Specification SWAA05 - dzsc.com · Z-Power LED X10490 Technical Data Sheet Rev. 1.00 May 2009...

Z-Power LED X10490

Z-Power LED X10490

Technical Data Sheet

Rev. 1.00 Rev. 1.00

May 2009May 2009

www.acriche.comwww.acriche.com

Document No. : SSC-QP-7-07-24 (Rev.00)

SpecificationSWAA05

CUSTOMER

Approved byChecked by

SUPPLIER

Approved byDrawn by

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



Contents

1. Description

2. Absolute Maximum Ratings

3. Electro-Optical Characteristics

4. Characteristic Diagram

5. Reliability Test Item and Condition

6. Rank of SWAA05

7. Material

8. Outline Dimension

9. Packing

10. Soldering

11. Precaution for Use

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



Revision HistoryRevision History

The institution of New Spec.December. 2120091.00

SummaryPage.DateRevision No.

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

April 2009April 2009



SWAA051.Description

• 1-chip in one package

• SMT solderability

• Own patent reserved

• RoHS Compliant

• Low Thermal Resistance

• Pb-free Reflow Soldering application

• SWAA05 is very useful side view LED in back light unit

application • Flat Backlighting (LCD, Display)

• Mobile Phone, Camera, PDA,

Notebook

• Coupling into Light Guide Panel

• AV systems

Features

Applications

SWAA05

• 2.8 (W) X 1.2 (D) X 0.8 (T) mm

• Side View LED of Reflector type

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



2. Absolute Maximum Ratings*1

ºC125TjJunction Temperature

ºC-40 ~ +100TstgStorage Temperature

ºC-30 ~ +85ToprOperating Temperature

V5VRReverse Voltage

mA100IFM *2Peak Forward Current

mA30IFForward Current

mW120PdPower Dissipation

UnitValueSymbolParameter

*1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.*2 IFM was measured at TW ≤ 0.1msec of pulse width and D ≤ 1/10 of duty ratio.

3. Electro-Optical Characteristics

1800-1700

IF =20mAIV

S17H

1600-1500S15H

1500-1400S14H

mcd

1400-1300S13H

Rank Z32

Rank Z30

3.4-3.2

3.2-3.0

1700-1600S16H

S12H

VF

Rank Z28

deg.120IF =20mA2θ ½Viewing Angle *2

1300-1200

Luminous Intensity*1

µA50--VR=5VIRReverse Current

V

3.0-2.8

IF =20mAForward Voltage

UnitMaxTypMinConditionSymbolParameter

*1 Luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanicalaxis of the LED package. Luminous Intensity Measurement allowance is ±10%.

*2 θ1/2 is the off-axis where the luminous intensity is 1/2 of the peak intensity. * Note : All products confirm to the listed minimum and maximum specifications for electric and optical characteristics,

when operated at 20mA within the maximum ratings shown above. * All measurements were made under the standardized environment of Seoul Semiconductor.

(Ta = 25℃)

(Ta = 25℃)

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



Radiation DiagramForward Current vs. Ambient Temperature

Intensity vs. Forward CurrentForward Current vs. Forward Voltage

4. Characteristic Diagram

(Ta=25 OC )

-30 -15 0 15 30 45 60 75 900

5

10

15

20

25

30

Forw

ard

cu

rren

t [m

A]

Ambient temperature [oC]

yx

2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4

1

10

Ta = 25OC

Forw

ard

Cu

rren

t [m

A]

Forward Voltage [V]

0 5 10 15 20 25 30 350

400

800

1200

1600

2000

2400

2800 Ta = 25OC

Inte

nsi

ty [

mcd

]

Forward Current [mA]

-100 -80 -60 -40 -20 0 20 40 60 80 1000.0

0.5

1.0 Ta = 25OC x axis y axis

Inte

nsi

ty

Theta

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



Color Coordinate vs. Ambient TemperatureForward Voltage vs. Ambient Temperature

Spectrum Color Coordinate vs. Forward Current

0.295 0.296 0.297 0.298 0.2990.279

0.280

0.281

0.282

0.283

0.284

20 mA

15 mA

10 mA

5 mA

Ta = 25OC

1 mA

30 mA

y C

oord

.

x Coord.

