Specifications - Moen• Engineered polymers, non-ferrous and stainless steel materials STANDARDS...

3
Specifications DESCRIPTION Metal construction with various finishes identified by suffix Duralock™ Quick connect installation Pulldown spray with 68" braided hose 3/8" compression connections will accept standard ball nose connection for 3/8" tubing High arc spout provides height and reach to fill or clean large pots while the pulldown wand provides the maneuverability for cleaning or rinsing OPERATION Lever style handle Operates with less than 5 lbs. of force Operates in stream or spray mode in the pulldown or retracted position FLOW Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, CARTRIDGE 1255™ Duralast™ cartridge for Single-Handle Faucets Engineered polymers, non-ferrous and stainless steel materials STANDARDS Designed and manufactured to comply with the requirements of: ASME A112.18.1/CSA B-125.1, NSF 61 Section 9, California Proposition 65 Complies with California Proposition 65 and with the Federal Safe Drinking Water Act ADA for lever handles The backflow protection system in this device consists of two independently operating check valves, a primary and a secondary which pre- vent backflow WARRANTY Lifetime limited warranty against leaks, drips and finish defects to the original homeowner 10 year limited warranty when used in a multifamily installation 5 year limited warranty when used in a commercial installation Visit www.moen.com/support for complete details and limitations Harlon™ Single Handle High Arc Pull Out Kitchen Faucet Model: 87499 series NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1, 3 or 4 HOLES, 1-1/2" (38mm) MIN. DIA. FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 12/16 16" (406mm) 2-7/8" (73mm) min. clearance 8-9/16" (217mm) 10-1/4" (260mm) 2-1/2" max deck thickness 5-3/4" (147mm) There is more than 1 version of this model. Page down to identify the version you have.

Transcript of Specifications - Moen• Engineered polymers, non-ferrous and stainless steel materials STANDARDS...

Page 1: Specifications - Moen• Engineered polymers, non-ferrous and stainless steel materials STANDARDS • Designed and manufactured to comply with the requirements of: ASME A112.18.1/CSA

Specifications

DESCRIPTION• Metal construction with various finishes identified by suffix • Duralock™ Quick connect installation• Pulldown spray with 68" braided hose• 3/8" compression connections will accept standard ball nose connection

for 3/8" tubing• High arc spout provides height and reach to fill or clean large pots while

the pulldown wand provides the maneuverability for cleaning or rinsingOPERATION• Lever style handle• Operates with less than 5 lbs. of force• Operates in stream or spray mode in the pulldown or retracted positionFLOW• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle Faucets• Engineered polymers, non-ferrous and stainless steel materialsSTANDARDS• Designed and manufactured to comply with the requirements of:

ASME A112.18.1/CSA B-125.1, NSF 61 Section 9, California Proposition 65• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act• ADA for lever handles• The backflow protection system in this device

consists of two independently operating check valves, a primary and a secondary which pre-vent backflow

WARRANTY• Lifetime limited warranty against leaks, drips

and finish defects to the original homeowner• 10 year limited warranty when used in a

multifamily installation• 5 year limited warranty when used in a

commercial installationVisit www.moen.com/support for complete details and limitations

Harlon™Single Handle High Arc Pull Out

Kitchen Faucet

Model: 87499 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1, 3 or 4 HOLES, 1-1/2" (38mm) MIN. DIA.

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

Rev. 12/16

16"(406mm)

2-7/8"(73mm)

min.clearance

8-9/16"(217mm)

10-1/4"(260mm)

2-1/2" max deck thickness

5-3/4"(147mm)

There is more than 1 version of this model.Page down to identify the version you have.

Page 2: Specifications - Moen• Engineered polymers, non-ferrous and stainless steel materials STANDARDS • Designed and manufactured to comply with the requirements of: ASME A112.18.1/CSA

Specifications

DESCRIPTION• Metal construction with various finishes identified by suffix • Duralock™ Quick connect installation• Pulldown spray with 68" braided hose• 3/8" compression connections will accept standard ball nose connection for

3/8" tubing• High arc spout provides height and reach to fill or clean large pots while the

pulldown wand provides the maneuverability for cleaning or rinsingOPERATION• Lever style handle• Operates with less than 5 lbs. of force• Operates in stream or spray mode in the pulldown or retracted positionFLOW• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle Faucets• Engineered polymers, non-ferrous and stainless steel materialsSTANDARDS• Designed and manufactured to comply with the requirements of:

ASME A112.18.1/CSA B-125.1, NSF 61 Section 9, California Proposition 65• Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe Drinking Water Act• ADA for lever handles• The backflow protection system in this device consists of two independently

operating check valves, a primary and a secondary which prevent backflowWARRANTY• Lifetime limited warranty against leaks, drips

and finish defects to the original homeowner• 10 year limited warranty when used in a

multifamily installation• 5 year limited warranty when used in a

commercial installationVisit www.moen.com/support for complete details and limitations

Harlon™Single Handle High Arc Pull Out

Kitchen Faucet

Model: 87499 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1, 3 or 4 HOLES, 1-1/2" (38mm) MIN. DIA.(1 HOLE FOR SOAP DISPENSER)

(Model with soap dispenser effective prior to April 2016)

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

Rev. 12/16

16"(406mm)

2-7/8"(73mm)

min.clearance

8-9/16"(217mm)

10-1/4"(260mm)

2-1/2" max deck thickness

5-3/4"(147mm)

2-5/8"(66mm)

9-7/8"

2"(51mm)

Page 3: Specifications - Moen• Engineered polymers, non-ferrous and stainless steel materials STANDARDS • Designed and manufactured to comply with the requirements of: ASME A112.18.1/CSA

Specifications

DESCRIPTION• Metal construction with various finishes identified by suffix • Quick connect installation• Pulldown spray with 68" braided hose• 3/8" compression connections will accept standard ball nose connection for

3/8" tubing• High arc spout provides height and reach to fill or clean large pots while the

pulldown wand provides the maneuverability for cleaning or rinsingOPERATION• Lever style handle• Operates with less than 5 lbs. of force• Operates in stream or spray mode in the pulldown or retracted positionFLOW• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle Faucets• Engineered polymers, non-ferrous and stainless steel materialsSTANDARDS• Designed and manufactured to comply with the requirements of:

ASME A112.18.1/CSA B-125.1, NSF 61 Section 9, California Proposition 65• Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe Drinking Water Act• ADA for lever handles• The backflow protection system in this device consists of two independently

operating check valves, a primary and a secondary which prevent backflowWARRANTY• Lifetime limited warranty against leaks, drips

and finish defects to the original homeowner• 10 year limited warranty when used in a

multifamily installation• 5 year limited warranty when used in a

commercial installationVisit www.moen.com/support for complete details and limitations

Harlon™Single Handle High Arc Pull Out

Kitchen Faucet

Model: 87499 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1, 3 or 4 HOLES, 1-1/2" (38mm) MIN. DIA.(1 HOLE FOR SOAP DISPENSER)

(Model with soap dispenser effective prior to April 2016)

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

Rev. 12/16

16"(406mm)

2-7/8"(73mm)

min.clearance

8-9/16"(217mm)

10-1/4"(260mm)

2-1/2" max deck thickness

5-3/4"(147mm)

2-5/8"(66mm)

9-7/8"(250mm)

2"(51mm)