872-E18• TorxsizeE18,120mmeffectivelength, 30mmheadwidth,12mmheadthickness
$134.00
HAZET 2872-E20• TorxsizeE20,120mmeffectivelength, 32mmheadwidth,12mmheadthickness
$134.00
HAZET 2872-E24• TorxsizeE24,120mmeffectivelength, 38mmheadwidth,12mmheadthickness
$134.00
HAZET 2872SZ-24• 12pointboxend24mm• forSAFbrakecalliperscrews,MBAtegoandActros
$127.50
HAZET 2872SZ-26• 12pointboxend26mm• forDAFXF95/XF105
$127.50
HAZET 2872SZ-27• 12pointboxend27mm• forMBAtego,Actros,Kaessbohrerbuses
$127.50
oil drain plug not included
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
• basedonnewsupercapacitortechnology• nointernalbattery,thustotally
maintenance-free• easyandstraightforwardusage• servicelifeof10years,
1millioncycles• switchablefrom12to24V• oneofthemostpowerfuljumpstartersonthe
market,capableofstartinganycar,4WD,truck,busorotherpetrolordieselengine
• maximumcontinuouscrankingcapacityof4,000amps(12V)and3,400(24V),shortcircuitorpeakcurrentof18,000amps(12V)and9,000amps(24V)respectively
• superfastchargingwithinabout10-120secondsfrom battery or alternatoronrunningvehicle(12Vor24V)orstand-alonebattery
• mostofthetime,canalsobechargedfromthe remaining power in an otherwise empty battery,allowingself-startingofvehicle
• alsopossibletochargefrommainswithsupplied smart charger (takes longer)
• systemshuts-offwhenjumpstarterfully charged (no overcharging)
• handy,solidlybuiltABStrolleywithextendable handle and large wheels
• built-insafetyfuseandsparefuse,built-inshort-circuitbreaker
• dedicatedholdersforclampsand cable reels on trolley
• totalweightofonly17kg,allowing lifting and positioning of trolley onto vehicle engine
• reversepolaritybuzzer,avoidingdamage due to wrong terminal connections
• heavydutypurebrassclamps,thick coppercables(50mm²),190cmlong
• digitaldisplaywithvoltageindicatorandtestbutton• madeinSwitzerlandfromhighestquality
parts by one of the biggest manufacturersofjumpstarters
NEW ITEM!
VIGOR V6202• superflatsocketsandspecialinsertratchet
for working in very tight spaces• socketsincombinationwithspecialratchetonlyrequire
abouthalftheheightofnormalsockets/ratchet• socketswithoutchamferededgesfordirectattachmenttothenut/screwconnection
• robust,solidreversibleratchetinsteelforleftandrighthandoperation• ergonomicratchethandle• socketscanalsobeusedwithastandard3/8”
drive ratchet or handle (not included)• setincludes-reversibleratchet-squareadapter-uni-joint-2extensions(785and150mm)-13superflatsockets,6point,from8to 22mm(allsizes)
• suppliedinpracticalcase• allitemsalso
available individually for replacements
18 PIECE 3/8” DRIVE SOCKET SET, SUPER FLAT
$259.00MUST HAVE!
ELO 188-26M• metricblades0.03,0.04,0.05,0.06....to0.1mm,0.15,0.2,0.25,0.3,0.35....to1.0mm
$26.50
ELO 188-26Z• imperialblades0.0015”,0.002”,0.0025”,0.003”,0.004”,0.005”,0.006”...to0.025”
$26.50
VIGOR V5930• 17mmsocket,150mmlong
$65.00
VIGOR V5931• 19mmsocket,150mmlong
$65.00
1/2” DRIVE IMPACT SOCKET 17 AND 19 MM FOR WHEEL NUTS, EXTRA-LONG (150 MM)
• fordamagefreelooseningandtighteningofwheelbolts• withrotatingplasticsleeve• extra-longforlow-layingnuts (150mminsteadofstandard86mm)
NEW PRODUCT! GREAT VALUE!
BATTERY-LESS, HEAVY-DUTY JUMP STARTER TROLLEY FOR 12 AND 24V ENGINES
LEM C3-TR-12/24V
$2300.00MAINTENANCE FREE!
GREAT PRODUCT!
26 PIECE FEELER GAUGE SET
• tapered,polished,springsteelblades,bladelength100mm
GREAT VALUE!
GREAT VALUE!
height with standard ratchet (ratchet not incl.)
height with extra flat ratchet and socket (included)
standard socket length
extra-long socket length
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
MAINTENANCE FREE!
