Speedboat April 2015 Online Edition

Eddie Knox Racing / PROBLEM CHILD Top Fuel Hydro06, 11, 12, 13 World Champion TFH World Record:Speed 262.238mph / ET 3.3

P-74 Crackerbox Pro2014 Lucas Oil World Champion

K-711 Eason & Irlick Racing

Sudden Force Racing Water Ski Team

Tony Scarlata, Team Driver 28X World Champion / Top Alcohol Flat World Record: 5.168 ET

#512 WOT Marine Racing Team

K-69 Freedom Child, Jennings/Rankin Racing. World Champion 2011, 12, 13

Bad Attitude Racing 1st in Class 175 mph at 2014 LOTO

These champions choose NRI.

NickRoseInsurance.com Auto Marine Home Life Commercial HealthMyGaragefacebook Instagram

PHOTO CREDIT: STRYDER PHOTO

Insurance coverage for ALL types of boats.

Nick Rose Insurance(661) 253-1131 (CA)(928) 669-2900 (AZ)

COLUMNS 8 ALEXI SAHAGIAN10 JIM WILKES12 INDUSTRY NEWS60 NEW PRODUCTS

FEATURES14 BLOOD MONEYBoatbuilder Brian Golie got more than he bargained for when he bought his 40' Skaterhe was investing in a piece of racing history.

26 THEN & NOWAs the 2015 offshore racing season heats up, Speedboat invites you to a take a very special trip down memory lane.

34 PERFORMANCE TESTS, PART 2Our second round of 2015 boat evaluations gathers formidable models from Caliber 1, Cobra, Essex, Nordic and Skater.

54 THE BATTERY BOOSTEROur tech crew tests the Battery Saver, an apparatus designed to charge, maintain and enhance the life of your boats battery.

speedboat.com 4 S P E E D B O A T | March 2015

TABLE OF CONTENTSMarch 2015

04-05_SB_TOC.indd 404-05_SB_TOC.indd 4 2/3/15 5:26 PM2/3/15 5:26 PM

BRETTS COVE64 ENDLERS GAMEJordan Endlers story marks yet another chapter in the never-ending saga of immaculate boats that were found languishing in a barn.

70 HEAD TURNERScott Turners 1982 19'6" Hallett SS previously graced our swimsuit section. Now she gets her close-up.

74 RAT TRAPLake Havasu resident Rick Escott gets his kicks in a beautiful 1966 Schiada.

78 NO BAIN, NO GAINDeep in the heart of Texas, Eric Bain flexes the muscle of his 1997 Tom Papp Stealth.

Editorial: Speedboat Magazine assumes no responsibility for unsolicited material. All manuscripts, materials, photographs and artwork submitted are at mailers risk and must include self-addressed envelope with proper postage if requested to be returned. All letters sent to Speedboat will be treated as unconditionally assigned for publication and copyright purposes, and are subject to Performance Boats right to edit and comment editorially. All rights reserved. Reprinting in whole or part is expressly forbidden, except by written permission of the publisher.

Postmaster: Send address changes to Postmaster: Send address changes to Speedboat Magazine, 9216 Bally Court, Rancho Cucamonga, CA 91730.

Cover photo by Todd Taylor

Speedboat.com

To find your nearest location to purchase a copy of Speedboat Magazine go to:

www.WheresMyMagazine.com

Published by DCO Enterprises, LLC

Publishers Ray Lee [email protected] Chris Davidson [email protected]

Editor Brett Bayne [email protected] Senior Tech Editors Jim Wilkes [email protected]

Alexi Sahagian [email protected] Tech Editors Greg Shoemaker Jim Wilkes Valerie Collins

National Sales Kerri Trapani Director [email protected]

Art Director Gail Hada-Insley

Helicopter Services Fred Young [email protected] Photographers Todd Taylor, Jay Nichols Randy Nuzzo, Kenny Dunlop, Stu Jones, Jeff Girardi, Andrew Gates

Operations Manager Michele Plummer [email protected]

Subscriptions [email protected]

Webmaster Craig Lathrop [email protected]

Web Design Element Media Design

Editorial Offices 9216 Bally Court Rancho Cucamonga, CA 91730 (888) 577-2628 (BOAT)

SPEEDBOAT MAGAZINE (ISSN#1941-9473) is published 8 times a year by DCO Enterprises LLC.

SUBSCRIPTIONS: Domestic $34.00 for 8 issues, Canada $56.00 for 8 issues, International $60.00 for 8 issues. All prices are for one year and in US funds. For subscription info: call (888) 577-2628.

PRINTED IN USA These rates represent Speedboats standard sub-scription rate and should not be confused with any special rates or premi-ums otherwise advertised or offered.

speedboat.com S P E E D B O A T | March 2015 5

04-05_SB_TOC.indd 504-05_SB_TOC.indd 5 2/3/15 5:27 PM2/3/15 5:27 PM

07,09,11,19,23,25,33,55,5981,84_newADS.indd 607,09,11,19,23,25,33,55,5981,84_newADS.indd 6 2/3/15 5:36 PM2/3/15 5:36 PM


ON THE DYNOALEXI SAHAGIANSetting Timing on EFIDear Alexi:I have a 502 MerCruiser engine. I exchanged the distributor for a nice billet one. Now that its done, my friend helped me install it. However, we seem to have a reduction in performance and idle quality, and the engine just does not seem right. We tried to set the timing, but it was all over the place. Please help, as boating season is coming quick for us and we want to get it back up and running in tip-top condition.Gene ReynoldsSan Pedro, CA

On any computer-controlled EFI engine with a distributor, you must fol-low the manufacturers specifications on setting the timing. It is a precise opera-tion and requires some special tools. I will attempt to give you the basic process. Usually you set the engine so it is on the compression stroke (approximately 16 degrees) before top dead center com-pression stroke. Then mark your old dis-tributor and replace the new one to the exact spot the old one was in. If not, and you already took the old one out with-out marking it, you will need to find 16 degrees BTDC (before top dead center compression) and set up the number-one distributor cap pin on the rotor to the cap. Keep in mind that you must make sure where you install the housing will clear things, as you will need to plug in the two weather pack plugs in the wire harness.

Once you set it in and install the plug wires back in the standard 1.8.4.3.6.5.7.2. firing order. Then you must get a MerCruiser scan tool or timing plug to be able to put the ECU in timing mode once the engine starts and is warm. This is a must!

Once you start the engine in a safe place (perhaps with a professional assist-ing you), simply warm the engine up a bit, put the engine in timing mode and follow the base timing specs they pro-vided on the placard or manual on that serial numbered engine. (It is usually 6-8 degree at idle.) Once youre finished, make sure you put the engine back in

normal mode. This is a mistake folks often make and the engine does not run well. You will hear the idle rpm change to normal and I always recommend dis-connecting any electronic scan tools, shutting the motor off and do a restart to be assured it took! Once you follow the manufacturers spec, you should be back to normal or better. I hope this gives you a good reference and remember to verify the procedure with the specific manufacturer.

Valvetrain StabilityDear Alexi:I purchased a single-engine boat with a dyno-tested 500-hp engine in it. It runs well, but it seems to be down on power and pop once in a while. The previous owner said I needed to have the valves adjusted and that it had a solid cam. Would that really affect the performance this much? Ive only put 25 hours on it.Roger McIntoshSan Pedro, CA

Valve adjustments are critical in a marine engine, as they run seats with-in the heads, and other parts wear in changing clearances quite a bit. This is why hydraulic camshafts/lifters were

designed to follow these very changes; however, they can be limited to rpm and cam lift size. The short answer is yes, you need to fol-low his instructions and set the cold/warm lash on the rockers, inspect the springs, etc., while youre underway with the process. Take good notes as to what the lash is prior to changing them to the spec. It will let you know how far off from spec it was when he last did it. This may help you pick a sooner time to make the next adjustments. We always mention to folks that every 15-20 hours of hard run time is when we would review them.

The lash spec is usually set by the cam manufacturer, however block and head material and temperature ranges matter a bunch. Try to see who built the 500-hp motor for him and get the details so it stays reliable. I would guess the range is .016 intake and .018 exhaust +-.004. Once adjusted, you will notice a smoother power, restored power and less blow by and weirdness in general.

Good luck with your boat!

08_PB_ALEXI_0315.indd 808_PB_ALEXI_0315.indd 8 2/3/15 5:28 PM2/3/15 5:28 PM


V-DRIVE TECHJIM WILKES

[Continues on page 58]

Balancer vs. Flywheel

Dear Jim:I own a hydro that pushes the nose

down pretty hard on the starboard side when getting into it. Right now its set up so the V-drive is driven off the flywheel so the torque of the motor is spinning that way. How much will torque from the motor upset the boat? If I were to switch it around, how safe is it running the balanc-er? Seems like the crank narrows up quite a bit on that end and would be prone to snapping off.

Thanks for your consideration.Wes FlynnDenver, CO

Turning your engine around to drive off the harmonic balancer is not the answer. Its a big expense and not worth the money to do it. It is safe to do, but you will need to add another keyway on the end of the crankshaft. One keyway is marginal.

