Specification Sheet / In-grade / L09

All technical information in this document is subject to change. Copyright © MP Lighting.www.mplighting.com t 1.877.708.1184 f 604.708.1185

L09Application Interior directional in-grade light for lighting walls, columns,

architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required. Suitable for walk-over and drive-over applications. Recommended Projects - Commercial, Institutional, Retail, Clinic, Hospitality, Religious, Educational, Architecture

IP Rating 40

Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.

Electrical Powered by remote dimmable/non-dimmable driver( sold separately ).

*See website for recommended drivers *Remote emergency driver / inverter options available. Consult factory

Power Consumption

1.5 Watt (at 350 mA, 1.0 Watt)

3.0 Watt (at 700 mA, 2.5 Watt)

Light Output 1.0 Watt, 0.5~1lm2.5 Watt, 0.8~1.6lm

*For photometric data, see page 02

Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.

Material Solid anodized aluminum or stainless steel (316). RoHS compliant.

Weight 1.8lbs (0.816kg), base extra.

Approval

11-2017

Code Wattage Color Aperture Input Voltage Finish

L09 - -

1 = 1W 2 = 2.5W

S = singleD = double

D = DC A = 12V AC(AC available for W27S, W30S and W35S only)

MA = matte clear anodizedBA = black anodizedBZ = bronze anodizedS6 = stainless steel 316

W22S = 2200K, 80+CRIW27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW20H = 2000K, 90+CRIW27H = 2700K, 90+CRIW30H = 3000K, 90+CRIW35H = 3500K, 90+CRI

Type:

Project:

Modified:

Quantity:

Notes:

Order Guide

Example: L09-2-W30-S-D-A-MA

DISCLAIMER - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers.

*MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products.

Ø1-5/8”Ø41mm

Ø4-1/8”Ø105mm

1/4”6mm

Standard flange7/8” (22mm)

Ø2-1/2”Ø64mm

Concrete pouring line

Base Height

4-7/8”124mm

2-3/4”70mm

Splice box with 1/2 NPT I/O ports for connector and wiring.

2”52mm

pavingstone

sand

5-1/2”140mm

Paving stoneflange3-5/8” (92mm)

Double aperture Single aperture

Specification Sheet / In-grade / L09

All technical information in this document is subject to change. Copyright © MP Lighting. 01-2018www.mplighting.com t 1.877.708.1184 f 604.708.1185

PHOTOMETRIC DATA:

DIMENSION:

1W, 3000K 80+CRI 2.5W, 3000K 80+CRI

0.5lm, Single Aperture 0.8lm, Single Aperture

1lm, Double Aperture 1.6lm, Double Aperture

Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance

0°

180°

90°

45°-45°

-90°approx. 0.3 cdmax.

-0°

-90°

Mount height: 1 ft Total LLF: 1

2

1

0

1

2

2 1 0 1 2

0.05 fc

L081W, DoubleAperture3000K Std1 lm

Polar Candela Distribution Isofootcandle Plot

approx. 0.4 cdmax.

0°

180°

90°

45°-45°

-90°-0°

-90°

Mount height: 1 ft Total LLF: 1

2

1

0

1

2

2 1 0 1 2

0.05 fc

L082.5W, SingleAperture3000K Std0.8 lm

Polar Candela Distribution Isofootcandle Plot

approx. 0.4 cdmax.

0°

180°

45°

90°-90°

-45°-0°

-90°

Mount height: 1 ft Total LLF: 1

2

1

0

1

2

2 1 0 1 2

0.05 fc

L082.5W, Double Aperture3000K Std1.6 lm

Polar Candela Distribution Isofootcandle Plot

0°

180°

90°

45°-45°

-90°-0°

-90°

approx. 0.3 cdmax.

Mount height: 1 ft Total LLF: 1

2

1

0

1

2

2 1 0 1 2

0.05 fc

L081W, SingleAperture3000K Std0.5 lm

Polar Candela Distribution Isofootcandle Plot

pavingstone

sand

Paving stoneflange3-5/8” (91.2mm)

Ø1-7/8”Ø49mmØ5-1/2”

Ø140mm

Ø1-5/8”Ø41mm

trim3/16”5mm

Ø2-1/2”Ø64mm

2”51mm

2-3/4”70.8mm

7/8”22mm

Ø6-1/2”Ø165mm

Ø1-7/8”Ø49mm

Base Height

Ø6-1/2”Ø165mm

flange is positioned1/8”(3.17mm) max away

from the surface of dry wall

Electrical Box (site supplied)

surface of dry wallflange

Ø2-1/2”64mm

1-1/8”28.6mm

1-5/8”41mm

flange

Electrical Box (site supplied)

1-5/8”41mm

3-1/2”89mm

Ø4-1/8”Ø105mm

1-3/4”44mm

7/8”

Ø2-1/2”Ø64mm

Sq.7/8”22mm

Ø1-1/8”Ø29mm

Ø1-7/8”Ø48mm

Ø1-5/8”Ø41mm

1-15/16”49.5mm

Ø2-1/2”Ø62mm

trim 1/8”3.18mm

flange is positioned1/8”(3.17mm) max away

from the surface of dry wall