GREAT PRODUCT!
PROFESSIONAL, BATTERY-LESS JUMP STARTER FOR 12V ENGINESLEM C3-12V
• sametechnologyas12/24Vjumpstarteronleft• contains18capacitorsof600Farradeach-morepowerfulthanmostjumpstartersbasedonsametechnology
• 8,000ampspeakcurrent,maximumcontinuouscrankingcapacityof1,400amps
• suitableforallpetrolenginesupto6litresanddieselenginesupto3.5litres
• totallymaintenance-free(nointernalbatterythatneedsregularreplacing)
• servicelifeof10years,1millioncycles• superfastcharging from running engine on another
vehicle or standalone battery within 10-120seconds• oftenremainingpowerinotherwiseflatbatteryissufficienttorechargejumpstarterwhichthen canjumpstartthesamevehicle
• alsosuppliedwithfullyautomatic smart charger for chargingfrom220Vpowersocket(takeslonger)
• systemshuts-offwhenjumpstarterfullycharged-noovercharging• heavy-dutybrassclamps,thick(25mm²)coppercables108cmlong• safety-fuse,short-circuitbreaker,on/offswitch• digitaldisplay• reversepolaritybuzzer,avoidingdamagedue
to wrong terminal connections • dedicatedholdersforclampsonunit• weightonly5kg• strongABScasing• madeinSwitzerlandfromhighestqualityparts
NEW PRODUCT! $898.00
$111.00
• mostpopularsetinchrome-platedversion• includessizes1.5,2,2.5,3,4,5,6,8and10mm• withpracticalplasticclip• perfectdimensionalaccuracyandhardandtough
special alloy generate the best hex keys on the market• lengthsfrom80(1.5mm)to220mm(10mmsize)• eachkeywithserialnumberfortotalquality
control from raw material to finished product• lifetimewarrantyexcludingwear
and tear and improper usage• madeinSwitzerland• allhexkeysalsoavailableindividually forreplacements-colouredsetalso available outside promotion
9 PIECE METRIC HEX KEY SET, LONG, WITH BALL POINT, 1.5 TO 10 MM
PB 212.LH-10
BEST SELLER!
• mostpopularsetinimperialsizes• perfectdimensionalaccuracyandhard
and tough special alloy generate the best hex keys on the market
• sizesincluded1/20”,1/16”,5/64”,3/32”,7/64”,1/8”,9/64”,5/32”,3/16”,7/32”,1/4”and5/16”
• suppliedinpracticalclip• lifetimewarrantyexcludingwear
and tear and improper usage• madeinSwitzerland• allhexkeysalsoavailableindividuallyforreplacements-colouredsetalsoavailable outside promotion
12 PIECE IMPERIAL HEX KEY SET, LONG, WITH BALL POINT, 1/20 - 5/16”
PB 212Z.LH-12
$139.00BEST SELLER!
• 50mmlong,colour-codedbits(eachbit type has its own colour)
• bitsendwithretaininggrooveforuse in electric drill (power bits)
• suppliedwith3plasticbitholders(can be taken out) in plastic box
• includes4flatbits(0.6x4,0.8x5.5,1x6.25,1.2x6mm),3Phillips(PH#1,#2,#3),3Pozi(PZ#1,#2,#3),5in-hex(2.5,3,4,5,6mm)and15Torx(T9,T10x2,T15x2,T20x3,T25x3,T27,T30x2,T40)
• madeinSwitzerland• allitemsalsoavailableindividually
for replacements
30 PIECE 1/4” HEX DRIVE SCREWDRIVER BIT SET, 50 MM LONG
PB E6.990
$179.00
• foreasyuncouplingofradiatorand other hoses from their sockets
• hookenddifferentoneachtool(referpicture)• 6mmdiablade,bladelength90and100mmrespectively• plastichandle• eachtoolwithserialnumberfortotalquality
control from raw material to finished product• lifetimewarrantyexcludingwearand
tear and improper usage• madeinSwitzerland• eachtoolalsoavailableindividually
2 PIECE HOSE PLUCKER SETPB 7674.CN
$49.50• setcontainsthemostpopularsizesinflatandPhillips screwdrivers
• ergonomic,two-componentsoftgriphandle‘SwissGrip’
• handlecapwithcolour,sizeandtip symbol for easy identification
• includes5flatscrewdrivers(0.5x3.5x90,0.6x4x100,0.8x5.5x120,1x6.5x140,1.2x8x160)and 2Phillips(PH#1x80mm,PH#2x100mm)
• lifetimewarrantyexcludingwearand tear and improper usage
• entirelymadeinSwitzerland• allscrewdriversalsoavailable
individually for replacements
7 PIECE SCREWDRIVER SET WITH SOFT GRIP HANDLES FOR FLAT AND PHILLIPS SCREWSPB 8250.CN
BEST SELLER!GREAT VALUE! $99.50
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
• non-reboundinghammerforfull,precisestrikes• replaceablealuminiumheads(withspringpin),32mmdiameter,flat
• replaceablehickorywoodhandle• spareheadsalsoavailableincopper,i.e.