Back in the late 1960s at Long Beach Marine Stadium, I would go down to starting line and watch the hydros start. Every driver would turn the steering wheel to the left at the same time they hit the throttle.

Propeller torque is something every V-drive driver feels. Now, how much torque is acceptable? That is the ques-tion. Have you tried a different propel-ler? I would like to know if you have an aluminum plate on the underside of your sponsons. If so, you might want to add some length to the right sponson plate and you can shim the plate down slightly to off set the propeller torque. Try a few different propellers and see if you can decrease the torque.

Controlling Porpoise

Dear Jim:I am a newbie learning to operate

and set up a V-drive. I have no problem doing the trial and error thing to learn to launch a boat. But when it starts to porpoise at 60+ mph, I want to figure out safely how to deal with it. Basically, I know my boat can be set up to not hop around at speed. I just dont know how to do it. For now, I can keep it stable by using what seems to me like a lot of down pedal. About the time she starts to take a set, it starts to porpoise, which Ive read is fairly typical (until time is put in to the setup). Im looking to be able to run around the 90-mph mark without being on the down pedal and plowing with the nose.

I know all this wont happen over-night. For now, my plan is plenty of seat

time. The boat is a 19' Sanger Family Ski with stock 427 BBC (375-400 hp), 10-degree Casale box (with Whirl-Away and 9% gears) and 11 3/8 x 16 prop. The motor is 31" from transom, and the V-drive is 97" from transom. The back of strut barrel is 25" in front of end of plates; the plates stick out 10" off the back of the boat. Any suggestions on how to get this thing to settle down?Carl CharlestonMemphis, TN

Years ago, I built an engine for a cus-tomer, Scott Neils, who had the same 19' Sanger that you have now. We built a 496 that made 685 hp on pump 91 octane gas. Scotts boat ran 95 mph. I dont want to take the wind out of your sails, but I dont think you have enough power to run 90 mph. Now, lets talk about your boats setup. Nine gears in the V-drive is good, but for my liking, I would try a smaller-diameter propeller. A propel-ler size of 11"x16" would help diminish some transom lift.

Your engine placement is great, along with the strut location. Now for your plate adjustment. This is an area that is somewhat different from boat to boat. Your 19' Sanger has a small vee and is not a true flat or runner bot-tom style hull. I dont remember how many strakes your boat has on the bot-tom or how far back they go. Anyway, one problem you might have is that you need to raise the plate where the strakes are so you can help channel the air out the back of the boat and not spill or push it out the sides. This air will help keep the boat from building a wall of water under the boat causing the bounce under acceleration. You will still need to control the plate with your foot override pedal with less foot input. Hope this helps!

10,58_PB_JimWilkes_0315.indd 1010,58_PB_JimWilkes_0315.indd 10 2/3/15 5:30 PM2/3/15 5:30 PM


Industry NewsBRETT BAYNE

Spectre Plans Big Comeback for 2015

Lucas Oil Moving to Parker in April

Spectre Powerboats, the builder of APBA World Champion catamarans that launched in the 1980s, is under new ownership and is poised to stage a major comebackstarting with the 2015 Miami Boat Show.

Chris Ivey, a former endurance car racer, purchased the company from Gary Smith last week. He told Speedboat that his #1 priority is getting the company back up and running, beginning with moving molds from storage to the pro-duction facility in Fort Pierce, FL. In addi-tion to exhibiting a 32' Widebody at the Miami Show, Ivey said Spectre will resume production of the companys 30', 32', 36' and 42' models. He said Spectre would be attending a variety of poker runs, starting with the Tampa Bay Poker Run, held April 16-19 by the Florida Powerboat Club.

We want to let peo-ple know that were out there, and that we plan on provid-ing support for other Spectre owners at the events, Ivey said.

Spectres rebrand-ing and relaunch-ing of its boats will involve getting its website (spectrepow-erboats.com) up and running again after a long period of dormancy.

Second Amendment, a 36' Spectre driven by Karl Steger and throttled by Neil Wobbe, has been an active competi-tor in Superboat Internationals recent offshore races in Production 3 class.

Spectre Powerboats founder Jay Pilini

is currently building a successful line of center console models under the Pilini Marine Technologies name. Based in Clearwater, FL, Pilini offers 24- and 35-versions. In 2014, it was reported that Pilini was at work on a pair of go-fast catamarans, to be available in outboard and stern-drive configurations.

After hosting three drag races in Lake Havasu City that were thwarted by high winds, the Lucas Oil series is moving its April race to Parker, AZ.

Two Twisted Liquidhulls being readied

for the JuniorDragboat Racing

League's exhibitionseason with Lucas Oil.

Wind has been a continual problem on the lake during the races, with com-petitors facing a safety hazard. Parker is better protected from wind, and the

venue will likely result in less prepara-tion time and less wait time for every-body. The Lucas Oil drag boat race will be held April 10-12, in front of Parkers BlueWater Casino, while racing will proceed as scheduled in Lake Havasu on Oct. 2-4

The Parker Race will kick off a new exhibition series for the 2015 season: the Junior Dragboat Racing League, in which kids 10 to 16 will race with pro-fessional racers like Tony Scarlata rid-ing shotgun. The series was pitched to Lucas Oil by Geoff Archer of Twisted Liquid Marine, Lake Havasu City, which will be providing two of their mini-hulls for the races. Based on feedback from the races, its hoped that the series will turn into an official class beginning in 2016, with elapsed-time eight-mile bracket runs.

12_INDUSTRYnews_0315 r1.indd 1212_INDUSTRYnews_0315 r1.indd 12 2/3/15 5:51 PM2/3/15 5:51 PM


Boatbuilder Brian Golie got more than he bargained for when he bought his 40' Skaterhe was investing in a piece of history.

Blood Blood MoneyMoney

Story by Brett Bayne

RESTORATION

14-16,18,20-21,24_resto_FINN_0315.indd 1414-16,18,20-21,24_resto_FINN_0315.indd 14 2/3/15 5:32 PM2/3/15 5:32 PM


When Brian Golie bought his vintage 40-foot Skater, he knew he was acquiring a diamond in the rough. But he never dreamed he was acquiring a piece of history. While doing some repair work on the hull last year, Douglas Marine President Peter Hledin recalls seeing the boat and thinking, Holy st, this is probably the most famous 40' Skater ever made! The boat he was working on turned out to be Finnscrewthe winner of the Offshore World Championships in 1992.

So how did Golie wind up unintentionally owning a now-legendary race boat? Growing up in Orange County, California, Golie is a veteran of boating on and around the Parker Strip and Lake Havasu dating back to the late 1970s during his high-school years. His earliest boats included 18-foot jetboats.

Opposite: Golie and the completed Skater. Left: The original Finnscrew offshore competitor. Below: The boat when Golie took ownership; it was de-rigged soon afterwards.



Blood Money

Heres the concept drawing of the Skaters new paint job, by Visual Imagination.

Golie reworks the dash.

Back then, there was really no such thing as the big boats we see nowadays, he recalls. Or, at least, not too many people had them.

After school, Golie focused on launching his own company (Golden West Biologicals Inc., a manufacturer of human and animal biological products) and got out of the boating scene while concentrating on the business he started out of his moth-ers garage in 1989. Later, when the need for speed returned, his interest shifted to larger boats, finding a playground in Southern Californias Lake Elsinore. I used to do a lot of water skiing there, he says. I used to go out early in the morning and do ski runs before I came to work. When the passion hit hard around 2005, he purchased a 24-foot HTM cat powered by a 565

that delivered triple-digit top speeds. It was around that time that Golie (with Fred Young and Steve

Gurlitz) launched another companythe speedboat builder Innovative Marine Concepts, or IMC. We basically threw our money together and started building boats. It was Fred Young who sent Golie an ad he found online for the 1991 40' Skater. At the time, the boat was painted white and blue, with red and yel-low accents, featuring a classic deck configuration. The boat was purchased from World Champion Offshore Racer Randy Kent of Speed Racer fame, who was handling it as part of an estate sale.

On his first encounter with the boat, Golie saw potential in the boat, and immediately set about de-rigging it with plans to redo the interior and repaint the boat. The 850 engines were removed and sold, then eventually be replaced with 1075s. The drives, which had been rebuilt by a shop, blew apart during one outing. So Golie decided to put the boat in the hands of Vern Gilbert of West Coast Drives (Lake Havasu City, AZ). I wasnt sure if he was interested in doing a complete redo on this boat, Golie says, but I took it to him with the blown-up drives, and he put them all back together and made them like brand new.

Next, the 1075s were removed and sent to Carson Brummett, who did some fine-tuning on themleak-down, pressure, dyno-tuning, etc. He did like $20,000 worth of upgrades to these two motors, Golie says. Among other things, it required replacing various bearings and pulleys that were gone. It just wasnt cool, man, Golie says.