400 500 600 700 800

Ta = 25OC IF = 20 mA

Inte

nsi

ty [

%]

Wavelength [nm]

-30 -15 0 15 30 45 60 75 900.80

0.85

0.90

0.95

1.00

1.05

1.10

1.15

1.20 IF = 20 mA

VF

/ VF

[2

5OC

]

Ambient Temperature [oC]0.27 0.28 0.29 0.30 0.31

0.26

0.27

0.28

0.29

0.30

45oC

65oC

25oC

IF = 20 mA

y C

oord

.

x Coord.

-30oC

85oC

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



Allowable Forward Current vs. Duty Ratio Relative Luminosity vs. Ambient Temperature

1 10 100

20

40

60

80

100

120

Ta = 25OC

Allo

wab

le F

orw

ard

Cu

rren

t [

mA

]

Duty Ratio [%]

(If = 20mA )

-30 -15 0 15 30 45 60 75 900.7

0.8

0.9

1.0

1.1

1.2

I v /

I v

[25o C

]

Ambient Temperature [oC]

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



0/5010 cycle25℃ ~ 65℃ ~ -10℃TH = 90%, 24 hr / 1 cycle

JEITA ED-4701200 203

Moisture Resistance Cycle

0/50100 cycle-40℃ ~ 25℃ ~ 100℃ ~ 25℃(30min) (5min) (30min) (5min)

JEITA ED-4701100 105Temperature Cycle

0/501 timesover 95%

Tsld = 215±5℃, 3 sec(Lead Solder)

JEITA ED-4701303

Solder Ability(Reflow Soldering)

0/502 timesTsld = 260℃, 10 secpre treatment ; 30℃, 70%, 168hrs

JEITA ED-4701301 302

Resistance to Soldering Heat

0/20500Hours

Ta = 60℃, RH = 90%, IF = 20mAJEITA ED-4701100 102

High Humidity Heat Life Test

0/201,000 HoursTa = 85℃, RH = 85%JEITA ED-4701

100 103Humidity Heat

Load

0/201,000 HoursTa = -40℃

JEITA ED-4701200 202

Low Temperature Storage

0/5020 CycleTa = -30℃ (30MIN) ~ 85℃ (30MIN)JEITA ED-4701300 307Thermal Shock

0/201,000 HoursTa = 85℃, IF = 5mA-High Temperature

Life Test

0/201,000 Hours

Ta = -30℃, IF = 20mA-Low Temperature Life Test

0/20500Hours

Ta = 25℃, IF = 30mAJEITA ED-4701100 101

Life Test 2

0/201,000 HoursTa = 100℃

JEITA ED-4701200 201

High Temperature Storage

0/201,000 Hours

Ta = 25℃, IF = 20mAJEITA ED-4701100 101

Life Test 1

Number of Damage

Duration/ Cycle

Test ConditionReferenceItem

-LSL*2 × 0.5IF =20mAIVLuminous Intensity

USL × 2.0-VR=5VIRReverse Current

USL*1 × 1.2-IF =20mAVFForward Voltage

MAXMIN

Criteria for JudgmentConditionSymbolItem

Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level

* Criteria for Judging the Damage

5. Reliability Test

* Test Items and Results

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



* CIE Chromaticity Diagram

6. Rank of SWAA05

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

460470

475480

485

490

495

500

505

510

515520525

530535

540545

550555

560565

570575

580585

590595

600610

620630830

y C

oord

.

x C o o r d .

0.290

0.304

0.315

0.301

Y

0.304

0.312

0.307

0.299

x

I2S

0.27600.29600.26200.28800.24800.2800

0.29000.30400.27600.29600.26200.2880

0.30100.29900.28700.29100.27200.2820

0.28700.29100.27200.28200.25700.2730

yxyxyx

G2SE2SC2S

* Color Rank

0.26 0.28 0.30 0.32 0.340.22

0.24

0.26

0.28

0.30

0.32

0.34

I2S

G2S

E2S

C2S

y C

oord

.

x C o o r d .

