SPECIFICATION SHEET AIR SEA BIOJAR™ 1.5 LITRE - IP2 INNER ... · air sea biojar™ 1.5 litre -...
Transcript of SPECIFICATION SHEET AIR SEA BIOJAR™ 1.5 LITRE - IP2 INNER ... · air sea biojar™ 1.5 litre -...
AIR SEA BIOJAR™ 1.5 LITRE - IP2 INNER PACKAGING
AIR SEA CONTAINERS LTD.
SPECIFICATION SHEET
INNER IP2PACKAGING
CODE:490HIGH PERFORMANCEPOLYPROPYLENE JAR
AND SEALED CLOSURE
SUITABLE FOR MOSTCORROSIVES AND
TOXIC SUBSTANCES
NOTES:The BioJar™ has a NominalCapacity of 1.5 Litres, and iscapable of withstanding
95 kPa (1 Bar)The closure is internallythreaded polypropylene whichis secured tightly by the use ofthe handle at the head. Thestandard bung seal is EPDM.
This container is suitable for:Flammable Liquids (Class 3)Flammable Solids (Class 4)Oxydizing Agents (Class 5)Peroxides (Class 5)Toxics (Class 6.1)Infectious
Substances (Class 6.2)Some Radioactives (Class 7)Most Corrosives (Class 8)
It is the Shippers responsibilityto ensure that products arecompatible with theircontainers and closures.
This BioJar™ Jar may betransported in a variety of outerpackagings and can be usedas a Primary Receptacle orSecondary Packaging underICAO/IATA PackingInstruction 620 for InfectiousSubstances and under IATAPacking Instruction 650 forDiagnostic Specimens.
Further details on Request.
A FULLY AUTOCLAVABLE POLYPROPYLENE CONTAINERCAPABLE OF WITHSTANDING 95kPa.
NOMINAL DIMENSIONSRadius 60mm Body Wall Thickness: 3mmInternal Diameter: 120mm Aperture Wall Thickness: 6mmExternal Diameter: 150mm Bung Size: 135mmExternal Height: 160mm Overall Weight: 284gInternal Height: 155mm Nominal Capacity: 1.5 LitreOverall Height: 190mm Brimful Capacity: 1.6 Litre
CAUTION! DRY ICE MUST NOTBE PACKED IN THE BIOJAR™
OTHER OPTIONAL ACCESSORIES
CODE 485122 x 10mm E.P.E.LAYER PAD
CODE 486122 x 25mm E.P.E.LAYER PAD
CODE 489122 x 25mm E.P.E.SPECIMEN HOLDER7 x 28mm holesOR 7 x 34mm holes(CODE 493)
CODE 483122 x 25mm E.P.E.SPECIMEN HOLDER25 x 12mm holes
CODE 484122 x 25mm E.P.E.SPECIMEN HOLDER50 x 7.5mm holes
BioJar™POLYPROPYLENECLOSURE WITHEPDM SEAL& Built-in torque handle
SEAL LUG
OptionalTamper-EvidentSeal (CODE 499)
PolypropyleneBioJar™CONTAINERCapable ofwithstanding95kPa.
Flat Base
CROSS SECTION OF FLUSH CLOSURE
EPDMSeal
HandleReinforcing
BossLip
3mm Walls
120mm
521 Cavendish StreetBirkenhead, CH41 8FZ
Unted KngdomTel: +44 (0) 151 653 1500Fax: +44 (0) 151 653 1515
Web site: www.air-sea.co.ukE-mail: [email protected]