Six pounds lighter than its predecessor, and just as powerful, the S 700E2 is light years ahead of anything the competition has to date. This battery-powered cutter performs heroic rescues without hoses or a power unit. It’s designed to take on current as well as future vehicle construction. Plus, it has 77% more cutting force where you need it.

Speed and power packed into one game-changing cutter.

Features and Benefits:

• Highest cutting performance in the relevant work area

• Unique blade geometry with three distinct cutting angles

• Built for the high-strength steel of today and tomorrow’s vehicles

• Ergonomically designed star-grip permits tool actuation from almost any gripping position

• Each tool comes with two batteries and one charger

• If needed, you can plug it in for limitless power with the eDRAULIC™ 110v adaptor

Technical Specifications:

• Length: 36.2 in / 920 mm

• Width: 11.7 in / 296 mm

• Height: 10.3 in / 262 mm

• Weight: 48.1 lbs / 21.8 kg

• Cutter Opening: 7.6 in / 192 mm

• NFPA Cutter Rating: A8/B9/C8/D9/E9

• NFPA 1936 2010 Compliant: Yes

8 0 0 . 5 3 7. 2 6 5 9 • 7 11 N . P O S T R O A D S H E L B Y, N C 2 8 15 0 • J A W S O F L I F E . C O M

part #: 272085000

©2014 Hurst Jaws of Life® • Sheet# S700E2 - 04.14

S 700E2 CUTTER

It may be the 700’s little brother but it doesn’t lack for power. This tool is the perfect extrication cutter and is the most convenient tool for getting to the action. Nearly four pounds lighter than its predecessor, this tool moves quickly at the scene – and past the competition.

The S 700E2’s little, but powerful, brother.

Features and Benefits:

• Smaller and lighter than its predecessor

• Standard extrication cutter

• Ergonomically designed star-grip permits tool actuation from almost any gripping position

• Curved blade geometry pulls materials to the back of the blade area for fast, clean action

• Each tool comes with two batteries and one charger

• If needed, you can plug it in for limitless power with the eDRAULIC 110v adaptor

Technical Specifications:

• Length: 33.4 in / 847 mm

• Width: 8.9 in / 225 mm

• Height: 10.3 in / 262 mm

• Weight: 39.0 lbs / 17.7 kg

• Cutter Opening: 5.9 in / 150 mm

• NFPA Cutter Rating: A7/B8/C6/D7/E7

• NFPA 1936 2010 Compliant: Yes

8 0 0 . 5 3 7. 2 6 5 9 • 7 11 N . P O S T R O A D S H E L B Y, N C 2 8 15 0 • J A W S O F L I F E . C O M

part #: 272095000

©2014 Hurst Jaws of Life® • Sheet# S311E2 - 04.14

S 311E2 CUTTER

This 34-pound Tactical Combi is a lightweight superhero. And with no hose or power unit, you can get to the job of cutting, ripping and bending steel and saving lives fast. It’s perfect for any rescue situation.

Good things do come in small packages.

Features and Benefits:

• Smaller and lighter than its predecessor

• Perfect for police, military, and first responder teams

• Ergonomically designed star-grip permits tool actuation from almost any gripping position

• Each tool comes with two batteries and one charger

• If needed, you can plug it in for limitless power with a 110v adaptor

Technical Specifications:

• Length: 33.4 in / 849 mm

• Width: 8.4 in / 215 mm

• Height: 10.3 in / 262 mm

• Weight: 34.4 lbs / 15.6 kg

• Spreading Distance: 12.6 in / 320 mm

• Max. Spreading Force: 157,366 lbs / 700 kN

• Max. Pulling Force: 7,644 lbs / 34 kN

• NFPA HSF: 6,520 lbs / 29 kN

• NFPA LSF: 5,400 lbs / 24 kN

• NFPA HPF: 8,320 lbs / 37 kN

• NFPA LPF: 6,290 lbs / 28 kN

• NFPA Cutter Rating: A6/B6/C6/D7/E7

• Cutter Opening: 12.6 in / 320 mm

• NFPA 1936 2010 Compliant: Yes

8 0 0 . 5 3 7. 2 6 5 9 • 7 11 N . P O S T R O A D S H E L B Y, N C 2 8 15 0 • J A W S O F L I F E . C O M

part #: 273025000

©2014 Hurst Jaws of Life® • Sheet# SC250E2 - 04.14

SC 250E2 COMBI TOOL

The SC 357E2 uses a compact, single integrated design to house a tool that does so much. It cuts; it spreads; it’s perfect for first responders who need to be ready to accomplish anything. And do it fast.

It combines cutting, spreading and being awesome.