Then another problem reared its ugly head. The first time I took this boat out for a test run, both of the tanks were full of water because they hadnt been plugged up correctly, Golie says. Can you imagine how much power that took away from the boat, having 400 gallons of water in the tanks? We didnt find out about that until after Randy started de-rigging itafter he pulled the back seats out, he looked down and exclaimed, What the hell?


11,17,25,31,33,81_newADS.indd 1711,17,25,31,33,81_newADS.indd 17 12/23/14 4:50 PM12/23/14 4:50 PM

The old engines were removed and these 1075 engines installed into the Skater. The motors, interior, wiring, paintvirtually everything on this boat was redone. Near left: the slogan No Good Deed Goes Unpunished appears between the rear buckets and the engine compartment.

Above: Repairs are made to the boat at the Skater factory.


Blood Money


Above: The boat and trailer both receive a new paint job by Visual Imagination. Above right: drive wizard Vern Gilbert.


Blood Money


The 40' Skaterwith its updatedfacelift.


Both the tanks were full of water!The next thing to be addressed was the white interior. The

upholstery was a problem, Golie says. Everything we touched, bruised. If you put your hand on the upholstery, it turned pur-ple. Thus, the interior needed to be addressed a second time, courtesy of Bill Sturgis at Conquest Boats (Group One Marine).

The boat was named Blood Money, a nod to his firm, which handles blood, plasma and other human-based products.

With the tanks rotted out, Golie and Vern Gilbert hauled the boat to the original manufacturerSkater builder Douglas Marine of Douglas, MIto have them redone and to address

a few other minor problems. On the way, the pair got stuck in a huge snowstorm for several days. When we got to Skater, we put the boat inside because we got there late at night, he says. Everything was perfect on it. When we came back the next day, the bottom and sides had blown out of it. Skaters Peter Hledin recalls making repairs on the boatand of the interesting dis-covery he made:

When he brought the boat back here, it was rather poorly done, Hledin says. The original hull had a pair of F-16 canopies, and even though it had been converted into an open cockpit, the boats history immediately registered with Hledin. I recognized it right off the bat, and when we ground off the paint, there was the yellow and the blue. I said, Holy st. You got probably the most famous 40 Skater ever made. It won the very first World Championship that was held, in Dubai back in 1992.

Indeed, Hledin has photos of the boat, named Finnscrew after the Finnish propeller company that sponsored it in Offshore



L

XL

2XL

3XL

4XL

QTY

L

XL

2XL

3XL

4XL

QTY

Subscribe & Save!Its the fastest way to get your

go-fast fix! One year, 8 issues for $34 delivered to your door.

Best Bargain add a T-shirt for $44.95. Slight extra charge for 2XL and

bigger t-shirt sizes.

*Current subscribers please call 1-888-577-2628 to renew.

speedboat.com and subscribe today!*Cur

spspGo to

go

eedpsp

Use Credit Card securely through www.speedboat.comSpeedboat Magazine: 7121 W. Craig Rd., Ste. 113, Las Vegas, NV 89129Attn: Subscriptions

Call us direct at: 888-577-BOAT (2628)Med-XL $14.95

XXL $16.95

3XL-4XL $17.95Shipping and handling to be calculated at time of purchase.

1-year $34.00 8 issues Canadian rate: $56.00, International rate $60.00 (U.S. Funds)

NAME AGE

ADDRESS

CITY/STATE/ZIP

PHONE NUMBER

EMAIL

FRONT: LEFT CHEST

BACK

BACK

FRONT: LEFT CHEST

FREE Calendar

with paid 1-yea

r subscription


Blood Money

1 class. It was campaigned by Finnish businessman J.P. Mattila and Italian fash-ion icon Walter Ragazzi. The 1992 World Championship event was televised across the planet, giving a real visibility boost to the Finnscrew brand.

Finnscrew was one of a few 40' Skaters built by Hledin around this time; oth-ers included the famous Circus Circus offshore racer (later successfully cam-paigned by Stephen Dorcich at Risky Business in POPBRA-sactioned races on the West Coast, powered by Arneson ASD8 drives) and its competitor, Powerboat Marine Products (powered by twin 1,000-hp Chevy engines and Mercury drives, and raced by Russ Wilkin and Jim Dyke).

You could tell the boat had been worked on, converted and repainted so many timesit had a quarter of an inch of

paint on it, Hledin says. It resembled a dowager empress who kept putting more makeup on without taking off yesterdays makeup. They just kept adding more and more paint instead of stripping it down.

Hledin advised Golie to strip the excess paint off the boat and start fresh, but Golie had already spent $40K painting the boat. Skater fixed the fuel tanks and a few other things for Golie. Its a great little high-speed boat, Hledin says. It is a very iconic boat, and Im glad someone like Brian has got it.

Golie is proud of the boat, but admits he sunk a fortune into the restoration of Blood Money. Its kind of idiotic, he says sheepishly. I mean, I could have prob-ably had a new Skater for what Ive put into this boat.

As for the Skaters performance, Theres

nothing like it, as far as Im concerned, Golie says. I get out on Havasu, and man, you barely have to give it anything. It doesnt jump out of the water. Just feed it some throttle, maybe youll see 6 inches of bow lift, and then it comes right down and youre doing 60. We havent run it really hard yet, but I know the boat is capable of 150 going wide open.

Golie extends special thanks to every-body who helped make the project a suc-cess, including Peter Hledin, Vern Gilbert, Carson Brummett and Fred Young. And now that the boat is finally in great condi-tion, hes looking forward to taking it out on the water this summer. I would like to do the Texas Outlaw Challenge and the Lake of the Ozarks Shootout, he says. In the meantime, hes going to be seeking out a tilt trailer.

[Continued from page 21]


EliminatorTop: How Sweet It Is, a 40' Eliminator cat, captures first

place with an average speed of 79.30 mph at an APBA race in 2002. Above: a 27' Daytona Speedster.


Let us invite you to a trip down offshore racing memory lane.

Let ustrip dracingThenThen

& Now& Now

Archival photography by Paul Kemiel

26-28,30,32_NowThen_0315 1.indd 2626-28,30,32_NowThen_0315 1.indd 26 2/3/15 5:33 PM2/3/15 5:33 PM

Above: The Executioner, a 40' Fountain at a 1991 Michigan City offshore race. Left: Black Pearl, a 38' Fountain cur-rently racing in Production 3 class.

Above: Cigarette Hawk, a 37.5' Cigarette at a 1982 race. Left: a 42' Cigarette Tiger on the current poker-run circuit.

Fountain

Cigarette


The most dramatic way to appreciate how speedboat styling has evolved through the passing years is to observe the radical differences side by side. Thats the concept behind this particular trip down memory lane: here weve collected an array of raceboats from yesteryear, juxtaposed with the same builders thoroughbreds of the modern era. Think of it as our Throwback Thursdaya chance to celebrate how styles, lines, colors and ideas have changed over the last quarter of a century. How these rockets have morphed may be an indicator of progress, but theres no denying that some things simply never go out of style...especially the never-ending quest for the checkered flag. Speedboat salutes the champions from a bygone age, as well as the current crop of speed-loving horsepower freaks. Designs may come and go, but the addiction to going fast on the water remains the common denominator, our passion, and our ultimate goal.


Left: Obsession, a 37' Outerlimits with driver Harry Turner and throttleman Michael Fiore at the 1996 Offshore World Championships. Above: Snowy Mountain Brewery, a 29' Outerlimits with driver Brian Forehand and throttleman Doc Janssen.

Below: Conch Attack, a 30' Spectre cat at the 1995 Offshore World Championships. Right: 2nd Amendment, a 36' Spectre driven by Karl Steger.

Right: Team Woody, a 39' Extreme from the 1999 Offshore Worlds. Below: Crazy Chicken, a 28' Extreme racing last year.

Spectre

Extreme

Donzi Below: Damn Donzi, , a 28' Donzi vee hull, averaged 60.48 mph in Factory I class at a 1998 race in Fort Myers, FL. Left: a modern Donzi vee hull at a recent Emerald Coast Poker Run.


Then & Now

Outerlimits


Left: The 38' Scarab Michelob Light at a 1982 APBA race in Michigan. Above: Rum Runners, a 28' Scarab currently

running in P4 class.

Below: Tommy Bahama, a 40' MTI powered by two 700-hp Nemschoff engines, at a 2000 APBA offshore race.

Right: Team CRC, a current 42' MTI competitor.

Left: Mr. Technology, a 34' Phantom at the 1995 Offshore World Championships. Below: #401 Simmons Marine in 2010.


Then & Now

Scarab

MTI

Phantom

Nor-Tech Below: Mastry Engine Center, a 38' Nor-Tech hull at a 1998 APBA offshore race. Left: the 52' Nor-Tech Loose Foot Too at last years Tampa Bay Poker Run.


Below: Systems, a 44' Victory at the 1996 Offshore Worlds. Above right: current World Champion Miss Geico, a 44' Victory.

Above: Kaama, KAAMA, a 40 Formula cat at a 1983 APBA Offshore race in Detroit. Right: a 35' Formula FasTech at the Powerboating for a Cure Poker Run in Virginia.