possible to set up hammer with one side aluminium and other copper head
• madeinSwitzerland• eachtoolwithserialnumberfortotalquality
control from raw material to finished product• lifetimewarranty,excludingwear
and tear and improper usage• hammeralsoavailablewith24and40mmheadsand/orwithcopperheads(outsidepromotion)
DEAD BLOW HAMMER, 600 G, WITH REPLACEABLE ALUMINIUM HEADS 32 MMPB 306.32 AL
$99.50NEW PRODUCT!
• pinpuncheswithpronouncedelasticityandahigh degree of hardness thanks to special alloy steelandexactheattreatmentbyPBSwissTools
• octagonalbodybetween8and12mmindiameter
• setcontainssizes2,3,4,5,6and7mm,progressinginlengthsfrom115to180mm
• suppliedinplasticholder• madeinSwitzerland• alltoolswithserialnumberfortotalquality
control from raw material to finished product• lifetimewarranty,excludingwear
and tear and improper usage• allpunchesinsetandfurthersizes
also available individually
6 PIECE PARALLEL PIN PUNCH SETPB 750.BL
$93.50GREAT SET!
$149.00GREAT SET!
•T-handlehexkeywithsoftgriphandle‘SwissGrip®’•with hanging hole in handle• includessizes4,5,6,8and10mm•blades150mmlong,exceptsize10mm=200mm
long, additional blade on side of handle•allbladeslaser-engravedwithsizeandserialnumberforqualitycontrol•madeinSwitzerland•also available with a ball end (outside promotion)
5 PIECE T-HANDLE HEX KEY SET, 4-10 MM, LONG, STRAIGHT-END
PB 1207.4-10 SP SET • rechargeablethroughUSBconnection• fittedwithnewCOBLEDstriplightprovidinga
powerful and completely uniform illumination which is ideal for a worklight
• highpowertoplight(flashlight)• strongmagnetatbase• headcanbetilted180ºfor
lighting at any angle• mainlight:80lumen/100lux,2.5hoursoperatingtime
• spotlight:50lumen/340lux,2.5hoursoperatingtime
• 3.7V/750mAhLi-ionrechargeablebattery, 3 hours charging time
• temperaturerange-10ºto+40ºC• weight100g• dimensions:164mmx47mmx31mm• suppliedwithUBSchargingcable,mainsadapternotincluded• designedinDenmark-5yearwarranty
(conditions apply, such as regular recharging before battery isdepleted,useofcorrectcables/plugs,etc.) $74.005 YEAR WARRANTY!GREAT PRODUCT!
SMALL, FLEXIBLE AND RECHARGEABLE WORK LIGHT AND TORCHHELLA UNIPEN
USBCHARGING
• PB’smostcomprehensivesetinits most compact form
• softgriphandleandinterchangeablebladesforlargesizesandhardtelescopichandleandinterchangeablebladesforsmallsizes
• separatetoolkitforsmallsizesisclipped into larger roll pouch
• coversthemostusedsizesinslotted(7x), Phillips(4x),Pozi(3x),Hex(7x)andTorx(8x), alsoincludedawlandvoltagetesterand2handles, one for small and one for large blades
• madeinSwitzerland• allitemsalsoavailableindividually
for replacements
25 PIECE SCREWDRIVER SET WITH INTERCHANGEABLE BLADES
PB 8515
• setwith6interchangeablebladesandtelescopic handle with turnable cap
• practicalsetforsmallworkinelectronics, mechanics, optics, etc.