ChipEncapsulateWireReflectorItem

GaNSiliconeGoldPPAMaterial

7. Material

* Measurement Uncertainty of the Color Coordinates is ±0.01

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



( Tolerance: ±0.1, Unit: mm )

8. Outline Dimension

[Bottom View]

<Recommended solder Pattern>

Cathode Anode

Cathode Mark MOLD GATE

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



(1) Quantity : 3500pcs/Reel(2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned

off from the carrier tape at the angle of 10º to the carrier tape(4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package

( Tolerance: ±0.2, Unit: mm )

Label

1809

11.4

2

13 ±0.2

22

±0.260

-0

+0.2

-3+0

±0.3

9. Packing

SECTION B-B'

Cathode

+0.1

Anode

-0 2.0±0.05

8.0

±0.0

5

4.0±0.1

4.0±0.1

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



ExampleMeaningSymbol

8 for 2008, 9 for 2009, 10 for 2010 ‥‥Year○

01 for Jan., 02 for Feb., ‥‥ 12 for Dec.Month□□

01, 02, 03, 04, 05, ‥‥ 27, 28, 29, 30, 31Day◎◎

001, 002, 003, 004, 005, 006, 007 ‥‥Number◇◇◇

SWAA05 ○□□◎◎ ◇◇◇

• Lot NumberThe lot number is composed of the following characters

LOT NUMBER : XXXXXXXX

Material : Paper(SW3B(B))

SSC PART NUMBER : XXXXXXXX

SEOUL AcricheSemiconductor EcoLight

RoHS

TUV

a

MADE IN KOREA

TYPE

b 7inch

c

SIZE (mm)

220245245 220

a b14280

c

QUANTITY : XXXX

Barcode Label

Reel

RANK :

Outer Box Structure

XXX

Humidity indicator

Desiccant

Aluminum Vinyl Bag

SWAF05SWAA05

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



Preliminary heating to be at maximum 220°C for maximum 2 minutes.Soldering heat to be at maximum 260°C for maximum 10 seconds.

(1) Lead Solder

(2) Lead-Free Solder

(3) Hand Soldering conditions

Not more than 5 seconds @MAX 300°C, under Soldering iron.

Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products.

Preliminary heating to be at maximum 210°C for maximum 2 minutes.Soldering heat to be at maximum 240°C for maximum 10 seconds.

0 15 30 45 60 75 90 105 120 135 150 165 180 1950

40

80

120

160

200

240

280

Soldering Times [sec]

Dev

ice

Surf

ace

Tem

pera

ture

[o C]

0 15 30 45 60 75 90 105 120 135 150 165 180 1950

40

80

120

160

200

240

280

Dev

ice

Surf

ace

Tem

pera

ture

[o C]

Soldering Times [sec]

10. Soldering

Z-Power LED X10490

Z-Power LED X10490


Rev. 1.00 Rev. 1.00

May 2009May 2009



11. Precaution for Use

(1) Storage conditions

• Keep the product in a dry box or a desiccator with a desiccant in order to prevent moisture absorption.a. Keep it at a temperature in the range from 5°C to 30°C and at a humidity of less

than 50% RH.• In case of being stored for more than 3 months, the product should be sealed with

Nitrogen gas.

(2) After opening the package .

• When soldering, this could result in a decrease of the photoelectric effect or light intensity.a. Soldering should be done right after mounting the product.b. Keep the temperature in the range from 5°C to 30°C and the humidity at less

than 30%.• Soldering should be done within 7 days after opening the desiccant package.

If the product has been exposed for more than 7 days after opening the package or the indicating color of the desiccator changes, the product must be baked at a temperature between 65 ± 5°C for 10 to 24 hours.

• An unused and unsealed product should be repacked in a desiccant package and kept sealed in a dry atmosphere.

(3) Precautions for use

• Any external mechanical force or excessive vibration should not be applied to the product during cooling after soldering, and it is preferable to avoid rapid cooling.

• The product should not be mounted on a distorted part of PCB.• Gloves or wrist bands for ESD(Electric Static Discharge) should be wore in order to

prevent ESD and surge damage, and all devices and equipments must be grounded to the earth.

(4) Miscellaneous

• Radiation resistance is not considered.• When cleaning the product, any kind of fluid such as water, oil and organic solvent

must not be used and IPA(Isopropyl Alcohol) must be used.• When using the product, operating current should be settled in consideration of the

maximum ambient temperature.• Its appearance or specification for improvement is subject to change without notice.

Specification SWAA05 - dzsc.com · Z-Power LED X10490 Technical Data Sheet Rev. 1.00 May 2009...

Documents

Transcript of Specification SWAA05 - dzsc.com · Z-Power LED X10490 Technical Data Sheet Rev. 1.00 May 2009...