Left, Still Crazy, a 30' Velocity from 1984. Below: Aqualicious, a 29' Velocity shot at the 2013 Big Cat Poker Run.

Victory

Formula

Velocity

Skater Below: Miss Minneapolis, a 24' Skater cat driven by owner Bob Erickson and throttleman Hurley Stepp at a 1984 APBA Offshore race in Northport, Michigan. Right: The 32' Skater TJA Motorsports with triple 300 ProMax outboards.


Then & Now



Now under new ownership, the company offers a midcabin cuddy with solid workmanship and plenty of family appeal.

Caliber 1Caliber 1 28 Thunder Offshore

After launching Caliber 1 Powerboats in the 1980s, Cliff Lotz carved out a modest reputation for building a fine line of performance lake bowriders. The com-panys popular 2450 Interceptor nabbed Hot Boat Magazines coveted Boat of the Year honors, and other models (206 Skier, 2450 Phantom) are fondly remembered creations from a bygone era. Ownership of the company has changed a few times through the years, most recently to Robert Hoffman (of Coast Motor Group) and Jason Clarke (of Clarke Motors). The pair have set out to rebrand the company, offering a range of craft aimed at entry-level users on through to expe-rienced muscleboaters. Their line starts with a 21 jet or I/O model, with 20, 21 and 23 models available in open-bow and

walkthrough configurations, a 24 and 25 open-bow (midcab-in or walkthrough) and the 28 Offshore (available in closed-deck and open-bow versions); theyre also about to launch a newly tooled 2650 Deckboat. Were relaunching the Caliber 1 name, and plan to step the game up even higher, going for a really custom look at an affordable price, Hoffman says.

For our test, Caliber 1 lent us a 28' Thunder Offshore, a model originally released in 2004; it was powered by a stock MerCruiser 8.2 Mag HO sterndrive, with an anticipated 65-mph top speed. This was the midcabin cuddy open bow version, a very deep vee with two forward-facing love seats up front, two bucket seats for driver and co-pilot, and four molded-in seats in a rear bench. Its a fairly frill-free boat,

34-37_CaliberOne_0315.indd 3434-37_CaliberOne_0315.indd 34 2/3/15 5:35 PM2/3/15 5:35 PM


Caliber 1

WCaliber 1 28 Thunder

Length: 28' Beam: 8'6"

Engine on test boat: 8.2-L Mag HO

Drive on test boat: Bravo 1X

Base price: $89,900 Price as tested: $105,300

Options on test boat: JL Audio/Alpine stereo sys-tem ($4,900), billet drop-down seat bases ($1,500), matching gelcoat design inside cockpit ($700), flow-cloated engine compartment ($2,500), hydrau-lic scissor hinges with upgraded SS braided lines ($2,000), snap-on covers ($1,300), SS bimini with hard poles ($1,500)

Top speed: 63 mph

Caliber 1 Custom Boats905 Port Dr.

Lake Havasu City, AZ 86404

(888) 780-8282

caliber1customboats.com


Overall Id give this boat a 9 all the way down the line, including the interior layout, which is very well thought out.Alexi Sahagian

The billet seat stands are mounted on stainless plates screwed into the boat; they feature billet aluminum pieces that drop out. On the dash, Caliber has rigged Livorsi gagues on silver carbon fiber with race-style angled blue anodized bezelsa very nice touch.


Caliber One 28 Thunder Offshore


with a place for an ice chest, a flow-coated engine compartment and a JL Audio/Alpine stereo system. The seats feature French-stitched vinyl with pad-ding, which got a big thumbs-up from our test crew. The cockpit is carpet-free, just a fiberglass floor with some inlaid rubber mats; the cuddy and bowrider section feature glued-in carpeting. The billet seat stands are mounted on stainless plates screwed into the boat; they feature billet aluminum pieces that drop out. On the dash, Caliber has rigged Livorsi gagues on silver car-bon fiber with race-style angled blue anodized bezels, a very nice touch. The engine hatch lifts the entire back rest of the seat and provides decent access to the Mercury Mag HO, a cata-lyzed motor. The entire areas on either side of the motor have been allot-ted to storage; the bilge is finished quite nicely with silver gelcoat, even under the motor. Its an impressive installation, with rigging wells built into the transom that allow hiding the wires and cables coming to the motor.

Odyssey batteries in billet boxes have been placed starboard; engine hatch actuators operated with a hydraulic setup. Among the other creature comforts on the Caliber 1: blue billet grabhan-dles done in blue powder paint, an Aqua Performance telescoping ladder under the port side, rubrail made with a stainless molding and set in a plas-tic extrusion, a very attractive gelcoat, done largely in silver with a blue and green tribal print, and a little piece of carbon fiber insert on each hull side. When asked to grade the boat, virtu-ally every aspect of the installation was awarded a solid 8. For our on-water test, we made some slalom turns in the boat, paying a bit more attention to extra maneuvers because of the Caliber 1s very high freeboardsuch boats have a tenden-cy to lean out in the turns, but this one does not. For a vee, it executed the sla-loms decently and won the admiration of our test team. The boat does, howev-er, have a deceleration reactionback

off the throttles fairly hard, and it tends to go slightly off in another direction. The hull also does a bit of chinewalking when it takes boat wakes from the side at the faster speeds. But thats a minor issue; tracking while going straight ahead in low and midrange speeds was a 9-10 on our evaluators scales. Holeshot performance, throttle response, overall maneuverability and trim sensitivity were all decent. Ultimately, the 28' is a good, smooth, quiet boat. It comes up on plane with ease, drives along great at low speeds to tow a skier or a tube, and slices through the water like spaghetti. Overall Id give this boat a 9 all the way down the line, including the inte-rior layout, which is very well thought out, said test driver Alexi Sahagian. The engine installation is very clean. Its kind of amazing when you lift the hatch the engine is so far down because its such a deep vee. The 28' would be a great boat for a family stepping up to a larger boat in pursuit of lots of room and some nice styling.




Jeff Bohn creates a newdeckboat thats roomyand stylish.

CobraCobra 270 Python

New models are a rare breed these days among the go-fast builders, who have recently played it safe with their tried-and-true hulls. Jeff Bohn of Cobra Performance Boats (Montclair, CA) has bucked the trend by unveiling a new model: the 270 Python. Its a bold move in an era where few are apt to spend their profits on new R&D. Initially, the idea was to create a closed-bow cat, but Bohn decided that a deckboat would be a better direction. We wanted to make it look racy on the outside to please the hus-band, and a deckboat configuration on the inside to please the wife and kids, Bohn says. Its a very flashy on the out-side and roomy on the inside. The transom has been raised to hide a lot of the steering

cables and wiring, so the back of the boat has a unique look. The interior features two bucket seats for pilot and passen-ger, a rear bench with three headrests, and a forward bow area with two forward-facing seats, extended to accommo-date plenty of passengersthe boat will easily host a dozen or so adults and children, making it ideal for family and assorted friends. Pilot and co-pilot have a traditional wrap-around windshield, a break from the typical Cobra canopy styling. The boat has no rubrailits completely capped, will all of its colors in the gelcoat. Ours was a completely silver boat with orange, green and purple details, executed flawlessly. Its got a lot of round edges and some straight but spectacular tooling.

38-41_Cobra_0315.indd 3838-41_Cobra_0315.indd 38 2/3/15 5:37 PM2/3/15 5:37 PM


WCobra 270 Python

Length: 28 Beam: 105

Engine on test boat: Mercury Racing 565

Drive on test boat: Mercury ITS Bravo XP


Options on test boat: Full capped hull, fully hydrau-lic steering, 565 XR ITS / Sportmaster drive, Alpine stereo with four amps, four subwoofers, Vessel View 7 with depth, temp, GSP; Monster GPS gauges, hydraulic hatch hinges, full gelcoat in engine com-partment, Alcantara interior fabric with headrest, etc.

Top speed: 84 mph

Cobra Performance Boats5109 Holt Blvd.

Montclair, CA 91763

(909) 482-0047

cobraperformanceboats.com


Theres a large glove box for the pas-senger (right), while both driver and passenger have easy access to the ste-reo controls. Other amenities include numerous cupholders, large speakers, snap-in carpet and easy access to the expansive front bow.