• bladelengthcanbeadjustedbymovingblades in and out of the handle
• eachblade120mmlongwithdouble-endedtips:Phillips/slotted,Hex/HexandTorx/Torx
• bladesincluded:PH00/0.3x2.0mmslotted,PH0/0.4x2.5mmslotted,Hex1.5/2.0mm,2.5/3.0mm,TorxT6/T7,T8/T9
• suppliedinpracticalrollpouch• madeinSwitzerland• allpartsalsoavailableindividuallyforreplacements
7 PIECE SMALL SCREWDRIVER SET WITH INTERCHANGEABLE BLADES IN ROLL POUCHPB513
$314.50
$84.00
GREAT SET!
HANDY!
164
mm
hex key set with sizes 0.71 - 2.0 mm
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
TWIST DRILL SET, HSS COBALT 5, IN 0.5 MM INCREMENTS
• 5%CobaltalloyedandgroundHSSdrills, with increased heat resistance comparedtonormalHSSdrills
• pointangle130º,fromØ3mmupwards with split point
• idealdrillfordrillinghigh-strengthstainless,acidandheat-resistantsteel(lessthan1100N/mm2)
• in0.5mmincrements,suppliedinlight-weightplasticbox
• replacementdrillsavailableindividually(RUKO2155xxx)
MUST HAVE!GREAT VALUE!
6 PIECE TAPER AND DEBURRING COUNTERSINK SET ‘ULTIMATECUT’, HIGH SPEED STEEL
• highwearresistancethankstorevolutionary flute geometry
• considerablylessfeedforcerequired• upto60%longerservicelife,upto30%fastercountersinking
• extremelyquietrunning• optimalandsmoothsurface• perfectchipremoval• 3surfaceshankpreventsslippinginchuck• achievesthebestperformanceinalmostall
materials and applications• setcontainstypeC90º (DIN335)countersinksin sizes6.3,8.3,10.4,12.4,16.5and20.5mm
• suppliedinlightweightplasticcase
RUKO 102790RO
GREAT QUALITY! $175.00
standard countersink
UltimateCutcountersink
WATCH VIDEO
NEW PRODUCT!
MADE IN GERMANY! MADE IN GERMANY!
3 PIECE TUNGSTEN-CARBIDE ROTARY BURR SET IN MINI BOX
• fordeburring,breakingofedges,trimming, processing welding seams, surface processing, etc.
• high-performancetungsten-carbide rotary burrs with cross-toothing(highercutting capacity than simple toothing)forhigh-alloysteels,stainlesssteel,heat-resistantsteels, die cast and plastics
• setcontains3rotaryburrswith10mmdia., supplied in practical plastic case with foam
• allitemsalsoavailableindividuallyfor replacements
RUKO 116001
$89.50
GREAT VALUE!
RUKO 241100• size0,125mmlong-fortapsM1-M8,Whitworth(BSW)1/16-5/16
$11.00
RUKO 241102• size2,265mmlong-fortapsM4-M12,BSW3/16-5/8,BSP1/8-3/8
$22.00
RUKO 241103• size3,370mmlong-fortapsM5-M20,BSW1/4-3/4,BSP1/8-1/2
$42.00
ADJUSTABLE TAP WRENCH
• idealforthreadcuttingininaccessibleplaces• hardenedtwojawchuckfortensioningsquareshanks• 2steelhandles,oneofwhichcanbeunscrewed• availablein3differentsizes(seebelow), furthersizesavailableoutsidepromotion
GREAT VALUE!
$99.50$199.50
RUKO 215214RO -1-10mm(19pieces)
RUKO 215215RO -1-13mm(25pieces)
RAPID DEBURRER WITH HSS BLADE
• forinternalandexternaldeburringworkonlong-chippingmaterialssuchas steel, aluminium, plastic, etc.
• hexagonaluminiumhandle• non-exchangeableblade• pocketsize,withclip
RUKO 107052
$9.50GREAT VALUE!
TUBE DEBURRER WITH HSS CUTTING EDGES
• suitableforinternalandexternaltubedeburring• fortubediameters4to36mm
RUKO 107053
$18.50HANDY!
SIDE CUTTERS WITH 21 º ANGLEDCUTTING EDGES, FULL FLUSH-CUT
• lap-jointwithspring• tight-fitjointmovement• heat-treatedto54-56ºHRC• perfectlyalignedandrectifiedcuttingedges• idealforcuttingcabletieswithoutsharpends• openingspringforfatigue-freeworking• lightweight(64g)• overalllength128mm,cuttingedges8mmlong• 2componenthandle• cuttingcapacity1.3mmsoftwire• madeinGermany
NWS 2200-128
$35.50EXCELLENT VALUE!