Features and Benefits:

• Newly designed hydraulic pump

• More power reserve for the unexpected

• Dead man control valve reverts to neutral position if worker’s hand slips

• Dual pilot check valve sustains load requirements if hydraulic flow is interrupted

• Ergonomically designed star grip permits tool actuation from almost any gripping position

• Fast opening and closing action for increased speed during time-critical rescues

Technical Specifications:

• Length: 36.6 in / 929 mm

• Width: 8.8 in / 225 mm

• Height: 10.3 in / 262 mm

• Weight: 41.4 in / 18.8 mm

• Spreading Distance: 14.5 in / 368 mm

• Max. Spreading Force: 225,483 lbs / 1,003 kN

• Max. Pulling Force: 10,791 lbs / 48 kN

• NFPA HSF: 9,440 lbs / 42 kN

• NFPA LSF: 7,190 lbs / 32 kN

• NFPA HPF: 12,400 lbs / 55 kN

• NFPA LPF: 8,770 lbs / 39 kN

• NFPA Cutter Rating: A7/B7/C7/D7/E7

• Cutter Opening: 10.8 in / 274 mm

• NFPA 1936 2010 Compliant: Yes

8 0 0 . 5 3 7. 2 6 5 9 • 7 11 N . P O S T R O A D S H E L B Y, N C 2 8 15 0 • J A W S O F L I F E . C O M

part #: 273045000

©2014 Hurst Jaws of Life® • Sheet# SC357E2 - 04.14

SC 357E2 COMBI TOOL

With no hoses, no power unit and no setup time this newly designed spreader is lighter, smaller and lets nothing get in your way. Its “diamond” surface tips not only have excellent grip but are designed extremely flat to penetrate the narrowest gaps. This tool is quite frankly the perfect combination of strength, spreading distance and speed – helping it blow past the competition.

Bends metal. Removes hassles.

Features and Benefits:

• Newly designed hydraulic pump provides weight reduction

• Max spreading force has increased by 14.4 percent

• Perfect for confined space, structural collapse

• Diamond tip, standard

• Ergonomically designed star-grip permits tool actuation from almost any gripping position

• Each tool comes with two batteries and one charger

• If needed, you can plug it in for limitless power with a 110v adaptor

Technical Specifications:

• Length: 34.7 in / 881 mm

• Width: 14.0 in / 355 mm

• Height: 10.3 in / 262 mm

• Weight: 43.9 lbs / 19.9 kg

• Max. Spreading Distance: 23.9 in / 608 mm

• Max. Spreading Force: 32,600 lbs / 145 kN

• Max. Pulling Force: 6,300 lbs / 28 kN

• NFPA HSF: 9,000 lbs / 40 kN

• NFPA LSF: 7,400 lbs / 33 kN

• NFPA HPF: 4,720 lbs / 21 kN

• NFPA LPF: 4,050 lbs / 18 kN

• NFPA 1936 2010 Compliant: Yes

8 0 0 . 5 3 7. 2 6 5 9 • 7 11 N . P O S T R O A D S H E L B Y, N C 2 8 15 0 • J A W S O F L I F E . C O M

part #: 271080000

©2014 Hurst Jaws of Life® • Sheet# SP300E2 - 04.14

SP 300E2 SPREADER

The superior ergonomics, durable construction and “diamond” surface tips make this tool the beast of the eDRAULIC™ spreader line. Its strength makes it perfect for urban disaster recovery and traffic accidents.

An extra-strength spreader for extra-strength rescues.

Features and Benefits:

• Newly developed hydraulic pump provides extra power

• Dead man control valve reverts to neutral position if worker’s hand slips from control

• Dual pilot check valve sustains load requirements if hydraulic flow is interrupted

• Ergonomically designed star grip permits tool actuation from almost any gripping

Technical Specifications:

• Length: 37.6 in / 955 mm

• Width: 13.6 in / 345 mm

• Height: 10.9 in / 276 mm

• Weight: 52.7 lbs / 23.9 kg

• Spreading Distance: 28.5 in / 725 mm

• Max. Spreading Force: 72,800 lbs / 324 kN

• Max. Pulling Force: 9,900 lbs / 44 kN

• NFPA HSF: 13,000 lbs / 58 kN

• NFPA LSF: 10,300 lbs / 46 kN

• NFPA HPF: 7,600 lbs / 34 kN

• NFPA LPF: 5,800 lbs / 26 kN

• NFPA 1936 2010 Compliant: Yes

8 0 0 . 5 3 7. 2 6 5 9 • 7 11 N . P O S T R O A D S H E L B Y, N C 2 8 15 0 • J A W S O F L I F E . C O M

part #: 271085000

©2014 Hurst Jaws of Life® • Sheet# SP310E2 - 04.14

SP 310E2 SPREADER