This would be an ideal boat for a guy who wants something sporty and who needs the room to hang out. Its a Havasu River style boat, and its pretty cool. Bob Teague


Cobra 270 Python


Our tester was equipped with a Mercury 565 with Bravo drive and a 31" prop; it featured full hydraulic steering, ITS gimbal housing, Alpine stereo, Monster GPS and hydraulic hatch hinges. The interior sported an attractive custom fabric, which drew high marks from our evaluators, along with the impres-sive gelcoat. The windshield was extra tall, with large billet aluminum sup-ports on each side. Seating is expertly sculpted, with driv-er and passenger granted a generous distance between seat rest and dash. Theres a large glove box for the passen-ger, while both driver and passenger have easy access to the stereo controls. Other amenities include numerous cupholders, large speakers, snap-in carpet and easy access to the expansive front bow. Seat boxes are molded with ample storage underneath. Its a very well laid-out boat, notes test driver Alexi Sahagian, who gave high grades to the dash layouts Mercury Smartcraft screen and two analog gauges on either side, along with a fuel hatch pump and

bilge pump switch on the left side and other accessory switches on the right. The 565 MerCruiser has been painted orange to match the boat with carbon fiber accentsvery clean and simple, with no unsightly wires. The entire package is straightforward and sano. The boat also has a hideaway bimini top beneath the hatch, which will be invaluable during those hot California and Arizona summers. The 565 gets the Cobra on plane with relative ease; after some brief bowrise, it takes a set and feels glued to the water to about 40 mph until you give it some positive trim. Our drivers observed a slight list to the left side during the test. When you get to around 65-70 mph, the boat comes alive and performance is very good, Sahagian said. Even though youre driving along at a steady 70 mph, the boat still has a bit of a list to the left side. The Cobra stays flat and really excels while turning at cruise and slalom speeds. Theres no deceleration reac-tion, and the weight shift has a nice,

wide stance. The Cobra won high marks from Bob Teague on low-speed tracking and midrange speeds, though he notes that trimming at high speeds resulted in a hop. It might be different with a couple of people in the bow, he observed. In his acceleration run, Teague planed in 4.88 seconds; zero to 60 was achieved in just under 20 seconds; top speed of 84 mph came at 5,400 rpm. We awarded the Cobra high marks for having zero steering wheel torque, dash layout, low speed and overall maneuverability and performance at speedwith the exception of the por-poise at higher speeds, even in neutral trim. This is the first of the units from Jeff Bohn, who has been on a little bit of a hiatus from Cobra, Teague says. Hes done a respectful job and put a lot of effort into this. This would be an ideal boat for a guy who wants something sporty and who needs the room to hang out. Its a Havasu River style boat, and its pretty cool.




The Ontario, CA-based builder flaunts their A-gamewith this stylish and roomy family deckboat.

EssexEssex 28 Fusion

When our test team first encountered Essex Boats 28' Fusion six years ago, we were impressed with its clean consistency and sweet, elevated ride at cruisethe 55-mph ride at 3,500 rpm was truly exceptional. Our introductory power package was a TCM 900 with Platinum XR drive, which barely broke a sweat as it efficiently dis-patched horsepower as needed. In our most recent test, Essex opted for the current engine of choicea 565 (Racing with ITS) coupled to a Bravo One XR drive. Thus, the triple digits we saw originally were going to be off the table this time around. And yet, an anticipated 80-mph tall speed strikes us as perfectly reasonable for a family performance deckboat.

And a stylish boat it remains. Cosmetically, the Fusion continues to impress us with the impeccable finish that has made Essex a coveted brand through the years. Its a pretty neat boat, observed test driver Alexi Sahagian of the Fusion, which sported an attractive gelcoat of orange, white, gray and silver, with a large Essex logo engraved into the mold on the bow. Boarding the Fusion is a breeze, with its extra-wide bow area covered in nonskid, and storage compartments integrated into each sponson. Take a step down and youre in a roomy bow section that can easily accommodate several adults; seats offer a comfortable forward-facing backrest, speakers and a pair of cupholders on either side. Walking through to the cockpit, youll encounter a sink built into

Above: the 28' Fusion turns heads at arecent Los Angeles Boat Show display.

42-45_Essex_0315.indd 4242-45_Essex_0315.indd 42 2/3/15 5:40 PM2/3/15 5:40 PM


WEssex 28 Fusionlength: jfkdsjlkjfdlk

Length: 28'3" Beam: 102"


Drive on test boat: Bravo One XR


Top speed: 80 mph @ 5,400 rpm

Prop: 26'-pitch Mercury four-blade

Standard features: Stereo with four speakers, stainless 8 bimini top, dual batteries, tilt steer-ing, interior lights, Cargo Bay lumination, onboard sink and internal water tank, onboard shower and boat washdown, carpet kit, in-floor ski locker, walk-through transom, remote controlled dual ram sun-deck, billet seat pedastels, etc.

Essex Boats1830 S. Baker Ave. Ontario Ca. 91761 (909) 923-7739

essexboats.com


Both the driver and passenger have small push-up wind visors; on the dash are an array of Livorsi gauges featuring black carbon fiber and billet panels featuring switches for bilge, blowers, etc.

This is a great choice for people who want a performance boat thats like a pontoon, but they also want speed and style. Bob Teague


Essex 28 Fusion


the the starboard side bulkhead and a built-in wastebasket on the port side; both are covered with hinged doorsa rather unique feature on a deckboat. Theres plenty of storage space on this boat, including a compartment located underneath the drivers console. Both the driver and passenger have small push-up wind visors; on the dash are an array of Livorsi gauges featuring black carbon fiber and billet panels featuring switches for bilge, blowers, etc. A cool Mercury DTS shifter is placed off to the right in matching billet. The entire backrest of the rear bench lifts up for easy access to the engine compartment. Inside, the 565 engine has been painted orange to match the boat. Its been mounted on a Mercury race-style plate mount on L angles that are through-bolted to the string-ers. Youve got excellent access to the engine on the port side, due to a walkway on the starboard side for exit access to the back of the boat. Snap-in carpet sections adorn the floors; theres also a floor drain in the rear section

for when its time to hose the back of the boat out. The rear bench features a Velcroed-down seat cushion, under-neath of which is a gelcoated storage compartment that goes all the way down into the center pod. Overall, the Fusion a superbly designed lake rod, and one of the nicest-looking deck-boats available. Essex builds one of the most attractive interiors in boating, and they genuinely excel in executing the Fusions passenger space. All of the vinyl was perfectly comfortable, and leg room was easy to come by. The nonskid texture on the flooring is another excellent touch. Putting the boat through his typi-cal series of acceleration tests, slalom turns and WOT runs, driver Bob Teague noted that the boat tends to lean out into the left-hand turns, producing a vibration from the right sponsona condition that gets better as the speed increases, he said. The boat tracks nicely, is appropriately sensitive to trim, and comes on plane very quickly. I was surprised that the boat got to 80

mphits one of the better features of the boat, Teague noted. Above-average grades were earned for overall maneu-verability, deceleration reaction, lack of steering wheel torque and visibility coming on plane. Throttle response is way better than I thought it would be, Teague wrote. The ideal setting for this boat is river and lake family fun, and hanging out in the channel. This is for people who want a performance boat thats like a pontoon but they want speed and style. Sahagian also noted the mild list to the port side, adding that once youre trimmed and bring the speed up, she straightens out and takes a decent set. At low speeds, its an unspectacular ride up until about 40 mph, and she wakes right up. Overall, Sahagian described the Fusion as a surprisingly fast, moderate driving boat, with satis-factory acceleration from 40 to 80 mph. It jumps right up to 70 when youre cruising, and then it creeps its way up to 80 mph. Teague got her to 70 mph in a mere 20 seconds.




This ultra-wide and roomy craft practically defines luxury deck-boat thrills.NordicNordic

29 Deckboat

Nordic Boats of Lake Havasu describes its five-year-old 29' Deck Boat as its biggest seller. Though its appeal is obvious, our recent test of the 29 was, astonishing-ly enough, our first on-water encounter with this incredible machine. Designed and tooled by Nordic general manager Thane Tiemerwho previously built Eliminator Daytonas for Bob Leachthe 29' is the sister ship to Nordics 26' Deck Boat, itself a very roomy family thoroughbred. With the 29', Tiemer has created a boat from scratch featuring deep spon-sons resulting in a very wide boat (101 beam). Ive widened

it out as far as I could go where they could still laminate and build the boat, Tiemer told Speedboat. And its made the interior huge.

According to Tiemer, the boats number-one most popular motors are the 565 and the 520; former Indy racecar driver Dennis Firestone ordered one with a 825 Teague that runs right at 100. Don Schroeders 29', meanwhile, has a 1025 Teague that runs close to 110. We grudgingly settled for the 565 setup, said to deliver 85 mph.

Credit Nordic for truth in advertising: the 29' is genuinely

46-49_Nordic_0315.indd 4646-49_Nordic_0315.indd 46 2/3/15 6:55 PM2/3/15 6:55 PM


Right: an outboard-powered 29' steals the thunder from other boats on display at

last years Los Angeles Boat Show.Bottom: our Mercury Racing

565 engine.

WNordic 29 Deckboatlength: jfkdsjlkjfdlk

Length: 27'6" Beam: 101"


Drive on test boat: Mercury Bravo


Standard features: Mercury 8.5/Mag HO, Bravo X drive, dual electric hat rams, billet battery boxes, dual batteries and built-in battery charger, Livorsi gauges, LED bow lights, rear transom mounted trim switch, through transom exhaust, et al.

Options on test boat: Custom stereo upgrade.