128 mm
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
AVAILABLEFROM:
ThisbrochureispublishedbyOzSwissEuropeanTools,ABN69492017797,Tel.0298079322,Fax0298079344,Webwww.europeantools.com. au. All prices in this brochure are suggested promotional prices that include GST when sold in Australia and exclude GST when sold in NZ. Prices are valid till 30 September 19, after that only while stocks last and without any bonus item. There is no obligation for resellers to adhere to these prices.
OzSwissEuropeanToolswilldoallthingsnecessarytomaintainstocksofproductsadvertisedbutcannotbemaderesponsiblefortheunavailabilityofsuchproductsasaconsequenceofthefailureofsupplierstodeliveratallorontimeorthroughanyothercircumstancesbeyondthecontrolofOzSwissEuropeanTools.Limitedstockitemsonlyavailablewhilestocklasts.E.&O.E.,copyrightwithOzSwissEuropeanTools.Reproductioninwholeorpartisprohibitedwithoutwritten prior approval.
• setcontainsthebasic2armpullersthatarerequiredin every workshop
• withstandardandextrathin,trapezeshapedpullerhookswith chamfered corners for extra narrow spaces
• forpullingofftransmissionsgears, bearings, pinions, synchronizerbodies,etc.
• byturningthepullinghooks around, the pullers can be used both internally and externally
• upto4differentpullercombinationspossible (refer table)
• maxpullingload4,5twithstandardand2.5twithextrathinpullinghooks
• thankstoincluded100mmextensions,pullingdepthcanbeextendedfrom100to200mmforboth, standard and extra thin, narrow hooks
• maxpullingwidth90mm• hooksstayparallel,evenunderafullload• alsosuitableforpullingoff
asymmetrical work pieces• theparttobepulledliesonlyon
the support surfaces of the pulling hooks and is pulled off gently
• theQuickAdjustredknobensuresfast,trouble-freeadjustment-thepullinghookscan be loosened and moved along the cross bar without the need for a wrench
• cross-barwithhexprofile,allowinguse of a wrench for counterholding when needed
• spindleheadwithbandthatpreventsthewrenchfrom slipping off during the pulling process
• suppliedinKukkoL-boxsystemboxwithfoam• allpartsalsoavailableseparately(legsonlyinpairs)
for replacements $357.00
7 PIECE 2 ARM PULLER SET WITH STANDARD AND EXTRA THIN HOOKS, FOR UP TO 4 PULLER COMBINATIONS - UP TO 90 MM IN WIDTH AND 200 MM IN DEPTHKUKKO K-20-1+S-T
LIMITED STOCK!!GREAT SET!
• screwplugsareinsertedintotaphole and then extracted with sharp blows with the slide hammer
• threadedpinsinscrewplugscanbeunscrewedandreplacedseparately-alsoallows usage of adapters without pins with other tools with same outside thread
• canalsobeusedtoextractdowel-pins,parallel-keys,bolts,etc.• setcontains
-6screwplugs(M3,M4,M5,M6,M8,M10)withreplaceable pins for use with slide hammer -3zinc-platedadaptersM7/M12,M10/M12,15-16G/M12foruseofslidehammerwithinternalextractorsKukko21series(notincluded) and other tools with respective outside thread-slidehammer430g,270mmlongwithM12connection-suppliedinplasticcasewithfoam
• madeinGermany• allitemsavailableindividually
for replacements $383.50
10 PIECE SLIDE HAMMER SET FOR EXTRACTING BUSHINGS AND THREADED ITEMSKUKKO KS-22-01
GREAT SET!
• for manual cleaning and deburring of bores, tubes, etc.
•brushes with loop•overall length 300 mm, section
with bristles 100 mm• includesdia4,6,8,10and12mm•supplied in clear plastic pouch•brushes made in Germany•allbrushesandfurthersizesalsoavailable
individually, also available in other materials
5 PIECE CYLINDER BRUSH SET WITH BRASS BRISTLES
$69.00
LES 542.701-704/740 SP
3 PIECE BRAKE CALLIPER BRUSH SET - STEEL, STAINLESS STEEL AND BRASS
$48.00
•designed for use in automotive industry for mainly cleaning brake pads but can also be used for other cleaning tasks
•slim brush with heavy straight wire filling• two component ergonomical handle•2x13rows,steel0.35mm,stainlesssteel0.35mm,brass0.25mmwire
•brushlength225mm,thickness12mm
LES 182 SP
MADE IN GERMANY!
GREAT VALUE!BEST SELLER!
OUTSTANDING VALUE!