Top speed: 82.5 mph

Nordic Boats770 N. Lake Havasu Avenue

Lake Havasu City, AZ 86403

(928) 855-7420

nordicboatsusa.com


We went over some bumps out there, and the boat just climbed right over them. Great job. Bob Teague

Our test 29' Deck Boat was equipped with a custom stereo system upgrade, located both port and starboard; the dash sports a Smartcraft Vessel View digital monitor, alongside analog gauges. Up front is a roomy lounge-seating ensemble designed to provide exceptional comfort for passengers.


Nordic 29 Deckboat


wide and extremely roomy. It looks great on the water and has a great set to it, raved evaluator Alexi Sahagian. Its long, flowing exterior lines lend a dramatic flair, and the interior offers plenty of room with tons of storage. Entering from the bow is a breeze, with lots of room and the perfect level at the dock to get in and out. Our tester was equipped with a custom stereo system upgrade, located both port and starboard; the dash sports a Smartcraft Vessel View digital monitor, alongside analog gauges.

Up front is a roomy lounge-seating ensemble designed to provide excep-tional comfort for passengers. Other interior features include a built-in privacy enclosure, ergonomic console with wraparound split wind screens, and a signature molded swim platform. The boat is full of attractive custom installations and solid, comfortable upholstery work, done in house. The 29' virtually defines family deckboat fun, with a truly incredible array of special featuresit offers more inte-

rior room and amenities than other boats, while capturing the style and performance of a ski boat. Its nearly impossible to find a negative on this boat, but we werent crazy about the existing trim gauge, which should have been incorporated into the VesselView system, and Nordic should consider providing a padded area for the driver to rest his elbow, rather than the hard fiberglass area thats there now. But those are minor quibbles on a boat that offers so much luxury and efficiency compared to many other deckboats available in todays landscape.

The 29' comes on plane with ease, and without a lot of bowrise. Once youre on plane, feed it some positive trim, and the boat takes a good set. It runs pretty straight when youre run-ning along at moderate trim, reports Alexi Sahagian. We got from 50 to 70 in no time at all, and the boat cruises nicely between 60 and 70 mph. We were able to get it up to past 80 mph in our flat conditions.

We awarded the Nordic high marks

for its ability to turn, particularly in the low-speed turns. The boat slaloms really good, especially for its size, said test driver Bob Teague. It handles great, although it does take a lot of rpm to achieve the midrange speeds. Then it starts multiplying quite quickly. In addition, he said, theres no deceler-ation reaction. We went over some bumps out there, and the boat just climbed right over them. Great job.

Among the boats other positive performance attributes: excellent low-speed tracking, low-speed maneuver-ability, overall maneuverability, throt-tle response, sensitivity to trim, lack of steering wheel torque, and visibility coming on plane. The boat is relatively fast for its size and the power involved.

Its little wonder that the 29' has proved itself as a solid and enduring winner for Nordic. The company pro-duces one of the top deckboats on the market, and this one was unanimously ranked as a favorite of all the models we tested this year. We cant wait to take it for another spin.




Heres a one-off vee that offers a little bit of old school styling and high-tech testosterone.

SkaterSkater488 SLV

Built by Douglas Marine of Douglas, MI, the Skater 488 SLV is essentially a one-off created by Peter Hledin in 2011; the boat was loaned to our team by its current owners, the Rodriguez family, who operate it on Lake Havasu and at poker runs across the West Coast. Described by its owner as screaming fast out of the holeit really gets up and goes, and with a top speed around 115 mph, the unique vee-bottom hull is powered by a pair of Mercury Racing 700 SCi engines with Stage 3 Whipple kits, #6 dry-sump drives coupled to Hering propellers. Its an awesome, sexy-looking boat, gushed test driver Alexi Sahagian, who awarded the overall construction a 9 out of 10. Its strictly a poker-run machine, and the interior is for storage only. The

boat appeared to be rigged by a third party (based on the exemplary jobs weve seen come from Skater), but quality, fit and finish were all good, especially considering that this is a four-year-old boat. From bow to the stern, its just a mean-looking machine, Sahagian says.

Basically, the 488 is a stretched version of the Skater 39 vee-bottom, a two-step hull with a dedicated set of tool-ing. Painted by Boats.com, the boat has no rubrail and sports a typical Skater layout, with epoxy, carbon fiber and Kevlar. Its got an Aero Marine wraparound windshield that Skater uses on its more well-known cats.

Tooling and mold work on the boat is, in a word, spec-tacular. A Latham Marine unit offers the ability to move the

50-53_Skater_0315.indd 5050-53_Skater_0315.indd 50 2/3/15 5:42 PM2/3/15 5:42 PM


W

Skater 488 SLV

Length: 48'8"

Standard engine: 1550 Sterlings

Engines on test boat: (2) Mercury Racing 700 SCis

Drives on test boat: Dry-sump #6 drives

Props: 5-blade Herings

Top speed: 111 mph

Douglas Marine / Skater6780 Enterprise Drive

Douglas, MI 49406

(269) 857-4308

skaterpowerboats.com


I didnt even realize I was going 100 mph until I looked down at the

gauges. The boats really good. Bob Teague

A Latham Marine unit offers the abil-ity to move the steering from the starboard side to the port side. Each of the passengers on this five-seater has his own high-back seatdriver, co-pilot and three passengers in the rear, evoking an old-school Miami Vice style configuration.


Skater 488 SLV


steering from the starboard side to the port side. Each of the passengers on this five-seater has his own high-back seatdriver, co-pilot and three pas-sengers in the rear, evoking an old-school Miami Vice style configuration, with a center throttle console setup and aircraft-style toggle switches on a dash panel thats still stylish today. Indeed, the overall boat is an incred-ible blend of old school and high-tech.

The dash is absolutely covered in gauges, both port and starboard. The Skater has been rigged with a duplicate set of gauges on each side, except for the boost gauges exclusively on the starboard side drivers position; water pressure gauges and volt meter are on the center console. We were also impressed by the Garmin GPS and the full complement of Autometer gauges, including liquid-filled pressure gauges for oil and fuel pressure. Sitting in the drivers seat is extremely comfortable, and youll look damn good as well.

Our entire test crew awarded very high marks for engine installa-

tion, access to minor services, car-pet installation, steering, overall qual-ity of construction and fit and finish. Cosmetically and structurally, the 488 SLV is a stunner.

It was a hot and sticky day in Havasu when we took the Skater out on the water. From the get-go, Bob Teague was impressed by the boats speed and handling, noting that it accelerates well for its size (the 850 hp with Whipple upgrades making a comfortable fit with this hull). I was surprised that the boat did the slalom so well, he observed. The boat takes a nice set, leans into the turn, doesnt feel like its going to hook. Cruising up the lake and doing S turns, I didnt even realize I was going 100 until I looked down at the gauges. The boats really good.

Driver Alexi Sahagian found that the Skater came on plane quickly by feed-ing a little trim and leaving the tabs at about 2-3 in our flat water condi-tions. The boat feels a little stuck to the water, but it scoots right along, he says. A good cruising speed in this

boat is about 75 mph. Its comfortable and smooth at about 4,000 rpm and everythings happy. As you transition to full throttle, acceleration is moderate; as you trim it a little higher, the boat starts to pick up and take off. While we wished the conditions were a little rougher and a bit windier, the Skater was still a pleasure to drive. We coaxed a top speed of 111 in our dead-flat water, a few more mph were obvious-ly possible under optimal conditions. And its very comfortable at 100 mph if you hold it there, Sahagian adds.

The 488 would be a ideal boat to take out on the oceana trip to San Francisco Bay, for example, or on riv-ers and waterways like the California Delta. Its nimble enough and big enough, notes Teague. Its a one-of-a-kind vee-bottom from Skater, a builder better known for its catamarans. This would be a great boat for somebody who would buy a Ferrari or some-thing different than what his neighbors haveas well as a taste for cool and unique stuff.




Speedboat tests the Battery Saver, designed to keep your boats battery chargedand living longer.

BatteryBatterySaviorSavior

This month, the Speedboat tech crew tested a new apparatus called Battery Saver, designed to keep your boats battery charged, maintained, rejuvenated and conditioned. As the owner of a boat, you already understand how important your battery isbut its equally important to keep the battery charged and maintained, and to extend its life as long as possible. This new product claims to do that by changing the old-fashioned (and potentially harmful) way traditional battery chargers do their job.

The story starts with auto collector and enthusiast Frank Gabrielli of Danville, CA. He isnt merely a car nuthes also an elec-trical engineer. So he has an edge when it comes to solving problems, and one dilem-ma he occasionally encounters is (of course) the dreaded dead battery. In one month alone, he had a series of batteries go bad on

TH

E

Battery Savers 50-watt model can charge up to

four batteries at the same time.

By Brett Bayne

54,56-57_BatterySaver_0315.indd 5454,56-57_BatterySaver_0315.indd 54 2/3/15 8:44 PM2/3/15 8:44 PM


The Battery Booster

him. Why is it, he wondered, that cant somebody make a high-quality battery charger? The issue bugged him enough that he started thinking about how to resolve the issue himself. I could prob-ably invent something, was the conclu-sion he ultimtely came to.

Over the following year, he immersed himself in research, poring over a mas-sive amount of battery-tech literature, and examining virtually every product, patent and manufacturer in the automo-tive landscape. At one point in his stud-ies, he became interested in a relatively new process called Pulse technology. Originally developed by the government for the military, Pulse was originally designed to accelerate the rate of charge at a lower amperage. When you charge a battery at a higher amperagethe tra-ditional methodyou can create a con-dition that can cause flaking, where tiny flakes fall off the plates. (When you hit them with anything above 7 amps, they dont like it, and 12-15 amps means actual damage is imminent.)

Gabrielli reasoned that if you had a charger that was putting out 5 amps, youd produce a charge rate equal to about 12-13 amps, allowing the user to charge a battery more quickly, but at a much lower amp output. The technolo-gy was perfect for huge combat vehicles, which need to have batteries charged in a hurryreplacing a giant battery is often a laborious task under intense conditions. Eventually, that technology expanded to desulfate a battery while youre charging it at an accelerated rate at lower amperage. After studying this technique, Gabrielli improved on the process, making it more effective. His Deep Cycle Circuitry & Advanced Auto-Pulse Technology is now utilized by his Battery Saver productsits the primary element that prevents and/or dramati-cally reduces the accumulation of dam-

aging lead-sulfate deposits (sulfation) on battery plates, thus enabling the bat-tery to continue to accept, store and release maximum power at all times. All battery chargers charge batteries, explains Battery Saver distributor Max Ramras, but our number one job is to de-sulfate the battery while were charg-ing it. All the other chargers simply focus on trying to give it as much charge as it can handle or take.

Several models of the Battery Saver are available, including 12W, 25W and 50W configurations. Speedboat tested the 50W, which can charge a dead, non-sulfated battery to full in about two hours at less than 5 amps. (More highly sulfated batteries may and more often do take longer.) Thats whats incrediblethat Pulse accelerates the rate of charge at a lower amperage rate, Ramras says. Thats amazing for a lower-amperage battery charger. Our techies admired the fact that the 50W models will charge up to four batteries in parallel, albeit at a reduced rate.

Another cool feature of the Battery Saver is the Load Tester, which is essen-

tially a battery quality test. The built-in Load Tester and a Proprietary Deep-Cycle Circuitry can not only be used to test the battery condition, but also cycle a weak battery back to health. It also has a built-in diagnostic voltmeter, so that tests on all 12-volt electrical compo-nents can be performed. The Load Test is easy to perform: simply disconnect it from the AC power, and now the trigger indicates that its no longer receiving power. At that point, it understands it must automatically turn into a tester.

You may be wondering if the Battery Saver can bring a dead battery back to life. Although the unit is designed to keep good or new batteries in peak con-dition for longer periods of time, some Battery Savers can be used to bring batteries that will not accept and hold a charge back to useful conditioneven if its been left in a discharged state for an extended period of time. Thats one of the many ways Battery Saver dis-tinguishes itself from the competition. After a battery is connected to a linear charger, the sulfated plates can inhib-it the amount of charge that kind of charger can provide to a battery. When you try to utilize the battery, it simply doesnt have the strength to work prop-erly. Utilizing Battery Savers proprietary Load Test and Deep-Cycle Circuitry, which actually cycles the batteryuti-lizing its Pulse technology between the

Among the great fea-tures of the 50-watt Battery Saver: It can charge a dead, non-sulfated battery to full in about two hours at less than 5 amps.



fully charged state and a completely safe but discharged statethe Battery Saver charge can, in most cases, bring a battery back to life. The process is relatively simple: charge the battery, then turn on the Deep Cycle switch. The Load Tester will slowly drain the voltage down to approximately 11.4 volts, and then automatically switch back to charging mode, thus bringing the battery back up to a full charge. Repeating this pro-cess is called Deep Cycling and focuses on getting your battery back to health.

In addition to creating the impressive Battery Saver, the company has also begun marketing its Micro-Jump unit (shown above), designed to jump-start a dead 12-volt battery. A number of these kinds of products have hit the market in the last year and a half, Ramras says. We studied all of them carefully, and talked to a lot of customers to learn all of the positives and negatives of each of the features that were available. Then, after listening to what they had to say, we simply built the best unit available. So far, sales have just been crazy.

The Micro-Jump may not be the cheap-est version available, but if you store it without using it, itll hold the charge for up to a yeardepending on the ambient tem-perature where youre storing it. If youre in Arizona during the summer, or in Northern Canada, youd be lucky if you got six months out of it, Ramras says. But if youre in Southern California, it should last well over six months and as much as 12 months.

For more information, or to purchase a Battery Saver or Micro-Jump, please visit r2batterysaver.com or call (602) 717-7800.

Battery Savers Micro-Jump unit is designed to jump-start a dead 12-volt battery.


V-DRIVE TECHJIM WILKES [Continued from page 10]

Old HydrosDear Jim:

Id like to ask a setup question on an old shovel. Im having a few con-cerns about my boat and need to either get my mind right or have my dreams dashed. Im hoping you will remember back when these things were fuelers.

What is the best method for settling back in? Back off and hope for the best, or is there another way? The boat performs awesome at speed, and at times can be a bit unruly settling back in at the end of a pass.Kevin HarperSpringfield, IL

What memories you bring back! I was laughing for quite some time about your question, and Im not sure I have have right answer. Most of these old hydros have a small seat installed, and even when I was younger, before I grew into my full-figured body, I had a hard time staying in the seat both on accelera-tion and deceleration. I always seem to sit on top of the seat, not in the seat.

Now for the real answer. When your boat accelerates, you start to reduce the wetted area or drag on the bottom of the hull. The faster you go, the less drag. Now, do you remember the equation we learned in school: For every action there is a oppo-site and equal reaction? OK. So now you decelerate and what happens you create drag at a rapid rate? Sometimes the boats sponsons will drop back down in the water a little faster than other times, causing you to hold on tighter and try to hold yourself in the seat. This seems to happen in this style of hot rod boat. Maybe a custom seat with higher sides might help hold you in better, but it wont look as sexy as the oh-so-small seat. Good luck, Kevin, and keep us informed on the wild ride!

Centered Headers?Dear Jim:

Once in a blue moon, I see headers that exit over the transom, one on top the other, in kind of a figure-eight style. What are these called? What do you think about them? Thanks!Jared ThompsonIndianapolis, IN

I think youre talking about what are known as 180-degree headers. This type of system was built for the automotive race industry. Jim Clarks Indy car with a Ford engine used this type of header. They were tuned for maximum performance at a given rpm range. We used a set like this on our SilverWing ET boat with a Jaguar engine tuned for 7,200 rpm. Some guys run this style exhaust because they like the different sound they produced. Im not sure they make any more power in a flatbottom-style boat, but I have no doubt that the guys who use these headersand pay big money for themsay they do.

10,58_PB_JimWilkes_0315.indd 5810,58_PB_JimWilkes_0315.indd 58 2/3/15 5:30 PM2/3/15 5:30 PM


New ProductsBRETT BAYNEPremium PistonsCP-Carrillo of Irvine, CA, has introduced its X-Style pistons for Power Adder applications. These pistons include the advanced features and improve-ments that CP-Carrillo has developed through rigorous testing and R&D. Manufactured from 2618 T-61 alloy, these pistons utilize an X forging for added structural support and durability, can be designed with buttons, or with

wire locks. Includes vertical or lateral gas ports and forced pin oiling. They are ready for immediate delivery.

CP-Carrillos X-style pistons are ready to drop in to an engine, and should improve horsepower and durability out of the box and will be available on the shelf. They are available for Top Alcohol Hemi applications in a +4.467 bore and hemi or Canted Valve for Pro Mod with a +5.000 bore. The struts are straighter

than round style pistons. These pistons can run narrower rods and shorter pins, often resulting in reduced weight for most applications.

CP-Carrillo is a company totally dedi-cated to pistons and connecting rods. Experienced sales specialists provide unique piston and rod solutions for a myriad of engine applications. The company continuously endeavors to combine manufacturing excellence, product guidance, and ongoing tech-nical support to effectively address its customers needs.

For more information, please call (949) 567-9000 or visit cp-carrillo.com.

Cylinder Heads for BBCUnleash the full potential of your big-block Chevy with the power of RHS 24-Degree Cylinder Heads. These heads feature 24-degree valve angles and raised exhaust ports while using a conventional valve train and pistons.

60,61,62,82_PRODUCTS_0315r.indd 6060,61,62,82_PRODUCTS_0315r.indd 60 2/3/15 5:56 PM2/3/15 5:56 PM

The Pro Action line of cylinder heads are the cornerstone of the RHS line. They are ideal for a variety of performance applications, including hot rod, drag rac-ing, oval track racing and marine uses. These heads deliver more features, high-er flow characteristics and better finish quality than other competitive brands.

RHS Pro Elite Cylinder Heads are designed for racers who want the abso-lute best engine performance. Pro Elite Cylinder Heads utilize innovative design features, modern engineering methods and precision CNC-machining.

For more information, please visit rac-ingheadservice.com.

Billet Trim Tabs

Livorsi Marine of Grayslake, IL, will be unveiling a new line of billet hydraulic trim tabs at the Miami International Boat Show, Feb. 12-16. Available in four dif-ferent sizes, the tabs will accommodate performance boats as well as center con-soles, cruisers, military and workboats from 20 to 50 feet.

The trim tabs are all CNC machined billet aluminum and hard coat black anodizing to prevent corrosion. The tran-som plate can be a Mercury bolt pat-tern or a much smaller Livorsi transom


plate. Electric sensor feed the info to LED Indicators, NMEA2000 or a Mercury Vessel View.

Some key features of these tabs: All hinge pins and hardware are stain-

less steel. Adjust transom angles with out the use

of special tools. Hydraulic cylinders designed for 1500

PSI working pressure with dual seals; cylinders may be serviced.

Four anodes for complete saltwater protection.

Stainless steel braided hoses are pur-chased separately.

Be sure to visit Livorsi at the Miami show at booth #G90 and consider a set in your next build.

For more informationl, call (847) 752-2710 or visit livorsi.com.

High-Pressure Fuel Pump

AEM (Advanced Engine Management) Performance Electronics of Hawthorne, CA, has introduced its 380-lph High Flow, High Pressure Fuel Pump for high per-formance naturally aspirated and forced induction EFI vehicles (PN 50-1005). The pump can be installed externally or in-tank using optional hardware that is sold separately. It utilizes the industry standard "044 Style" envelope and -10 AN female inlet and -6 AN female outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. The 50-1005 fuel pump delivers incredible performance and value with an approxi-mate street price of $155.00.

AEM's fuel pump is capable of sup-porting over 1,200 HP normally aspirated and a whopping 1,075 HP at 30 psi boost.


New Products


Bretts

Cole Restoration TPR Stealth 66 Schiada

ALSO:

HEAVENLYHALLETT

63_BrettsCove_cover_0315 1.indd 6363_BrettsCove_cover_0315 1.indd 63 2/3/15 7:21 PM2/3/15 7:21 PM


Yet another chapter in the never-ending saga of immaculate boats that were found languishing in a barn.

Endlers GameEndlers Game

Photo by Andrew Gates

RESTORATION

64-69_resto_endlers_0315 r1.indd 6464-69_resto_endlers_0315 r1.indd 64 2/3/15 7:26 PM2/3/15 7:26 PM


You may have seen Jordan Endlers other boat, a 1983 Haskell runner bottom, in a recent Reader Rides section of this magazine. That boat has been sold so Endler could pur-chase this 1978 Cole TR2 flatbottom. Its powered by the same 500-c.i. big-block Chevy (15% overdrive) with a Casale 10% V-drive.

The boat had been in and out of several garages and barns over the past 25 years. The boat has changed hands several times; it had languished in a barn for 10 years until Endler heard that the owner had some flatbottoms and went to take a look. The man had no problem showing me his boats, Endler recalls. In the corner was the Cole, and as soon as he

pulled back the cover, I had to have it. Essentially a bare hull with almost no rigging, the Cole was

sent to Jim Miller of Miller Custom Boats, who mounted the V-drive and re-glassed the floors. Endler did the remainder of the rigging himself, fabricating nearly everything in his garage. He plans to run the boat in NJBA or Lucas Oil drag rac-ing series in the 10-second Modified Eliminator class.

Endlers cousin, Jacob Rodriguez, helped with the build, dispensing ideas to Endler during its transformation. He too loves V-drives, and we plan on building a hydro for him to run on the Parker strip or in competition. Hes our crew chef and helps me work on and tune the boat.

Read on to explore how Endler brought the Cole to life.



Endlers Game

Left: Endler with his other boat, a 1983 Haskell runner bottom. Below: The boat 25 years ago, photographed by one of the original owners. It was originally rigged in 1986; it was later completely stripped of its rigging and trailer, which was then put into a Canyon flatbottom. The Cole was most likely powered by a big-block Chevy.I think the boat was originally raced in the NDBA circuit in the early 1980s. It was originally yellow, from what can tell from the the little nicks and under the cav plates.


2 holes are drilled into the backup plate (seen-mounted at left).

Endler mocked up a backup plate on the boats transom to support the pillow blocks that hold the control rod to the back of the boat.

Endler fabricated these engine rails and drilled holes as he prepared to mount the the big-block Chevy. The rud-der support was also installed (top left).

Endler drills a 2 hole into a piece of aluminum as he fabricates a water temperature gauge and bilge pump switch mount.



The transom has now been completely finished, with backup plate powdercoated blue and the cav plates mounted. Above: the strut brace now has 2" holes drilled and is ready to be powdercoated blue. Below: the base of the strut brace. Right: the strut brace is mocked up and ready to have 2" holes drilled into the flat alumi-num braces that connect to the stringers.


Endlers Game


Left: The final V-drive installation comes together, with floors flow-coated and awaiting the installation of the propshaft. Below: the boat on Lake Havasu. We now see the fuel tank and engine completely installed.

Left: Endler painted this helmet in auto-body class during the boats resto-ration. It was painted to match the theme of the boat.




Scott Turners 1982 19'6" Hallett SS previously graced our swimsuit section. Now she gets her close-up.

Head Head TurnerTurnerPhotos by Ray Lee and Brett Bayne

70-73_SB_HeadTurner_0315-r1.indd 7070-73_SB_HeadTurner_0315-r1.indd 70 2/4/15 12:14 PM2/4/15 12:14 PM


Scott Turners hot-boating odyssey started during his days toiling in a towyard when a flatbottom V-drive entered the premises. It was a pile, but my work partner and I put blood, sweat and tears in that thing, he says. It was good training ground for his later boats, including a Schiada flatbottom and a Barron Sprint. Eventually, a buddy was selling his Hallett. After looking at it, I just couldnt get it out of my mind. I had to buy it, Turner says. So he sold the Barron Sprint and started building a motor for the Halletta blown, intercooled 540 assembled by Vince Urieta of V-Power Performance (Lake Elsinore, CA). Hes hasnt pushed it to WOT yet. Ive taken it up to about 90 mph, and thats as far as Ive taken it. Starts to get a little squirrelly. Turner, 43, works in fleet management at an aerospace company.


The Hallettonce a ski-race boatsports its original gelcoat, seats and floors. It comes out of the hole real nice, Turner says.

Vince Urieta of V-Power Performance (Lake Elsinore, CA) built the Halletts blown, intercooled 540. Most everything on the boat is original, including the gelcoat, seats and floors. The motor is awesome, Turner says. At high speeds, though, it wants to pull hard to the left. And I dont know why that is yetIm kind of working out those kinks, he says. Starting at about 85-90 mph, it starts to get a little squirrelly.


Head Turner



Lake Havasu resident Rick Escott gets his kicks in a 66 Schiada.

Photos by Andrew Gates

Lake Havasu resident Rick Escott gets

Rat TrapRat Trap

74-77_SB_RatTrap_0315.indd 7474-77_SB_RatTrap_0315.indd 74 2/3/15 7:57 PM2/3/15 7:57 PM


If Rick Escott's 1966 Schiada, Rat Trap, seems vaguely familiar, it may be because you saw it in the pages of Hot Boat 11 years ago, when we posed future Playboy bunny Kendra Wilkinson on it. Back then, it was owned by Kevin Towle (who was only 6 years old when the boat was built). Its changed hands over the years: Rick, the current owner, bought it from a classic boat aficionado in Los Angeles whod had it stored in Blythe for a couple of years. It was pretty thrashed, reports Escott, who lives in Lake Havasu

City. I had to bring it home, buff it all out and get everything working again. It was only later that people started to tell him theyd seen the rig in Hot Boat. After I got it home, some people on the online forums mentioned it, he says.

The Schiadas engine had been restyled with a number of modern-day flourishes: The valve covers each had a velocity stack on it and a bunch of modern parts, Escott says. I put all of the nostalgic parts back on it, including the original scoopluckily, he still had that in a box.



Rat Trap



Rat Trap's owner, Rick Escott, needed to buff out all the aluminum on the boat, which was "all flawed or pitted and dull the same as the boat. It was in pretty bad shape when I got it," he says. "It just required a lot of buffing and cleaning, basically." Escott works for a concrete company in Lake Havasu City, AZ.



Deep in the heart of Texas, Eric Bain flexes the muscle of his 1997 Tom Papp Stealth.

Story by Brett Bayne

No Bain, No Bain, No GainNo Gain

Eric Bain's 19' Tom Papp Racing Stealth is a formidable jetboat challenger on any number of lakes along Texas and Oklahoma. The rig sports a twin-turbo 572" big-block Chevy, and among its most popular haunts is Broken Bow lake, a reservoir in southeastern Oklahomaone of the

Speedboat April 2015 Online Edition

Documents

Transcript of Speedboat April 2015 Online Edition